summaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe/ixgbe_82599.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_82599.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_82599.c887
1 files changed, 343 insertions, 544 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 0bd8fbb5bfd0..8d316d9cd29d 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -56,9 +56,6 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
bool autoneg_wait_to_complete);
-static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg);
static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
@@ -68,9 +65,9 @@ static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
- if (hw->phy.multispeed_fiber) {
- /* Set up dual speed SFP+ support */
- mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+
+ /* enable the laser control functions for SFP+ fiber */
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) {
mac->ops.disable_tx_laser =
&ixgbe_disable_tx_laser_multispeed_fiber;
mac->ops.enable_tx_laser =
@@ -80,6 +77,12 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
mac->ops.disable_tx_laser = NULL;
mac->ops.enable_tx_laser = NULL;
mac->ops.flap_tx_laser = NULL;
+ }
+
+ if (hw->phy.multispeed_fiber) {
+ /* Set up dual speed SFP+ support */
+ mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+ } else {
if ((mac->ops.get_media_type(hw) ==
ixgbe_media_type_backplane) &&
(hw->phy.smart_speed == ixgbe_smart_speed_auto ||
@@ -93,6 +96,8 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
{
s32 ret_val = 0;
+ u32 reg_anlp1 = 0;
+ u32 i = 0;
u16 list_offset, data_offset, data_value;
if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
@@ -119,14 +124,34 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
IXGBE_WRITE_FLUSH(hw);
hw->eeprom.ops.read(hw, ++data_offset, &data_value);
}
- /* Now restart DSP by setting Restart_AN */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
- (IXGBE_READ_REG(hw, IXGBE_AUTOC) | IXGBE_AUTOC_AN_RESTART));
/* Release the semaphore */
ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
/* Delay obtaining semaphore again to allow FW access */
msleep(hw->eeprom.semaphore_delay);
+
+ /* Now restart DSP by setting Restart_AN and clearing LMS */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
+ IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) |
+ IXGBE_AUTOC_AN_RESTART));
+
+ /* Wait for AN to leave state 0 */
+ for (i = 0; i < 10; i++) {
+ msleep(4);
+ reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+ if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)
+ break;
+ }
+ if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) {
+ hw_dbg(hw, "sfp module setup not complete\n");
+ ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
+ goto setup_sfp_out;
+ }
+
+ /* Restart DSP by setting Restart_AN and return to SFI mode */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw,
+ IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL |
+ IXGBE_AUTOC_AN_RESTART));
}
setup_sfp_out:
@@ -174,7 +199,7 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
mac->ops.get_link_capabilities =
- &ixgbe_get_copper_link_capabilities_82599;
+ &ixgbe_get_copper_link_capabilities_generic;
}
/* Set necessary function pointers based on phy type */
@@ -184,6 +209,10 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
phy->ops.get_firmware_version =
&ixgbe_get_phy_firmware_version_tnx;
break;
+ case ixgbe_phy_aq:
+ phy->ops.get_firmware_version =
+ &ixgbe_get_phy_firmware_version_generic;
+ break;
default:
break;
}
@@ -290,37 +319,6 @@ out:
}
/**
- * ixgbe_get_copper_link_capabilities_82599 - Determines link capabilities
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @autoneg: boolean auto-negotiation value
- *
- * Determines the link capabilities by reading the AUTOC register.
