diff options
Diffstat (limited to 'drivers/net/can')
26 files changed, 1310 insertions, 53 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index b56bd9e80957..1cca19f1c490 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -1,9 +1,7 @@ menu "CAN Device Drivers" - depends on CAN config CAN_VCAN tristate "Virtual Local CAN Interface (vcan)" - depends on CAN ---help--- Similar to the network loopback devices, vcan offers a virtual local CAN interface. @@ -13,7 +11,6 @@ config CAN_VCAN config CAN_SLCAN tristate "Serial / USB serial CAN Adaptors (slcan)" - depends on CAN ---help--- CAN driver for several 'low cost' CAN interfaces that are attached via serial lines or via USB-to-serial adapters using the LAWICEL @@ -33,16 +30,16 @@ config CAN_SLCAN config CAN_DEV tristate "Platform CAN drivers with Netlink support" - depends on CAN default y ---help--- Enables the common framework for platform CAN drivers with Netlink support. This is the standard library for CAN drivers. If unsure, say Y. +if CAN_DEV + config CAN_CALC_BITTIMING bool "CAN bit-timing calculation" - depends on CAN_DEV default y ---help--- If enabled, CAN bit-timing parameters will be calculated for the @@ -54,15 +51,26 @@ config CAN_CALC_BITTIMING arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". If unsure, say Y. +config CAN_LEDS + bool "Enable LED triggers for Netlink based drivers" + depends on LEDS_CLASS + select LEDS_TRIGGERS + ---help--- + This option adds two LED triggers for packet receive and transmit + events on each supported CAN device. + + Say Y here if you are working on a system with led-class supported + LEDs and you want to use them as canbus activity indicators. + config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" - depends on CAN_DEV && (ARCH_AT91SAM9263 || ARCH_AT91SAM9X5) + depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9X5 ---help--- This is a driver for the SoC CAN controller in Atmel's AT91SAM9263 and AT91SAM9X5 processors. config CAN_TI_HECC - depends on CAN_DEV && ARCH_OMAP3 + depends on ARCH_OMAP3 tristate "TI High End CAN Controller" ---help--- Driver for TI HECC (High End CAN Controller) module found on many @@ -70,12 +78,12 @@ config CAN_TI_HECC config CAN_MCP251X tristate "Microchip MCP251x SPI CAN controllers" - depends on CAN_DEV && SPI && HAS_DMA + depends on SPI && HAS_DMA ---help--- Driver for the Microchip MCP251x SPI CAN controllers. config CAN_BFIN - depends on CAN_DEV && (BF534 || BF536 || BF537 || BF538 || BF539 || BF54x) + depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x tristate "Analog Devices Blackfin on-chip CAN" ---help--- Driver for the Analog Devices Blackfin on-chip CAN controllers @@ -85,7 +93,7 @@ config CAN_BFIN config CAN_JANZ_ICAN3 tristate "Janz VMOD-ICAN3 Intelligent CAN controller" - depends on CAN_DEV && MFD_JANZ_CMODIO + depends on MFD_JANZ_CMODIO ---help--- Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which connects to a MODULbus carrier board. @@ -98,13 +106,13 @@ config HAVE_CAN_FLEXCAN config CAN_FLEXCAN tristate "Support for Freescale FLEXCAN based chips" - depends on CAN_DEV && HAVE_CAN_FLEXCAN + depends on HAVE_CAN_FLEXCAN ---help--- Say Y here if you want to support for Freescale FlexCAN. config PCH_CAN tristate "Intel EG20T PCH CAN controller" - depends on CAN_DEV && PCI + depends on PCI ---help--- This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which is an IOH for x86 embedded processor (Intel Atom E6xx series). @@ -112,7 +120,7 @@ config PCH_CAN config CAN_GRCAN tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices" - depends on CAN_DEV && OF + depends on OF ---help--- Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN. Note that the driver supports little endian, even though little @@ -131,9 +139,10 @@ source "drivers/net/can/usb/Kconfig" source "drivers/net/can/softing/Kconfig" +endif + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" - depends on CAN ---help--- Say Y here if you want the CAN device drivers to produce a bunch of debug messages to the system log. Select this if you are having diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile index 7de59862bbe9..c7440392adbb 100644 --- a/drivers/net/can/Makefile +++ b/drivers/net/can/Makefile @@ -8,6 +8,8 @@ obj-$(CONFIG_CAN_SLCAN) += slcan.o obj-$(CONFIG_CAN_DEV) += can-dev.o can-dev-y := dev.o +can-dev-$(CONFIG_CAN_LEDS) += led.o + obj-y += usb/ obj-y += softing/ diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 81baefda037b..44f363792b59 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -37,6 +37,7 @@ #include <linux/can/dev.h> #include <linux/can/error.h> +#include <linux/can/led.h> #define AT91_MB_MASK(i) ((1 << (i)) - 1) @@ -641,6 +642,8 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb) stats->rx_packets++; stats->rx_bytes += cf->can_dlc; + + can_led_event(dev, CAN_LED_EVENT_RX); } /** @@ -875,6 +878,7 @@ static void at91_irq_tx(struct net_device *dev, u32 reg_sr) /* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */ can_get_echo_skb(dev, mb - get_mb_tx_first(priv)); dev->stats.tx_packets++; + can_led_event(dev, CAN_LED_EVENT_TX); } } @@ -1128,6 +1132,8 @@ static int at91_open(struct net_device *dev) goto out_close; } + can_led_event(dev, CAN_LED_EVENT_OPEN); + /* start chip and queuing */ at91_chip_start(dev); napi_enable(&priv->napi); @@ -1159,6 +1165,8 @@ static int at91_close(struct net_device *dev) close_candev(dev); + can_led_event(dev, CAN_LED_EVENT_STOP); + return 0; } @@ -1321,6 +1329,8 @@ static int at91_can_probe(struct platform_device *pdev) goto exit_free; } + devm_can_led_init(dev); + dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n", priv->reg_base, dev->irq); diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig index 3b83bafcd947..61ffc12d8fd8 100644 --- a/drivers/net/can/c_can/Kconfig +++ b/drivers/net/can/c_can/Kconfig @@ -1,6 +1,6 @@ menuconfig CAN_C_CAN tristate "Bosch C_CAN/D_CAN devices" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM if CAN_C_CAN diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 2282b1ae9765..a668cd491cb3 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -39,6 +39,7 @@ #include <linux/can.h> #include <linux/can/dev.h> #include <linux/can/error.h> +#include <linux/can/led.h> #include "c_can.h" @@ -477,6 +478,8 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, int ctrl) stats->rx_packets++; stats->rx_bytes += frame->can_dlc; + can_led_event(dev, CAN_LED_EVENT_RX); + return 