summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/denali.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/denali.c')
-rw-r--r--drivers/mtd/nand/denali.c101
1 files changed, 21 insertions, 80 deletions
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 0476ae8776d9..73b9d4e2dca0 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -21,7 +21,6 @@
#include <linux/dma-mapping.h>
#include <linux/wait.h>
#include <linux/mutex.h>
-#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/module.h>
@@ -182,9 +181,6 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
{
int i;
- dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
for (i = 0; i < denali->max_banks; i++)
iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
denali->flash_reg + INTR_STATUS(i));
@@ -234,9 +230,6 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
uint16_t acc_clks;
uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
- dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
en_lo = CEIL_DIV(Trp[mode], CLK_X);
en_hi = CEIL_DIV(Treh[mode], CLK_X);
#if ONFI_BLOOM_TIME
@@ -403,7 +396,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
break;
default:
dev_warn(denali->dev,
- "Spectra: Unknown Hynix NAND (Device ID: 0x%x).\n"
+ "Unknown Hynix NAND (Device ID: 0x%x).\n"
"Will use default parameter values instead.\n",
device_id);
}
@@ -474,33 +467,6 @@ static void detect_max_banks(struct denali_nand_info *denali)
denali->max_banks = 1 << (features & FEATURES__N_BANKS);
}
-static void detect_partition_feature(struct denali_nand_info *denali)
-{
- /*
- * For MRST platform, denali->fwblks represent the
- * number of blocks firmware is taken,
- * FW is in protect partition and MTD driver has no
- * permission to access it. So let driver know how many
- * blocks it can't touch.
- */
- if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
- if ((ioread32(denali->flash_reg + PERM_SRC_ID(1)) &
- PERM_SRC_ID__SRCID) == SPECTRA_PARTITION_ID) {
- denali->fwblks =
- ((ioread32(denali->flash_reg + MIN_MAX_BANK(1)) &
- MIN_MAX_BANK__MIN_VALUE) *
- denali->blksperchip)
- +
- (ioread32(denali->flash_reg + MIN_BLK_ADDR(1)) &
- MIN_BLK_ADDR__VALUE);
- } else {
- denali->fwblks = SPECTRA_START_BLOCK;
- }
- } else {
- denali->fwblks = SPECTRA_START_BLOCK;
- }
-}
-
static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
{
uint16_t status = PASS;
@@ -508,9 +474,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
uint8_t maf_id, device_id;
int i;
- dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
/*
* Use read id method to get device ID and other params.
* For some NAND chips, controller can't report the correct
@@ -552,8 +515,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
find_valid_banks(denali);
- detect_partition_feature(denali);
-
/*
* If the user specified to override the default timings
* with a specific ONFI mode, we apply those changes here.
@@ -567,9 +528,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
static void denali_set_intr_modes(struct denali_nand_info *denali,
uint16_t INT_ENABLE)
{
- dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
- __FILE__, __LINE__, __func__);
-
if (INT_ENABLE)
iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
else
@@ -605,7 +563,6 @@ static void denali_irq_init(struct denali_nand_info *denali)
static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
{
denali_set_intr_modes(denali, false);
- free_irq(irqnum, denali);
}
static void denali_irq_enable(struct denali_nand_info *denali,
@@ -1437,9 +1394,6 @@ static struct nand_bbt_descr bbt_mirror_descr = {
/* initialize driver data structures */
static void denali_drv_init(struct denali_nand_info *denali)
{
- denali->idx = 0;
-
- /* setup interrupt handler */
/*
* the completion object will be used to notify
* the callee that the interrupt is done
@@ -1485,14 +1439,12 @@ int denali_init(struct denali_nand_info *denali)
