summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/micrel/ks8851_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/micrel/ks8851_common.c')
-rw-r--r--drivers/net/ethernet/micrel/ks8851_common.c1193
1 files changed, 1193 insertions, 0 deletions
diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c
new file mode 100644
index 000000000000..d65872172229
--- /dev/null
+++ b/drivers/net/ethernet/micrel/ks8851_common.c
@@ -0,0 +1,1193 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* drivers/net/ethernet/micrel/ks8851.c
+ *
+ * Copyright 2009 Simtec Electronics
+ * http://www.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DEBUG
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/cache.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/of_net.h>
+
+#include "ks8851.h"
+
+/**
+ * ks8851_lock - register access lock
+ * @ks: The chip state
+ * @flags: Spinlock flags
+ *
+ * Claim chip register access lock
+ */
+static void ks8851_lock(struct ks8851_net *ks, unsigned long *flags)
+{
+ ks->lock(ks, flags);
+}
+
+/**
+ * ks8851_unlock - register access unlock
+ * @ks: The chip state
+ * @flags: Spinlock flags
+ *
+ * Release chip register access lock
+ */
+static void ks8851_unlock(struct ks8851_net *ks, unsigned long *flags)
+{
+ ks->unlock(ks, flags);
+}
+
+/**
+ * ks8851_wrreg16 - write 16bit register value to chip
+ * @ks: The chip state
+ * @reg: The register address
+ * @val: The value to write
+ *
+ * Issue a write to put the value @val into the register specified in @reg.
+ */
+static void ks8851_wrreg16(struct ks8851_net *ks, unsigned int reg,
+ unsigned int val)
+{
+ ks->wrreg16(ks, reg, val);
+}
+
+/**
+ * ks8851_rdreg16 - read 16 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 16bit register from the chip, returning the result
+ */
+static unsigned int ks8851_rdreg16(struct ks8851_net *ks,
+ unsigned int reg)
+{
+ return ks->rdreg16(ks, reg);
+}
+
+/**
+ * ks8851_soft_reset - issue one of the soft reset to the device
+ * @ks: The device state.
+ * @op: The bit(s) to set in the GRR
+ *
+ * Issue the relevant soft-reset command to the device's GRR register
+ * specified by @op.
+ *
+ * Note, the delays are in there as a caution to ensure that the reset
+ * has time to take effect and then complete. Since the datasheet does
+ * not currently specify the exact sequence, we have chosen something
+ * that seems to work with our device.
+ */
+static void ks8851_soft_reset(struct ks8851_net *ks, unsigned op)
+{
+ ks8851_wrreg16(ks, KS_GRR, op);
+ mdelay(1); /* wait a short time to effect reset */
+ ks8851_wrreg16(ks, KS_GRR, 0);
+ mdelay(1); /* wait for condition to clear */
+}
+
+/**
+ * ks8851_set_powermode - set power mode of the device
+ * @ks: The device state
+ * @pwrmode: The power mode value to write to KS_PMECR.
+ *
+ * Change the power mode of the chip.
+ */
+static void ks8851_set_powermode(struct ks8851_net *ks, unsigned pwrmode)
+{
+ unsigned pmecr;
+
+ netif_dbg(ks, hw, ks->netdev, "setting power mode %d\n", pwrmode);
+
+ pmecr = ks8851_rdreg16(ks, KS_PMECR);
+ pmecr &= ~PMECR_PM_MASK;
+ pmecr |= pwrmode;
+
+ ks8851_wrreg16(ks, KS_PMECR, pmecr);
+}
+
+/**
+ * ks8851_write_mac_addr - write mac address to device registers
+ * @dev: The network device
+ *
+ * Update the KS8851 MAC address registers from the address in @dev.
+ *
+ * This call assumes that the chip is not running, so there is no need to
+ * shutdown the RXQ process whilst setting this.
+*/
+static int ks8851_write_mac_addr(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ unsigned long flags;
+ u16 val;
+ int i;
+
+ ks8851_lock(ks, &flags);
+
+ /*
+ * Wake up chip in case it was powered off when stopped; otherwise,
+ * the first write to the MAC address does not take effect.
+ */
+ ks8851_set_powermode(ks, PMECR_PM_NORMAL);
+
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ val = (dev->dev_addr[i] << 8) | dev->dev_addr[i + 1];
+ ks8851_wrreg16(ks, KS_MAR(i), val);
+ }
+
+ if (!netif_running(dev))
+ ks8851_set_powermode(ks, PMECR_PM_SOFTDOWN);
+
+ ks8851_unlock(ks, &flags);
+
+ return 0;
+}
+
+/**
+ * ks8851_read_mac_addr - read mac address from device registers
+ * @dev: The network device
+ *
+ * Update our copy of the KS8851 MAC address from the registers of @dev.
