summaryrefslogtreecommitdiffstats
path: root/drivers/net/gianfar.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/gianfar.c')
-rw-r--r--drivers/net/gianfar.c29
1 files changed, 27 insertions, 2 deletions
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index c52f3712ecd3..cee8ae714731 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -85,6 +85,7 @@
#include <linux/net_tstamp.h>
#include <asm/io.h>
+#include <asm/reg.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <linux/module.h>
@@ -928,6 +929,24 @@ static void gfar_init_filer_table(struct gfar_private *priv)
}
}
+static void gfar_detect_errata(struct gfar_private *priv)
+{
+ struct device *dev = &priv->ofdev->dev;
+ unsigned int pvr = mfspr(SPRN_PVR);
+ unsigned int svr = mfspr(SPRN_SVR);
+ unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */
+ unsigned int rev = svr & 0xffff;
+
+ /* MPC8313 Rev 2.0 and higher; All MPC837x */
+ if ((pvr == 0x80850010 && mod == 0x80b0 && rev >= 0x0020) ||
+ (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
+ priv->errata |= GFAR_ERRATA_74;
+
+ if (priv->errata)
+ dev_info(dev, "enabled errata workarounds, flags: 0x%x\n",
+ priv->errata);
+}
+
/* Set up the ethernet device structure, private data,
* and anything else we need before we start */
static int gfar_probe(struct of_device *ofdev,
@@ -960,6 +979,8 @@ static int gfar_probe(struct of_device *ofdev,
dev_set_drvdata(&ofdev->dev, priv);
regs = priv->gfargrp[0].regs;
+ gfar_detect_errata(priv);
+
/* Stop the DMA engine now, in case it was running before */
/* (The firmware could have used it, and left it running). */
gfar_halt(dev);
@@ -974,7 +995,10 @@ static int gfar_probe(struct of_device *ofdev,
gfar_write(&regs->maccfg1, tempval);
/* Initialize MACCFG2. */
- gfar_write(&regs->maccfg2, MACCFG2_INIT_SETTINGS);
+ tempval = MACCFG2_INIT_SETTINGS;
+ if (gfar_has_errata(priv, GFAR_ERRATA_74))
+ tempval |= MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK;
+ gfar_write(&regs->maccfg2, tempval);
/* Initialize ECNTRL */
gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
@@ -2300,7 +2324,8 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
* to allow huge frames, and to check the length */
tempval = gfar_read(&regs->maccfg2);
- if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE)
+ if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE ||
+ gfar_has_errata(priv, GFAR_ERRATA_74))
tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
else
tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);