1 files changed, 253 insertions, 478 deletions

diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index d890f366a23b..9c854d6aae36 100644
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -36,17 +36,28 @@
 #include <linux/sched.h>
 
 
-/* Define to 1 to always calibrate all possible LO control pairs.
- * This is a workaround until we fix the partial LO calibration optimization. */
-#define B43_CALIB_ALL_LOCTLS	1
+static struct b43_lo_calib * b43_find_lo_calib(struct b43_txpower_lo_control *lo,
+					       const struct b43_bbatt *bbatt,
+					       const struct b43_rfatt *rfatt)
+{
+	struct b43_lo_calib *c;
+
+	list_for_each_entry(c, &lo->calib_list, list) {
+		if (!b43_compare_bbatt(&c->bbatt, bbatt))
+			continue;
+		if (!b43_compare_rfatt(&c->rfatt, rfatt))
+			continue;
+		return c;
+	}
 
+	return NULL;
+}
 
 /* Write the LocalOscillator Control (adjust) value-pair. */
 static void b43_lo_write(struct b43_wldev *dev, struct b43_loctl *control)
 {
 	struct b43_phy *phy = &dev->phy;
 	u16 value;
-	u16 reg;
 
 	if (B43_DEBUG) {
 		if (unlikely(abs(control->i) > 16 || abs(control->q) > 16)) {
@@ -56,189 +67,11 @@ static void b43_lo_write(struct b43_wldev *dev, struct b43_loctl *control)
 			return;
 		}
 	}
+	B43_WARN_ON(phy->type != B43_PHYTYPE_G);
 
