diff options
Diffstat (limited to 'drivers/net/e1000e/82571.c')
-rw-r--r-- | drivers/net/e1000e/82571.c | 273 |
1 files changed, 251 insertions, 22 deletions
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 0890162953e9..6c01a2072c87 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -40,6 +40,7 @@ * 82573E Gigabit Ethernet Controller (Copper) * 82573L Gigabit Ethernet Controller * 82574L Gigabit Network Connection + * 82583V Gigabit Network Connection */ #include <linux/netdevice.h> @@ -61,6 +62,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); +static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw); static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); @@ -99,6 +101,7 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) phy->type = e1000_phy_m88; break; case e1000_82574: + case e1000_82583: phy->type = e1000_phy_bm; break; default: @@ -121,6 +124,7 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) return -E1000_ERR_PHY; break; case e1000_82574: + case e1000_82583: if (phy->id != BME1000_E_PHY_ID_R2) return -E1000_ERR_PHY; break; @@ -164,6 +168,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82573: case e1000_82574: + case e1000_82583: if (((eecd >> 15) & 0x3) == 0x3) { nvm->type = e1000_nvm_flash_hw; nvm->word_size = 2048; @@ -250,7 +255,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) case e1000_media_type_internal_serdes: func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571; - func->check_for_link = e1000e_check_for_serdes_link; + func->check_for_link = e1000_check_for_serdes_link_82571; func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes; break; @@ -261,6 +266,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) switch (hw->mac.type) { case e1000_82574: + case e1000_82583: func->check_mng_mode = e1000_check_mng_mode_82574; func->led_on = e1000_led_on_82574; break; @@ -374,6 +380,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) return e1000e_get_phy_id(hw); break; case e1000_82574: + case e1000_82583: ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); if (ret_val) return ret_val; @@ -463,8 +470,15 @@ static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw) if (ret_val) return ret_val; - if (hw->mac.type != e1000_82573 && hw->mac.type != e1000_82574) + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + break; + default: ret_val = e1000e_acquire_nvm(hw); + break; + } if (ret_val) e1000_put_hw_semaphore_82571(hw); @@ -504,6 +518,7 @@ static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, switch (hw->mac.type) { case e1000_82573: case e1000_82574: + case e1000_82583: ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data); break; case e1000_82571: @@ -778,7 +793,10 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) * Must acquire the MDIO ownership before MAC reset. * Ownership defaults to firmware after a reset. */ - if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; @@ -794,6 +812,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) msleep(2); i++; } while (i < MDIO_OWNERSHIP_TIMEOUT); + break; + default: + break; } ctrl = er32(CTRL); @@ -819,8 +840,16 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) * Need to wait for Phy configuration completion before accessing * NVM and Phy. */ - if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) + + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: msleep(25); + break; + default: + break; + } /* Clear any pending interrupt events. */ ew32(IMC, 0xffffffff); @@ -830,6 +859,10 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) hw->dev_spec.e82571.alt_mac_addr_is_present) e1000e_set_laa_state_82571(hw, true); + /* Reinitialize the 82571 serdes link state machine */ + if (hw->phy.media_type == e1000_media_type_internal_serdes) + hw->mac.serdes_link_state = e1000_serdes_link_down; + return 0; } @@ -886,17 +919,22 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) ew32(TXDCTL(0), reg_data); /* ...for both queues. */ - if (mac->type != e1000_82573 && mac->type != e1000_82574) { + switch (mac->type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + e1000e_enable_tx_pkt_filtering(hw); + reg_data = er32(GCR); + reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; + ew32(GCR, reg_data); + break; + default: reg_data = er32(TXDCTL(1)); reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC; ew32(TXDCTL(1), reg_data); - } else { - e1000e_enable_tx_pkt_filtering(hw); - reg_data = er32(GCR); - reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; - ew32(GCR, reg_data); + break; } /* @@ -961,18 +999,30 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) } /* Device Control */ - if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: reg = er32(CTRL); reg &= ~(1 << 29); ew32(CTRL, reg); + break; + default: + break; } /* Extended Device Control */ - if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: reg = er32(CTRL_EXT); reg &= ~(1 << 23); reg |= (1 << 22); ew32(CTRL_EXT, reg); + break; + default: + break; } if (hw->mac.type == e1000_82571) { @@ -980,9 +1030,23 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) reg |= E1000_PBA_ECC_CORR_EN; ew32(PBA_ECC, reg); } + /* + * Workaround for hardware errata. + * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572 + */ + + if ((hw->mac.type == e1000_82571) || + (hw->mac.type == e1000_82572)) { + reg = er32(CTRL_EXT); + reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN; + ew32(CTRL_EXT, reg); + } + /* PCI-Ex Control Registers */ - if (hw->mac.type == e1000_82574) { + switch (hw->mac.type) { + case e1000_82574: + case e1000_82583: reg = er32(GCR); reg |= (1 << 