diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath6kl/target.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath6kl/target.h | 331 |
1 files changed, 331 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath6kl/target.h b/drivers/net/wireless/ath/ath6kl/target.h new file mode 100644 index 000000000000..519a013c9991 --- /dev/null +++ b/drivers/net/wireless/ath/ath6kl/target.h @@ -0,0 +1,331 @@ +/* + * Copyright (c) 2004-2010 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef TARGET_H +#define TARGET_H + +#define AR6003_BOARD_DATA_SZ 1024 +#define AR6003_BOARD_EXT_DATA_SZ 768 + +#define RESET_CONTROL_ADDRESS 0x00000000 +#define RESET_CONTROL_COLD_RST 0x00000100 +#define RESET_CONTROL_MBOX_RST 0x00000004 + +#define CPU_CLOCK_STANDARD_S 0 +#define CPU_CLOCK_STANDARD 0x00000003 +#define CPU_CLOCK_ADDRESS 0x00000020 + +#define CLOCK_CONTROL_ADDRESS 0x00000028 +#define CLOCK_CONTROL_LF_CLK32_S 2 +#define CLOCK_CONTROL_LF_CLK32 0x00000004 + +#define SYSTEM_SLEEP_ADDRESS 0x000000c4 +#define SYSTEM_SLEEP_DISABLE_S 0 +#define SYSTEM_SLEEP_DISABLE 0x00000001 + +#define LPO_CAL_ADDRESS 0x000000e0 +#define LPO_CAL_ENABLE_S 20 +#define LPO_CAL_ENABLE 0x00100000 + +#define GPIO_PIN10_ADDRESS 0x00000050 +#define GPIO_PIN11_ADDRESS 0x00000054 +#define GPIO_PIN12_ADDRESS 0x00000058 +#define GPIO_PIN13_ADDRESS 0x0000005c + +#define HOST_INT_STATUS_ADDRESS 0x00000400 +#define HOST_INT_STATUS_ERROR_S 7 +#define HOST_INT_STATUS_ERROR 0x00000080 + +#define HOST_INT_STATUS_CPU_S 6 +#define HOST_INT_STATUS_CPU 0x00000040 + +#define HOST_INT_STATUS_COUNTER_S 4 +#define HOST_INT_STATUS_COUNTER 0x00000010 + +#define CPU_INT_STATUS_ADDRESS 0x00000401 + +#define ERROR_INT_STATUS_ADDRESS 0x00000402 +#define ERROR_INT_STATUS_WAKEUP_S 2 +#define ERROR_INT_STATUS_WAKEUP 0x00000004 + +#define ERROR_INT_STATUS_RX_UNDERFLOW_S 1 +#define ERROR_INT_STATUS_RX_UNDERFLOW 0x00000002 + +#define ERROR_INT_STATUS_TX_OVERFLOW_S 0 +#define ERROR_INT_STATUS_TX_OVERFLOW 0x00000001 + +#define COUNTER_INT_STATUS_ADDRESS 0x00000403 +#define COUNTER_INT_STATUS_COUNTER_S 0 +#define COUNTER_INT_STATUS_COUNTER 0x000000ff + +#define RX_LOOKAHEAD_VALID_ADDRESS 0x00000405 + +#define INT_STATUS_ENABLE_ADDRESS 0x00000418 +#define INT_STATUS_ENABLE_ERROR_S 7 +#define INT_STATUS_ENABLE_ERROR 0x00000080 + +#define INT_STATUS_ENABLE_CPU_S 6 +#define INT_STATUS_ENABLE_CPU 0x00000040 + +#define INT_STATUS_ENABLE_INT_S 5 +#define INT_STATUS_ENABLE_INT 0x00000020 +#define INT_STATUS_ENABLE_COUNTER_S 4 +#define INT_STATUS_ENABLE_COUNTER 0x00000010 + +#define INT_STATUS_ENABLE_MBOX_DATA_S 0 +#define INT_STATUS_ENABLE_MBOX_DATA 0x0000000f + +#define CPU_INT_STATUS_ENABLE_ADDRESS 0x00000419 +#define CPU_INT_STATUS_ENABLE_BIT_S 0 +#define CPU_INT_STATUS_ENABLE_BIT 0x000000ff + +#define ERROR_STATUS_ENABLE_ADDRESS 0x0000041a +#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_S 1 +#define ERROR_STATUS_ENABLE_RX_UNDERFLOW 0x00000002 + +#define ERROR_STATUS_ENABLE_TX_OVERFLOW_S 0 +#define ERROR_STATUS_ENABLE_TX_OVERFLOW 0x00000001 + +#define COUNTER_INT_STATUS_ENABLE_ADDRESS 0x0000041b +#define COUNTER_INT_STATUS_ENABLE_BIT_S 0 +#define COUNTER_INT_STATUS_ENABLE_BIT 0x000000ff + +#define COUNT_ADDRESS 0x00000420 + +#define COUNT_DEC_ADDRESS 0x00000440 + +#define WINDOW_DATA_ADDRESS 0x00000474 +#define WINDOW_WRITE_ADDR_ADDRESS 0x00000478 +#define