 	value = (u8) (control->q);
 	value |= ((u8) (control->i)) << 8;
-
-	reg = (phy->type == B43_PHYTYPE_B) ? 0x002F : B43_PHY_LO_CTL;
-	b43_phy_write(dev, reg, value);
-}
-
-static int assert_rfatt_and_bbatt(const struct b43_rfatt *rfatt,
-				  const struct b43_bbatt *bbatt,
-				  struct b43_wldev *dev)
-{
-	int err = 0;
-
-	/* Check the attenuation values against the LO control array sizes. */
-	if (unlikely(rfatt->att >= B43_NR_RF)) {
-		b43err(dev->wl, "rfatt(%u) >= size of LO array\n", rfatt->att);
-		err = -EINVAL;
-	}
-	if (unlikely(bbatt->att >= B43_NR_BB)) {
-		b43err(dev->wl, "bbatt(%u) >= size of LO array\n", bbatt->att);
-		err = -EINVAL;
-	}
-
-	return err;
-}
-
-#if !B43_CALIB_ALL_LOCTLS
-static
-struct b43_loctl *b43_get_lo_g_ctl_nopadmix(struct b43_wldev *dev,
-					    const struct b43_rfatt *rfatt,
-					    const struct b43_bbatt *bbatt)
-{
-	struct b43_phy *phy = &dev->phy;
-	struct b43_txpower_lo_control *lo = phy->lo_control;
-
-	if (assert_rfatt_and_bbatt(rfatt, bbatt, dev))
-		return &(lo->no_padmix[0][0]);	/* Just prevent a crash */
-	return &(lo->no_padmix[bbatt->att][rfatt->att]);
-}
-#endif /* !B43_CALIB_ALL_LOCTLS */
-
-struct b43_loctl *b43_get_lo_g_ctl(struct b43_wldev *dev,
-				   const struct b43_rfatt *rfatt,
-				   const struct b43_bbatt *bbatt)
-{
-	struct b43_phy *phy = &dev->phy;
-	struct b43_txpower_lo_control *lo = phy->lo_control;
-
-	if (assert_rfatt_and_bbatt(rfatt, bbatt, dev))
-		return &(lo->no_padmix[0][0]);	/* Just prevent a crash */
-	if (rfatt->with_padmix)
-		return &(lo->with_padmix[bbatt->att][rfatt->att]);
-	return &(lo->no_padmix[bbatt->att][rfatt->att]);
-}
-
-/* Call a function for every possible LO control value-pair. */
-static void b43_call_for_each_loctl(struct b43_wldev *dev,
-				    void (*func) (struct b43_wldev *,
-						  struct b43_loctl *))
-{
-	struct b43_phy *phy = &dev->phy;
-	struct b43_txpower_lo_control *ctl = phy->lo_control;
-	int i, j;
-
-	for (i = 0; i < B43_NR_BB; i++) {
-		for (j = 0; j < B43_NR_RF; j++)
-			func(dev, &(ctl->with_padmix[i][j]));
-	}
-	for (i = 0; i < B43_NR_BB; i++) {
-		for (j = 0; j < B43_NR_RF; j++)
-			func(dev, &(ctl->no_padmix[i][j]));
-	}
-}
-
-static u16 lo_b_r15_loop(struct b43_wldev *dev)
-{
-	int i;
-	u16 ret = 0;
-
-	for (i = 0; i < 10; i++) {
-		b43_phy_write(dev, 0x0015, 0xAFA0);
-		udelay(1);
-		b43_phy_write(dev, 0x0015, 0xEFA0);
-		udelay(10);
-		b43_phy_write(dev, 0x0015, 0xFFA0);
-		udelay(40);
-		ret += b43_phy_read(dev, 0x002C);
-	}
-
-	return ret;
-}
-
-void b43_lo_b_measure(struct b43_wldev *dev)
-{
-	struct b43_phy *phy = &dev->phy;
-	u16 regstack[12] = { 0 };
-	u16 mls;
-	u16 fval;
-	int i, j;
-
-	regstack[0] = b43_phy_read(dev, 0x0015);
-	regstack[1] = b43_radio_read16(dev, 0x0052) & 0xFFF0;
-
-	if (phy->radio_ver == 0x2053) {
-		regstack[2] = b43_phy_read(dev, 0x000A);
-		regstack[3] = b43_phy_read(dev, 0x002A);
-		regstack[4] = b43_phy_read(dev, 0x0035);
-		regstack[5] = b43_phy_read(dev, 0x0003);
-		regstack[6] = b43_phy_read(dev, 0x0001);
-		regstack[7] = b43_phy_read(dev, 0x0030);
-
-		regstack[8] = b43_radio_read16(dev, 0x0043);
-		regstack[9] = b43_radio_read16(dev, 0x007A);
-		regstack[10] = b43_read16(dev, 0x03EC);
-		regstack[11] = b43_radio_read16(dev, 0x0052) & 0x00F0;
-
-		b43_phy_write(dev, 0x0030, 0x00FF);
-		b43_write16(dev, 0x03EC, 0x3F3F);
-		b43_phy_write(dev, 0x0035, regstack[4] & 0xFF7F);
-		b43_radio_write16(dev, 0x007A, regstack[9] & 0xFFF0);
-	}
-	b43_phy_write(dev, 0x0015, 0xB000);
-	b43_phy_write(dev, 0x002B, 0x0004);
-
-	if (phy->radio_ver == 0x2053) {
-		b43_phy_write(dev, 0x002B, 0x0203);
-		b43_phy_write(dev, 0x002A, 0x08A3);
-	}
-
-	phy->minlowsig[0] = 0xFFFF;
-
-	for (i = 0; i < 4; i++) {
-		b43_radio_write16(dev, 0x0052, regstack[1] | i);
-		lo_b_r15_loop(dev);
-	}
-	for (i = 0; i < 10; i++) {
-		b43_radio_write16(dev, 0x0052, regstack[1] | i);
-		mls = lo_b_r15_loop(dev) / 10;
-		if (mls < phy->minlowsig[0]) {
-			phy->minlowsig[0] = mls;
-			phy->minlowsigpos[0] = i;
-		}
-	}
-	b43_radio_write16(dev, 0x0052, regstack[1] | phy->minlowsigpos[0]);
-
-	phy->minlowsig[1] = 0xFFFF;
-
-	for (i = -4; i < 5; i += 2) {
-		for (j = -4; j < 5; j += 2) {
-			if (j < 0)
-				fval = (0x0100 * i) + j + 0x0100;
-			else
-				fval = (0x0100 * i) + j;
-			b43_phy_write(dev, 0x002F, fval);
-			mls = lo_b_r15_loop(dev) / 10;
-			if (mls < phy->minlowsig[1]) {
-				phy->minlowsig[1] = mls;
-				phy->minlowsigpos[1] = fval;
-			}
-		}
-	}
-	phy->minlowsigpos[1] += 0x0101;
-
-	b43_phy_write(dev, 0x002F, phy->minlowsigpos[1]);
-	if (phy->radio_ver == 0x2053) {
-		b43_phy_write(dev, 0x000A, regstack[2]);
-		b43_phy_write(dev, 0x002A, regstack[3]);
-		b43_phy_write(dev, 0x0035, regstack[4]);
-		b43_phy_write(dev, 0x0003, regstack[5]);
-		b43_phy_write(dev, 0x0001, regstack[6]);
-		b43_phy_write(dev, 0x0030, regstack[7]);
-
-		b43_radio_write16(dev, 0x0043, regstack[8]);
-		b43_radio_write16(dev, 0x007A, regstack[9]);
-
-		b43_radio_write16(dev, 0x0052,
-				  (b43_radio_read16(dev, 0x0052) & 0x000F)
-				  | regstack[11]);
-
-		b43_write16(dev, 0x03EC, regstack[10]);
-	}
-	b43_phy_write(dev, 0x0015, regstack[0]);
+	b43_phy_write(dev, B43_PHY_LO_CTL, value);
 }
 
