1 files changed, 806 insertions, 0 deletions

diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
new file mode 100644
index 000000000000..20345f6bf894
--- /dev/null
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -0,0 +1,806 @@
+/*
+ * Copyright (C) 2004-2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the ARC EMAC 10100 (hardware revision 5)
+ *
+ * Contributors:
+ *		Amit Bhor
+ *		Sameer Dhavale
+ *		Vineet Gupta
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+
+#include "emac.h"
+
+#define DRV_NAME	"arc_emac"
+#define DRV_VERSION	"1.0"
+
+/**
+ * arc_emac_adjust_link - Adjust the PHY link duplex.
+ * @ndev:	Pointer to the net_device structure.
+ *
+ * This function is called to change the duplex setting after auto negotiation
+ * is done by the PHY.
+ */
+static void arc_emac_adjust_link(struct net_device *ndev)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	struct phy_device *phy_dev = priv->phy_dev;
+	unsigned int reg, state_changed = 0;
+
+	if (priv->link != phy_dev->link) {
+		priv->link = phy_dev->link;
+		state_changed = 1;
+	}
+
+	if (priv->speed != phy_dev->speed) {
+		priv->speed = phy_dev->speed;
+		state_changed = 1;
+	}
+
+	if (priv->duplex != phy_dev->duplex) {
+		reg = arc_reg_get(priv, R_CTRL);
+
+		if (DUPLEX_FULL == phy_dev->duplex)
+			reg |= ENFL_MASK;
+		else
+			reg &= ~ENFL_MASK;
+
+		arc_reg_set(priv, R_CTRL, reg);
+		priv->duplex = phy_dev->duplex;
+		state_changed = 1;
+	}
+
+	if (state_changed)
+		phy_print_status(phy_dev);
+}
+
+/**
+ * arc_emac_get_settings - Get PHY settings.
+ * @ndev:	Pointer to net_device structure.
+ * @cmd:	Pointer to ethtool_cmd structure.
+ *
+ * This implements ethtool command for getting PHY settings. If PHY could
+ * not be found, the function returns -ENODEV. This function calls the
+ * relevant PHY ethtool API to get the PHY settings.
+ * Issue "ethtool ethX" under linux prompt to execute this function.
+ */
+static int arc_emac_get_settings(struct net_device *ndev,
+				 struct ethtool_cmd *cmd)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+
+	return phy_ethtool_gset(priv->phy_dev, cmd);
+}
+
+/**
+ * arc_emac_set_settings - Set PHY settings as passed in the argument.
+ * @ndev:	Pointer to net_device structure.
+ * @cmd:	Pointer to ethtool_cmd structure.
+ *
+ * This implements ethtool command for setting various PHY settings. If PHY
+ * could not be found, the function returns -ENODEV. This function calls the
+ * relevant PHY ethtool API to set the PHY.
+ * Issue e.g. "ethtool -s ethX speed 1000" under linux prompt to execute this
+ * function.
+ */
+static int arc_emac_set_settings(struct net_device *ndev,
+				 struct ethtool_cmd *cmd)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	return phy_ethtool_sset(priv->phy_dev, cmd);
+}
+
+/**
+ * arc_emac_get_drvinfo - Get EMAC driver information.
+ * @ndev:	Pointer to net_device structure.
+ * @info:	Pointer to ethtool_drvinfo structure.
+ *
+ * This implements ethtool command for getting the driver information.
+ * Issue "ethtool -i ethX" under linux prompt to execute this function.
+ */
+static void arc_emac_get_drvinfo(struct net_device *ndev,
+				 struct ethtool_drvinfo *info)
+{
+	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+}
+
+static const struct ethtool_ops arc_emac_ethtool_ops = {
+	.get_settings	= arc_emac_get_settings,
+	.set_settings	= arc_emac_set_settings,
+	.get_drvinfo	= arc_emac_get_drvinfo,
+	.get_link	= ethtool_op_get_link,
+};
+
+#define FIRST_OR_LAST_MASK	(FIRST_MASK | LAST_MASK)
+
+/**
+ * arc_emac_tx_clean - clears processed by EMAC Tx BDs.
