diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/nand/raw/Kconfig | 32 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/bf5xx_nand.c | 861 |
3 files changed, 0 insertions, 894 deletions
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 2c6ecb7ae753..9b1918af0064 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -116,38 +116,6 @@ config MTD_NAND_AU1550 This enables the driver for the NAND flash controller on the AMD/Alchemy 1550 SOC. -config MTD_NAND_BF5XX - tristate "Blackfin on-chip NAND Flash Controller driver" - depends on BF54x || BF52x - help - This enables the Blackfin on-chip NAND flash controller - - No board specific support is done by this driver, each board - must advertise a platform_device for the driver to attach. - - This driver can also be built as a module. If so, the module - will be called bf5xx-nand. - -config MTD_NAND_BF5XX_HWECC - bool "BF5XX NAND Hardware ECC" - default y - depends on MTD_NAND_BF5XX - help - Enable the use of the BF5XX's internal ECC generator when - using NAND. - -config MTD_NAND_BF5XX_BOOTROM_ECC - bool "Use Blackfin BootROM ECC Layout" - default n - depends on MTD_NAND_BF5XX_HWECC - help - If you wish to modify NAND pages and allow the Blackfin on-chip - BootROM to boot from them, say Y here. This is only necessary - if you are booting U-Boot out of NAND and you wish to update - U-Boot from Linux' userspace. Otherwise, you should say N here. - - If unsure, say N. - config MTD_NAND_S3C2410 tristate "NAND Flash support for Samsung S3C SoCs" depends on ARCH_S3C24XX || ARCH_S3C64XX diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index f16f59a197a3..165b7ef9e9a1 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_MTD_NAND_DENALI) += denali.o obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o -obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o obj-$(CONFIG_MTD_NAND_TANGO) += tango_nand.o obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o diff --git a/drivers/mtd/nand/raw/bf5xx_nand.c b/drivers/mtd/nand/raw/bf5xx_nand.c deleted file mode 100644 index 9a1d8d104570..000000000000 --- a/drivers/mtd/nand/raw/bf5xx_nand.c +++ /dev/null @@ -1,861 +0,0 @@ -/* - * Copyright 2006-2008 Analog Devices Inc. - * http://blackfin.uclinux.org/ - * Bryan Wu <bryan.wu@analog.com> - * - * Blackfin BF5xx on-chip NAND flash controller driver - * - * Derived from s3c2410.c - * Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk> - * - * Derived from cafe.c - * Copyright © 2006 Red Hat, Inc. - * Copyright © 2006 David Woodhouse <dwmw2@infradead.org> - * - * Changelog: - * 12-Jun-2007 Bryan Wu: Initial version - * 18-Jul-2007 Bryan Wu: - * - ECC_HW and ECC_SW supported - * - DMA supported in ECC_HW - * - YAFFS tested as rootfs in both ECC_HW and ECC_SW - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/io.h> -#include <linux/bitops.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include <asm/blackfin.h> -#include <asm/dma.h> -#include <asm/cacheflush.h> -#include <asm/nand.h> -#include <asm/portmux.h> - -#define DRV_NAME "bf5xx-nand" -#define DRV_VERSION "1.2" -#define DRV_AUTHOR "Bryan Wu <bryan.wu@analog.com>" -#define DRV_DESC "BF5xx on-chip NAND FLash Controller Driver" - -/* NFC_STAT Masks */ -#define NBUSY 0x01 /* Not Busy */ -#define WB_FULL 0x02 /* Write Buffer Full */ -#define PG_WR_STAT 0x04 /* Page Write Pending */ -#define PG_RD_STAT 0x08 /* Page Read Pending */ -#define WB_EMPTY 0x10 /* Write Buffer Empty */ - -/* NFC_IRQSTAT Masks */ -#define NBUSYIRQ 0x01 /* Not Busy IRQ */ -#define WB_OVF 0x02 /* Write Buffer Overflow */ -#define WB_EDGE 0x04 /* Write Buffer