denali_hw_init(denali);
denali_drv_init(denali);
- /*
- * denali_isr register is done after all the hardware
- * initilization is finished
- */
- if (request_irq(denali->irq, denali_isr, IRQF_SHARED,
- DENALI_NAND_NAME, denali)) {
- pr_err("Spectra: Unable to allocate IRQ\n");
- return -ENODEV;
+ /* Request IRQ after all the hardware initialization is finished */
+ ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
+ IRQF_SHARED, DENALI_NAND_NAME, denali);
+ if (ret) {
+ dev_err(denali->dev, "Unable to request IRQ\n");
+ return ret;
}
/* now that our ISR is registered, we can enable interrupts */
@@ -1510,10 +1462,9 @@ int denali_init(struct denali_nand_info *denali)
* this is the first stage in a two step process to register
* with the nand subsystem
*/
- if (nand_scan_ident(mtd, denali->max_banks, NULL)) {
- ret = -ENXIO;
+ ret = nand_scan_ident(mtd, denali->max_banks, NULL);
+ if (ret)
goto failed_req_irq;
- }
/* allocate the right size buffer now */
devm_kfree(denali->dev, denali->buf.buf);
@@ -1528,7 +1479,7 @@ int denali_init(struct denali_nand_info *denali)
/* Is 32-bit DMA supported? */
ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32));
if (ret) {
- pr_err("Spectra: no usable DMA configuration\n");
+ dev_err(denali->dev, "No usable DMA configuration\n");
goto failed_req_irq;
}
@@ -1536,7 +1487,7 @@ int denali_init(struct denali_nand_info *denali)
mtd->writesize + mtd->oobsize,
DMA_BIDIRECTIONAL);
if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
- dev_err(denali->dev, "Spectra: failed to map DMA buffer\n");
+ dev_err(denali->dev, "Failed to map DMA buffer\n");
ret = -EIO;
goto failed_req_irq;
}
@@ -1547,16 +1498,16 @@ int denali_init(struct denali_nand_info *denali)
* the real pagesize and anything necessery
*/
denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
- denali->nand.chipsize <<= (denali->devnum - 1);
- denali->nand.page_shift += (denali->devnum - 1);
+ denali->nand.chipsize <<= denali->devnum - 1;
+ denali->nand.page_shift += denali->devnum - 1;
denali->nand.pagemask = (denali->nand.chipsize >>
denali->nand.page_shift) - 1;
- denali->nand.bbt_erase_shift += (denali->devnum - 1);
+ denali->nand.bbt_erase_shift += denali->devnum - 1;
denali->nand.phys_erase_shift = denali->nand.bbt_erase_shift;
- denali->nand.chip_shift += (denali->devnum - 1);
- mtd->writesize <<= (denali->devnum - 1);
- mtd->oobsize <<= (denali->devnum - 1);
- mtd->erasesize <<= (denali->devnum - 1);
+ denali->nand.chip_shift += denali->devnum - 1;
+ mtd->writesize <<= denali->devnum - 1;
+ mtd->oobsize <<= denali->devnum - 1;
+ mtd->erasesize <<= denali->devnum - 1;
mtd->size = denali->nand.numchips * denali->nand.chipsize;
denali->bbtskipbytes *= denali->devnum;
@@ -1606,14 +1557,6 @@ int denali_init(struct denali_nand_info *denali)
denali->nand.ecc.bytes *= denali->devnum;
denali->nand.ecc.strength *= denali->devnum;
- /*
- * Let driver know the total blocks number and how many blocks
- * contained by each nand chip. blksperchip will help driver to
- * know how many blocks is taken by FW.
- */
- denali->totalblks = mtd->size >> denali->nand.phys_erase_shift;
- denali->blksperchip = denali->totalblks / denali->nand.numchips;
-
/* override the default read operations */
denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum;
denali->nand.ecc.read_page = denali_read_page;
@@ -1624,15 +1567,13 @@ int denali_init(struct denali_nand_info *denali)
denali->nand.ecc.write_oob = denali_write_oob;
denali->nand.erase = denali_erase;
- if (nand_scan_tail(mtd)) {
- ret = -ENXIO;
+ ret = nand_scan_tail(mtd);
+ if (ret)
goto failed_req_irq;
- }
ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
- dev_err(denali->dev, "Spectra: Failed to register MTD: %d\n",
- ret);
+ dev_err(denali->dev, "Failed to register MTD: %d\n", ret);
goto failed_req_irq;
}
return 0;
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-08 13:08:44 +0100