- **/
-static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg)
-{
- s32 status = IXGBE_ERR_LINK_SETUP;
- u16 speed_ability;
-
- *speed = 0;
- *autoneg = true;
-
- status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
- &speed_ability);
-
- if (status == 0) {
- if (speed_ability & MDIO_SPEED_10G)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (speed_ability & MDIO_PMA_SPEED_1000)
- *speed |= IXGBE_LINK_SPEED_1GB_FULL;
- }
-
- return status;
-}
-
-/**
* ixgbe_get_media_type_82599 - Get media type
* @hw: pointer to hardware structure
*
@@ -332,7 +330,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
/* Detect if there is a copper PHY attached. */
if (hw->phy.type == ixgbe_phy_cu_unknown ||
- hw->phy.type == ixgbe_phy_tn) {
+ hw->phy.type == ixgbe_phy_tn ||
+ hw->phy.type == ixgbe_phy_aq) {
media_type = ixgbe_media_type_copper;
goto out;
}
@@ -342,11 +341,13 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_82599_KX4_MEZZ:
case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
case IXGBE_DEV_ID_82599_KR:
+ case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
case IXGBE_DEV_ID_82599_XAUI_LOM:
/* Default device ID is mezzanine card KX/KX4 */
media_type = ixgbe_media_type_backplane;
break;
case IXGBE_DEV_ID_82599_SFP:
+ case IXGBE_DEV_ID_82599_SFP_FCOE:
case IXGBE_DEV_ID_82599_SFP_EM:
media_type = ixgbe_media_type_fiber;
break;
@@ -1002,7 +1003,7 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
udelay(10);
}
if (i >= IXGBE_FDIRCMD_CMD_POLL) {
- hw_dbg(hw ,"Flow Director previous command isn't complete, "
+ hw_dbg(hw, "Flow Director previous command isn't complete, "
"aborting table re-initialization.\n");
return IXGBE_ERR_FDIR_REINIT_FAILED;
}
@@ -1112,13 +1113,10 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)
/* Move the flexible bytes to use the ethertype - shift 6 words */
fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
- fdirctrl |= IXGBE_FDIRCTRL_REPORT_STATUS;
/* Prime the keys for hashing */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY,
- htonl(IXGBE_ATR_BUCKET_HASH_KEY));
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,
- htonl(IXGBE_ATR_SIGNATURE_HASH_KEY));
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
/*
* Poll init-done after we write the register. Estimated times:
@@ -1208,10 +1206,8 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
/* Prime the keys for hashing */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY,
- htonl(IXGBE_ATR_BUCKET_HASH_KEY));
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,
- htonl(IXGBE_ATR_SIGNATURE_HASH_KEY));
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
/*
* Poll init-done after we write the register. Estimated times:
@@ -1250,8 +1246,8 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
* @stream: input bitstream to compute the hash on
* @key: 32-bit hash key
**/
-static u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input,
- u32 key)
+static u32 ixgbe_atr_compute_hash_82599(union ixgbe_atr_input *atr_input,
+ u32 key)
{
/*
* The algorithm is as follows:
@@ -1271,410 +1267,250 @@ static u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input,
* To simplify for programming, the algorithm is implemented
* in software this way:
*
- * Key[31:0], Stream[335:0]
+ * key[31:0], hi_hash_dword[31:0], lo_hash_dword[31:0], hash[15:0]
*
- * tmp_key[11 * 32 - 1:0] = 11{Key[31:0] = key concatenated 11 times
- * int_key[350:0] = tmp_key[351:1]
- * int_stream[365:0] = Stream[14:0] | Stream[335:0] | Stream[335:321]
+ * for (i = 0; i < 352; i+=32)
+ * hi_hash_dword[31:0] ^= Stream[(i+31):i];
*
- * hash[15:0] = 0;
- * for (i = 0; i < 351; i++) {
- * if (int_key[i])
- * hash ^= int_stream[(i + 15):i];
+ * lo_hash_dword[15:0] ^= Stream[15:0];
+ * lo_hash_dword[15:0] ^= hi_hash_dword[31:16];
+ * lo_hash_dword[31:16] ^= hi_hash_dword[15:0];
+ *
+ * hi_hash_dword[31:0] ^= Stream[351:320];
+ *
+ * if(key[0])
+ * hash[15:0] ^= Stream[15:0];
+ *
+ * for (i = 0; i < 16; i++) {
+ * if (key[i])
+ * hash[15:0] ^= lo_hash_dword[(i+15):i];
+ * if (key[i + 16])
+ * hash[15:0] ^= hi_hash_dword[(i+15):i];
* }
+ *
*/
+ __be32 common_hash_dword = 0;
+ u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+ u32 hash_result = 0;
+ u8 i;
- union {
- u64 fill[6];
- u32 key[11];
- u8 key_stream[44];
- } tmp_key;
+ /* record the flow_vm_vlan bits as they are a key part to the hash */
+ flow_vm_vlan = ntohl(atr_input->dword_stream[0]);
- u8 *stream = (u8 *)atr_input;
- u8 int_key[44]; /* upper-most bit unused */
- u8 hash_str[46]; /* upper-most 2 bits unused */
- u16 hash_result = 0;
- int i, j, k, h;
+ /* generate common hash dword */
+ for (i = 10; i; i -= 2)
+ common_hash_dword ^= atr_input->dword_stream[i] ^
+ atr_input->dword_stream[i - 1];
- /*
- * Initialize the fill member to prevent warnings
- * on some compilers
- */
- tmp_key.fill[0] = 0;
+ hi_hash_dword = ntohl(common_hash_dword);
- /* First load the temporary key stream */
- for (i = 0; i < 6; i++) {
- u64 fillkey = ((u64)key << 32) | key;
- tmp_key.fill[i] = fillkey;
- }
+ /* low dword is word swapped version of common */
+ lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
- /*
- * Set the interim key for the hashing. Bit 352 is unused, so we must
- * shift and compensate when building the key.
