diff options
Diffstat (limited to 'drivers/net/ewrk3.c')
| -rw-r--r-- | drivers/net/ewrk3.c | 60 |
1 files changed, 30 insertions, 30 deletions
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c index b987f9474730..78a1c425a9ab 100644 --- a/drivers/net/ewrk3.c +++ b/drivers/net/ewrk3.c @@ -359,13 +359,13 @@ struct net_device * __init ewrk3_probe(int unit) SET_MODULE_OWNER(dev); err = ewrk3_probe1(dev, dev->base_addr, dev->irq); - if (err) + if (err) goto out; return dev; out: free_netdev(dev); return ERR_PTR(err); - + } #endif @@ -378,7 +378,7 @@ static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq) /* Address PROM pattern */ err = isa_probe(dev, iobase); - if (err != 0) + if (err != 0) err = eisa_probe(dev, iobase); if (err) @@ -391,7 +391,7 @@ static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq) return err; } -static int __init +static int __init ewrk3_hw_init(struct net_device *dev, u_long iobase) { struct ewrk3_private *lp; @@ -435,19 +435,19 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase) printk("%s: Device has a bad on-board EEPROM.\n", dev->name); return -ENXIO; } - + EthwrkSignature(name, eeprom_image); - if (*name == '\0') + if (*name == '\0') return -ENXIO; dev->base_addr = iobase; - + if (iobase > 0x400) { outb(eisa_cr, EISA_CR); /* Rewrite the EISA CR */ } lemac = eeprom_image[EEPROM_CHIPVER]; cmr = inb(EWRK3_CMR); - + if (((lemac == LeMAC) && ((cmr & CMR_NO_EEPROM) != CMR_NO_EEPROM)) || ((lemac == LeMAC2) && !(cmr & CMR_HS))) { printk("%s: %s at %#4lx", dev->name, name, iobase); @@ -468,7 +468,7 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase) printk("%2.2x:", dev->dev_addr[i]); } printk("%2.2x,\n", dev->dev_addr[i]); - + if (status) { printk(" which has an EEPROM CRC error.\n"); return -ENXIO; @@ -490,7 +490,7 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase) if (eeprom_image[EEPROM_SETUP] & SETUP_DRAM) cmr |= CMR_DRAM; outb(cmr, EWRK3_CMR); - + cr = inb(EWRK3_CR); /* Set up the Control Register */ cr |= eeprom_image[EEPROM_SETUP] & SETUP_APD; if (cr & SETUP_APD) @@ -524,7 +524,7 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase) ** uncommenting this line. */ /* FORCE_2K_MODE; */ - + if (hard_strapped) { printk(" is hard strapped.\n"); } else if (mem_start) { @@ -544,44 +544,44 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase) lp->hard_strapped = hard_strapped; lp->led_mask = CR_LED; spin_lock_init(&lp->hw_lock); - + lp->mPage = 64; if (cmr & CMR_DRAM) lp->mPage <<= 1; /* 2 DRAMS on module */ - + sprintf(lp->adapter_name, "%s (%s)", name, dev->name); - + lp->irq_mask = ICR_TNEM | ICR_TXDM | ICR_RNEM | ICR_RXDM; - + if (!hard_strapped) { /* ** Enable EWRK3 board interrupts for autoprobing */ icr |= ICR_IE; /* Enable interrupts */ outb(icr, EWRK3_ICR); - + /* The DMA channel may be passed in on this parameter. */ dev->dma = 0; - + /* To auto-IRQ we enable the initialization-done and DMA err, interrupts. For now we will always get a DMA error. */ if (dev->irq < 2) { #ifndef MODULE u_char irqnum; unsigned long irq_mask; - + irq_mask = probe_irq_on(); - + /* ** Trigger a TNE interrupt. */ icr |= ICR_TNEM; outb(1, EWRK3_TDQ); /* Write to the TX done queue */ outb(icr, EWRK3_ICR); /* Unmask the TXD interrupt */ - + irqnum = irq[((icr & IRQ_SEL) >> 4)]; - + mdelay(20); dev->irq = probe_irq_off(irq_mask); if ((dev->irq) && (irqnum == dev->irq)) { @@ -622,12 +622,12 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase) SET_ETHTOOL_OPS(dev, ðtool_ops); dev->tx_timeout = ewrk3_timeout; dev->watchdog_timeo = QUEUE_PKT_TIMEOUT; - + dev->mem_start = 0; return 0; } - + static int ewrk3_open(struct net_device *dev) { @@ -732,14 +732,14 @@ static void ewrk3_init(struct net_device *dev) /* * Transmit timeout */ - + static void ewrk3_timeout(struct net_device *dev) { struct ewrk3_private *lp = netdev_priv(dev); u_char icr, csr; u_long iobase = dev->base_addr; - - if (!lp->hard_strapped) + + if (!lp->hard_strapped) { printk(KERN_WARNING"%s: transmit timed/locked out, status %04x, resetting.\n", dev->name, inb(EWRK3_CSR)); @@ -1108,7 +1108,7 @@ static int ewrk3_close(struct net_device *dev) u_char icr, csr; netif_stop_queue(dev); - + if (ewrk3_debug > 1) { printk("%s: Shutting down ethercard, status was %2.2x.\n", dev->name, inb(EWRK3_CSR)); @@ -1697,7 +1697,7 @@ static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) u_char addr[HASH_TABLE_LEN * ETH_ALEN]; u_short val[(HASH_TABLE_LEN * ETH_ALEN) >> 1]; }; - + union ewrk3_addr *tmp; /* All we handle are private IOCTLs */ @@ -1717,7 +1717,7 @@ static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) if (copy_to_user(ioc->data, tmp->addr, ioc->len)) status = -EFAULT; break; - + case EWRK3_SET_HWADDR: /* Set the hardware address */ if (capable(CAP_NET_ADMIN)) { spin_lock_irqsave(&lp->hw_lock, flags); @@ -1990,7 +1990,7 @@ module_init(ewrk3_init_module); #endif /* MODULE */ MODULE_LICENSE("GPL"); - + /* * Local variables: |