diff options
Diffstat (limited to 'drivers/net/can/flexcan.c')
| -rw-r--r-- | drivers/net/can/flexcan.c | 174 |
1 files changed, 151 insertions, 23 deletions
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index f425ec2c7839..60f86bd0434a 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -62,7 +62,7 @@ #define FLEXCAN_MCR_BCC BIT(16) #define FLEXCAN_MCR_LPRIO_EN BIT(13) #define FLEXCAN_MCR_AEN BIT(12) -#define FLEXCAN_MCR_MAXMB(x) ((x) & 0x1f) +#define FLEXCAN_MCR_MAXMB(x) ((x) & 0x7f) #define FLEXCAN_MCR_IDAM_A (0 << 8) #define FLEXCAN_MCR_IDAM_B (1 << 8) #define FLEXCAN_MCR_IDAM_C (2 << 8) @@ -92,6 +92,27 @@ #define FLEXCAN_CTRL_ERR_ALL \ (FLEXCAN_CTRL_ERR_BUS | FLEXCAN_CTRL_ERR_STATE) +/* FLEXCAN control register 2 (CTRL2) bits */ +#define FLEXCAN_CRL2_ECRWRE BIT(29) +#define FLEXCAN_CRL2_WRMFRZ BIT(28) +#define FLEXCAN_CRL2_RFFN(x) (((x) & 0x0f) << 24) +#define FLEXCAN_CRL2_TASD(x) (((x) & 0x1f) << 19) +#define FLEXCAN_CRL2_MRP BIT(18) +#define FLEXCAN_CRL2_RRS BIT(17) +#define FLEXCAN_CRL2_EACEN BIT(16) + +/* FLEXCAN memory error control register (MECR) bits */ +#define FLEXCAN_MECR_ECRWRDIS BIT(31) +#define FLEXCAN_MECR_HANCEI_MSK BIT(19) +#define FLEXCAN_MECR_FANCEI_MSK BIT(18) +#define FLEXCAN_MECR_CEI_MSK BIT(16) +#define FLEXCAN_MECR_HAERRIE BIT(15) +#define FLEXCAN_MECR_FAERRIE BIT(14) +#define FLEXCAN_MECR_EXTERRIE BIT(13) +#define FLEXCAN_MECR_RERRDIS BIT(9) +#define FLEXCAN_MECR_ECCDIS BIT(8) +#define FLEXCAN_MECR_NCEFAFRZ BIT(7) + /* FLEXCAN error and status register (ESR) bits */ #define FLEXCAN_ESR_TWRN_INT BIT(17) #define FLEXCAN_ESR_RWRN_INT BIT(16) @@ -125,7 +146,9 @@ FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT) /* FLEXCAN interrupt flag register (IFLAG) bits */ -#define FLEXCAN_TX_BUF_ID 8 +/* Errata ERR005829 step7: Reserve first valid MB */ +#define FLEXCAN_TX_BUF_RESERVED 8 +#define FLEXCAN_TX_BUF_ID 9 #define FLEXCAN_IFLAG_BUF(x) BIT(x) #define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW BIT(7) #define FLEXCAN_IFLAG_RX_FIFO_WARN BIT(6) @@ -136,6 +159,17 @@ /* FLEXCAN message buffers */ #define FLEXCAN_MB_CNT_CODE(x) (((x) & 0xf) << 24) +#define FLEXCAN_MB_CODE_RX_INACTIVE (0x0 << 24) +#define FLEXCAN_MB_CODE_RX_EMPTY (0x4 << 24) +#define FLEXCAN_MB_CODE_RX_FULL (0x2 << 24) +#define FLEXCAN_MB_CODE_RX_OVERRRUN (0x6 << 24) +#define FLEXCAN_MB_CODE_RX_RANSWER (0xa << 24) + +#define FLEXCAN_MB_CODE_TX_INACTIVE (0x8 << 24) +#define FLEXCAN_MB_CODE_TX_ABORT (0x9 << 24) +#define FLEXCAN_MB_CODE_TX_DATA (0xc << 24) +#define FLEXCAN_MB_CODE_TX_TANSWER (0xe << 24) + #define FLEXCAN_MB_CNT_SRR BIT(22) #define FLEXCAN_MB_CNT_IDE BIT(21) #define FLEXCAN_MB_CNT_RTR BIT(20) @@ -150,18 +184,20 @@ * FLEXCAN hardware feature flags * * Below is some version info we got: - * SOC Version IP-Version Glitch- [TR]WRN_INT - * Filter? connected? - * MX25 FlexCAN2 03.00.00.00 no no - * MX28 FlexCAN2 03.00.04.00 yes yes - * MX35 FlexCAN2 03.00.00.00 no no - * MX53 FlexCAN2 03.00.00.00 yes no - * MX6s FlexCAN3 10.00.12.00 yes yes + * SOC Version IP-Version Glitch- [TR]WRN_INT Memory err + * Filter? connected? detection + * MX25 FlexCAN2 03.00.00.00 no no no + * MX28 FlexCAN2 03.00.04.00 yes yes no + * MX35 FlexCAN2 03.00.00.00 no no no + * MX53 FlexCAN2 03.00.00.00 yes no no + * MX6s FlexCAN3 10.00.12.00 yes yes no + * VF610 FlexCAN3 ? no yes yes * * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected. */ #define FLEXCAN_HAS_V10_FEATURES BIT(1) /* For core version >= 10 */ #define FLEXCAN_HAS_BROKEN_ERR_STATE BIT(2) /* [TR]WRN_INT not connected */ +#define FLEXCAN_HAS_MECR_FEATURES BIT(3) /* Memory error detection */ /* Structure of the message buffer */ struct flexcan_mb { @@ -192,8 +228,17 @@ struct flexcan_regs { u32 crcr; /* 0x44 */ u32 rxfgmask; /* 0x48 */ u32 rxfir; /* 0x4c */ - u32 _reserved3[12]; - struct flexcan_mb cantxfg[64]; + u32 _reserved3[12]; /* 0x50 */ + struct flexcan_mb cantxfg[64]; /* 0x80 */ + u32 _reserved4[408]; + u32 mecr; /* 0xae0 */ + u32 erriar; /* 0xae4 */ + u32 erridpr; /* 0xae8 */ + u32 errippr; /* 0xaec */ + u32 rerrar; /* 0xaf0 */ + u32 rerrdr; /* 0xaf4 */ + u32 rerrsynr; /* 0xaf8 */ + u32 errsr; /* 0xafc */ }; struct flexcan_devtype_data { @@ -223,6 +268,9 @@ static struct flexcan_devtype_data fsl_imx28_devtype_data; static struct flexcan_devtype_data fsl_imx6q_devtype_data = { .features = FLEXCAN_HAS_V10_FEATURES, }; +static struct flexcan_devtype_data fsl_vf610_devtype_data = { + .features = FLEXCAN_HAS_V10_FEATURES | FLEXCAN_HAS_MECR_FEATURES, +}; static const struct can_bittiming_const flexcan_bittiming_const = { .name = DRV_NAME, @@ -298,7 +346,7 @@ static int flexcan_chip_enable(struct flexcan_priv *priv) flexcan_write(reg, ®s->mcr); while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) - usleep_range(10, 20); + udelay(10); if (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK) return -ETIMEDOUT; @@ -317,7 +365,7 @@ static int flexcan_chip_disable(struct flexcan_priv *priv) flexcan_write(reg, ®s->mcr); while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) - usleep_range(10, 20); + udelay(10); if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) return -ETIMEDOUT; @@ -336,7 +384,7 @@ static int flexcan_chip_freeze(struct flexcan_priv *priv) flexcan_write(reg, ®s->mcr); while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) - usleep_range(100, 200); + udelay(100); if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) return -ETIMEDOUT; @@ -355,7 +403,7 @@ static int flexcan_chip_unfreeze(struct flexcan_priv *priv) flexcan_write(reg, ®s->mcr); while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) - usleep_range(10, 20); + udelay(10); if (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK) return -ETIMEDOUT; @@ -370,7 +418,7 @@ static int flexcan_chip_softreset(struct flexcan_priv *priv) flexcan_write(FLEXCAN_MCR_SOFTRST, ®s->mcr); while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_SOFTRST)) - usleep_range(10, 20); + udelay(10); if (flexcan_read(®s->mcr) & FLEXCAN_MCR_SOFTRST) return -ETIMEDOUT; @@ -378,8 +426,9 @@ static int flexcan_chip_softreset(struct flexcan_priv *priv) return 0; } -static int flexcan_get_berr_counter(const struct net_device *dev, - struct can_berr_counter *bec) + +static int __flexcan_get_berr_counter(const struct net_device *dev, + struct can_berr_counter *bec) { const struct flexcan_priv *priv = netdev_priv(dev); struct flexcan_regs __iomem *regs = priv->base; @@ -391,6 +440,29 @@ static int flexcan_get_berr_counter(const struct net_device *dev, return 0; } +static int flexcan_get_berr_counter(const struct net_device *dev, + struct can_berr_counter *bec) +{ + const struct flexcan_priv *priv = netdev_priv(dev); + int err; + + err = clk_prepare_enable(priv->clk_ipg); + if (err) + return err; + + err = clk_prepare_enable(priv->clk_per); + if (err) + goto out_disable_ipg; + + err = __flexcan_get_berr_counter(dev, bec); + + clk_disable_unprepare(priv->clk_per); + out_disable_ipg: + clk_disable_unprepare(priv->clk_ipg); + + return err; +} + static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev) { const struct flexcan_priv *priv = netdev_priv(dev); @@ -428,6 +500,14 @@ static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev) flexcan_write(can_id, ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_id); flexcan_write(ctrl, ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl); + /* Errata ERR005829 step8: + * Write twice INACTIVE(0x8) code to first MB. + */ + flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE, + ®s->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl); + flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE, + ®s->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl); + return NETDEV_TX_OK; } @@ -503,7 +583,7 @@ static void do_state(struct net_device *dev, struct flexcan_priv *priv = netdev_priv(dev); struct