22); ew32(GCR, reg); @@ -990,6 +1054,9 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) reg = er32(GCR2); reg |= 1; ew32(GCR2, reg); + break; + default: + break; } return; @@ -1009,7 +1076,10 @@ void e1000e_clear_vfta(struct e1000_hw *hw) u32 vfta_offset = 0; u32 vfta_bit_in_reg = 0; - if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: if (hw->mng_cookie.vlan_id != 0) { /* * The VFTA is a 4096b bit-field, each identifying @@ -1024,6 +1094,9 @@ void e1000e_clear_vfta(struct e1000_hw *hw) vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & E1000_VFTA_ENTRY_BIT_SHIFT_MASK); } + break; + default: + break; } for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { /* @@ -1122,9 +1195,16 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw) * the default flow control setting, so we explicitly * set it to full. */ - if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) && - hw->fc.requested_mode == e1000_fc_default) - hw->fc.requested_mode = e1000_fc_full; + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + if (hw->fc.requested_mode == e1000_fc_default) + hw->fc.requested_mode = e1000_fc_full; + break; + default: + break; + } return e1000e_setup_link(hw); } @@ -1203,6 +1283,131 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) } /** + * e1000_check_for_serdes_link_82571 - Check for link (Serdes) + * @hw: pointer to the HW structure + * + * Checks for link up on the hardware. If link is not up and we have + * a signal, then we need to force link up. + **/ +static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 rxcw; + u32 ctrl; + u32 status; + s32 ret_val = 0; + + ctrl = er32(CTRL); + status = er32(STATUS); + rxcw = er32(RXCW); + + if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { + + /* Receiver is synchronized with no invalid bits. */ + switch (mac->serdes_link_state) { + case e1000_serdes_link_autoneg_complete: + if (!(status & E1000_STATUS_LU)) { + /* + * We have lost link, retry autoneg before + * reporting link failure + */ + mac->serdes_link_state = + e1000_serdes_link_autoneg_progress; + hw_dbg(hw, "AN_UP -> AN_PROG\n"); + } + break; + + case e1000_serdes_link_forced_up: + /* + * If we are receiving /C/ ordered sets, re-enable + * auto-negotiation in the TXCW register and disable + * forced link in the Device Control register in an + * attempt to auto-negotiate with our link partner. + */ + if (rxcw & E1000_RXCW_C) { + /* Enable autoneg, and unforce link up */ + ew32(TXCW, mac->txcw); + ew32(CTRL, + (ctrl & ~E1000_CTRL_SLU)); + mac->serdes_link_state = + e1000_serdes_link_autoneg_progress; + hw_dbg(hw, "FORCED_UP -> AN_PROG\n"); + } + break; + + case e1000_serdes_link_autoneg_progress: + /* + * If the LU bit is set in the STATUS register, + * autoneg has completed sucessfully. If not, + * try foring the link because the far end may be + * available but not capable of autonegotiation. + */ + if (status & E1000_STATUS_LU) { + mac->serdes_link_state = + e1000_serdes_link_autoneg_complete; + hw_dbg(hw, "AN_PROG -> AN_UP\n"); + } else { + /* + * Disable autoneg, force link up and + * full duplex, and change state to forced + */ + ew32(TXCW, + (mac->txcw & ~E1000_TXCW_ANE)); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + ew32(CTRL, ctrl); + + /* Configure Flow Control after link up. */ + ret_val = + e1000e_config_fc_after_link_up(hw); + if (ret_val) { + hw_dbg(hw, "Error config flow control\n"); + break; + } + mac->serdes_link_state = + e1000_serdes_link_forced_up; + hw_dbg(hw, "AN_PROG -> FORCED_UP\n"); + } + mac->serdes_has_link = true; + break; + + case e1000_serdes_link_down: + default: + /* The link was down but the receiver has now gained + * valid sync, so lets see if we can bring the link + * up. */ + ew32(TXCW, mac->txcw); + ew32(CTRL, + (ctrl & ~E1000_CTRL_SLU)); + mac->serdes_link_state = + e1000_serdes_link_autoneg_progress; + hw_dbg(hw, "DOWN -> AN_PROG\n"); + break; + } + } else { + if (!(rxcw & E1000_RXCW_SYNCH)) { + mac->serdes_has_link = false; + mac->serdes_link_state = e1000_serdes_link_down; + hw_dbg(hw, "ANYSTATE -> DOWN\n"); + } else { + /* + * We have sync, and can tolerate one + * invalid (IV) codeword before declaring + * link down, so reread to look again + */ + udelay(10); + rxcw = er32(RXCW); + if (rxcw & E1000_RXCW_IV) { + mac->serdes_link_state = e1000_serdes_link_down; + mac->serdes_has_link = false; + hw_dbg(hw, "ANYSTATE -> DOWN\n"); + } + } + } + + return ret_val; +} + +/** * e1000_valid_led_default_82571 - Verify a valid default LED config * @hw: pointer to the HW structure * @data: pointer to the NVM (EEPROM) @@ -1220,11 +1425,19 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) return ret_val; } - if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) && - *data == ID_LED_RESERVED_F746) - *data = ID_LED_DEFAULT_82573; - else if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) - *data = ID_LED_DEFAULT; + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + if (*data == ID_LED_RESERVED_F746) + *data = ID_LED_DEFAULT_82573; + break; + default: + if (*data == ID_LED_RESERVED_0000 || + *data == ID_LED_RESERVED_FFFF) + *data = ID_LED_DEFAULT; + break; + } return 0; } @@ -1517,3 +1730,19 @@ struct e1000_info e1000_82574_info = { .nvm_ops = &e82571_nvm_ops, }; +struct e1000_info e1000_82583_info = { + .mac = e1000_82583, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_RX_CSUM_ENABLED + | FLAG_HAS_SMART_POWER_DOWN + | FLAG_HAS_AMT + | FLAG_HAS_CTRLEXT_ON_LOAD, + .pba = 20, + .get_variants = e1000_get_variants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_bm, + .nvm_ops = &e82571_nvm_ops, +}; + |