diff options
Diffstat (limited to 'drivers/mtd/devices/doc2000.c')
| -rw-r--r-- | drivers/mtd/devices/doc2000.c | 1178 |
1 files changed, 0 insertions, 1178 deletions
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c deleted file mode 100644 index 363ec3c55d92..000000000000 --- a/drivers/mtd/devices/doc2000.c +++ /dev/null @@ -1,1178 +0,0 @@ - -/* - * Linux driver for Disk-On-Chip 2000 and Millennium - * (c) 1999 Machine Vision Holdings, Inc. - * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/errno.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/bitops.h> -#include <linux/mutex.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/doc2000.h> - -#define DOC_SUPPORT_2000 -#define DOC_SUPPORT_2000TSOP -#define DOC_SUPPORT_MILLENNIUM - -#ifdef DOC_SUPPORT_2000 -#define DoC_is_2000(doc) (doc->ChipID == DOC_ChipID_Doc2k) -#else -#define DoC_is_2000(doc) (0) -#endif - -#if defined(DOC_SUPPORT_2000TSOP) || defined(DOC_SUPPORT_MILLENNIUM) -#define DoC_is_Millennium(doc) (doc->ChipID == DOC_ChipID_DocMil) -#else -#define DoC_is_Millennium(doc) (0) -#endif - -/* #define ECC_DEBUG */ - -/* I have no idea why some DoC chips can not use memcpy_from|to_io(). - * This may be due to the different revisions of the ASIC controller built-in or - * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment - * this: - #undef USE_MEMCPY -*/ - -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf); -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf); -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, const u_char *buf); -static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); - -static struct mtd_info *doc2klist = NULL; - -/* Perform the required delay cycles by reading from the appropriate register */ -static void DoC_Delay(struct DiskOnChip *doc, unsigned short cycles) -{ - volatile char dummy; - int i; - - for (i = 0; i < cycles; i++) { - if (DoC_is_Millennium(doc)) - dummy = ReadDOC(doc->virtadr, NOP); - else - dummy = ReadDOC(doc->virtadr, DOCStatus); - } - -} - -/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ -static int _DoC_WaitReady(struct DiskOnChip *doc) -{ - void __iomem *docptr = doc->virtadr; - unsigned long timeo = jiffies + (HZ * 10); - - pr_debug("_DoC_WaitReady called for out-of-line wait\n"); - - /* Out-of-line routine to wait for chip response */ - while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) { - /* issue 2 read from NOP register after reading from CDSNControl register - see Software Requirement 11.4 item 2. */ - DoC_Delay(doc, 2); - - if (time_after(jiffies, timeo)) { - pr_debug("_DoC_WaitReady timed out.\n"); - return -EIO; - } - udelay(1); - cond_resched(); - } - - return 0; -} - -static inline int DoC_WaitReady(struct DiskOnChip *doc) -{ - void __iomem *docptr = doc->virtadr; - - /* This is inline, to optimise the common case, where it's ready instantly */ - int ret = 0; - - /* 4 read form NOP register should be issued in prior to the read from CDSNControl - see Software Requirement 11.4 item 2. */ - DoC_Delay(doc, 4); - - if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) - /* Call the out-of-line routine to wait */ - ret = _DoC_WaitReady(doc); - - /* issue 2 read from NOP register after reading from CDSNControl register - see Software Requirement 11.4 item 2. */ - DoC_Delay(doc, 2); - - return ret; -} - -/* DoC_Command: Send a flash command to the flash chip through the CDSN Slow IO register to - bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is - required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ - -static int DoC_Command(struct DiskOnChip *doc, unsigned char command, - unsigned char xtraflags) -{ - void __iomem *docptr = doc->virtadr; - - if (DoC_is_2000(doc)) - xtraflags |= CDSN_CTRL_FLASH_IO; - - /* Assert the CLE (Command Latch Enable) line to the flash chip */ - WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - if (DoC_is_Millennium(doc)) - WriteDOC(command, docptr, CDSNSlowIO); - - /* Send the command */ - WriteDOC_(command, docptr, doc->ioreg); - if (DoC_is_Millennium(doc)) - WriteDOC(command, docptr, WritePipeTerm); - - /* Lower the CLE line */ - WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - /* Wait for the chip to respond - Software requirement 11.4.1 (extended for any command) */ - return DoC_WaitReady(doc); -} - -/* DoC_Address: Set the current address for the flash chip through the CDSN Slow IO register to - bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is - required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ - -static int DoC_Address(struct DiskOnChip *doc, int numbytes, unsigned long ofs, - unsigned char xtraflags1, unsigned char xtraflags2) -{ - int i; - void __iomem *docptr = doc->virtadr; - - if (DoC_is_2000(doc)) - xtraflags1 |= CDSN_CTRL_FLASH_IO; - - /* Assert the ALE (Address Latch Enable) line to the flash chip */ - WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl); - - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - /* Send the address */ - /* Devices with 256-byte page are addressed as: - Column (bits 0-7), Page (bits 8-15, 16-23, 24-31) - * there is no device on the market with page256 - and more than 24 bits. - Devices with 512-byte page are addressed as: - Column (bits 0-7), Page (bits 9-16, 17-24, 25-31) - * 25-31 is sent only if the chip support it. - * bit 8 changes the read command to be sent - (NAND_CMD_READ0 or NAND_CMD_READ1). - */ - - if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) { - if (DoC_is_Millennium(doc)) - WriteDOC(ofs & 0xff, docptr, CDSNSlowIO); - WriteDOC_(ofs & 0xff, docptr, doc->ioreg); - } - - if (doc->page256) { - ofs = ofs >> 8; - } else { - ofs = ofs >> 9; - } - - if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) { - for (i = 0; i < doc->pageadrlen; i++, ofs = ofs >> 8) { - if (DoC_is_Millennium(doc)) - WriteDOC(ofs & 0xff, docptr, CDSNSlowIO); - WriteDOC_(ofs & 0xff, docptr, doc->ioreg); - } - } - - if (DoC_is_Millennium(doc)) - WriteDOC(ofs & 0xff, docptr, WritePipeTerm); - - DoC_Delay(doc, 2); /* Needed for some slow flash chips. mf. */ - - /* FIXME: The SlowIO's for millennium could be replaced by - a single WritePipeTerm here. mf. */ - - /* Lower the ALE line */ - WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, - CDSNControl); - - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - /* Wait for the chip to respond - Software requirement 11.4.1 */ - return DoC_WaitReady(doc); -} - -/* Read a buffer from DoC, taking care of Millennium odditys */ -static void DoC_ReadBuf(struct DiskOnChip *doc, u_char * buf, int len) -{ - volatile int dummy; - int modulus = 0xffff; - void __iomem *docptr = doc->virtadr; - int i; - - if (len <= 0) - return; - - if (DoC_is_Millennium(doc)) { - /* Read the data via the internal pipeline through CDSN IO register, - see Pipelined Read Operations 11.3 */ - dummy = ReadDOC(docptr, ReadPipeInit); - - /* Millennium should use the LastDataRead register - Pipeline Reads */ - len--; - - /* This is needed for correctly ECC calculation */ - modulus = 0xff; - } - - for (i = 0; i < len; i++) - buf[i] = ReadDOC_(docptr, doc->ioreg + (i & modulus)); - - if (DoC_is_Millennium(doc)) { - buf[i] = ReadDOC(docptr, LastDataRead); - } -} - -/* Write a buffer to DoC, taking care of Millennium odditys */ -static void DoC_WriteBuf(struct DiskOnChip *doc, const u_char * buf, int len) -{ - void __iomem *docptr = doc->virtadr; - int i; - - if (len <= 0) - return; - - for (i = 0; i < len; i++) - WriteDOC_(buf[i], docptr, doc->ioreg + i); - - if (DoC_is_Millennium(doc)) { - WriteDOC(0x00, docptr, WritePipeTerm); - } -} - - -/* DoC_SelectChip: Select a given flash chip within the current floor */ - -static inline int DoC_SelectChip(struct DiskOnChip *doc, int chip) -{ - void __iomem *docptr = doc->virtadr; - - /* Software requirement 11.4.4 before writing DeviceSelect */ - /* Deassert the CE line to eliminate glitches on the FCE# outputs */ - WriteDOC(CDSN_CTRL_WP, docptr, CDSNControl); - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - /* Select the individual flash chip requested */ - WriteDOC(chip, docptr, CDSNDeviceSelect); - DoC_Delay(doc, 4); - - /* Reassert the CE line */ - WriteDOC(CDSN_CTRL_CE | CDSN_CTRL_FLASH_IO | CDSN_CTRL_WP, docptr, - CDSNControl); - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - /* Wait for it to be ready */ - return DoC_WaitReady(doc); -} - -/* DoC_SelectFloor: Select a given floor (bank of flash chips) */ - -static inline int DoC_SelectFloor(struct DiskOnChip *doc, int floor) -{ - void __iomem *docptr = doc->virtadr; - - /* Select the floor (bank) of chips required */ - WriteDOC(floor, docptr, FloorSelect); - - /* Wait for the chip to be ready */ - return DoC_WaitReady(doc); -} - -/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */ - -static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip) -{ - int mfr, id, i, j; - volatile char dummy; - - /* Page in the required floor/chip */ - DoC_SelectFloor(doc, floor); - DoC_SelectChip(doc, chip); - - /* Reset the chip */ - if (DoC_Command(doc, NAND_CMD_RESET, CDSN_CTRL_WP)) { - pr_debug("DoC_Command (reset) for %d,%d returned true\n", - floor, chip); - return 0; - } - - - /* Read the NAND chip ID: 1. Send ReadID command */ - if (DoC_Command(doc, NAND_CMD_READID, CDSN_CTRL_WP)) { - pr_debug("DoC_Command (ReadID) for %d,%d returned true\n", - floor, chip); - return 0; - } - - /* Read the NAND chip ID: 2. Send address byte zero */ - DoC_Address(doc, ADDR_COLUMN, 0, CDSN_CTRL_WP, 0); - - /* Read the manufacturer and device id codes from the device */ - - if (DoC_is_Millennium(doc)) { - DoC_Delay(doc, 2); - dummy = ReadDOC(doc->virtadr, ReadPipeInit); - mfr = ReadDOC(doc->virtadr, LastDataRead); - - DoC_Delay(doc, 2); - dummy = ReadDOC(doc->virtadr, ReadPipeInit); - id = ReadDOC(doc->virtadr, LastDataRead); - } else { - /* CDSN Slow IO register see Software Req 11.4 item 5. */ - dummy = ReadDOC(doc->virtadr, CDSNSlowIO); - DoC_Delay(doc, 2); - mfr = ReadDOC_(doc->virtadr, doc->ioreg); - - /* CDSN Slow IO register see Software Req 11.4 item 5. */ - dummy = ReadDOC(doc->virtadr, CDSNSlowIO); - DoC_Delay(doc, 2); - id = ReadDOC_(doc->virtadr, doc->ioreg); - } - - /* No response - return failure */ - if (mfr == 0xff || mfr == 0) - return 0; - - /* Check it's the same as the first chip we identified. - * M-Systems say that any given DiskOnChip device should only - * contain _one_ type of flash part, although that's not a - * hardware restriction. */ - if (doc->mfr) { - if (doc->mfr == mfr && doc->id == id) - return 1; /* This is the same as the first */ - else - printk(KERN_WARNING - "Flash chip at floor %d, chip %d is different:\n", - floor, chip); - } - - /* Print and store the manufacturer and ID codes. */ - for (i = 0; nand_flash_ids[i].name != NULL; i++) { - if (id == nand_flash_ids[i].dev_id) { - /* Try to identify manufacturer */ - for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { - if (nand_manuf_ids[j].id == mfr) - break; - } - printk(KERN_INFO - "Flash chip found: Manufacturer ID: %2.2X, " - "Chip ID: %2.2X (%s:%s)\n", mfr, id, - nand_manuf_ids[j].name, nand_flash_ids[i].name); - if (!doc->mfr) { - doc->mfr = mfr; - doc->id = id; - doc->chipshift = - ffs((nand_flash_ids[i].chipsize << 20)) - 1; - doc->page256 = (nand_flash_ids[i].pagesize == 256) ? 1 : 0; - doc->pageadrlen = doc->chipshift > 25 ? 