summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/card/block.c24
-rw-r--r--drivers/mmc/card/sdio_uart.c2
-rw-r--r--drivers/mmc/core/core.c4
-rw-r--r--drivers/mmc/core/host.c24
-rw-r--r--drivers/mmc/core/mmc.c4
-rw-r--r--drivers/mmc/host/dw_mmc-rockchip.c72
-rw-r--r--drivers/mmc/host/dw_mmc.c12
-rw-r--r--drivers/mmc/host/sdhci-acpi.c13
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c2
-rw-r--r--drivers/mmc/host/sdhci-of-at91.c2
-rw-r--r--drivers/mmc/host/sdhci-pci-core.c5
-rw-r--r--drivers/mmc/host/sdhci.c4
-rw-r--r--drivers/mmc/host/sunxi-mmc.c9
13 files changed, 140 insertions, 37 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index ddc96206288a..e62fde3ac431 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -618,6 +618,10 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev,
ioc_err = __mmc_blk_ioctl_cmd(card, md, idata);
+ /* Always switch back to main area after RPMB access */
+ if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
+ mmc_blk_part_switch(card, dev_get_drvdata(&card->dev));
+
mmc_put_card(card);
err = mmc_blk_ioctl_copy_to_user(ic_ptr, idata);
@@ -685,6 +689,10 @@ static int mmc_blk_ioctl_multi_cmd(struct block_device *bdev,
for (i = 0; i < num_of_cmds && !ioc_err; i++)
ioc_err = __mmc_blk_ioctl_cmd(card, md, idata[i]);
+ /* Always switch back to main area after RPMB access */
+ if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
+ mmc_blk_part_switch(card, dev_get_drvdata(&card->dev));
+
mmc_put_card(card);
/* copy to user if data and response */
@@ -748,16 +756,25 @@ static inline int mmc_blk_part_switch(struct mmc_card *card,
if (mmc_card_mmc(card)) {
u8 part_config = card->ext_csd.part_config;
+ if (md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ mmc_retune_pause(card->host);
+
part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK;
part_config |= md->part_type;
ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_PART_CONFIG, part_config,
card->ext_csd.part_time);
- if (ret)
+ if (ret) {
+ if (md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ mmc_retune_unpause(card->host);
return ret;
+ }
card->ext_csd.part_config = part_config;
+
+ if (main_md->part_curr == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ mmc_retune_unpause(card->host);
}
main_md->part_curr = md->part_type;
@@ -2519,11 +2536,12 @@ static const struct mmc_fixup blk_fixups[] =
MMC_QUIRK_BLK_NO_CMD23),
/*
- * Some Micron MMC cards needs longer data read timeout than
- * indicated in CSD.
+ * Some MMC cards need longer data read timeout than indicated in CSD.
*/
MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
MMC_QUIRK_LONG_READ_TIME),
+ MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_LONG_READ_TIME),
/*
* On these Samsung MoviNAND parts, performing secure erase or
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 5415056f9aa5..5af6fb9a9ce2 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -895,7 +895,7 @@ static void sdio_uart_set_termios(struct tty_struct *tty,
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
unsigned int mask = TIOCM_DTR;
- if (!(cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags))
+ if (!(cflag & CRTSCTS) || !tty_throttled(tty))
mask |= TIOCM_RTS;
sdio_uart_set_mctrl(port, mask);
}
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 99275e40bf2f..8b4dfd45433b 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -875,11 +875,11 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
/*
* Some cards require longer data read timeout than indicated in CSD.
* Address this by setting the read timeout to a "reasonably high"
- * value. For the cards tested, 300ms has proven enough. If necessary,
+ * value. For the cards tested, 600ms has proven enough. If necessary,
* this value can be increased if other problematic cards require this.
*/
if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
- data->timeout_ns = 300000000;
+ data->timeout_ns = 600000000;
data->timeout_clks = 0;
}
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index e0a3ee16c0d3..1be42fab1a30 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -68,8 +68,32 @@ void mmc_retune_enable(struct mmc_host *host)
jiffies + host->retune_period * HZ);
}
+/*
+ * Pause re-tuning for a small set of operations. The pause begins after the
+ * next command and after first doing re-tuning.
