diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/hw.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/hw.h | 135 |
1 files changed, 118 insertions, 17 deletions
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 85cca29375fe..23afcda2de96 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -72,6 +72,18 @@ enum qca6174_chip_id_rev { #define QCA6174_HW_3_0_BOARD_DATA_FILE "board.bin" #define QCA6174_HW_3_0_PATCH_LOAD_ADDR 0x1234 +/* QCA99X0 1.0 definitions (unsupported) */ +#define QCA99X0_HW_1_0_CHIP_ID_REV 0x0 + +/* QCA99X0 2.0 definitions */ +#define QCA99X0_HW_2_0_DEV_VERSION 0x01000000 +#define QCA99X0_HW_2_0_CHIP_ID_REV 0x1 +#define QCA99X0_HW_2_0_FW_DIR ATH10K_FW_DIR "/QCA99X0/hw2.0" +#define QCA99X0_HW_2_0_FW_FILE "firmware.bin" +#define QCA99X0_HW_2_0_OTP_FILE "otp.bin" +#define QCA99X0_HW_2_0_BOARD_DATA_FILE "board.bin" +#define QCA99X0_HW_2_0_PATCH_LOAD_ADDR 0x1234 + #define ATH10K_FW_API2_FILE "firmware-2.bin" #define ATH10K_FW_API3_FILE "firmware-3.bin" @@ -112,6 +124,9 @@ enum ath10k_fw_ie_type { * FW API 5 and above. */ ATH10K_FW_IE_HTT_OP_VERSION = 6, + + /* Code swap image for firmware binary */ + ATH10K_FW_IE_FW_CODE_SWAP_IMAGE = 7, }; enum ath10k_fw_wmi_op_version { @@ -122,6 +137,7 @@ enum ath10k_fw_wmi_op_version { ATH10K_FW_WMI_OP_VERSION_10_2 = 3, ATH10K_FW_WMI_OP_VERSION_TLV = 4, ATH10K_FW_WMI_OP_VERSION_10_2_4 = 5, + ATH10K_FW_WMI_OP_VERSION_10_4 = 6, /* keep last */ ATH10K_FW_WMI_OP_VERSION_MAX, @@ -137,6 +153,8 @@ enum ath10k_fw_htt_op_version { ATH10K_FW_HTT_OP_VERSION_TLV = 3, + ATH10K_FW_HTT_OP_VERSION_10_4 = 4, + /* keep last */ ATH10K_FW_HTT_OP_VERSION_MAX, }; @@ -144,6 +162,7 @@ enum ath10k_fw_htt_op_version { enum ath10k_hw_rev { ATH10K_HW_QCA988X, ATH10K_HW_QCA6174, + ATH10K_HW_QCA99X0, }; struct ath10k_hw_regs { @@ -164,26 +183,50 @@ struct ath10k_hw_regs { u32 soc_reset_control_ce_rst_mask; u32 soc_chip_id_address; u32 scratch_3_address; + u32 fw_indicator_address; + u32 pcie_local_base_address; + u32 ce_wrap_intr_sum_host_msi_lsb; + u32 ce_wrap_intr_sum_host_msi_mask; + u32 pcie_intr_fw_mask; + u32 pcie_intr_ce_mask_all; + u32 pcie_intr_clr_address; }; extern const struct ath10k_hw_regs qca988x_regs; extern const struct ath10k_hw_regs qca6174_regs; +extern const struct ath10k_hw_regs qca99x0_regs; + +struct ath10k_hw_values { + u32 rtc_state_val_on; + u8 ce_count; + u8 msi_assign_ce_max; + u8 num_target_ce_config_wlan; + u16 ce_desc_meta_data_mask; + u8 ce_desc_meta_data_lsb; +}; + +extern const struct ath10k_hw_values qca988x_values; +extern const struct ath10k_hw_values qca6174_values; +extern const struct ath10k_hw_values qca99x0_values; void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev); #define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X) #define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174) +#define QCA_REV_99X0(ar) ((ar)->hw_rev == ATH10K_HW_QCA99X0) /* Known pecularities: - * - current FW doesn't support raw rx mode (last