0; } @@ -755,6 +758,7 @@ static void c_can_do_tx(struct net_device *dev) C_CAN_IFACE(MSGCTRL_REG, 0)) & IF_MCONT_DLC_MASK; stats->tx_packets++; + can_led_event(dev, CAN_LED_EVENT_TX); c_can_inval_msg_object(dev, 0, msg_obj_no); } else { break; @@ -1119,6 +1123,8 @@ static int c_can_open(struct net_device *dev) napi_enable(&priv->napi); + can_led_event(dev, CAN_LED_EVENT_OPEN); + /* start the c_can controller */ c_can_start(dev); @@ -1147,6 +1153,8 @@ static int c_can_close(struct net_device *dev) c_can_reset_ram(priv, false); c_can_pm_runtime_put_sync(priv); + can_led_event(dev, CAN_LED_EVENT_STOP); + return 0; } @@ -1272,6 +1280,8 @@ int register_c_can_dev(struct net_device *dev) err = register_candev(dev); if (err) c_can_pm_runtime_disable(priv); + else + devm_can_led_init(dev); return err; } diff --git a/drivers/net/can/cc770/Kconfig b/drivers/net/can/cc770/Kconfig index 22c07a8c8b43..6a9a5ba79220 100644 --- a/drivers/net/can/cc770/Kconfig +++ b/drivers/net/can/cc770/Kconfig @@ -1,6 +1,6 @@ menuconfig CAN_CC770 tristate "Bosch CC770 and Intel AN82527 devices" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM if CAN_CC770 diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 8233e5ed2939..f9cba4123c66 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -24,7 +24,9 @@ #include <linux/if_arp.h> #include <linux/can.h> #include <linux/can/dev.h> +#include <linux/can/skb.h> #include <linux/can/netlink.h> +#include <linux/can/led.h> #include <net/rtnetlink.h> #define MOD_DESC "CAN device driver interface" @@ -501,13 +503,18 @@ struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf) { struct sk_buff *skb; - skb = netdev_alloc_skb(dev, sizeof(struct can_frame)); + skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) + + sizeof(struct can_frame)); if (unlikely(!skb)) return NULL; skb->protocol = htons(ETH_P_CAN); skb->pkt_type = PACKET_BROADCAST; skb->ip_summed = CHECKSUM_UNNECESSARY; + + can_skb_reserve(skb); + can_skb_prv(skb)->ifindex = dev->ifindex; + *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); memset(*cf, 0, sizeof(struct can_frame)); @@ -794,10 +801,25 @@ void unregister_candev(struct net_device *dev) } EXPORT_SYMBOL_GPL(unregister_candev); +/* + * Test if a network device is a candev based device + * and return the can_priv* if so. + */ +struct can_priv *safe_candev_priv(struct net_device *dev) +{ + if ((dev->type != ARPHRD_CAN) || (dev->rtnl_link_ops != &can_link_ops)) + return NULL; + + return netdev_priv(dev); +} +EXPORT_SYMBOL_GPL(safe_candev_priv); + static __init int can_dev_init(void) { int err; + can_led_notifier_init(); + err = rtnl_link_register(&can_link_ops); if (!err) printk(KERN_INFO MOD_DESC "\n"); @@ -809,6 +831,8 @@ module_init(can_dev_init); static __exit void can_dev_exit(void) { rtnl_link_unregister(&can_link_ops); + + can_led_notifier_exit(); } module_exit(can_dev_exit); diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 0289a6d86f66..769d29ed106d 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -23,6 +23,7 @@ #include <linux/can.h> #include <linux/can/dev.h> #include <linux/can/error.h> +#include <linux/can/led.h> #include <linux/can/platform/flexcan.h> #include <linux/clk.h> #include <linux/delay.h> @@ -564,6 +565,8 @@ static int flexcan_read_frame(struct net_device *dev) stats->rx_packets++; stats->rx_bytes += cf->can_dlc; + can_led_event(dev, CAN_LED_EVENT_RX); + return 1; } @@ -652,6 +655,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) if (reg_iflag1 & (1 << FLEXCAN_TX_BUF_ID)) { stats->tx_bytes += can_get_echo_skb(dev, 0); stats->tx_packets++; + can_led_event(dev, CAN_LED_EVENT_TX); flexcan_write((1 << FLEXCAN_TX_BUF_ID), ®s->iflag1); netif_wake_queue(dev); } @@ -865,6 +869,9 @@ static int flexcan_open(struct net_device *dev) err = flexcan_chip_start(dev); if (err) goto out_close; + + can_led_event(dev, CAN_LED_EVENT_OPEN); + napi_enable(&priv->napi); netif_start_queue(dev); @@ -893,6 +900,8 @@ static int flexcan_close(struct net_device *dev) close_candev(dev); + can_led_event(dev, CAN_LED_EVENT_STOP); + return 0; } @@ -1092,6 +1101,8 @@ static int flexcan_probe(struct platform_device *pdev) goto failed_register; } + devm_can_led_init(dev); + dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n", priv->base, dev->irq); diff --git a/drivers/net/can/led.c b/drivers/net/can/led.c new file mode 100644 index 000000000000..f27fca65dc4a --- /dev/null +++ b/drivers/net/can/led.c @@ -0,0 +1,124 @@ +/* + * Copyright 2012, Fabio Baltieri <fabio.baltieri@gmail.com> + * Copyright 2012, Kurt Van Dijck <kurt.van.dijck@eia.be> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/netdevice.h> +#include <linux/can/dev.h> + +#include <linux/can/led.h> + +static unsigned long led_delay = 50; +module_param(led_delay, ulong, 0644); +MODULE_PARM_DESC(led_delay, + "blink delay time for activity leds (msecs, default: 50)."); + +/* Trigger a LED event in response to a CAN device event */ +void can_led_event(struct net_device *netdev, enum can_led_event event) +{ + struct can_priv *priv = netdev_priv(netdev); + + switch (event) { + case CAN_LED_EVENT_OPEN: + led_trigger_event(priv->tx_led_trig, LED_FULL); + led_trigger_event(priv->rx_led_trig, LED_FULL); + break; + case CAN_LED_EVENT_STOP: + led_trigger_event(priv->tx_led_trig, LED_OFF); + led_trigger_event(priv->rx_led_trig, LED_OFF); + break; + case CAN_LED_EVENT_TX: + if (led_delay) + led_trigger_blink_oneshot(priv->tx_led_trig, + &led_delay, &led_delay, 1); + break; + case CAN_LED_EVENT_RX: + if (led_delay) + led_trigger_blink_oneshot(priv->rx_led_trig, + &led_delay, &led_delay, 1); + break; + } +} +EXPORT_SYMBOL_GPL(can_led_event); + +static void can_led_release(struct device *gendev, void *res) +{ + struct can_priv *priv = netdev_priv(to_net_dev(gendev)); + + led_trigger_unregister_simple(priv->tx_led_trig); + led_trigger_unregister_simple(priv->rx_led_trig); +} + +/* Register CAN LED triggers for a CAN device + * + * This is normally called from a driver's probe function + */ +void devm_can_led_init(struct net_device *netdev) +{ + struct can_priv *priv = netdev_priv(netdev); + void *res; + + res = devres_alloc(can_led_release, 0, GFP_KERNEL); + if (!res) { + netdev_err(netdev, "cannot register LED