 static u16 lo_measure_feedthrough(struct b43_wldev *dev,
@@ -366,7 +199,7 @@ static void lo_measure_txctl_values(struct b43_wldev *dev)
 		if (lb_gain > 10) {
 			radio_pctl_reg = 0;
 			pga = abs(10 - lb_gain) / 6;
-			pga = limit_value(pga, 0, 15);
+			pga = clamp_val(pga, 0, 15);
 		} else {
 			int cmp_val;
 			int tmp;
@@ -438,48 +271,26 @@ static void lo_measure_txctl_values(struct b43_wldev *dev)
 		b43_radio_write16(dev, 0x52, b43_radio_read16(dev, 0x52)
 				  & 0xFFF0);	/* TX bias == 0 */
 	}
+	lo->txctl_measured_time = jiffies;
 }
 
 static void lo_read_power_vector(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
 	struct b43_txpower_lo_control *lo = phy->lo_control;
-	u16 i;
+	int i;
 	u64 tmp;
 	u64 power_vector = 0;
-	int rf_offset, bb_offset;
-	struct b43_loctl *loctl;
 
 	for (i = 0; i < 8; i += 2) {
 		tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x310 + i);
-		/* Clear the top byte. We get holes in the bitmap... */
-		tmp &= 0xFF;
 		power_vector |= (tmp << (i * 8));
 		/* Clear the vector on the device. */
 		b43_shm_write16(dev, B43_SHM_SHARED, 0x310 + i, 0);
 	}
-
 	if (power_vector)
 		lo->power_vector = power_vector;
-	power_vector = lo->power_vector;
-
-	for (i = 0; i < 64; i++) {
-		if (power_vector & ((u64) 1ULL << i)) {
-			/* Now figure out which b43_loctl corresponds
-			 * to this bit.
-			 */
-			rf_offset = i / lo->rfatt_list.len;
-			bb_offset = i % lo->rfatt_list.len;	//FIXME?
-			loctl =
-			    b43_get_lo_g_ctl(dev,
-					     &lo->rfatt_list.list[rf_offset],
-					     &lo->bbatt_list.list[bb_offset]);
-			/* And mark it as "used", as the device told us
-			 * through the bitmap it is using it.
-			 */
-			loctl->used = 1;
-		}
-	}
+	lo->pwr_vec_read_time = jiffies;
 }
 
 /* 802.11/LO/GPHY/MeasuringGains */
@@ -510,7 +321,7 @@ static void lo_measure_gain_values(struct b43_wldev *dev,
 			phy->lna_lod_gain = 1;
 			trsw_rx_gain -= 8;
 		}
-		trsw_rx_gain = limit_value(trsw_rx_gain, 0, 0x2D);
+		trsw_rx_gain = clamp_val(trsw_rx_gain, 0, 0x2D);
 		phy->pga_gain = trsw_rx_gain / 3;
 		if (phy->pga_gain >= 5) {
 			phy->pga_gain -= 5;
@@ -609,8 +420,6 @@ static void lo_measure_setup(struct b43_wldev *dev,
 		b43_phy_write(dev, B43_PHY_CCK(0x16), 0x410);
 		b43_phy_write(dev, B43_PHY_CCK(0x17), 0x820);
 	}
-	if (!lo->rebuild && b43_has_hardware_pctl(phy))
-		lo_read_power_vector(dev);
 	if (phy->rev >= 2) {
 		sav->phy_analogover = b43_phy_read(dev, B43_PHY_ANALOGOVER);
 		sav->phy_analogoverval =
@@ -691,8 +500,12 @@ static void lo_measure_setup(struct b43_wldev *dev,
 	b43_radio_read16(dev, 0x51);	/* dummy read */
 	if (phy->type == B43_PHYTYPE_G)
 		b43_phy_write(dev, B43_PHY_CCK(0x2F), 0);
-	if (lo->rebuild)
+
+	/* Re-measure the txctl values, if needed. */
+	if (time_before(lo->txctl_measured_time,
+			jiffies - B43_LO_TXCTL_EXPIRE))
 		lo_measure_txctl_values(dev);
+
 	if (phy->type == B43_PHYTYPE_G && phy->rev >= 3) {
 		b43_phy_write(dev, B43_PHY_LO_MASK, 0xC078);
 	} else {
@@ -707,7 +520,6 @@ static void lo_measure_restore(struct b43_wldev *dev,
 			       struct lo_g_saved_values *sav)
 {
 	struct b43_phy *phy = &dev->phy;
-	struct b43_txpower_lo_control *lo = phy->lo_control;
 	u16 tmp;
 
