diff options
Diffstat (limited to 'drivers/net/usb/asix_devices.c')
| -rw-r--r-- | drivers/net/usb/asix_devices.c | 40 |
1 files changed, 24 insertions, 16 deletions
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 32e31c5c5dc6..33ab824773c5 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -221,7 +221,8 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) /* Get the MAC address */ ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); if (ret < 0) { - dbg("read AX_CMD_READ_NODE_ID failed: %d", ret); + netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n", + ret); goto out; } memcpy(dev->net->dev_addr, buf, ETH_ALEN); @@ -303,7 +304,7 @@ static int ax88772_reset(struct usbnet *dev) ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); if (ret < 0) { - dbg("Select PHY #1 failed: %d", ret); + netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); goto out; } @@ -331,13 +332,13 @@ static int ax88772_reset(struct usbnet *dev) msleep(150); rx_ctl = asix_read_rx_ctl(dev); - dbg("RX_CTL is 0x%04x after software reset", rx_ctl); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); ret = asix_write_rx_ctl(dev, 0x0000); if (ret < 0) goto out; rx_ctl = asix_read_rx_ctl(dev); - dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl); + netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); ret = asix_sw_reset(dev, AX_SWRESET_PRL); if (ret < 0) @@ -364,7 +365,7 @@ static int ax88772_reset(struct usbnet *dev) AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, AX88772_IPG2_DEFAULT, 0, NULL); if (ret < 0) { - dbg("Write IPG,IPG1,IPG2 failed: %d", ret); + netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); goto out; } @@ -381,10 +382,13 @@ static int ax88772_reset(struct usbnet *dev) goto out; rx_ctl = asix_read_rx_ctl(dev); - dbg("RX_CTL is 0x%04x after all initializations", rx_ctl); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", + rx_ctl); rx_ctl = asix_read_medium_status(dev); - dbg("Medium Status is 0x%04x after all initializations", rx_ctl); + netdev_dbg(dev->net, + "Medium Status is 0x%04x after all initializations\n", + rx_ctl); return 0; @@ -416,7 +420,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) /* Get the MAC address */ ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); if (ret < 0) { - dbg("Failed to read MAC address: %d", ret); + netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret); return ret; } memcpy(dev->net->dev_addr, buf, ETH_ALEN); @@ -439,7 +443,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) /* Reset the PHY to normal operation mode */ ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); if (ret < 0) { - dbg("Select PHY #1 failed: %d", ret); + netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); return ret; } @@ -459,7 +463,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) /* Read PHYID register *AFTER* the PHY was reset properly */ phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); + netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid); /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ if (dev->driver_info->flags & FLAG_FRAMING_AX) { @@ -575,13 +579,13 @@ static int ax88178_reset(struct usbnet *dev) u32 phyid; asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status); - dbg("GPIO Status: 0x%04x", status); + netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status); asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL); asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom); asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL); - dbg("EEPROM index 0x17 is 0x%04x", eeprom); + netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom); if (eeprom == cpu_to_le16(0xffff)) { data->phymode = PHY_MODE_MARVELL; @@ -592,7 +596,7 @@ static int ax88178_reset(struct usbnet *dev) data->ledmode = le16_to_cpu(eeprom) >> 8; gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1; } - dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode); + netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode); /* Power up external GigaPHY through AX88178 GPIO pin */ asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40); @@ -601,14 +605,14 @@ static int ax88178_reset(struct usbnet *dev) asix_write_gpio(dev, 0x001c, 300); asix_write_gpio(dev, 0x003c, 30); } else { - dbg("gpio phymode == 1 path"); + netdev_dbg(dev->net, "gpio phymode == 1 path\n"); asix_write_gpio(dev, AX_GPIO_GPO1EN, 30); asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30); } /* Read PHYID register *AFTER* powering up PHY */ phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); + netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid); /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */ asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL); @@ -770,7 +774,7 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) /* Get the MAC address */ ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); if (ret < 0) { - dbg("Failed to read MAC address: %d", ret); + netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret); return ret; } memcpy(dev->net->dev_addr, buf, ETH_ALEN); @@ -930,6 +934,10 @@ static const struct usb_device_id products [] = { USB_DEVICE (0x04f1, 0x3008), .driver_info = (unsigned long) &ax8817x_info, }, { + // Lenovo U2L100P 10/100 + USB_DEVICE (0x17ef, 0x7203), + .driver_info = (unsigned long) &ax88772_info, +}, { // ASIX AX88772B 10/100 USB_DEVICE (0x0b95, 0x772b), .driver_info = (unsigned long) &ax88772_info, |