summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/recv.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/recv.c')
-rw-r--r--drivers/net/wireless/ath/ath9k/recv.c284
1 files changed, 4 insertions, 280 deletions
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 8b7489d61d38..477365e5ae69 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -89,282 +89,6 @@ static void ath_setdefantenna(struct ath_softc *sc, u32 antenna)
sc->rx.rxotherant = 0;
}
-/* Assumes you've already done the endian to CPU conversion */
-static bool ath9k_rx_accept(struct ath_common *common,
- struct sk_buff *skb,
- struct ieee80211_rx_status *rxs,
- struct ath_rx_status *rx_stats,
- bool *decrypt_error)
-{
- struct ath_hw *ah = common->ah;
- struct ieee80211_hdr *hdr;
- __le16 fc;
-
- hdr = (struct ieee80211_hdr *) skb->data;
- fc = hdr->frame_control;
-
- if (!rx_stats->rs_datalen)
- return false;
- /*
- * rs_status follows rs_datalen so if rs_datalen is too large
- * we can take a hint that hardware corrupted it, so ignore
- * those frames.
- */
- if (rx_stats->rs_datalen > common->rx_bufsize)
- return false;
-
- if (rx_stats->rs_more) {
- /*
- * Frame spans multiple descriptors; this cannot happen yet
- * as we don't support jumbograms. If not in monitor mode,
- * discard the frame. Enable this if you want to see
- * error frames in Monitor mode.
- */
- if (ah->opmode != NL80211_IFTYPE_MONITOR)
- return false;
- } else if (rx_stats->rs_status != 0) {
- if (rx_stats->rs_status & ATH9K_RXERR_CRC)
- rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
- if (rx_stats->rs_status & ATH9K_RXERR_PHY)
- return false;
-
- if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
- *decrypt_error = true;
- } else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
- if (ieee80211_is_ctl(fc))
- /*
- * Sometimes, we get invalid
- * MIC failures on valid control frames.
- * Remove these mic errors.
- */
- rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
- else
- rxs->flag |= RX_FLAG_MMIC_ERROR;
- }
- /*
- * Reject error frames with the exception of
- * decryption and MIC failures. For monitor mode,
- * we also ignore the CRC error.
- */
- if (ah->opmode == NL80211_IFTYPE_MONITOR) {
- if (rx_stats->rs_status &
- ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
- ATH9K_RXERR_CRC))
- return false;
- } else {
- if (rx_stats->rs_status &
- ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
- return false;
- }
- }
- }
- return true;
-}
-
-static u8 ath9k_process_rate(struct ath_common *common,
- struct ieee80211_hw *hw,
- struct ath_rx_status *rx_stats,
- struct ieee80211_rx_status *rxs,
- struct sk_buff *skb)
-{
- struct ieee80211_supported_band *sband;
- enum ieee80211_band band;
- unsigned int i = 0;
-
- band = hw->conf.channel->band;
- sband = hw->wiphy->bands[band];
-
- if (rx_stats->rs_rate & 0x80) {
- /* HT rate */
- rxs->flag |= RX_FLAG_HT;
- if (rx_stats->rs_flags & ATH9K_RX_2040)
- rxs->flag |= RX_FLAG_40MHZ;
- if (rx_stats->rs_flags & ATH9K_RX_GI)
- rxs->flag |= RX_FLAG_SHORT_GI;
- return rx_stats->rs_rate & 0x7f;
- }
-
- for (i = 0; i < sband->n_bitrates; i++) {
- if (sband->bitrates[i].hw_value == rx_stats->rs_rate)
- return i;
- if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) {
- rxs->flag |= RX_FLAG_SHORTPRE;
- return i;
- }
- }
-
- /* No valid hardware bitrate found -- we should not get here */
- ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected "
- "0x%02x using 1 Mbit\n", rx_stats->rs_rate);
- if ((common->debug_mask & ATH_DBG_XMIT))
- print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len);
-
- return 0;
-}
-
-/*
- * Theory for reporting quality:
- *
- * At a hardware RSSI of 45 you will be able to use MCS 7 reliably.
- * At a hardware RSSI of 45 you will be able to use MCS 15 reliably.
- * At a hardware RSSI of 35 you should be able use 54 Mbps reliably.
- *
- * MCS 7 is the highets MCS index usable by a 1-stream device.
- * MCS 15 is the highest MCS index usable by a 2-stream device.
- *
- * All ath9k devices are either 1-stream or 2-stream.
- *
- * How many bars you see is derived from the qual reporting.
