summaryrefslogtreecommitdiffstats
path: root/drivers/net/r8169.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/r8169.c')
-rw-r--r--drivers/net/r8169.c29
1 files changed, 24 insertions, 5 deletions
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 7193afc00e47..96740051cdcc 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -186,7 +186,12 @@ static DEFINE_PCI_DEVICE_TABLE(rtl8169_pci_tbl) = {
MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl);
-static int rx_copybreak = 200;
+/*
+ * we set our copybreak very high so that we don't have
+ * to allocate 16k frames all the time (see note in
+ * rtl8169_open()
+ */
+static int rx_copybreak = 16383;
static int use_dac;
static struct {
u32 msg_enable;
@@ -3217,9 +3222,13 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
}
static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
- struct net_device *dev)
+ unsigned int mtu)
{
- unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+ unsigned int max_frame = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+ if (max_frame != 16383)
+ printk(KERN_WARNING "WARNING! Changing of MTU on this NIC"
+ "May lead to frame reception errors!\n");
tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE;
}
@@ -3231,7 +3240,17 @@ static int rtl8169_open(struct net_device *dev)
int retval = -ENOMEM;
- rtl8169_set_rxbufsize(tp, dev);
+ /*
+ * Note that we use a magic value here, its wierd I know
+ * its done because, some subset of rtl8169 hardware suffers from
+ * a problem in which frames received that are longer than
+ * the size set in RxMaxSize register return garbage sizes
+ * when received. To avoid this we need to turn off filtering,
+ * which is done by setting a value of 16383 in the RxMaxSize register
+ * and allocating 16k frames to handle the largest possible rx value
+ * thats what the magic math below does.
+ */
+ rtl8169_set_rxbufsize(tp, 16383 - VLAN_ETH_HLEN - ETH_FCS_LEN);
/*
* Rx and Tx desscriptors needs 256 bytes alignment.
@@ -3884,7 +3903,7 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
rtl8169_down(dev);
- rtl8169_set_rxbufsize(tp, dev);
+ rtl8169_set_rxbufsize(tp, dev->mtu);
ret = rtl8169_init_ring(dev);
if (ret < 0)