tested v599) - * - current FW dumps upon raw tx mode (last tested v599) * - raw appears in nwifi decap, raw and nwifi appear in ethernet decap * - raw have FCS, nwifi doesn't * - ethernet frames have 802.11 header decapped and parts (base hdr, cipher * param, llc/snap) are aligned to 4byte boundaries each */ enum ath10k_hw_txrx_mode { ATH10K_HW_TXRX_RAW = 0, + + /* Native Wifi decap mode is used to align IP frames to 4-byte + * boundaries and avoid a very expensive re-alignment in mac80211. + */ ATH10K_HW_TXRX_NATIVE_WIFI = 1, ATH10K_HW_TXRX_ETHERNET = 2, @@ -245,10 +288,6 @@ enum ath10k_hw_rate_cck { #define TARGET_RX_TIMEOUT_LO_PRI 100 #define TARGET_RX_TIMEOUT_HI_PRI 40 -/* Native Wifi decap mode is used to align IP frames to 4-byte boundaries and - * avoid a very expensive re-alignment in mac80211. */ -#define TARGET_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI - #define TARGET_SCAN_MAX_PENDING_REQS 4 #define TARGET_BMISS_OFFLOAD_MAX_VDEV 3 #define TARGET_ROAM_OFFLOAD_MAX_VDEV 3 @@ -283,7 +322,6 @@ enum ath10k_hw_rate_cck { #define TARGET_10X_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2)) #define TARGET_10X_RX_TIMEOUT_LO_PRI 100 #define TARGET_10X_RX_TIMEOUT_HI_PRI 40 -#define TARGET_10X_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI #define TARGET_10X_SCAN_MAX_PENDING_REQS 4 #define TARGET_10X_BMISS_OFFLOAD_MAX_VDEV 2 #define TARGET_10X_ROAM_OFFLOAD_MAX_VDEV 2 @@ -310,8 +348,70 @@ enum ath10k_hw_rate_cck { #define TARGET_TLV_NUM_MSDU_DESC (1024 + 32) #define TARGET_TLV_NUM_WOW_PATTERNS 22 +/* Diagnostic Window */ +#define CE_DIAG_PIPE 7 + +#define NUM_TARGET_CE_CONFIG_WLAN ar->hw_values->num_target_ce_config_wlan + +/* Target specific defines for 10.4 firmware */ +#define TARGET_10_4_NUM_VDEVS 16 +#define TARGET_10_4_NUM_STATIONS 32 +#define TARGET_10_4_NUM_PEERS ((TARGET_10_4_NUM_STATIONS) + \ + (TARGET_10_4_NUM_VDEVS)) +#define TARGET_10_4_ACTIVE_PEERS 0 + +#define TARGET_10_4_NUM_QCACHE_PEERS_MAX 512 +#define TARGET_10_4_QCACHE_ACTIVE_PEERS 50 +#define TARGET_10_4_NUM_OFFLOAD_PEERS 0 +#define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS 0 +#define TARGET_10_4_NUM_PEER_KEYS 2 +#define TARGET_10_4_TGT_NUM_TIDS ((TARGET_10_4_NUM_PEERS) * 2) +#define TARGET_10_4_AST_SKID_LIMIT 32 +#define TARGET_10_4_TX_CHAIN_MASK (BIT(0) | BIT(1) | \ + BIT(2) | BIT(3)) +#define TARGET_10_4_RX_CHAIN_MASK (BIT(0) | BIT(1) | \ + BIT(2) | BIT(3)) + +/* 100 ms for video, best-effort, and background */ +#define TARGET_10_4_RX_TIMEOUT_LO_PRI 100 + +/* 40 ms for voice */ +#define TARGET_10_4_RX_TIMEOUT_HI_PRI 40 + +#define TARGET_10_4_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI +#define TARGET_10_4_SCAN_MAX_REQS 4 +#define TARGET_10_4_BMISS_OFFLOAD_MAX_VDEV 3 +#define TARGET_10_4_ROAM_OFFLOAD_MAX_VDEV 3 +#define TARGET_10_4_ROAM_OFFLOAD_MAX_PROFILES 8 + +/* Note: mcast to ucast is disabled by default */ +#define TARGET_10_4_NUM_MCAST_GROUPS 0 +#define TARGET_10_4_NUM_MCAST_TABLE_ELEMS 0 +#define TARGET_10_4_MCAST2UCAST_MODE 0 + +#define TARGET_10_4_TX_DBG_LOG_SIZE 1024 +#define TARGET_10_4_NUM_WDS_ENTRIES 32 +#define TARGET_10_4_DMA_BURST_SIZE 1 +#define TARGET_10_4_MAC_AGGR_DELIM 0 +#define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1 +#define TARGET_10_4_VOW_CONFIG 0 +#define TARGET_10_4_GTK_OFFLOAD_MAX_VDEV 3 +#define TARGET_10_4_NUM_MSDU_DESC (1024 + 400) +#define TARGET_10_4_11AC_TX_MAX_FRAGS 2 +#define TARGET_10_4_MAX_PEER_EXT_STATS 16 +#define TARGET_10_4_SMART_ANT_CAP 0 +#define TARGET_10_4_BK_MIN_FREE 0 +#define TARGET_10_4_BE_MIN_FREE 0 +#define TARGET_10_4_VI_MIN_FREE 0 +#define TARGET_10_4_VO_MIN_FREE 0 +#define TARGET_10_4_RX_BATCH_MODE 1 +#define TARGET_10_4_THERMAL_THROTTLING_CONFIG 0 +#define TARGET_10_4_ATF_CONFIG 0 +#define TARGET_10_4_IPHDR_PAD_CONFIG 1 +#define TARGET_10_4_QWRAP_CONFIG 0 + /* Number of Copy Engines supported */ -#define CE_COUNT 8 +#define CE_COUNT ar->hw_values->ce_count /* * Total number of PCIe MSI interrupts requested for all interrupt sources. @@ -335,10 +435,10 @@ enum ath10k_hw_rate_cck { /* MSIs for Copy Engines */ #define MSI_ASSIGN_CE_INITIAL 1 -#define MSI_ASSIGN_CE_MAX 7 +#define MSI_ASSIGN_CE_MAX ar->hw_values->msi_assign_ce_max /* as of IP3.7.1 */ -#define RTC_STATE_V_ON 3 +#define RTC_STATE_V_ON ar->hw_values->rtc_state_val_on #define RTC_STATE_COLD_RESET_MASK ar->regs->rtc_state_cold_reset_mask #define RTC_STATE_V_LSB 0 @@ -374,7 +474,7 @@ enum ath10k_hw_rate_cck { #define CE7_BASE_ADDRESS ar->regs->ce7_base_address #define DBI_BASE_ADDRESS 0x00060000 #define WLAN_ANALOG_INTF_PCIE_BASE_ADDRESS 0x0006c000 -#define PCIE_LOCAL_BASE_ADDRESS 0x00080000 +#define PCIE_LOCAL_BASE_ADDRESS ar->regs->pcie_local_base_address #define SOC_RESET_CONTROL_ADDRESS 0x00000000 #define SOC_RESET_CONTROL_OFFSET 0x00000000 @@ -448,24 +548,25 @@ enum ath10k_hw_rate_cck { #define CORE_CTRL_ADDRESS 0x0000 #define PCIE_INTR_ENABLE_ADDRESS 0x0008 #define PCIE_INTR_CAUSE_ADDRESS 0x000c -#define PCIE_INTR_CLR_ADDRESS 0x0014 +#define PCIE_INTR_CLR_ADDRESS ar->regs->pcie_intr_clr_address #define SCRATCH_3_ADDRESS ar->regs->scratch_3_address #define CPU_INTR_ADDRESS 0x0010 -/* Cycle counters are running at 88MHz */ -#define CCNT_TO_MSEC(x) ((x) / 88000) +#define CCNT_TO_MSEC(ar, x) ((x) / ar->hw_params.channel_counters_freq_hz) /* Firmware indications to the Host via SCRATCH_3 register. */ -#define FW_INDICATOR_ADDRESS (SOC_CORE_BASE_ADDRESS + SCRATCH_3_ADDRESS) +#define FW_INDICATOR_ADDRESS ar->regs->fw_indicator_address #define FW_IND_EVENT_PENDING 1 #define FW_IND_INITIALIZED 2 /* HOST_REG interrupt from firmware */ -#define PCIE_INTR_FIRMWARE_MASK 0x00000400 -#define PCIE_INTR_CE_MASK_ALL 0x0007f800 +#define PCIE_INTR_FIRMWARE_MASK ar->regs->pcie_intr_fw_mask +#define PCIE_INTR_CE_MASK_ALL ar->regs->pcie_intr_ce_mask_all #define DRAM_BASE_ADDRESS 0x00400000 +#define PCIE_BAR_REG_ADDRESS 0x40030 + #define MISSING 0 #define SYSTEM_SLEEP_OFFSET SOC_SYSTEM_SLEEP_OFFSET |