diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/mvneta.c')
| -rw-r--r-- | drivers/net/ethernet/marvell/mvneta.c | 46 |
1 files changed, 33 insertions, 13 deletions
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index d04b1c3c9b85..14786c8bf99e 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -91,7 +91,7 @@ #define MVNETA_RX_MIN_FRAME_SIZE 0x247c #define MVNETA_SERDES_CFG 0x24A0 #define MVNETA_SGMII_SERDES_PROTO 0x0cc7 -#define MVNETA_RGMII_SERDES_PROTO 0x0667 +#define MVNETA_QSGMII_SERDES_PROTO 0x0667 #define MVNETA_TYPE_PRIO 0x24bc #define MVNETA_FORCE_UNI BIT(21) #define MVNETA_TXQ_CMD_1 0x24e4 @@ -2721,29 +2721,44 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp, } /* Power up the port */ -static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) +static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) { - u32 val; + u32 ctrl; /* MAC Cause register should be cleared */ mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0); - if (phy_mode == PHY_INTERFACE_MODE_SGMII) - mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); - else - mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_RGMII_SERDES_PROTO); + ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2); - val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); - - val |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; + /* Even though it might look weird, when we're configured in + * SGMII or QSGMII mode, the RGMII bit needs to be set. + */ + switch(phy_mode) { + case PHY_INTERFACE_MODE_QSGMII: + mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO); + ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; + break; + case PHY_INTERFACE_MODE_SGMII: + mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); + ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + ctrl |= MVNETA_GMAC2_PORT_RGMII; + break; + default: + return -EINVAL; + } /* Cancel Port Reset */ - val &= ~MVNETA_GMAC2_PORT_RESET; - mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); + ctrl &= ~MVNETA_GMAC2_PORT_RESET; + mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl); while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) & MVNETA_GMAC2_PORT_RESET) != 0) continue; + + return 0; } /* Device initialization routine */ @@ -2854,7 +2869,12 @@ static int mvneta_probe(struct platform_device *pdev) dev_err(&pdev->dev, "can't init eth hal\n"); goto err_free_stats; } - mvneta_port_power_up(pp, phy_mode); + + err = mvneta_port_power_up(pp, phy_mode); + if (err < 0) { + dev_err(&pdev->dev, "can't power up port\n"); + goto err_deinit; + } dram_target_info = mv_mbus_dram_info(); if (dram_target_info) |