- */
+ /* apply flow ID/VM pool/VLAN ID bits to hash words */
+ hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
- int_key[0] = tmp_key.key_stream[0] >> 1;
- for (i = 1, j = 0; i < 44; i++) {
- unsigned int this_key = tmp_key.key_stream[j] << 7;
- j++;
- int_key[i] = (u8)(this_key | (tmp_key.key_stream[j] >> 1));
- }
+ /* Process bits 0 and 16 */
+ if (key & 0x0001) hash_result ^= lo_hash_dword;
+ if (key & 0x00010000) hash_result ^= hi_hash_dword;
/*
- * Set the interim bit string for the hashing. Bits 368 and 367 are
- * unused, so shift and compensate when building the string.
+ * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+ * delay this because bit 0 of the stream should not be processed
+ * so we do not add the vlan until after bit 0 was processed
*/
- hash_str[0] = (stream[40] & 0x7f) >> 1;
- for (i = 1, j = 40; i < 46; i++) {
- unsigned int this_str = stream[j] << 7;
- j++;
- if (j > 41)
- j = 0;
- hash_str[i] = (u8)(this_str | (stream[j] >> 1));
- }
-
- /*
- * Now compute the hash. i is the index into hash_str, j is into our
- * key stream, k is counting the number of bits, and h interates within
- * each byte.
- */
- for (i = 45, j = 43, k = 0; k < 351 && i >= 2 && j >= 0; i--, j--) {
- for (h = 0; h < 8 && k < 351; h++, k++) {
- if (int_key[j] & (1 << h)) {
- /*
- * Key bit is set, XOR in the current 16-bit
- * string. Example of processing:
- * h = 0,
- * tmp = (hash_str[i - 2] & 0 << 16) |
- * (hash_str[i - 1] & 0xff << 8) |
- * (hash_str[i] & 0xff >> 0)
- * So tmp = hash_str[15 + k:k], since the
- * i + 2 clause rolls off the 16-bit value
- * h = 7,
- * tmp = (hash_str[i - 2] & 0x7f << 9) |
- * (hash_str[i - 1] & 0xff << 1) |
- * (hash_str[i] & 0x80 >> 7)
- */
- int tmp = (hash_str[i] >> h);
- tmp |= (hash_str[i - 1] << (8 - h));
- tmp |= (int)(hash_str[i - 2] & ((1 << h) - 1))
- << (16 - h);
- hash_result ^= (u16)tmp;
- }
- }
- }
-
- return hash_result;
-}
-
-/**
- * ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
- * @input: input stream to modify
- * @vlan: the VLAN id to load
- **/
-s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan)
-{
- input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] = vlan >> 8;
- input->byte_stream[IXGBE_ATR_VLAN_OFFSET] = vlan & 0xff;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address
- * @input: input stream to modify
- * @src_addr: the IP address to load
- **/
-s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr)
-{
- input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] = src_addr >> 24;
- input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] =
- (src_addr >> 16) & 0xff;
- input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] =
- (src_addr >> 8) & 0xff;
- input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET] = src_addr & 0xff;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address
- * @input: input stream to modify
- * @dst_addr: the IP address to load
- **/
-s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 dst_addr)
-{
- input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] = dst_addr >> 24;
- input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] =
- (dst_addr >> 16) & 0xff;
- input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] =
- (dst_addr >> 8) & 0xff;
- input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET] = dst_addr & 0xff;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_src_port_82599 - Sets the source port
- * @input: input stream to modify
- * @src_port: the source port to load
- **/
-s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port)
-{
- input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1] = src_port >> 8;
- input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] = src_port & 0xff;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_dst_port_82599 - Sets the destination port
- * @input: input stream to modify
- * @dst_port: the destination port to load
- **/
-s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, u16 dst_port)
-{
- input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1] = dst_port >> 8;
- input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] = dst_port & 0xff;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_flex_byte_82599 - Sets the flexible bytes
- * @input: input stream to modify
- * @flex_bytes: the flexible bytes to load
- **/
-s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input, u16 flex_byte)
-{
- input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] = flex_byte >> 8;
- input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET] = flex_byte & 0xff;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_l4type_82599 - Sets the layer 4 packet type
- * @input: input stream to modify
- * @l4type: the layer 4 type value to load
- **/
-s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input, u8 l4type)
-{
- input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET] = l4type;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_get_vlan_id_82599 - Gets the VLAN id from the ATR input stream
- * @input: input stream to search
- * @vlan: the VLAN id to load
- **/
-static s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, u16 *vlan)
-{
- *vlan = input->byte_stream[IXGBE_ATR_VLAN_OFFSET];
- *vlan |= input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] << 8;
+ lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
- return 0;
-}
-/**
- * ixgbe_atr_get_src_ipv4_82599 - Gets the source IPv4 address
- * @input: input stream to search
- * @src_addr: the IP address to load
- **/
