diff options
Diffstat (limited to 'drivers/net/wireless/ath9k/main.c')
| -rw-r--r-- | drivers/net/wireless/ath9k/main.c | 1533 |
1 files changed, 1533 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c new file mode 100644 index 000000000000..9549524630f7 --- /dev/null +++ b/drivers/net/wireless/ath9k/main.c @@ -0,0 +1,1533 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* mac80211 and PCI callbacks */ + +#include <linux/nl80211.h> +#include "core.h" + +#define ATH_PCI_VERSION "0.1" + +#define IEEE80211_HTCAP_MAXRXAMPDU_FACTOR 13 +#define IEEE80211_ACTION_CAT_HT 7 +#define IEEE80211_ACTION_HT_TXCHWIDTH 0 + +static char *dev_info = "ath9k"; + +MODULE_AUTHOR("Atheros Communications"); +MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards."); +MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards"); +MODULE_LICENSE("Dual BSD/GPL"); + +static struct pci_device_id ath_pci_id_table[] __devinitdata = { + { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */ + { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */ + { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */ + { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ + { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ + { 0 } +}; + +static int ath_get_channel(struct ath_softc *sc, + struct ieee80211_channel *chan) +{ + int i; + + for (i = 0; i < sc->sc_ah->ah_nchan; i++) { + if (sc->sc_ah->ah_channels[i].channel == chan->center_freq) + return i; + } + + return -1; +} + +static u32 ath_get_extchanmode(struct ath_softc *sc, + struct ieee80211_channel *chan) +{ + u32 chanmode = 0; + u8 ext_chan_offset = sc->sc_ht_info.ext_chan_offset; + enum ath9k_ht_macmode tx_chan_width = sc->sc_ht_info.tx_chan_width; + + switch (chan->band) { + case IEEE80211_BAND_2GHZ: + if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) && + (tx_chan_width == ATH9K_HT_MACMODE_20)) + chanmode = CHANNEL_G_HT20; + if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) && + (tx_chan_width == ATH9K_HT_MACMODE_2040)) + chanmode = CHANNEL_G_HT40PLUS; + if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) && + (tx_chan_width == ATH9K_HT_MACMODE_2040)) + chanmode = CHANNEL_G_HT40MINUS; + break; + case IEEE80211_BAND_5GHZ: + if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) && + (tx_chan_width == ATH9K_HT_MACMODE_20)) + chanmode = CHANNEL_A_HT20; + if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) && + (tx_chan_width == ATH9K_HT_MACMODE_2040)) + chanmode = CHANNEL_A_HT40PLUS; + if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) && + (tx_chan_width == ATH9K_HT_MACMODE_2040)) + chanmode = CHANNEL_A_HT40MINUS; + break; + default: + break; + } + + return chanmode; +} + + +static int ath_setkey_tkip(struct ath_softc *sc, + struct ieee80211_key_conf *key, + struct ath9k_keyval *hk, + const u8 *addr) +{ + u8 *key_rxmic = NULL; + u8 *key_txmic = NULL; + + key_txmic = key->key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY; + key_rxmic = key->key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY; + + if (addr == NULL) { + /* Group key installation */ + memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); + return ath_keyset(sc, key->keyidx, hk, addr); + } + if (!sc->sc_splitmic) { + /* + * data key goes at first index, + * the hal handles the MIC keys at index+64. + */ + memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); + memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic)); + return ath_keyset(sc, key->keyidx, hk, addr); + } + /* + * TX key goes at first index, RX key at +32. + * The hal handles the MIC keys at index+64. + */ + memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic)); + if (!ath_keyset(sc, key->keyidx, hk, NULL)) { + /* Txmic entry failed. No need to proceed further */ + DPRINTF(sc, ATH_DBG_KEYCACHE, + "%s Setting TX MIC Key Failed\n", __func__); + return 0; + } + + memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); + /* XXX delete tx key on failure? */ + return ath_keyset(sc, key->keyidx+32, hk, addr); +} + +static int ath_key_config(struct ath_softc *sc, + const u8 *addr, + struct ieee80211_key_conf *key) +{ + struct ieee80211_vif *vif; + struct ath9k_keyval hk; + const u8 *mac = NULL; + int ret = 0; + enum ieee80211_if_types opmode; + + memset(&hk, 0, sizeof(hk)); + + switch (key->alg) { + case ALG_WEP: + hk.kv_type = ATH9K_CIPHER_WEP; + break; + case ALG_TKIP: + hk.kv_type = ATH9K_CIPHER_TKIP; + break; + case ALG_CCMP: + hk.kv_type = ATH9K_CIPHER_AES_CCM; + break; + default: + return -EINVAL; + } + + hk.kv_len = key->keylen; + memcpy(hk.kv_val, key->key, key->keylen); + + if (!sc->sc_vaps[0]) + return -EIO; + + vif = sc->sc_vaps[0]->av_if_data; + opmode = vif->type; + + /* + * Strategy: + * For _M_STA mc tx, we will not setup a key at all since we never + * tx mc. + * _M_STA mc rx, we will use the keyID. + * for _M_IBSS mc tx, we will use the keyID, and no macaddr. + * for _M_IBSS mc rx, we will alloc a slot and plumb the mac of the + * peer node. BUT we will plumb a cleartext key so that we can do + * perSta default key table lookup in software. + */ + if (is_broadcast_ether_addr(addr)) { + switch (opmode) { + case IEEE80211_IF_TYPE_STA: + /* default key: could be group WPA key + * or could be static WEP key */ + mac = NULL; + break; + case IEEE80211_IF_TYPE_IBSS: + break; + case IEEE80211_IF_TYPE_AP: + break; + default: + ASSERT(0); + break; + } + } else { + mac = addr; + } + + if (key->alg == ALG_TKIP) + ret = ath_setkey_tkip(sc, key, &hk, mac); + else + ret = ath_keyset(sc, key->keyidx, &hk, mac); + + if (!ret) + return -EIO; + + sc->sc_keytype = hk.kv_type; + return 0; +} + +static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key) +{ +#define ATH_MAX_NUM_KEYS 4 + int freeslot; + + freeslot = (key->keyidx >= ATH_MAX_NUM_KEYS) ? 1 : 0; + ath_key_reset(sc, key->keyidx, freeslot); +#undef ATH_MAX_NUM_KEYS +} + +static void setup_ht_cap(struct ieee80211_ht_info *ht_info) +{ +/* Until mac80211 includes these fields */ + +#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 +#define IEEE80211_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */ +#define IEEE80211_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */ + + ht_info->ht_supported = 1; + ht_info->cap = (u16)IEEE80211_HT_CAP_SUP_WIDTH + |(u16)IEEE80211_HT_CAP_MIMO_PS + |(u16)IEEE80211_HT_CAP_SGI_40 + |(u16)IEEE80211_HT_CAP_DSSSCCK40; + + ht_info->ampdu_factor = IEEE80211_HT_CAP_MAXRXAMPDU_65536; + ht_info->ampdu_density = IEEE80211_HT_CAP_MPDUDENSITY_8; + /* setup supported mcs set */ + memset(ht_info->supp_mcs_set, 0, 16); + ht_info->supp_mcs_set[0] = 0xff; + ht_info->supp_mcs_set[1] = 0xff; + ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED; +} + +static int ath_rate2idx(struct ath_softc *sc, int rate) +{ + int i = 0, cur_band, n_rates; + struct ieee80211_hw *hw = sc->hw; + + cur_band = hw->conf.channel->band; + n_rates = sc->sbands[cur_band].n_bitrates; + + for (i = 0; i < n_rates; i++) { + if (sc->sbands[cur_band].bitrates[i].bitrate == rate) + break; + } + + /* + * NB:mac80211 validates rx rate index against the supported legacy rate + * index only (should be done against ht rates also), return the highest + * legacy rate index for rx rate which does not match any one of the + * supported basic and extended rates to make mac80211 happy. + * The following hack will be cleaned up once the issue with + * the rx rate index validation in mac80211 is fixed. + */ + if (i == n_rates) + return n_rates - 1; + return i; +} + +static void ath9k_rx_prepare(struct ath_softc *sc, + struct sk_buff *skb, + struct ath_recv_status *status, + struct ieee80211_rx_status *rx_status) +{ + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_channel *curchan = hw->conf.channel; + + memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); + + rx_status->mactime = status->tsf; + rx_status->band = curchan->band; + rx_status->freq = curchan->center_freq; + rx_status->noise = ATH_DEFAULT_NOISE_FLOOR; + rx_status->signal = rx_status->noise + status->rssi; + rx_status->rate_idx = ath_rate2idx(sc, (status->rateKbps / 100)); + rx_status->antenna = status->antenna; + rx_status->qual = status->rssi * 100 / 64; + + if (status->flags & ATH_RX_MIC_ERROR) + rx_status->flag |= RX_FLAG_MMIC_ERROR; + if (status->flags & ATH_RX_FCS_ERROR) + rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; + + rx_status->flag |= RX_FLAG_TSFT; +} + +static u8 parse_mpdudensity(u8 mpdudensity) +{ + /* + * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": + * 0 for no restriction + * 1 for 1/4 us + * 2 for 1/2 us + * 3 for 1 us + * 4 for 2 us + * 5 for 4 us + * 6 for 8 us + * 7 for 16 us + */ + switch (mpdudensity) { + case 0: + return 0; + case 1: + case 2: + case 3: + /* Our lower layer calculations limit our precision to + 1 microsecond */ + return 1; + case 4: + return 2; + case 5: + return 4; + case 6: + return 8; + case 7: + return 16; + default: + return 0; + } +} + +static int ath9k_start(struct ieee80211_hw *hw) +{ + struct ath_softc *sc = hw->priv; + struct ieee80211_channel *curchan = hw->conf.channel; + int error = 0, pos; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with " + "initial channel: %d MHz\n", __func__, curchan->center_freq); + + /* setup initial channel */ + + pos = ath_get_channel(sc, curchan); + if (pos == -1) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); + return -EINVAL; + } + + sc->sc_ah->ah_channels[pos].chanmode = + (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; + + /* open ath_dev */ + error = ath_open(sc, &sc->sc_ah->ah_channels[pos]); + if (error) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to complete ath_open\n", __func__); + return error; + } + + ieee80211_wake_queues(hw); + return 0; +} + +static int ath9k_tx(struct ieee80211_hw *hw, + struct sk_buff *skb) +{ + struct ath_softc *sc = hw->priv; + int hdrlen, padsize; + + /* Add the padding after the header if this is not already done */ + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + if (hdrlen & 3) { + padsize = hdrlen % 4; + if (skb_headroom(skb) < padsize) + return -1; + skb_push(skb, padsize); + memmove(skb->data, skb->data + padsize, hdrlen); + } + + DPRINTF(sc, ATH_DBG_XMIT, "%s: transmitting packet, skb: %p\n", + __func__, + skb); + + if (ath_tx_start(sc, skb) != 0) { + DPRINTF(sc, ATH_DBG_XMIT, "%s: TX failed\n", __func__); + dev_kfree_skb_any(skb); + /* FIXME: Check for proper return value from ATH_DEV */ + return 0; + } + + return 0; +} + +static void ath9k_stop(struct ieee80211_hw *hw) +{ + struct ath_softc *sc = hw->priv; + int error; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__); + + error = ath_suspend(sc); + if (error) + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: Device is no longer present\n", __func__); + + ieee80211_stop_queues(hw); +} + +static int ath9k_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct ath_softc *sc = hw->priv; + int error, ic_opmode = 0; + + /* Support only vap for now */ + + if (sc->sc_nvaps) + return -ENOBUFS; + + switch (conf->type) { + case IEEE80211_IF_TYPE_STA: + ic_opmode = ATH9K_M_STA; + break; + case IEEE80211_IF_TYPE_IBSS: + ic_opmode = ATH9K_M_IBSS; + break; + default: + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Only STA and IBSS are supported currently\n", + __func__); + return -EOPNOTSUPP; + } + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a VAP of type: %d\n", + __func__, + ic_opmode); + + error = ath_vap_attach(sc, 0, conf->vif, ic_opmode); + if (error) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to attach vap, error: %d\n", + __func__, error); + return error; + } + + return 0; +} + +static void ath9k_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct ath_softc *sc = hw->priv; + struct ath_vap *avp; + int error; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach VAP\n", __func__); + + avp = sc->sc_vaps[0]; + if (avp == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", + __func__); + return; + } + +#ifdef CONFIG_SLOW_ANT_DIV + ath_slow_ant_div_stop(&sc->sc_antdiv); +#endif + + /* Update ratectrl */ + ath_rate_newstate(sc, avp); + + /* Reclaim beacon resources */ + if (sc->sc_opmode == ATH9K_M_HOSTAP || sc->sc_opmode == ATH9K_M_IBSS) { + ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); + ath_beacon_return(sc, avp); + } + + /* Set interrupt mask */ + sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask & ~ATH9K_INT_GLOBAL); + sc->sc_beacons = 0; + + error = ath_vap_detach(sc, 0); + if (error) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to detach vap, error: %d\n", + __func__, error); +} + +static int ath9k_config(struct ieee80211_hw *hw, + struct ieee80211_conf *conf) +{ + struct ath_softc *sc = hw->priv; + struct ieee80211_channel *curchan = hw->conf.channel; + int pos; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", + __func__, + curchan->center_freq); + + pos = ath_get_channel(sc, curchan); + if (pos == -1) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); + return -EINVAL; + } + + sc->sc_ah->ah_channels[pos].chanmode = + (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; + sc->sc_config.txpowlimit = 2 * conf->power_level; + + /* set h/w channel */ + if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) + DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to set channel\n", + __func__); + + return 0; +} + +static int ath9k_config_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) +{ + struct ath_softc *sc = hw->priv; + struct ath_vap *avp; + u32 rfilt = 0; + int error, i; + DECLARE_MAC_BUF(mac); + + avp = sc->sc_vaps[0]; + if (avp == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", + __func__); + return -EINVAL; + } + + if ((conf->changed & IEEE80211_IFCC_BSSID) && + !is_zero_ether_addr(conf->bssid)) { + switch (vif->type) { + case IEEE80211_IF_TYPE_STA: + case IEEE80211_IF_TYPE_IBSS: + /* Update ratectrl about the new state */ + ath_rate_newstate(sc, avp); + + /* Set rx filter */ + rfilt = ath_calcrxfilter(sc); + ath9k_hw_setrxfilter(sc->sc_ah, rfilt); + + /* Set BSSID */ + memcpy(sc->sc_curbssid, conf->bssid, ETH_ALEN); + sc->sc_curaid = 0; + ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid, + sc->sc_curaid); + + /* Set aggregation protection mode parameters */ + sc->sc_config.ath_aggr_prot = 0; + + /* + * Reset our TSF so that its value is lower than the + * beacon that we are trying to catch. + * Only then hw will update its TSF register with the + * new beacon. Reset the TSF before setting the BSSID + * to avoid allowing in any frames that would update + * our TSF only to have us clear it + * immediately thereafter. + */ + ath9k_hw_reset_tsf(sc->sc_ah); + + /* Disable BMISS interrupt when we're not associated */ + ath9k_hw_set_interrupts(sc->sc_ah, + sc->sc_imask & + ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS)); + sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: RX filter 0x%x bssid %s aid 0x%x\n", + __func__, rfilt, + print_mac(mac, sc->sc_curbssid), sc->sc_curaid); + + /* need to reconfigure the beacon */ + sc->sc_beacons = 0; + + break; + default: + break; + } + } + + if ((conf->changed & IEEE80211_IFCC_BEACON) && + (vif->type == IEEE80211_IF_TYPE_IBSS)) { + /* + * Allocate and setup the beacon frame. + * + * Stop any previous beacon DMA. This may be + * necessary, for example, when an ibss merge + * causes reconfiguration; we may be called + * with beacon transmission active. + */ + ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); + + error = ath_beacon_alloc(sc, 0); + if (error != 0) + return error; + + ath_beacon_sync(sc, 0); + } + + /* Check for WLAN_CAPABILITY_PRIVACY ? */ + if ((avp->av_opmode != IEEE80211_IF_TYPE_STA)) { + for (i = 0; i < IEEE80211_WEP_NKID; i++) + if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i)) + ath9k_hw_keysetmac(sc->sc_ah, + (u16)i, + sc->sc_curbssid); + } + + /* Only legacy IBSS for now */ + if (vif->type == IEEE80211_IF_TYPE_IBSS) + ath_update_chainmask(sc, 0); + + return 0; +} + +#define SUPPORTED_FILTERS \ + (FIF_PROMISC_IN_BSS | \ + FIF_ALLMULTI | \ + FIF_CONTROL | \ + FIF_OTHER_BSS | \ + FIF_BCN_PRBRESP_PROMISC | \ + FIF_FCSFAIL) + +/* Accept unicast, bcast and mcast frames */ + +static void ath9k_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, + struct dev_mc_list *mclist) +{ + struct ath_softc *sc = hw->priv; + + changed_flags &= SUPPORTED_FILTERS; + *total_flags &= SUPPORTED_FILTERS; + + if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { + if (*total_flags & FIF_BCN_PRBRESP_PROMISC) + ath_scan_start(sc); + else + ath_scan_end(sc); + } +} + +static void ath9k_sta_notify(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum sta_notify_cmd cmd, + const u8 *addr) +{ + struct ath_softc *sc = hw->priv; + struct ath_node *an; + unsigned long flags; + DECLARE_MAC_BUF(mac); + + spin_lock_irqsave(&sc->node_lock, flags); + an = ath_node_find(sc, (u8 *) addr); + spin_unlock_irqrestore(&sc->node_lock, flags); + + switch (cmd) { + case STA_NOTIFY_ADD: + spin_lock_irqsave(&sc->node_lock, flags); + if (!an) { + ath_node_attach(sc, (u8 *)addr, 0); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a node: %s\n", + __func__, + print_mac(mac, addr)); + } else { + ath_node_get(sc, (u8 *)addr); + } + spin_unlock_irqrestore(&sc->node_lock, flags); + break; + case STA_NOTIFY_REMOVE: + if (!an) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Removal of a non-existent node\n", + __func__); + else { + ath_node_put(sc, an, ATH9K_BH_STATUS_INTACT); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Put a node: %s\n", + __func__, + print_mac(mac, addr)); + } + break; + default: + break; + } +} + +static int ath9k_conf_tx(struct ieee80211_hw *hw, + u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct ath_softc *sc = hw->priv; + struct ath9k_txq_info qi; + int ret = 0, qnum; + + if (queue >= WME_NUM_AC) + return 0; + + qi.tqi_aifs = params->aifs; + qi.tqi_cwmin = params->cw_min; + qi.tqi_cwmax = params->cw_max; + qi.tqi_burstTime = params->txop; + qnum = ath_get_hal_qnum(queue, sc); + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: Configure tx [queue/halq] [%d/%d], " + "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", + __func__, + queue, + qnum, + params->aifs, + params->cw_min, + params->cw_max, + params->txop); + + ret = ath_txq_update(sc, qnum, &qi); + if (ret) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: TXQ Update failed\n", __func__); + + return ret; +} + +static int ath9k_set_key(struct ieee80211_hw *hw, + enum set_key_cmd cmd, + const u8 *local_addr, + const u8 *addr, + struct ieee80211_key_conf *key) +{ + struct ath_softc *sc = hw->priv; + int ret = 0; + + DPRINTF(sc, ATH_DBG_KEYCACHE, " %s: Set HW Key\n", __func__); + + switch (cmd) { + case SET_KEY: + ret = ath_key_config(sc, addr, key); + if (!ret) { + set_bit(key->keyidx, sc->sc_keymap); + key->hw_key_idx = key->keyidx; + /* push IV and Michael MIC generation to stack */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + } + break; + case DISABLE_KEY: + ath_key_delete(sc, key); + clear_bit(key->keyidx, sc->sc_keymap); + sc->sc_keytype = ATH9K_CIPHER_CLR; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void ath9k_ht_conf(struct ath_softc *sc, + struct ieee80211_bss_conf *bss_conf) +{ +#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14) + struct ath_ht_info *ht_info = &sc->sc_ht_info; + + if (bss_conf->assoc_ht) { + ht_info->ext_chan_offset = + bss_conf->ht_bss_conf->bss_cap & + IEEE80211_HT_IE_CHA_SEC_OFFSET; + + if (!(bss_conf->ht_conf->cap & + IEEE80211_HT_CAP_40MHZ_INTOLERANT) && + (bss_conf->ht_bss_conf->bss_cap & + IEEE80211_HT_IE_CHA_WIDTH)) + ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040; + else + ht_info->tx_chan_width = ATH9K_HT_MACMODE_20; + + ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width); + ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + + bss_conf->ht_conf->ampdu_factor); + ht_info->mpdudensity = + parse_mpdudensity(bss_conf->ht_conf->ampdu_density); + + } + +#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT +} + +static void ath9k_bss_assoc_info(struct ath_softc *sc, + struct ieee80211_bss_conf *bss_conf) +{ + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_channel *curchan = hw->conf.channel; + struct ath_vap *avp; + int pos; + DECLARE_MAC_BUF(mac); + + if (bss_conf->assoc) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info ASSOC %d\n", + __func__, + bss_conf->aid); + + avp = sc->sc_vaps[0]; + if (avp == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", + __func__); + return; + } + + /* New association, store aid */ + if (avp->av_opmode == ATH9K_M_STA) { + sc->sc_curaid = bss_conf->aid; + ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid, + sc->sc_curaid); + } + + /* Configure the beacon */ + ath_beacon_config(sc, 0); + sc->sc_beacons = 1; + + /* Reset rssi stats */ + sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; + sc->sc_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER; + sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; + sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER; + + /* Update chainmask */ + ath_update_chainmask(sc, bss_conf->assoc_ht); + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: bssid %s aid 0x%x\n", + __func__, + print_mac(mac, sc->sc_curbssid), sc->sc_curaid); + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", + __func__, + curchan->center_freq); + + pos = ath_get_channel(sc, curchan); + if (pos == -1) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Invalid channel\n", __func__); + return; + } + + if (hw->conf.ht_conf.ht_supported) + sc->sc_ah->ah_channels[pos].chanmode = + ath_get_extchanmode(sc, curchan); + else + sc->sc_ah->ah_channels[pos].chanmode = + (curchan->band == IEEE80211_BAND_2GHZ) ? + CHANNEL_G : CHANNEL_A; + + /* set h/w channel */ + if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to set channel\n", + __func__); + + ath_rate_newstate(sc, avp); + /* Update ratectrl about the new state */ + ath_rc_node_update(hw, avp->rc_node); + } else { + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: Bss Info DISSOC\n", __func__); + sc->sc_curaid = 0; + } +} + +static void ath9k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changed) +{ + struct ath_softc *sc = hw->priv; + + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed PREAMBLE %d\n", + __func__, + bss_conf->use_short_preamble); + if (bss_conf->use_short_preamble) + sc->sc_flags |= ATH_PREAMBLE_SHORT; + else + sc->sc_flags &= ~ATH_PREAMBLE_SHORT; + } + + if (changed & BSS_CHANGED_ERP_CTS_PROT) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed CTS PROT %d\n", + __func__, + bss_conf->use_cts_prot); + if (bss_conf->use_cts_prot && + hw->conf.channel->band != IEEE80211_BAND_5GHZ) + sc->sc_flags |= ATH_PROTECT_ENABLE; + else + sc->sc_flags &= ~ATH_PROTECT_ENABLE; + } + + if (changed & BSS_CHANGED_HT) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT %d\n", + __func__, + bss_conf->assoc_ht); + ath9k_ht_conf(sc, bss_conf); + } + + if (changed & BSS_CHANGED_ASSOC) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed ASSOC %d\n", + __func__, + bss_conf->assoc); + ath9k_bss_assoc_info(sc, bss_conf); + } +} + +static u64 ath9k_get_tsf(struct ieee80211_hw *hw) +{ + u64 tsf; + struct ath_softc *sc = hw->priv; + struct ath_hal *ah = sc->sc_ah; + + tsf = ath9k_hw_gettsf64(ah); + + return tsf; +} + +static void ath9k_reset_tsf(struct ieee80211_hw *hw) +{ + struct ath_softc *sc = hw->priv; + struct ath_hal *ah = sc->sc_ah; + + ath9k_hw_reset_tsf(ah); +} + +static int ath9k_ampdu_action(struct ieee80211_hw *hw, + enum ieee80211_ampdu_mlme_action action, + const u8 *addr, + u16 tid, + u16 *ssn) +{ + struct ath_softc *sc = hw->priv; + int ret = 0; + + switch (action) { + case IEEE80211_AMPDU_RX_START: + ret = ath_rx_aggr_start(sc, addr, tid, ssn); + if (ret < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to start RX aggregation\n", + __func__); + break; + case IEEE80211_AMPDU_RX_STOP: + ret = ath_rx_aggr_stop(sc, addr, tid); + if (ret < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to stop RX aggregation\n", + __func__); + break; + case IEEE80211_AMPDU_TX_START: + ret = ath_tx_aggr_start(sc, addr, tid, ssn); + if (ret < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to start TX aggregation\n", + __func__); + else + ieee80211_start_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid); + break; + case IEEE80211_AMPDU_TX_STOP: + ret = ath_tx_aggr_stop(sc, addr, tid); + if (ret < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to stop TX aggregation\n", + __func__); + + ieee80211_stop_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid); + break; + default: + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unknown AMPDU action\n", __func__); + } + + return ret; +} + +static struct ieee80211_ops ath9k_ops = { + .tx = ath9k_tx, + .start = ath9k_start, + .stop = ath9k_stop, + .add_interface = ath9k_add_interface, + .remove_interface = ath9k_remove_interface, + .config = ath9k_config, + .config_interface = ath9k_config_interface, + .configure_filter = ath9k_configure_filter, + .get_stats = NULL, + .sta_notify = ath9k_sta_notify, + .conf_tx = ath9k_conf_tx, + .get_tx_stats = NULL, + .bss_info_changed = ath9k_bss_info_changed, + .set_tim = NULL, + .set_key = ath9k_set_key, + .hw_scan = NULL, + .get_tkip_seq = NULL, + .set_rts_threshold = NULL, + .set_frag_threshold = NULL, + .set_retry_limit = NULL, + .get_tsf = ath9k_get_tsf, + .reset_tsf = ath9k_reset_tsf, + .tx_last_beacon = NULL, + .ampdu_action = ath9k_ampdu_action +}; + +void ath_get_beaconconfig(struct ath_softc *sc, + int if_id, + struct ath_beacon_config *conf) +{ + struct ieee80211_hw *hw = sc->hw; + + /* fill in beacon config data */ + + conf->beacon_interval = hw->conf.beacon_int; + conf->listen_interval = 100; + conf->dtim_count = 1; + conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; +} + +int ath_update_beacon(struct ath_softc *sc, + int if_id, + struct ath_beacon_offset *bo, + struct sk_buff *skb, + int mcast) +{ + return 0; +} + +void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, + struct ath_xmit_status *tx_status, struct ath_node *an) +{ + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); + + DPRINTF(sc, ATH_DBG_XMIT, + "%s: TX complete: skb: %p\n", __func__, skb); + + if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || + tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { + /* free driver's private data area of tx_info */ + if (tx_info->driver_data[0] != NULL) + kfree(tx_info->driver_data[0]); + tx_info->driver_data[0] = NULL; + } + + if (tx_status->flags & ATH_TX_BAR) { + tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; + tx_status->flags &= ~ATH_TX_BAR; + } + if (tx_status->flags) + tx_info->status.excessive_retries = 1; + + tx_info->status.retry_count = tx_status->retries; + + ieee80211_tx_status(hw, skb); + if (an) + ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE); +} + +int ath__rx_indicate(struct ath_softc *sc, + struct sk_buff *skb, + struct ath_recv_status *status, + u16 keyix) +{ + struct ieee80211_hw *hw = sc->hw; + struct ath_node *an = NULL; + struct ieee80211_rx_status rx_status; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + int hdrlen = ieee80211_get_hdrlen_from_skb(skb); + int padsize; + enum ATH_RX_TYPE st; + + /* see if any padding is done by the hw and remove it */ + if (hdrlen & 3) { + padsize = hdrlen % 4; + memmove(skb->data + padsize, skb->data, hdrlen); + skb_pull(skb, padsize); + } + + /* remove FCS before passing up to protocol stack */ + skb_trim(skb, (skb->len - FCS_LEN)); + + /* Prepare rx status */ + ath9k_rx_prepare(sc, skb, status, &rx_status); + + if (!(keyix == ATH9K_RXKEYIX_INVALID) && + !(status->flags & ATH_RX_DECRYPT_ERROR)) { + rx_status.flag |= RX_FLAG_DECRYPTED; + } else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) + && !