Edge Detect */ -#define RD_RDY 0x08 /* Read Data Ready */ -#define WR_DONE 0x10 /* Page Write Done */ - -/* NFC_RST Masks */ -#define ECC_RST 0x01 /* ECC (and NFC counters) Reset */ - -/* NFC_PGCTL Masks */ -#define PG_RD_START 0x01 /* Page Read Start */ -#define PG_WR_START 0x02 /* Page Write Start */ - -#ifdef CONFIG_MTD_NAND_BF5XX_HWECC -static int hardware_ecc = 1; -#else -static int hardware_ecc; -#endif - -static const unsigned short bfin_nfc_pin_req[] = - {P_NAND_CE, - P_NAND_RB, - P_NAND_D0, - P_NAND_D1, - P_NAND_D2, - P_NAND_D3, - P_NAND_D4, - P_NAND_D5, - P_NAND_D6, - P_NAND_D7, - P_NAND_WE, - P_NAND_RE, - P_NAND_CLE, - P_NAND_ALE, - 0}; - -#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC -static int bootrom_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - if (section > 7) - return -ERANGE; - - oobregion->offset = section * 8; - oobregion->length = 3; - - return 0; -} - -static int bootrom_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - if (section > 7) - return -ERANGE; - - oobregion->offset = (section * 8) + 3; - oobregion->length = 5; - - return 0; -} - -static const struct mtd_ooblayout_ops bootrom_ooblayout_ops = { - .ecc = bootrom_ooblayout_ecc, - .free = bootrom_ooblayout_free, -}; -#endif - -/* - * Data structures for bf5xx nand flash controller driver - */ - -/* bf5xx nand info */ -struct bf5xx_nand_info { - /* mtd info */ - struct nand_hw_control controller; - struct nand_chip chip; - - /* platform info */ - struct bf5xx_nand_platform *platform; - - /* device info */ - struct device *device; - - /* DMA stuff */ - struct completion dma_completion; -}; - -/* - * Conversion functions - */ -static struct bf5xx_nand_info *mtd_to_nand_info(struct mtd_info *mtd) -{ - return container_of(mtd_to_nand(mtd), struct bf5xx_nand_info, - chip); -} - -static struct bf5xx_nand_info *to_nand_info(struct platform_device *pdev) -{ - return platform_get_drvdata(pdev); -} - -static struct bf5xx_nand_platform *to_nand_plat(struct platform_device *pdev) -{ - return dev_get_platdata(&pdev->dev); -} - -/* - * struct nand_chip interface function pointers - */ - -/* - * bf5xx_nand_hwcontrol - * - * Issue command and address cycles to the chip - */ -static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - if (cmd == NAND_CMD_NONE) - return; - - while (bfin_read_NFC_STAT() & WB_FULL) - cpu_relax(); - - if (ctrl & NAND_CLE) - bfin_write_NFC_CMD(cmd); - else if (ctrl & NAND_ALE) - bfin_write_NFC_ADDR(cmd); - SSYNC(); -} - -/* - * bf5xx_nand_devready() - * - * returns 0 if the nand is busy, 1 if it is ready - */ -static int bf5xx_nand_devready(struct mtd_info *mtd) -{ - unsigned short val = bfin_read_NFC_STAT(); - - if ((val & NBUSY) == NBUSY) - return 1; - else - return 0; -} - -/* - * ECC functions - * These allow the bf5xx to use the controller's ECC - * generator block to ECC the data as it passes through - */ - -/* - * ECC error correction function - */ -static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat, - u_char *read_ecc, u_char *calc_ecc) -{ - struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); - u32 syndrome[5]; - u32 calced, stored; - int i; - unsigned short failing_bit, failing_byte; - u_char data; - - calced = calc_ecc[0] | (calc_ecc[1] << 8) | (calc_ecc[2] << 16); - stored = read_ecc[0] | (read_ecc[1] << 8) | (read_ecc[2] << 16); - - syndrome[0] = (calced ^ stored); - - /* - * syndrome 0: all zero - * No error in data - * No action - */ - if (!syndrome[0] || !calced || !stored) - return 0; - - /* - * sysdrome 0: only one bit is one - * ECC data was incorrect - * No action - */ - if (hweight32(syndrome[0]) == 1) { - dev_err(info->device, "ECC data was incorrect!