+*/
+static void ks8851_read_mac_addr(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ unsigned long flags;
+ u16 reg;
+ int i;
+
+ ks8851_lock(ks, &flags);
+
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ reg = ks8851_rdreg16(ks, KS_MAR(i));
+ dev->dev_addr[i] = reg >> 8;
+ dev->dev_addr[i + 1] = reg & 0xff;
+ }
+
+ ks8851_unlock(ks, &flags);
+}
+
+/**
+ * ks8851_init_mac - initialise the mac address
+ * @ks: The device structure
+ * @np: The device node pointer
+ *
+ * Get or create the initial mac address for the device and then set that
+ * into the station address register. A mac address supplied in the device
+ * tree takes precedence. Otherwise, if there is an EEPROM present, then
+ * we try that. If no valid mac address is found we use eth_random_addr()
+ * to create a new one.
+ */
+static void ks8851_init_mac(struct ks8851_net *ks, struct device_node *np)
+{
+ struct net_device *dev = ks->netdev;
+ const u8 *mac_addr;
+
+ mac_addr = of_get_mac_address(np);
+ if (!IS_ERR(mac_addr)) {
+ ether_addr_copy(dev->dev_addr, mac_addr);
+ ks8851_write_mac_addr(dev);
+ return;
+ }
+
+ if (ks->rc_ccr & CCR_EEPROM) {
+ ks8851_read_mac_addr(dev);
+ if (is_valid_ether_addr(dev->dev_addr))
+ return;
+
+ netdev_err(ks->netdev, "invalid mac address read %pM\n",
+ dev->dev_addr);
+ }
+
+ eth_hw_addr_random(dev);
+ ks8851_write_mac_addr(dev);
+}
+
+/**
+ * ks8851_dbg_dumpkkt - dump initial packet contents to debug
+ * @ks: The device state
+ * @rxpkt: The data for the received packet
+ *
+ * Dump the initial data from the packet to dev_dbg().
+ */
+static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt)
+{
+ netdev_dbg(ks->netdev,
+ "pkt %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x\n",
+ rxpkt[4], rxpkt[5], rxpkt[6], rxpkt[7],
+ rxpkt[8], rxpkt[9], rxpkt[10], rxpkt[11],
+ rxpkt[12], rxpkt[13], rxpkt[14], rxpkt[15]);
+}
+
+/**
+ * ks8851_rx_skb - receive skbuff
+ * @ks: The device state.
+ * @skb: The skbuff
+ */
+static void ks8851_rx_skb(struct ks8851_net *ks, struct sk_buff *skb)
+{
+ ks->rx_skb(ks, skb);
+}
+
+/**
+ * ks8851_rx_pkts - receive packets from the host
+ * @ks: The device information.
+ *
+ * This is called from the IRQ work queue when the system detects that there
+ * are packets in the receive queue. Find out how many packets there are and
+ * read them from the FIFO.
+ */
+static void ks8851_rx_pkts(struct ks8851_net *ks)
+{
+ struct sk_buff *skb;
+ unsigned rxfc;
+ unsigned rxlen;
+ unsigned rxstat;
+ u8 *rxpkt;
+
+ rxfc = (ks8851_rdreg16(ks, KS_RXFCTR) >> 8) & 0xff;
+
+ netif_dbg(ks, rx_status, ks->netdev,
+ "%s: %d packets\n", __func__, rxfc);
+
+ /* Currently we're issuing a read per packet, but we could possibly
+ * improve the code by issuing a single read, getting the receive
+ * header, allocating the packet and then reading the packet data
+ * out in one go.
+ *
+ * This form of operation would require us to hold the SPI bus'
+ * chipselect low during the entie transaction to avoid any
+ * reset to the data stream coming from the chip.
+ */
+
+ for (; rxfc != 0; rxfc--) {
+ rxstat = ks8851_rdreg16(ks, KS_RXFHSR);
+ rxlen = ks8851_rdreg16(ks, KS_RXFHBCR) & RXFHBCR_CNT_MASK;
+
+ netif_dbg(ks, rx_status, ks->netdev,
+ "rx: stat 0x%04x, len 0x%04x\n", rxstat, rxlen);
+
+ /* the length of the packet includes the 32bit CRC */
+
+ /* set dma read address */
+ ks8851_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI | 0x00);
+
+ /* start DMA access */
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
+
+ if (rxlen > 4) {
+ unsigned int rxalign;
+
+ rxlen -= 4;
+ rxalign = ALIGN(rxlen, 4);
+ skb = netdev_alloc_skb_ip_align(ks->netdev, rxalign);
+ if (skb) {
+
+ /* 4 bytes of status header + 4 bytes of
+ * garbage: we put them before ethernet
+ * header, so that they are copied,
+ * but ignored.
