summaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe/ixgbe_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_common.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_common.c532
1 files changed, 458 insertions, 74 deletions
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index bcd952916eb2..b894b42a741c 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -54,6 +54,13 @@ static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw);
static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm);
static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
+static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
+static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+ u16 offset);
/**
* ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
@@ -96,6 +103,45 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
}
/**
+ * ixgbe_start_hw_gen2 - Init sequence for common device family
+ * @hw: pointer to hw structure
+ *
+ * Performs the init sequence common to the second generation
+ * of 10 GbE devices.
+ * Devices in the second generation:
+ * 82599
+ * X540
+ **/
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 regval;
+
+ /* Clear the rate limiters */
+ for (i = 0; i < hw->mac.max_tx_queues; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+ IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
+ }
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Disable relaxed ordering */
+ for (i = 0; i < hw->mac.max_tx_queues; i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+ regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+ }
+
+ for (i = 0; i < hw->mac.max_rx_queues; i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+ IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
+
+ return 0;
+}
+
+/**
* ixgbe_init_hw_generic - Generic hardware initialization
* @hw: pointer to hardware structure
*
@@ -464,7 +510,7 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
reg_val &= ~(IXGBE_RXCTRL_RXEN);
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val);
IXGBE_WRITE_FLUSH(hw);
- msleep(2);
+ usleep_range(2000, 4000);
/* Clear interrupt mask to stop from interrupts being generated */
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
@@ -545,6 +591,8 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
/* Set default semaphore delay to 10ms which is a well
* tested value */
eeprom->semaphore_delay = 10;
+ /* Clear EEPROM page size, it will be initialized as needed */
+ eeprom->word_page_size = 0;
/*
* Check for EEPROM present first.
@@ -577,26 +625,78 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
}
/**
- * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
* @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be written to
- * @data: 16 bit word to be written to the EEPROM
+ * @offset: offset within the EEPROM to write
+ * @words: number of words
+ * @data: 16 bit word(s) to write to EEPROM
*
- * If ixgbe_eeprom_update_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
**/
-s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
{
- s32 status;
- u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
+ s32 status = 0;
+ u16 i, count;
hw->eeprom.ops.init_params(hw);
- if (offset >= hw->eeprom.word_size) {
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset + words > hw->eeprom.word_size) {
status = IXGBE_ERR_EEPROM;
goto out;
}
+ /*
+ * The EEPROM page size cannot be queried from the chip. We do lazy
+ * initialization. It is worth to do that when we write large buffer.
+ */
+ if ((hw->eeprom.word_page_size == 0) &&
+ (words > IXGBE_EEPROM_PAGE_SIZE_MAX))
+ ixgbe_detect_eeprom_page_size_generic(hw, offset);
+
+ /*
+ * We cannot hold synchronization semaphores for too long
+ * to avoid other entity starvation. However it is more efficient
+ * to read in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+ count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+ IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i,
+ count, &data[i]);
+
+ if (status != 0)
+ break;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of word(s)
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * If ixgbe_eeprom_update_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status;
+ u16 word;
+ u16 page_size;
+ u16 i;
+ u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
+
/* Prepare the EEPROM for writing */
status = ixgbe_acquire_eeprom(hw);
@@ -608,62 +708,147 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
}
if (status == 0) {
- ixgbe_standby_eeprom(hw);
+ for (i = 0; i < words; i++) {
+ ixgbe_standby_eeprom(hw);
- /* Send the WRITE ENABLE command (8 bit opcode ) */
- ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_WREN_OPCODE_SPI,
- IXGBE_EEPROM_OPCODE_BITS);
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ ixgbe_shift_out_eeprom_bits(hw,
+ IXGBE_EEPROM_WREN_OPCODE_SPI,
+ IXGBE_EEPROM_OPCODE_BITS);
- ixgbe_standby_eeprom(hw);
+ ixgbe_standby_eeprom(hw);
- /*
- * Some SPI eeproms use the 8th address bit embedded in the
- * opcode
- */
- if ((hw->eeprom.address_bits == 8) && (offset >= 128))
- write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+ /*
+ * Some SPI eeproms use the 8th address bit embedded
+ * in the opcode
+ */
+ if ((hw->eeprom.address_bits == 8) &&
+ ((offset + i) >= 128))