triggers\n"); + return; + } + + snprintf(priv->tx_led_trig_name, sizeof(priv->tx_led_trig_name), + "%s-tx", netdev->name); + snprintf(priv->rx_led_trig_name, sizeof(priv->rx_led_trig_name), + "%s-rx", netdev->name); + + led_trigger_register_simple(priv->tx_led_trig_name, + &priv->tx_led_trig); + led_trigger_register_simple(priv->rx_led_trig_name, + &priv->rx_led_trig); + + devres_add(&netdev->dev, res); +} +EXPORT_SYMBOL_GPL(devm_can_led_init); + +/* NETDEV rename notifier to rename the associated led triggers too */ +static int can_led_notifier(struct notifier_block *nb, unsigned long msg, + void *data) +{ + struct net_device *netdev = data; + struct can_priv *priv = safe_candev_priv(netdev); + char name[CAN_LED_NAME_SZ]; + + if (!priv) + return NOTIFY_DONE; + + if (msg == NETDEV_CHANGENAME) { + snprintf(name, sizeof(name), "%s-tx", netdev->name); + led_trigger_rename_static(name, priv->tx_led_trig); + + snprintf(name, sizeof(name), "%s-rx", netdev->name); + led_trigger_rename_static(name, priv->rx_led_trig); + } + + return NOTIFY_DONE; +} + +/* notifier block for netdevice event */ +static struct notifier_block can_netdev_notifier __read_mostly = { + .notifier_call = can_led_notifier, +}; + +int __init can_led_notifier_init(void) +{ + return register_netdevice_notifier(&can_netdev_notifier); +} + +void __exit can_led_notifier_exit(void) +{ + unregister_netdevice_notifier(&can_netdev_notifier); +} diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c index 5eaf47b8e37b..f32b9fc6a983 100644 --- a/drivers/net/can/mcp251x.c +++ b/drivers/net/can/mcp251x.c @@ -60,6 +60,7 @@ #include <linux/can/core.h> #include <linux/can/dev.h> +#include <linux/can/led.h> #include <linux/can/platform/mcp251x.h> #include <linux/completion.h> #include <linux/delay.h> @@ -494,6 +495,9 @@ static void mcp251x_hw_rx(struct spi_device *spi, int buf_idx) priv->net->stats.rx_packets++; priv->net->stats.rx_bytes += frame->can_dlc; + + can_led_event(priv->net, CAN_LED_EVENT_RX); + netif_rx_ni(skb); } @@ -707,6 +711,8 @@ static int mcp251x_stop(struct net_device *net) mutex_unlock(&priv->mcp_lock); + can_led_event(net, CAN_LED_EVENT_STOP); + return 0; } @@ -905,6 +911,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id) if (intf & CANINTF_TX) { net->stats.tx_packets++; net->stats.tx_bytes += priv->tx_len - 1; + can_led_event(net, CAN_LED_EVENT_TX); if (priv->tx_len) { can_get_echo_skb(net, 0); priv->tx_len = 0; @@ -968,6 +975,9 @@ static int mcp251x_open(struct net_device *net) mcp251x_open_clean(net); goto open_unlock; } + + can_led_event(net, CAN_LED_EVENT_OPEN); + netif_wake_queue(net); open_unlock: @@ -1077,10 +1087,15 @@ static int mcp251x_can_probe(struct spi_device *spi) pdata->transceiver_enable(0); ret = register_candev(net); - if (!ret) { - dev_info(&spi->dev, "probed\n"); - return ret; - } + if (ret) + goto error_probe; + + devm_can_led_init(net); + + dev_info(&spi->dev, "probed\n"); + + return ret; + error_probe: if (!mcp251x_enable_dma) kfree(priv->spi_rx_buf); diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig index d38706958af6..f19be5269e7b 100644 --- a/drivers/net/can/mscan/Kconfig +++ b/drivers/net/can/mscan/Kconfig @@ -1,5 +1,5 @@ config CAN_MSCAN - depends on CAN_DEV && (PPC || M68K) + depends on PPC || M68K tristate "Support for Freescale MSCAN based chips" ---help--- The Motorola Scalable Controller Area Network (MSCAN) definition diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index 92f73c708a3d..b39ca5b3ea7f 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -1,6 +1,6 @@ menuconfig CAN_SJA1000 tristate "Philips/NXP SJA1000 devices" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM if CAN_SJA1000 @@ -99,11 +99,11 @@ config CAN_TSCAN1 tristate "TS-CAN1 PC104 boards" depends on ISA help - This driver is for Technologic Systems' TSCAN-1 PC104 boards. - http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 - The driver supports multiple boards and automatically configures them: - PLD IO base addresses are read from jumpers JP1 and JP2, - IRQ numbers are read from jumpers JP4 and JP5, - SJA1000 IO base addresses are chosen heuristically (first that works). + This driver is for Technologic Systems' TSCAN-1 PC104 boards. + http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 + The driver supports multiple boards and automatically configures them: + PLD IO base addresses are read from jumpers JP1 and JP2, + IRQ numbers are read from jumpers JP4 and JP5, + SJA1000 IO base addresses are chosen heuristically (first that works). endif diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c index 036a326836b2..36d298da2af6 100644 --- a/drivers/net/can/sja1000/ems_pci.c +++ b/drivers/net/can/sja1000/ems_pci.c @@ -238,7 +238,6 @@ static int ems_pci_add_card(struct pci_dev *pdev, /* Allocating card structures to hold addresses, ... */ card = kzalloc(sizeof(struct ems_pci_card), GFP_KERNEL); if (card == NULL) { - dev_err(&pdev->dev, "Unable to allocate memory\n"); pci_disable_device(pdev); return -ENOMEM; } diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index 600ac7226e5c..d1e7f1006ddd 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -450,11 +450,8 @@ static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) } else { /* create the bit banging I2C adapter structure */ card = kzalloc(sizeof(struct peak_pciec_card), GFP_KERNEL); - if (!card) { - dev_err(&pdev->dev, - "failed allocating memory for i2c chip\n"); + if (!card) return -ENOMEM; - } card->cfg_base = chan->cfg_base; card->reg_base = priv->reg_base; diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c index f1175142b0a0..1a7020ba37f5 100644 --- a/drivers/net/can/sja1000/peak_pcmcia.c +++ b/drivers/net/can/sja1000/peak_pcmcia.c @@ -660,7 +660,6 @@ static int pcan_probe(struct pcmcia_device *pdev) card = kzalloc(sizeof(struct pcan_pccard), GFP_KERNEL); if (!card) { - dev_err(&pdev->dev, "couldn't allocate card memory\n"); err = -ENOMEM; goto probe_err_2; } diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index 11d1062a9449..a042cdc260dc 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -508,7 +508,6 @@ static int plx_pci_add_card(struct pci_dev *pdev, /* Allocate card structures to hold addresses, ... */ card = kzalloc(sizeof(*card), GFP_KERNEL); if (!card) { - dev_err(&pdev->dev, "Unable to allocate memory\n"); pci_disable_device(pdev); return -ENOMEM; } diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 83ee11eca0e2..daf4013a8fc7 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -60,6 +60,7 @@ #include <linux/can/dev.h> #include <linux/can/error.h> +#include <linux/can/led.h> #include "sja1000.h" @@ -368,6 +369,8 @@ static void