diff options
Diffstat (limited to 'drivers/net/phy/icplus.c')
-rw-r--r-- | drivers/net/phy/icplus.c | 386 |
1 files changed, 324 insertions, 62 deletions
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index b632947cbcdf..3e431737c1ba 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -37,16 +37,35 @@ MODULE_LICENSE("GPL"); #define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ #define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ #define IP101A_G_APS_ON BIT(1) /* IP101A/G APS Mode bit */ +#define IP101A_G_AUTO_MDIX_DIS BIT(11) #define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ #define IP101A_G_IRQ_PIN_USED BIT(15) /* INTR pin used */ #define IP101A_G_IRQ_ALL_MASK BIT(11) /* IRQ's inactive */ #define IP101A_G_IRQ_SPEED_CHANGE BIT(2) #define IP101A_G_IRQ_DUPLEX_CHANGE BIT(1) #define IP101A_G_IRQ_LINK_CHANGE BIT(0) +#define IP101A_G_PHY_STATUS 18 +#define IP101A_G_MDIX BIT(9) +#define IP101A_G_PHY_SPEC_CTRL 30 +#define IP101A_G_FORCE_MDIX BIT(3) +#define IP101G_PAGE_CONTROL 0x14 +#define IP101G_PAGE_CONTROL_MASK GENMASK(4, 0) #define IP101G_DIGITAL_IO_SPEC_CTRL 0x1d #define IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32 BIT(2) +#define IP101G_DEFAULT_PAGE 16 + +#define IP101G_P1_CNT_CTRL 17 +#define CNT_CTRL_RX_EN BIT(13) +#define IP101G_P8_CNT_CTRL 17 +#define CNT_CTRL_RDCLR_EN BIT(15) +#define IP101G_CNT_REG 18 + +#define IP175C_PHY_ID 0x02430d80 +#define IP1001_PHY_ID 0x02430d90 +#define IP101A_PHY_ID 0x02430c54 + /* The 32-pin IP101GR package can re-configure the mode of the RXER/INTR_32 pin * (pin number 21). The hardware default is RXER (receive error) mode. But it * can be configured to interrupt mode manually. @@ -57,8 +76,19 @@ enum ip101gr_sel_intr32 { IP101GR_SEL_INTR32_RXER, }; +struct ip101g_hw_stat { + const char *name; + int page; +}; + +static struct ip101g_hw_stat ip101g_hw_stats[] = { + { "phy_crc_errors", 1 }, + { "phy_symbol_errors", 11, }, +}; + struct ip101a_g_phy_priv { enum ip101gr_sel_intr32 sel_intr32; + u64 stats[ARRAY_SIZE(ip101g_hw_stats)]; }; static int ip175c_config_init(struct phy_device *phydev) @@ -116,36 +146,10 @@ static int ip175c_config_init(struct phy_device *phydev) return 0; } -static int ip1xx_reset(struct phy_device *phydev) -{ - int bmcr; - - /* Software Reset PHY */ - bmcr = phy_read(phydev, MII_BMCR); - if (bmcr < 0) - return bmcr; - bmcr |= BMCR_RESET; - bmcr = phy_write(phydev, MII_BMCR, bmcr); - if (bmcr < 0) - return bmcr; - - do { - bmcr = phy_read(phydev, MII_BMCR); - if (bmcr < 0) - return bmcr; - } while (bmcr & BMCR_RESET); - - return 0; -} - static int ip1001_config_init(struct phy_device *phydev) { int c; - c = ip1xx_reset(phydev); - if (c < 0) - return c; - /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2); if (c < 0) @@ -184,7 +188,7 @@ static int ip175c_read_status(struct phy_device *phydev) genphy_read_status(phydev); else /* Don't need to read status for switch ports */ - phydev->irq = PHY_IGNORE_INTERRUPT; + phydev->irq = PHY_MAC_INTERRUPT; return 0; } @@ -228,30 +232,30 @@ static int ip101a_g_probe(struct phy_device *phydev) return 0; } -static int ip101a_g_config_init(struct phy_device *phydev) +static int ip101a_g_config_intr_pin(struct phy_device *phydev) { struct ip101a_g_phy_priv *priv = phydev->priv; - int err, c; + int oldpage, err = 0; - c = ip1xx_reset(phydev); - if (c < 0) - return c; + oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE); + if (oldpage < 0) + return oldpage; /* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */ switch (priv->sel_intr32) { case IP101GR_SEL_INTR32_RXER: - err = phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, - IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, 0); + err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, + IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, 0); if (err < 0) - return err; + goto out; break; case IP101GR_SEL_INTR32_INTR: - err = phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, - IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, - IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32); + err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, + IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, + IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32); if (err < 0) - return err; + goto out; break; default: @@ -265,17 +269,135 @@ static int ip101a_g_config_init(struct phy_device *phydev) break; } +out: + return phy_restore_page(phydev, oldpage, err); +} + +static int ip101a_config_init(struct phy_device *phydev) +{ + int ret; + /* Enable Auto Power Saving mode */ - c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); - c |= IP101A_G_APS_ON; + ret = phy_set_bits(phydev, IP10XX_SPEC_CTRL_STATUS, IP101A_G_APS_ON); + if (ret) + return ret; + + return ip101a_g_config_intr_pin(phydev); +} + +static int ip101g_config_init(struct phy_device *phydev) +{ + int ret; + + /* Enable the PHY counters */ + ret = phy_modify_paged(phydev, 1, IP101G_P1_CNT_CTRL, + CNT_CTRL_RX_EN, CNT_CTRL_RX_EN); + if (ret) + return ret; + + /* Clear error counters on read */ + ret = phy_modify_paged(phydev, 8, IP101G_P8_CNT_CTRL, + CNT_CTRL_RDCLR_EN, CNT_CTRL_RDCLR_EN); + if (ret) + return ret; + + return ip101a_g_config_intr_pin(phydev); +} + +static int ip101a_g_read_status(struct phy_device *phydev) +{ + int oldpage, ret, stat1, stat2; + + ret = genphy_read_status(phydev); + if (ret) + return ret; + + oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE); + if (oldpage < 0) + return oldpage; + + ret = __phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); + if (ret < 0) + goto out; + stat1 = ret; + + ret = __phy_read(phydev, IP101A_G_PHY_SPEC_CTRL); + if (ret < 0) + goto out; + stat2 = ret; + + if (stat1 & IP101A_G_AUTO_MDIX_DIS) { + if (stat2 & IP101A_G_FORCE_MDIX) + phydev->mdix_ctrl = ETH_TP_MDI_X; + else + phydev->mdix_ctrl = ETH_TP_MDI; + } else { + phydev->mdix_ctrl = ETH_TP_MDI_AUTO; + } + + if (stat2 & IP101A_G_MDIX) + phydev->mdix = ETH_TP_MDI_X; + else + phydev->mdix = ETH_TP_MDI; + + ret = 0; + +out: + return phy_restore_page(phydev, oldpage, ret); +} + +static int ip101a_g_config_mdix(struct phy_device *phydev) +{ + u16 ctrl = 0, ctrl2 = 0; + int oldpage, ret; + + switch (phydev->mdix_ctrl) { + case ETH_TP_MDI: + ctrl = IP101A_G_AUTO_MDIX_DIS; + break; + case ETH_TP_MDI_X: + ctrl = IP101A_G_AUTO_MDIX_DIS; + ctrl2 = IP101A_G_FORCE_MDIX; + break; + case ETH_TP_MDI_AUTO: + break; + default: + return 0; + } + + oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE); + if (oldpage < 0) + return oldpage; - return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); + ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS, + IP101A_G_AUTO_MDIX_DIS, ctrl); + if (ret) + goto out; + + ret = __phy_modify(phydev, IP101A_G_PHY_SPEC_CTRL, + IP101A_G_FORCE_MDIX, ctrl2); + +out: + return phy_restore_page(phydev, oldpage, ret); +} + +static int ip101a_g_config_aneg(struct phy_device *phydev) +{ + int ret; + + ret = ip101a_g_config_mdix(phydev); + if (ret) + return ret; + + return genphy_config_aneg(phydev); } static int ip101a_g_ack_interrupt(struct phy_device *phydev) { - int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS); + int err; + err = phy_read_paged(phydev, IP101G_DEFAULT_PAGE, + IP101A_G_IRQ_CONF_STATUS); if (err < 0) return err; @@ -294,10 +416,12 @@ static int ip101a_g_config_intr(struct phy_device *phydev) /* INTR pin used: Speed/link/duplex will cause an interrupt */ val = IP101A_G_IRQ_PIN_USED; - err = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, val); + err = phy_write_paged(phydev, IP101G_DEFAULT_PAGE, + IP101A_G_IRQ_CONF_STATUS, val); } else { val = IP101A_G_IRQ_ALL_MASK; - err = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, val); + err = phy_write_paged(phydev, IP101G_DEFAULT_PAGE, + IP101A_G_IRQ_CONF_STATUS, val); if (err) return err; @@ -311,7 +435,8 @@ static irqreturn_t ip101a_g_handle_interrupt(struct phy_device *phydev) { int irq_status; - irq_status = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS); + irq_status = phy_read_paged(phydev, IP101G_DEFAULT_PAGE, + IP101A_G_IRQ_CONF_STATUS); if (irq_status < 0) { phy_error(phydev); return IRQ_NONE; @@ -327,34 +452,171 @@ static irqreturn_t ip101a_g_handle_interrupt(struct phy_device *phydev) return IRQ_HANDLED; } +/* The IP101A doesn't really have a page register. We just pretend to have one + * so we can use the paged versions of the callbacks of the IP101G. + */ +static int ip101a_read_page(struct phy_device *phydev) +{ + return IP101G_DEFAULT_PAGE; +} + +static int ip101a_write_page(struct phy_device *phydev, int page) +{ + WARN_ONCE(page != IP101G_DEFAULT_PAGE, "wrong page selected\n"); + + return 0; +} + +static int ip101g_read_page(struct phy_device *phydev) +{ + return __phy_read(phydev, IP101G_PAGE_CONTROL); +} + +static int ip101g_write_page(struct phy_device *phydev, int page) +{ + return __phy_write(phydev, IP101G_PAGE_CONTROL, page); +} + +static int ip101a_g_has_page_register(struct phy_device *phydev) +{ + int oldval, val, ret; + + oldval = phy_read(phydev, IP101G_PAGE_CONTROL); + if (oldval < 0) + return oldval; + + ret = phy_write(phydev, IP101G_PAGE_CONTROL, 0xffff); + if (ret) + return ret; + + val = phy_read(phydev, IP101G_PAGE_CONTROL); + if (val < 0) + return val; + + ret = phy_write(phydev, IP101G_PAGE_CONTROL, oldval); + if (ret) + return ret; + + return val == IP101G_PAGE_CONTROL_MASK; +} + +static int ip101a_g_match_phy_device(struct phy_device *phydev, bool ip101a) +{ + int ret; + + if (phydev->phy_id != IP101A_PHY_ID) + return 0; + + /* The IP101A and the IP101G share the same PHY identifier.The IP101G + * seems to be a successor of the IP101A and implements more functions. + * Amongst other things there is a page select register, which is not + * available on the IP101A. Use this to distinguish these two. + */ + ret = ip101a_g_has_page_register(phydev); + if (ret < 0) + return ret; + + return ip101a == !ret; +} + +static int ip101a_match_phy_device(struct phy_device *phydev) +{ + return