diff options
Diffstat (limited to 'drivers/net/sky2.h')
-rw-r--r-- | drivers/net/sky2.h | 129 |
1 files changed, 57 insertions, 72 deletions
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index dce4d276d443..49ee264064ab 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -18,14 +18,6 @@ enum { PCI_CFG_REG_1 = 0x94, }; -enum { - PEX_DEV_CAP = 0xe4, - PEX_DEV_CTRL = 0xe8, - PEX_DEV_STA = 0xea, - PEX_LNK_STAT = 0xf2, - PEX_UNC_ERR_STAT= 0x104, -}; - /* Yukon-2 */ enum pci_dev_reg_1 { PCI_Y2_PIG_ENA = 1<<31, /* Enable Plug-in-Go (YUKON-2) */ @@ -151,38 +143,6 @@ enum pci_cfg_reg1 { PCI_STATUS_REC_TARGET_ABORT | \ PCI_STATUS_PARITY) -enum pex_dev_ctrl { - PEX_DC_MAX_RRS_MSK = 7<<12, /* Bit 14..12: Max. Read Request Size */ - PEX_DC_EN_NO_SNOOP = 1<<11,/* Enable No Snoop */ - PEX_DC_EN_AUX_POW = 1<<10,/* Enable AUX Power */ - PEX_DC_EN_PHANTOM = 1<<9, /* Enable Phantom Functions */ - PEX_DC_EN_EXT_TAG = 1<<8, /* Enable Extended Tag Field */ - PEX_DC_MAX_PLS_MSK = 7<<5, /* Bit 7.. 5: Max. Payload Size Mask */ - PEX_DC_EN_REL_ORD = 1<<4, /* Enable Relaxed Ordering */ - PEX_DC_EN_UNS_RQ_RP = 1<<3, /* Enable Unsupported Request Reporting */ - PEX_DC_EN_FAT_ER_RP = 1<<2, /* Enable Fatal Error Reporting */ - PEX_DC_EN_NFA_ER_RP = 1<<1, /* Enable Non-Fatal Error Reporting */ - PEX_DC_EN_COR_ER_RP = 1<<0, /* Enable Correctable Error Reporting */ -}; -#define PEX_DC_MAX_RD_RQ_SIZE(x) (((x)<<12) & PEX_DC_MAX_RRS_MSK) - -/* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */ -enum pex_err { - PEX_UNSUP_REQ = 1<<20, /* Unsupported Request Error */ - - PEX_MALFOR_TLP = 1<<18, /* Malformed TLP */ - - PEX_UNEXP_COMP = 1<<16, /* Unexpected Completion */ - - PEX_COMP_TO = 1<<14, /* Completion Timeout */ - PEX_FLOW_CTRL_P = 1<<13, /* Flow Control Protocol Error */ - PEX_POIS_TLP = 1<<12, /* Poisoned TLP */ - - PEX_DATA_LINK_P = 1<<4, /* Data Link Protocol Error */ - PEX_FATAL_ERRORS= (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P), -}; - - enum csr_regs { B0_RAP = 0x0000, B0_CTST = 0x0004, @@ -419,7 +379,6 @@ enum { Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2, Y2_HWE_ALL_MASK = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | - Y2_IS_PCI_EXP | Y2_HWE_L1_MASK | Y2_HWE_L2_MASK, }; @@ -470,18 +429,24 @@ enum { CHIP_ID_YUKON_EX = 0xb5, /* Chip ID for YUKON-2 Extreme */ CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */ CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */ - + CHIP_ID_YUKON_FE_P = 0xb8, /* Chip ID for YUKON-2 FE+ */ +}; +enum yukon_ec_rev { CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */ CHIP_REV_YU_EC_A2 = 1, /* Chip Rev. for Yukon-EC A2 */ CHIP_REV_YU_EC_A3 = 2, /* Chip Rev. for Yukon-EC A3 */ - +}; +enum yukon_ec_u_rev { CHIP_REV_YU_EC_U_A0 = 1, CHIP_REV_YU_EC_U_A1 = 2, CHIP_REV_YU_EC_U_B0 = 3, - +}; +enum yukon_fe_rev { CHIP_REV_YU_FE_A1 = 1, CHIP_REV_YU_FE_A2 = 2, - +}; +enum yukon_fe_p_rev { + CHIP_REV_YU_FE2_A0 = 0, }; enum yukon_ex_rev { CHIP_REV_YU_EX_A0 = 1, @@ -1668,7 +1633,7 @@ enum { /* Receive Frame Status Encoding */ enum { - GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */ + GMR_FS_LEN = 0x7fff<<16, /* Bit 30..16: Rx Frame Length */ GMR_FS_VLAN = 1<<13, /* VLAN Packet */ GMR_FS_JABBER = 1<<12, /* Jabber Packet */ GMR_FS_UN_SIZE = 1<<11, /* Undersize Packet */ @@ -1729,6 +1694,10 @@ enum { GMF_RX_CTRL_DEF = GMF_OPER_ON | GMF_RX_F_FL_ON, }; +/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ +enum { + TX_DYN_WM_ENA = 3, /* Yukon-FE+ specific */ +}; /* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ enum { @@ -1840,6 +1809,28 @@ enum { /* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ enum { + GPC_TX_PAUSE = 1<<30, /* Tx pause enabled (ro) */ + GPC_RX_PAUSE = 1<<29, /* Rx pause enabled (ro) */ + GPC_SPEED = 3<<27, /* PHY speed (ro) */ + GPC_LINK = 1<<26, /* Link up (ro) */ + GPC_DUPLEX = 1<<25, /* Duplex (ro) */ + GPC_CLOCK = 1<<24, /* 125Mhz clock stable (ro) */ + + GPC_PDOWN = 1<<23, /* Internal regulator 2.5 power down */ + GPC_TSTMODE = 1<<22, /* Test mode */ + GPC_REG18 = 1<<21, /* Reg18 Power down */ + GPC_REG12SEL = 3<<19, /* Reg12 power setting */ + GPC_REG18SEL = 3<<17, /* Reg18 power setting */ + GPC_SPILOCK = 1<<16, /* SPI lock (ASF) */ + + GPC_LEDMUX = 3<<14, /* LED Mux */ + GPC_INTPOL = 1<<13, /* Interrupt polarity */ + GPC_DETECT = 1<<12, /* Energy detect */ + GPC_1000HD = 1<<11, /* Enable 1000Mbit HD */ + GPC_SLAVE = 1<<10, /* Slave mode */ + GPC_PAUSE = 1<<9, /* Pause enable */ + GPC_LEDCTL = 3<<6, /* GPHY Leds */ + GPC_RST_CLR = 1<<1, /* Clear GPHY Reset */ GPC_RST_SET = 1<<0, /* Set GPHY Reset */ }; @@ -2017,6 +2008,14 @@ struct sky2_port { u16 rx_tag; struct vlan_group *vlgrp; #endif + struct { + unsigned long last; + u32 mac_rp; + u8 mac_lev; + u8 fifo_rp; + u8 fifo_lev; + } check; + dma_addr_t rx_le_map; dma_addr_t tx_le_map; @@ -2032,14 +2031,22 @@ struct sky2_port { #ifdef CONFIG_SKY2_DEBUG struct dentry *debugfs; #endif - struct net_device_stats net_stats; - }; struct sky2_hw { void __iomem *regs; struct pci_dev *pdev; + struct napi_struct napi; struct net_device *dev[2]; + unsigned long flags; +#define SKY2_HW_USE_MSI 0x00000001 +#define SKY2_HW_FIBRE_PHY 0x00000002 +#define SKY2_HW_GIGABIT 0x00000004 +#define SKY2_HW_NEWER_PHY 0x00000008 +#define SKY2_HW_FIFO_HANG_CHECK 0x00000010 +#define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */ +#define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */ +#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */ u8 chip_id; u8 chip_rev; @@ -2050,15 +2057,14 @@ struct sky2_hw { u32 st_idx; dma_addr_t st_dma; - struct timer_list idle_timer; + struct timer_list watchdog_timer; struct work_struct restart_work; - int msi; wait_queue_head_t msi_wait; }; static inline int sky2_is_copper(const struct sky2_hw *hw) { - return !(hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P'); + return !(hw->flags & SKY2_HW_FIBRE_PHY); } /* Register accessor for memory mapped device */ @@ -2121,25 +2127,4 @@ static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg, gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8)); gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8)); } - -/* PCI config space access */ -static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg) -{ - return sky2_read32(hw, Y2_CFG_SPC + reg); -} - -static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg) -{ - return sky2_read16(hw, Y2_CFG_SPC + reg); -} - -static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val) -{ - sky2_write32(hw, Y2_CFG_SPC + reg, val); -} - -static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val) -{ - sky2_write16(hw, Y2_CFG_SPC + reg, val); -} #endif |