-static s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input,
- u32 *src_addr)
-{
- *src_addr = input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET];
- *src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] << 8;
- *src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] << 16;
- *src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] << 24;
+ /* process the remaining 30 bits in the key 2 bits at a time */
+ for (i = 15; i; i-- ) {
+ if (key & (0x0001 << i)) hash_result ^= lo_hash_dword >> i;
+ if (key & (0x00010000 << i)) hash_result ^= hi_hash_dword >> i;
+ }
- return 0;
+ return hash_result & IXGBE_ATR_HASH_MASK;
}
-/**
- * ixgbe_atr_get_dst_ipv4_82599 - Gets the destination IPv4 address
- * @input: input stream to search
- * @dst_addr: the IP address to load
- **/
-static s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input,
- u32 *dst_addr)
-{
- *dst_addr = input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET];
- *dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] << 8;
- *dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] << 16;
- *dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] << 24;
-
- return 0;
-}
+/*
+ * These defines allow us to quickly generate all of the necessary instructions
+ * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
+ * for values 0 through 15
+ */
+#define IXGBE_ATR_COMMON_HASH_KEY \
+ (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
+#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
+do { \
+ u32 n = (_n); \
+ if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
+ common_hash ^= lo_hash_dword >> n; \
+ else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+ bucket_hash ^= lo_hash_dword >> n; \
+ else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
+ sig_hash ^= lo_hash_dword << (16 - n); \
+ if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
+ common_hash ^= hi_hash_dword >> n; \
+ else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+ bucket_hash ^= hi_hash_dword >> n; \
+ else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
+ sig_hash ^= hi_hash_dword << (16 - n); \
+} while (0);
/**
- * ixgbe_atr_get_src_ipv6_82599 - Gets the source IPv6 address
- * @input: input stream to search
- * @src_addr_1: the first 4 bytes of the IP address to load
- * @src_addr_2: the second 4 bytes of the IP address to load
- * @src_addr_3: the third 4 bytes of the IP address to load
- * @src_addr_4: the fourth 4 bytes of the IP address to load
- **/
-static s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
- u32 *src_addr_1, u32 *src_addr_2,
- u32 *src_addr_3, u32 *src_addr_4)
-{
- *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12];
- *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] << 8;
- *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] << 16;
- *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] << 24;
-
- *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8];
- *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] << 8;
- *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] << 16;
- *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] << 24;
-
- *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4];
- *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] << 8;
- *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] << 16;
- *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] << 24;
-
- *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET];
- *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] << 8;
- *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] << 16;
- *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] << 24;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_get_src_port_82599 - Gets the source port
- * @input: input stream to modify
- * @src_port: the source port to load
+ * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
+ * @stream: input bitstream to compute the hash on
*
- * Even though the input is given in big-endian, the FDIRPORT registers
- * expect the ports to be programmed in little-endian. Hence the need to swap
- * endianness when retrieving the data. This can be confusing since the
- * internal hash engine expects it to be big-endian.
+ * This function is almost identical to the function above but contains
+ * several optomizations such as unwinding all of the loops, letting the
+ * compiler work out all of the conditional ifs since the keys are static
+ * defines, and computing two keys at once since the hashed dword stream
+ * will be the same for both keys.
**/
-static s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input,
- u16 *src_port)
+static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+ union ixgbe_atr_hash_dword common)
{
- *src_port = input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] << 8;
- *src_port |= input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1];
+ u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+ u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
- return 0;
-}
+ /* record the flow_vm_vlan bits as they are a key part to the hash */
+ flow_vm_vlan = ntohl(input.dword);
-/**
- * ixgbe_atr_get_dst_port_82599 - Gets the destination port
- * @input: input stream to modify
- * @dst_port: the destination port to load
- *
- * Even though the input is given in big-endian, the FDIRPORT registers
- * expect the ports to be programmed in little-endian. Hence the need to swap
- * endianness when retrieving the data. This can be confusing since the
- * internal hash engine expects it to be big-endian.
