diff options
Diffstat (limited to 'drivers/net/usb/asix.h')
| -rw-r--r-- | drivers/net/usb/asix.h | 1680 |
1 files changed, 1680 insertions, 0 deletions
diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h new file mode 100644 index 000000000000..6564c32d3af0 --- /dev/null +++ b/drivers/net/usb/asix.h @@ -0,0 +1,1680 @@ +/* + * ASIX AX8817X based USB 2.0 Ethernet Devices + * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com> + * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> + * Copyright (C) 2006 James Painter <jamie.painter@iname.com> + * Copyright (c) 2002-2003 TiVo Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +// #define DEBUG // error path messages, extra info +// #define VERBOSE // more; success messages + +#include <linux/module.h> +#include <linux/kmod.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> +#include <linux/usb/usbnet.h> +#include <linux/slab.h> +#include <linux/if_vlan.h> + +#define DRIVER_VERSION "22-Dec-2011" +#define DRIVER_NAME "asix" + +/* ASIX AX8817X based USB 2.0 Ethernet Devices */ + +#define AX_CMD_SET_SW_MII 0x06 +#define AX_CMD_READ_MII_REG 0x07 +#define AX_CMD_WRITE_MII_REG 0x08 +#define AX_CMD_SET_HW_MII 0x0a +#define AX_CMD_READ_EEPROM 0x0b +#define AX_CMD_WRITE_EEPROM 0x0c +#define AX_CMD_WRITE_ENABLE 0x0d +#define AX_CMD_WRITE_DISABLE 0x0e +#define AX_CMD_READ_RX_CTL 0x0f +#define AX_CMD_WRITE_RX_CTL 0x10 +#define AX_CMD_READ_IPG012 0x11 +#define AX_CMD_WRITE_IPG0 0x12 +#define AX_CMD_WRITE_IPG1 0x13 +#define AX_CMD_READ_NODE_ID 0x13 +#define AX_CMD_WRITE_NODE_ID 0x14 +#define AX_CMD_WRITE_IPG2 0x14 +#define AX_CMD_WRITE_MULTI_FILTER 0x16 +#define AX88172_CMD_READ_NODE_ID 0x17 +#define AX_CMD_READ_PHY_ID 0x19 +#define AX_CMD_READ_MEDIUM_STATUS 0x1a +#define AX_CMD_WRITE_MEDIUM_MODE 0x1b +#define AX_CMD_READ_MONITOR_MODE 0x1c +#define AX_CMD_WRITE_MONITOR_MODE 0x1d +#define AX_CMD_READ_GPIOS 0x1e +#define AX_CMD_WRITE_GPIOS 0x1f +#define AX_CMD_SW_RESET 0x20 +#define AX_CMD_SW_PHY_STATUS 0x21 +#define AX_CMD_SW_PHY_SELECT 0x22 + +#define AX_MONITOR_MODE 0x01 +#define AX_MONITOR_LINK 0x02 +#define AX_MONITOR_MAGIC 0x04 +#define AX_MONITOR_HSFS 0x10 + +/* AX88172 Medium Status Register values */ +#define AX88172_MEDIUM_FD 0x02 +#define AX88172_MEDIUM_TX 0x04 +#define AX88172_MEDIUM_FC 0x10 +#define AX88172_MEDIUM_DEFAULT \ + ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC ) + +#define AX_MCAST_FILTER_SIZE 8 +#define AX_MAX_MCAST 64 + +#define AX_SWRESET_CLEAR 0x00 +#define AX_SWRESET_RR 0x01 +#define AX_SWRESET_RT 0x02 +#define AX_SWRESET_PRTE 0x04 +#define AX_SWRESET_PRL 0x08 +#define AX_SWRESET_BZ 0x10 +#define AX_SWRESET_IPRL 0x20 +#define AX_SWRESET_IPPD 0x40 + +#define AX88772_IPG0_DEFAULT 0x15 +#define AX88772_IPG1_DEFAULT 0x0c +#define AX88772_IPG2_DEFAULT 0x12 + +/* AX88772 & AX88178 Medium Mode Register */ +#define AX_MEDIUM_PF 0x0080 +#define AX_MEDIUM_JFE 0x0040 +#define AX_MEDIUM_TFC 0x0020 +#define AX_MEDIUM_RFC 0x0010 +#define AX_MEDIUM_ENCK 0x0008 +#define AX_MEDIUM_AC 0x0004 +#define AX_MEDIUM_FD 0x0002 +#define AX_MEDIUM_GM 0x0001 +#define AX_MEDIUM_SM 0x1000 +#define AX_MEDIUM_SBP 0x0800 +#define AX_MEDIUM_PS 0x0200 +#define AX_MEDIUM_RE 0x0100 + +#define AX88178_MEDIUM_DEFAULT \ + (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \ + AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \ + AX_MEDIUM_RE) + +#define AX88772_MEDIUM_DEFAULT \ + (AX_MEDIUM_FD | AX_MEDIUM_RFC | \ + AX_MEDIUM_TFC | AX_MEDIUM_PS | \ + AX_MEDIUM_AC | AX_MEDIUM_RE) + +/* AX88772 & AX88178 RX_CTL values */ +#define AX_RX_CTL_SO 0x0080 +#define AX_RX_CTL_AP 0x0020 +#define AX_RX_CTL_AM 0x0010 +#define AX_RX_CTL_AB 0x0008 +#define AX_RX_CTL_SEP 0x0004 +#define AX_RX_CTL_AMALL 0x0002 +#define AX_RX_CTL_PRO 0x0001 +#define AX_RX_CTL_MFB_2048 0x0000 +#define AX_RX_CTL_MFB_4096 0x0100 +#define AX_RX_CTL_MFB_8192 0x0200 +#define AX_RX_CTL_MFB_16384 0x0300 + +#define AX_DEFAULT_RX_CTL (AX_RX_CTL_SO | AX_RX_CTL_AB) + +/* GPIO 0 .. 2 toggles */ +#define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */ +#define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */ +#define AX_GPIO_GPO1EN 0x04 /* GPIO1 Output enable */ +#define AX_GPIO_GPO_1 0x08 /* GPIO1 Output value */ +#define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */ +#define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */ +#define AX_GPIO_RESERVED 0x40 /* Reserved */ +#define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */ + +#define AX_EEPROM_MAGIC 0xdeadbeef +#define AX88172_EEPROM_LEN 0x40 +#define AX88772_EEPROM_LEN 0xff + +#define PHY_MODE_MARVELL 0x0000 +#define MII_MARVELL_LED_CTRL 0x0018 +#define MII_MARVELL_STATUS 0x001b +#define MII_MARVELL_CTRL 0x0014 + +#define MARVELL_LED_MANUAL 0x0019 + +#define MARVELL_STATUS_HWCFG 0x0004 + +#define MARVELL_CTRL_TXDELAY 0x0002 +#define MARVELL_CTRL_RXDELAY 0x0080 + +#define PHY_MODE_RTL8211CL 0x000C + +/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ +struct asix_data { + u8 multi_filter[AX_MCAST_FILTER_SIZE]; + u8 mac_addr[ETH_ALEN]; + u8 phymode; + u8 ledmode; + u8 eeprom_len; +}; + +struct ax88172_int_data { + __le16 res1; + u8 link; + __le16 res2; + u8 status; + __le16 res3; +} __packed; + +static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + void *buf; + int err = -ENOMEM; + + netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + goto out; + + err = usb_control_msg( + dev->udev, + usb_rcvctrlpipe(dev->udev, 0), + cmd, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + buf, + size, + USB_CTRL_GET_TIMEOUT); + if (err == size) + memcpy(data, buf, size); + else if (err >= 0) + err = -EINVAL; + kfree(buf); + +out: + return err; +} + +static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + void *buf = NULL; + int err = -ENOMEM; + + netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + + if (data) { + buf = kmemdup(data, size, GFP_KERNEL); + if (!buf) + goto out; + } + + err = usb_control_msg( + dev->udev, + usb_sndctrlpipe(dev->udev, 0), + cmd, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + buf, + size, + USB_CTRL_SET_TIMEOUT); + kfree(buf); + +out: + return err; +} + +static void asix_async_cmd_callback(struct urb *urb) +{ + struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; + int status = urb->status; + + if (status < 0) + printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d", + status); + + kfree(req); + usb_free_urb(urb); +} + +static void +asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + struct usb_ctrlrequest *req; + int status; + struct urb *urb; + + netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n"); + return; + } + + req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); + if (!req) { + netdev_err(dev->net, "Failed to allocate memory for control request\n"); + usb_free_urb(urb); + return; + } + + req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; + req->bRequest = cmd; + req->wValue = cpu_to_le16(value); + req->wIndex = cpu_to_le16(index); + req->wLength = cpu_to_le16(size); + + usb_fill_control_urb(urb, dev->udev, + usb_sndctrlpipe(dev->udev, 0), + (void *)req, data, size, + asix_async_cmd_callback, req); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status < 0) { + netdev_err(dev->net, "Error submitting the control message: status=%d\n", + status); + kfree(req); + usb_free_urb(urb); + } +} + +static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + int offset = 0; + + while (offset + sizeof(u32) < skb->len) { + struct sk_buff *ax_skb; + u16 size; + u32 header = get_unaligned_le32(skb->data + offset); + + offset += sizeof(u32); + + /* get the packet length */ + size = (u16) (header & 0x7ff); + if (size != ((~header >> 16) & 0x07ff)) { + netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n"); + return 0; + } + + if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) || + (size + offset > skb->len)) { + netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n", + size); + return 0; + } + ax_skb = netdev_alloc_skb_ip_align(dev->net, size); + if (!ax_skb) + return 0; + + skb_put(ax_skb, size); + memcpy(ax_skb->data, skb->data + offset, size); + usbnet_skb_return(dev, ax_skb); + + offset += (size + 1) & 0xfffe; + } + + if (skb->len != offset) { + netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n", + skb->len); + return 0; + } + return 1; +} + +static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + int padlen; + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + u32 packet_len; + u32 padbytes = 0xffff0000; + + padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; + + /* We need to push 4 bytes in front of frame (packet_len) + * and maybe add 4 bytes after the end (if padlen is 4) + * + * Avoid skb_copy_expand() expensive call, using following rules : + * - We are allowed to push 4 bytes in headroom if skb_header_cloned() + * is false (and if we have 4 bytes of headroom) + * - We are allowed to put 4 bytes at tail if skb_cloned() + * is false (and if we have 4 bytes of tailroom) + * + * TCP packets for example are cloned, but skb_header_release() + * was called in tcp stack, allowing us to use headroom for our needs. + */ + if (!skb_header_cloned(skb) && + !