+ * @ndev:	Pointer to the network device.
+ */
+static void arc_emac_tx_clean(struct net_device *ndev)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &priv->stats;
+	unsigned int i;
+
+	for (i = 0; i < TX_BD_NUM; i++) {
+		unsigned int *txbd_dirty = &priv->txbd_dirty;
+		struct arc_emac_bd *txbd = &priv->txbd[*txbd_dirty];
+		struct buffer_state *tx_buff = &priv->tx_buff[*txbd_dirty];
+		struct sk_buff *skb = tx_buff->skb;
+		unsigned int info = le32_to_cpu(txbd->info);
+
+		*txbd_dirty = (*txbd_dirty + 1) % TX_BD_NUM;
+
+		if ((info & FOR_EMAC) || !txbd->data)
+			break;
+
+		if (unlikely(info & (DROP | DEFR | LTCL | UFLO))) {
+			stats->tx_errors++;
+			stats->tx_dropped++;
+
+			if (info & DEFR)
+				stats->tx_carrier_errors++;
+
+			if (info & LTCL)
+				stats->collisions++;
+
+			if (info & UFLO)
+				stats->tx_fifo_errors++;
+		} else if (likely(info & FIRST_OR_LAST_MASK)) {
+			stats->tx_packets++;
+			stats->tx_bytes += skb->len;
+		}
+
+		dma_unmap_single(&ndev->dev, dma_unmap_addr(&tx_buff, addr),
+				 dma_unmap_len(&tx_buff, len), DMA_TO_DEVICE);
+
+		/* return the sk_buff to system */
+		dev_kfree_skb_irq(skb);
+
+		txbd->data = 0;
+		txbd->info = 0;
+
+		if (netif_queue_stopped(ndev))
+			netif_wake_queue(ndev);
+	}
+}
+
+/**
+ * arc_emac_rx - processing of Rx packets.
+ * @ndev:	Pointer to the network device.
+ * @budget:	How many BDs to process on 1 call.
+ *
+ * returns:	Number of processed BDs
+ *
+ * Iterate through Rx BDs and deliver received packages to upper layer.
+ */
+static int arc_emac_rx(struct net_device *ndev, int budget)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	unsigned int work_done;
+
+	for (work_done = 0; work_done <= budget; work_done++) {
+		unsigned int *last_rx_bd = &priv->last_rx_bd;
+		struct net_device_stats *stats = &priv->stats;
+		struct buffer_state *rx_buff = &priv->rx_buff[*last_rx_bd];
+		struct arc_emac_bd *rxbd = &priv->rxbd[*last_rx_bd];
+		unsigned int buflen = EMAC_BUFFER_SIZE;
+		unsigned int pktlen, info = le32_to_cpu(rxbd->info);
+		struct sk_buff *skb;
+		dma_addr_t addr;
+
+		if (unlikely((info & OWN_MASK) == FOR_EMAC))
+			break;
+
+		/* Make a note that we saw a packet at this BD.
+		 * So next time, driver starts from this + 1
+		 */
+		*last_rx_bd = (*last_rx_bd + 1) % RX_BD_NUM;
+
+		if (unlikely((info & FIRST_OR_LAST_MASK) !=
+			     FIRST_OR_LAST_MASK)) {
+			/* We pre-allocate buffers of MTU size so incoming
+			 * packets won't be split/chained.
