diff options
Diffstat (limited to 'drivers/net/e1000/e1000_ethtool.c')
| -rw-r--r-- | drivers/net/e1000/e1000_ethtool.c | 474 |
1 files changed, 272 insertions, 202 deletions
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index c88f1a3c1b1d..5cedc81786e3 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -80,6 +80,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "tx_deferred_ok", E1000_STAT(stats.dc) }, { "tx_single_coll_ok", E1000_STAT(stats.scc) }, { "tx_multi_coll_ok", E1000_STAT(stats.mcc) }, + { "tx_timeout_count", E1000_STAT(tx_timeout_count) }, { "rx_long_length_errors", E1000_STAT(stats.roc) }, { "rx_short_length_errors", E1000_STAT(stats.ruc) }, { "rx_align_errors", E1000_STAT(stats.algnerrc) }, @@ -93,9 +94,20 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "rx_csum_offload_good", E1000_STAT(hw_csum_good) }, { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }, { "rx_header_split", E1000_STAT(rx_hdr_split) }, + { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) }, }; -#define E1000_STATS_LEN \ + +#ifdef CONFIG_E1000_MQ +#define E1000_QUEUE_STATS_LEN \ + (((struct e1000_adapter *)netdev->priv)->num_tx_queues + \ + ((struct e1000_adapter *)netdev->priv)->num_rx_queues) \ + * (sizeof(struct e1000_queue_stats) / sizeof(uint64_t)) +#else +#define E1000_QUEUE_STATS_LEN 0 +#endif +#define E1000_GLOBAL_STATS_LEN \ sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats) +#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN) static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = { "Register test (offline)", "Eeprom test (offline)", "Interrupt test (offline)", "Loopback test (offline)", @@ -109,7 +121,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - if(hw->media_type == e1000_media_type_copper) { + if (hw->media_type == e1000_media_type_copper) { ecmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | @@ -121,7 +133,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->advertising = ADVERTISED_TP; - if(hw->autoneg == 1) { + if (hw->autoneg == 1) { ecmd->advertising |= ADVERTISED_Autoneg; /* the e1000 autoneg seems to match ethtool nicely */ @@ -132,7 +144,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->port = PORT_TP; ecmd->phy_address = hw->phy_addr; - if(hw->mac_type == e1000_82543) + if (hw->mac_type == e1000_82543) ecmd->transceiver = XCVR_EXTERNAL; else ecmd->transceiver = XCVR_INTERNAL; @@ -148,13 +160,13 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->port = PORT_FIBRE; - if(hw->mac_type >= e1000_82545) + if (hw->mac_type >= e1000_82545) ecmd->transceiver = XCVR_INTERNAL; else ecmd->transceiver = XCVR_EXTERNAL; } - if(netif_carrier_ok(adapter->netdev)) { + if (netif_carrier_ok(adapter->netdev)) { e1000_get_speed_and_duplex(hw, &adapter->link_speed, &adapter->link_duplex); @@ -163,7 +175,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) /* unfortunatly FULL_DUPLEX != DUPLEX_FULL * and HALF_DUPLEX != DUPLEX_HALF */ - if(adapter->link_duplex == FULL_DUPLEX) + if (adapter->link_duplex == FULL_DUPLEX) ecmd->duplex = DUPLEX_FULL; else ecmd->duplex = DUPLEX_HALF; @@ -183,13 +195,21 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - if(ecmd->autoneg == AUTONEG_ENABLE) { + /* When SoL/IDER sessions are active, autoneg/speed/duplex + * cannot be changed */ + if (e1000_check_phy_reset_block(hw)) { + DPRINTK(DRV, ERR, "Cannot change link characteristics " + "when SoL/IDER is active.\n"); + return -EINVAL; + } + + if (ecmd->autoneg == AUTONEG_ENABLE) { hw->autoneg = 1; - if(hw->media_type == e1000_media_type_fiber) + if (hw->media_type == e1000_media_type_fiber) hw->autoneg_advertised = ADVERTISED_1000baseT_Full | ADVERTISED_FIBRE | ADVERTISED_Autoneg; - else + else hw->autoneg_advertised = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Half | @@ -199,12 +219,12 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ADVERTISED_TP; ecmd->advertising = hw->autoneg_advertised; } else - if(e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) + if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) return -EINVAL; /* reset the link */ - if(netif_running(adapter->netdev)) { + if (netif_running(adapter->netdev)) { e1000_down(adapter); e1000_reset(adapter); e1000_up(adapter); @@ -221,14 +241,14 @@ e1000_get_pauseparam(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - pause->autoneg = + pause->autoneg = (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); - - if(hw->fc == e1000_fc_rx_pause) + + if (hw->fc == e1000_fc_rx_pause) pause->rx_pause = 1; - else if(hw->fc == e1000_fc_tx_pause) + else if (hw->fc == e1000_fc_tx_pause) pause->tx_pause = 1; - else if(hw->fc == e1000_fc_full) { + else if (hw->fc == e1000_fc_full) { pause->rx_pause = 