diff options
Diffstat (limited to 'drivers/net/gianfar_mii.c')
-rw-r--r-- | drivers/net/gianfar_mii.c | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c new file mode 100644 index 000000000000..04a462c2a5b7 --- /dev/null +++ b/drivers/net/gianfar_mii.c @@ -0,0 +1,219 @@ +/* + * drivers/net/gianfar_mii.c + * + * Gianfar Ethernet Driver -- MIIM bus implementation + * Provides Bus interface for MIIM regs + * + * Author: Andy Fleming + * Maintainer: Kumar Gala + * + * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <asm/ocp.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> + +#include "gianfar.h" +#include "gianfar_mii.h" + +/* Write value to the PHY at mii_id at register regnum, + * on the bus, waiting until the write is done before returning. + * All PHY configuration is done through the TSEC1 MIIM regs */ +int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) +{ + struct gfar_mii *regs = bus->priv; + + /* Set the PHY address and the register address we want to write */ + gfar_write(®s->miimadd, (mii_id << 8) | regnum); + + /* Write out the value we want */ + gfar_write(®s->miimcon, value); + + /* Wait for the transaction to finish */ + while (gfar_read(®s->miimind) & MIIMIND_BUSY) + cpu_relax(); + + return 0; +} + +/* Read the bus for PHY at addr mii_id, register regnum, and + * return the value. Clears miimcom first. All PHY + * configuration has to be done through the TSEC1 MIIM regs */ +int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum) +{ + struct gfar_mii *regs = bus->priv; + u16 value; + + /* Set the PHY address and the register address we want to read */ + gfar_write(®s->miimadd, (mii_id << 8) | regnum); + + /* Clear miimcom, and then initiate a read */ + gfar_write(®s->miimcom, 0); + gfar_write(®s->miimcom, MII_READ_COMMAND); + + /* Wait for the transaction to finish */ + while (gfar_read(®s->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) + cpu_relax(); + + /* Grab the value of the register from miimstat */ + value = gfar_read(®s->miimstat); + + return value; +} + + +/* Reset the MIIM registers, and wait for the bus to free */ +int gfar_mdio_reset(struct mii_bus *bus) +{ + struct gfar_mii *regs = bus->priv; + unsigned int timeout = PHY_INIT_TIMEOUT; + + spin_lock_bh(&bus->mdio_lock); + + /* Reset the management interface */ + gfar_write(®s->miimcfg, MIIMCFG_RESET); + + /* Setup the MII Mgmt clock speed */ + gfar_write(®s->miimcfg, MIIMCFG_INIT_VALUE); + + /* Wait until the bus is free */ + while ((gfar_read(®s->miimind) & MIIMIND_BUSY) && + timeout--) + cpu_relax(); + + spin_unlock_bh(&bus->mdio_lock); + + if(timeout <= 0) { + printk(KERN_ERR "%s: The MII Bus is stuck!\n", + bus->name); + return -EBUSY; + } + + return 0; +} + + +int gfar_mdio_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gianfar_mdio_data *pdata; + struct gfar_mii *regs; + struct mii_bus *new_bus; + int err = 0; + + if (NULL == dev) + return -EINVAL; + + new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); + + if (NULL == new_bus) + return -ENOMEM; + + new_bus->name = "Gianfar MII Bus", + new_bus->read = &gfar_mdio_read, + new_bus->write = &gfar_mdio_write, + new_bus->reset = &gfar_mdio_reset, + new_bus->id = pdev->id; + + pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data; + + if (NULL == pdata) { + printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id); + return -ENODEV; + } + + /* Set the PHY base address */ + regs = (struct gfar_mii *) ioremap(pdata->paddr, + sizeof (struct gfar_mii)); + + if (NULL == regs) { + err = -ENOMEM; + goto reg_map_fail; + } + + new_bus->priv = regs; + + new_bus->irq = pdata->irq; + + new_bus->dev = dev; + dev_set_drvdata(dev, new_bus); + + err = mdiobus_register(new_bus); + + if (0 != err) { + printk (KERN_ERR "%s: Cannot register as MDIO bus\n", + new_bus->name); + goto bus_register_fail; + } + + return 0; + +bus_register_fail: + iounmap((void *) regs); +reg_map_fail: + kfree(new_bus); + + return err; +} + + +int gfar_mdio_remove(struct device *dev) +{ + struct mii_bus *bus = dev_get_drvdata(dev); + + mdiobus_unregister(bus); + + dev_set_drvdata(dev, NULL); + + iounmap((void *) (&bus->priv)); + bus->priv = NULL; + kfree(bus); + + return 0; +} + +static struct device_driver gianfar_mdio_driver = { + .name = "fsl-gianfar_mdio", + .bus = &platform_bus_type, + .probe = gfar_mdio_probe, + .remove = gfar_mdio_remove, +}; + +int __init gfar_mdio_init(void) +{ + return driver_register(&gianfar_mdio_driver); +} + +void __exit gfar_mdio_exit(void) +{ + driver_unregister(&gianfar_mdio_driver); +} |