sja1000_rx(struct net_device *dev) stats->rx_packets++; stats->rx_bytes += cf->can_dlc; + + can_led_event(dev, CAN_LED_EVENT_RX); } static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status) @@ -521,6 +524,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) can_get_echo_skb(dev, 0); } netif_wake_queue(dev); + can_led_event(dev, CAN_LED_EVENT_TX); } if (isrc & IRQ_RI) { /* receive interrupt */ @@ -575,6 +579,8 @@ static int sja1000_open(struct net_device *dev) /* init and start chi */ sja1000_start(dev); + can_led_event(dev, CAN_LED_EVENT_OPEN); + netif_start_queue(dev); return 0; @@ -592,6 +598,8 @@ static int sja1000_close(struct net_device *dev) close_candev(dev); + can_led_event(dev, CAN_LED_EVENT_STOP); + return 0; } @@ -639,6 +647,8 @@ static const struct net_device_ops sja1000_netdev_ops = { int register_sja1000dev(struct net_device *dev) { + int ret; + if (!sja1000_probe_chip(dev)) return -ENODEV; @@ -648,7 +658,12 @@ int register_sja1000dev(struct net_device *dev) set_reset_mode(dev); chipset_init(dev); - return register_candev(dev); + ret = register_candev(dev); + + if (!ret) + devm_can_led_init(dev); + + return ret; } EXPORT_SYMBOL_GPL(register_sja1000dev); diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index adc3708d8829..06b7e097d36e 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -55,6 +55,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/can.h> +#include <linux/can/skb.h> static __initconst const char banner[] = KERN_INFO "slcan: serial line CAN interface driver\n"; @@ -184,7 +185,8 @@ static void slc_bump(struct slcan *sl) cf.data[i] |= tmp; } - skb = dev_alloc_skb(sizeof(struct can_frame)); + skb = dev_alloc_skb(sizeof(struct can_frame) + + sizeof(struct can_skb_priv)); if (!skb) return; @@ -192,6 +194,10 @@ static void slc_bump(struct slcan *sl) skb->protocol = htons(ETH_P_CAN); skb->pkt_type = PACKET_BROADCAST; skb->ip_summed = CHECKSUM_UNNECESSARY; + + can_skb_reserve(skb); + can_skb_prv(skb)->ifindex = sl->dev->ifindex; + memcpy(skb_put(skb, sizeof(struct can_frame)), &cf, sizeof(struct can_frame)); netif_rx_ni(skb); diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 5de46a9a77bb..96b6fe158b5b 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -1,6 +1,6 @@ config CAN_SOFTING tristate "Softing Gmbh CAN generic support" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM ---help--- Support for CAN cards from Softing Gmbh & some cards from Vector Gmbh. diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index 300581b24ff3..f21fc37ec578 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -50,6 +50,7 @@ #include <linux/can/dev.h> #include <linux/can/error.h> +#include <linux/can/led.h> #include <linux/can/platform/ti_hecc.h> #define DRV_NAME "ti_hecc" @@ -593,6 +594,7 @@ static int ti_hecc_rx_pkt(struct ti_hecc_priv *priv, int mbxno) spin_unlock_irqrestore(&priv->mbx_lock, flags); stats->rx_bytes += cf->can_dlc; + can_led_event(priv->ndev, CAN_LED_EVENT_RX); netif_receive_skb(skb); stats->rx_packets++; @@ -796,6 +798,7 @@ static irqreturn_t ti_hecc_interrupt(int irq, void *dev_id) stats->tx_bytes += hecc_read_mbx(priv, mbxno, HECC_CANMCF) & 0xF; stats->tx_packets++; + can_led_event(ndev, CAN_LED_EVENT_TX); can_get_echo_skb(ndev, mbxno); --priv->tx_tail; } @@ -851,6 +854,8 @@ static int ti_hecc_open(struct net_device *ndev) return err; } + can_led_event(ndev, CAN_LED_EVENT_OPEN); + ti_hecc_start(ndev); napi_enable(&priv->napi); netif_start_queue(ndev); @@ -869,6 +874,8 @@ static int ti_hecc_close(struct net_device *ndev) close_candev(ndev); ti_hecc_transceiver_switch(priv, 0); + can_led_event(ndev, CAN_LED_EVENT_STOP); + return 0; } @@ -961,6 +968,9 @@ static int ti_hecc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "register_candev() failed\n"); goto probe_exit_clk; } + + devm_can_led_init(ndev); + dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%u)\n", priv->base, (u32) ndev->irq); diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index a4e4bee35710..fc96a3d83ebe 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -1,5 +1,5 @@ menu "CAN USB interfaces" - depends on USB && CAN_DEV + depends on USB config CAN_EMS_USB tristate "EMS CPC-USB/ARM7 CAN/USB interface" @@ -48,4 +48,10 @@ config CAN_PEAK_USB This driver supports the PCAN-USB and PCAN-USB Pro adapters from PEAK-System Technik (http://www.peak-system.com). +config CAN_8DEV_USB + tristate "8 devices USB2CAN interface" + ---help--- + This driver supports the USB2CAN interface + from 8 devices (http://www.8devices.com). + endmenu diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile index 80a2ee41fd61..becef460a91a 100644 --- a/drivers/net/can/usb/Makefile +++ b/drivers/net/can/usb/Makefile @@ -6,5 +6,6 @@ obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/ +obj-$(CONFIG_CAN_8DEV_USB) += usb_8dev.o ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index c69f0b72b352..5f9a7ad9b964 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -1014,17 +1014,13 @@ static int ems_usb_probe(struct usb_interface *intf, } dev->intr_in_buffer = kzalloc(INTR_IN_BUFFER_SIZE, GFP_KERNEL); - if (!dev->intr_in_buffer) { - dev_err(&intf->dev, "Couldn't alloc Intr buffer\n"); + if (!dev->intr_in_buffer) goto cleanup_intr_urb; - } dev->tx_msg_buffer = kzalloc(CPC_HEADER_SIZE + sizeof(struct ems_cpc_msg), GFP_KERNEL); - if (!dev->tx_msg_buffer) { - dev_err(&intf->dev, "Couldn't alloc Tx buffer\n"); + if (!dev->tx_msg_buffer) goto cleanup_intr_in_buffer; - } usb_set_intfdata(intf, dev); diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 5b58a4d87397..45cb9f3c1324 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -561,7 +561,6 @@ static int kvaser_usb_simple_msg_async(struct kvaser_usb_net_priv *priv, buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC); if (!buf) { - netdev_err(netdev, "No memory left for USB buffer\n"); usb_free_urb(urb); return -ENOMEM; } @@ -1268,7 +1267,6 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb, buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC); if (!buf) { - netdev_err(netdev, "No memory left for USB buffer\n"); stats->tx_dropped++; goto nobufmem; } diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index d9290ea788e0..a0f647f92bf5 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -386,7 +386,6 @@ static int peak_usb_start(struct peak_usb_device *dev) buf = kmalloc(dev->adapter->rx_buffer_size, GFP_KERNEL); if (!buf) { - netdev_err(netdev, "No