1 files changed, 70 insertions, 61 deletions

diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index 3005157059ca..018ca3b057a3 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -63,21 +63,27 @@ enum gs_can_identify_mode {
 };
 
 /* data types passed between host and device */
+
+/* The firmware on the original USB2CAN by Geschwister Schneider
+ * Technologie Entwicklungs- und Vertriebs UG exchanges all data
+ * between the host and the device in host byte order. This is done
+ * with the struct gs_host_config::byte_order member, which is sent
+ * first to indicate the desired byte order.
+ *
+ * The widely used open source firmware candleLight doesn't support
+ * this feature and exchanges the data in little endian byte order.
+ */
 struct gs_host_config {
-	u32 byte_order;
+	__le32 byte_order;
 } __packed;
-/* All data exchanged between host and device is exchanged in host byte order,
- * thanks to the struct gs_host_config byte_order member, which is sent first
- * to indicate the desired byte order.
- */
 
 struct gs_device_config {
 	u8 reserved1;
 	u8 reserved2;
 	u8 reserved3;
 	u8 icount;
-	u32 sw_version;
-	u32 hw_version;
+	__le32 sw_version;
+	__le32 hw_version;
 } __packed;
 
 #define GS_CAN_MODE_NORMAL               0
@@ -87,26 +93,26 @@ struct gs_device_config {
 #define GS_CAN_MODE_ONE_SHOT             BIT(3)
 
 struct gs_device_mode {
-	u32 mode;
-	u32 flags;
+	__le32 mode;
+	__le32 flags;
 } __packed;
 
 struct gs_device_state {
-	u32 state;
-	u32 rxerr;
-	u32 txerr;
+	__le32 state;
+	__le32 rxerr;
+	__le32 txerr;
 } __packed;
 
 struct gs_device_bittiming {
-	u32 prop_seg;
-	u32 phase_seg1;
-	u32 phase_seg2;
-	u32 sjw;
-	u32 brp;
+	__le32 prop_seg;
+	__le32 phase_seg1;
+	__le32 phase_seg2;
+	__le32 sjw;
+	__le32 brp;
 } __packed;
 
 struct gs_identify_mode {
-	u32 mode;
+	__le32 mode;
 } __packed;
 
 #define GS_CAN_FEATURE_LISTEN_ONLY      BIT(0)
@@ -117,23 +123,23 @@ struct gs_identify_mode {
 #define GS_CAN_FEATURE_IDENTIFY         BIT(5)
 
 struct gs_device_bt_const {
-	u32 feature;
-	u32 fclk_can;
-	u32 tseg1_min;
-	u32 tseg1_max;
-	u32 tseg2_min;
-	u32 tseg2_max;
-	u32 sjw_max;
-	u32 brp_min;
-	u32 brp_max;
-	u32 brp_inc;
+	__le32 feature;
+	__le32 fclk_can;
+	__le32 tseg1_min;
+	__le32 tseg1_max;
+	__le32 tseg2_min;
+	__le32 tseg2_max;
+	__le32 sjw_max;
+	__le32 brp_min;
+	__le32 brp_max;
+	__le32 brp_inc;
 } __packed;
 
 #define GS_CAN_FLAG_OVERFLOW 1
 
 struct gs_host_frame {
 	u32 echo_id;
-	u32 can_id;
+	__le32 can_id;
 
 	u8 can_dlc;
 	u8 channel;
@@ -329,13 +335,13 @@ static void gs_usb_receive_bulk_callback(struct urb *urb)
 		if (!skb)
 			return;
 
-		cf->can_id = hf->can_id;
+		cf->can_id = le32_to_cpu(hf->can_id);
 
 		cf->can_dlc = get_can_dlc(hf->can_dlc);
 		memcpy(cf->data, hf->data, 8);
 
 		/* ERROR frames tell us information about the controller */
-		if (hf->can_id & CAN_ERR_FLAG)
+		if (le32_to_cpu(hf->can_id) & CAN_ERR_FLAG)
 			gs_update_state(dev, cf);
 
 		netdev->stats.rx_packets++;
@@ -418,11 +424,11 @@ static int gs_usb_set_bittiming(struct net_device *netdev)
 	if (!dbt)
 		return -ENOMEM;
 
