summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e/netdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
-rw-r--r--drivers/net/e1000e/netdev.c53
1 files changed, 31 insertions, 22 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index fe50242aa9e6..fa5b60452547 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1980,15 +1980,15 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
}
/**
- * e1000_get_hw_control - get control of the h/w from f/w
+ * e1000e_get_hw_control - get control of the h/w from f/w
* @adapter: address of board private structure
*
- * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
+ * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means that
* the driver is loaded. For AMT version (only with 82573)
* of the f/w this means that the network i/f is open.
**/
-static void e1000_get_hw_control(struct e1000_adapter *adapter)
+void e1000e_get_hw_control(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 ctrl_ext;
@@ -2005,16 +2005,16 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter)
}
/**
- * e1000_release_hw_control - release control of the h/w to f/w
+ * e1000e_release_hw_control - release control of the h/w to f/w
* @adapter: address of board private structure
*
- * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
+ * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means that the
* driver is no longer loaded. For AMT version (only with 82573) i
* of the f/w this means that the network i/f is closed.
*
**/
-static void e1000_release_hw_control(struct e1000_adapter *adapter)
+void e1000e_release_hw_control(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 ctrl_ext;
@@ -2445,7 +2445,7 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
(vid == adapter->mng_vlan_id)) {
/* release control to f/w */
- e1000_release_hw_control(adapter);
+ e1000e_release_hw_control(adapter);
return;
}
@@ -2734,6 +2734,9 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
else
ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
+
+ if (ret_val)
+ e_dbg("failed to enable jumbo frame workaround mode\n");
}
/* Program MC offset vector base */
@@ -3184,7 +3187,6 @@ void e1000e_reset(struct e1000_adapter *adapter)
ew32(PBA, pba);
}
-
/*
* flow control settings
*
@@ -3272,7 +3274,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
* that the network interface is in control
*/
if (adapter->flags & FLAG_HAS_AMT)
- e1000_get_hw_control(adapter);
+ e1000e_get_hw_control(adapter);
ew32(WUC, 0);
@@ -3285,6 +3287,13 @@ void e1000e_reset(struct e1000_adapter *adapter)
ew32(VET, ETH_P_8021Q);
e1000e_reset_adaptive(hw);
+
+ if (!netif_running(adapter->netdev) &&
+ !test_bit(__E1000_TESTING, &adapter->state)) {
+ e1000_power_down_phy(adapter);
+ return;
+ }
+
e1000_get_phy_info(hw);
if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
@@ -3570,7 +3579,7 @@ static int e1000_open(struct net_device *netdev)
* interface is now open and reset the part to a known state.
*/
if (adapter->flags & FLAG_HAS_AMT) {
- e1000_get_hw_control(adapter);
+ e1000e_get_hw_control(adapter);
e1000e_reset(adapter);
}
@@ -3634,7 +3643,7 @@ static int e1000_open(struct net_device *netdev)
return 0;
err_req_irq:
- e1000_release_hw_control(adapter);
+ e1000e_release_hw_control(adapter);
e1000_power_down_phy(adapter);
e1000e_free_rx_resources(adapter);
err_setup_rx:
@@ -3689,8 +3698,9 @@ static int e1000_close(struct net_device *netdev)
* If AMT is enabled, let the firmware know that the network
* interface is now closed
*/
- if (adapter->flags & FLAG_HAS_AMT)
- e1000_release_hw_control(adapter);
+ if ((adapter->flags & FLAG_HAS_AMT) &&
+ !test_bit(__E1000_TESTING, &adapter->state))
+ e1000e_release_hw_control(adapter);
if ((adapter->flags & FLAG_HAS_ERT) ||
(adapter->hw.mac.type == e1000_pch2lan))
@@ -5209,7 +5219,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant.
*/
- e1000_release_hw_control(adapter);
+ e1000e_release_hw_control(adapter);
pci_disable_device(pdev);
@@ -5366,7 +5376,7 @@ static int __e1000_resume(struct pci_dev *pdev)
* under the control of the driver.
*/
if (!(adapter->flags & FLAG_HAS_AMT))
- e1000_get_hw_control(adapter);
+ e1000e_get_hw_control(adapter);
return 0;
}
@@ -5613,7 +5623,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
* under the control of the driver.
*/
if (!(adapter->flags & FLAG_HAS_AMT))
- e1000_get_hw_control(adapter);
+ e1000e_get_hw_control(adapter);
}
@@ -5636,7 +5646,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
ret_val = e1000_read_pba_string_generic(hw, pba_str,
E1000_PBANUM_LENGTH);
if (ret_val)
- strcpy(pba_str, "Unknown");
+ strncpy((char *)pba_str, "Unknown", sizeof(pba_str) - 1);
e_info("MAC: %d, PHY: %d, PBA No: %s\n",
hw->mac.type, hw->phy.type, pba_str);
}
@@ -5963,9 +5973,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
* under the control of the driver.
*/
if (!(adapter->flags & FLAG_HAS_AMT))
- e1000_get_hw_control(adapter);
+ e1000e_get_hw_control(adapter);
- strcpy(netdev->name, "eth%d");
+ strncpy(netdev->name, "eth%d", sizeof(netdev->name) - 1);
err = register_netdev(netdev);
if (err)
goto err_register;
@@ -5982,12 +5992,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
err_register:
if (!(adapter->flags & FLAG_HAS_AMT))
- e1000_release_hw_control(adapter);
+ e1000e_release_hw_control(adapter);
err_eeprom:
if (!e1000_check_reset_block(&adapter->hw))
e1000_phy_hw_reset(&adapter->hw);
err_hw_init:
-
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
err_sw_init:
@@ -6053,7 +6062,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant.
*/
- e1000_release_hw_control(adapter);
+ e1000e_release_hw_control(adapter);
e1000e_reset_interrupt_capability(adapter);
kfree(adapter->tx_ring);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 13:42:59 +0100