summaryrefslogtreecommitdiffstats
path: root/drivers/net/ieee802154/cc2520.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ieee802154/cc2520.c')
-rw-r--r--drivers/net/ieee802154/cc2520.c150
1 files changed, 93 insertions, 57 deletions
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
index 181b349b060e..f833b8bb6663 100644
--- a/drivers/net/ieee802154/cc2520.c
+++ b/drivers/net/ieee802154/cc2520.c
@@ -714,11 +714,45 @@ static irqreturn_t cc2520_sfd_isr(int irq, void *data)
return IRQ_HANDLED;
}
+static int cc2520_get_platform_data(struct spi_device *spi,
+ struct cc2520_platform_data *pdata)
+{
+ struct device_node *np = spi->dev.of_node;
+ struct cc2520_private *priv = spi_get_drvdata(spi);
+
+ if (!np) {
+ struct cc2520_platform_data *spi_pdata = spi->dev.platform_data;
+ if (!spi_pdata)
+ return -ENOENT;
+ *pdata = *spi_pdata;
+ return 0;
+ }
+
+ pdata->fifo = of_get_named_gpio(np, "fifo-gpio", 0);
+ priv->fifo_pin = pdata->fifo;
+
+ pdata->fifop = of_get_named_gpio(np, "fifop-gpio", 0);
+
+ pdata->sfd = of_get_named_gpio(np, "sfd-gpio", 0);
+ pdata->cca = of_get_named_gpio(np, "cca-gpio", 0);
+ pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
+ pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
+
+ pdata->amplified = of_property_read_bool(np, "amplified");
+
+ return 0;
+}
+
static int cc2520_hw_init(struct cc2520_private *priv)
{
u8 status = 0, state = 0xff;
int ret;
int timeout = 100;
+ struct cc2520_platform_data pdata;
+
+ ret = cc2520_get_platform_data(priv->spi, &pdata);
+ if (ret)
+ goto err_ret;
ret = cc2520_read_register(priv, CC2520_FSMSTAT1, &state);
if (ret)
@@ -741,11 +775,47 @@ static int cc2520_hw_init(struct cc2520_private *priv)
dev_vdbg(&priv->spi->dev, "oscillator brought up\n");
- /* Registers default value: section 28.1 in Datasheet */
- ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7);
- if (ret)
- goto err_ret;
+ /* If the CC2520 is connected to a CC2591 amplifier, we must both
+ * configure GPIOs on the CC2520 to correctly configure the CC2591
+ * and change a couple settings of the CC2520 to work with the
+ * amplifier. See section 8 page 17 of TI application note AN065.
+ * http://www.ti.com/lit/an/swra229a/swra229a.pdf
+ */
+ if (pdata.amplified) {
+ ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF9);
+ if (ret)
+ goto err_ret;
+
+ ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x16);
+ if (ret)
+ goto err_ret;
+
+ ret = cc2520_write_register(priv, CC2520_GPIOCTRL0, 0x46);
+ if (ret)
+ goto err_ret;
+
+ ret = cc2520_write_register(priv, CC2520_GPIOCTRL5, 0x47);
+ if (ret)
+ goto err_ret;
+
+ ret = cc2520_write_register(priv, CC2520_GPIOPOLARITY, 0x1e);
+ if (ret)
+ goto err_ret;
+
+ ret = cc2520_write_register(priv, CC2520_TXCTRL, 0xc1);
+ if (ret)
+ goto err_ret;
+ } else {
+ ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7);
+ if (ret)
+ goto err_ret;
+ ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11);
+ if (ret)
+ goto err_ret;
+ }
+
+ /* Registers default value: section 28.1 in Datasheet */
ret = cc2520_write_register(priv, CC2520_CCACTRL0, 0x1A);
if (ret)
goto err_ret;
@@ -770,10 +840,6 @@ static int cc2520_hw_init(struct cc2520_private *priv)
if (ret)
goto err_ret;
- ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11);
- if (ret)
- goto err_ret;
-
ret = cc2520_write_register(priv, CC2520_ADCTEST0, 0x10);
if (ret)
goto err_ret;
@@ -808,40 +874,10 @@ err_ret:
return ret;
}
-static struct cc2520_platform_data *
-cc2520_get_platform_data(struct spi_device *spi)
-{
- struct cc2520_platform_data *pdata;
- struct device_node *np = spi->dev.of_node;
- struct cc2520_private *priv = spi_get_drvdata(spi);
-
- if (!np)
- return spi->dev.platform_data;
-
- pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- goto done;