1; pause->tx_pause = 1; } @@ -240,31 +260,30 @@ e1000_set_pauseparam(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - + adapter->fc_autoneg = pause->autoneg; - if(pause->rx_pause && pause->tx_pause) + if (pause->rx_pause && pause->tx_pause) hw->fc = e1000_fc_full; - else if(pause->rx_pause && !pause->tx_pause) + else if (pause->rx_pause && !pause->tx_pause) hw->fc = e1000_fc_rx_pause; - else if(!pause->rx_pause && pause->tx_pause) + else if (!pause->rx_pause && pause->tx_pause) hw->fc = e1000_fc_tx_pause; - else if(!pause->rx_pause && !pause->tx_pause) + else if (!pause->rx_pause && !pause->tx_pause) hw->fc = e1000_fc_none; hw->original_fc = hw->fc; - if(adapter->fc_autoneg == AUTONEG_ENABLE) { - if(netif_running(adapter->netdev)) { + if (adapter->fc_autoneg == AUTONEG_ENABLE) { + if (netif_running(adapter->netdev)) { e1000_down(adapter); e1000_up(adapter); } else e1000_reset(adapter); - } - else + } else return ((hw->media_type == e1000_media_type_fiber) ? e1000_setup_link(hw) : e1000_force_mac_fc(hw)); - + return 0; } @@ -281,14 +300,14 @@ e1000_set_rx_csum(struct net_device *netdev, uint32_t data) struct e1000_adapter *adapter = netdev_priv(netdev); adapter->rx_csum = data; - if(netif_running(netdev)) { + if (netif_running(netdev)) { e1000_down(adapter); e1000_up(adapter); } else e1000_reset(adapter); return 0; } - + static uint32_t e1000_get_tx_csum(struct net_device *netdev) { @@ -300,7 +319,7 @@ e1000_set_tx_csum(struct net_device *netdev, uint32_t data) { struct e1000_adapter *adapter = netdev_priv(netdev); - if(adapter->hw.mac_type < e1000_82543) { + if (adapter->hw.mac_type < e1000_82543) { if (!data) return -EINVAL; return 0; @@ -319,8 +338,8 @@ static int e1000_set_tso(struct net_device *netdev, uint32_t data) { struct e1000_adapter *adapter = netdev_priv(netdev); - if((adapter->hw.mac_type < e1000_82544) || - (adapter->hw.mac_type == e1000_82547)) + if ((adapter->hw.mac_type < e1000_82544) || + (adapter->hw.mac_type == e1000_82547)) return data ? -EINVAL : 0; if (data) @@ -328,7 +347,7 @@ e1000_set_tso(struct net_device *netdev, uint32_t data) else netdev->features &= ~NETIF_F_TSO; return 0; -} +} #endif /* NETIF_F_TSO */ static uint32_t @@ -345,7 +364,7 @@ e1000_set_msglevel(struct net_device *netdev, uint32_t data) adapter->msg_enable = data; } -static int +static int e1000_get_regs_len(struct net_device *netdev) { #define E1000_REGS_LEN 32 @@ -381,7 +400,7 @@ e1000_get_regs(struct net_device *netdev, regs_buff[11] = E1000_READ_REG(hw, TIDV); regs_buff[12] = adapter->hw.phy_type; /* PHY type (IGP=1, M88=0) */ - if(hw->phy_type == e1000_phy_igp) { + if (hw->phy_type == e1000_phy_igp) { e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, IGP01E1000_PHY_AGC_A); e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A & @@ -435,7 +454,7 @@ e1000_get_regs(struct net_device *netdev, e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); regs_buff[24] = (uint32_t)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ - if(hw->mac_type >= e1000_82540 && + if (hw->mac_type >= e1000_82540 && hw->media_type == e1000_media_type_copper) { regs_buff[26] = E1000_READ_REG(hw, MANC); } @@ -459,7 +478,7 @@ e1000_get_eeprom(struct net_device *netdev, int ret_val = 0; uint16_t i; - if(eeprom->len == 0) + if (eeprom->len == 0) return -EINVAL; eeprom->magic = hw->vendor_id | (hw->device_id << 16); @@ -469,16 +488,16 @@ e1000_get_eeprom(struct net_device *netdev, eeprom_buff = kmalloc(sizeof(uint16_t) * (last_word - first_word + 1), GFP_KERNEL); - if(!eeprom_buff) + if (!eeprom_buff) return -ENOMEM; - if(hw->eeprom.type == e1000_eeprom_spi) + if (hw->eeprom.type == e1000_eeprom_spi) ret_val = e1000_read_eeprom(hw, first_word, last_word - first_word + 1, eeprom_buff); else { for (i = 0; i < last_word - first_word + 1; i++) - if((ret_val = e1000_read_eeprom(hw, first_word + i, 1, + if ((ret_val = e1000_read_eeprom(hw, first_word + i, 1, &eeprom_buff[i]))) break; } @@ -505,10 +524,10 @@ e1000_set_eeprom(struct net_device *netdev, int max_len, first_word, last_word, ret_val = 0; uint16_t i; - if(eeprom->len == 0) + if (eeprom->len == 0) return -EOPNOTSUPP; - if(eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) return -EFAULT; max_len = hw->eeprom.word_size * 2; @@ -516,19 +535,19 @@ e1000_set_eeprom(struct net_device *netdev, first_word = eeprom->offset >> 1; last_word = (eeprom->offset + eeprom->len - 1) >> 1; eeprom_buff = kmalloc(max_len, GFP_KERNEL); - if(!eeprom_buff) + if (!eeprom_buff) return -ENOMEM; ptr = (void *)eeprom_buff; - if(eeprom->offset & 1) { + if (eeprom->offset & 1) { /* need read/modify/write of first changed EEPROM word */ /* only the second byte of the word is being modified */ ret_val = e1000_read_eeprom(hw, first_word, 1, &eeprom_buff[0]); ptr++; } - if(((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { + if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { /* need read/modify/write of last changed EEPROM word */ /* only the first byte of the word is being modified */ ret_val = e1000_read_eeprom(hw, last_word, 1, @@ -547,9 +566,9 @@ e1000_set_eeprom(struct net_device *netdev, ret_val = e1000_write_eeprom(hw, first_word, last_word - first_word + 1, eeprom_buff); - /* Update the checksum over the first part of the EEPROM if needed + /* Update the checksum over the first part of the EEPROM if needed * and flush shadow RAM for 82573 conrollers */ - if((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) || + if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) || (hw->mac_type == e1000_82573))) e1000_update_eeprom_checksum(hw); @@ -567,21 +586,21 @@ e1000_get_drvinfo(struct net_device *netdev, strncpy(drvinfo->driver, e1000_driver_name, 32); strncpy(drvinfo->version, e1000_driver_version, 32); - - /* EEPROM image version # is reported as firware version # for + + /* EEPROM image version # is reported as firmware version # for * 8257{1|2|3} controllers */ e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data); switch (adapter->hw.mac_type) { case e1000_82571: case e1000_82572: case e1000_82573: - sprintf(firmware_version, "%d.%d-%d", + sprintf(firmware_version, "%d.%d-%d", (eeprom_data & 0xF000) >> 12, (eeprom_data & 0x0FF0) >> 4, eeprom_data & 0x000F); break; default: - sprintf(firmware_version, "n/a"); + sprintf(firmware_version, "N/A"); } strncpy(drvinfo->fw_version, firmware_version, 32); @@ -613,7 +632,7 @@ e1000_get_ringparam(struct net_device *netdev, ring->rx_jumbo_pending = 0; } -static int +static int e1000_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) { @@ -623,8 +642,8 @@ e1000_set_ringparam(struct net_device *netdev, struct e1000_rx_ring *rxdr, *rx_old, *rx_new; int i, err, tx_ring_size, rx_ring_size; - tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_queues; - rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_queues; + tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues; + rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues; if (netif_running(adapter->netdev)) e1000_down(adapter); @@ -650,25 +669,25 @@ e1000_set_ringparam(struct net_device *netdev, txdr = adapter->tx_ring; rxdr = adapter->rx_ring; - if((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) return -EINVAL; rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD); rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD)); - E1000_ROUNDUP(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE); + E1000_ROUNDUP(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE); txdr->count = max(ring->tx_pending,(uint32_t)E1000_MIN_TXD); txdr->count = min(txdr->count,(uint32_t)(mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD)); - E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); + E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); - for (i = 0; i < adapter->num_queues; i++) { + for (i = 0; i < adapter->num_tx_queues; i++) txdr[i].count = txdr->count; + for (i = 0; i < adapter->num_rx_queues; i++) rxdr[i].count = rxdr->count; - } - if(netif_running(adapter->netdev)) { + if (netif_running(adapter->netdev)) { /* Try to get new resources before deleting old */ if ((err = e1000_setup_all_rx_resources(adapter))) goto err_setup_rx; @@ -688,7 +707,7 @@ e1000_set_ringparam(struct net_device *netdev, kfree(rx_old); adapter->rx_ring = rx_new; adapter->tx_ring = tx_new; - if((err = e1000_up(adapter))) + if ((err = e1000_up(adapter))) return err; } @@ -707,10 +726,10 @@ err_setup_rx: uint32_t pat, value; \ uint32_t test[] = \ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \ - for(pat = 0; pat < sizeof(test)/sizeof(test[0]); pat++) { \ + for (pat = 0; pat < sizeof(test)/sizeof(test[0]); pat++) { \ E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W)); \ value = E1000_READ_REG(&adapter->hw, R); \ - if(value != (test[pat] & W & M)) { \ + if (value != (test[pat] & W & M)) { \ DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \ "0x%08X expected 0x%08X\n", \ E1000_##R, value, (test[pat] & W & M)); \ @@ -726,7 +745,7 @@ err_setup_rx: uint32_t value; \ E1000_WRITE_REG(&adapter->hw, R, W & M); \ value = E1000_READ_REG(&adapter->hw, R); \ - if((W & M) != (value & M)) { \ + if ((W & M) != (value & M)) { \ DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\ "expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \ *data = (adapter->hw.mac_type < e1000_82543) ? \ @@ -762,7 +781,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) value = (E1000_READ_REG(&adapter->hw, STATUS) & toggle); E1000_WRITE_REG(&adapter->hw, STATUS, toggle); after = E1000_READ_REG(&adapter->hw, STATUS) & toggle; - if(value != after) { + if (value != after) { DPRINTK(DRV, ERR, "failed STATUS register test got: " "0x%08X expected: 0x%08X\n", after, value); *data = 1; @@ -790,7 +809,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0x003FFFFB); REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); - if(adapter->hw.mac_type >= e1000_82543) { + if (adapter->hw.mac_type >= e1000_82543) { REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); @@ -798,7 +817,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); - for(i = 0; i < E1000_RAR_ENTRIES; i++) { + for (i = 0; i < E1000_RAR_ENTRIES; i++) { REG_PATTERN_TEST(RA + ((i << 1) << 2), 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, @@ -814,7 +833,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) } - for(i = 0; i < E1000_MC_TBL_SIZE; i++) + for (i = 0; i < E1000_MC_TBL_SIZE; i++) REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF); *data = 0; @@ -830,8 +849,8 @@ e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data) *data = 0; /* Read and add up the contents of the EEPROM */ - for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { - if((e1000_read_eeprom(&adapter->hw, i, 1, &temp)) < 0) { + for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { + if ((e1000_read_eeprom(&adapter->hw, i, 1, &temp)) < 0) { *data = 1; break; } @@ -839,7 +858,7 @@ e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data) } /* If Checksum is not Correct return error else test passed */ - if((checksum != (uint16_t) EEPROM_SUM) && !(*data)) + if ((checksum != (uint16_t) EEPROM_SUM) && !(*data)) *data = 2; return *data; @@ -868,9 +887,9 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) *data = 0; /* Hook up test interrupt handler just for this test */ - if(!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) { + if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) { shared_int = FALSE; - } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ, + } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ, netdev->name, netdev)){ *data = 1; return -1; @@ -881,12 +900,12 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) msec_delay(10); /* Test each interrupt */ - for(; i < 10; i++) { + for (; i < 10; i++) { /* Interrupt to test */ mask = 1 << i; - if(!shared_int) { + if (!shared_int) { /* Disable the interrupt to be reported in * the cause register and then force the same * interrupt and see if one gets posted. If @@ -897,8 +916,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) E1000_WRITE_REG(&adapter->hw, IMC, mask); E1000_WRITE_REG(&adapter->hw, ICS, mask); msec_delay(10); - - if(adapter->test_icr & mask) { + + if (adapter->test_icr & mask) { *data = 3; break; } @@ -915,12 +934,12 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) E1000_WRITE_REG(&adapter->hw, ICS, mask); msec_delay(10); - if(!(adapter->test_icr & mask)) { + if (!(adapter->test_icr & mask)) { *data = 4; break; } - if(!shared_int) { + if (!shared_int) { /* Disable the other interrupts to be reported in * the cause register and then force the other * interrupts and see if any get posted. If @@ -932,7 +951,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF); msec_delay(10); - if(adapter->test_icr) { + if (adapter->test_icr) { *data = 5; break; } @@ -957,40 +976,39 @@ e1000_free_desc_rings(struct e1000_adapter *adapter) struct pci_dev *pdev = adapter->pdev; int i; - if(txdr->desc && txdr->buffer_info) { - for(i = 0; i < txdr->count; i++) { - if(txdr->buffer_info[i].dma) + if (txdr->desc && txdr->buffer_info) { + for (i = 0; i < txdr->count; i++) { + if (txdr->buffer_info[i].dma) pci_unmap_single(pdev, txdr->buffer_info[i].dma, txdr->buffer_info[i].length, PCI_DMA_TODEVICE); - if(txdr->buffer_info[i].skb) + if (txdr->buffer_info[i].skb) dev_kfree_skb(txdr->buffer_info[i].skb); } } - if(rxdr->desc && rxdr->buffer_info) { - for(i = 0; i < rxdr->count; i++) { - if(rxdr->buffer_info[i].dma) + if (rxdr->desc && rxdr->buffer_info) { + for (i = 0; i < rxdr->count; i++) { + if (rxdr->buffer_info[i].dma) pci_unmap_single(pdev, rxdr->buffer_info[i].dma, rxdr->buffer_info[i].length, PCI_DMA_FROMDEVICE); - if(rxdr->buffer_info[i].skb) + if (rxdr->buffer_info[i].skb) dev_kfree_skb(rxdr->buffer_info[i].skb); } } - if(txdr->desc) { + if (txdr->desc) { pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma); txdr->desc = NULL; } - if(rxdr->desc) { + if (rxdr->desc) { pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma); rxdr->desc = NULL; } kfree(txdr->buffer_info); txdr->buffer_info = NULL; - kfree(rxdr->buffer_info); rxdr->buffer_info = NULL; @@ -1008,11 +1026,11 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) /* Setup Tx descriptor ring and Tx buffers */ - if(!txdr->count) - txdr->count = E1000_DEFAULT_TXD; + if (!txdr->count) + txdr->count = E1000_DEFAULT_TXD; size = txdr->count * sizeof(struct e1000_buffer); - if(!