can_berr_counter bec; - flexcan_get_berr_counter(dev, &bec); + __flexcan_get_berr_counter(dev, &bec); switch (priv->can.state) { case CAN_STATE_ERROR_ACTIVE: @@ -549,6 +629,13 @@ static void do_state(struct net_device *dev, /* process state changes depending on the new state */ switch (new_state) { + case CAN_STATE_ERROR_WARNING: + netdev_dbg(dev, "Error Warning\n"); + cf->can_id |= CAN_ERR_CRTL; + cf->data[1] = (bec.txerr > bec.rxerr) ? + CAN_ERR_CRTL_TX_WARNING : + CAN_ERR_CRTL_RX_WARNING; + break; case CAN_STATE_ERROR_ACTIVE: netdev_dbg(dev, "Error Active\n"); cf->can_id |= CAN_ERR_PROT; @@ -737,6 +824,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) stats->tx_bytes += can_get_echo_skb(dev, 0); stats->tx_packets++; can_led_event(dev, CAN_LED_EVENT_TX); + /* after sending a RTR frame mailbox is in RX mode */ + flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE, + ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl); flexcan_write((1 << FLEXCAN_TX_BUF_ID), ®s->iflag1); netif_wake_queue(dev); } @@ -792,8 +882,8 @@ static int flexcan_chip_start(struct net_device *dev) { struct flexcan_priv *priv = netdev_priv(dev); struct flexcan_regs __iomem *regs = priv->base; - int err; - u32 reg_mcr, reg_ctrl; + u32 reg_mcr, reg_ctrl, reg_crl2, reg_mecr; + int err, i; /* enable module */ err = flexcan_chip_enable(priv); @@ -852,14 +942,26 @@ static int flexcan_chip_start(struct net_device *dev) if (priv->devtype_data->features & FLEXCAN_HAS_BROKEN_ERR_STATE || priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) reg_ctrl |= FLEXCAN_CTRL_ERR_MSK; + else + reg_ctrl &= ~FLEXCAN_CTRL_ERR_MSK; /* save for later use */ priv->reg_ctrl_default = reg_ctrl; netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl); flexcan_write(reg_ctrl, ®s->ctrl); - /* Abort any pending TX, mark Mailbox as INACTIVE */ - flexcan_write(FLEXCAN_MB_CNT_CODE(0x4), + /* clear and invalidate all mailboxes first */ + for (i = FLEXCAN_TX_BUF_ID; i < ARRAY_SIZE(regs->cantxfg); i++) { + flexcan_write(FLEXCAN_MB_CODE_RX_INACTIVE, + ®s->cantxfg[i].can_ctrl); + } + + /* Errata ERR005829: mark first TX mailbox as INACTIVE */ + flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE, + ®s->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl); + + /* mark TX mailbox as INACTIVE */ + flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE, ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl); /* acceptance mask/acceptance code (accept everything) */ @@ -870,6 +972,31 @@ static int flexcan_chip_start(struct net_device *dev) if (priv->devtype_data->features & FLEXCAN_HAS_V10_FEATURES) flexcan_write(0x0, ®s->rxfgmask); + /* + * On Vybrid, disable memory error detection interrupts + * and freeze mode. + * This also works around errata e5295 which generates + * false positive memory errors and put the device in + * freeze mode. + */ + if (priv->devtype_data->features & FLEXCAN_HAS_MECR_FEATURES) { + /* + * Follow the protocol as described in "Detection + * and Correction of Memory Errors" to write to + * MECR register + */ + reg_crl2 = flexcan_read(®s->crl2); + reg_crl2 |= FLEXCAN_CRL2_ECRWRE; + flexcan_write(reg_crl2, ®s->crl2); + + reg_mecr = flexcan_read(®s->mecr); + reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS; + flexcan_write(reg_mecr, ®s->mecr); + reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK | + FLEXCAN_MECR_FANCEI_MSK); + flexcan_write(reg_mecr, ®s->mecr); + } + err = flexcan_transceiver_enable(priv); if (err) goto out_chip_disable; @@ -1080,6 +1207,7 @@ static const struct of_device_id flexcan_of_match[] = { { .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, }, { .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, }, { .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, }, + { .compatible = "fsl,vf610-flexcan", .data = &fsl_vf610_devtype_data, }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, flexcan_of_match); |