diff options
Diffstat (limited to 'drivers/net/ethernet/8390/ac3200.c')
| -rw-r--r-- | drivers/net/ethernet/8390/ac3200.c | 431 |
1 files changed, 0 insertions, 431 deletions
diff --git a/drivers/net/ethernet/8390/ac3200.c b/drivers/net/ethernet/8390/ac3200.c deleted file mode 100644 index ccf07942ff6e..000000000000 --- a/drivers/net/ethernet/8390/ac3200.c +++ /dev/null @@ -1,431 +0,0 @@ -/* ac3200.c: A driver for the Ansel Communications EISA ethernet adaptor. */ -/* - Written 1993, 1994 by Donald Becker. - Copyright 1993 United States Government as represented by the Director, - National Security Agency. This software may only be used and distributed - according to the terms of the GNU General Public License as modified by SRC, - incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - This is driver for the Ansel Communications Model 3200 EISA Ethernet LAN - Adapter. The programming information is from the users manual, as related - by glee@ardnassak.math.clemson.edu. - - Changelog: - - Paul Gortmaker 05/98 : add support for shared mem above 1MB. - - */ - -static const char version[] = - "ac3200.c:v1.01 7/1/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#include <linux/module.h> -#include <linux/eisa.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#include "8390.h" - -#define DRV_NAME "ac3200" - -/* Offsets from the base address. */ -#define AC_NIC_BASE 0x00 -#define AC_SA_PROM 0x16 /* The station address PROM. */ -#define AC_ADDR0 0x00 /* Prefix station address values. */ -#define AC_ADDR1 0x40 -#define AC_ADDR2 0x90 -#define AC_ID_PORT 0xC80 -#define AC_EISA_ID 0x0110d305 -#define AC_RESET_PORT 0xC84 -#define AC_RESET 0x00 -#define AC_ENABLE 0x01 -#define AC_CONFIG 0xC90 /* The configuration port. */ - -#define AC_IO_EXTENT 0x20 - /* Actually accessed is: - * AC_NIC_BASE (0-15) - * AC_SA_PROM (0-5) - * AC_ID_PORT (0-3) - * AC_RESET_PORT - * AC_CONFIG - */ - -/* Decoding of the configuration register. */ -static unsigned char config2irqmap[8] __initdata = {15, 12, 11, 10, 9, 7, 5, 3}; -static int addrmap[8] = -{0xFF0000, 0xFE0000, 0xFD0000, 0xFFF0000, 0xFFE0000, 0xFFC0000, 0xD0000, 0 }; -static const char *port_name[4] = { "10baseT", "invalid", "AUI", "10base2"}; - -#define config2irq(configval) config2irqmap[((configval) >> 3) & 7] -#define config2mem(configval) addrmap[(configval) & 7] -#define config2name(configval) port_name[((configval) >> 6) & 3] - -/* First and last 8390 pages. */ -#define AC_START_PG 0x00 /* First page of 8390 TX buffer */ -#define AC_STOP_PG 0x80 /* Last page +1 of the 8390 RX ring */ - -static int ac_probe1(int ioaddr, struct net_device *dev); - -static int ac_open(struct net_device *dev); -static void ac_reset_8390(struct net_device *dev); -static void ac_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void ac_block_output(struct net_device *dev, const int count, - const unsigned char *buf, const int start_page); -static void ac_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); - -static int ac_close_card(struct net_device *dev); - - -/* Probe for the AC3200. - - The AC3200 can be identified by either the EISA configuration registers, - or the unique value in the station address PROM. - */ - -static int __init do_ac3200_probe(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - int irq = dev->irq; - int mem_start = dev->mem_start; - - if (ioaddr > 0x1ff) /* Check a single specified location. */ - return ac_probe1(ioaddr, dev); - else if (ioaddr > 0) /* Don't probe at all. */ - return -ENXIO; - - if ( ! EISA_bus) - return -ENXIO; - - for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) { - if (ac_probe1(ioaddr, dev) == 0) - return 0; - dev->irq = irq; - dev->mem_start = mem_start; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init ac3200_probe(int unit) -{ - struct net_device *dev = alloc_ei_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_ac3200_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops ac_netdev_ops = { - .ndo_open = ac_open, - .ndo_stop = ac_close_card, - - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_rx_mode = ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, -#endif -}; - -static int __init ac_probe1(int ioaddr, struct net_device *dev) -{ - int i, retval; - - if (!request_region(ioaddr, AC_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - if (inb_p(ioaddr + AC_ID_PORT) == 0xff) { - retval = -ENODEV; - goto out; - } - - if (inl(ioaddr + AC_ID_PORT) != AC_EISA_ID) { - retval = -ENODEV; - goto out; - } - -#ifndef final_version - printk(KERN_DEBUG "AC3200 ethercard configuration register is %#02x," - " EISA ID %02x %02x %02x %02x.\n", inb(ioaddr + AC_CONFIG), - inb(ioaddr + AC_ID_PORT + 0), inb(ioaddr + AC_ID_PORT + 1), - inb(ioaddr + AC_ID_PORT + 2), inb(ioaddr + AC_ID_PORT + 3)); -#endif - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + AC_SA_PROM + i); - - printk(KERN_DEBUG "AC3200 in EISA slot %d, node %pM", - ioaddr/0x1000, dev->dev_addr); -#if 0 - /* Check the vendor ID/prefix. Redundant after checking the EISA ID */ - if (inb(ioaddr + AC_SA_PROM + 0) != AC_ADDR0 - || inb(ioaddr + AC_SA_PROM + 1) != AC_ADDR1 - || inb(ioaddr + AC_SA_PROM + 2) != AC_ADDR2 ) { - printk(", not found (invalid prefix).\n"); - retval = -ENODEV; - goto out; - } -#endif - - /* Assign and allocate the interrupt now. */ - if (dev->irq == 0) { - dev->irq = config2irq(inb(ioaddr + AC_CONFIG)); - printk(", using"); - } else { - dev->irq = irq_canonicalize(dev->irq); - printk(", assigning"); - } - - retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev); - if (retval) { - printk (" nothing! Unable to get IRQ %d.\n", dev->irq); - goto out; - } - - printk(" IRQ %d, %s port\n", dev->irq, port_name[dev->if_port]); - - dev->base_addr = ioaddr; - -#ifdef notyet - if (dev->mem_start) { /* Override the value from the board. */ - for (i = 0; i < 7; i++) - if (addrmap[i] == dev->mem_start) - break; - if (i >= 7) - i = 0; - outb((inb(ioaddr + AC_CONFIG) & ~7) | i, ioaddr + AC_CONFIG); - } -#endif - - dev->if_port = inb(ioaddr + AC_CONFIG) >> 6; - dev->mem_start = config2mem(inb(ioaddr + AC_CONFIG)); - - printk("%s: AC3200 at %#3x with %dkB memory at physical address %#lx.\n", - dev->name, ioaddr, AC_STOP_PG/4, dev->mem_start); - - /* - * BEWARE!! Some dain-bramaged EISA SCUs will allow you to put - * the card mem within the region covered by `normal' RAM !!! - * - * ioremap() will fail in that case. - */ - ei_status.mem = ioremap(dev->mem_start, AC_STOP_PG*0x100); - if (!ei_status.mem) { - printk(KERN_ERR "ac3200.c: Unable to remap card memory above 1MB !!\n"); - printk(KERN_ERR "ac3200.c: Try using EISA SCU to set memory below 1MB.\n"); - printk(KERN_ERR "ac3200.c: Driver NOT installed.\n"); - retval = -EINVAL; - goto out1; - } - printk("ac3200.c: remapped %dkB card memory to virtual address %p\n", - AC_STOP_PG/4, ei_status.mem); - - dev->mem_start = (unsigned long)ei_status.mem; - dev->mem_end = dev->mem_start + (AC_STOP_PG - AC_START_PG)*256; - - ei_status.name = "AC3200"; - ei_status.tx_start_page = AC_START_PG; - ei_status.rx_start_page = AC_START_PG + TX_PAGES; - ei_status.stop_page = AC_STOP_PG; - ei_status.word16 = 1; - - if (ei_debug > 0) - printk(version); - - ei_status.reset_8390 = &ac_reset_8390; - ei_status.block_input = &ac_block_input; - ei_status.block_output = &ac_block_output; - ei_status.get_8390_hdr = &ac_get_8390_hdr; - - dev->netdev_ops = &ac_netdev_ops; - NS8390_init(dev, 0); - - retval = register_netdev(dev); - if (retval) - goto out2; - return 0; -out2: - if (ei_status.reg0) - iounmap(ei_status.mem); -out1: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, AC_IO_EXTENT); - return retval; -} - -static int ac_open(struct net_device *dev) -{ -#ifdef notyet - /* Someday we may enable the IRQ and shared memory here. */ - int ioaddr = dev->base_addr; -#endif - - ei_open(dev); - return 0; -} - -static void ac_reset_8390(struct net_device *dev) -{ - ushort ioaddr = dev->base_addr; - - outb(AC_RESET, ioaddr + AC_RESET_PORT); - if (ei_debug > 1) printk("resetting AC3200, t=%ld...", jiffies); - - ei_status.txing = 0; - outb(AC_ENABLE, ioaddr + AC_RESET_PORT); - if (ei_debug > 1) printk("reset done\n"); -} - -/* Grab the 8390 specific header. Similar to the block_input routine, but - we don't need to be concerned with ring wrap as the header will be at - the start of a page, so we optimize accordingly. */ - -static void -ac_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - void __iomem *hdr_start = ei_status.mem + ((ring_page - AC_START_PG)<<8); - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); -} - -/* Block input and output are easy on shared memory ethercards, the only - complication is when the ring buffer wraps. */ - -static void ac_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset) -{ - void __iomem *start = ei_status.mem + ring_offset - AC_START_PG*256; - - if (ring_offset + count > AC_STOP_PG*256) { - /* We must wrap the input move. */ - int semi_count = AC_STOP_PG*256 - ring_offset; - memcpy_fromio(skb->data, start, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, - ei_status.mem + TX_PAGES*256, count); - } else { - memcpy_fromio(skb->data, start, count); - } -} - -static void ac_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - void __iomem *shmem = ei_status.mem + ((start_page - AC_START_PG)<<8); - - memcpy_toio(shmem, buf, count); -} - -static int ac_close_card(struct net_device *dev) -{ - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); - -#ifdef notyet - /* We should someday disable shared memory and interrupts. */ - outb(0x00, ioaddr + 6); /* Disable interrupts. */ - free_irq(dev->irq, dev); -#endif - - ei_close(dev); - return 0; -} - -#ifdef MODULE -#define MAX_AC32_CARDS 4 /* Max number of AC32 cards per module */ -static struct net_device *dev_ac32[MAX_AC32_CARDS]; -static int io[MAX_AC32_CARDS]; -static int irq[MAX_AC32_CARDS]; -static int mem[MAX_AC32_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s)"); -MODULE_PARM_DESC(mem, "Memory base address(es)"); -MODULE_DESCRIPTION("Ansel AC3200 EISA ethernet driver"); -MODULE_LICENSE("GPL"); - -static int __init ac3200_module_init(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_AC32_CARDS; this_dev++) { - if (io[this_dev] == 0 && this_dev != 0) - break; - dev = alloc_ei_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_start = mem[this_dev]; /* Currently ignored by driver */ - if (do_ac3200_probe(dev) == 0) { - dev_ac32[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "ac3200.c: No ac3200 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* Someday free_irq may be in ac_close_card() */ - free_irq(dev->irq, dev); - release_region(dev->base_addr, AC_IO_EXTENT); - iounmap(ei_status.mem); -} - -static void __exit ac3200_module_exit(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_AC32_CARDS; this_dev++) { - struct net_device *dev = dev_ac32[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -module_init(ac3200_module_init); -module_exit(ac3200_module_exit); -#endif /* MODULE */ |