ip101a_g_match_phy_device(phydev, true); +} + +static int ip101g_match_phy_device(struct phy_device *phydev) +{ + return ip101a_g_match_phy_device(phydev, false); +} + +static int ip101g_get_sset_count(struct phy_device *phydev) +{ + return ARRAY_SIZE(ip101g_hw_stats); +} + +static void ip101g_get_strings(struct phy_device *phydev, u8 *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ip101g_hw_stats); i++) + strscpy(data + i * ETH_GSTRING_LEN, + ip101g_hw_stats[i].name, ETH_GSTRING_LEN); +} + +static u64 ip101g_get_stat(struct phy_device *phydev, int i) +{ + struct ip101g_hw_stat stat = ip101g_hw_stats[i]; + struct ip101a_g_phy_priv *priv = phydev->priv; + int val; + u64 ret; + + val = phy_read_paged(phydev, stat.page, IP101G_CNT_REG); + if (val < 0) { + ret = U64_MAX; + } else { + priv->stats[i] += val; + ret = priv->stats[i]; + } + + return ret; +} + +static void ip101g_get_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ip101g_hw_stats); i++) + data[i] = ip101g_get_stat(phydev, i); +} + static struct phy_driver icplus_driver[] = { { - .phy_id = 0x02430d80, + PHY_ID_MATCH_MODEL(IP175C_PHY_ID), .name = "ICPlus IP175C", - .phy_id_mask = 0x0ffffff0, /* PHY_BASIC_FEATURES */ - .config_init = &ip175c_config_init, - .config_aneg = &ip175c_config_aneg, - .read_status = &ip175c_read_status, + .config_init = ip175c_config_init, + .config_aneg = ip175c_config_aneg, + .read_status = ip175c_read_status, .suspend = genphy_suspend, .resume = genphy_resume, }, { - .phy_id = 0x02430d90, + PHY_ID_MATCH_MODEL(IP1001_PHY_ID), .name = "ICPlus IP1001", - .phy_id_mask = 0x0ffffff0, /* PHY_GBIT_FEATURES */ - .config_init = &ip1001_config_init, + .config_init = ip1001_config_init, + .soft_reset = genphy_soft_reset, .suspend = genphy_suspend, .resume = genphy_resume, }, { - .phy_id = 0x02430c54, - .name = "ICPlus IP101A/G", - .phy_id_mask = 0x0ffffff0, - /* PHY_BASIC_FEATURES */ + .name = "ICPlus IP101A", + .match_phy_device = ip101a_match_phy_device, + .probe = ip101a_g_probe, + .read_page = ip101a_read_page, + .write_page = ip101a_write_page, + .config_intr = ip101a_g_config_intr, + .handle_interrupt = ip101a_g_handle_interrupt, + .config_init = ip101a_config_init, + .config_aneg = ip101a_g_config_aneg, + .read_status = ip101a_g_read_status, + .soft_reset = genphy_soft_reset, + .suspend = genphy_suspend, + .resume = genphy_resume, +}, { + .name = "ICPlus IP101G", + .match_phy_device = ip101g_match_phy_device, .probe = ip101a_g_probe, + .read_page = ip101g_read_page, + .write_page = ip101g_write_page, .config_intr = ip101a_g_config_intr, .handle_interrupt = ip101a_g_handle_interrupt, - .config_init = &ip101a_g_config_init, + .config_init = ip101g_config_init, + .config_aneg = ip101a_g_config_aneg, + .read_status = ip101a_g_read_status, + .soft_reset = genphy_soft_reset, + .get_sset_count = ip101g_get_sset_count, + .get_strings = ip101g_get_strings, + .get_stats = ip101g_get_stats, .suspend = genphy_suspend, .resume = genphy_resume, } }; @@ -362,9 +624,9 @@ static struct phy_driver icplus_driver[] = { module_phy_driver(icplus_driver); static struct mdio_device_id __maybe_unused icplus_tbl[] = { - { 0x02430d80, 0x0ffffff0 }, - { 0x02430d90, 0x0ffffff0 }, - { 0x02430c54, 0x0ffffff0 }, + { PHY_ID_MATCH_MODEL(IP175C_PHY_ID) }, + { PHY_ID_MATCH_MODEL(IP1001_PHY_ID) }, + { PHY_ID_MATCH_EXACT(IP101A_PHY_ID) }, { } }; |