+ write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, write_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+ hw->eeprom.address_bits);
+
+ page_size = hw->eeprom.word_page_size;
+
+ /* Send the data in burst via SPI*/
+ do {
+ word = data[i];
+ word = (word >> 8) | (word << 8);
+ ixgbe_shift_out_eeprom_bits(hw, word, 16);
+
+ if (page_size == 0)
+ break;
+
+ /* do not wrap around page */
+ if (((offset + i) & (page_size - 1)) ==
+ (page_size - 1))
+ break;
+ } while (++i < words);
+
+ ixgbe_standby_eeprom(hw);
+ usleep_range(10000, 20000);
+ }
+ /* Done with writing - release the EEPROM */
+ ixgbe_release_eeprom(hw);
+ }
- /* Send the Write command (8-bit opcode + addr) */
- ixgbe_shift_out_eeprom_bits(hw, write_opcode,
- IXGBE_EEPROM_OPCODE_BITS);
- ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
- hw->eeprom.address_bits);
+ return status;
+}
- /* Send the data */
- data = (data >> 8) | (data << 8);
- ixgbe_shift_out_eeprom_bits(hw, data, 16);
- ixgbe_standby_eeprom(hw);
+/**
+ * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @data: 16 bit word to be written to the EEPROM
+ *
+ * If ixgbe_eeprom_update_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ s32 status;
- /* Done with writing - release the EEPROM */
- ixgbe_release_eeprom(hw);
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
}
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data);
+
out:
return status;
}
/**
- * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
* @hw: pointer to hardware structure
* @offset: offset within the EEPROM to be read
- * @data: read 16 bit value from EEPROM
+ * @words: number of word(s)
+ * @data: read 16 bit words(s) from EEPROM
*
- * Reads 16 bit value from EEPROM through bit-bang method
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
**/
-s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
- u16 *data)
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
{
- s32 status;
- u16 word_in;
- u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+ s32 status = 0;
+ u16 i, count;
hw->eeprom.ops.init_params(hw);
- if (offset >= hw->eeprom.word_size) {
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset + words > hw->eeprom.word_size) {
status = IXGBE_ERR_EEPROM;
goto out;
}
+ /*
+ * We cannot hold synchronization semaphores for too long
+ * to avoid other entity starvation. However it is more efficient
+ * to read in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+ count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+ IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i,
+ count, &data[i]);
+
+ if (status != 0)
+ break;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @words: number of word(s)
+ * @data: read 16 bit word(s) from EEPROM
+ *
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status;
+ u16 word_in;
+ u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+ u16 i;
+
/* Prepare the EEPROM for reading */
status = ixgbe_acquire_eeprom(hw);
@@ -675,29 +860,145 @@ s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
}
if (status == 0) {
- ixgbe_standby_eeprom(hw);
+ for (i = 0; i < words; i++) {
+ ixgbe_standby_eeprom(hw);
+ /*
+ * Some SPI eeproms use the 8th address bit embedded
+ * in the opcode
+ */
+ if ((hw->eeprom.address_bits == 8) &&
+ ((offset + i) >= 128))
+ read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+ hw->eeprom.address_bits);
+
+ /* Read the data. */
+ word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
- /*
- * Some SPI eeproms use the 8th address bit embedded in the
- * opcode
- */
- if ((hw->eeprom.address_bits == 8) && (offset >= 128))
- read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+ /* End this read operation */
+ ixgbe_release_eeprom(hw);
+ }
- /* Send the READ command (opcode + addr) */
- ixgbe_shift_out_eeprom_bits(hw, read_opcode,
- IXGBE_EEPROM_OPCODE_BITS);
- ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
- hw->eeprom.address_bits);
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit value from EEPROM
+ *
+ * Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 *data)
+{
+ s32 status;
- /* Read the data. */
- word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
- *data = (word_in >> 8) | (word_in << 8);
+ hw->eeprom.ops.init_params(hw);
- /* End this read operation */
- ixgbe_release_eeprom(hw);
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of word(s)
+ * @data: 16 bit word(s) from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ u32 eerd;
+ s32 status = 0;
+ u32 i;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
}
+ for (i = 0; i < words; i++) {
+ eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) +
+ IXGBE_EEPROM_RW_REG_START;
+
+ IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
+
+ if (status == 0) {
+ data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
+ IXGBE_EEPROM_RW_REG_DATA);
+ } else {
+ hw_dbg(hw, "Eeprom read timed out\n");
+ goto out;
+ }
+ }
+out:
+ return status;
+}
+
+/**
+ * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be used as a scratch pad
+ *
+ * Discover EEPROM page size by writing marching data at given offset.
+ * This function is called only when we are writing a new large buffer
+ * at given offset so the data would be overwritten anyway.