(padlen && skb_cloned(skb)) && + headroom + tailroom >= 4 + padlen) { + /* following should not happen, but better be safe */ + if (headroom < 4 || + tailroom < padlen) { + skb->data = memmove(skb->head + 4, skb->data, skb->len); + skb_set_tail_pointer(skb, skb->len); + } + } else { + struct sk_buff *skb2; + + skb2 = skb_copy_expand(skb, 4, padlen, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + + packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len; + skb_push(skb, 4); + cpu_to_le32s(&packet_len); + skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); + + if (padlen) { + cpu_to_le32s(&padbytes); + memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); + skb_put(skb, sizeof(padbytes)); + } + return skb; +} + +static void asix_status(struct usbnet *dev, struct urb *urb) +{ + struct ax88172_int_data *event; + int link; + + if (urb->actual_length < 8) + return; + + event = urb->transfer_buffer; + link = event->link & 0x01; + if (netif_carrier_ok(dev->net) != link) { + if (link) { + netif_carrier_on(dev->net); + usbnet_defer_kevent (dev, EVENT_LINK_RESET ); + } else + netif_carrier_off(dev->net); + netdev_dbg(dev->net, "Link Status is: %d\n", link); + } +} + +static inline int asix_set_sw_mii(struct usbnet *dev) +{ + int ret; + ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable software MII access\n"); + return ret; +} + +static inline int asix_set_hw_mii(struct usbnet *dev) +{ + int ret; + ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable hardware MII access\n"); + return ret; +} + +static inline int asix_get_phy_addr(struct usbnet *dev) +{ + u8 buf[2]; + int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf); + + netdev_dbg(dev->net, "asix_get_phy_addr()\n"); + + if (ret < 0) { + netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret); + goto out; + } + netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n", + *((__le16 *)buf)); + ret = buf[1]; + +out: + return ret; +} + +static int asix_sw_reset(struct usbnet *dev, u8 flags) +{ + int ret; + + ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to send software reset: %02x\n", ret); + + return ret; +} + +static u16 asix_read_rx_ctl(struct usbnet *dev) +{ + __le16 v; + int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v); + + if (ret < 0) { + netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret); + goto out; + } + ret = le16_to_cpu(v); +out: + return ret; +} + +static int asix_write_rx_ctl(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode); + ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n", + mode, ret); + + return ret; +} + +static u16 asix_read_medium_status(struct usbnet *dev) +{ + __le16 v; + int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v); + + if (ret < 0) { + netdev_err(dev->net, "Error reading Medium Status register: %02x\n", + ret); + return ret; /* TODO: callers not checking for error ret */ + } + + return le16_to_cpu(v); + +} + +static int asix_write_medium_mode(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode); + ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n", + mode, ret); + + return ret; +} + +static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep) +{ + int ret; + + netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value); + ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n", + value, ret); + + if (sleep) + msleep(sleep); + + return ret; +} + +/* + * AX88772 & AX88178 have a 16-bit RX_CTL value + */ +static void asix_set_multicast(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + u16 rx_ctl = AX_DEFAULT_RX_CTL; + + if (net->flags & IFF_PROMISC) { + rx_ctl |= AX_RX_CTL_PRO; + } else if (net->flags & IFF_ALLMULTI || + netdev_mc_count(net) > AX_MAX_MCAST) { + rx_ctl |= AX_RX_CTL_AMALL; + } else if (netdev_mc_empty(net)) { + /* just broadcast and directed */ + } else { + /* We use the 20 byte dev->data + * for our 8 byte filter buffer + * to avoid allocating memory that + * is tricky to free later */ + struct netdev_hw_addr *ha; + u32 crc_bits; + + memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); + + /* Build the multicast hash filter. */ + netdev_for_each_mc_addr(ha, net) { + crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; + data->multi_filter[crc_bits >> 3] |= + 1 << (crc_bits & 7); + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, + AX_MCAST_FILTER_SIZE, data->multi_filter); + + rx_ctl |= AX_RX_CTL_AM; + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); +} + +static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) +{ + struct usbnet *dev = netdev_priv(netdev); + __le16 res; + + mutex_lock(&dev->phy_mutex); + asix_set_sw_mii(dev); + asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, + (__u16)loc, 2, &res); + asix_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); + + netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", + phy_id, loc, le16_to_cpu(res)); + + return le16_to_cpu(res); +} + +static void +asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) +{ + struct usbnet *dev = netdev_priv(netdev); + __le16 res = cpu_to_le16(val); + + netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", + phy_id, loc, val); + mutex_lock(&dev->phy_mutex); + asix_set_sw_mii(dev); + asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res); + asix_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); +} + +/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ +static u32 asix_get_phyid(struct usbnet *dev) +{ + int phy_reg; + u32 phy_id; + int i; + + /* Poll for the rare case the FW or phy isn't ready yet. */ + for (i = 0; i < 