 	if (phy->rev >= 2) {
@@ -722,14 +534,6 @@ static void lo_measure_restore(struct b43_wldev *dev,
 		tmp = (phy->pga_gain | 0xEFA0);
 		b43_phy_write(dev, B43_PHY_PGACTL, tmp);
 	}
-	if (b43_has_hardware_pctl(phy)) {
-		b43_gphy_dc_lt_init(dev);
-	} else {
-		if (lo->rebuild)
-			b43_lo_g_adjust_to(dev, 3, 2, 0);
-		else
-			b43_lo_g_adjust(dev);
-	}
 	if (phy->type == B43_PHYTYPE_G) {
 		if (phy->rev >= 3)
 			b43_phy_write(dev, B43_PHY_CCK(0x2E), 0xC078);
@@ -793,7 +597,6 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev,
 				    struct b43_lo_g_statemachine *d)
 {
 	struct b43_phy *phy = &dev->phy;
-	struct b43_txpower_lo_control *lo = phy->lo_control;
 	struct b43_loctl test_loctl;
 	struct b43_loctl orig_loctl;
 	struct b43_loctl prev_loctl = {
@@ -852,7 +655,7 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev,
 				found_lower = 1;
 				d->lowest_feedth = feedth;
 				if ((d->nr_measured < 2) &&
-				    (!has_loopback_gain(phy) || lo->rebuild))
+				    !has_loopback_gain(phy))
 					break;
 			}
 		}
@@ -874,7 +677,6 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev,
 					 int *max_rx_gain)
 {
 	struct b43_phy *phy = &dev->phy;
-	struct b43_txpower_lo_control *lo = phy->lo_control;
 	struct b43_lo_g_statemachine d;
 	u16 feedth;
 	int found_lower;
@@ -883,18 +685,18 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev,
 
 	d.nr_measured = 0;
 	d.state_val_multiplier = 1;
-	if (has_loopback_gain(phy) && !lo->rebuild)
+	if (has_loopback_gain(phy))
 		d.state_val_multiplier = 3;
 
 	memcpy(&d.min_loctl, loctl, sizeof(struct b43_loctl));
-	if (has_loopback_gain(phy) && lo->rebuild)
+	if (has_loopback_gain(phy))
 		max_repeat = 4;
 	do {
 		b43_lo_write(dev, &d.min_loctl);
 		feedth = lo_measure_feedthrough(dev, phy->lna_gain,
 						phy->pga_gain,
 						phy->trsw_rx_gain);
-		if (!lo->rebuild && feedth < 0x258) {
+		if (feedth < 0x258) {
 			if (feedth >= 0x12C)
 				*max_rx_gain += 6;
 			else
@@ -944,278 +746,188 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev,
 	} while (++repeat_cnt < max_repeat);
 }
 
-#if B43_CALIB_ALL_LOCTLS
-static const struct b43_rfatt b43_full_rfatt_list_items[] = {
-	{ .att = 0, .with_padmix = 0, },
-	{ .att = 1, .with_padmix = 0, },
-	{ .att = 2, .with_padmix = 0, },
-	{ .att = 3, .with_padmix = 0, },
-	{ .att = 4, .with_padmix = 0, },
-	{ .att = 5, .with_padmix = 0, },
-	{ .att = 6, .with_padmix = 0, },
-	{ .att = 7, .with_padmix = 0, },
-	{ .att = 8, .with_padmix = 0, },
-	{ .att = 9, .with_padmix = 0, },
-	{ .att = 10, .with_padmix = 0, },
-	{ .att = 11, .with_padmix = 0, },
-	{ .att = 12, .with_padmix = 0, },
-	{ .att = 13, .with_padmix = 0, },
-	{ .att = 14, .with_padmix = 0, },
-	{ .att = 15, .with_padmix = 0, },
-	{ .att = 0, .with_padmix = 1, },
-	{ .att = 1, .with_padmix = 1, },
-	{ .att = 2, .with_padmix = 1, },
-	{ .att = 3, .with_padmix = 1, },
-	{ .att = 4, .with_padmix = 1, },
-	{ .att = 5, .with_padmix = 1, },
-	{ .att = 6, .with_padmix = 1, },
-	{ .att = 7, .with_padmix = 1, },
-	{ .att = 8, .with_padmix = 1, },
-	{ .att = 9, .with_padmix = 1, },
-	{ .att = 10, .with_padmix = 1, },
-	{ .att = 11, .with_padmix = 1, },
-	{ .att = 12, .with_padmix = 1, },
-	{ .att = 13, .with_padmix = 1, },
-	{ .att = 14, .with_padmix = 1, },
-	{ .att = 15, .with_padmix = 1, },
-};
-static const struct b43_rfatt_list b43_full_rfatt_list = {
-	.list		= b43_full_rfatt_list_items,
-	.len		= ARRAY_SIZE(b43_full_rfatt_list_items),
-};
-
-static const struct b43_bbatt b43_full_bbatt_list_items[] = {
-	{ .att = 0, },
-	{ .att = 1, },
-	{ .att = 2, },
-	{ .att = 3, },
-	{ .att = 4, },
-	{ .att = 5, },
-	{ .att = 6, },
-	{ .att = 7, },
-	{ .att = 8, },
-	{ .att = 9, },
-	{ .att = 10, },
-	{ .att = 11, },
-};
-static const struct b43_bbatt_list b43_full_bbatt_list = {
-	.list		= b43_full_bbatt_list_items,
-	.len		= ARRAY_SIZE(b43_full_bbatt_list_items),
-};
-#endif /* B43_CALIB_ALL_LOCTLS */
-
-static void lo_measure(struct b43_wldev *dev)
+static
+struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev,
+					       const struct b43_bbatt *bbatt,
+					       const struct b43_rfatt *rfatt)
 {
 	struct b43_phy *phy = &dev->phy;
-	struct b43_txpower_lo_control *lo = phy->lo_control;
 	struct b43_loctl loctl = {
 		.i = 0,
 		.q = 0,
 	};
-	struct b43_loctl *ploctl;
 	int max_rx_gain;
-	int rfidx, bbidx;
-	const struct b43_bbatt_list *bbatt_list;
-	const struct b43_rfatt_list *rfatt_list;
-
+	struct b43_lo_calib *cal;
+	struct lo_g_saved_values uninitialized_var(saved_regs);
 	/* Values from the "TXCTL Register and Value Table" */
 	u16 txctl_reg;
 	u16 txctl_value;
 	u16 pad_mix_gain;
 