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) { + if (!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) { ret_val = 1; goto err_nomem; } @@ -1020,7 +1038,7 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) txdr->size = txdr->count * sizeof(struct e1000_tx_desc); E1000_ROUNDUP(txdr->size, 4096); - if(!(txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma))) { + if (!(txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma))) { ret_val = 2; goto err_nomem; } @@ -1039,12 +1057,12 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT | E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT); - for(i = 0; i < txdr->count; i++) { + for (i = 0; i < txdr->count; i++) { struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i); struct sk_buff *skb; unsigned int size = 1024; - if(!(skb = alloc_skb(size, GFP_KERNEL))) { + if (!(skb = alloc_skb(size, GFP_KERNEL))) { ret_val = 3; goto err_nomem; } @@ -1064,18 +1082,18 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) /* Setup Rx descriptor ring and Rx buffers */ - if(!rxdr->count) - rxdr->count = E1000_DEFAULT_RXD; + if (!rxdr->count) + rxdr->count = E1000_DEFAULT_RXD; size = rxdr->count * sizeof(struct e1000_buffer); - if(!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) { + if (!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) { ret_val = 4; goto err_nomem; } memset(rxdr->buffer_info, 0, size); rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc); - if(!(rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma))) { + if (!(rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma))) { ret_val = 5; goto err_nomem; } @@ -1095,11 +1113,11 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT); E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - for(i = 0; i < rxdr->count; i++) { + for (i = 0; i < rxdr->count; i++) { struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i); struct sk_buff *skb; - if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, + if (!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL))) { ret_val = 6; goto err_nomem; @@ -1208,15 +1226,15 @@ e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter) /* Check Phy Configuration */ e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg); - if(phy_reg != 0x4100) + if (phy_reg != 0x4100) return 9; e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg); - if(phy_reg != 0x0070) + if (phy_reg != 0x0070) return 10; e1000_read_phy_reg(&adapter->hw, 29, &phy_reg); - if(phy_reg != 0x001A) + if (phy_reg != 0x001A) return 11; return 0; @@ -1230,7 +1248,7 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) adapter->hw.autoneg = FALSE; - if(adapter->hw.phy_type == e1000_phy_m88) { + if (adapter->hw.phy_type == e1000_phy_m88) { /* Auto-MDI/MDIX Off */ e1000_write_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, 0x0808); @@ -1250,14 +1268,14 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ E1000_CTRL_FD); /* Force Duplex to FULL */ - if(adapter->hw.media_type == e1000_media_type_copper && + if (adapter->hw.media_type == e1000_media_type_copper && adapter->hw.phy_type == e1000_phy_m88) { ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ } else { /* Set the ILOS bit on the fiber Nic is half * duplex link is detected. */ stat_reg = E1000_READ_REG(&adapter->hw, STATUS); - if((stat_reg & E1000_STATUS_FD) == 0) + if ((stat_reg & E1000_STATUS_FD) == 0) ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); } @@ -1266,7 +1284,7 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) /* Disable the receiver on the PHY so when a cable is plugged in, the * PHY does not begin to autoneg when a cable is reconnected to the NIC. */ - if(adapter->hw.phy_type == e1000_phy_m88) + if (adapter->hw.phy_type == e1000_phy_m88) e1000_phy_disable_receiver(adapter); udelay(500); @@ -1282,14 +1300,14 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter) switch (adapter->hw.mac_type) { case e1000_82543: - if(adapter->hw.media_type == e1000_media_type_copper) { + if (adapter->hw.media_type == e1000_media_type_copper) { /* Attempt to setup Loopback mode on Non-integrated PHY. * Some PHY registers get corrupted at random, so * attempt this 10 times. */ - while(e1000_nonintegrated_phy_loopback(adapter) && + while (e1000_nonintegrated_phy_loopback(adapter) && count++ < 10); - if(count < 11) + if (count < 11) return 0; } break; @@ -1327,11 +1345,11 