diff options
Diffstat (limited to 'drivers/net/wan/farsync.c')
| -rw-r--r-- | drivers/net/wan/farsync.c | 487 |
1 files changed, 204 insertions, 283 deletions
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 5de71e44fc5a..b3466e084e84 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later -/* - * FarSync WAN driver for Linux (2.6.x kernel version) +/* FarSync WAN driver for Linux (2.6.x kernel version) * * Actually sync driver for X.21, V.35 and V.24 on FarSync T-series cards * @@ -30,8 +29,7 @@ #include "farsync.h" -/* - * Module info +/* Module info */ MODULE_AUTHOR("R.J.Dunlop <bob.dunlop@farsite.co.uk>"); MODULE_DESCRIPTION("FarSync T-Series WAN driver. FarSite Communications Ltd."); @@ -49,20 +47,23 @@ MODULE_LICENSE("GPL"); /* Default parameters for the link */ #define FST_TX_QUEUE_LEN 100 /* At 8Mbps a longer queue length is - * useful */ + * useful + */ #define FST_TXQ_DEPTH 16 /* This one is for the buffering * of frames on the way down to the card * so that we can keep the card busy * and maximise throughput */ #define FST_HIGH_WATER_MARK 12 /* Point at which we flow control - * network layer */ + * network layer + */ #define FST_LOW_WATER_MARK 8 /* Point at which we remove flow - * control from network layer */ + * control from network layer + */ #define FST_MAX_MTU 8000 /* Huge but possible */ #define FST_DEF_MTU 1500 /* Common sane value */ -#define FST_TX_TIMEOUT (2*HZ) +#define FST_TX_TIMEOUT (2 * HZ) #ifdef ARPHRD_RAWHDLC #define ARPHRD_MYTYPE ARPHRD_RAWHDLC /* Raw frames */ @@ -70,13 +71,12 @@ MODULE_LICENSE("GPL"); #define ARPHRD_MYTYPE ARPHRD_HDLC /* Cisco-HDLC (keepalives etc) */ #endif -/* - * Modules parameters and associated variables +/* Modules parameters and associated variables */ static int fst_txq_low = FST_LOW_WATER_MARK; static int fst_txq_high = FST_HIGH_WATER_MARK; static int fst_max_reads = 7; -static int fst_excluded_cards = 0; +static int fst_excluded_cards; static int fst_excluded_list[FST_MAX_CARDS]; module_param(fst_txq_low, int, 0); @@ -105,9 +105,11 @@ module_param_array(fst_excluded_list, int, NULL, 0); #define FST_MEMSIZE 0x100000 /* Size of card memory (1Mb) */ #define SMC_BASE 0x00002000L /* Base offset of the shared memory window main - * configuration structure */ + * configuration structure + */ #define BFM_BASE 0x00010000L /* Base offset of the shared memory window DMA - * buffers */ + * buffers + */ #define LEN_TX_BUFFER 8192 /* Size of packet buffers */ #define LEN_RX_BUFFER 8192 @@ -377,8 +379,7 @@ struct fst_shared { #define INTCSR_9054 0x68 /* Interrupt control/status register */ /* 9054 DMA Registers */ -/* - * Note that we will be using DMA Channel 0 for copying rx data +/* Note that we will be using DMA Channel 0 for copying rx data * and Channel 1 for copying tx data */ #define DMAMODE0 0x80 @@ -421,7 +422,7 @@ struct buf_window { /* Per port (line or channel) information */ struct fst_port_info { - struct net_device *dev; /* Device struct - must be first */ + struct net_device *dev; /* Device struct - must be first */ struct fst_card_info *card; /* Card we're associated with */ int index; /* Port index on the card */ int hwif; /* Line hardware (lineInterface copy) */ @@ -431,8 +432,7 @@ struct fst_port_info { int txpos; /* Next Tx buffer to use */ int txipos; /* Next Tx buffer to check for free */ int start; /* Indication of start/stop to network */ - /* - * A sixteen entry transmit queue + /* A sixteen entry transmit queue */ int txqs; /* index to get next buffer to tx */ int txqe; /* index to queue next packet */ @@ -479,9 +479,7 @@ struct fst_card_info { #define dev_to_port(D) (dev_to_hdlc(D)->priv) #define port_to_dev(P) ((P)->dev) - -/* - * Shared memory window access macros +/* Shared memory window access macros * * We have a nice memory based structure above, which could be directly * mapped on i386 but might not work on other architectures unless we use @@ -491,16 +489,15 @@ struct fst_card_info { */ #define WIN_OFFSET(X) ((long)&(((struct fst_shared *)SMC_BASE)->X)) -#define FST_RDB(C,E) readb ((C)->mem + WIN_OFFSET(E)) -#define FST_RDW(C,E) readw ((C)->mem + WIN_OFFSET(E)) -#define FST_RDL(C,E) readl ((C)->mem + WIN_OFFSET(E)) +#define FST_RDB(C, E) (readb((C)->mem + WIN_OFFSET(E))) +#define FST_RDW(C, E) (readw((C)->mem + WIN_OFFSET(E))) +#define FST_RDL(C, E) (readl((C)->mem + WIN_OFFSET(E))) -#define FST_WRB(C,E,B) writeb ((B), (C)->mem + WIN_OFFSET(E)) -#define FST_WRW(C,E,W) writew ((W), (C)->mem + WIN_OFFSET(E)) -#define FST_WRL(C,E,L) writel ((L), (C)->mem + WIN_OFFSET(E)) +#define FST_WRB(C, E, B) (writeb((B), (C)->mem + WIN_OFFSET(E))) +#define FST_WRW(C, E, W) (writew((W), (C)->mem + WIN_OFFSET(E))) +#define FST_WRL(C, E, L) (writel((L), (C)->mem + WIN_OFFSET(E))) -/* - * Debug support +/* Debug support */ #if FST_DEBUG @@ -524,43 +521,41 @@ do { \ } while (0) #endif -/* - * PCI ID lookup table +/* PCI ID lookup table */ static const struct pci_device_id