-	dbt->prop_seg = bt->prop_seg;
-	dbt->phase_seg1 = bt->phase_seg1;
-	dbt->phase_seg2 = bt->phase_seg2;
-	dbt->sjw = bt->sjw;
-	dbt->brp = bt->brp;
+	dbt->prop_seg = cpu_to_le32(bt->prop_seg);
+	dbt->phase_seg1 = cpu_to_le32(bt->phase_seg1);
+	dbt->phase_seg2 = cpu_to_le32(bt->phase_seg2);
+	dbt->sjw = cpu_to_le32(bt->sjw);
+	dbt->brp = cpu_to_le32(bt->brp);
 
 	/* request bit timings */
 	rc = usb_control_msg(interface_to_usbdev(intf),
@@ -503,7 +509,7 @@ static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb,
 
 	cf = (struct can_frame *)skb->data;
 
-	hf->can_id = cf->can_id;
+	hf->can_id = cpu_to_le32(cf->can_id);
 	hf->can_dlc = cf->can_dlc;
 	memcpy(hf->data, cf->data, cf->can_dlc);
 
@@ -573,6 +579,7 @@ static int gs_can_open(struct net_device *netdev)
 	int rc, i;
 	struct gs_device_mode *dm;
 	u32 ctrlmode;
+	u32 flags = 0;
 
 	rc = open_candev(netdev);
 	if (rc)
@@ -640,24 +647,24 @@ static int gs_can_open(struct net_device *netdev)
 
 	/* flags */
 	ctrlmode = dev->can.ctrlmode;
-	dm->flags = 0;
 
 	if (ctrlmode & CAN_CTRLMODE_LOOPBACK)
-		dm->flags |= GS_CAN_MODE_LOOP_BACK;
+		flags |= GS_CAN_MODE_LOOP_BACK;
 	else if (ctrlmode & CAN_CTRLMODE_LISTENONLY)
-		dm->flags |= GS_CAN_MODE_LISTEN_ONLY;
+		flags |= GS_CAN_MODE_LISTEN_ONLY;
 
 	/* Controller is not allowed to retry TX
 	 * this mode is unavailable on atmels uc3c hardware
 	 */
 	if (ctrlmode & CAN_CTRLMODE_ONE_SHOT)
-		dm->flags |= GS_CAN_MODE_ONE_SHOT;
+		flags |= GS_CAN_MODE_ONE_SHOT;
 
 	if (ctrlmode & CAN_CTRLMODE_3_SAMPLES)
-		dm->flags |= GS_CAN_MODE_TRIPLE_SAMPLE;
+		flags |= GS_CAN_MODE_TRIPLE_SAMPLE;
 
 	/* finally start device */
-	dm->mode = GS_CAN_MODE_START;
+	dm->mode = cpu_to_le32(GS_CAN_MODE_START);
+	dm->flags = cpu_to_le32(flags);
 	rc = usb_control_msg(interface_to_usbdev(dev->iface),
 			     usb_sndctrlpipe(interface_to_usbdev(dev->iface), 0),
 			     GS_USB_BREQ_MODE,
@@ -737,9 +744,9 @@ static int gs_usb_set_identify(struct net_device *netdev, bool do_identify)
 		return -ENOMEM;
 
 	if (do_identify)
-		imode->mode = GS_CAN_IDENTIFY_ON;
+		imode->mode = cpu_to_le32(GS_CAN_IDENTIFY_ON);
 	else
-		imode->mode = GS_CAN_IDENTIFY_OFF;
+		imode->mode = cpu_to_le32(GS_CAN_IDENTIFY_OFF);
 
 	rc = usb_control_msg(interface_to_usbdev(dev->iface),
 			     usb_sndctrlpipe(interface_to_usbdev(dev->iface),
@@ -790,6 +797,7 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 	struct net_device *netdev;
 	int rc;
 	struct gs_device_bt_const *bt_const;
+	u32 feature;
 