+			 */
+			if (net_ratelimit())
+				netdev_err(ndev, "incomplete packet received\n");
+
+			/* Return ownership to EMAC */
+			rxbd->info = cpu_to_le32(FOR_EMAC | buflen);
+			stats->rx_errors++;
+			stats->rx_length_errors++;
+			continue;
+		}
+
+		pktlen = info & LEN_MASK;
+		stats->rx_packets++;
+		stats->rx_bytes += pktlen;
+		skb = rx_buff->skb;
+		skb_put(skb, pktlen);
+		skb->dev = ndev;
+		skb->protocol = eth_type_trans(skb, ndev);
+
+		dma_unmap_single(&ndev->dev, dma_unmap_addr(&rx_buff, addr),
+				 dma_unmap_len(&rx_buff, len), DMA_FROM_DEVICE);
+
+		/* Prepare the BD for next cycle */
+		rx_buff->skb = netdev_alloc_skb_ip_align(ndev, buflen);
+		if (unlikely(!rx_buff->skb)) {
+			stats->rx_errors++;
+			/* Because receive_skb is below, increment rx_dropped */
+			stats->rx_dropped++;
+			continue;
+		}
+
+		/* receive_skb only if new skb was allocated to avoid holes */
+		netif_receive_skb(skb);
+
+		addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data,
+				      buflen, DMA_FROM_DEVICE);
+		if (dma_mapping_error(&ndev->dev, addr)) {
+			if (net_ratelimit())
+				netdev_err(ndev, "cannot dma map\n");
+			dev_kfree_skb(rx_buff->skb);
+			stats->rx_errors++;
+			continue;
+		}
+		dma_unmap_addr_set(&rx_buff, mapping, addr);
+		dma_unmap_len_set(&rx_buff, len, buflen);
+
+		rxbd->data = cpu_to_le32(rx_buff->skb->data);
+
+		/* Make sure pointer to data buffer is set */
+		wmb();
+
+		/* Return ownership to EMAC */
+		rxbd->info = cpu_to_le32(FOR_EMAC | buflen);
+	}
+
+	return work_done;
+}
+
+/**
+ * arc_emac_poll - NAPI poll handler.
+ * @napi:	Pointer to napi_struct structure.
+ * @budget:	How many BDs to process on 1 call.
+ *
+ * returns:	Number of processed BDs
+ */
+static int arc_emac_poll(struct napi_struct *napi, int budget)
+{
+	struct net_device *ndev = napi->dev;
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	unsigned int work_done;
+
+	arc_emac_tx_clean(ndev);
+
+	work_done = arc_emac_rx(ndev, budget);
+	if (work_done < budget) {
+		napi_complete(napi);
+		arc_reg_or(priv, R_ENABLE, RXINT_MASK);
+	}
+
+	return work_done;
+}
+
+/**
+ * arc_emac_intr - Global interrupt handler for EMAC.
+ * @irq:		irq number.
+ * @dev_instance:	device instance.
+ *
+ * returns: IRQ_HANDLED for all cases.
+ *
+ * ARC EMAC has only 1 interrupt line, and depending on bits raised in
+ * STATUS register we may tell what is a reason for interrupt to fire.
+ */
+static irqreturn_t arc_emac_intr(int irq, void *dev_instance)
+{
+	struct net_device *ndev = dev_instance;
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &priv->stats;
+	unsigned int status;
+
+	status = arc_reg_get(priv, R_STATUS);
+	status &= ~MDIO_MASK;
+
+	/* Reset all flags except "MDIO complete" */
+	arc_reg_set(priv, R_STATUS, status);
+
+	if (status & RXINT_MASK) {
+		if (likely(napi_schedule_prep(&priv->napi))) {
+			arc_reg_clr(priv, R_ENABLE, RXINT_MASK);
+			__napi_schedule(&priv->napi);
+		}
+	}
+
+	if (status & ERR_MASK) {
+		/* MSER/RXCR/RXFR/RXFL interrupt fires on corresponding
+		 * 8-bit error counter overrun.
+		 */
+
+		if (status & MSER_MASK) {
+			stats->rx_missed_errors += 0x100;
+			stats->rx_errors += 0x100;
+		}
+
+		if (status & RXCR_MASK) {
+			stats->rx_crc_errors += 0x100;
+			stats->rx_errors += 0x100;
+		}
+
+		if (status & RXFR_MASK) {
+			stats->rx_frame_errors += 0x100;
+			stats->rx_errors += 0x100;
+		}
+
+		if (status & RXFL_MASK) {
+			stats->rx_over_errors += 0x100;
+			stats->rx_errors += 0x100;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * arc_emac_open - Open the network device.