fst_pci_dev_id[] = { - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2P, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2P, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_T2P}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4P, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4P, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_T4P}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T1U, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T1U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_T1U}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2U, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_T2U}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4U, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_T4U}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_TE1}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1C, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_TE1}, {0,} /* End */ }; MODULE_DEVICE_TABLE(pci, fst_pci_dev_id); -/* - * Device Driver Work Queues +/* Device Driver Work Queues * - * So that we don't spend too much time processing events in the - * Interrupt Service routine, we will declare a work queue per Card + * So that we don't spend too much time processing events in the + * Interrupt Service routine, we will declare a work queue per Card * and make the ISR schedule a task in the queue for later execution. * In the 2.4 Kernel we used to use the immediate queue for BH's - * Now that they are gone, tasklets seem to be much better than work + * Now that they are gone, tasklets seem to be much better than work * queues. */ @@ -578,18 +573,16 @@ static u64 fst_work_txq; static u64 fst_work_intq; static void -fst_q_work_item(u64 * queue, int card_index) +fst_q_work_item(u64 *queue, int card_index) { unsigned long flags; u64 mask; - /* - * Grab the queue exclusively + /* Grab the queue exclusively */ spin_lock_irqsave(&fst_work_q_lock, flags); - /* - * Making an entry in the queue is simply a matter of setting + /* Making an entry in the queue is simply a matter of setting * a bit for the card indicating that there is work to do in the * bottom half for the card. Note the limitation of 64 cards. * That ought to be enough @@ -606,8 +599,7 @@ fst_process_tx_work_q(struct tasklet_struct *unused) u64 work_txq; int i; - /* - * Grab the queue exclusively + /* Grab the queue exclusively */ dbg(DBG_TX, "fst_process_tx_work_q\n"); spin_lock_irqsave(&fst_work_q_lock, flags); @@ -615,12 +607,11 @@ fst_process_tx_work_q(struct tasklet_struct *unused) fst_work_txq = 0; spin_unlock_irqrestore(&fst_work_q_lock, flags); - /* - * Call the bottom half for each card with work waiting + /* Call the bottom half for each card with work waiting */ for (i = 0; i < FST_MAX_CARDS; i++) { if (work_txq & 0x01) { - if (fst_card_array[i] != NULL) { + if (fst_card_array[i]) { dbg(DBG_TX, "Calling tx bh for card %d\n", i); do_bottom_half_tx(fst_card_array[i]); } @@ -636,8 +627,7 @@ fst_process_int_work_q(struct tasklet_struct *unused) u64 work_intq; int i; - /* - * Grab the queue exclusively + /* Grab the queue exclusively */ dbg(DBG_INTR, "fst_process_int_work_q\n"); spin_lock_irqsave(&fst_work_q_lock, flags); @@ -645,12 +635,11 @@ fst_process_int_work_q(struct tasklet_struct *unused) fst_work_intq = 0; spin_unlock_irqrestore(&fst_work_q_lock, flags); - /* - * Call the bottom half for each card with work waiting + /* Call the bottom half for each card with work waiting */ for (i = 0; i < FST_MAX_CARDS; i++) { if (work_intq & 0x01) { - if (fst_card_array[i] != NULL) { + if (fst_card_array[i]) { dbg(DBG_INTR, "Calling rx & tx bh for card %d\n", i); do_bottom_half_rx(fst_card_array[i]); @@ -683,19 +672,16 @@ fst_cpureset(struct fst_card_info *card) dbg(DBG_ASS, "Error in reading interrupt line register\n"); } - /* - * Assert PLX software reset and Am186 hardware reset + /* Assert PLX software reset and Am186 hardware reset * and then deassert the PLX software reset but 186 still in reset */ outw(0x440f, card->pci_conf + CNTRL_9054 + 2); outw(0x040f, card->pci_conf + CNTRL_9054 + 2); - /* - * We are delaying here to allow the 9054 to reset itself + /* We are delaying here to allow the 9054 to reset itself */ usleep_range(10, 20); outw(0x240f, card->pci_conf + CNTRL_9054 + 2); - /* - * We are delaying here to allow the 9054 to reload its eeprom + /* We are delaying here to allow the 9054 to reload its eeprom */ usleep_range(10, 20); outw(0x040f, card->pci_conf + CNTRL_9054 + 2); @@ -720,19 +706,17 @@ static inline void fst_cpurelease(struct fst_card_info *card) { if (card->family == FST_FAMILY_TXU) { - /* - * Force posted writes to complete + /* Force posted writes to complete */ - (void) readb(card->mem); + (void)readb(card->mem); - /* - * Release LRESET DO = 1 + /* Release LRESET DO = 1 * Then release Local Hold, DO = 1 */ outw(0x040e, card->pci_conf + CNTRL_9054 + 2); outw(0x040f, card->pci_conf + CNTRL_9054 + 2); } else { - (void) readb(card->ctlmem); + (void)readb(card->ctlmem); } } @@ -742,7 +726,7 @@ static inline void fst_clear_intr(struct fst_card_info *card) { if (card->family == FST_FAMILY_TXU) { - (void) readb(card->ctlmem); + (void)readb(card->ctlmem); } else { /* Poke the appropriate PLX chip register (same as enabling interrupts) */ @@ -755,11 +739,10 @@ fst_clear_intr(struct fst_card_info *card) static inline void fst_enable_intr(struct fst_card_info *card) { - if (card->family == FST_FAMILY_TXU) { + if (card->family == FST_FAMILY_TXU) outl(0x0f0c0900, card->pci_conf + INTCSR_9054); - } else { + else outw(0x0543, card->pci_conf + INTCSR_9052); - } } /* Disable card interrupts @@ -767,11 +750,10 @@ fst_enable_intr(struct fst_card_info *card) static inline void fst_disable_intr(struct fst_card_info *card) { - if (card->family == FST_FAMILY_TXU) { + if (card->family == FST_FAMILY_TXU) outl(0x00000000, card->pci_conf + INTCSR_9054); - } else { + else outw(0x0000, card->pci_conf + INTCSR_9052); - } } /* Process the result of trying to pass a received frame up the stack @@ -782,8 +764,7 @@ fst_process_rx_status(int rx_status, char *name) switch (rx_status) { case NET_RX_SUCCESS: { - /* - * Nothing to do here + /* Nothing to do here */ break; } @@ -800,11 +781,10 @@ fst_process_rx_status(int rx_status, char *name) static inline void fst_init_dma(struct fst_card_info *card) { - /* - * This is only required for the PLX 9054 + /* This is only required for the PLX 9054 */ if (card->family == FST_FAMILY_TXU) { - pci_set_master(card->device); + pci_set_master(card->device); outl(0x00020441, card->pci_conf + DMAMODE0); outl(0x00020441, card->pci_conf + DMAMODE1); outl(0x0, card->pci_conf + DMATHR); @@ -819,8 +799,7 @@ fst_tx_dma_complete(struct fst_card_info *card, struct fst_port_info *port, { struct net_device *dev = port_to_dev(port); - /* - * Everything is now set, just tell the card to go + /* Everything is now set, just tell the card to go */ dbg(DBG_TX, "fst_tx_dma_complete\n"); FST_WRB(card, txDescrRing[port->index][txpos].bits, @@ -830,8 +809,7 @@ fst_tx_dma_complete(struct fst_card_info *card, struct fst_port_info *port, netif_trans_update(dev); } -/* - * Mark it for our own raw sockets interface +/* Mark it for our own raw sockets interface */ static __be16 farsync_type_trans(struct sk_buff *skb, struct net_device *dev) { @@ -874,55 +852,47 @@ fst_rx_dma_complete(struct fst_card_info *card, struct fst_port_info *port, dev->stats.rx_dropped++; } -/* - * Receive a frame through the DMA +/* Receive a frame through the DMA */ static inline void fst_rx_dma(struct fst_card_info *card, dma_addr_t dma, u32 mem, int len) { - /* - * This routine will setup the DMA and start it + /* This routine will setup the DMA and start it */ dbg(DBG_RX, "In fst_rx_dma %x %x %d\n", (u32)dma, mem, len); - if (card->dmarx_in_progress) { + if (card->dmarx_in_progress) dbg(DBG_ASS, "In fst_rx_dma while dma in progress\n"); - } outl(dma, card->pci_conf + DMAPADR0); /* Copy to here */ outl(mem, card->pci_conf + DMALADR0); /* from here */ outl(len, card->pci_conf + DMASIZ0); /* for this length */ outl(0x00000000c, card->pci_conf + DMADPR0); /* In this direction */ - /* - * We use the dmarx_in_progress flag to flag the channel as busy + /* We use the dmarx_in_progress flag to flag the channel as busy */ card->dmarx_in_progress = 1; outb(0x03, card->pci_conf + DMACSR0); /* Start the transfer */ } -/* - * Send a frame through the DMA +/* Send a frame through the DMA */ static inline void fst_tx_dma(struct fst_card_info *card, dma_addr_t dma, u32 mem, int len) { - /* - * This routine will setup the DMA and start it. + /* This routine will setup the DMA and start it. */ dbg(DBG_TX, "In fst_tx_dma %x %x %d\n", (u32)dma, mem, len); - if (card->dmatx_in_progress) { + if (card->dmatx_in_progress) dbg(DBG_ASS, "In fst_tx_dma while dma in progress\n"); - } outl(dma, card->pci_conf + DMAPADR1); /* Copy from here */ outl(mem, card->pci_conf + DMALADR1); /* to here */ outl(len, card->pci_conf + DMASIZ1); /* for this length */ outl(0x000000004, card->pci_conf + DMADPR1); /* In this direction */ - /* - * We use the dmatx_in_progress to flag the channel as busy + /* We use the dmatx_in_progress to flag the channel as busy */ card->dmatx_in_progress = 1; outb(0x03, card->pci_conf + DMACSR1); /* Start the transfer */ @@ -958,12 +928,11 @@ fst_issue_cmd(struct fst_port_info *port, unsigned short cmd) mbval = FST_RDW(card, portMailbox[port->index][0]); } - if (safety > 0) { + if (safety > 0) dbg(DBG_CMD, "Mailbox clear after %d jiffies\n", safety); - } - if (mbval == NAK) { + + if (mbval == NAK) dbg(DBG_CMD, "issue_cmd: previous command was NAK'd\n"); - } FST_WRW(card, portMailbox[port->index][0], cmd); @@ -998,8 +967,7 @@ fst_op_lower(struct fst_port_info *port, unsigned int outputs) fst_issue_cmd(port, SETV24O); } -/* - * Setup port Rx buffers +/* Setup port Rx buffers */ static void fst_rx_config(struct fst_port_info *port) @@ -1016,8 +984,8 @@ fst_rx_config(struct fst_port_info *port) for (i = 0; i < NUM_RX_BUFFER; i++) { offset = BUF_OFFSET(rxBuffer[pi][i][0]); - FST_WRW(card, rxDescrRing[pi][i].ladr, (u16) offset); - FST_WRB(card, rxDescrRing[pi][i].hadr, (u8) (offset >> 16)); + FST_WRW(card, rxDescrRing[pi][i].ladr, (u16)offset); + FST_WRB(card, rxDescrRing[pi][i].hadr, (u8)(offset >> 16)); FST_WRW(card, rxDescrRing[pi][i].bcnt, cnv_bcnt(LEN_RX_BUFFER)); FST_WRW(card, rxDescrRing[pi][i].mcnt, LEN_RX_BUFFER); FST_WRB(card, rxDescrRing[pi][i].bits, DMA_OWN); @@ -1026,8 +994,7 @@ fst_rx_config(struct fst_port_info *port) spin_unlock_irqrestore(&card->card_lock, flags); } -/* - * Setup port Tx buffers +/* Setup port Tx buffers */ static void fst_tx_config(struct fst_port_info *port) @@ -1044,8 +1011,8 @@ fst_tx_config(struct fst_port_info *port) for (i = 0; i < NUM_TX_BUFFER; i++) { offset = BUF_OFFSET(txBuffer[pi][i][0]); - FST_WRW(card, txDescrRing[pi][i].ladr, (u16) offset); - FST_WRB(card, txDescrRing[pi][i].hadr, (u8) (offset >> 16)); + FST_WRW(card, txDescrRing[pi][i].ladr, (u16)offset); + FST_WRB(card, txDescrRing[pi][i].hadr, (u8)(offset >> 16)); FST_WRW(card, txDescrRing[pi][i].bcnt, 0); FST_WRB(card, txDescrRing[pi][i].bits, 0); } @@ -1069,16 +1036,14 @@ fst_intr_te1_alarm(struct fst_card_info *card, struct fst_port_info *port) ais = FST_RDB(card, suStatus.alarmIndicationSignal); if (los) { - /* - * Lost the link + /* Lost the link */ if (netif_carrier_ok(port_to_dev(port))) { dbg(DBG_INTR, "Net carrier off\n"); netif_carrier_off(port_to_dev(port)); } } else { - /* - * Link available + /* Link available */ if (!netif_carrier_ok(port_to_dev(port))) { dbg(DBG_INTR, "Net carrier on\n"); @@ -1110,7 +1075,7 @@ fst_intr_ctlchg(struct fst_card_info *card, struct fst_port_info *port) signals = FST_RDL(card, v24DebouncedSts[port->index]); - if (signals & (((port->hwif == X21) || (port->hwif == X21D)) + if (signals & ((port->hwif == X21 || port->hwif == X21D) ? IPSTS_INDICATE : IPSTS_DCD)) { if (!netif_carrier_ok(port_to_dev(port))) { dbg(DBG_INTR, "DCD active\n"); @@ -1132,8 +1097,7 @@ fst_log_rx_error(struct fst_card_info *card, struct fst_port_info *port, { struct net_device *dev = port_to_dev(port); - /* - * Increment the appropriate error counter + /* Increment the appropriate error counter */ dev->stats.rx_errors++; if (dmabits & RX_OFLO) { @@ -1168,15 +1132,14 @@ fst_recover_rx_error(struct fst_card_info *card, struct fst_port_info *port, int pi; pi = port->index; - /* - * Discard buffer descriptors until we see the start of the + /* Discard buffer descriptors until we see the start of the * next frame. Note that for long frames this could be in - * a subsequent interrupt. + * a subsequent interrupt. */ i = 0; while ((dmabits & (DMA_OWN | RX_STP)) == 0) { FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN); - rxp = (rxp+1) % NUM_RX_BUFFER; + rxp = (rxp + 1) % NUM_RX_BUFFER; if (++i > NUM_RX_BUFFER) { dbg(DBG_ASS, "intr_rx: Discarding more bufs" " than we have\n"); @@ -1190,11 +1153,9 @@ fst_recover_rx_error(struct fst_card_info *card, struct fst_port_info *port, /* Discard the terminal buffer */ if (!(dmabits & DMA_OWN)) { FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN); - rxp = (rxp+1) % NUM_RX_BUFFER; + rxp = (rxp + 1) % NUM_RX_BUFFER; } port->rxpos = rxp; - return; - } /* Rx complete interrupt @@ -1219,17 +1180,15 @@ fst_intr_rx(struct fst_card_info *card, struct fst_port_info *port) pi, rxp); return; } - if (card->dmarx_in_progress) { + if (card->dmarx_in_progress) return; - } /* Get buffer length */ len = FST_RDW(card, rxDescrRing[pi][rxp].mcnt); /* Discard the CRC */ len -= 2; if (len == 0) { - /* - * This seems to happen on the TE1 interface sometimes + /* This seems to happen on the TE1 interface sometimes * so throw the frame away and log the event. */ pr_err("Frame received with 0 length. Card %d Port %d\n", @@ -1237,7 +1196,7 @@ fst_intr_rx(struct fst_card_info *card, struct fst_port_info *port) /* Return descriptor to card */ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN); - rxp = (rxp+1) % NUM_RX_BUFFER; + rxp = (rxp + 1) % NUM_RX_BUFFER; port->rxpos = rxp; return; } @@ -1254,7 +1213,8 @@ fst_intr_rx(struct fst_card_info *card, struct fst_port_info *port) } /* Allocate SKB */ - if ((skb = dev_alloc_skb(len)) == NULL) { + skb = dev_alloc_skb(len); + if (!skb) { dbg(DBG_RX, "intr_rx: can't allocate buffer\n"); dev->stats.rx_dropped++; @@ -1262,18 +1222,17 @@ fst_intr_rx(struct fst_card_info *card, struct fst_port_info *port) /* Return descriptor to card */ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN); - rxp = (rxp+1) % NUM_RX_BUFFER; + rxp = (rxp + 1) % NUM_RX_BUFFER; port->rxpos = rxp; return; } - /* - * We know the length we need to receive, len. + /* We know the length we need to receive, len. * It's not worth using the DMA for reads of less than * FST_MIN_DMA_LEN */ - if ((len < FST_MIN_DMA_LEN) || (card->family == FST_FAMILY_TXP)) { + if (len < FST_MIN_DMA_LEN || card->family == FST_FAMILY_TXP) { memcpy_fromio(skb_put(skb, len), card->mem + BUF_OFFSET(rxBuffer[pi][rxp][0]), len); @@ -1307,12 +1266,11 @@ fst_intr_rx(struct fst_card_info *card, struct fst_port_info *port) dbg(DBG_ASS, "About to increment rxpos by more than 1\n"); dbg(DBG_ASS, "rxp = %d rxpos = %d\n", rxp, port->rxpos); } - rxp = (rxp+1) % NUM_RX_BUFFER; + rxp = (rxp + 1) % NUM_RX_BUFFER; port->rxpos = rxp; } -/* - * The bottom halfs to the ISR +/* The bottom half to the ISR * */ @@ -1326,8 +1284,7 @@ do_bottom_half_tx(struct fst_card_info *card) unsigned long flags; struct net_device *dev; - /* - * Find a free buffer for the transmit + /* Find a free buffer for the transmit * Step through each port on this card */ @@ -1340,39 +1297,36 @@ do_bottom_half_tx(struct fst_card_info *card) while (!