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter) static int e1000_setup_loopback_test(struct e1000_adapter *adapter) { - uint32_t rctl; struct e1000_hw *hw = &adapter->hw; + uint32_t rctl; if (hw->media_type == e1000_media_type_fiber || - hw->media_type == e1000_media_type_internal_serdes) { + hw->media_type == e1000_media_type_internal_serdes) { switch (hw->mac_type) { case e1000_82545: case e1000_82546: @@ -1362,25 +1380,25 @@ e1000_setup_loopback_test(struct e1000_adapter *adapter) static void e1000_loopback_cleanup(struct e1000_adapter *adapter) { + struct e1000_hw *hw = &adapter->hw; uint32_t rctl; uint16_t phy_reg; - struct e1000_hw *hw = &adapter->hw; - rctl = E1000_READ_REG(&adapter->hw, RCTL); + rctl = E1000_READ_REG(hw, RCTL); rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + E1000_WRITE_REG(hw, RCTL, rctl); switch (hw->mac_type) { case e1000_82571: case e1000_82572: if (hw->media_type == e1000_media_type_fiber || - hw->media_type == e1000_media_type_internal_serdes){ + hw->media_type == e1000_media_type_internal_serdes) { #define E1000_SERDES_LB_OFF 0x400 E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF); msec_delay(10); break; } - /* fall thru for Cu adapters */ + /* Fall Through */ case e1000_82545: case e1000_82546: case e1000_82545_rev_3: @@ -1401,7 +1419,7 @@ static void e1000_create_lbtest_frame(struct sk_buff *skb, unsigned int frame_size) { memset(skb->data, 0xFF, frame_size); - frame_size = (frame_size % 2) ? (frame_size - 1) : frame_size; + frame_size &= ~1; memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1); memset(&skb->data[frame_size / 2 + 10], 0xBE, 1); memset(&skb->data[frame_size / 2 + 12], 0xAF, 1); @@ -1410,9 +1428,9 @@ e1000_create_lbtest_frame(struct sk_buff *skb, unsigned int frame_size) static int e1000_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size) { - frame_size = (frame_size % 2) ? (frame_size - 1) : frame_size; - if(*(skb->data + 3) == 0xFF) { - if((*(skb->data + frame_size / 2 + 10) == 0xBE) && + frame_size &= ~1; + if (*(skb->data + 3) == 0xFF) { + if ((*(skb->data + frame_size / 2 + 10) == 0xBE) && (*(skb->data + frame_size / 2 + 12) == 0xAF)) { return 0; } @@ -1431,53 +1449,53 @@ e1000_run_loopback_test(struct e1000_adapter *adapter) E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1); - /* Calculate the loop count based on the largest descriptor ring + /* Calculate the loop count based on the largest descriptor ring * The idea is to wrap the largest ring a number of times using 64 * send/receive pairs during each loop */ - if(rxdr->count <= txdr->count) + if (rxdr->count <= txdr->count) lc = ((txdr->count / 64) * 2) + 1; else lc = ((rxdr->count / 64) * 2) + 1; k = l = 0; - for(j = 0; j <= lc; j++) { /* loop count loop */ - for(i = 0; i < 64; i++) { /* send the packets */ - e1000_create_lbtest_frame(txdr->buffer_info[i].skb, + for (j = 0; j <= lc; j++) { /* loop count loop */ + for (i = 0; i < 64; i++) { /* send the packets */ + e1000_create_lbtest_frame(txdr->buffer_info[i].skb, 1024); - pci_dma_sync_single_for_device(pdev, + pci_dma_sync_single_for_device(pdev, txdr->buffer_info[k].dma, txdr->buffer_info[k].length, PCI_DMA_TODEVICE); - if(unlikely(++k == txdr->count)) k = 0; + if (unlikely(++k == txdr->count)) k = 0; } E1000_WRITE_REG(&adapter->hw, TDT, k); msec_delay(200); time = jiffies; /* set the start time for the receive */ good_cnt = 0; do { /* receive the sent packets */ - pci_dma_sync_single_for_cpu(pdev, + pci_dma_sync_single_for_cpu(pdev, rxdr->buffer_info[l].dma, rxdr->buffer_info[l].length, PCI_DMA_FROMDEVICE); - + ret_val = e1000_check_lbtest_frame( rxdr->buffer_info[l].skb, 1024); - if(!ret_val) + if (!ret_val) good_cnt++; - if(unlikely(++l == rxdr->count)) l = 0; - /* time + 20 msecs (200 msecs on 2.4) is more than - * enough time to complete the receives, if it's + if (unlikely(++l == rxdr->count)) l = 0; + /* time + 20 msecs (200 msecs on 2.4) is more than + * enough time to complete the receives, if it's * exceeded, break and error off */ } while (good_cnt < 64 && jiffies < (time + 20)); - if(good_cnt != 64) { + if (good_cnt != 64) { ret_val = 13; /* ret_val is the same as mis-compare */ - break; + break; } - if(jiffies >= (time + 2)) { + if (jiffies >= (time + 2)) { ret_val = 14; /* error code for time out error */ break; } @@ -1488,14 +1506,25 @@ e1000_run_loopback_test(struct e1000_adapter *adapter) static int e1000_loopback_test(struct e1000_adapter *adapter, uint64_t *data) { - if((*data = e1000_setup_desc_rings(adapter))) goto err_loopback; - if((*data = e1000_setup_loopback_test(adapter))) - goto err_loopback_setup; + /* PHY loopback cannot be performed if SoL/IDER + * sessions are active */ + if (e1000_check_phy_reset_block(&adapter->hw)) { + DPRINTK(DRV, ERR, "Cannot do PHY loopback test " + "when SoL/IDER is active.