diff options
Diffstat (limited to 'drivers/mtd/nand/pxa3xx_nand.c')
| -rw-r--r-- | drivers/mtd/nand/pxa3xx_nand.c | 70 |
1 files changed, 43 insertions, 27 deletions
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 5db900d917f9..4cabdc9fda90 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -39,6 +39,13 @@ #define NAND_STOP_DELAY (2 * HZ/50) #define PAGE_CHUNK_SIZE (2048) +/* + * Define a buffer size for the initial command that detects the flash device: + * STATUS, READID and PARAM. The largest of these is the PARAM command, + * needing 256 bytes. + */ +#define INIT_BUFFER_SIZE 256 + /* registers and bit definitions */ #define NDCR (0x00) /* Control register */ #define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */ @@ -164,6 +171,7 @@ struct pxa3xx_nand_info { unsigned int buf_start; unsigned int buf_count; + unsigned int buf_size; /* DMA information */ int drcmr_dat; @@ -540,7 +548,6 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, info->oob_size = 0; info->use_ecc = 0; info->use_spare = 1; - info->use_dma = (use_dma) ? 1 : 0; info->is_ready = 0; info->retcode = ERR_NONE; if (info->cs != 0) @@ -912,26 +919,20 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info) return 0; } -/* the maximum possible buffer size for large page with OOB data - * is: 2048 + 64 = 2112 bytes, allocate a page here for both the - * data buffer and the DMA descriptor - */ -#define MAX_BUFF_SIZE PAGE_SIZE - #ifdef ARCH_HAS_DMA static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) { struct platform_device *pdev = info->pdev; - int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc); + int data_desc_offset = info->buf_size - sizeof(struct pxa_dma_desc); if (use_dma == 0) { - info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL); + info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); if (info->data_buff == NULL) return -ENOMEM; return 0; } - info->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE, + info->data_buff = dma_alloc_coherent(&pdev->dev, info->buf_size, &info->data_buff_phys, GFP_KERNEL); if (info->data_buff == NULL) { dev_err(&pdev->dev, "failed to allocate dma buffer\n"); @@ -945,11 +946,16 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) pxa3xx_nand_data_dma_irq, info); if (info->data_dma_ch < 0) { dev_err(&pdev->dev, "failed to request data dma\n"); - dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, + dma_free_coherent(&pdev->dev, info->buf_size, info->data_buff, info->data_buff_phys); return info->data_dma_ch; } + /* + * Now that DMA buffers are allocated we turn on + * DMA proper for I/O operations. + */ + info->use_dma = 1; return 0; } @@ -958,7 +964,7 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) struct platform_device *pdev = info->pdev; if (use_dma) { pxa_free_dma(info->data_dma_ch); - dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, + dma_free_coherent(&pdev->dev, info->buf_size, info->data_buff, info->data_buff_phys); } else { kfree(info->data_buff); @@ -967,7 +973,7 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) #else static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) { - info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL); + info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); if (info->data_buff == NULL) return -ENOMEM; return 0; @@ -1081,7 +1087,16 @@ KEEP_CONFIG: else host->col_addr_cycles = 1; + /* release the initial buffer */ + kfree(info->data_buff); + + /* allocate the real data + oob buffer */ + info->buf_size = mtd->writesize + mtd->oobsize; + ret = pxa3xx_nand_init_buff(info); + if (ret) + return ret; info->oob_buff = info->data_buff + mtd->writesize; + if ((mtd->size >> chip->page_shift) > 65536) host->row_addr_cycles = 3; else @@ -1187,15 +1202,18 @@ static int alloc_nand_resource(struct platform_device *pdev) } info->mmio_phys = r->start; - ret = pxa3xx_nand_init_buff(info); - if (ret) + /* Allocate a buffer to allow flash detection */ + info->buf_size = INIT_BUFFER_SIZE; + info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); + if (info->data_buff == NULL) { + ret = -ENOMEM; goto fail_disable_clk; + } /* initialize all interrupts to be disabled */ disable_int(info, NDSR_MASK); - ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED, - pdev->name, info); + ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info); if (ret < 0) { dev_err(&pdev->dev, "failed to request IRQ\n"); goto fail_free_buf; @@ -1207,7 +1225,7 @@ static int alloc_nand_resource(struct platform_device *pdev) fail_free_buf: free_irq(irq, info); - pxa3xx_nand_free_buff(info); + kfree(info->data_buff); fail_disable_clk: clk_disable_unprepare(info->clk); return ret; @@ -1236,7 +1254,6 @@ static int pxa3xx_nand_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF static struct of_device_id pxa3xx_nand_dt_ids[] = { { .compatible = "marvell,pxa3xx-nand", @@ -1284,12 +1301,6 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) return 0; } -#else -static inline int pxa3xx_nand_probe_dt(struct platform_device *pdev) -{ - return 0; -} -#endif static int pxa3xx_nand_probe(struct platform_device *pdev) { @@ -1327,7 +1338,12 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) for (cs = 0; cs < pdata->num_cs; cs++) { struct mtd_info *mtd = info->host[cs]->mtd; - mtd->name = pdev->name; + /* + * The mtd name matches the one used in 'mtdparts' kernel + * parameter. This name cannot be changed or otherwise + * user's mtd partitions configuration would get broken. + */ + mtd->name = "pxa3xx_nand-0"; info->cs = cs; ret = pxa3xx_nand_scan(mtd); if (ret) { @@ -1414,7 +1430,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev) static struct platform_driver pxa3xx_nand_driver = { .driver = { .name = "pxa3xx-nand", - .of_match_table = of_match_ptr(pxa3xx_nand_dt_ids), + .of_match_table = pxa3xx_nand_dt_ids, }, .probe = pxa3xx_nand_probe, .remove = pxa3xx_nand_remove, |