diff options
Diffstat (limited to 'drivers/net/tokenring/madgemc.c')
| -rw-r--r-- | drivers/net/tokenring/madgemc.c | 761 |
1 files changed, 0 insertions, 761 deletions
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c deleted file mode 100644 index 28adcdf3b14c..000000000000 --- a/drivers/net/tokenring/madgemc.c +++ /dev/null @@ -1,761 +0,0 @@ -/* - * madgemc.c: Driver for the Madge Smart 16/4 MC16 MCA token ring card. - * - * Written 2000 by Adam Fritzler - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * This driver module supports the following cards: - * - Madge Smart 16/4 Ringnode MC16 - * - Madge Smart 16/4 Ringnode MC32 (??) - * - * Maintainer(s): - * AF Adam Fritzler - * - * Modification History: - * 16-Jan-00 AF Created - * - */ -static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n"; - -#include <linux/module.h> -#include <linux/mca.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#include "tms380tr.h" -#include "madgemc.h" /* Madge-specific constants */ - -#define MADGEMC_IO_EXTENT 32 -#define MADGEMC_SIF_OFFSET 0x08 - -struct card_info { - /* - * These are read from the BIA ROM. - */ - unsigned int manid; - unsigned int cardtype; - unsigned int cardrev; - unsigned int ramsize; - - /* - * These are read from the MCA POS registers. - */ - unsigned int burstmode:2; - unsigned int fairness:1; /* 0 = Fair, 1 = Unfair */ - unsigned int arblevel:4; - unsigned int ringspeed:2; /* 0 = 4mb, 1 = 16, 2 = Auto/none */ - unsigned int cabletype:1; /* 0 = RJ45, 1 = DB9 */ -}; - -static int madgemc_open(struct net_device *dev); -static int madgemc_close(struct net_device *dev); -static int madgemc_chipset_init(struct net_device *dev); -static void madgemc_read_rom(struct net_device *dev, struct card_info *card); -static unsigned short madgemc_setnselout_pins(struct net_device *dev); -static void madgemc_setcabletype(struct net_device *dev, int type); - -static int madgemc_mcaproc(char *buf, int slot, void *d); - -static void madgemc_setregpage(struct net_device *dev, int page); -static void madgemc_setsifsel(struct net_device *dev, int val); -static void madgemc_setint(struct net_device *dev, int val); - -static irqreturn_t madgemc_interrupt(int irq, void *dev_id); - -/* - * These work around paging, however they don't guarantee you're on the - * right page. - */ -#define SIFREADB(reg) (inb(dev->base_addr + ((reg<0x8)?reg:reg-0x8))) -#define SIFWRITEB(val, reg) (outb(val, dev->base_addr + ((reg<0x8)?reg:reg-0x8))) -#define SIFREADW(reg) (inw(dev->base_addr + ((reg<0x8)?reg:reg-0x8))) -#define SIFWRITEW(val, reg) (outw(val, dev->base_addr + ((reg<0x8)?reg:reg-0x8))) - -/* - * Read a byte-length value from the register. - */ -static unsigned short madgemc_sifreadb(struct net_device *dev, unsigned short reg) -{ - unsigned short ret; - if (reg<0x8) - ret = SIFREADB(reg); - else { - madgemc_setregpage(dev, 1); - ret = SIFREADB(reg); - madgemc_setregpage(dev, 0); - } - return ret; -} - -/* - * Write a byte-length value to a register. - */ -static void madgemc_sifwriteb(struct net_device *dev, unsigned short val, unsigned short reg) -{ - if (reg<0x8) - SIFWRITEB(val, reg); - else { - madgemc_setregpage(dev, 1); - SIFWRITEB(val, reg); - madgemc_setregpage(dev, 0); - } -} - -/* - * Read a word-length value from a register - */ -static unsigned short madgemc_sifreadw(struct net_device *dev, unsigned short reg) -{ - unsigned short ret; - if (reg<0x8) - ret = SIFREADW(reg); - else { - madgemc_setregpage(dev, 1); - ret = SIFREADW(reg); - madgemc_setregpage(dev, 0); - } - return ret; -} - -/* - * Write a