WINDOW_READ_ADDR_ADDRESS 0x0000047c +#define CPU_DBG_SEL_ADDRESS 0x00000483 +#define CPU_DBG_ADDRESS 0x00000484 + +#define LOCAL_SCRATCH_ADDRESS 0x000000c0 +#define ATH6KL_OPTION_SLEEP_DISABLE 0x08 + +#define RTC_BASE_ADDRESS 0x00004000 +#define GPIO_BASE_ADDRESS 0x00014000 +#define MBOX_BASE_ADDRESS 0x00018000 +#define ANALOG_INTF_BASE_ADDRESS 0x0001c000 + +/* real name of the register is unknown */ +#define ATH6KL_ANALOG_PLL_REGISTER (ANALOG_INTF_BASE_ADDRESS + 0x284) + +#define SM(f, v) (((v) << f##_S) & f) +#define MS(f, v) (((v) & f) >> f##_S) + +/* + * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the + * host_interest structure. + * + * Host Interest is shared between Host and Target in order to coordinate + * between the two, and is intended to remain constant (with additions only + * at the end). + */ +#define ATH6KL_HI_START_ADDR 0x00540600 + +/* + * These are items that the Host may need to access + * via BMI or via the Diagnostic Window. The position + * of items in this structure must remain constant. + * across firmware revisions! + * + * Types for each item must be fixed size across target and host platforms. + * The structure is used only to calculate offset for each register with + * HI_ITEM() macro, no values are stored to it. + * + * More items may be added at the end. + */ +struct host_interest { + /* + * Pointer to application-defined area, if any. + * Set by Target application during startup. + */ + u32 hi_app_host_interest; /* 0x00 */ + + /* Pointer to register dump area, valid after Target crash. */ + u32 hi_failure_state; /* 0x04 */ + + /* Pointer to debug logging header */ + u32 hi_dbglog_hdr; /* 0x08 */ + + u32 hi_unused1; /* 0x0c */ + + /* + * General-purpose flag bits, similar to ATH6KL_OPTION_* flags. + * Can be used by application rather than by OS. + */ + u32 hi_option_flag; /* 0x10 */ + + /* + * Boolean that determines whether or not to + * display messages on the serial port. + */ + u32 hi_serial_enable; /* 0x14 */ + + /* Start address of DataSet index, if any */ + u32 hi_dset_list_head; /* 0x18 */ + + /* Override Target application start address */ + u32 hi_app_start; /* 0x1c */ + + /* Clock and voltage tuning */ + u32 hi_skip_clock_init; /* 0x20 */ + u32 hi_core_clock_setting; /* 0x24 */ + u32 hi_cpu_clock_setting; /* 0x28 */ + u32 hi_system_sleep_setting; /* 0x2c */ + u32 hi_xtal_control_setting; /* 0x30 */ + u32 hi_pll_ctrl_setting_24ghz; /* 0x34 */ + u32 hi_pll_ctrl_setting_5ghz; /* 0x38 */ + u32 hi_ref_voltage_trim_setting; /* 0x3c */ + u32 hi_clock_info; /* 0x40 */ + + /* + * Flash configuration overrides, used only + * when firmware is not executing from flash. + * (When using flash, modify the global variables + * with equivalent names.) + */ + u32 hi_bank0_addr_value; /* 0x44 */ + u32 hi_bank0_read_value; /* 0x48 */ + u32 hi_bank0_write_value; /* 0x4c */ + u32 hi_bank0_config_value; /* 0x50 */ + + /* Pointer to Board Data */ + u32 hi_board_data; /* 0x54 */ + u32 hi_board_data_initialized; /* 0x58 */ + + u32 hi_dset_ram_index_tbl; /* 0x5c */ + + u32 hi_desired_baud_rate; /* 0x60 */ + u32 hi_dbglog_config; /* 0x64 */ + u32 hi_end_ram_reserve_sz; /* 0x68 */ + u32 hi_mbox_io_block_sz; /* 0x6c */ + + u32 hi_num_bpatch_streams; /* 0x70 -- unused */ + u32 hi_mbox_isr_yield_limit; /* 0x74 */ + + u32 hi_refclk_hz; /* 0x78 */ + u32 hi_ext_clk_detected; /* 0x7c */ + u32 