3 : 2; - doc->erasesize = - nand_flash_ids[i].erasesize; - return 1; - } - return 0; - } - } - - - /* We haven't fully identified the chip. Print as much as we know. */ - printk(KERN_WARNING "Unknown flash chip found: %2.2X %2.2X\n", - id, mfr); - - printk(KERN_WARNING "Please report to dwmw2@infradead.org\n"); - return 0; -} - -/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */ - -static void DoC_ScanChips(struct DiskOnChip *this, int maxchips) -{ - int floor, chip; - int numchips[MAX_FLOORS]; - int ret = 1; - - this->numchips = 0; - this->mfr = 0; - this->id = 0; - - /* For each floor, find the number of valid chips it contains */ - for (floor = 0; floor < MAX_FLOORS; floor++) { - ret = 1; - numchips[floor] = 0; - for (chip = 0; chip < maxchips && ret != 0; chip++) { - - ret = DoC_IdentChip(this, floor, chip); - if (ret) { - numchips[floor]++; - this->numchips++; - } - } - } - - /* If there are none at all that we recognise, bail */ - if (!this->numchips) { - printk(KERN_NOTICE "No flash chips recognised.\n"); - return; - } - - /* Allocate an array to hold the information for each chip */ - this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL); - if (!this->chips) { - printk(KERN_NOTICE "No memory for allocating chip info structures\n"); - return; - } - - ret = 0; - - /* Fill out the chip array with {floor, chipno} for each - * detected chip in the device. */ - for (floor = 0; floor < MAX_FLOORS; floor++) { - for (chip = 0; chip < numchips[floor]; chip++) { - this->chips[ret].floor = floor; - this->chips[ret].chip = chip; - this->chips[ret].curadr = 0; - this->chips[ret].curmode = 0x50; - ret++; - } - } - - /* Calculate and print the total size of the device */ - this->totlen = this->numchips * (1 << this->chipshift); - - printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n", - this->numchips, this->totlen >> 20); -} - -static int DoC2k_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2) -{ - int tmp1, tmp2, retval; - if (doc1->physadr == doc2->physadr) - return 1; - - /* Use the alias resolution register which was set aside for this - * purpose. If it's value is the same on both chips, they might - * be the same chip, and we write to one and check for a change in - * the other. It's unclear if this register is usuable in the - * DoC 2000 (it's in the Millennium docs), but it seems to work. */ - tmp1 = ReadDOC(doc1->virtadr, AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, AliasResolution); - if (tmp1 != tmp2) - return 0; - - WriteDOC((tmp1 + 1) % 0xff, doc1->virtadr, AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, AliasResolution); - if (tmp2 == (tmp1 + 1) % 0xff) - retval = 1; - else - retval = 0; - - /* Restore register contents. May not be necessary, but do it just to - * be safe. */ - WriteDOC(tmp1, doc1->virtadr, AliasResolution); - - return retval; -} - -/* This routine is found from the docprobe code by symbol_get(), - * which will bump the use count of this module. */ -void DoC2k_init(struct mtd_info *mtd) -{ - struct DiskOnChip *this = mtd->priv; - struct DiskOnChip *old = NULL; - int maxchips; - - /* We must avoid being called twice for the same device. */ - - if (doc2klist) - old = doc2klist->priv; - - while (old) { - if (DoC2k_is_alias(old, this)) { - printk(KERN_NOTICE - "Ignoring DiskOnChip 2000 at 0x%lX - already configured\n", - this->physadr); - iounmap(this->virtadr); - kfree(mtd); - return; - } - if (old->nextdoc) - old = old->nextdoc->priv; - else - old = NULL; - } - - - switch (this->ChipID) { - case DOC_ChipID_Doc2kTSOP: - mtd->name = "DiskOnChip 2000 TSOP"; - this->ioreg = DoC_Mil_CDSN_IO; - /* Pretend it's a Millennium */ - this->ChipID = DOC_ChipID_DocMil; - maxchips = MAX_CHIPS; - break; - case DOC_ChipID_Doc2k: - mtd->name = "DiskOnChip 2000"; - this->ioreg = DoC_2k_CDSN_IO; - maxchips = MAX_CHIPS; - break; - case DOC_ChipID_DocMil: - mtd->name = "DiskOnChip Millennium"; - this->ioreg = DoC_Mil_CDSN_IO; - maxchips = MAX_CHIPS_MIL; - break; - default: - printk("Unknown ChipID 0x%02x\n", this->ChipID); - kfree(mtd); - iounmap(this->virtadr); - return; - } - - printk(KERN_NOTICE "%s found at address 0x%lX\n", mtd->name, - this->physadr); - - mtd->type = MTD_NANDFLASH; - mtd->flags = MTD_CAP_NANDFLASH; - mtd->writebufsize = mtd->writesize = 512; - mtd->oobsize = 