diff options
Diffstat (limited to 'drivers/net/sfc/sfe4001.c')
| -rw-r--r-- | drivers/net/sfc/sfe4001.c | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c new file mode 100644 index 000000000000..11fa9fb8f48b --- /dev/null +++ b/drivers/net/sfc/sfe4001.c @@ -0,0 +1,252 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2007 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +/***************************************************************************** + * Support for the SFE4001 NIC: driver code for the PCA9539 I/O expander that + * controls the PHY power rails, and for the MAX6647 temp. sensor used to check + * the PHY + */ +#include <linux/delay.h> +#include "efx.h" +#include "phy.h" +#include "boards.h" +#include "falcon.h" +#include "falcon_hwdefs.h" +#include "mac.h" + +/************************************************************************** + * + * I2C IO Expander device + * + **************************************************************************/ +#define PCA9539 0x74 + +#define P0_IN 0x00 +#define P0_OUT 0x02 +#define P0_INVERT 0x04 +#define P0_CONFIG 0x06 + +#define P0_EN_1V0X_LBN 0 +#define P0_EN_1V0X_WIDTH 1 +#define P0_EN_1V2_LBN 1 +#define P0_EN_1V2_WIDTH 1 +#define P0_EN_2V5_LBN 2 +#define P0_EN_2V5_WIDTH 1 +#define P0_EN_3V3X_LBN 3 +#define P0_EN_3V3X_WIDTH 1 +#define P0_EN_5V_LBN 4 +#define P0_EN_5V_WIDTH 1 +#define P0_SHORTEN_JTAG_LBN 5 +#define P0_SHORTEN_JTAG_WIDTH 1 +#define P0_X_TRST_LBN 6 +#define P0_X_TRST_WIDTH 1 +#define P0_DSP_RESET_LBN 7 +#define P0_DSP_RESET_WIDTH 1 + +#define P1_IN 0x01 +#define P1_OUT 0x03 +#define P1_INVERT 0x05 +#define P1_CONFIG 0x07 + +#define P1_AFE_PWD_LBN 0 +#define P1_AFE_PWD_WIDTH 1 +#define P1_DSP_PWD25_LBN 1 +#define P1_DSP_PWD25_WIDTH 1 +#define P1_RESERVED_LBN 2 +#define P1_RESERVED_WIDTH 2 +#define P1_SPARE_LBN 4 +#define P1_SPARE_WIDTH 4 + + +/************************************************************************** + * + * Temperature Sensor + * + **************************************************************************/ +#define MAX6647 0x4e + +#define RLTS 0x00 +#define RLTE 0x01 +#define RSL 0x02 +#define RCL 0x03 +#define RCRA 0x04 +#define RLHN 0x05 +#define RLLI 0x06 +#define RRHI 0x07 +#define RRLS 0x08 +#define WCRW 0x0a +#define WLHO 0x0b +#define WRHA 0x0c +#define WRLN 0x0e +#define OSHT 0x0f +#define REET 0x10 +#define RIET 0x11 +#define RWOE 0x19 +#define RWOI 0x20 +#define HYS 0x21 +#define QUEUE 0x22 +#define MFID 0xfe +#define REVID 0xff + +/* Status bits */ +#define MAX6647_BUSY (1 << 7) /* ADC is converting */ +#define MAX6647_LHIGH (1 << 6) /* Local high temp. alarm */ +#define MAX6647_LLOW (1 << 5) /* Local low temp. alarm */ +#define MAX6647_RHIGH (1 << 4) /* Remote high temp. alarm */ +#define MAX6647_RLOW (1 << 3) /* Remote low temp. alarm */ +#define MAX6647_FAULT (1 << 2) /* DXN/DXP short/open circuit */ +#define MAX6647_EOT (1 << 1) /* Remote junction overtemp. */ +#define MAX6647_IOT (1 << 0) /* Local junction overtemp. */ + +static const u8 xgphy_max_temperature = 90; + +void sfe4001_poweroff(struct efx_nic *efx) +{ + struct efx_i2c_interface *i2c = &efx->i2c; + + u8 cfg, out, in; + + EFX_INFO(efx, "%s\n", __func__); + + /* Turn off all power rails */ + out = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + + /* Disable port 1 outputs on IO expander */ + cfg = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + + /* Disable port 0 outputs on IO expander */ + cfg = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); + + /* Clear any over-temperature alert */ + (void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1); +} + +/* This board uses an I2C expander to provider power to the PHY, which needs to + * be turned on before the PHY can be used. + * Context: Process context, rtnl lock held + */ +int sfe4001_poweron(struct efx_nic *efx) +{ + struct efx_i2c_interface *i2c = &efx->i2c; + unsigned int count; + int rc; + u8 out, in, cfg; + efx_dword_t reg; + + /* 10Xpress has fixed-function LED pins, so there is no board-specific + * blink code. */ + efx->board_info.blink = tenxpress_phy_blink; + + /* Ensure that XGXS and XAUI SerDes are held in reset */ + EFX_POPULATE_DWORD_7(reg, XX_PWRDNA_EN, 1, + XX_PWRDNB_EN, 1, + XX_RSTPLLAB_EN, 1, + XX_RESETA_EN, 1, + XX_RESETB_EN, 1, + XX_RSTXGXSRX_EN, 1, + XX_RSTXGXSTX_EN, 1); + falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + udelay(10); + + /* Set DSP over-temperature alert threshold */ + EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature); + rc = efx_i2c_write(i2c, MAX6647, WLHO, + &xgphy_max_temperature, 1); + if (rc) + goto fail1; + + /* Read it back and verify */ + rc = efx_i2c_read(i2c, MAX6647, RLHN, &in, 1); + if (rc) + goto fail1; + if (in != xgphy_max_temperature) { + rc = -EFAULT; + goto fail1; + } + + /* Clear any previous over-temperature alert */ + rc = efx_i2c_read(i2c, MAX6647, RSL, &in, 1); + if (rc) + goto fail1; + + /* Enable port 0 and port 1 outputs on IO expander */ + cfg = 0x00; + rc = efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); + if (rc) + goto fail1; + cfg = 0xff & ~(1 << P1_SPARE_LBN); + rc = efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + if (rc) + goto fail2; + + /* Turn all power off then wait 1 sec. This ensures PHY is reset */ + out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) | + (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) | + (0 << P0_EN_1V0X_LBN)); + rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + if (rc) + goto fail3; + + schedule_timeout_uninterruptible(HZ); + count = 0; + do { + /* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */ + out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) | + (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) | + (1 << P0_X_TRST_LBN)); + + rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + if (rc) + goto fail3; + msleep(10); + + /* Turn on 1V power rail */ + out &= ~(1 << P0_EN_1V0X_LBN); + rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + if (rc) + goto fail3; + + EFX_INFO(efx, "waiting for power (attempt %d)...\n", count); + + schedule_timeout_uninterruptible(HZ); + + /* Check DSP is powered */ + rc = efx_i2c_read(i2c, PCA9539, P1_IN, &in, 1); + if (rc) + goto fail3; + if (in & (1 << P1_AFE_PWD_LBN)) + goto done; + + } while (++count < 20); + + EFX_INFO(efx, "timed out waiting for power\n"); + rc = -ETIMEDOUT; + goto fail3; + +done: + EFX_INFO(efx, "PHY is powered on\n"); + return 0; + +fail3: + /* Turn off all power rails */ + out = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + /* Disable port 1 outputs on IO expander */ + out = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1); +fail2: + /* Disable port 0 outputs on IO expander */ + out = 0xff; + (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1); +fail1: + return rc; +} |