hi_dbg_uart_txpin; /* 0x80 */ + u32 hi_dbg_uart_rxpin; /* 0x84 */ + u32 hi_hci_uart_baud; /* 0x88 */ + u32 hi_hci_uart_pin_assignments; /* 0x8C */ + /* + * NOTE: byte [0] = tx pin, [1] = rx pin, [2] = rts pin, [3] = cts + * pin + */ + u32 hi_hci_uart_baud_scale_val; /* 0x90 */ + u32 hi_hci_uart_baud_step_val; /* 0x94 */ + + u32 hi_allocram_start; /* 0x98 */ + u32 hi_allocram_sz; /* 0x9c */ + u32 hi_hci_bridge_flags; /* 0xa0 */ + u32 hi_hci_uart_support_pins; /* 0xa4 */ + /* + * NOTE: byte [0] = RESET pin (bit 7 is polarity), + * bytes[1]..bytes[3] are for future use + */ + u32 hi_hci_uart_pwr_mgmt_params; /* 0xa8 */ + /* + * 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high + * [31:16]: wakeup timeout in ms + */ + + /* Pointer to extended board data */ + u32 hi_board_ext_data; /* 0xac */ + u32 hi_board_ext_data_config; /* 0xb0 */ + + /* + * Bit [0] : valid + * Bit[31:16: size + */ + /* + * hi_reset_flag is used to do some stuff when target reset. + * such as restore app_start after warm reset or + * preserve host Interest area, or preserve ROM data, literals etc. + */ + u32 hi_reset_flag; /* 0xb4 */ + /* indicate hi_reset_flag is valid */ + u32 hi_reset_flag_valid; /* 0xb8 */ + u32 hi_hci_uart_pwr_mgmt_params_ext; /* 0xbc */ + /* + * 0xbc - [31:0]: idle timeout in ms + */ + /* ACS flags */ + u32 hi_acs_flags; /* 0xc0 */ + u32 hi_console_flags; /* 0xc4 */ + u32 hi_nvram_state; /* 0xc8 */ + u32 hi_option_flag2; /* 0xcc */ + + /* If non-zero, override values sent to Host in WMI_READY event. */ + u32 hi_sw_version_override; /* 0xd0 */ + u32 hi_abi_version_override; /* 0xd4 */ + + /* + * Percentage of high priority RX traffic to total expected RX traffic - + * applicable only to ar6004 + */ + u32 hi_hp_rx_traffic_ratio; /* 0xd8 */ + + /* test applications flags */ + u32 hi_test_apps_related ; /* 0xdc */ + /* location of test script */ + u32 hi_ota_testscript; /* 0xe0 */ + /* location of CAL data */ + u32 hi_cal_data; /* 0xe4 */ + /* Number of packet log buffers */ + u32 hi_pktlog_num_buffers; /* 0xe8 */ + +} __packed; + +#define HI_ITEM(item) offsetof(struct host_interest, item) + +#define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3 + +#define HI_OPTION_FW_MODE_IBSS 0x0 +#define HI_OPTION_FW_MODE_BSS_STA 0x1 +#define HI_OPTION_FW_MODE_AP 0x2 + +#define HI_OPTION_NUM_DEV_SHIFT 0x9 + +#define HI_OPTION_FW_BRIDGE_SHIFT 0x04 + +/* Fw Mode/SubMode Mask +|------------------------------------------------------------------------------| +| SUB | SUB | SUB | SUB | | | | +| MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0| +| (2) | (2) | (2) | (2) | (2) | (2) | (2) | (2) +|------------------------------------------------------------------------------| +*/ +#define HI_OPTION_FW_MODE_SHIFT 0xC + +/* Convert a Target virtual address into a Target physical address */ +#define TARG_VTOP(vaddr) (vaddr & 0x001fffff) + +#define AR6003_REV2_APP_START_OVERRIDE 0x944C00 +#define AR6003_REV2_APP_LOAD_ADDRESS 0x543180 +#define AR6003_REV2_BOARD_EXT_DATA_ADDRESS 0x57E500 +#define AR6003_REV2_DATASET_PATCH_ADDRESS 0x57e884 +#define AR6003_REV2_RAM_RESERVE_SIZE 6912 + +#define AR6003_REV3_APP_START_OVERRIDE 0x945d00 +#define AR6003_REV3_APP_LOAD_ADDRESS 0x545000 +#define AR6003_REV3_BOARD_EXT_DATA_ADDRESS 0x542330 +#define AR6003_REV3_DATASET_PATCH_ADDRESS 0x57FF74 +#define AR6003_REV3_RAM_RESERVE_SIZE 512 + +#endif |