16; - mtd->ecc_strength = 2; - mtd->owner = THIS_MODULE; - mtd->_erase = doc_erase; - mtd->_read = doc_read; - mtd->_write = doc_write; - mtd->_read_oob = doc_read_oob; - mtd->_write_oob = doc_write_oob; - this->curfloor = -1; - this->curchip = -1; - mutex_init(&this->lock); - - /* Ident all the chips present. */ - DoC_ScanChips(this, maxchips); - - if (!this->totlen) { - kfree(mtd); - iounmap(this->virtadr); - } else { - this->nextdoc = doc2klist; - doc2klist = mtd; - mtd->size = this->totlen; - mtd->erasesize = this->erasesize; - mtd_device_register(mtd, NULL, 0); - return; - } -} -EXPORT_SYMBOL_GPL(DoC2k_init); - -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf) -{ - struct DiskOnChip *this = mtd->priv; - void __iomem *docptr = this->virtadr; - struct Nand *mychip; - unsigned char syndrome[6], eccbuf[6]; - volatile char dummy; - int i, len256 = 0, ret=0; - size_t left = len; - - mutex_lock(&this->lock); - while (left) { - len = left; - - /* Don't allow a single read to cross a 512-byte block boundary */ - if (from + len > ((from | 0x1ff) + 1)) - len = ((from | 0x1ff) + 1) - from; - - /* The ECC will not be calculated correctly if less than 512 is read */ - if (len != 0x200) - printk(KERN_WARNING - "ECC needs a full sector read (adr: %lx size %lx)\n", - (long) from, (long) len); - - /* printk("DoC_Read (adr: %lx size %lx)\n", (long) from, (long) len); */ - - - /* Find the chip which is to be used and select it */ - mychip = &this->chips[from >> (this->chipshift)]; - - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(this, mychip->floor); - DoC_SelectChip(this, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(this, mychip->chip); - } - - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - DoC_Command(this, - (!this->page256 - && (from & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0, - CDSN_CTRL_WP); - DoC_Address(this, ADDR_COLUMN_PAGE, from, CDSN_CTRL_WP, - CDSN_CTRL_ECC_IO); - - /* Prime the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, ECCConf); - WriteDOC(DOC_ECC_EN, docptr, ECCConf); - - /* treat crossing 256-byte sector for 2M x 8bits devices */ - if (this->page256 && from + len > (from | 0xff) + 1) { - len256 = (from | 0xff) + 1 - from; - DoC_ReadBuf(this, buf, len256); - - DoC_Command(this, NAND_CMD_READ0, CDSN_CTRL_WP); - DoC_Address(this, ADDR_COLUMN_PAGE, from + len256, - CDSN_CTRL_WP, CDSN_CTRL_ECC_IO); - } - - DoC_ReadBuf(this, &buf[len256], len - len256); - - /* Let the caller know we completed it */ - *retlen += len; - - /* Read the ECC data through the DiskOnChip ECC logic */ - /* Note: this will work even with 2M x 8bit devices as */ - /* they have 8 bytes of OOB per 256 page. mf. */ - DoC_ReadBuf(this, eccbuf, 6); - - /* Flush the pipeline */ - if (DoC_is_Millennium(this)) { - dummy = ReadDOC(docptr, ECCConf); - dummy = ReadDOC(docptr, ECCConf); - i = ReadDOC(docptr, ECCConf); - } else { - dummy = ReadDOC(docptr, 2k_ECCStatus); - dummy = ReadDOC(docptr, 2k_ECCStatus); - i = ReadDOC(docptr, 2k_ECCStatus); - } - - /* Check the ECC Status */ - if (i & 0x80) { - int nb_errors; - /* There was an ECC error */ -#ifdef ECC_DEBUG - printk(KERN_ERR "DiskOnChip ECC Error: Read at %lx\n", (long)from); -#endif - /* Read the ECC syndrome through the DiskOnChip ECC - logic. These syndrome will be all ZERO when there - is no error */ - for (i = 0; i < 6; i++) { - syndrome[i] = - ReadDOC(docptr, ECCSyndrome0 + i); - } - nb_errors = doc_decode_ecc(buf, syndrome); - -#ifdef ECC_DEBUG - printk(KERN_ERR "Errors corrected: %x\n", nb_errors); -#endif - if (nb_errors < 0) { - /* We return error, but have actually done the - read. Not that this can be told to - user-space, via sys_read(), but at least - MTD-aware stuff can know about it by - checking *retlen */ - ret = -EIO; - } - } - -#ifdef PSYCHO_DEBUG - printk(KERN_DEBUG "ECC DATA at %lxB: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long)from, eccbuf[0], eccbuf[1], eccbuf[2], - eccbuf[3], eccbuf[4], eccbuf[5]); -#endif - - /* disable the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr , ECCConf); - - /* according to 11.4.1, we need to wait for the busy line - * drop if we read to the end of the page. */ - if(0 == ((from + len) & 0x1ff)) - { - DoC_WaitReady(this); - } - - from += len; - left -= len; - buf += len; - } - - mutex_unlock(&this->lock); - - return ret; -} - -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t * retlen, const u_char * buf) -{ - struct DiskOnChip *this = mtd->priv; - int di; /* Yes, DI is a hangover from when I was disassembling the binary driver */ - void __iomem *docptr = this->virtadr; - unsigned char eccbuf[6]; - volatile char dummy; - int len256 = 0; - struct Nand *mychip; - size_t left = len; - int status; - - mutex_lock(&this->lock); - while (left) { - len = left; - - /* Don't allow a single write to cross a 512-byte block boundary */ - if (to + len > ((to | 0x1ff) + 1)) - len = ((to | 0x1ff) + 1) - to; - - /* The ECC will not be calculated correctly if less than 512 is written */ -/* DBB- - if (len != 0x200 && eccbuf) - printk(KERN_WARNING - "ECC needs a full sector write (adr: %lx size %lx)\n", - (long) to, (long) len); - -DBB */ - - /* printk("DoC_Write (adr: %lx size %lx)\n", (long) to, (long) len); */ - - /* Find the chip which is to be used and select it */ - mychip = &this->chips[to >> (this->chipshift)]; - - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(this, mychip->floor); - DoC_SelectChip(this, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(this, mychip->chip); - } - - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Set device to main plane of flash */ - DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP); - DoC_Command(this, - (!this->page256 - && (to & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0, - CDSN_CTRL_WP); - - DoC_Command(this, NAND_CMD_SEQIN, 0); - DoC_Address(this, ADDR_COLUMN_PAGE, to, 0, CDSN_CTRL_ECC_IO); - - /* Prime the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, ECCConf); - WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf); - - /* treat crossing 256-byte sector for 2M x 8bits devices */ - if (this->page256 && to + len > (to | 0xff) + 1) { - len256 = (to | 0xff) + 1 - to; - DoC_WriteBuf(this, buf, len256); - - DoC_Command(this, NAND_CMD_PAGEPROG, 0); - - DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP); - /* There's an implicit DoC_WaitReady() in DoC_Command */ - - dummy = ReadDOC(docptr, CDSNSlowIO); - DoC_Delay(this, 2); - - if (ReadDOC_(docptr, this->ioreg) & 1) { - printk(KERN_ERR "Error programming flash\n"); - /* Error in programming */ - *retlen = 0; - mutex_unlock(&this->lock); - return -EIO; - } - - DoC_Command(this, NAND_CMD_SEQIN, 0); - DoC_Address(this, ADDR_COLUMN_PAGE, to + len256, 0, - CDSN_CTRL_ECC_IO); - } - - DoC_WriteBuf(this, &buf[len256], len - len256); - - WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_CE, docptr, CDSNControl); - - if (DoC_is_Millennium(this)) { - WriteDOC(0, docptr, NOP); - WriteDOC(0, docptr, NOP); - WriteDOC(0, docptr, NOP); - } else { - WriteDOC_(0, docptr, this->ioreg); - WriteDOC_(0, docptr, this->ioreg); - WriteDOC_(0, docptr, this->ioreg); - } - - WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_FLASH_IO | CDSN_CTRL_CE, docptr, - CDSNControl); - - /* Read the ECC data through the DiskOnChip ECC logic */ - for (di = 0; di < 6; di++) { - eccbuf[di] = ReadDOC(docptr, ECCSyndrome0 + di); - } - - /* Reset the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr, ECCConf); - -#ifdef PSYCHO_DEBUG - printk - ("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], - eccbuf[4], eccbuf[5]); -#endif - DoC_Command(this, NAND_CMD_PAGEPROG, 0); - - DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP); - /* There's an implicit DoC_WaitReady() in DoC_Command */ - - if (DoC_is_Millennium(this)) { - ReadDOC(docptr, ReadPipeInit); - status = ReadDOC(docptr, LastDataRead); - } else { - dummy = ReadDOC(docptr, CDSNSlowIO); - DoC_Delay(this, 2); - status = ReadDOC_(docptr, this->ioreg); - } - - if (status & 1) { - printk(KERN_ERR "Error programming flash\n"); - /* Error in programming */ - *retlen = 0; - mutex_unlock(&this->lock); - return -EIO; - } - - /* Let the caller know we completed it */ - *retlen += len; - - { - unsigned char x[8]; - size_t dummy; - int ret; - - /* Write the ECC data to flash */ - for (di=0; di<6; di++) - x[di] = eccbuf[di]; - - x[6]=0x55; - x[7]=0x55; - - ret = doc_write_oob_nolock(mtd, to, 8, &dummy, x); - if (ret) { - mutex_unlock(&this->lock); - return ret; - } - } - - to += len; - left -= len; - buf += len; - } - - mutex_unlock(&this->lock); - return 0; -} - -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ - struct DiskOnChip *this = mtd->priv; - int len256 = 0, ret; - struct Nand *mychip; - uint8_t *buf = ops->oobbuf; - size_t len = ops->len; - - BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); - - ofs += ops->ooboffs; - - mutex_lock(&this->lock); - - mychip = &this->chips[ofs >> this->chipshift]; - - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(this, mychip->floor); - DoC_SelectChip(this, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(this, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* update address for 2M x 8bit devices. OOB starts on the second */ - /* page to maintain compatibility with doc_read_ecc. */ - if (this->page256) { - if (!(ofs & 0x8)) - ofs += 0x100; - else - ofs -= 0x8; - } - - DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP); - DoC_Address(this, ADDR_COLUMN_PAGE, ofs, CDSN_CTRL_WP, 0); - - /* treat crossing 8-byte OOB data for 2M x 8bit devices */ - /* Note: datasheet says it should automaticaly wrap to the */ - /* next OOB block, but it didn't work here. mf. */ - if (this->page256 && ofs + len > (ofs | 0x7) + 1) { - len256 = (ofs | 0x7) + 1 - ofs; - DoC_ReadBuf(this, buf, len256); - - DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP); - DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff), - CDSN_CTRL_WP, 0); - } - - DoC_ReadBuf(this, &buf[len256], len - len256); - - ops->retlen = len; - /* Reading the full OOB data drops us off of the end of the page, - * causing the flash device to go into busy mode, so we need - * to wait until ready 11.4.1 and Toshiba TC58256FT docs */ - - ret = DoC_WaitReady(this); - - mutex_unlock(&this->lock); - return ret; - -} - -static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t * retlen, const u_char * buf) -{ - struct DiskOnChip *this = mtd->priv; - int len256 = 0; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - volatile int dummy; - int status; - - // printk("doc_write_oob(%lx, %d): %2.2X %2.2X %2.2X %2.2X ... %2.2X %2.2X .. %2.2X %2.2X\n",(long)ofs, len, - // buf[0], buf[1], buf[2], buf[3], buf[8], buf[9], buf[14],buf[15]); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(this, mychip->floor); - DoC_SelectChip(this, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(this, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* disable the ECC engine */ - WriteDOC (DOC_ECC_RESET, docptr, ECCConf); - WriteDOC (DOC_ECC_DIS, docptr, ECCConf); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP); - - /* issue the Read2 command to set the pointer to the Spare Data Area. */ - DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP); - - /* update address for 2M x 8bit devices. OOB starts on the second */ - /* page to maintain compatibility with doc_read_ecc. */ - if (this->page256) { - if (!