+ */
+void mmc_retune_pause(struct mmc_host *host)
+{
+ if (!host->retune_paused) {
+ host->retune_paused = 1;
+ mmc_retune_needed(host);
+ mmc_retune_hold(host);
+ }
+}
+EXPORT_SYMBOL(mmc_retune_pause);
+
+void mmc_retune_unpause(struct mmc_host *host)
+{
+ if (host->retune_paused) {
+ host->retune_paused = 0;
+ mmc_retune_release(host);
+ }
+}
+EXPORT_SYMBOL(mmc_retune_unpause);
+
void mmc_retune_disable(struct mmc_host *host)
{
+ mmc_retune_unpause(host);
host->can_retune = 0;
del_timer_sync(&host->retune_timer);
host->retune_now = 0;
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index b81b08f81325..5d438ad3ee32 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1276,7 +1276,7 @@ static int mmc_select_hs200(struct mmc_card *card)
* switch to HS200 mode if bus width is set successfully.
*/
err = mmc_select_bus_width(card);
- if (!IS_ERR_VALUE(err)) {
+ if (err >= 0) {
val = EXT_CSD_TIMING_HS200 |
card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
@@ -1583,7 +1583,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
} else if (mmc_card_hs(card)) {
/* Select the desired bus width optionally */
err = mmc_select_bus_width(card);
- if (!IS_ERR_VALUE(err)) {
+ if (err >= 0) {
err = mmc_select_hs_ddr(card);
if (err)
goto free_card;
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index 8c20b81cafd8..358b0dc853b0 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -66,6 +66,70 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
/* Make sure we use phases which we can enumerate with */
if (!IS_ERR(priv->sample_clk))
clk_set_phase(priv->sample_clk, priv->default_sample_phase);
+
+ /*
+ * Set the drive phase offset based on speed mode to achieve hold times.
+ *
+ * NOTE: this is _not_ a value that is dynamically tuned and is also
+ * _not_ a value that will vary from board to board. It is a value
+ * that could vary between different SoC models if they had massively
+ * different output clock delays inside their dw_mmc IP block (delay_o),
+ * but since it's OK to overshoot a little we don't need to do complex
+ * calculations and can pick values that will just work for everyone.
+ *
+ * When picking values we'll stick with picking 0/90/180/270 since
+ * those can be made very accurately on all known Rockchip SoCs.
+ *
+ * Note that these values match values from the DesignWare Databook
+ * tables for the most part except for SDR12 and "ID mode". For those
+ * two modes the databook calculations assume a clock in of 50MHz. As
+ * seen above, we always use a clock in rate that is exactly the
+ * card's input clock (times RK3288_CLKGEN_DIV, but that gets divided
+ * back out before the controller sees it).
+ *
+ * From measurement of a single device, it appears that delay_o is
+ * about .5 ns. Since we try to leave a bit of margin, it's expected
+ * that numbers here will be fine even with much larger delay_o
+ * (the 1.4 ns assumed by the DesignWare Databook would result in the
+ * same results, for instance).
+ */
+ if (!IS_ERR(priv->drv_clk)) {
+ int phase;
+
+ /*
+ * In almost all cases a 90 degree phase offset will provide
+ * sufficient hold times across all valid input clock rates
+ * assuming delay_o is not absurd for a given SoC. We'll use
+ * that as a default.
+ */
+ phase = 90;
+
+ switch (ios->timing) {
+ case MMC_TIMING_MMC_DDR52:
+ /*
+ * Since clock in rate with MMC_DDR52 is doubled when
+ * bus width is 8 we need to double the phase offset
+ * to get the same timings.
+ */
+ if (ios->bus_width == MMC_BUS_WIDTH_8)
+ phase = 180;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ /*
+ * In the case of 150 MHz clock (typical max for
+ * Rockchip SoCs), 90 degree offset will add a delay
+ * of 1.67 ns. That will meet min hold time of .8 ns
+ * as long as clock output delay is < .87 ns. On
+ * SoCs measured this seems to be OK, but it doesn't
+ * hurt to give margin here, so we use 180.