\n"); + *data = 0; + goto out; + } + + if ((*data = e1000_setup_desc_rings(adapter))) + goto out; + if ((*data = e1000_setup_loopback_test(adapter))) + goto err_loopback; *data = e1000_run_loopback_test(adapter); e1000_loopback_cleanup(adapter); -err_loopback_setup: - e1000_free_desc_rings(adapter); + err_loopback: + e1000_free_desc_rings(adapter); +out: return *data; } @@ -1519,17 +1548,17 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) *data = 1; } else { e1000_check_for_link(&adapter->hw); - if(adapter->hw.autoneg) /* if auto_neg is set wait for it */ + if (adapter->hw.autoneg) /* if auto_neg is set wait for it */ msec_delay(4000); - if(!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) { + if (!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) { *data = 1; } } return *data; } -static int +static int e1000_diag_test_count(struct net_device *netdev) { return E1000_TEST_LEN; @@ -1542,7 +1571,7 @@ e1000_diag_test(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); boolean_t if_running = netif_running(netdev); - if(eth_test->flags == ETH_TEST_FL_OFFLINE) { + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { /* Offline tests */ /* save speed, duplex, autoneg settings */ @@ -1552,27 +1581,27 @@ e1000_diag_test(struct net_device *netdev, /* Link test performed before hardware reset so autoneg doesn't * interfere with test result */ - if(e1000_link_test(adapter, &data[4])) + if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; - if(if_running) + if (if_running) e1000_down(adapter); else e1000_reset(adapter); - if(e1000_reg_test(adapter, &data[0])) + if (e1000_reg_test(adapter, &data[0])) eth_test->flags |= ETH_TEST_FL_FAILED; e1000_reset(adapter); - if(e1000_eeprom_test(adapter, &data[1])) + if (e1000_eeprom_test(adapter, &data[1])) eth_test->flags |= ETH_TEST_FL_FAILED; e1000_reset(adapter); - if(e1000_intr_test(adapter, &data[2])) + if (e1000_intr_test(adapter, &data[2])) eth_test->flags |= ETH_TEST_FL_FAILED; e1000_reset(adapter); - if(e1000_loopback_test(adapter, &data[3])) + if (e1000_loopback_test(adapter, &data[3])) eth_test->flags |= ETH_TEST_FL_FAILED; /* restore speed, duplex, autoneg settings */ @@ -1581,11 +1610,11 @@ e1000_diag_test(struct net_device *netdev, adapter->hw.autoneg = autoneg; e1000_reset(adapter); - if(if_running) + if (if_running) e1000_up(adapter); } else { /* Online tests */ - if(e1000_link_test(adapter, &data[4])) + if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; /* Offline tests aren't run; pass by default */ @@ -1603,7 +1632,7 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - switch(adapter->hw.device_id) { + switch (adapter->hw.device_id) { case E1000_DEV_ID_82542: case E1000_DEV_ID_82543GC_FIBER: case E1000_DEV_ID_82543GC_COPPER: @@ -1617,8 +1646,9 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: + case E1000_DEV_ID_82571EB_FIBER: /* Wake events only supported on port A for dual fiber */ - if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) { + if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) { wol->supported = 0; wol->wolopts = 0; return; @@ -1630,13 +1660,13 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) WAKE_BCAST | WAKE_MAGIC; wol->wolopts = 0; - if(adapter->wol & E1000_WUFC_EX) + if (adapter->wol & E1000_WUFC_EX) wol->wolopts |= WAKE_UCAST; - if(adapter->wol & E1000_WUFC_MC) + if (adapter->wol & E1000_WUFC_MC) wol->wolopts |= WAKE_MCAST; - if(adapter->wol & E1000_WUFC_BC) + if (adapter->wol & E1000_WUFC_BC) wol->wolopts |= WAKE_BCAST; - if(adapter->wol & E1000_WUFC_MAG) + if (adapter->wol & E1000_WUFC_MAG) wol->wolopts |= WAKE_MAGIC; return; } @@ -1648,7 +1678,7 @@ e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - switch(adapter->hw.device_id) { + switch (adapter->hw.device_id) { case E1000_DEV_ID_82542: case E1000_DEV_ID_82543GC_FIBER: case E1000_DEV_ID_82543GC_COPPER: @@ -1660,24 +1690,25 @@ e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: + case E1000_DEV_ID_82571EB_FIBER: /* Wake events only supported on port A for dual fiber */ - if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) + if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) return wol->wolopts ? -EOPNOTSUPP : 0; /* Fall Through */ default: - if(wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; adapter->wol = 0; - if(wol->wolopts & WAKE_UCAST) + if (wol->wolopts & WAKE_UCAST) adapter->wol |= E1000_WUFC_EX; - if(wol->wolopts & WAKE_MCAST) + if (wol->wolopts & WAKE_MCAST) adapter->wol |= E1000_WUFC_MC; - if(wol->wolopts & WAKE_BCAST) + if (wol->wolopts & WAKE_BCAST) adapter->wol |= E1000_WUFC_BC; - if(wol->wolopts & WAKE_MAGIC) + if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; } @@ -1695,7 +1726,7 @@ e1000_led_blink_callback(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; - if(test_and_change_bit(E1000_LED_ON, &adapter->led_status)) + if (test_and_change_bit(E1000_LED_ON, &adapter->led_status)) e1000_led_off(&adapter->hw); else e1000_led_on(&adapter->hw); @@ -1708,11 +1739,11 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) { struct e1000_adapter *adapter = netdev_priv(netdev); - if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) + if (!