(ofs & 0x8)) - ofs += 0x100; - else - ofs -= 0x8; - } - - /* issue the Serial Data In command to initial the Page Program process */ - DoC_Command(this, NAND_CMD_SEQIN, 0); - DoC_Address(this, ADDR_COLUMN_PAGE, ofs, 0, 0); - - /* treat crossing 8-byte OOB data for 2M x 8bit devices */ - /* Note: datasheet says it should automaticaly wrap to the */ - /* next OOB block, but it didn't work here. mf. */ - if (this->page256 && ofs + len > (ofs | 0x7) + 1) { - len256 = (ofs | 0x7) + 1 - ofs; - DoC_WriteBuf(this, buf, len256); - - DoC_Command(this, NAND_CMD_PAGEPROG, 0); - DoC_Command(this, NAND_CMD_STATUS, 0); - /* DoC_WaitReady() is implicit in DoC_Command */ - - if (DoC_is_Millennium(this)) { - ReadDOC(docptr, ReadPipeInit); - status = ReadDOC(docptr, LastDataRead); - } else { - dummy = ReadDOC(docptr, CDSNSlowIO); - DoC_Delay(this, 2); - status = ReadDOC_(docptr, this->ioreg); - } - - if (status & 1) { - printk(KERN_ERR "Error programming oob data\n"); - /* There was an error */ - *retlen = 0; - return -EIO; - } - DoC_Command(this, NAND_CMD_SEQIN, 0); - DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff), 0, 0); - } - - DoC_WriteBuf(this, &buf[len256], len - len256); - - DoC_Command(this, NAND_CMD_PAGEPROG, 0); - DoC_Command(this, NAND_CMD_STATUS, 0); - /* DoC_WaitReady() is implicit in DoC_Command */ - - if (DoC_is_Millennium(this)) { - ReadDOC(docptr, ReadPipeInit); - status = ReadDOC(docptr, LastDataRead); - } else { - dummy = ReadDOC(docptr, CDSNSlowIO); - DoC_Delay(this, 2); - status = ReadDOC_(docptr, this->ioreg); - } - - if (status & 1) { - printk(KERN_ERR "Error programming oob data\n"); - /* There was an error */ - *retlen = 0; - return -EIO; - } - - *retlen = len; - return 0; - -} - -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ - struct DiskOnChip *this = mtd->priv; - int ret; - - BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); - - mutex_lock(&this->lock); - ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len, - &ops->retlen, ops->oobbuf); - - mutex_unlock(&this->lock); - return ret; -} - -static int doc_erase(struct mtd_info *mtd, struct erase_info *instr) -{ - struct DiskOnChip *this = mtd->priv; - __u32 ofs = instr->addr; - __u32 len = instr->len; - volatile int dummy; - void __iomem *docptr = this->virtadr; - struct Nand *mychip; - int status; - - mutex_lock(&this->lock); - - if (ofs & (mtd->erasesize-1) || len & (mtd->erasesize-1)) { - mutex_unlock(&this->lock); - return -EINVAL; - } - - instr->state = MTD_ERASING; - - /* FIXME: Do this in the background. Use timers or schedule_task() */ - while(len) { - mychip = &this->chips[ofs >> this->chipshift]; - - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(this, mychip->floor); - DoC_SelectChip(this, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(this, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - DoC_Command(this, NAND_CMD_ERASE1, 0); - DoC_Address(this, ADDR_PAGE, ofs, 0, 0); - DoC_Command(this, NAND_CMD_ERASE2, 0); - - DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP); - - if (DoC_is_Millennium(this)) { - ReadDOC(docptr, ReadPipeInit); - status = ReadDOC(docptr, LastDataRead); - } else { - dummy = ReadDOC(docptr, CDSNSlowIO); - DoC_Delay(this, 2); - status = ReadDOC_(docptr, this->ioreg); - } - - if (status & 1) { - printk(KERN_ERR "Error erasing at 0x%x\n", ofs); - /* There was an error */ - instr->state = MTD_ERASE_FAILED; - goto callback; - } - ofs += mtd->erasesize; - len -= mtd->erasesize; - } - instr->state = MTD_ERASE_DONE; - - callback: - mtd_erase_callback(instr); - - mutex_unlock(&this->lock); - return 0; -} - - -/**************************************************************************** - * - * Module stuff - * - ****************************************************************************/ - -static void __exit cleanup_doc2000(void) -{ - struct mtd_info *mtd; - struct DiskOnChip *this; - - while ((mtd = doc2klist)) { - this = mtd->priv; - doc2klist = this->nextdoc; - - mtd_device_unregister(mtd); - - iounmap(this->virtadr); - kfree(this->chips); - kfree(mtd); - } -} - -module_exit(cleanup_doc2000); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al."); -MODULE_DESCRIPTION("MTD driver for DiskOnChip 2000 and Millennium"); - |