 	bt_const = kmalloc(sizeof(*bt_const), GFP_KERNEL);
 	if (!bt_const)
@@ -830,14 +838,14 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 
 	/* dev setup */
 	strcpy(dev->bt_const.name, "gs_usb");
-	dev->bt_const.tseg1_min = bt_const->tseg1_min;
-	dev->bt_const.tseg1_max = bt_const->tseg1_max;
-	dev->bt_const.tseg2_min = bt_const->tseg2_min;
-	dev->bt_const.tseg2_max = bt_const->tseg2_max;
-	dev->bt_const.sjw_max = bt_const->sjw_max;
-	dev->bt_const.brp_min = bt_const->brp_min;
-	dev->bt_const.brp_max = bt_const->brp_max;
-	dev->bt_const.brp_inc = bt_const->brp_inc;
+	dev->bt_const.tseg1_min = le32_to_cpu(bt_const->tseg1_min);
+	dev->bt_const.tseg1_max = le32_to_cpu(bt_const->tseg1_max);
+	dev->bt_const.tseg2_min = le32_to_cpu(bt_const->tseg2_min);
+	dev->bt_const.tseg2_max = le32_to_cpu(bt_const->tseg2_max);
+	dev->bt_const.sjw_max = le32_to_cpu(bt_const->sjw_max);
+	dev->bt_const.brp_min = le32_to_cpu(bt_const->brp_min);
+	dev->bt_const.brp_max = le32_to_cpu(bt_const->brp_max);
+	dev->bt_const.brp_inc = le32_to_cpu(bt_const->brp_inc);
 
 	dev->udev = interface_to_usbdev(intf);
 	dev->iface = intf;
@@ -854,28 +862,29 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 
 	/* can setup */
 	dev->can.state = CAN_STATE_STOPPED;
-	dev->can.clock.freq = bt_const->fclk_can;
+	dev->can.clock.freq = le32_to_cpu(bt_const->fclk_can);
 	dev->can.bittiming_const = &dev->bt_const;
 	dev->can.do_set_bittiming = gs_usb_set_bittiming;
 
 	dev->can.ctrlmode_supported = 0;
 
-	if (bt_const->feature & GS_CAN_FEATURE_LISTEN_ONLY)
+	feature = le32_to_cpu(bt_const->feature);
+	if (feature & GS_CAN_FEATURE_LISTEN_ONLY)
 		dev->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY;
 
-	if (bt_const->feature & GS_CAN_FEATURE_LOOP_BACK)
+	if (feature & GS_CAN_FEATURE_LOOP_BACK)
 		dev->can.ctrlmode_supported |= CAN_CTRLMODE_LOOPBACK;
 
-	if (bt_const->feature & GS_CAN_FEATURE_TRIPLE_SAMPLE)
+	if (feature & GS_CAN_FEATURE_TRIPLE_SAMPLE)
 		dev->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
 
-	if (bt_const->feature & GS_CAN_FEATURE_ONE_SHOT)
+	if (feature & GS_CAN_FEATURE_ONE_SHOT)
 		dev->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT;
 
 	SET_NETDEV_DEV(netdev, &intf->dev);
 
-	if (dconf->sw_version > 1)
-		if (bt_const->feature & GS_CAN_FEATURE_IDENTIFY)
+	if (le32_to_cpu(dconf->sw_version) > 1)
+		if (feature & GS_CAN_FEATURE_IDENTIFY)
 			netdev->ethtool_ops = &gs_usb_ethtool_ops;
 
 	kfree(bt_const);
@@ -910,7 +919,7 @@ static int gs_usb_probe(struct usb_interface *intf,
 	if (!hconf)
 		return -ENOMEM;
 
-	hconf->byte_order = 0x0000beef;
+	hconf->byte_order = cpu_to_le32(0x0000beef);
 
 	/* send host config */
 	rc = usb_control_msg(interface_to_usbdev(intf),