word-length value to a register. - */ -static void madgemc_sifwritew(struct net_device *dev, unsigned short val, unsigned short reg) -{ - if (reg<0x8) - SIFWRITEW(val, reg); - else { - madgemc_setregpage(dev, 1); - SIFWRITEW(val, reg); - madgemc_setregpage(dev, 0); - } -} - -static struct net_device_ops madgemc_netdev_ops __read_mostly; - -static int __devinit madgemc_probe(struct device *device) -{ - static int versionprinted; - struct net_device *dev; - struct net_local *tp; - struct card_info *card; - struct mca_device *mdev = to_mca_device(device); - int ret = 0; - - if (versionprinted++ == 0) - printk("%s", version); - - if(mca_device_claimed(mdev)) - return -EBUSY; - mca_device_set_claim(mdev, 1); - - dev = alloc_trdev(sizeof(struct net_local)); - if (!dev) { - printk("madgemc: unable to allocate dev space\n"); - mca_device_set_claim(mdev, 0); - ret = -ENOMEM; - goto getout; - } - - dev->netdev_ops = &madgemc_netdev_ops; - - card = kmalloc(sizeof(struct card_info), GFP_KERNEL); - if (card==NULL) { - ret = -ENOMEM; - goto getout1; - } - - /* - * Parse configuration information. This all comes - * directly from the publicly available @002d.ADF. - * Get it from Madge or your local ADF library. - */ - - /* - * Base address - */ - dev->base_addr = 0x0a20 + - ((mdev->pos[2] & MC16_POS2_ADDR2)?0x0400:0) + - ((mdev->pos[0] & MC16_POS0_ADDR1)?0x1000:0) + - ((mdev->pos[3] & MC16_POS3_ADDR3)?0x2000:0); - - /* - * Interrupt line - */ - switch(mdev->pos[0] >> 6) { /* upper two bits */ - case 0x1: dev->irq = 3; break; - case 0x2: dev->irq = 9; break; /* IRQ 2 = IRQ 9 */ - case 0x3: dev->irq = 10; break; - default: dev->irq = 0; break; - } - - if (dev->irq == 0) { - printk("%s: invalid IRQ\n", dev->name); - ret = -EBUSY; - goto getout2; - } - - if (!request_region(dev->base_addr, MADGEMC_IO_EXTENT, - "madgemc")) { - printk(KERN_INFO "madgemc: unable to setup Smart MC in slot %d because of I/O base conflict at 0x%04lx\n", mdev->slot, dev->base_addr); - dev->base_addr += MADGEMC_SIF_OFFSET; - ret = -EBUSY; - goto getout2; - } - dev->base_addr += MADGEMC_SIF_OFFSET; - - /* - * Arbitration Level - */ - card->arblevel = ((mdev->pos[0] >> 1) & 0x7) + 8; - - /* - * Burst mode and Fairness - */ - card->burstmode = ((mdev->pos[2] >> 6) & 0x3); - card->fairness = ((mdev->pos[2] >> 4) & 0x1); - - /* - * Ring Speed - */ - if ((mdev->pos[1] >> 2)&0x1) - card->ringspeed = 2; /* not selected */ - else if ((mdev->pos[2] >> 5) & 0x1) - card->ringspeed = 1; /* 16Mb */ - else - card->ringspeed = 0; /* 4Mb */ - - /* - * Cable type - */ - if ((mdev->pos[1] >> 6)&0x1) - card->cabletype = 1; /* STP/DB9 */ - else - card->cabletype = 0; /* UTP/RJ-45 */ - - - /* - * ROM Info. This requires us to actually twiddle - * bits on the card, so we must ensure above that - * the base address is free of conflict (request_region above). - */ - madgemc_read_rom(dev, card); - - if (card->manid != 0x4d) { /* something went wrong */ - printk(KERN_INFO "%s: Madge MC ROM read failed (unknown manufacturer ID %02x)\n", dev->name, card->manid); - goto getout3; - } - - if ((card->cardtype != 0x08) && (card->cardtype != 0x0d)) { - printk(KERN_INFO "%s: Madge MC ROM read failed (unknown card ID %02x)\n", dev->name, card->cardtype); - ret = -EIO; - goto getout3; - } - - /* All cards except Rev 0 and 1 MC16's have 256kb of RAM */ - if ((card->cardtype == 0x08) && (card->cardrev <= 0x01)) - card->ramsize = 128; - else - card->ramsize = 256; - - printk("%s: %s Rev %d at 0x%04lx IRQ %d\n", - dev->name, - (card->cardtype == 0x08)?MADGEMC16_CARDNAME: - MADGEMC32_CARDNAME, card->cardrev, - dev->base_addr, dev->irq); - - if (card->cardtype == 0x0d) - printk("%s: Warning: MC32 support is experimental and highly untested\n", dev->name); - - if (card->ringspeed==2) { /* Unknown */ - printk("%s: Warning: Ring speed not set in POS -- Please run the reference disk and set it!