-
- pdata->fifo = of_get_named_gpio(np, "fifo-gpio", 0);
- priv->fifo_pin = pdata->fifo;
-
- pdata->fifop = of_get_named_gpio(np, "fifop-gpio", 0);
-
- pdata->sfd = of_get_named_gpio(np, "sfd-gpio", 0);
- pdata->cca = of_get_named_gpio(np, "cca-gpio", 0);
- pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
- pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
-
- spi->dev.platform_data = pdata;
-
-done:
- return pdata;
-}
-
static int cc2520_probe(struct spi_device *spi)
{
struct cc2520_private *priv;
- struct cc2520_platform_data *pdata;
+ struct cc2520_platform_data pdata;
int ret;
priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
@@ -850,8 +886,8 @@ static int cc2520_probe(struct spi_device *spi)
spi_set_drvdata(spi, priv);
- pdata = cc2520_get_platform_data(spi);
- if (!pdata) {
+ ret = cc2520_get_platform_data(spi, &pdata);
+ if (ret < 0) {
dev_err(&spi->dev, "no platform data\n");
return -EINVAL;
}
@@ -869,76 +905,76 @@ static int cc2520_probe(struct spi_device *spi)
init_completion(&priv->tx_complete);
/* Request all the gpio's */
- if (!gpio_is_valid(pdata->fifo)) {
+ if (!gpio_is_valid(pdata.fifo)) {
dev_err(&spi->dev, "fifo gpio is not valid\n");
ret = -EINVAL;
goto err_hw_init;
}
- ret = devm_gpio_request_one(&spi->dev, pdata->fifo,
+ ret = devm_gpio_request_one(&spi->dev, pdata.fifo,
GPIOF_IN, "fifo");
if (ret)
goto err_hw_init;
- if (!gpio_is_valid(pdata->cca)) {
+ if (!gpio_is_valid(pdata.cca)) {
dev_err(&spi->dev, "cca gpio is not valid\n");
ret = -EINVAL;
goto err_hw_init;
}
- ret = devm_gpio_request_one(&spi->dev, pdata->cca,
+ ret = devm_gpio_request_one(&spi->dev, pdata.cca,
GPIOF_IN, "cca");
if (ret)
goto err_hw_init;
- if (!gpio_is_valid(pdata->fifop)) {
+ if (!gpio_is_valid(pdata.fifop)) {
dev_err(&spi->dev, "fifop gpio is not valid\n");
ret = -EINVAL;
goto err_hw_init;
}
- ret = devm_gpio_request_one(&spi->dev, pdata->fifop,
+ ret = devm_gpio_request_one(&spi->dev, pdata.fifop,
GPIOF_IN, "fifop");
if (ret)
goto err_hw_init;
- if (!gpio_is_valid(pdata->sfd)) {
+ if (!gpio_is_valid(pdata.sfd)) {
dev_err(&spi->dev, "sfd gpio is not valid\n");
ret = -EINVAL;
goto err_hw_init;
}
- ret = devm_gpio_request_one(&spi->dev, pdata->sfd,
+ ret = devm_gpio_request_one(&spi->dev, pdata.sfd,
GPIOF_IN, "sfd");
if (ret)
goto err_hw_init;
- if (!gpio_is_valid(pdata->reset)) {
+ if (!gpio_is_valid(pdata.reset)) {
dev_err(&spi->dev, "reset gpio is not valid\n");
ret = -EINVAL;
goto err_hw_init;
}
- ret = devm_gpio_request_one(&spi->dev, pdata->reset,
+ ret = devm_gpio_request_one(&spi->dev, pdata.reset,
GPIOF_OUT_INIT_LOW, "reset");
if (ret)
goto err_hw_init;
- if (!gpio_is_valid(pdata->vreg)) {
+ if (!gpio_is_valid(pdata.vreg)) {
dev_err(&spi->dev, "vreg gpio is not valid\n");
ret = -EINVAL;
goto err_hw_init;
}
- ret = devm_gpio_request_one(&spi->dev, pdata->vreg,
+ ret = devm_gpio_request_one(&spi->dev, pdata.vreg,
GPIOF_OUT_INIT_LOW, "vreg");
if (ret)
goto err_hw_init;
- gpio_set_value(pdata->vreg, HIGH);
+ gpio_set_value(pdata.vreg, HIGH);
usleep_range(100, 150);
- gpio_set_value(pdata->reset, HIGH);
+ gpio_set_value(pdata.reset, HIGH);
usleep_range(200, 250);
ret = cc2520_hw_init(priv);
@@ -947,7 +983,7 @@ static int cc2520_probe(struct spi_device *spi)
/* Set up fifop interrupt */
ret = devm_request_irq(&spi->dev,
- gpio_to_irq(pdata->fifop),
+ gpio_to_irq(pdata.fifop),
cc2520_fifop_isr,
IRQF_TRIGGER_RISING,
dev_name(&spi->dev),
@@ -959,7 +995,7 @@ static int cc2520_probe(struct spi_device *spi)
/* Set up sfd interrupt */
ret = devm_request_irq(&spi->dev,
- gpio_to_irq(pdata->sfd),
+ gpio_to_irq(pdata.sfd),
cc2520_sfd_isr,
IRQF_TRIGGER_FALLING,
dev_name(&spi->dev),
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 08:21:44 +0100