+ */
+ phase = 180;
+ break;
+ }
+
+ clk_set_phase(priv->drv_clk, phase);
+ }
}
#define NUM_PHASES 360
@@ -233,10 +297,10 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
/* Common capabilities of RK3288 SoC */
static unsigned long dw_mci_rk3288_dwmmc_caps[4] = {
- MMC_CAP_ERASE,
- MMC_CAP_ERASE,
- MMC_CAP_ERASE,
- MMC_CAP_ERASE,
+ MMC_CAP_ERASE | MMC_CAP_CMD23,
+ MMC_CAP_ERASE | MMC_CAP_CMD23,
+ MMC_CAP_ERASE | MMC_CAP_CMD23,
+ MMC_CAP_ERASE | MMC_CAP_CMD23,
};
static const struct dw_mci_drv_data rk2928_drv_data = {
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 9dd1bd358434..2cc6123b1df9 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1431,7 +1431,7 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
int gpio_ro = mmc_gpio_get_ro(mmc);
/* Use platform get_ro function, else try on board write protect */
- if (!IS_ERR_VALUE(gpio_ro))
+ if (gpio_ro >= 0)
read_only = gpio_ro;
else
read_only =
@@ -1454,7 +1454,7 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
if ((mmc->caps & MMC_CAP_NEEDS_POLL) ||
(mmc->caps & MMC_CAP_NONREMOVABLE))
present = 1;
- else if (!IS_ERR_VALUE(gpio_cd))
+ else if (gpio_cd >= 0)
present = gpio_cd;
else
present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
@@ -2595,13 +2595,13 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
/* Useful defaults if platform data is unset. */
if (host->use_dma == TRANS_MODE_IDMAC) {
mmc->max_segs = host->ring_size;
- mmc->max_blk_size = 65536;
+ mmc->max_blk_size = 65535;
mmc->max_seg_size = 0x1000;
mmc->max_req_size = mmc->max_seg_size * host->ring_size;
mmc->max_blk_count = mmc->max_req_size / 512;
} else if (host->use_dma == TRANS_MODE_EDMAC) {
mmc->max_segs = 64;
- mmc->max_blk_size = 65536;
+ mmc->max_blk_size = 65535;
mmc->max_blk_count = 65535;
mmc->max_req_size =
mmc->max_blk_size * mmc->max_blk_count;
@@ -2609,7 +2609,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
} else {
/* TRANS_MODE_PIO */
mmc->max_segs = 64;
- mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
+ mmc->max_blk_size = 65535; /* BLKSIZ is 16 bits */
mmc->max_blk_count = 512;
mmc->max_req_size = mmc->max_blk_size *
mmc->max_blk_count;
@@ -2927,7 +2927,7 @@ static void dw_mci_enable_cd(struct dw_mci *host)
if (slot->mmc->caps & MMC_CAP_NEEDS_POLL)
return;
- if (IS_ERR_VALUE(mmc_gpio_get_cd(slot->mmc)))
+ if (mmc_gpio_get_cd(slot->mmc) < 0)
break;
}
if (i == host->num_slots)
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index b2d70ba6caa7..458ffb7637e5 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -274,7 +274,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
.chip = &sdhci_acpi_chip_int,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
- MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ MMC_CAP_WAIT_WHILE_BUSY,
.caps2 = MMC_CAP2_HC_ERASE_SZ,
.flags = SDHCI_ACPI_RUNTIME_PM,
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
@@ -289,7 +289,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
.caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ MMC_CAP_WAIT_WHILE_BUSY,
.flags = SDHCI_ACPI_RUNTIME_PM,
.pm_caps = MMC_PM_KEEP_POWER,
.probe_slot = sdhci_acpi_sdio_probe_slot,
@@ -301,7 +301,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_STOP_WITH_TC,
- .caps = MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ .caps = MMC_CAP_WAIT_WHILE_BUSY,
.probe_slot = sdhci_acpi_sd_probe_slot,
};
@@ -378,7 +378,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
acpi_handle handle = ACPI_HANDLE(dev);
- struct acpi_device *device;
+ struct acpi_device *device, *child;
struct sdhci_acpi_host *c;
struct sdhci_host *host;
struct resource *iomem;
@@ -390,6 +390,11 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
if (acpi_bus_get_device(handle, &device))
return -ENODEV;
+ /* Power on the SDHCI controller and its children */
+ acpi_device_fix_up_power(device);
+ list_for_each_entry(child, &device->children, node)
+ acpi_device_fix_up_power(child);
+
if (acpi_bus_get_status(device) || !device->status.present)
return -ENODEV;
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 2d300d87cda8..9d3ae1f4bd3c 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1011,7 +1011,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
if (ret)
return ret;
- if (!IS_ERR_VALUE(mmc_gpio_get_cd(host->mmc)))
+ if (mmc_gpio_get_cd(host->mmc) >= 0)
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
return 0;
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 25f779e09d8e..d4cef713d246 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -289,7 +289,7 @@ static int sdhci_at91_probe(struct platform_device *pdev)
* to enable polling via device tree with broken-cd property.