+ * @ndev:	Pointer to the network device.
+ *
+ * returns: 0, on success or non-zero error value on failure.
+ *
+ * This function sets the MAC address, requests and enables an IRQ
+ * for the EMAC device and starts the Tx queue.
+ * It also connects to the phy device.
+ */
+static int arc_emac_open(struct net_device *ndev)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	struct phy_device *phy_dev = priv->phy_dev;
+	struct arc_emac_bd *bd;
+	struct sk_buff *skb;
+	int i;
+
+	phy_dev->autoneg = AUTONEG_ENABLE;
+	phy_dev->speed = 0;
+	phy_dev->duplex = 0;
+	phy_dev->advertising = phy_dev->supported;
+
+	if (priv->max_speed > 100) {
+		phy_dev->advertising &= PHY_GBIT_FEATURES;
+	} else if (priv->max_speed <= 100) {
+		phy_dev->advertising &= PHY_BASIC_FEATURES;
+		if (priv->max_speed <= 10) {
+			phy_dev->advertising &= ~SUPPORTED_100baseT_Half;
+			phy_dev->advertising &= ~SUPPORTED_100baseT_Full;
+		}
+	}
+
+	/* Allocate and set buffers for Rx BD's */
+	bd = priv->rxbd;
+	for (i = 0; i < RX_BD_NUM; i++) {
+		skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE);
+		if (unlikely(!skb))
+			return -ENOMEM;
+
+		priv->rx_buff[i].skb = skb;
+		bd->data = cpu_to_le32(skb->data);
+
+		/* Make sure pointer to data buffer is set */
+		wmb();
+
+		/* Set ownership to EMAC */
+		bd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE);
+		bd++;
+	}
+
+	priv->last_rx_bd = 0;
+
+	/* Clean Tx BD's */
+	memset(priv->txbd, 0, TX_RING_SZ);
+
+	/* Initialize logical address filter */
+	arc_reg_set(priv, R_LAFL, 0);
+	arc_reg_set(priv, R_LAFH, 0);
+
+	/* Set BD ring pointers for device side */
+	arc_reg_set(priv, R_RX_RING, (unsigned int)priv->rxbd_dma);
+	arc_reg_set(priv, R_TX_RING, (unsigned int)priv->txbd_dma);
+
+	/* Enable interrupts */
+	arc_reg_set(priv, R_ENABLE, RXINT_MASK | ERR_MASK);
+
+	/* Set CONTROL */
+	arc_reg_set(priv, R_CTRL,
+		     (RX_BD_NUM << 24) |	/* RX BD table length */
+		     (TX_BD_NUM << 16) |	/* TX BD table length */
+		     TXRN_MASK | RXRN_MASK);
+
+	napi_enable(&priv->napi);
+
+	/* Enable EMAC */
+	arc_reg_or(priv, R_CTRL, EN_MASK);
+
+	phy_start_aneg(priv->phy_dev);
+
+	netif_start_queue(ndev);
+
+	return 0;
+}
+
+/**
+ * arc_emac_stop - Close the network device.
+ * @ndev:	Pointer to the network device.
+ *
+ * This function stops the Tx queue, disables interrupts and frees the IRQ for
+ * the EMAC device.
+ * It also disconnects the PHY device associated with the EMAC device.
+ */
+static int arc_emac_stop(struct net_device *ndev)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+
+	napi_disable(&priv->napi);
+	netif_stop_queue(ndev);
+
+	/* Disable interrupts */
+	arc_reg_clr(priv, R_ENABLE, RXINT_MASK | ERR_MASK);
+
+	/* Disable EMAC */
+	arc_reg_clr(priv, R_CTRL, EN_MASK);
+
+	return 0;
+}
+
+/**
+ * arc_emac_stats - Get system network statistics.