- **/
-static s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input,
- u16 *dst_port)
-{
- *dst_port = input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] << 8;
- *dst_port |= input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1];
+ /* generate common hash dword */
+ hi_hash_dword = ntohl(common.dword);
- return 0;
-}
+ /* low dword is word swapped version of common */
+ lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
-/**
- * ixgbe_atr_get_flex_byte_82599 - Gets the flexible bytes
- * @input: input stream to modify
- * @flex_bytes: the flexible bytes to load
- **/
-static s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input,
- u16 *flex_byte)
-{
- *flex_byte = input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET];
- *flex_byte |= input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] << 8;
+ /* apply flow ID/VM pool/VLAN ID bits to hash words */
+ hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
- return 0;
-}
+ /* Process bits 0 and 16 */
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
-/**
- * ixgbe_atr_get_l4type_82599 - Gets the layer 4 packet type
- * @input: input stream to modify
- * @l4type: the layer 4 type value to load
- **/
-static s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input,
- u8 *l4type)
-{
- *l4type = input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET];
+ /*
+ * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+ * delay this because bit 0 of the stream should not be processed
+ * so we do not add the vlan until after bit 0 was processed
+ */
+ lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+ /* Process remaining 30 bit of the key */
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
+
+ /* combine common_hash result with signature and bucket hashes */
+ bucket_hash ^= common_hash;
+ bucket_hash &= IXGBE_ATR_HASH_MASK;
- return 0;
+ sig_hash ^= common_hash << 16;
+ sig_hash &= IXGBE_ATR_HASH_MASK << 16;
+
+ /* return completed signature hash */
+ return sig_hash ^ bucket_hash;
}
/**
* ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
* @hw: pointer to hardware structure
- * @stream: input bitstream
+ * @input: unique input dword
+ * @common: compressed common input dword
* @queue: queue index to direct traffic to
**/
s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
- struct ixgbe_atr_input *input,
+ union ixgbe_atr_hash_dword input,
+ union ixgbe_atr_hash_dword common,
u8 queue)
{
u64 fdirhashcmd;
- u64 fdircmd;
- u32 fdirhash;
- u16 bucket_hash, sig_hash;
- u8 l4type;
-
- bucket_hash = ixgbe_atr_compute_hash_82599(input,
- IXGBE_ATR_BUCKET_HASH_KEY);
-
- /* bucket_hash is only 15 bits */
- bucket_hash &= IXGBE_ATR_HASH_MASK;
-
- sig_hash = ixgbe_atr_compute_hash_82599(input,
- IXGBE_ATR_SIGNATURE_HASH_KEY);
-
- /* Get the l4type in order to program FDIRCMD properly */
- /* lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 */
- ixgbe_atr_get_l4type_82599(input, &l4type);
+ u32 fdircmd;
/*
- * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
- * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH.
+ * Get the flow_type in order to program FDIRCMD properly
+ * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
*/
- fdirhash = sig_hash << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
-
- fdircmd = (IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
- IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN);
-
- switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
- case IXGBE_ATR_L4TYPE_TCP:
- fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
- break;
- case IXGBE_ATR_L4TYPE_UDP:
- fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
- break;
- case IXGBE_ATR_L4TYPE_SCTP:
- fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
+ switch (input.formatted.flow_type) {
+ case IXGBE_ATR_FLOW_TYPE_TCPV4:
+ case IXGBE_ATR_FLOW_TYPE_UDPV4:
+ case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+ case IXGBE_ATR_FLOW_TYPE_TCPV6:
+ case IXGBE_ATR_FLOW_TYPE_UDPV6:
+ case IXGBE_ATR_FLOW_TYPE_SCTPV6:
break;
default:
- hw_dbg(hw, "Error on l4type input\n");
+ hw_dbg(hw, " Error on flow type input\n");
return IXGBE_ERR_CONFIG;
}
- if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK)
- fdircmd |= IXGBE_FDIRCMD_IPV6;
+ /* configure FDIRCMD register */
+ fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+ IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+ fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+ fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
- fdircmd |= ((u64)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT);
- fdirhashcmd = ((fdircmd << 32) | fdirhash);
+ /*
+ * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
+ * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH.