+ */
+
+ rxpkt = skb_put(skb, rxlen) - 8;
+
+ ks->rdfifo(ks, rxpkt, rxalign + 8);
+
+ if (netif_msg_pktdata(ks))
+ ks8851_dbg_dumpkkt(ks, rxpkt);
+
+ skb->protocol = eth_type_trans(skb, ks->netdev);
+ ks8851_rx_skb(ks, skb);
+
+ ks->netdev->stats.rx_packets++;
+ ks->netdev->stats.rx_bytes += rxlen;
+ }
+ }
+
+ /* end DMA access and dequeue packet */
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_RRXEF);
+ }
+}
+
+/**
+ * ks8851_irq - IRQ handler for dealing with interrupt requests
+ * @irq: IRQ number
+ * @_ks: cookie
+ *
+ * This handler is invoked when the IRQ line asserts to find out what happened.
+ * As we cannot allow ourselves to sleep in HARDIRQ context, this handler runs
+ * in thread context.
+ *
+ * Read the interrupt status, work out what needs to be done and then clear
+ * any of the interrupts that are not needed.
+ */
+static irqreturn_t ks8851_irq(int irq, void *_ks)
+{
+ struct ks8851_net *ks = _ks;
+ unsigned handled = 0;
+ unsigned long flags;
+ unsigned int status;
+
+ ks8851_lock(ks, &flags);
+
+ status = ks8851_rdreg16(ks, KS_ISR);
+
+ netif_dbg(ks, intr, ks->netdev,
+ "%s: status 0x%04x\n", __func__, status);
+
+ if (status & IRQ_LCI)
+ handled |= IRQ_LCI;
+
+ if (status & IRQ_LDI) {
+ u16 pmecr = ks8851_rdreg16(ks, KS_PMECR);
+ pmecr &= ~PMECR_WKEVT_MASK;
+ ks8851_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK);
+
+ handled |= IRQ_LDI;
+ }
+
+ if (status & IRQ_RXPSI)
+ handled |= IRQ_RXPSI;
+
+ if (status & IRQ_TXI) {
+ handled |= IRQ_TXI;
+
+ /* no lock here, tx queue should have been stopped */
+
+ /* update our idea of how much tx space is available to the
+ * system */
+ ks->tx_space = ks8851_rdreg16(ks, KS_TXMIR);
+
+ netif_dbg(ks, intr, ks->netdev,
+ "%s: txspace %d\n", __func__, ks->tx_space);
+ }
+
+ if (status & IRQ_RXI)
+ handled |= IRQ_RXI;
+
+ if (status & IRQ_SPIBEI) {
+ netdev_err(ks->netdev, "%s: spi bus error\n", __func__);
+ handled |= IRQ_SPIBEI;
+ }
+
+ ks8851_wrreg16(ks, KS_ISR, handled);
+
+ if (status & IRQ_RXI) {
+ /* the datasheet says to disable the rx interrupt during
+ * packet read-out, however we're masking the interrupt
+ * from the device so do not bother masking just the RX
+ * from the device. */
+
+ ks8851_rx_pkts(ks);
+ }
+
+ /* if something stopped the rx process, probably due to wanting
+ * to change the rx settings, then do something about restarting
+ * it. */
+ if (status & IRQ_RXPSI) {
+ struct ks8851_rxctrl *rxc = &ks->rxctrl;
+
+ /* update the multicast hash table */
+ ks8851_wrreg16(ks, KS_MAHTR0, rxc->mchash[0]);
+ ks8851_wrreg16(ks, KS_MAHTR1, rxc->mchash[1]);
+ ks8851_wrreg16(ks, KS_MAHTR2, rxc->mchash[2]);
+ ks8851_wrreg16(ks, KS_MAHTR3, rxc->mchash[3]);
+
+ ks8851_wrreg16(ks, KS_RXCR2, rxc->rxcr2);
+ ks8851_wrreg16(ks, KS_RXCR1, rxc->rxcr1);
+ }
+
+ ks8851_unlock(ks, &flags);
+
+ if (status & IRQ_LCI)
+ mii_check_link(&ks->mii);
+
+ if (status & IRQ_TXI)
+ netif_wake_queue(ks->netdev);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ks8851_flush_tx_work - flush outstanding TX work
+ * @ks: The device state
+ */
+static void ks8851_flush_tx_work(struct ks8851_net *ks)
+{
+ if (ks->flush_tx_work)
+ ks->flush_tx_work(ks);
+}
+
+/**
+ * ks8851_net_open - open network device
+ * @dev: The network device being opened.
+ *
+ * Called when the network device is marked active, such as a user executing
+ * 'ifconfig up' on the device.