memory left for USB buffer\n"); usb_free_urb(urb); err = -ENOMEM; break; @@ -442,7 +441,6 @@ static int peak_usb_start(struct peak_usb_device *dev) buf = kmalloc(dev->adapter->tx_buffer_size, GFP_KERNEL); if (!buf) { - netdev_err(netdev, "No memory left for USB buffer\n"); usb_free_urb(urb); err = -ENOMEM; break; @@ -634,7 +632,6 @@ static int peak_usb_restart(struct peak_usb_device *dev) /* also allocate enough space for the commands to send */ buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_ATOMIC); if (!buf) { - netdev_err(dev->netdev, "no memory left for async cmd\n"); usb_free_urb(urb); return -ENOMEM; } @@ -729,8 +726,6 @@ static int peak_usb_create_dev(struct peak_usb_adapter *peak_usb_adapter, /* allocate a buffer large enough to send commands */ dev->cmd_buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL); if (!dev->cmd_buf) { - dev_err(&intf->dev, "%s: couldn't alloc cmd buffer\n", - PCAN_USB_DRIVER_NAME); err = -ENOMEM; goto lbl_set_intf_data; } diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c new file mode 100644 index 000000000000..6e15ef08f301 --- /dev/null +++ b/drivers/net/can/usb/usb_8dev.c @@ -0,0 +1,1031 @@ +/* + * CAN driver for "8 devices" USB2CAN converter + * + * Copyright (C) 2012 Bernd Krumboeck (krumboeck@universalnet.at) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published + * by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program. + * + * This driver is inspired by the 3.2.0 version of drivers/net/can/usb/ems_usb.c + * and drivers/net/can/usb/esd_usb2.c + * + * Many thanks to Gerhard Bertelsmann (info@gerhard-bertelsmann.de) + * for testing and fixing this driver. Also many thanks to "8 devices", + * who were very cooperative and answered my questions. + */ + +#include <linux/init.h> +#include <linux/signal.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/usb.h> + +#include <linux/can.h> +#include <linux/can/dev.h> +#include <linux/can/error.h> +#include <linux/can/led.h> + +/* driver constants */ +#define MAX_RX_URBS 20 +#define MAX_TX_URBS 20 +#define RX_BUFFER_SIZE 64 + +/* vendor and product id */ +#define USB_8DEV_VENDOR_ID 0x0483 +#define USB_8DEV_PRODUCT_ID 0x1234 + +/* endpoints */ +enum usb_8dev_endpoint { + USB_8DEV_ENDP_DATA_RX = 1, + USB_8DEV_ENDP_DATA_TX, + USB_8DEV_ENDP_CMD_RX, + USB_8DEV_ENDP_CMD_TX +}; + +/* device CAN clock */ +#define USB_8DEV_ABP_CLOCK 32000000 + +/* setup flags */ +#define USB_8DEV_SILENT 0x01 +#define USB_8DEV_LOOPBACK 0x02 +#define USB_8DEV_DISABLE_AUTO_RESTRANS 0x04 +#define USB_8DEV_STATUS_FRAME 0x08 + +/* commands */ +enum usb_8dev_cmd { + USB_8DEV_RESET = 1, + USB_8DEV_OPEN, + USB_8DEV_CLOSE, + USB_8DEV_SET_SPEED, + USB_8DEV_SET_MASK_FILTER, + USB_8DEV_GET_STATUS, + USB_8DEV_GET_STATISTICS, + USB_8DEV_GET_SERIAL, + USB_8DEV_GET_SOFTW_VER, + USB_8DEV_GET_HARDW_VER, + USB_8DEV_RESET_TIMESTAMP, + USB_8DEV_GET_SOFTW_HARDW_VER +}; + +/* command options */ +#define USB_8DEV_BAUD_MANUAL 0x09 +#define USB_8DEV_CMD_START 0x11 +#define USB_8DEV_CMD_END 0x22 + +#define USB_8DEV_CMD_SUCCESS 0 +#define USB_8DEV_CMD_ERROR 255 + +#define USB_8DEV_CMD_TIMEOUT 1000 + +/* frames */ +#define USB_8DEV_DATA_START 0x55 +#define USB_8DEV_DATA_END 0xAA + +#define USB_8DEV_TYPE_CAN_FRAME 0 +#define USB_8DEV_TYPE_ERROR_FRAME 3 + +#define USB_8DEV_EXTID 0x01 +#define USB_8DEV_RTR 0x02 +#define USB_8DEV_ERR_FLAG 0x04 + +/* status */ +#define USB_8DEV_STATUSMSG_OK 0x00 /* Normal condition. */ +#define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occured when sending */ +#define USB_8DEV_STATUSMSG_BUSLIGHT 0x02 /* Error counter has reached 96 */ +#define USB_8DEV_STATUSMSG_BUSHEAVY 0x03 /* Error count. has reached 128 */ +#define USB_8DEV_STATUSMSG_BUSOFF 0x04 /* Device is in BUSOFF */ +#define USB_8DEV_STATUSMSG_STUFF 0x20 /* Stuff Error */ +#define USB_8DEV_STATUSMSG_FORM 0x21 /* Form Error */ +#define USB_8DEV_STATUSMSG_ACK 0x23 /* Ack Error */ +#define USB_8DEV_STATUSMSG_BIT0 0x24 /* Bit1 Error */ +#define USB_8DEV_STATUSMSG_BIT1 0x25 /* Bit0 Error */ +#define USB_8DEV_STATUSMSG_CRC 0x27 /* CRC Error */ + +#define USB_8DEV_RP_MASK 0x7F /* Mask for Receive Error Bit */ + + +/* table of devices that work with this driver */ +static const struct usb_device_id usb_8dev_table[] = { + { USB_DEVICE(USB_8DEV_VENDOR_ID, USB_8DEV_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usb_8dev_table); + +struct usb_8dev_tx_urb_context { + struct usb_8dev_priv *priv; + + u32 echo_index; + u8 dlc; +}; + +/* Structure to hold all of our device specific stuff */ +struct usb_8dev_priv { + struct can_priv can; /* must be the first member */ + + struct sk_buff *echo_skb[MAX_TX_URBS]; + + struct usb_device *udev; + struct net_device *netdev; + + atomic_t active_tx_urbs; + struct usb_anchor tx_submitted; + struct usb_8dev_tx_urb_context tx_contexts[MAX_TX_URBS]; + + struct usb_anchor rx_submitted; + + struct can_berr_counter bec; + + u8 *cmd_msg_buffer; + + struct mutex usb_8dev_cmd_lock; + +}; + +/* tx frame */ +struct __packed usb_8dev_tx_msg { + u8 begin; + u8 flags; /* RTR and EXT_ID flag */ + __be32 id; /* upper 3 bits not used */ + u8 dlc; /* data length code 0-8 bytes */ + u8 data[8]; /* 64-bit data */ + u8 end; +}; + +/* rx frame */ +struct __packed usb_8dev_rx_msg { + u8 begin; + u8 type; /* frame type */ + u8 flags; /* RTR and EXT_ID flag */ + __be32 id; /* upper 3 bits not used */ + u8 dlc; /* data length code 0-8 bytes */ + u8 data[8]; /* 64-bit data */ + __be32 timestamp; /* 32-bit timestamp */ + u8 end; +}; + +/* command frame */ +struct __packed usb_8dev_cmd_msg { + u8 begin; + u8 channel; /* unkown - always 0 */ + u8 command; /* command to execute */ + u8 opt1; /* optional parameter / return value */ + u8 opt2; /* optional parameter 2 */ + u8 data[10]; /* optional parameter and data */ + u8 end; +}; + +static int usb_8dev_send_cmd_msg(struct usb_8dev_priv *priv, u8 *msg, int size) +{ + int actual_length; + + return usb_bulk_msg(priv->udev, + usb_sndbulkpipe(priv->udev, USB_8DEV_ENDP_CMD_TX), + msg, size, &actual_length, USB_8DEV_CMD_TIMEOUT); +} + +static int usb_8dev_wait_cmd_msg(struct usb_8dev_priv *priv, u8 *msg, int size, + int *actual_length) +{ + return usb_bulk_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, USB_8DEV_ENDP_CMD_RX), + msg, size, actual_length, USB_8DEV_CMD_TIMEOUT); +} + +/* Send command to device and receive result. + * Command was successful when opt1 = 0. + */ +static int usb_8dev_send_cmd(struct