+ * @ndev:	Pointer to net_device structure.
+ *
+ * Returns the address of the device statistics structure.
+ * Statistics are updated in interrupt handler.
+ */
+static struct net_device_stats *arc_emac_stats(struct net_device *ndev)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &priv->stats;
+	unsigned long miss, rxerr;
+	u8 rxcrc, rxfram, rxoflow;
+
+	rxerr = arc_reg_get(priv, R_RXERR);
+	miss = arc_reg_get(priv, R_MISS);
+
+	rxcrc = rxerr;
+	rxfram = rxerr >> 8;
+	rxoflow = rxerr >> 16;
+
+	stats->rx_errors += miss;
+	stats->rx_errors += rxcrc + rxfram + rxoflow;
+
+	stats->rx_over_errors += rxoflow;
+	stats->rx_frame_errors += rxfram;
+	stats->rx_crc_errors += rxcrc;
+	stats->rx_missed_errors += miss;
+
+	return stats;
+}
+
+/**
+ * arc_emac_tx - Starts the data transmission.
+ * @skb:	sk_buff pointer that contains data to be Transmitted.
+ * @ndev:	Pointer to net_device structure.
+ *
+ * returns: NETDEV_TX_OK, on success
+ *		NETDEV_TX_BUSY, if any of the descriptors are not free.
+ *
+ * This function is invoked from upper layers to initiate transmission.
+ */
+static int arc_emac_tx(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	unsigned int len, *txbd_curr = &priv->txbd_curr;
+	struct net_device_stats *stats = &priv->stats;
+	__le32 *info = &priv->txbd[*txbd_curr].info;
+	dma_addr_t addr;
+
+	if (skb_padto(skb, ETH_ZLEN))
+		return NETDEV_TX_OK;
+
+	len = max_t(unsigned int, ETH_ZLEN, skb->len);
+
+	/* EMAC still holds this buffer in its possession.
+	 * CPU must not modify this buffer descriptor
+	 */
+	if (unlikely((le32_to_cpu(*info) & OWN_MASK) == FOR_EMAC)) {
+		netif_stop_queue(ndev);
+		return NETDEV_TX_BUSY;
+	}
+
+	addr = dma_map_single(&ndev->dev, (void *)skb->data, len,
+			      DMA_TO_DEVICE);
+
+	if (unlikely(dma_mapping_error(&ndev->dev, addr))) {
+		stats->tx_dropped++;
+		stats->tx_errors++;
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+	dma_unmap_addr_set(&priv->tx_buff[*txbd_curr], mapping, addr);
+	dma_unmap_len_set(&priv->tx_buff[*txbd_curr], len, len);
+
+	priv->tx_buff[*txbd_curr].skb = skb;
+	priv->txbd[*txbd_curr].data = cpu_to_le32(skb->data);
+
+	/* Make sure pointer to data buffer is set */
+	wmb();
+
+	*info = cpu_to_le32(FOR_EMAC | FIRST_OR_LAST_MASK | len);
+
+	/* Increment index to point to the next BD */
+	*txbd_curr = (*txbd_curr + 1) % TX_BD_NUM;
+
+	/* Get "info" of the next BD */
+	info = &priv->txbd[*txbd_curr].info;
+
+	/* Check if if Tx BD ring is full - next BD is still owned by EMAC */
+	if (unlikely((le32_to_cpu(*info) & OWN_MASK) == FOR_EMAC))
+		netif_stop_queue(ndev);
+
+	arc_reg_set(priv, R_STATUS, TXPL_MASK);
+
+	skb_tx_timestamp(skb);
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * arc_emac_set_address - Set the MAC address for this device.
+ * @ndev:	Pointer to net_device structure.
+ * @p:		6 byte Address to be written as MAC address.
+ *
+ * This function copies the HW address from the sockaddr structure to the
+ * net_device structure and updates the address in HW.
+ *
+ * returns:	-EBUSY if the net device is busy or 0 if the address is set
+ *		successfully.