+ */
+static int ks8851_net_open(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ unsigned long flags;
+ int ret;
+
+ ret = request_threaded_irq(dev->irq, NULL, ks8851_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ dev->name, ks);
+ if (ret < 0) {
+ netdev_err(dev, "failed to get irq\n");
+ return ret;
+ }
+
+ /* lock the card, even if we may not actually be doing anything
+ * else at the moment */
+ ks8851_lock(ks, &flags);
+
+ netif_dbg(ks, ifup, ks->netdev, "opening\n");
+
+ /* bring chip out of any power saving mode it was in */
+ ks8851_set_powermode(ks, PMECR_PM_NORMAL);
+
+ /* issue a soft reset to the RX/TX QMU to put it into a known
+ * state. */
+ ks8851_soft_reset(ks, GRR_QMU);
+
+ /* setup transmission parameters */
+
+ ks8851_wrreg16(ks, KS_TXCR, (TXCR_TXE | /* enable transmit process */
+ TXCR_TXPE | /* pad to min length */
+ TXCR_TXCRC | /* add CRC */
+ TXCR_TXFCE)); /* enable flow control */
+
+ /* auto-increment tx data, reset tx pointer */
+ ks8851_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI);
+
+ /* setup receiver control */
+
+ ks8851_wrreg16(ks, KS_RXCR1, (RXCR1_RXPAFMA | /* from mac filter */
+ RXCR1_RXFCE | /* enable flow control */
+ RXCR1_RXBE | /* broadcast enable */
+ RXCR1_RXUE | /* unicast enable */
+ RXCR1_RXE)); /* enable rx block */
+
+ /* transfer entire frames out in one go */
+ ks8851_wrreg16(ks, KS_RXCR2, RXCR2_SRDBL_FRAME);
+
+ /* set receive counter timeouts */
+ ks8851_wrreg16(ks, KS_RXDTTR, 1000); /* 1ms after first frame to IRQ */
+ ks8851_wrreg16(ks, KS_RXDBCTR, 4096); /* >4Kbytes in buffer to IRQ */
+ ks8851_wrreg16(ks, KS_RXFCTR, 10); /* 10 frames to IRQ */
+
+ ks->rc_rxqcr = (RXQCR_RXFCTE | /* IRQ on frame count exceeded */
+ RXQCR_RXDBCTE | /* IRQ on byte count exceeded */
+ RXQCR_RXDTTE); /* IRQ on time exceeded */
+
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+
+ /* clear then enable interrupts */
+ ks8851_wrreg16(ks, KS_ISR, ks->rc_ier);
+ ks8851_wrreg16(ks, KS_IER, ks->rc_ier);
+
+ netif_start_queue(ks->netdev);
+
+ netif_dbg(ks, ifup, ks->netdev, "network device up\n");
+
+ ks8851_unlock(ks, &flags);
+ mii_check_link(&ks->mii);
+ return 0;
+}
+
+/**
+ * ks8851_net_stop - close network device
+ * @dev: The device being closed.
+ *
+ * Called to close down a network device which has been active. Cancell any
+ * work, shutdown the RX and TX process and then place the chip into a low
+ * power state whilst it is not being used.
+ */
+static int ks8851_net_stop(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ unsigned long flags;
+
+ netif_info(ks, ifdown, dev, "shutting down\n");
+
+ netif_stop_queue(dev);
+
+ ks8851_lock(ks, &flags);
+ /* turn off the IRQs and ack any outstanding */
+ ks8851_wrreg16(ks, KS_IER, 0x0000);
+ ks8851_wrreg16(ks, KS_ISR, 0xffff);
+ ks8851_unlock(ks, &flags);
+
+ /* stop any outstanding work */
+ ks8851_flush_tx_work(ks);
+ flush_work(&ks->rxctrl_work);
+
+ ks8851_lock(ks, &flags);
+ /* shutdown RX process */
+ ks8851_wrreg16(ks, KS_RXCR1, 0x0000);
+
+ /* shutdown TX process */
+ ks8851_wrreg16(ks, KS_TXCR, 0x0000);
+
+ /* set powermode to soft power down to save power */
+ ks8851_set_powermode(ks, PMECR_PM_SOFTDOWN);
+ ks8851_unlock(ks, &flags);
+
+ /* ensure any queued tx buffers are dumped */
+ while (!skb_queue_empty(&ks->txq)) {
+ struct sk_buff *txb = skb_dequeue(&ks->txq);
+
+ netif_dbg(ks, ifdown, ks->netdev,
+ "%s: freeing txb %p\n", __func__, txb);
+
+ dev_kfree_skb(txb);
+ }
+
+ free_irq(dev->irq, ks);
+
+ return 0;
+}
+
+/**
+ * ks8851_start_xmit - transmit packet
+ * @skb: The buffer to transmit
+ * @dev: The device used to transmit the packet.
+ *
+ * Called by the network layer to transmit the @skb. Queue the packet for
+ * the device and schedule the necessary work to transmit the packet when
+ * it is free.
+ *
+ * We do this to firstly avoid sleeping with the network device locked,
+ * and secondly so we can round up more than one packet to transmit which
+ * means we can try and avoid generating too many transmit done interrupts.