-	bbatt_list = &lo->bbatt_list;
-	rfatt_list = &lo->rfatt_list;
-#if B43_CALIB_ALL_LOCTLS
-	bbatt_list = &b43_full_bbatt_list;
-	rfatt_list = &b43_full_rfatt_list;
-#endif
+	saved_regs.old_channel = phy->channel;
+	b43_mac_suspend(dev);
+	lo_measure_setup(dev, &saved_regs);
 
 	txctl_reg = lo_txctl_register_table(dev, &txctl_value, &pad_mix_gain);
 
-	for (rfidx = 0; rfidx < rfatt_list->len; rfidx++) {
-
-		b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43)
-					      & 0xFFF0) |
-				  rfatt_list->list[rfidx].att);
-		b43_radio_write16(dev, txctl_reg,
-				  (b43_radio_read16(dev, txctl_reg)
-				   & ~txctl_value)
-				  | (rfatt_list->list[rfidx].with_padmix ?
-				     txctl_value : 0));
-
-		for (bbidx = 0; bbidx < bbatt_list->len; bbidx++) {
-			if (lo->rebuild) {
-#if B43_CALIB_ALL_LOCTLS
-				ploctl = b43_get_lo_g_ctl(dev,
-							  &rfatt_list->list[rfidx],
-							  &bbatt_list->list[bbidx]);
-#else
-				ploctl = b43_get_lo_g_ctl_nopadmix(dev,
-								   &rfatt_list->
-								   list[rfidx],
-								   &bbatt_list->
-								   list[bbidx]);
-#endif
-			} else {
-				ploctl = b43_get_lo_g_ctl(dev,
-							  &rfatt_list->list[rfidx],
-							  &bbatt_list->list[bbidx]);
-				if (!ploctl->used)
-					continue;
-			}
-			memcpy(&loctl, ploctl, sizeof(loctl));
-			loctl.i = 0;
-			loctl.q = 0;
-
-			max_rx_gain = rfatt_list->list[rfidx].att * 2;
-			max_rx_gain += bbatt_list->list[bbidx].att / 2;
-			if (rfatt_list->list[rfidx].with_padmix)
-				max_rx_gain -= pad_mix_gain;
-			if (has_loopback_gain(phy))
-				max_rx_gain += phy->max_lb_gain;
-			lo_measure_gain_values(dev, max_rx_gain,
-					       has_loopback_gain(phy));
-
-			b43_phy_set_baseband_attenuation(dev,
-							 bbatt_list->list[bbidx].att);
-			lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain);
-			if (phy->type == B43_PHYTYPE_B) {
-				loctl.i++;
-				loctl.q++;
-			}
-			b43_loctl_set_calibrated(&loctl, 1);
-			memcpy(ploctl, &loctl, sizeof(loctl));
-		}
-	}
-}
-
-#if B43_DEBUG
-static void do_validate_loctl(struct b43_wldev *dev, struct b43_loctl *control)
-{
-	const int is_initializing = (b43_status(dev) == B43_STAT_UNINIT);
-	int i = control->i;
-	int q = control->q;
+	b43_radio_write16(dev, 0x43,
+			  (b43_radio_read16(dev, 0x43) & 0xFFF0)
+			  | rfatt->att);
+	b43_radio_write16(dev, txctl_reg,
+			  (b43_radio_read16(dev, txctl_reg) & ~txctl_value)
+			  | (rfatt->with_padmix) ? txctl_value : 0);
 
