1 files changed, 30 insertions, 11 deletions

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index df7eb4ff07d1..c2e1232cd45c 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -386,7 +386,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	uint8_t buf[2] = { 0, 0 };
 	int ret = 0, res, i = 0;
 
-	ops.datbuf = NULL;
+	memset(&ops, 0, sizeof(ops));
 	ops.oobbuf = buf;
 	ops.ooboffs = chip->badblockpos;
 	if (chip->options & NAND_BUSWIDTH_16) {
@@ -566,6 +566,25 @@ void nand_wait_ready(struct mtd_info *mtd)
 EXPORT_SYMBOL_GPL(nand_wait_ready);
 
 /**
+ * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout in ms
+ *
+ * Wait for status ready (i.e. command done) or timeout.
+ */
+static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+	register struct nand_chip *chip = mtd->priv;
+
+	timeo = jiffies + msecs_to_jiffies(timeo);
+	do {
+		if ((chip->read_byte(mtd) & NAND_STATUS_READY))
+			break;
+		touch_softlockup_watchdog();
+	} while (time_before(jiffies, timeo));
+};
+
+/**
  * nand_command - [DEFAULT] Send command to NAND device
  * @mtd: MTD device structure
  * @command: the command to be sent
@@ -643,8 +662,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 			       NAND_CTRL_CLE | NAND_CTRL_CHANGE);
 		chip->cmd_ctrl(mtd,
 			       NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
-		while (!(chip->read_byte(mtd) & NAND_STATUS_READY))
-				;
+		/* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+		nand_wait_status_ready(mtd, 250);
 		return;
 
 		/* This applies to read commands */
@@ -740,8 +759,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 			       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
 		chip->cmd_ctrl(mtd, NAND_CMD_NONE,
 			       NAND_NCE | NAND_CTRL_CHANGE);
-		while (!(chip->read_byte(mtd) & NAND_STATUS_READY))
-				;
+		/* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+		nand_wait_status_ready(mtd, 250);
 		return;
 
 	case NAND_CMD_RNDOUT:
@@ -968,7 +987,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 			__func__, (unsigned long long)ofs, len);
 
 	if (check_offs_len(mtd, ofs, len))
-		ret = -EINVAL;
+		return -EINVAL;
 
 	/* Align to last block address if size addresses end of the device */
 	if (ofs + len == mtd->size)
@@ -1031,7 +1050,7 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 			__func__, (unsigned long long)ofs, len);
 
 	if (check_offs_len(mtd, ofs, len))
-		ret = -EINVAL;
+		return -EINVAL;
 
 	nand_get_device(mtd, FL_LOCKING);
 
@@ -1716,9 +1735,9 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int ret;
 
 	nand_get_device(mtd, FL_READING);
+	memset(&ops, 0, sizeof(ops));
 	ops.len = len;
 	ops.datbuf = buf;
-	ops.oobbuf = NULL;
 	ops.mode = MTD_OPS_PLACE_OOB;
 	ret = nand_do_read_ops(mtd, from, &ops);
 	*retlen = ops.retlen;
@@ -2124,7 +2143,7 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 
 
 /**
- * nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write
+ * nand_write_subpage_hwecc - [REPLACEABLE] hardware ECC based subpage write
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
  * @offset:	column address of subpage within the page
@@ -2508,9 +2527,9 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 	/* Grab the device */
 	panic_nand_get_device(chip, mtd, FL_WRITING);
 
+	memset(&ops, 0, sizeof(ops));
 	ops.len = len;
 	ops.datbuf = (uint8_t *)buf;
-	ops.oobbuf = NULL;
 	ops.mode = MTD_OPS_PLACE_OOB;
 
 	ret = nand_do_write_ops(mtd, to, &ops);
@@ -2536,9 +2555,9 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 	int ret;
 
 	nand_get_device(mtd, FL_WRITING);
+	memset(&ops, 0, sizeof(ops));
 	ops.len = len;
 	ops.datbuf = (uint8_t *)buf;
-	ops.oobbuf = NULL;
 	ops.mode = MTD_OPS_PLACE_OOB;
 	ret = nand_do_write_ops(mtd, to, &ops);
 	*retlen = ops.retlen;