+ */
+static netdev_tx_t ks8851_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+
+ return ks->start_xmit(skb, dev);
+}
+
+/**
+ * ks8851_rxctrl_work - work handler to change rx mode
+ * @work: The work structure this belongs to.
+ *
+ * Lock the device and issue the necessary changes to the receive mode from
+ * the network device layer. This is done so that we can do this without
+ * having to sleep whilst holding the network device lock.
+ *
+ * Since the recommendation from Micrel is that the RXQ is shutdown whilst the
+ * receive parameters are programmed, we issue a write to disable the RXQ and
+ * then wait for the interrupt handler to be triggered once the RXQ shutdown is
+ * complete. The interrupt handler then writes the new values into the chip.
+ */
+static void ks8851_rxctrl_work(struct work_struct *work)
+{
+ struct ks8851_net *ks = container_of(work, struct ks8851_net, rxctrl_work);
+ unsigned long flags;
+
+ ks8851_lock(ks, &flags);
+
+ /* need to shutdown RXQ before modifying filter parameters */
+ ks8851_wrreg16(ks, KS_RXCR1, 0x00);
+
+ ks8851_unlock(ks, &flags);
+}
+
+static void ks8851_set_rx_mode(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ struct ks8851_rxctrl rxctrl;
+
+ memset(&rxctrl, 0, sizeof(rxctrl));
+
+ if (dev->flags & IFF_PROMISC) {
+ /* interface to receive everything */
+
+ rxctrl.rxcr1 = RXCR1_RXAE | RXCR1_RXINVF;
+ } else if (dev->flags & IFF_ALLMULTI) {
+ /* accept all multicast packets */
+
+ rxctrl.rxcr1 = (RXCR1_RXME | RXCR1_RXAE |
+ RXCR1_RXPAFMA | RXCR1_RXMAFMA);
+ } else if (dev->flags & IFF_MULTICAST && !netdev_mc_empty(dev)) {
+ struct netdev_hw_addr *ha;
+ u32 crc;
+
+ /* accept some multicast */
+
+ netdev_for_each_mc_addr(ha, dev) {
+ crc = ether_crc(ETH_ALEN, ha->addr);
+ crc >>= (32 - 6); /* get top six bits */
+
+ rxctrl.mchash[crc >> 4] |= (1 << (crc & 0xf));
+ }
+
+ rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXPAFMA;
+ } else {
+ /* just accept broadcast / unicast */
+ rxctrl.rxcr1 = RXCR1_RXPAFMA;
+ }
+
+ rxctrl.rxcr1 |= (RXCR1_RXUE | /* unicast enable */
+ RXCR1_RXBE | /* broadcast enable */
+ RXCR1_RXE | /* RX process enable */
+ RXCR1_RXFCE); /* enable flow control */
+
+ rxctrl.rxcr2 |= RXCR2_SRDBL_FRAME;
+
+ /* schedule work to do the actual set of the data if needed */
+
+ spin_lock(&ks->statelock);
+
+ if (memcmp(&rxctrl, &ks->rxctrl, sizeof(rxctrl)) != 0) {
+ memcpy(&ks->rxctrl, &rxctrl, sizeof(ks->rxctrl));
+ schedule_work(&ks->rxctrl_work);
+ }
+
+ spin_unlock(&ks->statelock);
+}
+
+static int ks8851_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *sa = addr;
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ if (!is_valid_ether_addr(sa->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
+ return ks8851_write_mac_addr(dev);
+}
+
+static int ks8851_net_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL);
+}
+
+static const struct net_device_ops ks8851_netdev_ops = {
+ .ndo_open = ks8851_net_open,
+ .ndo_stop = ks8851_net_stop,
+ .ndo_do_ioctl = ks8851_net_ioctl,
+ .ndo_start_xmit = ks8851_start_xmit,
+ .ndo_set_mac_address = ks8851_set_mac_address,
+ .ndo_set_rx_mode = ks8851_set_rx_mode,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/* ethtool support */
+
+static void ks8851_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *di)
+{
+ strlcpy(di->driver, "KS8851", sizeof(di->driver));
+ strlcpy(di->version, "1.00", sizeof(di->version));
+ strlcpy(di->bus_info, dev_name(dev->dev.parent), sizeof(di->bus_info));
+}
+
+static u32 ks8851_get_msglevel(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return ks->msg_enable;
+}
+
+static void ks8851_set_msglevel(struct net_device *dev, u32 to)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ ks->msg_enable = to;
+}
+
+static int ks8851_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+
+ mii_ethtool_get_link_ksettings(&ks->mii, cmd);
+
+ return 0;
+}
+
+static int ks8851_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_ethtool_set_link_ksettings(&ks->mii, cmd);
+}
+
+static u32 ks8851_get_link(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_link_ok(&ks->mii);
+}
+
+static int ks8851_nway_reset(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_nway_restart(&ks->mii);
+}
+
+/* EEPROM support */
+
+static void ks8851_eeprom_regread(struct eeprom_93cx6 *ee)
+{
+ struct ks8851_net *ks = ee->data;
+ unsigned val;
+
+ val = ks8851_rdreg16(ks, KS_EEPCR);
+
+ ee->reg_data_out = (val & EEPCR_EESB) ? 1 : 0;
+ ee->reg_data_clock = (val & EEPCR_EESCK) ? 1 : 0;
+ ee->reg_chip_select = (val & EEPCR_EECS) ? 1 : 0;
+}
+
+static void ks8851_eeprom_regwrite(struct eeprom_93cx6 *ee)
+{
+ struct ks8851_net *ks = ee->data;
+ unsigned val = EEPCR_EESA; /* default - eeprom access on */
+
+ if (ee->drive_data)
+ val |= EEPCR_EESRWA;
+ if (ee->reg_data_in)
+ val |= EEPCR_EEDO;
+ if (ee->reg_data_clock)
+ val |= EEPCR_EESCK;
+ if (ee->reg_chip_select)
+ val |= EEPCR_EECS;
+
+ ks8851_wrreg16(ks, KS_EEPCR, val);
+}
+
+/**
+ * ks8851_eeprom_claim - claim device EEPROM and activate the interface
+ * @ks: The network device state.