-	if (b43_loctl_is_calibrated(control)) {
-		if ((abs(i) > 16) || (abs(q) > 16))
-			goto error;
-	} else {
-		if (control->used)
-			goto error;
-		if (dev->phy.lo_control->rebuild) {
-			control->i = 0;
-			control->q = 0;
-			if ((i != B43_LOCTL_POISON) ||
-			    (q != B43_LOCTL_POISON))
-				goto error;
-		}
+	max_rx_gain = rfatt->att * 2;
+	max_rx_gain += bbatt->att / 2;
+	if (rfatt->with_padmix)
+		max_rx_gain -= pad_mix_gain;
+	if (has_loopback_gain(phy))
+		max_rx_gain += phy->max_lb_gain;
+	lo_measure_gain_values(dev, max_rx_gain,
+			       has_loopback_gain(phy));
+
+	b43_phy_set_baseband_attenuation(dev, bbatt->att);
+	lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain);
+
+	lo_measure_restore(dev, &saved_regs);
+	b43_mac_enable(dev);
+
+	if (b43_debug(dev, B43_DBG_LO)) {
+		b43dbg(dev->wl, "LO: Calibrated for BB(%u), RF(%u,%u) "
+		       "=> I=%d Q=%d\n",
+		       bbatt->att, rfatt->att, rfatt->with_padmix,
+		       loctl.i, loctl.q);
 	}
-	if (is_initializing && control->used)
-		goto error;
-
-	return;
-error:
-	b43err(dev->wl, "LO control pair validation failed "
-	       "(I: %d, Q: %d, used %u, calib: %u, initing: %d)\n",
-	       i, q, control->used,
-	       b43_loctl_is_calibrated(control),
-	       is_initializing);
-}
 
-static void validate_all_loctls(struct b43_wldev *dev)
-{
-	b43_call_for_each_loctl(dev, do_validate_loctl);
-}
-
-static void do_reset_calib(struct b43_wldev *dev, struct b43_loctl *control)
-{
-	if (dev->phy.lo_control->rebuild ||
-	    control->used) {
-		b43_loctl_set_calibrated(control, 0);
-		control->i = B43_LOCTL_POISON;
-		control->q = B43_LOCTL_POISON;
+	cal = kmalloc(sizeof(*cal), GFP_KERNEL);
+	if (!cal) {
+		b43warn(dev->wl, "LO calib: out of memory\n");
+		return NULL;
 	}
+	memcpy(&cal->bbatt, bbatt, sizeof(*bbatt));
+	memcpy(&cal->rfatt, rfatt, sizeof(*rfatt));
+	memcpy(&cal->ctl, &loctl, sizeof(loctl));
+	cal->calib_time = jiffies;
+	INIT_LIST_HEAD(&cal->list);
+
+	return cal;
 }
 
-static void reset_all_loctl_calibration_states(struct b43_wldev *dev)
+/* Get a calibrated LO setting for the given attenuation values.
+ * Might return a NULL pointer under OOM! */
+static
+struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev,
+						const struct b43_bbatt *bbatt,
+						const struct b43_rfatt *rfatt)
 {
-	b43_call_for_each_loctl(dev, do_reset_calib);
+	struct b43_txpower_lo_control *lo = dev->phy.lo_control;
+	struct b43_lo_calib *c;
+
+	c = b43_find_lo_calib(lo, bbatt, rfatt);
+	if (c)
+		return c;
+	/* Not in the list of calibrated LO settings.
+	 * Calibrate it now. */
+	c = b43_calibrate_lo_setting(dev, bbatt, rfatt);
+	if (!c)
+		return NULL;
+	list_add(&c->list, &lo->calib_list);
+
+	return c;
 }
 
-#else /* B43_DEBUG */
-static inline void validate_all_loctls(struct b43_wldev *dev) { }
-static inline void reset_all_loctl_calibration_states(struct b43_wldev *dev) { }
-#endif /* B43_DEBUG */
-
-void b43_lo_g_measure(struct b43_wldev *dev)
+void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all)
 {
 	struct b43_phy *phy = &dev->phy;
-	struct lo_g_saved_values uninitialized_var(sav);
-
-	B43_WARN_ON((phy->type != B43_PHYTYPE_B) &&
-		    (phy->type != B43_PHYTYPE_G));
-
-	sav.old_channel = phy->channel;
-	lo_measure_setup(dev, &sav);
-	reset_all_loctl_calibration_states(dev);
-	lo_measure(dev);
-	lo_measure_restore(dev, &sav);
-
-	validate_all_loctls(dev);
+	struct b43_txpower_lo_control *lo = phy->lo_control;
+	int i;
+	int rf_offset, bb_offset;
+	const struct b43_rfatt *rfatt;
+	const struct b43_bbatt *bbatt;
+	u64 power_vector;
+	bool table_changed = 0;
 
-	phy->lo_control->lo_measured = 1;
-	phy->lo_control->rebuild = 0;
-}
+	BUILD_BUG_ON(B43_DC_LT_SIZE != 32);
+	B43_WARN_ON(lo->rfatt_list.len * lo->bbatt_list.len > 64);
 