*/
if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE) &&
- IS_ERR_VALUE(mmc_gpio_get_cd(host->mmc))) {
+ mmc_gpio_get_cd(host->mmc) < 0) {
host->mmc->caps |= MMC_CAP_NEEDS_POLL;
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
}
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 97d4eebd6bf5..a4dbf7421edc 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -356,7 +356,6 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
- MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_WAIT_WHILE_BUSY;
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
@@ -372,15 +371,13 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
- MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_WAIT_WHILE_BUSY;
return 0;
}
static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST |
- MMC_CAP_WAIT_WHILE_BUSY;
+ slot->host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
slot->cd_con_id = NULL;
slot->cd_idx = 0;
slot->cd_override_level = true;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index e010ea4eb6f5..0e3d7c056cb1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1624,7 +1624,7 @@ static int sdhci_get_cd(struct mmc_host *mmc)
* Try slot gpio detect, if defined it take precedence
* over build in controller functionality
*/
- if (!IS_ERR_VALUE(gpio_cd))
+ if (gpio_cd >= 0)
return !!gpio_cd;
/* If polling, assume that the card is always present. */
@@ -3077,7 +3077,7 @@ int sdhci_add_host(struct sdhci_host *host)
if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
!(mmc->caps & MMC_CAP_NONREMOVABLE) &&
- IS_ERR_VALUE(mmc_gpio_get_cd(host->mmc)))
+ mmc_gpio_get_cd(host->mmc) < 0)
mmc->caps |= MMC_CAP_NEEDS_POLL;
/* If there are external regulators, get them */
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 7fc8b7aa83f0..2ee4c21ec55e 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -970,8 +970,8 @@ static const struct sunxi_mmc_clk_delay sun9i_mmc_clk_delays[] = {
[SDXC_CLK_400K] = { .output = 180, .sample = 180 },
[SDXC_CLK_25M] = { .output = 180, .sample = 75 },
[SDXC_CLK_50M] = { .output = 150, .sample = 120 },
- [SDXC_CLK_50M_DDR] = { .output = 90, .sample = 120 },
- [SDXC_CLK_50M_DDR_8BIT] = { .output = 90, .sample = 120 },
+ [SDXC_CLK_50M_DDR] = { .output = 54, .sample = 36 },
+ [SDXC_CLK_50M_DDR_8BIT] = { .output = 72, .sample = 72 },
};
static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
@@ -1129,11 +1129,6 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
MMC_CAP_1_8V_DDR |
MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;
- /* TODO MMC DDR is not working on A80 */
- if (of_device_is_compatible(pdev->dev.of_node,
- "allwinner,sun9i-a80-mmc"))
- mmc->caps &= ~MMC_CAP_1_8V_DDR;
-
ret = mmc_of_parse(mmc);
if (ret)
goto error_free_dma;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 16:38:42 +0100