summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/gpmi-nand/gpmi-lib.c')
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c13
1 files changed, 13 insertions, 0 deletions
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 4f8857fa48a7..aaced29727fb 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -187,6 +187,12 @@ int gpmi_init(struct gpmi_nand_data *this)
/* Select BCH ECC. */
writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+ /*
+ * Decouple the chip select from dma channel. We use dma0 for all
+ * the chips.
+ */
+ writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
gpmi_disable_clk(this);
return 0;
err_out:
@@ -1073,6 +1079,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) {
+ /*
+ * In the imx6, all the ready/busy pins are bound
+ * together. So we only need to check chip 0.
+ */
+ if (GPMI_IS_MX6Q(this))
+ chip = 0;
+
/* MX28 shares the same R/B register as MX6Q. */
mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
reg = readl(r->gpmi_regs + HW_GPMI_STAT);