100; i++) { + phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); + if (phy_reg != 0 && phy_reg != 0xFFFF) + break; + mdelay(1); + } + + if (phy_reg <= 0 || phy_reg == 0xFFFF) + return 0; + + phy_id = (phy_reg & 0xffff) << 16; + + phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2); + if (phy_reg < 0) + return 0; + + phy_id |= (phy_reg & 0xffff); + + return phy_id; +} + +static void +asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt; + + if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { + wolinfo->supported = 0; + wolinfo->wolopts = 0; + return; + } + wolinfo->supported = WAKE_PHY | WAKE_MAGIC; + wolinfo->wolopts = 0; + if (opt & AX_MONITOR_LINK) + wolinfo->wolopts |= WAKE_PHY; + if (opt & AX_MONITOR_MAGIC) + wolinfo->wolopts |= WAKE_MAGIC; +} + +static int +asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt = 0; + + if (wolinfo->wolopts & WAKE_PHY) + opt |= AX_MONITOR_LINK; + if (wolinfo->wolopts & WAKE_MAGIC) + opt |= AX_MONITOR_MAGIC; + + if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, + opt, 0, 0, NULL) < 0) + return -EINVAL; + + return 0; +} + +static int asix_get_eeprom_len(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + + return data->eeprom_len; +} + +static int asix_get_eeprom(struct net_device *net, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct usbnet *dev = netdev_priv(net); + __le16 *ebuf = (__le16 *)data; + int i; + + /* Crude hack to ensure that we don't overwrite memory + * if an odd length is supplied + */ + if (eeprom->len % 2) + return -EINVAL; + + eeprom->magic = AX_EEPROM_MAGIC; + + /* ax8817x returns 2 bytes from eeprom on read */ + for (i=0; i < eeprom->len / 2; i++) { + if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, + eeprom->offset + i, 0, 2, &ebuf[i]) < 0) + return -EINVAL; + } + return 0; +} + +static void asix_get_drvinfo (struct net_device *net, + struct ethtool_drvinfo *info) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + + /* Inherit standard device info */ + usbnet_get_drvinfo(net, info); + strncpy (info->driver, DRIVER_NAME, sizeof info->driver); + strncpy (info->version, DRIVER_VERSION, sizeof info->version); + info->eedump_len = data->eeprom_len; +} + +static u32 asix_get_link(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + + return mii_link_ok(&dev->mii); +} + +static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd) +{ + struct usbnet *dev = netdev_priv(net); + + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); +} + +static int asix_set_mac_address(struct net_device *net, void *p) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + struct sockaddr *addr = p; + + if (netif_running(net)) + return -EBUSY; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); + + /* We use the 20 byte dev->data + * for our 6 byte mac buffer + * to avoid allocating memory that + * is tricky to free later */ + memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); + asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + + return 0; +} + +/* We need to override some ethtool_ops so we require our + own structure so we don't interfere with other usbnet + devices that may be connected at the same time. */ +static const struct ethtool_ops ax88172_ethtool_ops = { + .get_drvinfo = asix_get_drvinfo, + .get_link = asix_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = asix_get_wol, + .set_wol = asix_set_wol, + .get_eeprom_len = asix_get_eeprom_len, + .get_eeprom = asix_get_eeprom, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +static void ax88172_set_multicast(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct asix_data *data = (struct asix_data *)&dev->data; + u8 rx_ctl = 0x8c; + + if (net->flags & IFF_PROMISC) { + rx_ctl |= 0x01; + } else if (net->flags & IFF_ALLMULTI || + netdev_mc_count(net) > AX_MAX_MCAST) { + rx_ctl |= 0x02; + } else if (netdev_mc_empty(net)) { + /* just broadcast and directed */ + } else { + /* We use the 20 byte dev->data + * for our 8 byte filter buffer + * to avoid allocating memory that + * is tricky to free later */ + struct netdev_hw_addr *ha; + u32 crc_bits; + + memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); + + /* Build the multicast hash filter. */ + netdev_for_each_mc_addr(ha, net) { + crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; + data->multi_filter[crc_bits >> 3] |= + 1 << (crc_bits & 7); + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, + AX_MCAST_FILTER_SIZE, data->multi_filter); + + rx_ctl |= 0x10; + } + + asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); +} + +static int ax88172_link_reset(struct usbnet *dev) +{ + u8 mode; + struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = AX88172_MEDIUM_DEFAULT; + + if (ecmd.duplex != DUPLEX_FULL) + mode |= ~AX88172_MEDIUM_FD; + + netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", + ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); + + asix_write_medium_mode(dev, mode); + + return 