+ *
+ * Check for the presence of an EEPROM, and then activate software access
+ * to the device.
+ */
+static int ks8851_eeprom_claim(struct ks8851_net *ks)
+{
+ /* start with clock low, cs high */
+ ks8851_wrreg16(ks, KS_EEPCR, EEPCR_EESA | EEPCR_EECS);
+ return 0;
+}
+
+/**
+ * ks8851_eeprom_release - release the EEPROM interface
+ * @ks: The device state
+ *
+ * Release the software access to the device EEPROM
+ */
+static void ks8851_eeprom_release(struct ks8851_net *ks)
+{
+ unsigned val = ks8851_rdreg16(ks, KS_EEPCR);
+
+ ks8851_wrreg16(ks, KS_EEPCR, val & ~EEPCR_EESA);
+}
+
+#define KS_EEPROM_MAGIC (0x00008851)
+
+static int ks8851_set_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ int offset = ee->offset;
+ unsigned long flags;
+ int len = ee->len;
+ u16 tmp;
+
+ /* currently only support byte writing */
+ if (len != 1)
+ return -EINVAL;
+
+ if (ee->magic != KS_EEPROM_MAGIC)
+ return -EINVAL;
+
+ if (!(ks->rc_ccr & CCR_EEPROM))
+ return -ENOENT;
+
+ ks8851_lock(ks, &flags);
+
+ ks8851_eeprom_claim(ks);
+
+ eeprom_93cx6_wren(&ks->eeprom, true);
+
+ /* ethtool currently only supports writing bytes, which means
+ * we have to read/modify/write our 16bit EEPROMs */
+
+ eeprom_93cx6_read(&ks->eeprom, offset/2, &tmp);
+
+ if (offset & 1) {
+ tmp &= 0xff;
+ tmp |= *data << 8;
+ } else {
+ tmp &= 0xff00;
+ tmp |= *data;
+ }
+
+ eeprom_93cx6_write(&ks->eeprom, offset/2, tmp);
+ eeprom_93cx6_wren(&ks->eeprom, false);
+
+ ks8851_eeprom_release(ks);
+ ks8851_unlock(ks, &flags);
+
+ return 0;
+}
+
+static int ks8851_get_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ int offset = ee->offset;
+ unsigned long flags;
+ int len = ee->len;
+
+ /* must be 2 byte aligned */
+ if (len & 1 || offset & 1)
+ return -EINVAL;
+
+ if (!(ks->rc_ccr & CCR_EEPROM))
+ return -ENOENT;
+
+ ks8851_lock(ks, &flags);
+
+ ks8851_eeprom_claim(ks);
+
+ ee->magic = KS_EEPROM_MAGIC;
+
+ eeprom_93cx6_multiread(&ks->eeprom, offset/2, (__le16 *)data, len/2);
+ ks8851_eeprom_release(ks);
+ ks8851_unlock(ks, &flags);
+
+ return 0;
+}
+
+static int ks8851_get_eeprom_len(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+
+ /* currently, we assume it is an 93C46 attached, so return 128 */
+ return ks->rc_ccr & CCR_EEPROM ? 128 : 0;
+}
+
+static const struct ethtool_ops ks8851_ethtool_ops = {
+ .get_drvinfo = ks8851_get_drvinfo,
+ .get_msglevel = ks8851_get_msglevel,
+ .set_msglevel = ks8851_set_msglevel,
+ .get_link = ks8851_get_link,
+ .nway_reset = ks8851_nway_reset,
+ .get_eeprom_len = ks8851_get_eeprom_len,
+ .get_eeprom = ks8851_get_eeprom,
+ .set_eeprom = ks8851_set_eeprom,
+ .get_link_ksettings = ks8851_get_link_ksettings,
+ .set_link_ksettings = ks8851_set_link_ksettings,
+};
+
+/* MII interface controls */
+
+/**
+ * ks8851_phy_reg - convert MII register into a KS8851 register
+ * @reg: MII register number.