+ */
+ fdirhashcmd = (u64)fdircmd << 32;
+ fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+ hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
+
return 0;
}
/**
+ * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
+ * @input_mask: mask to be bit swapped
+ *
+ * The source and destination port masks for flow director are bit swapped
+ * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to
+ * generate a correctly swapped value we need to bit swap the mask and that
+ * is what is accomplished by this function.
+ **/
+static u32 ixgbe_get_fdirtcpm_82599(struct ixgbe_atr_input_masks *input_masks)
+{
+ u32 mask = ntohs(input_masks->dst_port_mask);
+ mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
+ mask |= ntohs(input_masks->src_port_mask);
+ mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+ mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+ mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+ return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+}
+
+/*
+ * These two macros are meant to address the fact that we have registers
+ * that are either all or in part big-endian. As a result on big-endian
+ * systems we will end up byte swapping the value to little-endian before
+ * it is byte swapped again and written to the hardware in the original
+ * big-endian format.
+ */
+#define IXGBE_STORE_AS_BE32(_value) \
+ (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
+ (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
+
+#define IXGBE_WRITE_REG_BE32(a, reg, value) \
+ IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
+
+#define IXGBE_STORE_AS_BE16(_value) \
+ (((u16)(_value) >> 8) | ((u16)(_value) << 8))
+
+/**
* ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
* @hw: pointer to hardware structure
* @input: input bitstream
@@ -1686,135 +1522,139 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
* hardware writes must be protected from one another.
**/
s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
- struct ixgbe_atr_input *input,
+ union ixgbe_atr_input *input,
struct ixgbe_atr_input_masks *input_masks,
u16 soft_id, u8 queue)
{
- u32 fdircmd = 0;
u32 fdirhash;
- u32 src_ipv4 = 0, dst_ipv4 = 0;
- u32 src_ipv6_1, src_ipv6_2, src_ipv6_3, src_ipv6_4;
- u16 src_port, dst_port, vlan_id, flex_bytes;
- u16 bucket_hash;
- u8 l4type;
- u8 fdirm = 0;
-
- /* Get our input values */
- ixgbe_atr_get_l4type_82599(input, &l4type);
+ u32 fdircmd;
+ u32 fdirport, fdirtcpm;
+ u32 fdirvlan;
+ /* start with VLAN, flex bytes, VM pool, and IPv6 destination masked */
+ u32 fdirm = IXGBE_FDIRM_VLANID | IXGBE_FDIRM_VLANP | IXGBE_FDIRM_FLEX |
+ IXGBE_FDIRM_POOL | IXGBE_FDIRM_DIPv6;
/*
- * Check l4type formatting, and bail out before we touch the hardware
+ * Check flow_type formatting, and bail out before we touch the hardware
* if there's a configuration issue
*/
- switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
- case IXGBE_ATR_L4TYPE_TCP:
- fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
- break;
- case IXGBE_ATR_L4TYPE_UDP:
- fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
- break;
- case IXGBE_ATR_L4TYPE_SCTP:
- fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
+ switch (input->formatted.flow_type) {
+ case IXGBE_ATR_FLOW_TYPE_IPV4:
+ /* use the L4 protocol mask for raw IPv4/IPv6 traffic */
+ fdirm |= IXGBE_FDIRM_L4P;
+ case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+ if (input_masks->dst_port_mask || input_masks->src_port_mask) {
+ hw_dbg(hw, " Error on src/dst port mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ case IXGBE_ATR_FLOW_TYPE_TCPV4:
+ case IXGBE_ATR_FLOW_TYPE_UDPV4:
break;
default:
- hw_dbg(hw, "Error on l4type input\n");
+ hw_dbg(hw, " Error on flow type input\n");
return IXGBE_ERR_CONFIG;
}
- bucket_hash = ixgbe_atr_compute_hash_82599(input,
- IXGBE_ATR_BUCKET_HASH_KEY);
-
- /* bucket_hash is only 15 bits */
- bucket_hash &= IXGBE_ATR_HASH_MASK;
-
- ixgbe_atr_get_vlan_id_82599(input, &vlan_id);
- ixgbe_atr_get_src_port_82599(input, &src_port);
- ixgbe_atr_get_dst_port_82599(input, &dst_port);
- ixgbe_atr_get_flex_byte_82599(input, &flex_bytes);
-
- fdirhash = soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
-
- /* Now figure out if we're IPv4 or IPv6 */
- if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) {
- /* IPv6 */
- ixgbe_atr_get_src_ipv6_82599(input, &src_ipv6_1, &src_ipv6_2,
- &src_ipv6_3, &src_ipv6_4);
-
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(0), src_ipv6_1);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(1), src_ipv6_2);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2), src_ipv6_3);
- /* The last 4 bytes is the same register as IPv4 */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv6_4);
-
- fdircmd |= IXGBE_FDIRCMD_IPV6;
- fdircmd |= IXGBE_FDIRCMD_IPv6DMATCH;
- } else {
- /* IPv4 */
- ixgbe_atr_get_src_ipv4_82599(input, &src_ipv4);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv4);
- }
-
- ixgbe_atr_get_dst_ipv4_82599(input, &dst_ipv4);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRIPDA, dst_ipv4);
-
- IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, (vlan_id |
- (flex_bytes << IXGBE_FDIRVLAN_FLEX_SHIFT)));
- IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, (src_port |
- (dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT)));
-
/*
- * Program the relevant mask registers. L4type cannot be
- * masked out in this implementation.