usb_8dev_priv *priv, + struct usb_8dev_cmd_msg *out, + struct usb_8dev_cmd_msg *in) +{ + int err; + int num_bytes_read; + struct net_device *netdev; + + netdev = priv->netdev; + + out->begin = USB_8DEV_CMD_START; + out->end = USB_8DEV_CMD_END; + + mutex_lock(&priv->usb_8dev_cmd_lock); + + memcpy(priv->cmd_msg_buffer, out, + sizeof(struct usb_8dev_cmd_msg)); + + err = usb_8dev_send_cmd_msg(priv, priv->cmd_msg_buffer, + sizeof(struct usb_8dev_cmd_msg)); + if (err < 0) { + netdev_err(netdev, "sending command message failed\n"); + goto failed; + } + + err = usb_8dev_wait_cmd_msg(priv, priv->cmd_msg_buffer, + sizeof(struct usb_8dev_cmd_msg), + &num_bytes_read); + if (err < 0) { + netdev_err(netdev, "no command message answer\n"); + goto failed; + } + + memcpy(in, priv->cmd_msg_buffer, sizeof(struct usb_8dev_cmd_msg)); + + if (in->begin != USB_8DEV_CMD_START || in->end != USB_8DEV_CMD_END || + num_bytes_read != 16 || in->opt1 != 0) + err = -EPROTO; + +failed: + mutex_unlock(&priv->usb_8dev_cmd_lock); + return err; +} + +/* Send open command to device */ +static int usb_8dev_cmd_open(struct usb_8dev_priv *priv) +{ + struct can_bittiming *bt = &priv->can.bittiming; + struct usb_8dev_cmd_msg outmsg; + struct usb_8dev_cmd_msg inmsg; + u32 ctrlmode = priv->can.ctrlmode; + u32 flags = USB_8DEV_STATUS_FRAME; + __be32 beflags; + __be16 bebrp; + + memset(&outmsg, 0, sizeof(outmsg)); + outmsg.command = USB_8DEV_OPEN; + outmsg.opt1 = USB_8DEV_BAUD_MANUAL; + outmsg.data[0] = bt->prop_seg + bt->phase_seg1; + outmsg.data[1] = bt->phase_seg2; + outmsg.data[2] = bt->sjw; + + /* BRP */ + bebrp = cpu_to_be16((u16)bt->brp); + memcpy(&outmsg.data[3], &bebrp, sizeof(bebrp)); + + /* flags */ + if (ctrlmode & CAN_CTRLMODE_LOOPBACK) + flags |= USB_8DEV_LOOPBACK; + if (ctrlmode & CAN_CTRLMODE_LISTENONLY) + flags |= USB_8DEV_SILENT; + if (ctrlmode & CAN_CTRLMODE_ONE_SHOT) + flags |= USB_8DEV_DISABLE_AUTO_RESTRANS; + + beflags = cpu_to_be32(flags); + memcpy(&outmsg.data[5], &beflags, sizeof(beflags)); + + return usb_8dev_send_cmd(priv, &outmsg, &inmsg); +} + +/* Send close command to device */ +static int usb_8dev_cmd_close(struct usb_8dev_priv *priv) +{ + struct usb_8dev_cmd_msg inmsg; + struct usb_8dev_cmd_msg outmsg = { + .channel = 0, + .command = USB_8DEV_CLOSE, + .opt1 = 0, + .opt2 = 0 + }; + + return usb_8dev_send_cmd(priv, &outmsg, &inmsg); +} + +/* Get firmware and hardware version */ +static int usb_8dev_cmd_version(struct usb_8dev_priv *priv, u32 *res) +{ + struct usb_8dev_cmd_msg inmsg; + struct usb_8dev_cmd_msg outmsg = { + .channel = 0, + .command = USB_8DEV_GET_SOFTW_HARDW_VER, + .opt1 = 0, + .opt2 = 0 + }; + + int err = usb_8dev_send_cmd(priv, &outmsg, &inmsg); + if (err) + return err; + + *res = be32_to_cpup((__be32 *)inmsg.data); + + return err; +} + +/* Set network device mode + * + * Maybe we should leave this function empty, because the device + * set mode variable with open command. + */ +static int usb_8dev_set_mode(struct net_device *netdev, enum can_mode mode) +{ + struct usb_8dev_priv *priv = netdev_priv(netdev); + int err = 0; + + switch (mode) { + case CAN_MODE_START: + err = usb_8dev_cmd_open(priv); + if (err) + netdev_warn(netdev, "couldn't start device"); + break; + + default: + return -EOPNOTSUPP; + } + + return err; +} + +/* Read error/status frames */ +static void usb_8dev_rx_err_msg(struct usb_8dev_priv *priv, + struct usb_8dev_rx_msg *msg) +{ + struct can_frame *cf; + struct sk_buff *skb; + struct net_device_stats *stats = &priv->netdev->stats; + + /* Error message: + * byte 0: Status + * byte 1: bit 7: Receive Passive + * byte 1: bit 0-6: Receive Error Counter + * byte 2: Transmit Error Counter + * byte 3: Always 0 (maybe reserved for future use) + */ + + u8 state = msg->data[0]; + u8 rxerr = msg->data[1] & USB_8DEV_RP_MASK; + u8 txerr = msg->data[2]; + int rx_errors = 0; + int tx_errors = 0; + + skb = alloc_can_err_skb(priv->netdev, &cf); + if (!skb) + return; + + switch (state) { + case USB_8DEV_STATUSMSG_OK: + priv->can.state = CAN_STATE_ERROR_ACTIVE; + cf->can_id |= CAN_ERR_PROT; + cf->data[2] = CAN_ERR_PROT_ACTIVE; + break; + case USB_8DEV_STATUSMSG_BUSOFF: + priv->can.state = CAN_STATE_BUS_OFF; + cf->can_id |= CAN_ERR_BUSOFF; + can_bus_off(priv->netdev); + break; + case USB_8DEV_STATUSMSG_OVERRUN: + case USB_8DEV_STATUSMSG_BUSLIGHT: + case USB_8DEV_STATUSMSG_BUSHEAVY: + cf->can_id |= CAN_ERR_CRTL; + break; + default: + priv->can.state = CAN_STATE_ERROR_WARNING; + cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; + priv->can.can_stats.bus_error++; + break; + } + + switch (state) { + case USB_8DEV_STATUSMSG_OK: + case USB_8DEV_STATUSMSG_BUSOFF: + break; + case USB_8DEV_STATUSMSG_ACK: + cf->can_id |= CAN_ERR_ACK; + tx_errors = 1; + break; + case USB_8DEV_STATUSMSG_CRC: + cf->data[2] |= CAN_ERR_PROT_UNSPEC; + cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ | + CAN_ERR_PROT_LOC_CRC_DEL; + rx_errors = 1; + break; + case USB_8DEV_STATUSMSG_BIT0: + cf->data[2] |= CAN_ERR_PROT_BIT0; + tx_errors = 1; + break; + case USB_8DEV_STATUSMSG_BIT1: + cf->data[2] |= CAN_ERR_PROT_BIT1; + tx_errors = 1; + break; + case USB_8DEV_STATUSMSG_FORM: + cf->data[2] |= CAN_ERR_PROT_FORM; + rx_errors = 1; + break; + case USB_8DEV_STATUSMSG_STUFF: + cf->data[2] |= CAN_ERR_PROT_STUFF; + rx_errors = 1; + break; + case USB_8DEV_STATUSMSG_OVERRUN: + cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; + stats->rx_over_errors++; + rx_errors = 1; + break; + case USB_8DEV_STATUSMSG_BUSLIGHT: + priv->can.state = CAN_STATE_ERROR_WARNING; + cf->data[1] = (txerr > rxerr) ? + CAN_ERR_CRTL_TX_WARNING : + CAN_ERR_CRTL_RX_WARNING; + priv->can.can_stats.error_warning++; + break; + case USB_8DEV_STATUSMSG_BUSHEAVY: + priv->can.state = CAN_STATE_ERROR_PASSIVE; + cf->data[1] = (txerr > rxerr) ? + CAN_ERR_CRTL_TX_PASSIVE : + CAN_ERR_CRTL_RX_PASSIVE; + priv->can.can_stats.error_passive++; + break; + default: + netdev_warn(priv->netdev, + "Unknown status/error message (%d)\n", state); + break; + } + + if (tx_errors) { + cf->data[2] |= CAN_ERR_PROT_TX; + stats->tx_errors++; + } + + if (rx_errors) + stats->rx_errors++; + + cf->data[6] = txerr; + cf->data[7] = rxerr; + + priv->bec.txerr = txerr; + priv->bec.rxerr = rxerr; + + netif_rx(skb); + + stats->rx_packets++; + stats->rx_bytes += cf->can_dlc; +} + +/* Read data and status frames */ +static void usb_8dev_rx_can_msg(struct usb_8dev_priv *priv, + struct usb_8dev_rx_msg *msg) +{ + struct can_frame *cf; + struct sk_buff *skb; + struct net_device_stats *stats = &priv->netdev->stats; + + if (msg->type == USB_8DEV_TYPE_ERROR_FRAME && + msg->flags == USB_8DEV_ERR_FLAG) { + usb_8dev_rx_err_msg(priv, msg); + } else if (msg->type == USB_8DEV_TYPE_CAN_FRAME) { + skb = alloc_can_skb(priv->netdev, &cf); + if (!skb) + return; + + cf->can_id = be32_to_cpu(msg->id); + cf->can_dlc = get_can_dlc(msg->dlc & 0xF); + + if (msg->flags & USB_8DEV_EXTID) + cf->can_id |= CAN_EFF_FLAG; + + if (msg->flags & USB_8DEV_RTR) + cf->can_id |= CAN_RTR_FLAG; + else + memcpy(cf->data, msg->data, cf->can_dlc); + + netif_rx(skb); + + stats->rx_packets++; + stats->rx_bytes += cf->can_dlc; + + can_led_event(priv->netdev, CAN_LED_EVENT_RX); + } else { + netdev_warn(priv->netdev, "frame type %d unknown", + msg->type); + } + +} + +/* Callback for reading data from device + * + * Check urb status, call read function and resubmit urb read operation. + */ +static void usb_8dev_read_bulk_callback(struct urb *urb) +{ + struct usb_8dev_priv *priv = urb->context; + struct net_device *netdev; + int retval; + int pos = 0; + + netdev = priv->netdev; + + if (!netif_device_present(netdev)) + return; + + switch (urb->status) { + case 0: /* success */ + break; + + case -ENOENT: + case -ESHUTDOWN: + return; + + default: + netdev_info(netdev, "Rx URB aborted (%d)\n", + urb->status); + goto resubmit_urb; + } + + while (pos < urb->actual_length) { + struct usb_8dev_rx_msg *msg; + + if (pos + sizeof(struct usb_8dev_rx_msg) > urb->actual_length) { + netdev_err(priv->netdev, "format error\n"); + break; + } + + msg = (struct usb_8dev_rx_msg *)(urb->transfer_buffer + pos); + usb_8dev_rx_can_msg(priv, msg); + + pos += sizeof(struct usb_8dev_rx_msg); + } + +resubmit_urb: + usb_fill_bulk_urb(urb, priv->udev, + usb_rcvbulkpipe(priv->udev, USB_8DEV_ENDP_DATA_RX), + urb->transfer_buffer, RX_BUFFER_SIZE, + usb_8dev_read_bulk_callback, priv); + + retval = usb_submit_urb(urb, GFP_ATOMIC); + + if (retval == -ENODEV) + netif_device_detach(netdev); + else if (retval) + netdev_err(netdev, + "failed resubmitting read bulk urb: %d\n", retval); +} + +/* Callback handler for write operations + * + * Free allocated buffers, check transmit status and + * calculate statistic. + */ +static void usb_8dev_write_bulk_callback(struct urb *urb) +{ + struct usb_8dev_tx_urb_context *context = urb->context; + struct usb_8dev_priv *priv; + struct net_device *netdev; + + BUG_ON(!context); + + priv = context->priv; + netdev = priv->netdev; + + /* free up our allocated buffer */ + usb_free_coherent(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); + + atomic_dec(&priv->active_tx_urbs); + + if (!netif_device_present(netdev)) + return; + + if (urb->status) + netdev_info(netdev, "Tx URB aborted (%d)\n", + urb->status); + + netdev->stats.tx_packets++; + netdev->stats.tx_bytes += context->dlc; + + can_get_echo_skb(netdev, context->echo_index); + + can_led_event(netdev, CAN_LED_EVENT_TX); + + /* Release context */ + context->echo_index = MAX_TX_URBS; + + netif_wake_queue(netdev); +} + +/* Send data to device */ +static netdev_tx_t usb_8dev_start_xmit(struct sk_buff *skb, + struct net_device *netdev) +{ + struct usb_8dev_priv *priv = netdev_priv(netdev); + struct net_device_stats *stats = &netdev->stats; + struct can_frame *cf = (struct can_frame *) skb->data; + struct usb_8dev_tx_msg *msg; + struct urb *urb; + struct usb_8dev_tx_urb_context *context = NULL; + u8 *buf; + int i, err; + size_t size = sizeof(struct usb_8dev_tx_msg); + + if (can_dropped_invalid_skb(netdev, skb)) + return NETDEV_TX_OK; + + /* create a URB, and a buffer for it, and copy the data to the URB */ + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + netdev_err(netdev, "No memory left for URBs\n"); + goto nomem; + } + + buf = usb_alloc_coherent(priv->udev, size, GFP_ATOMIC, + &urb->transfer_dma); + if (!buf) { + netdev_err(netdev, "No memory left for USB buffer\n"); + goto nomembuf; + } + + memset(buf, 0, size); + + msg = (struct usb_8dev_tx_msg *)buf; + msg->begin = USB_8DEV_DATA_START; + msg->flags = 0x00; + + if (cf->can_id & CAN_RTR_FLAG) + msg->flags |= USB_8DEV_RTR; + + if (cf->can_id & CAN_EFF_FLAG) + msg->flags |= USB_8DEV_EXTID; + + msg->id = cpu_to_be32(cf->can_id & CAN_ERR_MASK); + msg->dlc = cf->can_dlc; + memcpy(msg->data, cf->data, cf->can_dlc); + msg->end = USB_8DEV_DATA_END; + + for (i = 0; i < MAX_TX_URBS; i++) { + if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) { + context = &priv->tx_contexts[i]; + break; + } + } + + /* May never happen! When this happens we'd more URBs in flight as + * allowed (MAX_TX_URBS). + */ + if (!context) + goto nofreecontext; + + context->priv = priv; + context->echo_index = i; + context->dlc = cf->can_dlc; + + usb_fill_bulk_urb(urb, priv->udev, + usb_sndbulkpipe(priv->udev, USB_8DEV_ENDP_DATA_TX), + buf, size, usb_8dev_write_bulk_callback, context); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + usb_anchor_urb(urb, &priv->tx_submitted); + + can_put_echo_skb(skb, netdev, context->echo_index); + + atomic_inc(&priv->active_tx_urbs); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (unlikely(err)) + goto failed; + else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS) + /* Slow down tx path */ + netif_stop_queue(netdev); + + /* Release our reference to this URB, the USB core will eventually free + * it entirely. + */ + usb_free_urb(urb); + + return NETDEV_TX_OK; + +nofreecontext: + usb_unanchor_urb(urb); + usb_free_coherent(priv->udev, size, buf, urb->transfer_dma); + + netdev_warn(netdev, "couldn't find free context"); + + return NETDEV_TX_BUSY; + +failed: + can_free_echo_skb(netdev, context->echo_index); + + usb_unanchor_urb(urb); + usb_free_coherent(priv->udev, size, buf, urb->transfer_dma); + + atomic_dec(&priv->active_tx_urbs); + + if (err == -ENODEV) + netif_device_detach(netdev); + else + netdev_warn(netdev, "failed tx_urb %d\n", err); + +nomembuf: + usb_free_urb(urb); + +nomem: + dev_kfree_skb(skb); + stats->tx_dropped++; + + return NETDEV_TX_OK; +} + +static int usb_8dev_get_berr_counter(const struct net_device *netdev, + struct can_berr_counter *bec) +{ + struct usb_8dev_priv *priv = netdev_priv(netdev); + + bec->txerr = priv->bec.txerr; + bec->rxerr = priv->bec.rxerr; + + return 0; +} + +/* Start USB device */ +static int usb_8dev_start(struct usb_8dev_priv *priv) +{ + struct net_device *netdev = priv->netdev; + int err, i; + + for (i = 0; i < MAX_RX_URBS; i++) { + struct