\n"); - return -EBADMSG; - } - - syndrome[1] = (calced & 0x7FF) ^ (stored & 0x7FF); - syndrome[2] = (calced & 0x7FF) ^ ((calced >> 11) & 0x7FF); - syndrome[3] = (stored & 0x7FF) ^ ((stored >> 11) & 0x7FF); - syndrome[4] = syndrome[2] ^ syndrome[3]; - - for (i = 0; i < 5; i++) - dev_info(info->device, "syndrome[%d] 0x%08x\n", i, syndrome[i]); - - dev_info(info->device, - "calced[0x%08x], stored[0x%08x]\n", - calced, stored); - - /* - * sysdrome 0: exactly 11 bits are one, each parity - * and parity' pair is 1 & 0 or 0 & 1. - * 1-bit correctable error - * Correct the error - */ - if (hweight32(syndrome[0]) == 11 && syndrome[4] == 0x7FF) { - dev_info(info->device, - "1-bit correctable error, correct it.\n"); - dev_info(info->device, - "syndrome[1] 0x%08x\n", syndrome[1]); - - failing_bit = syndrome[1] & 0x7; - failing_byte = syndrome[1] >> 0x3; - data = *(dat + failing_byte); - data = data ^ (0x1 << failing_bit); - *(dat + failing_byte) = data; - - return 1; - } - - /* - * sysdrome 0: random data - * More than 1-bit error, non-correctable error - * Discard data, mark bad block - */ - dev_err(info->device, - "More than 1-bit error, non-correctable error.\n"); - dev_err(info->device, - "Please discard data, mark bad block\n"); - - return -EBADMSG; -} - -static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat, - u_char *read_ecc, u_char *calc_ecc) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - int ret, bitflips = 0; - - ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); - if (ret < 0) - return ret; - - bitflips = ret; - - /* If ecc size is 512, correct second 256 bytes */ - if (chip->ecc.size == 512) { - dat += 256; - read_ecc += 3; - calc_ecc += 3; - ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); - if (ret < 0) - return ret; - - bitflips += ret; - } - - return bitflips; -} - -static void bf5xx_nand_enable_hwecc(struct mtd_info *mtd, int mode) -{ - return; -} - -static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd, - const u_char *dat, u_char *ecc_code) -{ - struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); - struct nand_chip *chip = mtd_to_nand(mtd); - u16 ecc0, ecc1; - u32 code[2]; - u8 *p; - - /* first 3 bytes ECC code for 256 page size */ - ecc0 = bfin_read_NFC_ECC0(); - ecc1 = bfin_read_NFC_ECC1(); - - code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); - - dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]); - - p = (u8 *) code; - memcpy(ecc_code, p, 3); - - /* second 3 bytes ECC code for 512 ecc size */ - if (chip->ecc.size == 512) { - ecc0 = bfin_read_NFC_ECC2(); - ecc1 = bfin_read_NFC_ECC3(); - code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); - - /* second 3 bytes in ecc_code for second 256 - * bytes of 512 page size - */ - p = (u8 *) (code + 1); - memcpy((ecc_code + 3), p, 3); - dev_dbg(info->device, "returning ecc 0x%08x\n", code[1]); - } - - return 0; -} - -/* - * PIO mode for buffer writing and reading - */ -static void bf5xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) -{ - int i; - unsigned short val; - - /* - * Data reads are requested by first writing to NFC_DATA_RD - * and then reading back from NFC_READ. - */ - for (i = 0; i < len; i++) { - while (bfin_read_NFC_STAT() & WB_FULL) - cpu_relax(); - - /* Contents do not matter */ - bfin_write_NFC_DATA_RD(0x0000); - SSYNC(); - - while ((bfin_read_NFC_IRQSTAT() & RD_RDY) != RD_RDY) - cpu_relax(); - - buf[i] = bfin_read_NFC_READ(); - - val = bfin_read_NFC_IRQSTAT(); - val |= RD_RDY; - bfin_write_NFC_IRQSTAT(val); - SSYNC(); - } -} - -static