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ); - if(adapter->hw.mac_type < e1000_82571) { - if(!adapter->blink_timer.function) { + if (adapter->hw.mac_type < e1000_82571) { + if (!adapter->blink_timer.function) { init_timer(&adapter->blink_timer); adapter->blink_timer.function = e1000_led_blink_callback; adapter->blink_timer.data = (unsigned long) adapter; @@ -1721,21 +1752,21 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) mod_timer(&adapter->blink_timer, jiffies); msleep_interruptible(data * 1000); del_timer_sync(&adapter->blink_timer); - } - else if(adapter->hw.mac_type < e1000_82573) { - E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | - E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK | - (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | - (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) | - (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT))); + } else if (adapter->hw.mac_type < e1000_82573) { + E1000_WRITE_REG(&adapter->hw, LEDCTL, + (E1000_LEDCTL_LED2_BLINK_RATE | + E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT))); msleep_interruptible(data * 1000); - } - else { - E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | - E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK | - (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | - (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) | - (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT))); + } else { + E1000_WRITE_REG(&adapter->hw, LEDCTL, + (E1000_LEDCTL_LED2_BLINK_RATE | + E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT))); msleep_interruptible(data * 1000); } @@ -1750,50 +1781,89 @@ static int e1000_nway_reset(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); - if(netif_running(netdev)) { + if (netif_running(netdev)) { e1000_down(adapter); e1000_up(adapter); } return 0; } -static int +static int e1000_get_stats_count(struct net_device *netdev) { return E1000_STATS_LEN; } -static void -e1000_get_ethtool_stats(struct net_device *netdev, +static void +e1000_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, uint64_t *data) { struct e1000_adapter *adapter = netdev_priv(netdev); +#ifdef CONFIG_E1000_MQ + uint64_t *queue_stat; + int stat_count = sizeof(struct e1000_queue_stats) / sizeof(uint64_t); + int j, k; +#endif int i; e1000_update_stats(adapter); - for(i = 0; i < E1000_STATS_LEN; i++) { - char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset; - data[i] = (e1000_gstrings_stats[i].sizeof_stat == + for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { + char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset; + data[i] = (e1000_gstrings_stats[i].sizeof_stat == sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p; } +#ifdef CONFIG_E1000_MQ + for (j = 0; j < adapter->num_tx_queues; j++) { + queue_stat = (uint64_t *)&adapter->tx_ring[j].tx_stats; + for (k = 0; k < stat_count; k++) + data[i + k] = queue_stat[k]; + i += k; + } + for (j = 0; j < adapter->num_rx_queues; j++) { + queue_stat = (uint64_t *)&adapter->rx_ring[j].rx_stats; + for (k = 0; k < stat_count; k++) + data[i + k] = queue_stat[k]; + i += k; + } +#endif +/* BUG_ON(i != E1000_STATS_LEN); */ } -static void +static void e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data) { +#ifdef CONFIG_E1000_MQ + struct e1000_adapter *adapter = netdev_priv(netdev); +#endif + uint8_t *p = data; int i; - switch(stringset) { + switch (stringset) { case ETH_SS_TEST: - memcpy(data, *e1000_gstrings_test, + memcpy(data, *e1000_gstrings_test, E1000_TEST_LEN*ETH_GSTRING_LEN); break; case ETH_SS_STATS: - for (i=0; i < E1000_STATS_LEN; i++) { - memcpy(data + i * ETH_GSTRING_LEN, - e1000_gstrings_stats[i].stat_string, - ETH_GSTRING_LEN); + for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { + memcpy(p, e1000_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; } +#ifdef CONFIG_E1000_MQ + for (i = 0; i < adapter->num_tx_queues; i++) { + sprintf(p, "tx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + sprintf(p, "rx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } +#endif +/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */ break; } } |