+ *
+ * Return the KS8851 register number for the corresponding MII PHY register
+ * if possible. Return zero if the MII register has no direct mapping to the
+ * KS8851 register set.
+ */
+static int ks8851_phy_reg(int reg)
+{
+ switch (reg) {
+ case MII_BMCR:
+ return KS_P1MBCR;
+ case MII_BMSR:
+ return KS_P1MBSR;
+ case MII_PHYSID1:
+ return KS_PHY1ILR;
+ case MII_PHYSID2:
+ return KS_PHY1IHR;
+ case MII_ADVERTISE:
+ return KS_P1ANAR;
+ case MII_LPA:
+ return KS_P1ANLPR;
+ }
+
+ return 0x0;
+}
+
+/**
+ * ks8851_phy_read - MII interface PHY register read.
+ * @dev: The network device the PHY is on.
+ * @phy_addr: Address of PHY (ignored as we only have one)
+ * @reg: The register to read.
+ *
+ * This call reads data from the PHY register specified in @reg. Since the
+ * device does not support all the MII registers, the non-existent values
+ * are always returned as zero.
+ *
+ * We return zero for unsupported registers as the MII code does not check
+ * the value returned for any error status, and simply returns it to the
+ * caller. The mii-tool that the driver was tested with takes any -ve error
+ * as real PHY capabilities, thus displaying incorrect data to the user.
+ */
+static int ks8851_phy_read(struct net_device *dev, int phy_addr, int reg)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ unsigned long flags;
+ int ksreg;
+ int result;
+
+ ksreg = ks8851_phy_reg(reg);
+ if (!ksreg)
+ return 0x0; /* no error return allowed, so use zero */
+
+ ks8851_lock(ks, &flags);
+ result = ks8851_rdreg16(ks, ksreg);
+ ks8851_unlock(ks, &flags);
+
+ return result;
+}
+
+static void ks8851_phy_write(struct net_device *dev,
+ int phy, int reg, int value)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ unsigned long flags;
+ int ksreg;
+
+ ksreg = ks8851_phy_reg(reg);
+ if (ksreg) {
+ ks8851_lock(ks, &flags);
+ ks8851_wrreg16(ks, ksreg, value);
+ ks8851_unlock(ks, &flags);
+ }
+}
+
+/**
+ * ks8851_read_selftest - read the selftest memory info.
+ * @ks: The device state
+ *
+ * Read and check the TX/RX memory selftest information.
+ */
+static int ks8851_read_selftest(struct ks8851_net *ks)
+{
+ unsigned both_done = MBIR_TXMBF | MBIR_RXMBF;
+ int ret = 0;
+ unsigned rd;
+
+ rd = ks8851_rdreg16(ks, KS_MBIR);
+
+ if ((rd & both_done) != both_done) {
+ netdev_warn(ks->netdev, "Memory selftest not finished\n");
+ return 0;
+ }
+
+ if (rd & MBIR_TXMBFA) {
+ netdev_err(ks->netdev, "TX memory selftest fail\n");
+ ret |= 1;
+ }
+
+ if (rd & MBIR_RXMBFA) {
+ netdev_err(ks->netdev, "RX memory selftest fail\n");
+ ret |= 2;
+ }
+
+ return 0;
+}
+
+/* driver bus management functions */
+
+#ifdef CONFIG_PM_SLEEP
+
+int ks8851_suspend(struct device *dev)
+{
+ struct ks8851_net *ks = dev_get_drvdata(dev);
+ struct net_device *netdev = ks->netdev;
+
+ if (netif_running(netdev)) {
+ netif_device_detach(netdev);
+ ks8851_net_stop(netdev);
+ }
+
+ return 0;
+}
+
+int ks8851_resume(struct device *dev)
+{
+ struct ks8851_net *ks = dev_get_drvdata(dev);
+ struct net_device *netdev = ks->netdev;
+
+ if (netif_running(netdev)) {
+ ks8851_net_open(netdev);
+ netif_device_attach(netdev);
+ }
+
+ return 0;
+}
+#endif
+
+int ks8851_probe_common(struct net_device *netdev, struct device *dev,
+ int msg_en)
+{
+ struct ks8851_net *ks = netdev_priv(netdev);
+ unsigned cider;
+ int gpio;