uint8_t bf5xx_nand_read_byte(struct mtd_info *mtd) -{ - uint8_t val; - - bf5xx_nand_read_buf(mtd, &val, 1); - - return val; -} - -static void bf5xx_nand_write_buf(struct mtd_info *mtd, - const uint8_t *buf, int len) -{ - int i; - - for (i = 0; i < len; i++) { - while (bfin_read_NFC_STAT() & WB_FULL) - cpu_relax(); - - bfin_write_NFC_DATA_WR(buf[i]); - SSYNC(); - } -} - -static void bf5xx_nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) -{ - int i; - u16 *p = (u16 *) buf; - len >>= 1; - - /* - * Data reads are requested by first writing to NFC_DATA_RD - * and then reading back from NFC_READ. - */ - bfin_write_NFC_DATA_RD(0x5555); - - SSYNC(); - - for (i = 0; i < len; i++) - p[i] = bfin_read_NFC_READ(); -} - -static void bf5xx_nand_write_buf16(struct mtd_info *mtd, - const uint8_t *buf, int len) -{ - int i; - u16 *p = (u16 *) buf; - len >>= 1; - - for (i = 0; i < len; i++) - bfin_write_NFC_DATA_WR(p[i]); - - SSYNC(); -} - -/* - * DMA functions for buffer writing and reading - */ -static irqreturn_t bf5xx_nand_dma_irq(int irq, void *dev_id) -{ - struct bf5xx_nand_info *info = dev_id; - - clear_dma_irqstat(CH_NFC); - disable_dma(CH_NFC); - complete(&info->dma_completion); - - return IRQ_HANDLED; -} - -static void bf5xx_nand_dma_rw(struct mtd_info *mtd, - uint8_t *buf, int is_read) -{ - struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); - struct nand_chip *chip = mtd_to_nand(mtd); - unsigned short val; - - dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n", - mtd, buf, is_read); - - /* - * Before starting a dma transfer, be sure to invalidate/flush - * the cache over the address range of your DMA buffer to - * prevent cache coherency problems. Otherwise very subtle bugs - * can be introduced to your driver. - */ - if (is_read) - invalidate_dcache_range((unsigned int)buf, - (unsigned int)(buf + chip->ecc.size)); - else - flush_dcache_range((unsigned int)buf, - (unsigned int)(buf + chip->ecc.size)); - - /* - * This register must be written before each page is - * transferred to generate the correct ECC register - * values. - */ - bfin_write_NFC_RST(ECC_RST); - SSYNC(); - while (bfin_read_NFC_RST() & ECC_RST) - cpu_relax(); - - disable_dma(CH_NFC); - clear_dma_irqstat(CH_NFC); - - /* setup DMA register with Blackfin DMA API */ - set_dma_config(CH_NFC, 0x0); - set_dma_start_addr(CH_NFC, (unsigned long) buf); - - /* The DMAs have different size on BF52x and BF54x */ -#ifdef CONFIG_BF52x - set_dma_x_count(CH_NFC, (chip->ecc.size >> 1)); - set_dma_x_modify(CH_NFC, 2); - val = DI_EN | WDSIZE_16; -#endif - -#ifdef CONFIG_BF54x - set_dma_x_count(CH_NFC, (chip->ecc.size >> 2)); - set_dma_x_modify(CH_NFC, 4); - val = DI_EN | WDSIZE_32; -#endif - /* setup write or read operation */ - if (is_read) - val |= WNR; - set_dma_config(CH_NFC, val); - enable_dma(CH_NFC); - - /* Start PAGE read/write operation */ - if (is_read) - bfin_write_NFC_PGCTL(PG_RD_START); - else - bfin_write_NFC_PGCTL(PG_WR_START); - wait_for_completion(&info->dma_completion); -} - -static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd, - uint8_t *buf, int len) -{ - struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); - struct nand_chip *chip = mtd_to_nand(mtd); - - dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len); - - if (len == chip->ecc.size) - bf5xx_nand_dma_rw(mtd, buf, 1); - else - bf5xx_nand_read_buf(mtd, buf, len); -} - -static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd, - const uint8_t *buf, int len) -{ - struct bf5xx_nand_info *info = mtd_to_nand_info(mtd); - struct nand_chip *chip = mtd_to_nand(mtd); - - dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len); - - if (len == chip->ecc.size) - bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0); - else - bf5xx_nand_write_buf(mtd, buf, len); -} - -static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) -{ - nand_read_page_op(chip, page, 0, NULL, 0); - - bf5xx_nand_read_buf(mtd, buf, mtd->writesize); - bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize); - - return 0; -} - -static int bf5xx_nand_write_page_raw(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf, int oob_required, - int page) -{ - nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize); - bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize); - - return nand_prog_page_end_op(chip); -} - -/* - * System initialization functions - */ -static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info) -{ - int ret; - - /* Do not use dma */ - if (!hardware_ecc) - return 0; - - init_completion(&info->dma_completion); - - /* Request NFC DMA channel */ - ret = request_dma(CH_NFC, "BF5XX NFC driver"); - if (ret < 0) { - dev_err(info->device, " unable to get DMA channel\n"); - return ret; - } - -#ifdef CONFIG_BF54x - /* Setup DMAC1 channel mux for NFC which shared with SDH */ - bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() & ~1); - SSYNC(); -#endif - - set_dma_callback(CH_NFC, bf5xx_nand_dma_irq, info); - - /* Turn off the DMA channel first */ - disable_dma(CH_NFC); - return 0; -} - -static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info) -{ - /* Free NFC DMA channel */ - if (hardware_ecc) - free_dma(CH_NFC); -} - -/* - * BF5XX NFC hardware initialization - * - pin mux setup - * - clear interrupt status - */ -static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info) -{ - int err = 0; - unsigned short val; - struct bf5xx_nand_platform *plat = info->platform; - - /* setup NFC_CTL register */ - dev_info(info->device, - "data_width=%d, wr_dly=%d, rd_dly=%d\n", - (plat->data_width ? 16 : 8), - plat->wr_dly, plat->rd_dly); - - val = (1 << NFC_PG_SIZE_OFFSET) | - (plat->data_width << NFC_NWIDTH_OFFSET) | - (plat->rd_dly << NFC_RDDLY_OFFSET) | - (plat->wr_dly << NFC_WRDLY_OFFSET); - dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val); - - bfin_write_NFC_CTL(val); - SSYNC(); - - /* clear interrupt status */ - bfin_write_NFC_IRQMASK(0x0); - SSYNC(); - val = bfin_read_NFC_IRQSTAT(); - bfin_write_NFC_IRQSTAT(val); - SSYNC(); - - /* DMA initialization */ - if (bf5xx_nand_dma_init(info)) - err = -ENXIO; - - return err; -} - -/* - * Device management interface - */ -static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info) -{ - struct mtd_info *mtd = nand_to_mtd(&info->chip); - struct mtd_partition *parts = info->platform->partitions; - int nr = info->platform->nr_partitions; - - return mtd_device_register(mtd, parts, nr); -} - -static int bf5xx_nand_remove(struct platform_device *pdev) -{ - struct bf5xx_nand_info *info = to_nand_info(pdev); - - /* first thing we need to do is release all our mtds - * and their partitions, then go through freeing the - * resources used - */ - nand_release(nand_to_mtd(&info->chip)); - - peripheral_free_list(bfin_nfc_pin_req); - bf5xx_nand_dma_remove(info); - - return 0; -} - -static int bf5xx_nand_scan(struct mtd_info *mtd) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - int ret; - - ret = nand_scan_ident(mtd, 1, NULL); - if (ret) - return ret; - - if (hardware_ecc) { - /* - * for nand with page size > 512B, think it as several sections with 512B - */ - if (likely(mtd->writesize >= 512)) { - chip->ecc.size = 512; - chip->ecc.bytes = 6; - chip->ecc.strength = 