-#if B43_DEBUG
-static void validate_loctl_calibration(struct b43_wldev *dev,
-				       struct b43_loctl *loctl,
-				       struct b43_rfatt *rfatt,
-				       struct b43_bbatt *bbatt)
-{
-	if (b43_loctl_is_calibrated(loctl))
-		return;
-	if (!dev->phy.lo_control->lo_measured) {
-		/* On init we set the attenuation values before we
-		 * calibrated the LO. I guess that's OK. */
-		return;
+	power_vector = lo->power_vector;
+	if (!update_all && !power_vector)
+		return; /* Nothing to do. */
+
+	/* Suspend the MAC now to avoid continuous suspend/enable
+	 * cycles in the loop. */
+	b43_mac_suspend(dev);
+
+	for (i = 0; i < B43_DC_LT_SIZE * 2; i++) {
+		struct b43_lo_calib *cal;
+		int idx;
+		u16 val;
+
+		if (!update_all && !(power_vector & (((u64)1ULL) << i)))
+			continue;
+		/* Update the table entry for this power_vector bit.
+		 * The table rows are RFatt entries and columns are BBatt. */
+		bb_offset = i / lo->rfatt_list.len;
+		rf_offset = i % lo->rfatt_list.len;
+		bbatt = &(lo->bbatt_list.list[bb_offset]);
+		rfatt = &(lo->rfatt_list.list[rf_offset]);
+
+		cal = b43_calibrate_lo_setting(dev, bbatt, rfatt);
+		if (!cal) {
+			b43warn(dev->wl, "LO: Could not "
+				"calibrate DC table entry\n");
+			continue;
+		}
+		/*FIXME: Is Q really in the low nibble? */
+		val = (u8)(cal->ctl.q);
+		val |= ((u8)(cal->ctl.i)) << 4;
+		kfree(cal);
+
+		/* Get the index into the hardware DC LT. */
+		idx = i / 2;
+		/* Change the table in memory. */
+		if (i % 2) {
+			/* Change the high byte. */
+			lo->dc_lt[idx] = (lo->dc_lt[idx] & 0x00FF)
+					 | ((val & 0x00FF) << 8);
+		} else {
+			/* Change the low byte. */
+			lo->dc_lt[idx] = (lo->dc_lt[idx] & 0xFF00)
+					 | (val & 0x00FF);
+		}
+		table_changed = 1;
 	}
-	b43err(dev->wl, "Adjusting Local Oscillator to an uncalibrated "
-	       "control pair: rfatt=%u,%spadmix bbatt=%u\n",
-	       rfatt->att,
-	       (rfatt->with_padmix) ? "" : "no-",
-	       bbatt->att);
-}
-#else
-static inline void validate_loctl_calibration(struct b43_wldev *dev,
-					      struct b43_loctl *loctl,
-					      struct b43_rfatt *rfatt,
-					      struct b43_bbatt *bbatt)
-{
+	if (table_changed) {
+		/* The table changed in memory. Update the hardware table. */
+		for (i = 0; i < B43_DC_LT_SIZE; i++)
+			b43_phy_write(dev, 0x3A0 + i, lo->dc_lt[i]);
+	}
+	b43_mac_enable(dev);
 }
-#endif
 
-static inline void fixup_rfatt_for_txcontrol(struct b43_rfatt *rf,
-					     u8 tx_control)
+/* Fixup the RF attenuation value for the case where we are
+ * using the PAD mixer. */
+static inline void b43_lo_fixup_rfatt(struct b43_rfatt *rf)
 {
-	if (tx_control & B43_TXCTL_TXMIX) {
-		if (rf->att < 5)
-			rf->att = 4;
-	}
+	if (!rf->with_padmix)
+		return;
+	if ((rf->att != 1) && (rf->att != 2) && (rf->att != 3))
+		rf->att = 4;
 }
 
 void b43_lo_g_adjust(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
+	struct b43_lo_calib *cal;
 	struct b43_rfatt rf;
-	struct b43_loctl *loctl;
 
 	memcpy(&rf, &phy->rfatt, sizeof(rf));
-	fixup_rfatt_for_txcontrol(&rf, phy->tx_control);
+	b43_lo_fixup_rfatt(&rf);
 