+ **/
+static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+ u16 offset)
+{
+ u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX];
+ s32 status = 0;
+ u16 i;
+
+ for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++)
+ data[i] = i;
+
+ hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX;
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset,
+ IXGBE_EEPROM_PAGE_SIZE_MAX, data);
+ hw->eeprom.word_page_size = 0;
+ if (status != 0)
+ goto out;
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+ if (status != 0)
+ goto out;
+
+ /*
+ * When writing in burst more than the actual page size
+ * EEPROM address wraps around current page.
+ */
+ hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0];
+
+ hw_dbg(hw, "Detected EEPROM page size = %d words.",
+ hw->eeprom.word_page_size);
out:
return status;
}
@@ -712,33 +1013,75 @@ out:
**/
s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
- u32 eerd;
- s32 status;
+ return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data);
+}
+
+/**
+ * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ u32 eewr;
+ s32 status = 0;
+ u16 i;
hw->eeprom.ops.init_params(hw);
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
if (offset >= hw->eeprom.word_size) {
status = IXGBE_ERR_EEPROM;
goto out;
}
- eerd = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) +
- IXGBE_EEPROM_RW_REG_START;
+ for (i = 0; i < words; i++) {
+ eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+ (data[i] << IXGBE_EEPROM_RW_REG_DATA) |
+ IXGBE_EEPROM_RW_REG_START;
- IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
- status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+ if (status != 0) {
+ hw_dbg(hw, "Eeprom write EEWR timed out\n");
+ goto out;
+ }
- if (status == 0)
- *data = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
- IXGBE_EEPROM_RW_REG_DATA);
- else
- hw_dbg(hw, "Eeprom read timed out\n");
+ IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
+
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+ if (status != 0) {
+ hw_dbg(hw, "Eeprom write EEWR timed out\n");
+ goto out;
+ }
+ }
out:
return status;
}
/**
+ * ixgbe_write_eewr_generic - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data);
+}
+
+/**
* ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
* @hw: pointer to hardware structure
* @ee_reg: EEPROM flag for polling
@@ -746,7 +1089,7 @@ out:
* Polls the status bit (bit 1) of the EERD or EEWR to determine when the
* read or write is done respectively.
**/
-s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
+static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
{
u32 i;
u32 reg;
@@ -846,6 +1189,28 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
udelay(50);
}
+ if (i == timeout) {
+ hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore "
+ "not granted.\n");
+ /*
+ * this release is particularly important because our attempts
+ * above to get the semaphore may have succeeded, and if there
+ * was a timeout, we should unconditionally clear the semaphore
+ * bits to free the driver to make progress
+ */
+ ixgbe_release_eeprom_semaphore(hw);
+
+ udelay(50);
+ /*
+ * one last try
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (!(swsm & IXGBE_SWSM_SMBI))
+ status = 0;
+ }
+
/* Now get the semaphore between SW/FW through the SWESMBI bit */
if (status == 0) {
for (i = 0; i < timeout; i++) {
@@ -1112,8 +1477,12 @@ static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
- /* Delay before attempt to obtain semaphore again to allow FW access */
- msleep(hw->eeprom.semaphore_delay);
+ /*
+ * Delay before attempt to obtain semaphore again to allow FW
+ * access. semaphore_delay is in ms we need us for usleep_range
+ */
+ usleep_range(hw->eeprom.semaphore_delay * 1000,
+ hw->eeprom.semaphore_delay * 2000);
}
/**
@@ -2189,7 +2558,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
* thread currently using resource (swmask)
*/
ixgbe_release_eeprom_semaphore(hw);
- msleep(5);
+ usleep_range(5000, 10000);
timeout--;
}
@@ -2263,7 +2632,7 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
autoc_reg |= IXGBE_AUTOC_AN_RESTART;
autoc_reg |= IXGBE_AUTOC_FLU;
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
- msleep(10);
+ usleep_range(10000, 20000);
}
led_reg &= ~IXGBE_LED_MODE_MASK(index);
@@ -2883,3 +3252,18 @@ void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
pfvfspoof &= ~(1 << vf_target_shift);
IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
}
+
+/**
+ * ixgbe_get_device_caps_generic - Get additional device capabilities
+ * @hw: pointer to hardware structure
+ * @device_caps: the EEPROM word with the extra device capabilities
+ *
+ * This function will read the EEPROM location for the device capabilities,
+ * and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps)
+{
+ hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+ return 0;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 07:17:56 +0100