+ int ret;
+
+ ks->netdev = netdev;
+ ks->tx_space = 6144;
+
+ gpio = of_get_named_gpio_flags(dev->of_node, "reset-gpios", 0, NULL);
+ if (gpio == -EPROBE_DEFER)
+ return gpio;
+
+ ks->gpio = gpio;
+ if (gpio_is_valid(gpio)) {
+ ret = devm_gpio_request_one(dev, gpio,
+ GPIOF_OUT_INIT_LOW, "ks8851_rst_n");
+ if (ret) {
+ dev_err(dev, "reset gpio request failed\n");
+ return ret;
+ }
+ }
+
+ ks->vdd_io = devm_regulator_get(dev, "vdd-io");
+ if (IS_ERR(ks->vdd_io)) {
+ ret = PTR_ERR(ks->vdd_io);
+ goto err_reg_io;
+ }
+
+ ret = regulator_enable(ks->vdd_io);
+ if (ret) {
+ dev_err(dev, "regulator vdd_io enable fail: %d\n", ret);
+ goto err_reg_io;
+ }
+
+ ks->vdd_reg = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(ks->vdd_reg)) {
+ ret = PTR_ERR(ks->vdd_reg);
+ goto err_reg;
+ }
+
+ ret = regulator_enable(ks->vdd_reg);
+ if (ret) {
+ dev_err(dev, "regulator vdd enable fail: %d\n", ret);
+ goto err_reg;
+ }
+
+ if (gpio_is_valid(gpio)) {
+ usleep_range(10000, 11000);
+ gpio_set_value(gpio, 1);
+ }
+
+ spin_lock_init(&ks->statelock);
+
+ INIT_WORK(&ks->rxctrl_work, ks8851_rxctrl_work);
+
+ /* setup EEPROM state */
+ ks->eeprom.data = ks;
+ ks->eeprom.width = PCI_EEPROM_WIDTH_93C46;
+ ks->eeprom.register_read = ks8851_eeprom_regread;
+ ks->eeprom.register_write = ks8851_eeprom_regwrite;
+
+ /* setup mii state */
+ ks->mii.dev = netdev;
+ ks->mii.phy_id = 1,
+ ks->mii.phy_id_mask = 1;
+ ks->mii.reg_num_mask = 0xf;
+ ks->mii.mdio_read = ks8851_phy_read;
+ ks->mii.mdio_write = ks8851_phy_write;
+
+ dev_info(dev, "message enable is %d\n", msg_en);
+
+ /* set the default message enable */
+ ks->msg_enable = netif_msg_init(msg_en, NETIF_MSG_DRV |
+ NETIF_MSG_PROBE |
+ NETIF_MSG_LINK);
+
+ skb_queue_head_init(&ks->txq);
+
+ netdev->ethtool_ops = &ks8851_ethtool_ops;
+ SET_NETDEV_DEV(netdev, dev);
+
+ dev_set_drvdata(dev, ks);
+
+ netif_carrier_off(ks->netdev);
+ netdev->if_port = IF_PORT_100BASET;
+ netdev->netdev_ops = &ks8851_netdev_ops;
+
+ /* issue a global soft reset to reset the device. */
+ ks8851_soft_reset(ks, GRR_GSR);
+
+ /* simple check for a valid chip being connected to the bus */
+ cider = ks8851_rdreg16(ks, KS_CIDER);
+ if ((cider & ~CIDER_REV_MASK) != CIDER_ID) {
+ dev_err(dev, "failed to read device ID\n");
+ ret = -ENODEV;
+ goto err_id;
+ }
+
+ /* cache the contents of the CCR register for EEPROM, etc. */
+ ks->rc_ccr = ks8851_rdreg16(ks, KS_CCR);
+
+ ks8851_read_selftest(ks);
+ ks8851_init_mac(ks, dev->of_node);
+
+ ret = register_netdev(netdev);
+ if (ret) {
+ dev_err(dev, "failed to register network device\n");
+ goto err_netdev;
+ }
+
+ netdev_info(netdev, "revision %d, MAC %pM, IRQ %d, %s EEPROM\n",
+ CIDER_REV_GET(cider), netdev->dev_addr, netdev->irq,
+ ks->rc_ccr & CCR_EEPROM ? "has" : "no");
+
+ return 0;
+
+err_netdev:
+err_id:
+ if (gpio_is_valid(gpio))
+ gpio_set_value(gpio, 0);
+ regulator_disable(ks->vdd_reg);
+err_reg:
+ regulator_disable(ks->vdd_io);
+err_reg_io:
+ return ret;
+}
+
+int ks8851_remove_common(struct device *dev)
+{
+ struct ks8851_net *priv = dev_get_drvdata(dev);
+
+ if (netif_msg_drv(priv))
+ dev_info(dev, "remove\n");
+
+ unregister_netdev(priv->netdev);
+ if (gpio_is_valid(priv->gpio))
+ gpio_set_value(priv->gpio, 0);
+ regulator_disable(priv->vdd_reg);
+ regulator_disable(priv->vdd_io);
+
+ return 0;
+}