0; +} + +static const struct net_device_ops ax88172_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = asix_ioctl, + .ndo_set_rx_mode = ax88172_set_multicast, +}; + +static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret = 0; + u8 buf[ETH_ALEN]; + int i; + unsigned long gpio_bits = dev->driver_info->data; + struct asix_data *data = (struct asix_data *)&dev->data; + + data->eeprom_len = AX88172_EEPROM_LEN; + + usbnet_get_endpoints(dev,intf); + + /* Toggle the GPIOs in a manufacturer/model specific way */ + for (i = 2; i >= 0; i--) { + ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, + (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL); + if (ret < 0) + goto out; + msleep(5); + } + + ret = asix_write_rx_ctl(dev, 0x80); + if (ret < 0) + goto out; + + /* Get the MAC address */ + ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + if (ret < 0) { + dbg("read AX_CMD_READ_NODE_ID failed: %d", ret); + goto out; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = asix_mdio_read; + dev->mii.mdio_write = asix_mdio_write; + dev->mii.phy_id_mask = 0x3f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = asix_get_phy_addr(dev); + + dev->net->netdev_ops = &ax88172_netdev_ops; + dev->net->ethtool_ops = &ax88172_ethtool_ops; + dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ + dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); + mii_nway_restart(&dev->mii); + + return 0; + +out: + return ret; +} + +static const struct ethtool_ops ax88772_ethtool_ops = { + .get_drvinfo = asix_get_drvinfo, + .get_link = asix_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = asix_get_wol, + .set_wol = asix_set_wol, + .get_eeprom_len = asix_get_eeprom_len, + .get_eeprom = asix_get_eeprom, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +static int ax88772_link_reset(struct usbnet *dev) +{ + u16 mode; + struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = AX88772_MEDIUM_DEFAULT; + + if (ethtool_cmd_speed(&ecmd) != SPEED_100) + mode &= ~AX_MEDIUM_PS; + + if (ecmd.duplex != DUPLEX_FULL) + mode &= ~AX_MEDIUM_FD; + + netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", + ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); + + asix_write_medium_mode(dev, mode); + + return 0; +} + +static int ax88772_reset(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + int ret, embd_phy; + u16 rx_ctl; + + ret = asix_write_gpio(dev, + AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5); + if (ret < 0) + goto out; + + embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); + + ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + dbg("Select PHY #1 failed: %d", ret); + goto out; + } + + ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); + if (ret < 0) + goto out; + + msleep(150); + + if (embd_phy) { + ret = asix_sw_reset(dev, AX_SWRESET_IPRL); + if (ret < 0) + goto out; + } else { + ret = asix_sw_reset(dev, AX_SWRESET_PRTE); + if (ret < 0) + goto out; + } + + msleep(150); + rx_ctl = asix_read_rx_ctl(dev); + dbg("RX_CTL is 0x%04x after software reset", rx_ctl); + ret = asix_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl); + + ret = asix_sw_reset(dev, AX_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA); + mii_nway_restart(&dev->mii); + + ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT); + if (ret < 0) + goto out; + + ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, + AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, + AX88772_IPG2_DEFAULT, 0, NULL); + if (ret < 0) { + dbg("Write IPG,IPG1,IPG2 failed: %d", ret); + goto out; + } + + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + goto out; + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + dbg("RX_CTL is 0x%04x after all initializations", rx_ctl); + + rx_ctl = asix_read_medium_status(dev); + dbg("Medium Status is 0x%04x after all initializations", rx_ctl); + + return 0; + +out: + return ret; + +} + +static const struct net_device_ops ax88772_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = asix_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = asix_ioctl, + .ndo_set_rx_mode = asix_set_multicast, +}; + +static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret, embd_phy; + struct asix_data *data = (struct asix_data *)&dev->data; + u8 buf[ETH_ALEN]; + u32 phyid; + + data->eeprom_len = AX88772_EEPROM_LEN; + + usbnet_get_endpoints(dev,intf); + + /* Get the MAC address */ + ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + if (ret < 0) { + dbg("Failed to read MAC address: %d", ret); + return ret; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = asix_mdio_read; + dev->mii.mdio_write = asix_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = asix_get_phy_addr(dev); + + dev->net->netdev_ops = &ax88772_netdev_ops; + dev->net->ethtool_ops = &ax88772_ethtool_ops; + dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ + dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ + + embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); + + /* Reset the PHY to normal operation mode */ + ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + dbg("Select PHY #1 failed: %d", ret); + return ret; + } + + ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); + if (ret < 0) + return ret; + + msleep(150); + + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); + if (ret < 0) + return ret; + + msleep(150); + + ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE); + + /* Read PHYID register *AFTER* the PHY was reset properly */ + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ + if (dev->driver_info->flags & FLAG_FRAMING_AX) { + /* hard_mtu is still the default - the device does not support + jumbo eth frames */ + dev->rx_urb_size = 2048; + } + + return 0; +} + +static const struct ethtool_ops ax88178_ethtool_ops = { + .get_drvinfo = asix_get_drvinfo, + .get_link = asix_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = asix_get_wol, + .set_wol = asix_set_wol, + .get_eeprom_len = asix_get_eeprom_len, + .get_eeprom = asix_get_eeprom, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +static int marvell_phy_init(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + u16 reg; + + netdev_dbg(dev->net, "marvell_phy_init()\n"); + + reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS); + netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg); + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL, + MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY); + + if (data->ledmode) { + reg = asix_mdio_read(dev->net, dev->mii.phy_id, + MII_MARVELL_LED_CTRL); + netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg); + + reg &= 0xf8ff; + reg |= (1 + 0x0100); + asix_mdio_write(dev->net, dev->mii.phy_id, + MII_MARVELL_LED_CTRL, reg); + + reg = asix_mdio_read(dev->net, dev->mii.phy_id, + MII_MARVELL_LED_CTRL); + netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg); + reg &= 0xfc0f; + } + + return 0; +} + +static int rtl8211cl_phy_init(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + + netdev_dbg(dev->net, "rtl8211cl_phy_init()\n"); + + asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005); + asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0); + asix_mdio_write (dev->net, dev->mii.phy_id, 0x01, + asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080); + asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0); + + if (data->ledmode == 12) { + asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002); + asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb); + asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0); + } + + return 0; +} + +static int marvell_led_status(struct usbnet *dev, u16 speed) +{ + u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL); + + netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg); + + /* Clear out the center LED bits - 0x03F0 */ + reg &= 0xfc0f; + + switch (speed) { + case SPEED_1000: + reg |= 0x03e0; + break; + case SPEED_100: + reg |= 0x03b0; + break; + default: + reg |= 0x02f0; + } + + netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg); + asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg); + + return 0; +} + +static int ax88178_reset(struct usbnet *dev) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + int ret; + __le16 eeprom; + u8 status; + int gpio0 = 0; + u32 phyid; + + asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status); + dbg("GPIO Status: 0x%04x", status); + + asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL); + asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom); + asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL); + + dbg("EEPROM index 0x17 is 0x%04x", eeprom); + + if (eeprom == cpu_to_le16(0xffff)) { + data->phymode = PHY_MODE_MARVELL; + data->ledmode = 0; + gpio0 = 1; + } else { + data->phymode = le16_to_cpu(eeprom) & 0x7F; + data->ledmode = le16_to_cpu(eeprom) >> 8; + gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1; + } + dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode); + + /* Power up external GigaPHY through AX88178 GPIO pin */ + asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40); + if ((le16_to_cpu(eeprom) >> 8) != 1) { + asix_write_gpio(dev, 0x003c, 30); + asix_write_gpio(dev, 0x001c, 300); + asix_write_gpio(dev, 0x003c, 30); + } else { + dbg("gpio phymode == 1 path"); + asix_write_gpio(dev, AX_GPIO_GPO1EN, 30); + asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30); + } + + /* Read PHYID register *AFTER* powering up PHY */ + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + + /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */ + asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL); + + asix_sw_reset(dev, 0); + msleep(150); + + asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); + msleep(150); + + asix_write_rx_ctl(dev, 0); + + if (data->phymode == PHY_MODE_MARVELL) { + marvell_phy_init(dev); + msleep(60); + } else if (data->phymode == PHY_MODE_RTL8211CL) + rtl8211cl_phy_init(dev); + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, + BMCR_RESET | BMCR_ANENABLE); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, + ADVERTISE_1000FULL); + + mii_nway_restart(&dev->mii); + + ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT); + if (ret < 0) + return ret; + + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + return ret; + + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); + if (ret < 0) + return ret; + + return 0; +} + +static int ax88178_link_reset(struct usbnet *dev) +{ + u16 mode; + struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; + struct asix_data *data = (struct asix_data *)&dev->data; + u32 speed; + + netdev_dbg(dev->net, "ax88178_link_reset()\n"); + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = AX88178_MEDIUM_DEFAULT; + speed = ethtool_cmd_speed(&ecmd); + + if (speed == SPEED_1000) + mode |= AX_MEDIUM_GM; + else if (speed == SPEED_100) + mode |= AX_MEDIUM_PS; + else + mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM); + + mode |= AX_MEDIUM_ENCK; + + if (ecmd.duplex == DUPLEX_FULL) + mode |= AX_MEDIUM_FD; + else + mode &= ~AX_MEDIUM_FD; + + netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", + speed, ecmd.duplex, mode); + + asix_write_medium_mode(dev, mode); + + if (data->phymode == PHY_MODE_MARVELL && data->ledmode) + marvell_led_status(dev, speed); + + return 0; +} + +static void ax88178_set_mfb(struct usbnet *dev) +{ + u16 mfb = AX_RX_CTL_MFB_16384; + u16 rxctl; + u16 medium; + int old_rx_urb_size = dev->rx_urb_size; + + if (dev->hard_mtu < 2048) { + dev->rx_urb_size = 2048; + mfb = AX_RX_CTL_MFB_2048; + } else if (dev->hard_mtu < 4096) { + dev->rx_urb_size = 4096; + mfb = AX_RX_CTL_MFB_4096; + } else if (dev->hard_mtu < 8192) { + dev->rx_urb_size = 8192; + mfb = AX_RX_CTL_MFB_8192; + } else if (dev->hard_mtu < 16384) { + dev->rx_urb_size = 16384; + mfb = AX_RX_CTL_MFB_16384; + } + + rxctl = asix_read_rx_ctl(dev); + asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb); + + medium = asix_read_medium_status(dev); + if (dev->net->mtu > 1500) + medium |= AX_MEDIUM_JFE; + else + medium &= ~AX_MEDIUM_JFE; + asix_write_medium_mode(dev, medium); + + if (dev->rx_urb_size > old_rx_urb_size) + usbnet_unlink_rx_urbs(dev); +} + +static int ax88178_change_mtu(struct net_device *net, int new_mtu) +{ + struct usbnet *dev = netdev_priv(net); + int ll_mtu = new_mtu + net->hard_header_len + 4; + + netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu); + + if (new_mtu <= 0 || ll_mtu > 16384) + return -EINVAL; + + if ((ll_mtu % dev->maxpacket) == 0) + return -EDOM; + + net->mtu = new_mtu; + dev->hard_mtu = net->mtu + net->hard_header_len; + ax88178_set_mfb(dev); + + return 0; +} + +static const struct net_device_ops ax88178_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_set_mac_address = asix_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_rx_mode = asix_set_multicast, + .ndo_do_ioctl = asix_ioctl, + .ndo_change_mtu = ax88178_change_mtu, +}; + +static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + u8 buf[ETH_ALEN]; + struct asix_data *data = (struct asix_data *)&dev->data; + + data->eeprom_len = AX88772_EEPROM_LEN; + + usbnet_get_endpoints(dev,intf); + + /* Get the MAC address */ + ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + if (ret < 0) { + dbg("Failed to read MAC address: %d", ret); + return ret; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = asix_mdio_read; + dev->mii.mdio_write = asix_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0xff; + dev->mii.supports_gmii = 1; + dev->mii.phy_id = asix_get_phy_addr(dev); + + dev->net->netdev_ops = &ax88178_netdev_ops; + dev->net->ethtool_ops = &ax88178_ethtool_ops; + + /* Blink LEDS so users know driver saw dongle */ + asix_sw_reset(dev, 0); + msleep(150); + + asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); + msleep(150); + + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ + if (dev->driver_info->flags & FLAG_FRAMING_AX) { + /* hard_mtu is still the default - the device does not support + jumbo eth frames */ + dev->rx_urb_size = 2048; + } + + return 0; +} + +static const struct driver_info ax8817x_info = { + .description = "ASIX AX8817x USB 2.0 Ethernet", + .bind = ax88172_bind, + .status = asix_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, + .flags = FLAG_ETHER | FLAG_LINK_INTR, + .data = 0x00130103, +}; + +static const struct driver_info dlink_dub_e100_info = { + .description = "DLink DUB-E100 USB Ethernet", + .bind = ax88172_bind, + .status = asix_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, + .flags = FLAG_ETHER | FLAG_LINK_INTR, + .data = 0x009f9d9f, +}; + +static const struct driver_info netgear_fa120_info = { + .description = "Netgear FA-120 USB Ethernet", + .bind = ax88172_bind, + .status = asix_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, + .flags = FLAG_ETHER | FLAG_LINK_INTR, + .data = 0x00130103, +}; + +static const struct driver_info hawking_uf200_info = { + .description = "Hawking UF200 USB Ethernet", + .bind = ax88172_bind, + .status = asix_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, + .flags = FLAG_ETHER | FLAG_LINK_INTR, + .data = 0x001f1d1f, +}; + +static const struct driver_info ax88772_info = { + .description = "ASIX AX88772 USB 2.0 Ethernet", + .bind = ax88772_bind, + .status = asix_status, + .link_reset = ax88772_link_reset, + .reset = ax88772_reset, + .