(FST_RDB(card, txDescrRing[pi][port->txpos].bits) & DMA_OWN) && !(card->dmatx_in_progress)) { - /* - * There doesn't seem to be a txdone event per-se + /* There doesn't seem to be a txdone event per-se * We seem to have to deduce it, by checking the DMA_OWN * bit on the next buffer we think we can use */ spin_lock_irqsave(&card->card_lock, flags); - if ((txq_length = port->txqe - port->txqs) < 0) { - /* - * This is the case where one has wrapped and the + txq_length = port->txqe - port->txqs; + if (txq_length < 0) { + /* This is the case where one has wrapped and the * maths gives us a negative number */ txq_length = txq_length + FST_TXQ_DEPTH; } spin_unlock_irqrestore(&card->card_lock, flags); if (txq_length > 0) { - /* - * There is something to send + /* There is something to send */ spin_lock_irqsave(&card->card_lock, flags); skb = port->txq[port->txqs]; port->txqs++; - if (port->txqs == FST_TXQ_DEPTH) { + if (port->txqs == FST_TXQ_DEPTH) port->txqs = 0; - } + spin_unlock_irqrestore(&card->card_lock, flags); - /* - * copy the data and set the required indicators on the + /* copy the data and set the required indicators on the * card. */ FST_WRW(card, txDescrRing[pi][port->txpos].bcnt, cnv_bcnt(skb->len)); - if ((skb->len < FST_MIN_DMA_LEN) || - (card->family == FST_FAMILY_TXP)) { + if (skb->len < FST_MIN_DMA_LEN || + card->family == FST_FAMILY_TXP) { /* Enqueue the packet with normal io */ memcpy_toio(card->mem + BUF_OFFSET(txBuffer[pi] @@ -1401,8 +1355,7 @@ do_bottom_half_tx(struct fst_card_info *card) } if (++port->txpos >= NUM_TX_BUFFER) port->txpos = 0; - /* - * If we have flow control on, can we now release it? + /* If we have flow control on, can we now release it? */ if (port->start) { if (txq_length < fst_txq_low) { @@ -1413,8 +1366,7 @@ do_bottom_half_tx(struct fst_card_info *card) } dev_kfree_skb(skb); } else { - /* - * Nothing to send so break out of the while loop + /* Nothing to send so break out of the while loop */ break; } @@ -1438,8 +1390,7 @@ do_bottom_half_rx(struct fst_card_info *card) while (!(FST_RDB(card, rxDescrRing[pi][port->rxpos].bits) & DMA_OWN) && !(card->dmarx_in_progress)) { if (rx_count > fst_max_reads) { - /* - * Don't spend forever in receive processing + /* Don't spend forever in receive processing * Schedule another event */ fst_q_work_item(&fst_work_intq, card->card_no); @@ -1452,8 +1403,7 @@ do_bottom_half_rx(struct fst_card_info *card) } } -/* - * The interrupt service routine +/* The interrupt service routine * Dev_id is our fst_card_info pointer */ static irqreturn_t @@ -1468,8 +1418,7 @@ fst_intr(int dummy, void *dev_id) unsigned int do_card_interrupt; unsigned int int_retry_count; - /* - * Check to see if the interrupt was for this card + /* Check to see if the interrupt was for this card * return if not * Note that the call to clear the interrupt is important */ @@ -1478,10 +1427,9 @@ fst_intr(int dummy, void *dev_id) pr_err("Interrupt received for card %d in a non running state (%d)\n", card->card_no, card->state); - /* - * It is possible to really be running, i.e. we have re-loaded + /* It is possible to really be running, i.e. we have re-loaded * a running card - * Clear and reprime the interrupt source + * Clear and reprime the interrupt source */ fst_clear_intr(card); return IRQ_HANDLED; @@ -1490,8 +1438,7 @@ fst_intr(int dummy, void *dev_id) /* Clear and reprime the interrupt source */ fst_clear_intr(card); - /* - * Is the interrupt for this card (handshake == 1) + /* Is the interrupt for this card (handshake == 1) */ do_card_interrupt = 0; if (FST_RDB(card, interruptHandshake) == 1) { @@ -1500,13 +1447,11 @@ fst_intr(int dummy, void *dev_id) FST_WRB(card, interruptHandshake, 0xEE); } if (card->family == FST_FAMILY_TXU) { - /* - * Is it a DMA Interrupt + /* Is it a DMA Interrupt */ dma_intcsr = inl(card->pci_conf + INTCSR_9054); if (dma_intcsr & 0x00200000) { - /* - * DMA Channel 0 (Rx transfer complete) + /* DMA Channel 0 (Rx transfer complete) */ dbg(DBG_RX, "DMA Rx xfer complete\n"); outb(0x8, card->pci_conf + DMACSR0); @@ -1517,8 +1462,7 @@ fst_intr(int dummy, void *dev_id) do_card_interrupt += FST_RX_DMA_INT; } if (dma_intcsr & 0x00400000) { - /* - * DMA Channel 1 (Tx transfer complete) + /* DMA Channel 1 (Tx transfer complete) */ dbg(DBG_TX, "DMA Tx xfer complete\n"); outb(0x8, card->pci_conf + DMACSR1); @@ -1529,8 +1473,7 @@ fst_intr(int dummy, void *dev_id) } } - /* - * Have we been missing Interrupts + /* Have we been missing