-	loctl = b43_get_lo_g_ctl(dev, &rf, &phy->bbatt);
-	validate_loctl_calibration(dev, loctl, &rf, &phy->bbatt);
-	b43_lo_write(dev, loctl);
+	cal = b43_get_calib_lo_settings(dev, &phy->bbatt, &rf);
+	if (!cal)
+		return;
+	b43_lo_write(dev, &cal->ctl);
 }
 
 void b43_lo_g_adjust_to(struct b43_wldev *dev,
@@ -1223,39 +935,102 @@ void b43_lo_g_adjust_to(struct b43_wldev *dev,
 {
 	struct b43_rfatt rf;
 	struct b43_bbatt bb;
-	struct b43_loctl *loctl;
+	struct b43_lo_calib *cal;
 
 	memset(&rf, 0, sizeof(rf));
 	memset(&bb, 0, sizeof(bb));
 	rf.att = rfatt;
 	bb.att = bbatt;
-	fixup_rfatt_for_txcontrol(&rf, tx_control);
-	loctl = b43_get_lo_g_ctl(dev, &rf, &bb);
-	validate_loctl_calibration(dev, loctl, &rf, &bb);
-	b43_lo_write(dev, loctl);
+	b43_lo_fixup_rfatt(&rf);
+	cal = b43_get_calib_lo_settings(dev, &bb, &rf);
+	if (!cal)
+		return;
+	b43_lo_write(dev, &cal->ctl);
 }
 
-static void do_mark_unused(struct b43_wldev *dev, struct b43_loctl *control)
+/* Periodic LO maintanance work */
+void b43_lo_g_maintanance_work(struct b43_wldev *dev)
 {
-	control->used = 0;
+	struct b43_phy *phy = &dev->phy;
+	struct b43_txpower_lo_control *lo = phy->lo_control;
+	unsigned long now;
+	unsigned long expire;
+	struct b43_lo_calib *cal, *tmp;
+	bool current_item_expired = 0;
+	bool hwpctl;
+
+	if (!lo)
+		return;
+	now = jiffies;
+	hwpctl = b43_has_hardware_pctl(phy);
+
+	if (hwpctl) {
+		/* Read the power vector and update it, if needed. */
+		expire = now - B43_LO_PWRVEC_EXPIRE;
+		if (time_before(lo->pwr_vec_read_time, expire)) {
+			lo_read_power_vector(dev);
+			b43_gphy_dc_lt_init(dev, 0);
+		}
+		//FIXME Recalc the whole DC table from time to time?
+	}
+
+	if (hwpctl)
+		return;
+	/* Search for expired LO settings. Remove them.
+	 * Recalibrate the current setting, if expired. */
+	expire = now - B43_LO_CALIB_EXPIRE;
+	list_for_each_entry_safe(cal, tmp, &lo->calib_list, list) {
+		if (!time_before(cal->calib_time, expire))
+			continue;
+		/* This item expired. */
+		if (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) &&
+		    b43_compare_rfatt(&cal->rfatt, &phy->rfatt)) {
+			B43_WARN_ON(current_item_expired);
+			current_item_expired = 1;
+		}
+		if (b43_debug(dev, B43_DBG_LO)) {
+			b43dbg(dev->wl, "LO: Item BB(%u), RF(%u,%u), "
+			       "I=%d, Q=%d expired\n",
+			       cal->bbatt.att, cal->rfatt.att,
+			       cal->rfatt.with_padmix,
+			       cal->ctl.i, cal->ctl.q);
+		}
+		list_del(&cal->list);
+		kfree(cal);
+	}
+	if (current_item_expired || unlikely(list_empty(&lo->calib_list))) {
+		/* Recalibrate currently used LO setting. */
+		if (b43_debug(dev, B43_DBG_LO))
+			b43dbg(dev->wl, "LO: Recalibrating current LO setting\n");
+		cal = b43_calibrate_lo_setting(dev, &phy->bbatt, &phy->rfatt);
+		if (cal) {
+			list_add(&cal->list, &lo->calib_list);
+			b43_lo_write(dev, &cal->ctl);
+		} else
+			b43warn(dev->wl, "Failed to recalibrate current LO setting\n");
+	}
 }
 
-void b43_lo_g_ctl_mark_all_unused(struct b43_wldev *dev)
+void b43_lo_g_cleanup(struct b43_wldev *dev)
 {
-	struct b43_phy *phy = &dev->phy;
-	struct b43_txpower_lo_control *lo = phy->lo_control;
+	struct b43_txpower_lo_control *lo = dev->phy.lo_control;
+	struct b43_lo_calib *cal, *tmp;
 
-	b43_call_for_each_loctl(dev, do_mark_unused);
-	lo->rebuild = 1;
+	if (!lo)
+		return;
+	list_for_each_entry_safe(cal, tmp, &lo->calib_list, list) {
+		list_del(&cal->list);
+		kfree(cal);
+	}
 }
 
-void b43_lo_g_ctl_mark_cur_used(struct b43_wldev *dev)
+/* LO Initialization */
+void b43_lo_g_init(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
-	struct b43_rfatt rf;
 
-	memcpy(&rf, &phy->rfatt, sizeof(rf));
-	fixup_rfatt_for_txcontrol(&rf, phy->tx_control);
-
-	b43_get_lo_g_ctl(dev, &rf, &phy->bbatt)->used = 1;
+	if (b43_has_hardware_pctl(phy)) {
+		lo_read_power_vector(dev);
+		b43_gphy_dc_lt_init(dev, 1);
+	}
 }