urb *urb = NULL; + u8 *buf; + + /* create a URB, and a buffer for it */ + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + netdev_err(netdev, "No memory left for URBs\n"); + err = -ENOMEM; + break; + } + + buf = usb_alloc_coherent(priv->udev, RX_BUFFER_SIZE, GFP_KERNEL, + &urb->transfer_dma); + if (!buf) { + netdev_err(netdev, "No memory left for USB buffer\n"); + usb_free_urb(urb); + err = -ENOMEM; + break; + } + + usb_fill_bulk_urb(urb, priv->udev, + usb_rcvbulkpipe(priv->udev, + USB_8DEV_ENDP_DATA_RX), + buf, RX_BUFFER_SIZE, + usb_8dev_read_bulk_callback, priv); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + usb_anchor_urb(urb, &priv->rx_submitted); + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + usb_unanchor_urb(urb); + usb_free_coherent(priv->udev, RX_BUFFER_SIZE, buf, + urb->transfer_dma); + break; + } + + /* Drop reference, USB core will take care of freeing it */ + usb_free_urb(urb); + } + + /* Did we submit any URBs */ + if (i == 0) { + netdev_warn(netdev, "couldn't setup read URBs\n"); + return err; + } + + /* Warn if we've couldn't transmit all the URBs */ + if (i < MAX_RX_URBS) + netdev_warn(netdev, "rx performance may be slow\n"); + + err = usb_8dev_cmd_open(priv); + if (err) + goto failed; + + priv->can.state = CAN_STATE_ERROR_ACTIVE; + + return 0; + +failed: + if (err == -ENODEV) + netif_device_detach(priv->netdev); + + netdev_warn(netdev, "couldn't submit control: %d\n", err); + + return err; +} + +/* Open USB device */ +static int usb_8dev_open(struct net_device *netdev) +{ + struct usb_8dev_priv *priv = netdev_priv(netdev); + int err; + + /* common open */ + err = open_candev(netdev); + if (err) + return err; + + can_led_event(netdev, CAN_LED_EVENT_OPEN); + + /* finally start device */ + err = usb_8dev_start(priv); + if (err) { + if (err == -ENODEV) + netif_device_detach(priv->netdev); + + netdev_warn(netdev, "couldn't start device: %d\n", + err); + + close_candev(netdev); + + return err; + } + + netif_start_queue(netdev); + + return 0; +} + +static void unlink_all_urbs(struct usb_8dev_priv *priv) +{ + int i; + + usb_kill_anchored_urbs(&priv->rx_submitted); + + usb_kill_anchored_urbs(&priv->tx_submitted); + atomic_set(&priv->active_tx_urbs, 0); + + for (i = 0; i < MAX_TX_URBS; i++) + priv->tx_contexts[i].echo_index = MAX_TX_URBS; +} + +/* Close USB device */ +static int usb_8dev_close(struct net_device *netdev) +{ + struct usb_8dev_priv *priv = netdev_priv(netdev); + int err = 0; + + /* Send CLOSE command to CAN controller */ + err = usb_8dev_cmd_close(priv); + if (err) + netdev_warn(netdev, "couldn't stop device"); + + priv->can.state = CAN_STATE_STOPPED; + + netif_stop_queue(netdev); + + /* Stop polling */ + unlink_all_urbs(priv); + + close_candev(netdev); + + can_led_event(netdev, CAN_LED_EVENT_STOP); + + return err; +} + +static const struct net_device_ops usb_8dev_netdev_ops = { + .ndo_open = usb_8dev_open, + .ndo_stop = usb_8dev_close, + .ndo_start_xmit = usb_8dev_start_xmit, +}; + +static const struct can_bittiming_const usb_8dev_bittiming_const = { + .name = "usb_8dev", + .tseg1_min = 1, + .tseg1_max = 16, + .tseg2_min = 1, + .tseg2_max = 8, + .sjw_max = 4, + .brp_min = 1, + .brp_max = 1024, + .brp_inc = 1, +}; + +/* Probe USB device + * + * Check device and firmware. + * Set supported modes and bittiming constants. + * Allocate some memory. + */ +static int usb_8dev_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct net_device *netdev; + struct usb_8dev_priv *priv; + int i, err = -ENOMEM; + u32 version; + char buf[18]; + struct usb_device *usbdev = interface_to_usbdev(intf); + + /* product id looks strange, better we also check iProduct string */ + if (usb_string(usbdev, usbdev->descriptor.iProduct, buf, + sizeof(buf)) > 0 && strcmp(buf, "USB2CAN converter")) { + dev_info(&usbdev->dev, "ignoring: not an USB2CAN converter\n"); + return -ENODEV; + } + + netdev = alloc_candev(sizeof(struct usb_8dev_priv), MAX_TX_URBS); + if (!netdev) { + dev_err(&intf->dev, "Couldn't alloc candev\n"); + return -ENOMEM; + } + + priv = netdev_priv(netdev); + + priv->udev = usbdev; + priv->netdev = netdev; + + priv->can.state = CAN_STATE_STOPPED; + priv->can.clock.freq = USB_8DEV_ABP_CLOCK; + priv->can.bittiming_const = &usb_8dev_bittiming_const; + priv->can.do_set_mode = usb_8dev_set_mode; + priv->can.do_get_berr_counter = usb_8dev_get_berr_counter; + priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | + CAN_CTRLMODE_LISTENONLY | + CAN_CTRLMODE_ONE_SHOT; + + netdev->netdev_ops = &usb_8dev_netdev_ops; + + netdev->flags |= IFF_ECHO; /* we support local echo */ + + init_usb_anchor(&priv->rx_submitted); + + init_usb_anchor(&priv->tx_submitted); + atomic_set(&priv->active_tx_urbs, 0); + + for (i = 0; i < MAX_TX_URBS; i++) + priv->tx_contexts[i].echo_index = MAX_TX_URBS; + + priv->cmd_msg_buffer = kzalloc(sizeof(struct usb_8dev_cmd_msg), + GFP_KERNEL); + if (!priv->cmd_msg_buffer) + goto cleanup_candev; + + usb_set_intfdata(intf, priv); + + SET_NETDEV_DEV(netdev, &intf->dev); + + mutex_init(&priv->usb_8dev_cmd_lock); + + err = register_candev(netdev); + if (err) { + netdev_err(netdev, + "couldn't register CAN device: %d\n", err); + goto cleanup_cmd_msg_buffer; + } + + err = usb_8dev_cmd_version(priv, &version); + if (err) { + netdev_err(netdev, "can't get firmware version\n"); + goto cleanup_cmd_msg_buffer; + } else { + netdev_info(netdev, + "firmware: %d.%d, hardware: %d.%d\n", + (version>>24) & 0xff, (version>>16) & 0xff, + (version>>8) & 0xff, version & 0xff); + } + + devm_can_led_init(netdev); + + return 0; + +cleanup_cmd_msg_buffer: + kfree(priv->cmd_msg_buffer); + +cleanup_candev: + free_candev(netdev); + + return err; + +} + +/* Called by the usb core when driver is unloaded or device is removed */ +static void usb_8dev_disconnect(struct usb_interface *intf) +{ + struct usb_8dev_priv *priv = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + + if (priv) { + netdev_info(priv->netdev, "device disconnected\n"); + + unregister_netdev(priv->netdev); + free_candev(priv->netdev); + + unlink_all_urbs(priv); + } + +} + +static struct usb_driver usb_8dev_driver = { + .name = "usb_8dev", + .probe = usb_8dev_probe, + .disconnect = usb_8dev_disconnect, + .id_table = usb_8dev_table, +}; + +module_usb_driver(usb_8dev_driver); + +MODULE_AUTHOR("Bernd Krumboeck <krumboeck@universalnet.at>"); +MODULE_DESCRIPTION("CAN driver for 8 devices USB2CAN interfaces"); +MODULE_LICENSE("GPL v2"); |