\n", dev->name); - card->ringspeed = 1; /* default to 16mb */ - } - - printk("%s: RAM Size: %dKB\n", dev->name, card->ramsize); - - printk("%s: Ring Speed: %dMb/sec on %s\n", dev->name, - (card->ringspeed)?16:4, - card->cabletype?"STP/DB9":"UTP/RJ-45"); - printk("%s: Arbitration Level: %d\n", dev->name, - card->arblevel); - - printk("%s: Burst Mode: ", dev->name); - switch(card->burstmode) { - case 0: printk("Cycle steal"); break; - case 1: printk("Limited burst"); break; - case 2: printk("Delayed release"); break; - case 3: printk("Immediate release"); break; - } - printk(" (%s)\n", (card->fairness)?"Unfair":"Fair"); - - - /* - * Enable SIF before we assign the interrupt handler, - * just in case we get spurious interrupts that need - * handling. - */ - outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */ - madgemc_setsifsel(dev, 1); - if (request_irq(dev->irq, madgemc_interrupt, IRQF_SHARED, - "madgemc", dev)) { - ret = -EBUSY; - goto getout3; - } - - madgemc_chipset_init(dev); /* enables interrupts! */ - madgemc_setcabletype(dev, card->cabletype); - - /* Setup MCA structures */ - mca_device_set_name(mdev, (card->cardtype == 0x08)?MADGEMC16_CARDNAME:MADGEMC32_CARDNAME); - mca_set_adapter_procfn(mdev->slot, madgemc_mcaproc, dev); - - printk("%s: Ring Station Address: %pM\n", - dev->name, dev->dev_addr); - - if (tmsdev_init(dev, device)) { - printk("%s: unable to get memory for dev->priv.\n", - dev->name); - ret = -ENOMEM; - goto getout4; - } - tp = netdev_priv(dev); - - /* - * The MC16 is physically a 32bit card. However, Madge - * insists on calling it 16bit, so I'll assume here that - * they know what they're talking about. Cut off DMA - * at 16mb. - */ - tp->setnselout = madgemc_setnselout_pins; - tp->sifwriteb = madgemc_sifwriteb; - tp->sifreadb = madgemc_sifreadb; - tp->sifwritew = madgemc_sifwritew; - tp->sifreadw = madgemc_sifreadw; - tp->DataRate = (card->ringspeed)?SPEED_16:SPEED_4; - - memcpy(tp->ProductID, "Madge MCA 16/4 ", PROD_ID_SIZE + 1); - - tp->tmspriv = card; - dev_set_drvdata(device, dev); - - if (register_netdev(dev) == 0) - return 0; - - dev_set_drvdata(device, NULL); - ret = -ENOMEM; -getout4: - free_irq(dev->irq, dev); -getout3: - release_region(dev->base_addr-MADGEMC_SIF_OFFSET, - MADGEMC_IO_EXTENT); -getout2: - kfree(card); -getout1: - free_netdev(dev); -getout: - mca_device_set_claim(mdev, 0); - return ret; -} - -/* - * Handle interrupts generated by the card - * - * The MicroChannel Madge cards need slightly more handling - * after an interrupt than other TMS380 cards do. - * - * First we must make sure it was this card that generated the - * interrupt (since interrupt sharing is allowed). Then, - * because we're using level-triggered interrupts (as is - * standard on MCA), we must toggle the interrupt line - * on the card in order to claim and acknowledge the interrupt. - * Once that is done, the interrupt should be handlable in - * the normal tms380tr_interrupt() routine. - * - * There's two ways we can check to see if the interrupt is ours, - * both with their own disadvantages... - * - * 1) Read in the SIFSTS register from the TMS controller. This - * is guaranteed to be accurate, however, there's a fairly - * large performance penalty for doing so: the Madge chips - * must