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, +}; + +static const struct driver_info ax88178_info = { + .description = "ASIX AX88178 USB 2.0 Ethernet", + .bind = ax88178_bind, + .status = asix_status, + .link_reset = ax88178_link_reset, + .reset = ax88178_reset, + .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, +}; + +static const struct usb_device_id products [] = { +{ + // Linksys USB200M + USB_DEVICE (0x077b, 0x2226), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Netgear FA120 + USB_DEVICE (0x0846, 0x1040), + .driver_info = (unsigned long) &netgear_fa120_info, +}, { + // DLink DUB-E100 + USB_DEVICE (0x2001, 0x1a00), + .driver_info = (unsigned long) &dlink_dub_e100_info, +}, { + // Intellinet, ST Lab USB Ethernet + USB_DEVICE (0x0b95, 0x1720), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Hawking UF200, TrendNet TU2-ET100 + USB_DEVICE (0x07b8, 0x420a), + .driver_info = (unsigned long) &hawking_uf200_info, +}, { + // Billionton Systems, USB2AR + USB_DEVICE (0x08dd, 0x90ff), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // ATEN UC210T + USB_DEVICE (0x0557, 0x2009), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Buffalo LUA-U2-KTX + USB_DEVICE (0x0411, 0x003d), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Buffalo LUA-U2-GT 10/100/1000 + USB_DEVICE (0x0411, 0x006e), + .driver_info = (unsigned long) &ax88178_info, +}, { + // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter" + USB_DEVICE (0x6189, 0x182d), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter" + USB_DEVICE (0x0df6, 0x0056), + .driver_info = (unsigned long) &ax88178_info, +}, { + // corega FEther USB2-TX + USB_DEVICE (0x07aa, 0x0017), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // Surecom EP-1427X-2 + USB_DEVICE (0x1189, 0x0893), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // goodway corp usb gwusb2e + USB_DEVICE (0x1631, 0x6200), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // JVC MP-PRX1 Port Replicator + USB_DEVICE (0x04f1, 0x3008), + .driver_info = (unsigned long) &ax8817x_info, +}, { + // ASIX AX88772B 10/100 + USB_DEVICE (0x0b95, 0x772b), + .driver_info = (unsigned long) &ax88772_info, +}, { + // ASIX AX88772 10/100 + USB_DEVICE (0x0b95, 0x7720), + .driver_info = (unsigned long) &ax88772_info, +}, { + // ASIX AX88178 10/100/1000 + USB_DEVICE (0x0b95, 0x1780), + .driver_info = (unsigned long) &ax88178_info, +}, { + // Logitec LAN-GTJ/U2A + USB_DEVICE (0x0789, 0x0160), + .driver_info = (unsigned long) &ax88178_info, +}, { + // Linksys USB200M Rev 2 + USB_DEVICE (0x13b1, 0x0018), + .driver_info = (unsigned long) &ax88772_info, +}, { + // 0Q0 cable ethernet + USB_DEVICE (0x1557, 0x7720), + .driver_info = (unsigned long) &ax88772_info, +}, { + // DLink DUB-E100 H/W Ver B1 + USB_DEVICE (0x07d1, 0x3c05), + .driver_info = (unsigned long) &ax88772_info, +}, { + // DLink DUB-E100 H/W Ver B1 Alternate + USB_DEVICE (0x2001, 0x3c05), + .driver_info = (unsigned long) &ax88772_info, +}, { + // Linksys USB1000 + USB_DEVICE (0x1737, 0x0039), + .driver_info = (unsigned long) &ax88178_info, +}, { + // IO-DATA ETG-US2 + USB_DEVICE (0x04bb, 0x0930), + .driver_info = (unsigned long) &ax88178_info, +}, { + // Belkin F5D5055 + USB_DEVICE(0x050d, 0x5055), + .driver_info = (unsigned long) &ax88178_info, +}, { + // Apple USB Ethernet Adapter + USB_DEVICE(0x05ac, 0x1402), + .driver_info = (unsigned long) &ax88772_info, +}, { + // Cables-to-Go USB Ethernet Adapter + USB_DEVICE(0x0b95, 0x772a), + .driver_info = (unsigned long) &ax88772_info, +}, { + // ABOCOM for pci + USB_DEVICE(0x14ea, 0xab11), + .driver_info = (unsigned long) &ax88178_info, +}, { + // ASIX 88772a + USB_DEVICE(0x0db0, 0xa877), + .driver_info = (unsigned long) &ax88772_info, +}, { + // Asus USB Ethernet Adapter + USB_DEVICE (0x0b95, 0x7e2b), + .driver_info = (unsigned long) &ax88772_info, +}, + { }, // END +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver asix_driver = { + .name = DRIVER_NAME, + .id_table = products, + .probe = usbnet_probe, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .disconnect = usbnet_disconnect, + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(asix_driver); + +MODULE_AUTHOR("David Hollis"); +MODULE_VERSION(DRIVER_VERSION); +MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices"); +MODULE_LICENSE("GPL"); + |