+ */
+static int arc_emac_set_address(struct net_device *ndev, void *p)
+{
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+	struct sockaddr *addr = p;
+	unsigned int addr_low, addr_hi;
+
+	if (netif_running(ndev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
+
+	addr_low = le32_to_cpu(*(__le32 *) &ndev->dev_addr[0]);
+	addr_hi = le16_to_cpu(*(__le16 *) &ndev->dev_addr[4]);
+
+	arc_reg_set(priv, R_ADDRL, addr_low);
+	arc_reg_set(priv, R_ADDRH, addr_hi);
+
+	return 0;
+}
+
+static const struct net_device_ops arc_emac_netdev_ops = {
+	.ndo_open		= arc_emac_open,
+	.ndo_stop		= arc_emac_stop,
+	.ndo_start_xmit		= arc_emac_tx,
+	.ndo_set_mac_address	= arc_emac_set_address,
+	.ndo_get_stats		= arc_emac_stats,
+};
+
+static int arc_emac_probe(struct platform_device *pdev)
+{
+	struct resource res_regs, res_irq;
+	struct device_node *phy_node;
+	struct arc_emac_priv *priv;
+	struct net_device *ndev;
+	const char *mac_addr;
+	unsigned int id, clock_frequency;
+	int err;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	/* Get PHY from device tree */
+	phy_node = of_parse_phandle(pdev->dev.of_node, "phy", 0);
+	if (!phy_node) {
+		dev_err(&pdev->dev, "failed to retrieve phy description from device tree\n");
+		return -ENODEV;
+	}
+
+	/* Get EMAC registers base address from device tree */
+	err = of_address_to_resource(pdev->dev.of_node, 0, &res_regs);
+	if (err) {
+		dev_err(&pdev->dev, "failed to retrieve registers base from device tree\n");
+		return -ENODEV;
+	}
+
+	/* Get CPU clock frequency from device tree */
+	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				 &clock_frequency)) {
+		dev_err(&pdev->dev, "failed to retrieve <clock-frequency> from device tree\n");
+		return -EINVAL;
+	}
+
+	/* Get IRQ from device tree */
+	err = of_irq_to_resource(pdev->dev.of_node, 0, &res_irq);
+	if (!err) {
+		dev_err(&pdev->dev, "failed to retrieve <irq> value from device tree\n");
+		return -ENODEV;
+	}
+
+	ndev = alloc_etherdev(sizeof(struct arc_emac_priv));
+	if (!ndev)
+		return -ENOMEM;
+
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+
+	ndev->netdev_ops = &arc_emac_netdev_ops;
+	ndev->ethtool_ops = &arc_emac_ethtool_ops;
+	ndev->watchdog_timeo = TX_TIMEOUT;
+	/* FIXME :: no multicast support yet */
+	ndev->flags &= ~IFF_MULTICAST;
+
+	priv = netdev_priv(ndev);
+	priv->dev = &pdev->dev;
+	priv->ndev = ndev;
+
+	priv->regs = devm_ioremap_resource(&pdev->dev, &res_regs);
+	if (IS_ERR(priv->regs)) {
+		err = PTR_ERR(priv->regs);
+		goto out;
+	}
+	dev_dbg(&pdev->dev, "Registers base address is 0x%p\n", priv->regs);
+
+	id = arc_reg_get(priv, R_ID);
+
+	/* Check for EMAC revision 5 or 7, magic number */
+	if (!(id == 0x0005fd02 || id == 0x0007fd02)) {
+		dev_err(&pdev->dev, "ARC EMAC not detected, id=0x%x\n", id);
+		err = -ENODEV;
+		goto out;
+	}
+	dev_info(&pdev->dev, "ARC EMAC detected with id: 0x%x\n", id);
+
+	/* Set poll rate so that it polls every 1 ms */
+	arc_reg_set(priv, R_POLLRATE, clock_frequency / 1000000);