request the register from the Eagle, the Eagle must - * read them from its internal bus, and then take the route - * back out again, for a 16bit read. - * - * 2) Use the MC_CONTROL_REG0_SINTR bit from the Madge ASICs. - * The major disadvantage here is that the accuracy of the - * bit is in question. However, it cuts out the extra read - * cycles it takes to read the Eagle's SIF, as its only an - * 8bit read, and theoretically the Madge bit is directly - * connected to the interrupt latch coming out of the Eagle - * hardware (that statement is not verified). - * - * I can't determine which of these methods has the best win. For now, - * we make a compromise. Use the Madge way for the first interrupt, - * which should be the fast-path, and then once we hit the first - * interrupt, keep on trying using the SIF method until we've - * exhausted all contiguous interrupts. - * - */ -static irqreturn_t madgemc_interrupt(int irq, void *dev_id) -{ - int pending,reg1; - struct net_device *dev; - - if (!dev_id) { - printk("madgemc_interrupt: was not passed a dev_id!\n"); - return IRQ_NONE; - } - - dev = dev_id; - - /* Make sure its really us. -- the Madge way */ - pending = inb(dev->base_addr + MC_CONTROL_REG0); - if (!(pending & MC_CONTROL_REG0_SINTR)) - return IRQ_NONE; /* not our interrupt */ - - /* - * Since we're level-triggered, we may miss the rising edge - * of the next interrupt while we're off handling this one, - * so keep checking until the SIF verifies that it has nothing - * left for us to do. - */ - pending = STS_SYSTEM_IRQ; - do { - if (pending & STS_SYSTEM_IRQ) { - - /* Toggle the interrupt to reset the latch on card */ - reg1 = inb(dev->base_addr + MC_CONTROL_REG1); - outb(reg1 ^ MC_CONTROL_REG1_SINTEN, - dev->base_addr + MC_CONTROL_REG1); - outb(reg1, dev->base_addr + MC_CONTROL_REG1); - - /* Continue handling as normal */ - tms380tr_interrupt(irq, dev_id); - - pending = SIFREADW(SIFSTS); /* restart - the SIF way */ - - } else - return IRQ_HANDLED; - } while (1); - - return IRQ_HANDLED; /* not reachable */ -} - -/* - * Set the card to the preferred ring speed. - * - * Unlike newer cards, the MC16/32 have their speed selection - * circuit connected to the Madge ASICs and not to the TMS380 - * NSELOUT pins. Set the ASIC bits correctly here, and return - * zero to leave the TMS NSELOUT bits unaffected. - * - */ -static unsigned short madgemc_setnselout_pins(struct net_device *dev) -{ - unsigned char reg1; - struct net_local *tp = netdev_priv(dev); - - reg1 = inb(dev->base_addr + MC_CONTROL_REG1); - - if(tp->DataRate == SPEED_16) - reg1 |= MC_CONTROL_REG1_SPEED_SEL; /* add for 16mb */ - else if (reg1 & MC_CONTROL_REG1_SPEED_SEL) - reg1 ^= MC_CONTROL_REG1_SPEED_SEL; /* remove for 4mb */ - outb(reg1, dev->base_addr + MC_CONTROL_REG1); - - return 0; /* no change */ -} - -/* - * Set the register page. This equates to the SRSX line - * on the TMS380Cx6. - * - * Register selection is normally done via three contiguous - * bits. However, some boards (such as the MC16/32) use only - * two bits, plus a separate bit in the glue chip. This - * sets the SRSX bit (the top bit). See page 4-17 in the - * Yellow Book for which registers are affected. - * - */ -static void madgemc_setregpage(struct net_device *dev, int page) -{ - static int reg1; - - reg1 = inb(dev->base_addr + MC_CONTROL_REG1); - if ((page == 0) && (reg1 & MC_CONTROL_REG1_SRSX)) { - outb(reg1 ^ MC_CONTROL_REG1_SRSX, - dev->base_addr + MC_CONTROL_REG1); - } - else if (page == 1) { - outb(reg1 | MC_CONTROL_REG1_SRSX, - dev->base_addr + MC_CONTROL_REG1); - } - reg1 = inb(dev->base_addr + MC_CONTROL_REG1); -} - -/* - * The SIF registers are not mapped into register space by default - * Set this to 1 to map them, 0 to map the BIA ROM. - * - */ -static void madgemc_setsifsel(struct net_device *dev, int val) -{ - unsigned int reg0; - - reg0 = inb(dev->base_addr + MC_CONTROL_REG0); - if ((val == 0) && (reg0 & MC_CONTROL_REG0_SIFSEL)) { - outb(reg0 ^ MC_CONTROL_REG0_SIFSEL, - dev->base_addr + MC_CONTROL_REG0); - } else if (val == 1) { - outb(reg0 | MC_CONTROL_REG0_SIFSEL, - dev->base_addr + MC_CONTROL_REG0); - } - reg0 = inb(dev->base_addr + MC_CONTROL_REG0); -} - -/* - * Enable SIF interrupts - * - * This does not enable interrupts in the SIF, but rather - * enables SIF interrupts to be passed onto the host. - * - */ -static void madgemc_setint(struct net_device *dev, int val) -{ - unsigned int reg1; - - reg1 = inb(dev->base_addr + MC_CONTROL_REG1); - if ((val == 0) && (reg1 & MC_CONTROL_REG1_SINTEN)) { - outb(reg1 ^ MC_CONTROL_REG1_SINTEN, - dev->base_addr + MC_CONTROL_REG1); - } else if (val == 1) { - outb(reg1 | MC_CONTROL_REG1_SINTEN, - dev->base_addr + MC_CONTROL_REG1); - } -} - -/* - * Cable type is set via control register 7. Bit zero high - * for UTP, low for STP. - */ -static void madgemc_setcabletype(struct net_device *dev, int type) -{ - outb((type==0)?MC_CONTROL_REG7_CABLEUTP:MC_CONTROL_REG7_CABLESTP, - dev->base_addr + MC_CONTROL_REG7); -} - -/* - * Enable the functions of the Madge chipset needed for - * full working order. - */ -static int madgemc_chipset_init(struct net_device *dev) -{ - outb(0, dev->base_addr + MC_CONTROL_REG1); /* pull SRESET low */ - tms380tr_wait(100); /* wait for card to reset */ - - /* bring back into normal operating mode */ - outb(MC_CONTROL_REG1_NSRESET, dev->base_addr + MC_CONTROL_REG1); - - /* map SIF registers */ - madgemc_setsifsel(dev, 1); - - /* enable SIF interrupts */ - madgemc_setint(dev, 1); - - return 0; -} - -/* - * Disable the board, and put back into power-up state. - */ -static void madgemc_chipset_close(struct net_device *dev) -{ - /* disable interrupts */ - madgemc_setint(dev, 0); - /* unmap SIF registers */ - madgemc_setsifsel(dev, 0); -} - -/* - * Read the card type (MC16 or MC32) from the card. - * - * The configuration registers are stored in two separate - * pages. Pages are flipped by clearing bit 3 of CONTROL_REG0 (PAGE) - * for page zero, or setting bit 3 for page one. - * - * Page zero contains the following data: - * Byte 0: Manufacturer ID (0x4D -- ASCII "M") - * Byte 1: Card type: - * 0x08 for MC16 - * 0x0D for MC32 - * Byte 2: Card revision - * Byte 3: Mirror of POS config register 0 - * Byte 4: Mirror of POS 1 - * Byte 5: Mirror of POS 2 - * - * Page one contains the following data: - * Byte 0: Unused - * Byte 1-6: BIA, MSB to LSB. - * - * Note that to read the BIA, we must unmap the SIF registers - * by clearing bit 2 of CONTROL_REG0 (SIFSEL), as the data - * will reside in the same logical location. For this reason, - * _never_ read the BIA while the Eagle processor is running! - * The SIF will be completely inaccessible until the BIA operation - * is complete. - * - */ -static void madgemc_read_rom(struct net_device *dev, struct card_info *card) -{ - unsigned long ioaddr; - unsigned char reg0, reg1, tmpreg0, i; - - ioaddr = dev->base_addr; - - reg0 = inb(ioaddr + MC_CONTROL_REG0); - reg1 = inb(ioaddr + MC_CONTROL_REG1); - - /* Switch to page zero and unmap SIF */ - tmpreg0 = reg0 & ~(MC_CONTROL_REG0_PAGE + MC_CONTROL_REG0_SIFSEL); - outb(tmpreg0, ioaddr + MC_CONTROL_REG0); - - card->manid = inb(ioaddr + MC_ROM_MANUFACTURERID); - card->cardtype = inb(ioaddr + MC_ROM_ADAPTERID); - card->cardrev = inb(ioaddr + MC_ROM_REVISION); - - /* Switch to rom page one */ - outb(tmpreg0 | MC_CONTROL_REG0_PAGE, ioaddr + MC_CONTROL_REG0); - - /* Read BIA */ - dev->addr_len = 6; - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + MC_ROM_BIA_START + i); - - /* Restore original register values */ - outb(reg0, ioaddr + MC_CONTROL_REG0); - outb(reg1, ioaddr + MC_CONTROL_REG1); -} - -static int madgemc_open(struct net_device *dev) -{ - /* - * Go ahead and reinitialize the chipset again, just to - * make sure we didn't get left in a bad state. - */ - madgemc_chipset_init(dev); - tms380tr_open(dev); - return 0; -} - -static int madgemc_close(struct net_device *dev) -{ - tms380tr_close(dev); - madgemc_chipset_close(dev); - return 0; -} - -/* - * Give some details available from /proc/mca/slotX - */ -static int madgemc_mcaproc(char *buf, int slot, void *d) -{ - struct net_device *dev = (struct net_device *)d; - struct net_local *tp = netdev_priv(dev); - struct card_info *curcard = tp->tmspriv; - int len = 0; - - len += sprintf(buf+len, "-------\n"); - if (curcard) { - len += sprintf(buf+len, "Card Revision: %d\n", curcard->cardrev); - len += sprintf(buf+len, "RAM Size: %dkb\n", curcard->ramsize); - len += sprintf(buf+len, "Cable type: %s\n", (curcard->cabletype)?"STP/DB9":"UTP/RJ-45"); - len += sprintf(buf+len, "Configured ring speed: %dMb/sec\n", (curcard->ringspeed)?16:4); - len += sprintf(buf+len, "Running ring speed: %dMb/sec\n", (tp->DataRate==SPEED_16)?16:4); - len += sprintf(buf+len, "Device: %s\n", dev->name); - len += sprintf(buf+len, "IO Port: 0x%04lx\n", dev->base_addr); - len += sprintf(buf+len, "IRQ: %d\n", dev->irq); - len += sprintf(buf+len, "Arbitration Level: %d\n", curcard->arblevel); - len += sprintf(buf+len, "Burst Mode: "); - switch(curcard->burstmode) { - case 0: len += sprintf(buf+len, "Cycle steal"); break; - case 1: len += sprintf(buf+len, "Limited burst"); break; - case 2: len += sprintf(buf+len, "Delayed release"); break; - case 3: len += sprintf(buf+len, "Immediate release"); break; - } - len += sprintf(buf+len, " (%s)\n", (curcard->fairness)?"Unfair":"Fair"); - - len += sprintf(buf+len, "Ring Station Address: %pM\n", - dev->dev_addr); - } else - len += sprintf(buf+len, "Card not configured\n"); - - return len; -} - -static int __devexit madgemc_remove(struct device *device) -{ - struct net_device *dev = dev_get_drvdata(device); - struct net_local *tp; - struct card_info *card; - - BUG_ON(!dev); - - tp = netdev_priv(dev); - card = tp->tmspriv; - kfree(card); - tp->tmspriv = NULL; - - unregister_netdev(dev); - release_region(dev->base_addr-MADGEMC_SIF_OFFSET, MADGEMC_IO_EXTENT); - free_irq(dev->irq, dev); - tmsdev_term(dev); - free_netdev(dev); - dev_set_drvdata(device, NULL); - - return 0; -} - -static short madgemc_adapter_ids[] __initdata = { - 0x002d, - 0x0000 -}; - -static struct mca_driver madgemc_driver = { - .id_table = madgemc_adapter_ids, - .driver = { - .name = "madgemc", - .bus = &mca_bus_type, - .probe = madgemc_probe, - .remove = __devexit_p(madgemc_remove), - }, -}; - -static int __init madgemc_init (void) -{ - madgemc_netdev_ops = tms380tr_netdev_ops; - madgemc_netdev_ops.ndo_open = madgemc_open; - madgemc_netdev_ops.ndo_stop = madgemc_close; - - return mca_register_driver (&madgemc_driver); -} - -static void __exit madgemc_exit (void) -{ - mca_unregister_driver (&madgemc_driver); -} - -module_init(madgemc_init); -module_exit(madgemc_exit); - -MODULE_LICENSE("GPL"); - |