Interrupts */ int_retry_count = FST_RDL(card, interruptRetryCount); if (int_retry_count) { @@ -1539,9 +1482,8 @@ fst_intr(int dummy, void *dev_id) FST_WRL(card, interruptRetryCount, 0); } - if (!do_card_interrupt) { + if (!do_card_interrupt) return IRQ_HANDLED; - } /* Scehdule the bottom half of the ISR */ fst_q_work_item(&fst_work_intq, card->card_no); @@ -1611,7 +1553,7 @@ fst_intr(int dummy, void *dev_id) rdidx = 0; } FST_WRB(card, interruptEvent.rdindex, rdidx); - return IRQ_HANDLED; + return IRQ_HANDLED; } /* Check that the shared memory configuration is one that we can handle @@ -1635,7 +1577,8 @@ check_started_ok(struct fst_card_info *card) return; } /* Firmware status flag, 0x00 = initialising, 0x01 = OK, 0xFF = fail */ - if ((i = FST_RDB(card, taskStatus)) == 0x01) { + i = FST_RDB(card, taskStatus); + if (i == 0x01) { card->state = FST_RUNNING; } else if (i == 0xFF) { pr_err("Firmware initialisation failed. Card halted\n"); @@ -1665,8 +1608,8 @@ set_conf_from_info(struct fst_card_info *card, struct fst_port_info *port, int err; unsigned char my_framing; - /* Set things according to the user set valid flags - * Several of the old options have been invalidated/replaced by the + /* Set things according to the user set valid flags + * Several of the old options have been invalidated/replaced by the * generic hdlc package. */ err = 0; @@ -1740,9 +1683,8 @@ set_conf_from_info(struct fst_card_info *card, struct fst_port_info *port, #endif } #if FST_DEBUG - if (info->valid & FSTVAL_DEBUG) { + if (info->valid & FSTVAL_DEBUG) fst_debug_mask = info->debug; - } #endif return err; @@ -1754,7 +1696,7 @@ gather_conf_info(struct fst_card_info *card, struct fst_port_info *port, { int i; - memset(info, 0, sizeof (struct fstioc_info)); + memset(info, 0, sizeof(struct fstioc_info)); i = port->index; info->kernelVersion = LINUX_VERSION_CODE; @@ -1787,27 +1729,23 @@ gather_conf_info(struct fst_card_info *card, struct fst_port_info *port, info->cardMode = FST_RDW(card, cardMode); info->smcFirmwareVersion = FST_RDL(card, smcFirmwareVersion); - /* - * The T2U can report cable presence for both A or B - * in bits 0 and 1 of cableStatus. See which port we are and + /* The T2U can report cable presence for both A or B + * in bits 0 and 1 of cableStatus. See which port we are and * do the mapping. */ if (card->family == FST_FAMILY_TXU) { if (port->index == 0) { - /* - * Port A + /* Port A */ info->cableStatus = info->cableStatus & 1; } else { - /* - * Port B + /* Port B */ info->cableStatus = info->cableStatus >> 1; info->cableStatus = info->cableStatus & 1; } } - /* - * Some additional bits if we are TE1 + /* Some additional bits if we are TE1 */ if (card->type == FST_TYPE_TE1) { info->lineSpeed = FST_RDL(card, suConfig.dataRate); @@ -1851,14 +1789,12 @@ fst_set_iface(struct fst_card_info *card, struct fst_port_info *port, sync_serial_settings sync; int i; - if (ifr->ifr_settings.size != sizeof (sync)) { + if (ifr->ifr_settings.size != sizeof(sync)) return -ENOMEM; - } if (copy_from_user - (&sync, ifr->ifr_settings.ifs_ifsu.sync, sizeof (sync))) { + (&sync, ifr->ifr_settings.ifs_ifsu.sync, sizeof(sync))) return -EFAULT; - } if (sync.loopback) return -EINVAL; @@ -1951,12 +1887,11 @@ fst_get_iface(struct fst_card_info *card, struct fst_port_info *port, ifr->ifr_settings.type = IF_IFACE_X21; break; } - if (ifr->ifr_settings.size == 0) { + if (ifr->ifr_settings.size == 0) return 0; /* only type requested */ - } - if (ifr->ifr_settings.size < sizeof (sync)) { + + if (ifr->ifr_settings.size < sizeof(sync)) return -ENOMEM; - } i = port->index; memset(&sync, 0, sizeof(sync)); @@ -1966,11 +1901,10 @@ fst_get_iface(struct fst_card_info *card, struct fst_port_info *port, INTCLK ? CLOCK_INT : CLOCK_EXT; sync.loopback = 0; - if (copy_to_user(ifr->ifr_settings.ifs_ifsu.sync, &sync, sizeof (sync))) { + if (copy_to_user(ifr->ifr_settings.ifs_ifsu.sync, &sync, sizeof(sync))) return -EFAULT; - } - ifr->ifr_settings.size = sizeof (sync); + ifr->ifr_settings.size = sizeof(sync); return 0; } @@ -2008,21 +1942,19 @@ fst_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /* First copy in the header with the length and offset of data * to write */ - if (ifr->ifr_data == NULL) { + if (!ifr->ifr_data) return -EINVAL; - } + if (copy_from_user(&wrthdr, ifr->ifr_data, - sizeof (struct fstioc_write))) { + sizeof(struct fstioc_write))) return -EFAULT; - } /* Sanity check the parameters. We don't support partial writes * when going over the top */ if (wrthdr.size > FST_MEMSIZE || wrthdr.offset > FST_MEMSIZE || - wrthdr.size + wrthdr.offset > FST_MEMSIZE) { + wrthdr.size + wrthdr.offset > FST_MEMSIZE) return -ENXIO; - } /* Now copy the data to the card. */ @@ -2037,9 +1969,9 @@ fst_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /* Writes to the memory of a card in the reset state constitute * a download */ - if (card->state == FST_RESET) { + if (card->state == FST_RESET) card->state = FST_DOWNLOAD; - } + return 0; case FSTGETCONF: @@ -2059,21 +1991,18 @@ fst_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) } } - if (ifr->ifr_data == NULL) { + if (!ifr->ifr_data) return -EINVAL; - } gather_conf_info(card, port, &info); - if (copy_to_user(ifr->ifr_data, &info, sizeof (info))) { + if (copy_to_user(ifr->ifr_data, &info, sizeof(info))) return -EFAULT; - } + return 0; case FSTSETCONF: - - /* - * Most of the settings have been moved to the generic ioctls + /* Most of the settings have been moved to the generic ioctls * this just covers debug and board ident now */ @@ -2082,9 +2011,8 @@ fst_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) card->card_no, card->state); return -EIO; } - if (copy_from_user(&info, ifr->ifr_data, sizeof (info))) { + if (copy_from_user(&info, ifr->ifr_data, sizeof(info))) return -EFAULT; - } return set_conf_from_info(card, port, &info); @@ -2150,7 +2078,7 @@ fst_openport(struct fst_port_info *port) port->run = 1; signals = FST_RDL(port->card, v24DebouncedSts[port->index]); - if (signals & (((port->hwif == X21) || (port->hwif == X21D)) + if (signals & ((port->hwif == X21 || port->hwif == X21D) ? IPSTS_INDICATE : IPSTS_DCD)) netif_carrier_on(port_to_dev(port)); else @@ -2159,7 +2087,6 @@ fst_openport(struct fst_port_info *port) port->txqe = 0; port->txqs = 0; } - } static void @@ -2185,7 +2112,7 @@ fst_open(struct net_device *dev) port = dev_to_port(dev); if (!try_module_get(THIS_MODULE)) - return -EBUSY; + return -EBUSY; if (port->mode != FST_RAW) { err = hdlc_open(dev); @@ -2220,9 +2147,9 @@ fst_close(struct net_device *dev) netif_stop_queue(dev); fst_closeport(dev_to_port(dev)); - if (port->mode != FST_RAW) { + if (port->mode != FST_RAW) hdlc_close(dev); - } + module_put(THIS_MODULE); return 0; } @@ -2230,8 +2157,7 @@ fst_close(struct net_device *dev) static int fst_attach(struct net_device *dev, unsigned short encoding, unsigned short parity) { - /* - * Setting currently fixed in FarSync card so we check and forget + /* Setting currently fixed in FarSync card so we check and forget */ if (encoding != ENCODING_NRZ || parity != PARITY_CRC16_PR1_CCITT) return -EINVAL; @@ -2289,23 +2215,21 @@ fst_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } - /* - * We are always going to queue the packet + /* We are always going to queue the packet * so that the bottom half is the only place we tx from * Check there is room in the port txq */ spin_lock_irqsave(&card->card_lock, flags); - if ((txq_length = port->txqe - port->txqs) < 0) { - /* - * This is the case where the next free has wrapped but the + txq_length = port->txqe - port->txqs; + if (txq_length < 0) { + /* This is the case where the next free has wrapped but the * last used hasn't */ txq_length = txq_length + FST_TXQ_DEPTH; } spin_unlock_irqrestore(&card->card_lock, flags); if (txq_length > fst_txq_high) { - /* - * We have got enough buffers in the pipeline. Ask the network + /* We have got enough buffers in the pipeline. Ask the network * layer to stop sending frames down */ netif_stop_queue(dev); @@ -2313,8 +2237,7 @@ fst_start_xmit(struct sk_buff *skb, struct net_device *dev) } if (txq_length == FST_TXQ_DEPTH - 1) { - /* - * This shouldn't have happened but such is life + /* This shouldn't have happened but such is life */ dev_kfree_skb(skb); dev->stats.tx_errors++; @@ -2323,8 +2246,7 @@ fst_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } - /* - * queue the buffer + /* queue the buffer */ spin_lock_irqsave(&card->card_lock, flags); port->txq[port->txqe] = skb; @@ -2340,8 +2262,7 @@ fst_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } -/* - * Card setup having checked hardware resources. +/* Card setup having checked hardware resources. * Should be pretty bizarre if we get an error here (kernel memory * exhaustion is one possibility). If we do see a problem we report it * via a printk and leave the corresponding interface and all that follow @@ -2371,7 +2292,7 @@ fst_init_card(struct fst_card_info *card) err = register_hdlc_device(card->ports[i].dev); if (err < 0) { pr_err("Cannot register HDLC device for port %d (errno %d)\n", - i, -err); + i, -err); while (i--) unregister_hdlc_device(card->ports[i].dev); return err; @@ -2393,14 +2314,13 @@ static const struct net_device_ops fst_ops = { .ndo_tx_timeout = fst_tx_timeout, }; -/* - * Initialise card when detected. +/* Initialise card when detected. * Returns 0 to indicate success, or errno otherwise. */ static int fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - static int no_of_cards_added = 0; + static int no_of_cards_added; struct fst_card_info *card; int err = 0; int i; @@ -2411,17 +2331,15 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) #if FST_DEBUG dbg(DBG_ASS, "The value of debug mask is %x\n", fst_debug_mask); #endif - /* - * We are going to be clever and allow certain cards not to be + /* We are going to be clever and allow certain cards not to be * configured. An exclude list can be provided in /etc/modules.conf */ if (fst_excluded_cards != 0) { - /* - * There are cards to exclude + /* There are cards to exclude * */ for (i = 0; i < fst_excluded_cards; i++) { - if ((pdev->devfn) >> 3 == fst_excluded_list[i]) { + if (pdev->devfn >> 3 == fst_excluded_list[i]) { pr_info("FarSync PCI device %d not assigned\n", (pdev->devfn) >> 3); return -EBUSY; @@ -2431,16 +2349,18 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Allocate driver private data */ card = kzalloc(sizeof(struct fst_card_info), GFP_KERNEL); - if (card == NULL) + if (!card) return -ENOMEM; /* Try to enable the device */ - if ((err = pci_enable_device(pdev)) != 0) { + err = pci_enable_device(pdev); + if (err) { pr_err("Failed to enable card. Err %d\n", -err); goto enable_fail; } - if ((err = pci_request_regions(pdev, "FarSync")) !