diff options
Diffstat (limited to 'drivers/net/enc28j60.c')
-rw-r--r-- | drivers/net/enc28j60.c | 22 |
1 files changed, 15 insertions, 7 deletions
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index b0ef46c51a9d..fc6cc038c7b8 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -944,7 +944,7 @@ static void enc28j60_hw_rx(struct net_device *ndev) if (netif_msg_rx_status(priv)) enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat); - if (!RSV_GETBIT(rxstat, RSV_RXOK)) { + if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) { if (netif_msg_rx_err(priv)) dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat); ndev->stats.rx_errors++; @@ -952,6 +952,8 @@ static void enc28j60_hw_rx(struct net_device *ndev) ndev->stats.rx_crc_errors++; if (RSV_GETBIT(rxstat, RSV_LENCHECKERR)) ndev->stats.rx_frame_errors++; + if (len > MAX_FRAMELEN) + ndev->stats.rx_over_errors++; } else { skb = dev_alloc_skb(len + NET_IP_ALIGN); if (!skb) { @@ -1529,6 +1531,17 @@ static int enc28j60_chipset_init(struct net_device *dev) return enc28j60_hw_init(priv); } +static const struct net_device_ops enc28j60_netdev_ops = { + .ndo_open = enc28j60_net_open, + .ndo_stop = enc28j60_net_close, + .ndo_start_xmit = enc28j60_send_packet, + .ndo_set_multicast_list = enc28j60_set_multicast_list, + .ndo_set_mac_address = enc28j60_set_mac_address, + .ndo_tx_timeout = enc28j60_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + static int __devinit enc28j60_probe(struct spi_device *spi) { struct net_device *dev; @@ -1583,12 +1596,7 @@ static int __devinit enc28j60_probe(struct spi_device *spi) dev->if_port = IF_PORT_10BASET; dev->irq = spi->irq; - dev->open = enc28j60_net_open; - dev->stop = enc28j60_net_close; - dev->hard_start_xmit = enc28j60_send_packet; - dev->set_multicast_list = &enc28j60_set_multicast_list; - dev->set_mac_address = enc28j60_set_mac_address; - dev->tx_timeout = &enc28j60_tx_timeout; + dev->netdev_ops = &enc28j60_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops); |