+ * Program the relevant mask registers. If src/dst_port or src/dst_addr
+ * are zero, then assume a full mask for that field. Also assume that
+ * a VLAN of 0 is unspecified, so mask that out as well. L4type
+ * cannot be masked out in this implementation.
*
* This also assumes IPv4 only. IPv6 masking isn't supported at this
* point in time.
*/
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSIP4M, input_masks->src_ip_mask);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRDIP4M, input_masks->dst_ip_mask);
-
- switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
- case IXGBE_ATR_L4TYPE_TCP:
- IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, input_masks->src_port_mask);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM,
- (IXGBE_READ_REG(hw, IXGBE_FDIRTCPM) |
- (input_masks->dst_port_mask << 16)));
+
+ /* Program FDIRM */
+ switch (ntohs(input_masks->vlan_id_mask) & 0xEFFF) {
+ case 0xEFFF:
+ /* Unmask VLAN ID - bit 0 and fall through to unmask prio */
+ fdirm &= ~IXGBE_FDIRM_VLANID;
+ case 0xE000:
+ /* Unmask VLAN prio - bit 1 */
+ fdirm &= ~IXGBE_FDIRM_VLANP;
break;
- case IXGBE_ATR_L4TYPE_UDP:
- IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, input_masks->src_port_mask);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM,
- (IXGBE_READ_REG(hw, IXGBE_FDIRUDPM) |
- (input_masks->src_port_mask << 16)));
+ case 0x0FFF:
+ /* Unmask VLAN ID - bit 0 */
+ fdirm &= ~IXGBE_FDIRM_VLANID;
break;
- default:
- /* this already would have failed above */
+ case 0x0000:
+ /* do nothing, vlans already masked */
break;
+ default:
+ hw_dbg(hw, " Error on VLAN mask\n");
+ return IXGBE_ERR_CONFIG;
}
- /* Program the last mask register, FDIRM */
- if (input_masks->vlan_id_mask)
- /* Mask both VLAN and VLANP - bits 0 and 1 */
- fdirm |= 0x3;
-
- if (input_masks->data_mask)
- /* Flex bytes need masking, so mask the whole thing - bit 4 */
- fdirm |= 0x10;
+ if (input_masks->flex_mask & 0xFFFF) {
+ if ((input_masks->flex_mask & 0xFFFF) != 0xFFFF) {
+ hw_dbg(hw, " Error on flexible byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ /* Unmask Flex Bytes - bit 4 */
+ fdirm &= ~IXGBE_FDIRM_FLEX;
+ }
/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
- fdirm |= 0x24;
-
IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
- fdircmd |= IXGBE_FDIRCMD_CMD_ADD_FLOW;
- fdircmd |= IXGBE_FDIRCMD_FILTER_UPDATE;
- fdircmd |= IXGBE_FDIRCMD_LAST;
- fdircmd |= IXGBE_FDIRCMD_QUEUE_EN;
- fdircmd |= queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+ /* store the TCP/UDP port masks, bit reversed from port layout */
+ fdirtcpm = ixgbe_get_fdirtcpm_82599(input_masks);
+
+ /* write both the same so that UDP and TCP use the same mask */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+
+ /* store source and destination IP masks (big-enian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
+ ~input_masks->src_ip_mask[0]);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
+ ~input_masks->dst_ip_mask[0]);
+
+ /* Apply masks to input data */
+ input->formatted.vlan_id &= input_masks->vlan_id_mask;
+ input->formatted.flex_bytes &= input_masks->flex_mask;
+ input->formatted.src_port &= input_masks->src_port_mask;
+ input->formatted.dst_port &= input_masks->dst_port_mask;
+ input->formatted.src_ip[0] &= input_masks->src_ip_mask[0];
+ input->formatted.dst_ip[0] &= input_masks->dst_ip_mask[0];
+
+ /* record vlan (little-endian) and flex_bytes(big-endian) */
+ fdirvlan =
+ IXGBE_STORE_AS_BE16(ntohs(input->formatted.flex_bytes));
+ fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
+ fdirvlan |= ntohs(input->formatted.vlan_id);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+
+ /* record source and destination port (little-endian)*/
+ fdirport = ntohs(input->formatted.dst_port);
+ fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
+ fdirport |= ntohs(input->formatted.src_port);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
+