=0) { + err = pci_request_regions(pdev, "FarSync"); + if (err) { pr_err("Failed to allocate regions. Err %d\n", -err); goto regions_fail; } @@ -2449,12 +2369,14 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) card->pci_conf = pci_resource_start(pdev, 1); card->phys_mem = pci_resource_start(pdev, 2); card->phys_ctlmem = pci_resource_start(pdev, 3); - if ((card->mem = ioremap(card->phys_mem, FST_MEMSIZE)) == NULL) { + card->mem = ioremap(card->phys_mem, FST_MEMSIZE); + if (!card->mem) { pr_err("Physical memory remap failed\n"); err = -ENODEV; goto ioremap_physmem_fail; } - if ((card->ctlmem = ioremap(card->phys_ctlmem, 0x10)) == NULL) { + card->ctlmem = ioremap(card->phys_ctlmem, 0x10); + if (!card->ctlmem) { pr_err("Control memory remap failed\n"); err = -ENODEV; goto ioremap_ctlmem_fail; @@ -2474,19 +2396,20 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) card->family = ((ent->driver_data == FST_TYPE_T2P) || (ent->driver_data == FST_TYPE_T4P)) ? FST_FAMILY_TXP : FST_FAMILY_TXU; - if ((ent->driver_data == FST_TYPE_T1U) || - (ent->driver_data == FST_TYPE_TE1)) + if (ent->driver_data == FST_TYPE_T1U || + ent->driver_data == FST_TYPE_TE1) card->nports = 1; else card->nports = ((ent->driver_data == FST_TYPE_T2P) || (ent->driver_data == FST_TYPE_T2U)) ? 2 : 4; card->state = FST_UNINIT; - spin_lock_init ( &card->card_lock ); + spin_lock_init(&card->card_lock); - for ( i = 0 ; i < card->nports ; i++ ) { + for (i = 0; i < card->nports; i++) { struct net_device *dev = alloc_hdlcdev(&card->ports[i]); hdlc_device *hdlc; + if (!dev) { while (i--) free_netdev(card->ports[i].dev); @@ -2495,29 +2418,29 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto hdlcdev_fail; } card->ports[i].dev = dev; - card->ports[i].card = card; - card->ports[i].index = i; - card->ports[i].run = 0; + card->ports[i].card = card; + card->ports[i].index = i; + card->ports[i].run = 0; hdlc = dev_to_hdlc(dev); - /* Fill in the net device info */ + /* Fill in the net device info */ /* Since this is a PCI setup this is purely * informational. Give them the buffer addresses * and basic card I/O. */ - dev->mem_start = card->phys_mem - + BUF_OFFSET ( txBuffer[i][0][0]); - dev->mem_end = card->phys_mem - + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER - 1][LEN_RX_BUFFER - 1]); - dev->base_addr = card->pci_conf; - dev->irq = card->irq; + dev->mem_start = card->phys_mem + + BUF_OFFSET(txBuffer[i][0][0]); + dev->mem_end = card->phys_mem + + BUF_OFFSET(txBuffer[i][NUM_TX_BUFFER - 1][LEN_RX_BUFFER - 1]); + dev->base_addr = card->pci_conf; + dev->irq = card->irq; dev->netdev_ops = &fst_ops; dev->tx_queue_len = FST_TX_QUEUE_LEN; dev->watchdog_timeo = FST_TX_TIMEOUT; - hdlc->attach = fst_attach; - hdlc->xmit = fst_start_xmit; + hdlc->attach = fst_attach; + hdlc->xmit = fst_start_xmit; } card->device = pdev; @@ -2549,13 +2472,12 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (err) goto init_card_fail; if (card->family == FST_FAMILY_TXU) { - /* - * Allocate a dma buffer for transmit and receives + /* Allocate a dma buffer for transmit and receives */ card->rx_dma_handle_host = dma_alloc_coherent(&card->device->dev, FST_MAX_MTU, &card->rx_dma_handle_card, GFP_KERNEL); - if (card->rx_dma_handle_host == NULL) { + if (!card->rx_dma_handle_host) { pr_err("Could not allocate rx dma buffer\n"); err = -ENOMEM; goto rx_dma_fail; @@ -2563,7 +2485,7 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) card->tx_dma_handle_host = dma_alloc_coherent(&card->device->dev, FST_MAX_MTU, &card->tx_dma_handle_card, GFP_KERNEL); - if (card->tx_dma_handle_host == NULL) { + if (!card->tx_dma_handle_host) { pr_err("Could not allocate tx dma buffer\n"); err = -ENOMEM; goto tx_dma_fail; @@ -2598,8 +2520,7 @@ enable_fail: return err; } -/* - * Cleanup and close down a card +/* Cleanup and close down a card */ static void fst_remove_one(struct pci_dev *pdev) @@ -2611,6 +2532,7 @@ fst_remove_one(struct pci_dev *pdev) for (i = 0; i < card->nports; i++) { struct net_device *dev = port_to_dev(&card->ports[i]); + unregister_hdlc_device(dev); } @@ -2621,8 +2543,7 @@ fst_remove_one(struct pci_dev *pdev) iounmap(card->mem); pci_release_regions(pdev); if (card->family == FST_FAMILY_TXU) { - /* - * Free dma buffers + /* Free dma buffers */ dma_free_coherent(&card->device->dev, FST_MAX_MTU, card->rx_dma_handle_host, |