+
+	/* Get max speed of operation from device tree */
+	if (of_property_read_u32(pdev->dev.of_node, "max-speed",
+				 &priv->max_speed)) {
+		dev_err(&pdev->dev, "failed to retrieve <max-speed> from device tree\n");
+		err = -EINVAL;
+		goto out;
+	}
+
+	ndev->irq = res_irq.start;
+	dev_info(&pdev->dev, "IRQ is %d\n", ndev->irq);
+
+	/* Register interrupt handler for device */
+	err = devm_request_irq(&pdev->dev, ndev->irq, arc_emac_intr, 0,
+			       ndev->name, ndev);
+	if (err) {
+		dev_err(&pdev->dev, "could not allocate IRQ\n");
+		goto out;
+	}
+
+	/* Get MAC address from device tree */
+	mac_addr = of_get_mac_address(pdev->dev.of_node);
+
+	if (!mac_addr || !is_valid_ether_addr(mac_addr))
+		eth_hw_addr_random(ndev);
+	else
+		memcpy(ndev->dev_addr, mac_addr, ETH_ALEN);
+
+	dev_info(&pdev->dev, "MAC address is now %pM\n", ndev->dev_addr);
+
+	/* Do 1 allocation instead of 2 separate ones for Rx and Tx BD rings */
+	priv->rxbd = dmam_alloc_coherent(&pdev->dev, RX_RING_SZ + TX_RING_SZ,
+					 &priv->rxbd_dma, GFP_KERNEL);
+
+	if (!priv->rxbd) {
+		dev_err(&pdev->dev, "failed to allocate data buffers\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	priv->txbd = priv->rxbd + RX_BD_NUM;
+
+	priv->txbd_dma = priv->rxbd_dma + RX_RING_SZ;
+	dev_dbg(&pdev->dev, "EMAC Device addr: Rx Ring [0x%x], Tx Ring[%x]\n",
+		(unsigned int)priv->rxbd_dma, (unsigned int)priv->txbd_dma);
+
+	err = arc_mdio_probe(pdev, priv);
+	if (err) {
+		dev_err(&pdev->dev, "failed to probe MII bus\n");
+		goto out;
+	}
+
+	priv->phy_dev = of_phy_connect(ndev, phy_node, arc_emac_adjust_link, 0,
+				       PHY_INTERFACE_MODE_MII);
+	if (!priv->phy_dev) {
+		dev_err(&pdev->dev, "of_phy_connect() failed\n");
+		err = -ENODEV;
+		goto out;
+	}
+
+	dev_info(&pdev->dev, "connected to %s phy with id 0x%x\n",
+		 priv->phy_dev->drv->name, priv->phy_dev->phy_id);
+
+	netif_napi_add(ndev, &priv->napi, arc_emac_poll, ARC_EMAC_NAPI_WEIGHT);
+
+	err = register_netdev(ndev);
+	if (err) {
+		netif_napi_del(&priv->napi);
+		dev_err(&pdev->dev, "failed to register network device\n");
+		goto out;
+	}
+
+	return 0;
+
+out:
+	free_netdev(ndev);
+	return err;
+}
+
+static int arc_emac_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+
+	phy_disconnect(priv->phy_dev);
+	priv->phy_dev = NULL;
+	arc_mdio_remove(priv);
+	unregister_netdev(ndev);
+	netif_napi_del(&priv->napi);
+	free_netdev(ndev);
+
+	return 0;
+}
+
+static const struct of_device_id arc_emac_dt_ids[] = {
+	{ .compatible = "snps,arc-emac" },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, arc_emac_dt_ids);
+
+static struct platform_driver arc_emac_driver = {
+	.probe = arc_emac_probe,
+	.remove = arc_emac_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table  = arc_emac_dt_ids,
+		},
+};
+
+module_platform_driver(arc_emac_driver);
+
+MODULE_AUTHOR("Alexey Brodkin <abrodkin@synopsys.com>");
+MODULE_DESCRIPTION("ARC EMAC driver");
+MODULE_LICENSE("GPL");