diff options
Diffstat (limited to 'drivers/net/irda/girbil-sir.c')
| -rw-r--r-- | drivers/net/irda/girbil-sir.c | 258 |
1 files changed, 258 insertions, 0 deletions
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c new file mode 100644 index 000000000000..0d2fe87fb9b7 --- /dev/null +++ b/drivers/net/irda/girbil-sir.c @@ -0,0 +1,258 @@ +/********************************************************************* + * + * Filename: girbil.c + * Version: 1.2 + * Description: Implementation for the Greenwich GIrBIL dongle + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sat Feb 6 21:02:33 1999 + * Modified at: Fri Dec 17 09:13:20 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1999 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsų admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <net/irda/irda.h> + +#include "sir-dev.h" + +static int girbil_reset(struct sir_dev *dev); +static int girbil_open(struct sir_dev *dev); +static int girbil_close(struct sir_dev *dev); +static int girbil_change_speed(struct sir_dev *dev, unsigned speed); + +/* Control register 1 */ +#define GIRBIL_TXEN 0x01 /* Enable transmitter */ +#define GIRBIL_RXEN 0x02 /* Enable receiver */ +#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */ +#define GIRBIL_ECHO 0x08 /* Echo control characters */ + +/* LED Current Register (0x2) */ +#define GIRBIL_HIGH 0x20 +#define GIRBIL_MEDIUM 0x21 +#define GIRBIL_LOW 0x22 + +/* Baud register (0x3) */ +#define GIRBIL_2400 0x30 +#define GIRBIL_4800 0x31 +#define GIRBIL_9600 0x32 +#define GIRBIL_19200 0x33 +#define GIRBIL_38400 0x34 +#define GIRBIL_57600 0x35 +#define GIRBIL_115200 0x36 + +/* Mode register (0x4) */ +#define GIRBIL_IRDA 0x40 +#define GIRBIL_ASK 0x41 + +/* Control register 2 (0x5) */ +#define GIRBIL_LOAD 0x51 /* Load the new baud rate value */ + +static struct dongle_driver girbil = { + .owner = THIS_MODULE, + .driver_name = "Greenwich GIrBIL", + .type = IRDA_GIRBIL_DONGLE, + .open = girbil_open, + .close = girbil_close, + .reset = girbil_reset, + .set_speed = girbil_change_speed, +}; + +static int __init girbil_sir_init(void) +{ + return irda_register_dongle(&girbil); +} + +static void __exit girbil_sir_cleanup(void) +{ + irda_unregister_dongle(&girbil); +} + +static int girbil_open(struct sir_dev *dev) +{ + struct qos_info *qos = &dev->qos; + + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + + /* Power on dongle */ + sirdev_set_dtr_rts(dev, TRUE, TRUE); + + qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200; + qos->min_turn_time.bits = 0x03; + irda_qos_bits_to_value(qos); + + /* irda thread waits 50 msec for power settling */ + + return 0; +} + +static int girbil_close(struct sir_dev *dev) +{ + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + + /* Power off dongle */ + sirdev_set_dtr_rts(dev, FALSE, FALSE); + + return 0; +} + +/* + * Function girbil_change_speed (dev, speed) + * + * Set the speed for the Girbil type dongle. + * + */ + +#define GIRBIL_STATE_WAIT_SPEED (SIRDEV_STATE_DONGLE_SPEED + 1) + +static int girbil_change_speed(struct sir_dev *dev, unsigned speed) +{ + unsigned state = dev->fsm.substate; + unsigned delay = 0; + u8 control[2]; + static int ret = 0; + + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + + /* dongle alread reset - port and dongle at default speed */ + + switch(state) { + + case SIRDEV_STATE_DONGLE_SPEED: + + /* Set DTR and Clear RTS to enter command mode */ + sirdev_set_dtr_rts(dev, FALSE, TRUE); + + udelay(25); /* better wait a little while */ + + ret = 0; + switch (speed) { + default: + ret = -EINVAL; + /* fall through */ + case 9600: + control[0] = GIRBIL_9600; + break; + case 19200: + control[0] = GIRBIL_19200; + break; + case 34800: + control[0] = GIRBIL_38400; + break; + case 57600: + control[0] = GIRBIL_57600; + break; + case 115200: + control[0] = GIRBIL_115200; + break; + } + control[1] = GIRBIL_LOAD; + + /* Write control bytes */ + sirdev_raw_write(dev, control, 2); + + dev->speed = speed; + + state = GIRBIL_STATE_WAIT_SPEED; + delay = 100; + break; + + case GIRBIL_STATE_WAIT_SPEED: + /* Go back to normal mode */ + sirdev_set_dtr_rts(dev, TRUE, TRUE); + + udelay(25); /* better wait a little while */ + break; + + default: + IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state); + ret = -EINVAL; + break; + } + dev->fsm.substate = state; + return (delay > 0) ? delay : ret; +} + +/* + * Function girbil_reset (driver) + * + * This function resets the girbil dongle. + * + * Algorithm: + * 0. set RTS, and wait at least 5 ms + * 1. clear RTS + */ + + +#define GIRBIL_STATE_WAIT1_RESET (SIRDEV_STATE_DONGLE_RESET + 1) +#define GIRBIL_STATE_WAIT2_RESET (SIRDEV_STATE_DONGLE_RESET + 2) +#define GIRBIL_STATE_WAIT3_RESET (SIRDEV_STATE_DONGLE_RESET + 3) + +static int girbil_reset(struct sir_dev *dev) +{ + unsigned state = dev->fsm.substate; + unsigned delay = 0; + u8 control = GIRBIL_TXEN | GIRBIL_RXEN; + int ret = 0; + + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + + switch (state) { + case SIRDEV_STATE_DONGLE_RESET: + /* Reset dongle */ + sirdev_set_dtr_rts(dev, TRUE, FALSE); + /* Sleep at least 5 ms */ + delay = 20; + state = GIRBIL_STATE_WAIT1_RESET; + break; + + case GIRBIL_STATE_WAIT1_RESET: + /* Set DTR and clear RTS to enter command mode */ + sirdev_set_dtr_rts(dev, FALSE, TRUE); + delay = 20; + state = GIRBIL_STATE_WAIT2_RESET; + break; + + case GIRBIL_STATE_WAIT2_RESET: + /* Write control byte */ + sirdev_raw_write(dev, &control, 1); + delay = 20; + state = GIRBIL_STATE_WAIT3_RESET; + break; + + case GIRBIL_STATE_WAIT3_RESET: + /* Go back to normal mode */ + sirdev_set_dtr_rts(dev, TRUE, TRUE); + dev->speed = 9600; + break; + + default: + IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state); + ret = -1; + break; + } + dev->fsm.substate = state; + return (delay > 0) ? delay : ret; +} + +MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>"); +MODULE_DESCRIPTION("Greenwich GIrBIL dongle driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("irda-dongle-4"); /* IRDA_GIRBIL_DONGLE */ + +module_init(girbil_sir_init); +module_exit(girbil_sir_cleanup); |