(status->flags & ATH_RX_DECRYPT_ERROR) + && skb->len >= hdrlen + 4) { + keyix = skb->data[hdrlen + 3] >> 6; + + if (test_bit(keyix, sc->sc_keymap)) + rx_status.flag |= RX_FLAG_DECRYPTED; + } + + spin_lock_bh(&sc->node_lock); + an = ath_node_find(sc, hdr->addr2); + spin_unlock_bh(&sc->node_lock); + + if (an) { + ath_rx_input(sc, an, + hw->conf.ht_conf.ht_supported, + skb, status, &st); + } + if (!an || (st != ATH_RX_CONSUMED)) + __ieee80211_rx(hw, skb, &rx_status); + + return 0; +} + +int ath_rx_subframe(struct ath_node *an, + struct sk_buff *skb, + struct ath_recv_status *status) +{ + struct ath_softc *sc = an->an_sc; + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_rx_status rx_status; + + /* Prepare rx status */ + ath9k_rx_prepare(sc, skb, status, &rx_status); + if (!(status->flags & ATH_RX_DECRYPT_ERROR)) + rx_status.flag |= RX_FLAG_DECRYPTED; + + __ieee80211_rx(hw, skb, &rx_status); + + return 0; +} + +enum ath9k_ht_macmode ath_cwm_macmode(struct ath_softc *sc) +{ + return sc->sc_ht_info.tx_chan_width; +} + +void ath_setup_rate(struct ath_softc *sc, + enum wireless_mode wMode, + enum RATE_TYPE type, + const struct ath9k_rate_table *rt) +{ + int i, maxrates, a = 0, b = 0; + struct ieee80211_supported_band *band_2ghz; + struct ieee80211_supported_band *band_5ghz; + struct ieee80211_rate *rates_2ghz; + struct ieee80211_rate *rates_5ghz; + + if ((wMode >= WIRELESS_MODE_MAX) || (type != NORMAL_RATE)) + return; + + band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ]; + band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ]; + rates_2ghz = sc->rates[IEEE80211_BAND_2GHZ]; + rates_5ghz = sc->rates[IEEE80211_BAND_5GHZ]; + + if (rt->rateCount > ATH_RATE_MAX) + maxrates = ATH_RATE_MAX; + else + maxrates = rt->rateCount; + + if ((band_2ghz->n_bitrates != 0) && (band_5ghz->n_bitrates != 0)) { + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: Rates already setup\n", __func__); + return; + } + + for (i = 0; i < maxrates; i++) { + switch (wMode) { + case WIRELESS_MODE_11b: + case WIRELESS_MODE_11g: + rates_2ghz[a].bitrate = rt->info[i].rateKbps / 100; + rates_2ghz[a].hw_value = rt->info[i].rateCode; + a++; + band_2ghz->n_bitrates = a; + break; + case WIRELESS_MODE_11a: + rates_5ghz[b].bitrate = rt->info[i].rateKbps / 100; + rates_5ghz[b].hw_value = rt->info[i].rateCode; + b++; + band_5ghz->n_bitrates = b; + break; + default: + break; + } + } + + if (band_2ghz->n_bitrates) { + for (i = 0; i < band_2ghz->n_bitrates; i++) { + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: 2GHz Rate: %2dMbps, ratecode: %2d\n", + __func__, + rates_2ghz[i].bitrate / 10, + rates_2ghz[i].hw_value); + } + } else if (band_5ghz->n_bitrates) { + for (i = 0; i < band_5ghz->n_bitrates; i++) { + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: 5Ghz Rate: %2dMbps, ratecode: %2d\n", + __func__, + rates_5ghz[i].bitrate / 10, + rates_5ghz[i].hw_value); + } + } +} + +static int ath_detach(struct ath_softc *sc) +{ + struct ieee80211_hw *hw = sc->hw; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__); + + /* Unregister hw */ + + ieee80211_unregister_hw(hw); + + /* unregister Rate control */ + ath_rate_control_unregister(); + + /* tx/rx cleanup */ + + ath_rx_cleanup(sc); + ath_tx_cleanup(sc); + + /* Deinit */ + + ath_deinit(sc); + + return 0; +} + +static int ath_attach(u16 devid, + struct ath_softc *sc) +{ + struct ieee80211_hw *hw = sc->hw; + int error = 0; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach ATH hw\n", __func__); + + error = ath_init(devid, sc); + if (error != 0) + return error; + + /* Init nodes */ + + INIT_LIST_HEAD(&sc->node_list); + spin_lock_init(&sc->node_lock); + + /* get mac address from hardware and set in mac80211 */ + + SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr); + + /* setup channels and rates */ + + sc->sbands[IEEE80211_BAND_2GHZ].channels = + sc->channels[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].bitrates = + sc->rates[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; + + if (sc->sc_ah->ah_caps.halHTSupport) + /* Setup HT capabilities for 2.4Ghz*/ + setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info); + + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &sc->sbands[IEEE80211_BAND_2GHZ]; + + if (sc->sc_ah->ah_caps.halWirelessModes & ATH9K_MODE_SEL_11A) { + sc->sbands[IEEE80211_BAND_5GHZ].channels = + sc->channels[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].bitrates = + sc->rates[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].band = + IEEE80211_BAND_5GHZ; + + if (sc->sc_ah->ah_caps.halHTSupport) + /* Setup HT capabilities for 5Ghz*/ + setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info); + + hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &sc->sbands[IEEE80211_BAND_5GHZ]; + } + + /* FIXME: Have to figure out proper hw init values later */ + + hw->queues = 4; + hw->ampdu_queues = 1; + + /* Register rate control */ + hw->rate_control_algorithm = "ath9k_rate_control"; + error = ath_rate_control_register(); + if (error != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to register rate control " + "algorithm:%d\n", __func__, error); + ath_rate_control_unregister(); + goto bad; + } + + error = ieee80211_register_hw(hw); + if (error != 0) { + ath_rate_control_unregister(); + goto bad; + } + + /* initialize tx/rx engine */ + + error = ath_tx_init(sc, ATH_TXBUF); + if (error != 0) + goto bad1; + + error = ath_rx_init(sc, ATH_RXBUF); + if (error != 0) + goto bad1; + + return 0; +bad1: + ath_detach(sc); +bad: + return error; +} + +static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + void __iomem *mem; + struct ath_softc *sc; + struct ieee80211_hw *hw; + const char *athname; + u8 csz; + u32 val; + int ret = 0; + + if (pci_enable_device(pdev)) + return -EIO; + + /* XXX 32-bit addressing only */ + if (pci_set_dma_mask(pdev, 0xffffffff)) { + printk(KERN_ERR "ath_pci: 32-bit DMA not available\n"); + ret = -ENODEV; + goto bad; + } + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); + if (csz == 0) { + /* + * Linux 2.4.18 (at least) writes the cache line size + * register as a 16-bit wide register which is wrong. + * We must have this setup properly for rx buffer + * DMA to work so force a reasonable value here if it + * comes up zero. + */ + csz = L1_CACHE_BYTES / sizeof(u32); + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); + } + /* + * The default setting of latency timer yields poor results, + * set it to the value used by other systems. It may be worth + * tweaking this setting more. + */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); + + pci_set_master(pdev); + + /* + * Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_read_config_dword(pdev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + + ret = pci_request_region(pdev, 0, "ath9k"); + if (ret) { + dev_err(&pdev->dev, "PCI memory region reserve error\n"); + ret = -ENODEV; + goto bad; + } + + mem = pci_iomap(pdev, 0, 0); + if (!mem) { + printk(KERN_ERR "PCI memory map error\n") ; + ret = -EIO; + goto bad1; + } + + hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops); + if (hw == NULL) { + printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n"); + goto bad2; + } + + hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_NOISE_DBM; + + SET_IEEE80211_DEV(hw, &pdev->dev); + pci_set_drvdata(pdev, hw); + + sc = hw->priv; + sc->hw = hw; + sc->pdev = pdev; + sc->mem = mem; + + if (ath_attach(id->device, sc) != 0) { + ret = -ENODEV; + goto bad3; + } + + /* setup interrupt service routine */ + + if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) { + printk(KERN_ERR "%s: request_irq failed\n", + wiphy_name(hw->wiphy)); + ret = -EIO; + goto bad4; + } + + athname = ath9k_hw_probe(id->vendor, id->device); + + printk(KERN_INFO "%s: %s: mem=0x%lx, irq=%d\n", + wiphy_name(hw->wiphy), + athname ? athname : "Atheros ???", + (unsigned long)mem, pdev->irq); + + return 0; +bad4: + ath_detach(sc); +bad3: + ieee80211_free_hw(hw); +bad2: + pci_iounmap(pdev, mem); +bad1: + pci_release_region(pdev, 0); +bad: + pci_disable_device(pdev); + return ret; +} + +static void ath_pci_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath_softc *sc = hw->priv; + + if (pdev->irq) + free_irq(pdev->irq, sc); + ath_detach(sc); + pci_iounmap(pdev, sc->mem); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + ieee80211_free_hw(hw); +} + +#ifdef CONFIG_PM + +static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, 3); + + return 0; +} + +static int ath_pci_resume(struct pci_dev *pdev) +{ + u32 val; + int err; + + err = pci_enable_device(pdev); + if (err) + return err; + pci_restore_state(pdev); + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state + */ + pci_read_config_dword(pdev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + + return 0; +} + +#endif /* CONFIG_PM */ + +MODULE_DEVICE_TABLE(pci, ath_pci_id_table); + +static struct pci_driver ath_pci_driver = { + .name = "ath9k", + .id_table = ath_pci_id_table, + .probe = ath_pci_probe, + .remove = ath_pci_remove, +#ifdef CONFIG_PM + .suspend = ath_pci_suspend, + .resume = ath_pci_resume, +#endif /* CONFIG_PM */ +}; + +static int __init init_ath_pci(void) +{ + printk(KERN_INFO "%s: %s\n", dev_info, ATH_PCI_VERSION); + + if (pci_register_driver(&ath_pci_driver) < 0) { + printk(KERN_ERR + "ath_pci: No devices found, driver not installed.\n"); + pci_unregister_driver(&ath_pci_driver); + return -ENODEV; + } + + return 0; +} +module_init(init_ath_pci); + +static void __exit exit_ath_pci(void) +{ + pci_unregister_driver(&ath_pci_driver); + printk(KERN_INFO "%s: driver unloaded\n", dev_info); +} +module_exit(exit_ath_pci); |