- *
- * A more elaborate scheme can be used here but it requires tables
- * of SNR/throughput for each possible mode used. For the MCS table
- * you can refer to the wireless wiki:
- *
- * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
- *
- */
-static int ath9k_compute_qual(struct ieee80211_hw *hw,
- struct ath_rx_status *rx_stats)
-{
- int qual;
-
- if (conf_is_ht(&hw->conf))
- qual = rx_stats->rs_rssi * 100 / 45;
- else
- qual = rx_stats->rs_rssi * 100 / 35;
-
- /*
- * rssi can be more than 45 though, anything above that
- * should be considered at 100%
- */
- if (qual > 100)
- qual = 100;
-
- return qual;
-}
-
-static void ath9k_process_rssi(struct ath_common *common,
- struct ieee80211_hw *hw,
- struct sk_buff *skb,
- struct ath_rx_status *rx_stats)
-{
- struct ath_hw *ah = common->ah;
- struct ieee80211_sta *sta;
- struct ieee80211_hdr *hdr;
- struct ath_node *an;
- int last_rssi = ATH_RSSI_DUMMY_MARKER;
- __le16 fc;
-
- hdr = (struct ieee80211_hdr *)skb->data;
- fc = hdr->frame_control;
-
- rcu_read_lock();
- /* XXX: use ieee80211_find_sta! */
- sta = ieee80211_find_sta_by_hw(hw, hdr->addr2);
- if (sta) {
- an = (struct ath_node *) sta->drv_priv;
- if (rx_stats->rs_rssi != ATH9K_RSSI_BAD &&
- !rx_stats->rs_moreaggr)
- ATH_RSSI_LPF(an->last_rssi, rx_stats->rs_rssi);
- last_rssi = an->last_rssi;
- }
- rcu_read_unlock();
-
- if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
- rx_stats->rs_rssi = ATH_EP_RND(last_rssi,
- ATH_RSSI_EP_MULTIPLIER);
- if (rx_stats->rs_rssi < 0)
- rx_stats->rs_rssi = 0;
- else if (rx_stats->rs_rssi > 127)
- rx_stats->rs_rssi = 127;
-
- /* Update Beacon RSSI, this is used by ANI. */
- if (ieee80211_is_beacon(fc))
- ah->stats.avgbrssi = rx_stats->rs_rssi;
-}
-
-/*
- * For Decrypt or Demic errors, we only mark packet status here and always push
- * up the frame up to let mac80211 handle the actual error case, be it no
- * decryption key or real decryption error. This let us keep statistics there.
- */
-static int ath9k_rx_skb_preprocess(struct ath_common *common,
- struct ieee80211_hw *hw,
- struct sk_buff *skb,
- struct ath_rx_status *rx_stats,
- struct ieee80211_rx_status *rx_status,
- bool *decrypt_error)
-{
- struct ath_hw *ah = common->ah;
-
- if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error))
- return -EINVAL;
-
- ath9k_process_rssi(common, hw, skb, rx_stats);
-
- rx_status->rate_idx = ath9k_process_rate(common, hw,
- rx_stats, rx_status, skb);
- rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp);
- rx_status->band = hw->conf.channel->band;
- rx_status->freq = hw->conf.channel->center_freq;
- rx_status->noise = common->ani.noise_floor;
- rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi;
- rx_status->antenna = rx_stats->rs_antenna;
- rx_status->qual = ath9k_compute_qual(hw, rx_stats);
- rx_status->flag |= RX_FLAG_TSFT;
-
- return 0;
-}
-
-static void ath9k_rx_skb_postprocess(struct ath_common *common,
- struct sk_buff *skb,
- struct ath_rx_status *rx_stats,
- struct ieee80211_rx_status *rxs,
- bool decrypt_error)
-{
- struct ath_hw *ah = common->ah;
- struct ieee80211_hdr *hdr;
- int hdrlen, padsize;
- u8 keyix;
- __le16 fc;
-
- /* see if any padding is done by the hw and remove it */
- hdr = (struct ieee80211_hdr *) skb->data;
- hdrlen = ieee80211_get_hdrlen_from_skb(skb);
- fc = hdr->frame_control;
-
- /* The MAC header is padded to have 32-bit boundary if the
- * packet payload is non-zero. The general calculation for
- * padsize would take into account odd header lengths:
- * padsize = (4 - hdrlen % 4) % 4; However, since only
- * even-length headers are used, padding can only be 0 or 2
- * bytes and we can optimize this a bit. In addition, we must
- * not try to remove padding from short control frames that do
- * not have payload. */
- padsize = hdrlen & 3;
- if (padsize && hdrlen >= 24) {
- memmove(skb->data + padsize, skb->data, hdrlen);
- skb_pull(skb, padsize);
- }
-
- keyix = rx_stats->rs_keyix;
-
- if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) {
- rxs->flag |= RX_FLAG_DECRYPTED;
- } else if (ieee80211_has_protected(fc)
- && !decrypt_error && skb->len >= hdrlen + 4) {
- keyix = skb->data[hdrlen + 3] >> 6;
-
- if (test_bit(keyix, common->keymap))
- rxs->flag |= RX_FLAG_DECRYPTED;
- }
- if (ah->sw_mgmt_crypto &&
- (rxs->flag & RX_FLAG_DECRYPTED) &&
- ieee80211_is_mgmt(fc))
- /* Use software decrypt for management frames. */
- rxs->flag &= ~RX_FLAG_DECRYPTED;
-}
-
static void ath_opmode_init(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
@@ -854,8 +578,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
if (flush)
goto requeue;
- retval = ath9k_rx_skb_preprocess(common, hw, skb, rx_stats,
- rxs, &decrypt_error);
+ retval = ath9k_cmn_rx_skb_preprocess(common, hw, skb, rx_stats,
+ rxs, &decrypt_error);
if (retval)
goto requeue;
@@ -877,8 +601,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
skb_put(skb, rx_stats->rs_datalen);
- ath9k_rx_skb_postprocess(common, skb, rx_stats,
- rxs, decrypt_error);
+ ath9k_cmn_rx_skb_postprocess(common, skb, rx_stats,
+ rxs, decrypt_error);
/* We will now give hardware our shiny new allocated skb */
bf->bf_mpdu = requeue_skb;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 19:41:49 +0100