1 files changed, 1 insertions, 47 deletions

diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index 5a295533ff20..69b35d124de5 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -36,52 +36,6 @@ static char *mv88e6171_probe(struct device *host_dev, int sw_addr)
 	return NULL;
 }
 
-static int mv88e6171_switch_reset(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
-	int i;
-	int ret;
-	unsigned long timeout;
-
-	/* Set all ports to the disabled state. */
-	for (i = 0; i < ps->num_ports; i++) {
-		ret = REG_READ(REG_PORT(i), 0x04);
-		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
-	}
-
-	/* Wait for transmit queues to drain. */
-	usleep_range(2000, 4000);
-
-	/* Reset the switch. Keep PPU active.  The PPU needs to be
-	 * active to support indirect phy register accesses through
-	 * global registers 0x18 and 0x19.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
-
-	/* Wait up to one second for reset to complete. */
-	timeout = jiffies + 1 * HZ;
-	while (time_before(jiffies, timeout)) {
-		ret = REG_READ(REG_GLOBAL, 0x00);
-		if ((ret & 0xc800) == 0xc800)
-			break;
-
-		usleep_range(1000, 2000);
-	}
-	if (time_after(jiffies, timeout))
-		return -ETIMEDOUT;
-
-	/* Enable ports not under DSA, e.g. WAN port */
-	for (i = 0; i < ps->num_ports; i++) {
-		if (dsa_is_cpu_port(ds, i) || ds->phys_port_mask & (1 << i))
-			continue;
-
-		ret = REG_READ(REG_PORT(i), 0x04);
-		REG_WRITE(REG_PORT(i), 0x04, ret | 0x03);
-	}
-
-	return 0;
-}
-
 static int mv88e6171_setup_global(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
@@ -282,7 +236,7 @@ static int mv88e6171_setup(struct dsa_switch *ds)
 
 	ps->num_ports = 7;
 
-	ret = mv88e6171_switch_reset(ds);
+	ret = mv88e6xxx_switch_reset(ds, true);
 	if (ret < 0)
 		return ret;