diff options
Diffstat (limited to 'drivers/net/ns83820.c')
| -rw-r--r-- | drivers/net/ns83820.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index a41b2cf4d917..3e4040f2f3cb 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -512,7 +512,7 @@ static void ns83820_vlan_rx_register(struct net_device *ndev, struct vlan_group /* Packet Receiver * * The hardware supports linked lists of receive descriptors for - * which ownership is transfered back and forth by means of an + * which ownership is transferred back and forth by means of an * ownership bit. While the hardware does support the use of a * ring for receive descriptors, we only make use of a chain in * an attempt to reduce bus traffic under heavy load scenarios. @@ -1147,7 +1147,7 @@ again: #ifdef NS83820_VLAN_ACCEL_SUPPORT if(vlan_tx_tag_present(skb)) { /* fetch the vlan tag info out of the - * ancilliary data if the vlan code + * ancillary data if the vlan code * is using hw vlan acceleration */ short tag = vlan_tx_tag_get(skb); @@ -1251,7 +1251,7 @@ static int ns83820_get_settings(struct net_device *ndev, /* * Here's the list of available ethtool commands from other drivers: * cmd->advertising = - * cmd->speed = + * ethtool_cmd_speed_set(cmd, ...) * cmd->duplex = * cmd->port = 0; * cmd->phy_address = @@ -1289,13 +1289,13 @@ static int ns83820_get_settings(struct net_device *ndev, cmd->duplex = fullduplex ? DUPLEX_FULL : DUPLEX_HALF; switch (cfg / CFG_SPDSTS0 & 3) { case 2: - cmd->speed = SPEED_1000; + ethtool_cmd_speed_set(cmd, SPEED_1000); break; case 1: - cmd->speed = SPEED_100; + ethtool_cmd_speed_set(cmd, SPEED_100); break; default: - cmd->speed = SPEED_10; + ethtool_cmd_speed_set(cmd, SPEED_10); break; } cmd->autoneg = (tbicr & TBICR_MR_AN_ENABLE) |