2; - } else { - chip->ecc.size = 256; - chip->ecc.bytes = 3; - chip->ecc.strength = 1; - bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET)); - SSYNC(); - } - } - - return nand_scan_tail(mtd); -} - -/* - * bf5xx_nand_probe - * - * called by device layer when it finds a device matching - * one our driver can handled. This code checks to see if - * it can allocate all necessary resources then calls the - * nand layer to look for devices - */ -static int bf5xx_nand_probe(struct platform_device *pdev) -{ - struct bf5xx_nand_platform *plat = to_nand_plat(pdev); - struct bf5xx_nand_info *info = NULL; - struct nand_chip *chip = NULL; - struct mtd_info *mtd = NULL; - int err = 0; - - dev_dbg(&pdev->dev, "(%p)\n", pdev); - - if (!plat) { - dev_err(&pdev->dev, "no platform specific information\n"); - return -EINVAL; - } - - if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) { - dev_err(&pdev->dev, "requesting Peripherals failed\n"); - return -EFAULT; - } - - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); - if (info == NULL) { - err = -ENOMEM; - goto out_err; - } - - platform_set_drvdata(pdev, info); - - nand_hw_control_init(&info->controller); - - info->device = &pdev->dev; - info->platform = plat; - - /* initialise chip data struct */ - chip = &info->chip; - mtd = nand_to_mtd(&info->chip); - - if (plat->data_width) - chip->options |= NAND_BUSWIDTH_16; - - chip->options |= NAND_CACHEPRG | NAND_SKIP_BBTSCAN; - - chip->read_buf = (plat->data_width) ? - bf5xx_nand_read_buf16 : bf5xx_nand_read_buf; - chip->write_buf = (plat->data_width) ? - bf5xx_nand_write_buf16 : bf5xx_nand_write_buf; - - chip->read_byte = bf5xx_nand_read_byte; - - chip->cmd_ctrl = bf5xx_nand_hwcontrol; - chip->dev_ready = bf5xx_nand_devready; - - nand_set_controller_data(chip, mtd); - chip->controller = &info->controller; - - chip->IO_ADDR_R = (void __iomem *) NFC_READ; - chip->IO_ADDR_W = (void __iomem *) NFC_DATA_WR; - - chip->chip_delay = 0; - - /* initialise mtd info data struct */ - mtd->dev.parent = &pdev->dev; - - /* initialise the hardware */ - err = bf5xx_nand_hw_init(info); - if (err) - goto out_err; - - /* setup hardware ECC data struct */ - if (hardware_ecc) { -#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC - mtd_set_ooblayout(mtd, &bootrom_ooblayout_ops); -#endif - chip->read_buf = bf5xx_nand_dma_read_buf; - chip->write_buf = bf5xx_nand_dma_write_buf; - chip->ecc.calculate = bf5xx_nand_calculate_ecc; - chip->ecc.correct = bf5xx_nand_correct_data; - chip->ecc.mode = NAND_ECC_HW; - chip->ecc.hwctl = bf5xx_nand_enable_hwecc; - chip->ecc.read_page_raw = bf5xx_nand_read_page_raw; - chip->ecc.write_page_raw = bf5xx_nand_write_page_raw; - } else { - chip->ecc.mode = NAND_ECC_SOFT; - chip->ecc.algo = NAND_ECC_HAMMING; - } - - /* scan hardware nand chip and setup mtd info data struct */ - if (bf5xx_nand_scan(mtd)) { - err = -ENXIO; - goto out_err_nand_scan; - } - -#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC - chip->badblockpos = 63; -#endif - - /* add NAND partition */ - bf5xx_nand_add_partition(info); - - dev_dbg(&pdev->dev, "initialised ok\n"); - return 0; - -out_err_nand_scan: - bf5xx_nand_dma_remove(info); -out_err: - peripheral_free_list(bfin_nfc_pin_req); - - return err; -} - -/* driver device registration */ -static struct platform_driver bf5xx_nand_driver = { - .probe = bf5xx_nand_probe, - .remove = bf5xx_nand_remove, - .driver = { - .name = DRV_NAME, - }, -}; - -module_platform_driver(bf5xx_nand_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR(DRV_AUTHOR); -MODULE_DESCRIPTION(DRV_DESC); -MODULE_ALIAS("platform:" DRV_NAME); |