+ /* record the first 32 bits of the destination address (big-endian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
+
+ /* record the source address (big-endian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
+
+ /* configure FDIRCMD register */
+ fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+ IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+ fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+ fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+
+ /* we only want the bucket hash so drop the upper 16 bits */
+ fdirhash = ixgbe_atr_compute_hash_82599(input,
+ IXGBE_ATR_BUCKET_HASH_KEY);
+ fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
return 0;
}
+
/**
* ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
* @hw: pointer to hardware structure
@@ -1924,6 +1764,7 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
hw->phy.ops.identify(hw);
if (hw->phy.type == ixgbe_phy_tn ||
+ hw->phy.type == ixgbe_phy_aq ||
hw->phy.type == ixgbe_phy_cu_unknown) {
hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
&ext_ability);
@@ -2125,51 +1966,6 @@ fw_version_out:
return status;
}
-/**
- * ixgbe_get_wwn_prefix_82599 - Get alternative WWNN/WWPN prefix from
- * the EEPROM
- * @hw: pointer to hardware structure
- * @wwnn_prefix: the alternative WWNN prefix
- * @wwpn_prefix: the alternative WWPN prefix
- *
- * This function will read the EEPROM from the alternative SAN MAC address
- * block to check the support for the alternative WWNN/WWPN prefix support.
- **/
-static s32 ixgbe_get_wwn_prefix_82599(struct ixgbe_hw *hw, u16 *wwnn_prefix,
- u16 *wwpn_prefix)
-{
- u16 offset, caps;
- u16 alt_san_mac_blk_offset;
-
- /* clear output first */
- *wwnn_prefix = 0xFFFF;
- *wwpn_prefix = 0xFFFF;
-
- /* check if alternative SAN MAC is supported */
- hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR,
- &alt_san_mac_blk_offset);
-
- if ((alt_san_mac_blk_offset == 0) ||
- (alt_san_mac_blk_offset == 0xFFFF))
- goto wwn_prefix_out;
-
- /* check capability in alternative san mac address block */
- offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
- hw->eeprom.ops.read(hw, offset, &caps);
- if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
- goto wwn_prefix_out;
-
- /* get the corresponding prefix for WWNN/WWPN */
- offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
- hw->eeprom.ops.read(hw, offset, wwnn_prefix);
-
- offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
- hw->eeprom.ops.read(hw, offset, wwpn_prefix);
-
-wwn_prefix_out:
- return 0;
-}
-
static struct ixgbe_mac_operations mac_ops_82599 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_82599,
@@ -2181,7 +1977,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
.get_mac_addr = &ixgbe_get_mac_addr_generic,
.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
.get_device_caps = &ixgbe_get_device_caps_82599,
- .get_wwn_prefix = &ixgbe_get_wwn_prefix_82599,
+ .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
.stop_adapter = &ixgbe_stop_adapter_generic,
.get_bus_info = &ixgbe_get_bus_info_generic,
.set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
@@ -2208,12 +2004,15 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
.fc_enable = &ixgbe_fc_enable_generic,
.init_uta_tables = &ixgbe_init_uta_tables_generic,
.setup_sfp = &ixgbe_setup_sfp_modules_82599,
+ .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing,
+ .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
};
static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
.init_params = &ixgbe_init_eeprom_params_generic,
.read = &ixgbe_read_eerd_generic,
.write = &ixgbe_write_eeprom_generic,
+ .calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
.validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
.update_checksum = &ixgbe_update_eeprom_checksum_generic,
};
@@ -2240,5 +2039,5 @@ struct ixgbe_info ixgbe_82599_info = {
.mac_ops = &mac_ops_82599,
.eeprom_ops = &eeprom_ops_82599,
.phy_ops = &phy_ops_82599,
- .mbx_ops = &mbx_ops_82599,
+ .mbx_ops = &mbx_ops_generic,
};