diff options
Diffstat (limited to 'drivers/net/fddi/defxx.c')
| -rw-r--r-- | drivers/net/fddi/defxx.c | 64 |
1 files changed, 38 insertions, 26 deletions
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c index c44eaf019dea..caed6eee289c 100644 --- a/drivers/net/fddi/defxx.c +++ b/drivers/net/fddi/defxx.c @@ -466,7 +466,8 @@ static void dfx_get_bars(struct device *bdev, *bar_len = (bar | PI_MEM_ADD_MASK_M) + 1; } else { *bar_start = base_addr; - *bar_len = PI_ESIC_K_CSR_IO_LEN; + *bar_len = PI_ESIC_K_CSR_IO_LEN + + PI_ESIC_K_BURST_HOLDOFF_LEN; } } if (dfx_bus_tc) { @@ -683,6 +684,9 @@ static void dfx_bus_init(struct net_device *dev) if (dfx_bus_eisa) { unsigned long base_addr = to_eisa_device(bdev)->base_addr; + /* Disable the board before fiddling with the decoders. */ + outb(0, base_addr + PI_ESIC_K_SLOT_CNTRL); + /* Get the interrupt level from the ESIC chip. */ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); val &= PI_CONFIG_STAT_0_M_IRQ; @@ -709,38 +713,46 @@ static void dfx_bus_init(struct net_device *dev) /* * Enable memory decoding (MEMCS0) and/or port decoding * (IOCS1/IOCS0) as appropriate in Function Control - * Register. One of the port chip selects seems to be - * used for the Burst Holdoff register, but this bit of - * documentation is missing and as yet it has not been - * determined which of the two. This is also the reason - * the size of the decoded port range is twice as large - * as one required by the PDQ. + * Register. IOCS0 is used for PDQ registers, taking 16 + * 32-bit words, while IOCS1 is used for the Burst Holdoff + * register, taking a single 32-bit word only. We use the + * slot-specific I/O range as per the ESIC spec, that is + * set bits 15:12 in the mask registers to mask them out. */ /* Set the decode range of the board. */ - val = ((bp->base.port >> 12) << PI_IO_CMP_V_SLOT); - outb(base_addr + PI_ESIC_K_IO_ADD_CMP_0_1, val); - outb(base_addr + PI_ESIC_K_IO_ADD_CMP_0_0, 0); - outb(base_addr + PI_ESIC_K_IO_ADD_CMP_1_1, val); - outb(base_addr + PI_ESIC_K_IO_ADD_CMP_1_0, 0); - val = PI_ESIC_K_CSR_IO_LEN - 1; - outb(base_addr + PI_ESIC_K_IO_ADD_MASK_0_1, (val >> 8) & 0xff); - outb(base_addr + PI_ESIC_K_IO_ADD_MASK_0_0, val & 0xff); - outb(base_addr + PI_ESIC_K_IO_ADD_MASK_1_1, (val >> 8) & 0xff); - outb(base_addr + PI_ESIC_K_IO_ADD_MASK_1_0, val & 0xff); + val = 0; + outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_0_1); + val = PI_DEFEA_K_CSR_IO; + outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_0_0); + + val = PI_IO_CMP_M_SLOT; + outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_0_1); + val = (PI_ESIC_K_CSR_IO_LEN - 1) & ~3; + outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_0_0); + + val = 0; + outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_1); + val = PI_DEFEA_K_BURST_HOLDOFF; + outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_0); + + val = PI_IO_CMP_M_SLOT; + outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_1); + val = (PI_ESIC_K_BURST_HOLDOFF_LEN - 1) & ~3; + outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_0); /* Enable the decoders. */ val = PI_FUNCTION_CNTRL_M_IOCS1 | PI_FUNCTION_CNTRL_M_IOCS0; if (dfx_use_mmio) val |= PI_FUNCTION_CNTRL_M_MEMCS0; - outb(base_addr + PI_ESIC_K_FUNCTION_CNTRL, val); + outb(val, base_addr + PI_ESIC_K_FUNCTION_CNTRL); /* * Enable access to the rest of the module * (including PDQ and packet memory). */ val = PI_SLOT_CNTRL_M_ENB; - outb(base_addr + PI_ESIC_K_SLOT_CNTRL, val); + outb(val, base_addr + PI_ESIC_K_SLOT_CNTRL); /* * Map PDQ registers into memory or port space. This is @@ -748,15 +760,15 @@ static void dfx_bus_init(struct net_device *dev) */ val = inb(base_addr + PI_DEFEA_K_BURST_HOLDOFF); if (dfx_use_mmio) - val |= PI_BURST_HOLDOFF_V_MEM_MAP; + val |= PI_BURST_HOLDOFF_M_MEM_MAP; else - val &= ~PI_BURST_HOLDOFF_V_MEM_MAP; - outb(base_addr + PI_DEFEA_K_BURST_HOLDOFF, val); + val &= ~PI_BURST_HOLDOFF_M_MEM_MAP; + outb(val, base_addr + PI_DEFEA_K_BURST_HOLDOFF); /* Enable interrupts at EISA bus interface chip (ESIC) */ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); val |= PI_CONFIG_STAT_0_M_INT_ENB; - outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, val); + outb(val, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); } if (dfx_bus_pci) { struct pci_dev *pdev = to_pci_dev(bdev); @@ -825,7 +837,7 @@ static void dfx_bus_uninit(struct net_device *dev) /* Disable interrupts at EISA bus interface chip (ESIC) */ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); val &= ~PI_CONFIG_STAT_0_M_INT_ENB; - outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, val); + outb(val, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); } if (dfx_bus_pci) { /* Disable interrupts at PCI bus interface chip (PFI) */ @@ -1917,7 +1929,7 @@ static irqreturn_t dfx_interrupt(int irq, void *dev_id) /* Disable interrupts at the ESIC */ status &= ~PI_CONFIG_STAT_0_M_INT_ENB; - outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, status); + outb(status, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); /* Call interrupt service routine for this adapter */ dfx_int_common(dev); @@ -1925,7 +1937,7 @@ static irqreturn_t dfx_interrupt(int irq, void *dev_id) /* Reenable interrupts at the ESIC */ status = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); status |= PI_CONFIG_STAT_0_M_INT_ENB; - outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, status); + outb(status, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); spin_unlock(&bp->lock); } |