diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/dvm/dev.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/dev.h | 1073 |
1 files changed, 1073 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/dvm/dev.h b/drivers/net/wireless/iwlwifi/dvm/dev.h new file mode 100644 index 000000000000..2880a0a3da68 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/dvm/dev.h @@ -0,0 +1,1073 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +/* + * Please use this file (dev.h) for driver implementation definitions. + * Please use commands.h for uCode API definitions. + */ + +#ifndef __iwl_dev_h__ +#define __iwl_dev_h__ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/wait.h> +#include <linux/leds.h> +#include <linux/slab.h> +#include <linux/mutex.h> + +#include "iwl-fw.h" +#include "iwl-csr.h" +#include "iwl-debug.h" +#include "iwl-agn-hw.h" +#include "iwl-op-mode.h" +#include "iwl-notif-wait.h" +#include "iwl-trans.h" + +#include "eeprom.h" +#include "led.h" +#include "power.h" +#include "rs.h" +#include "tt.h" + +/* CT-KILL constants */ +#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */ +#define CT_KILL_THRESHOLD 114 /* in Celsius */ +#define CT_KILL_EXIT_THRESHOLD 95 /* in Celsius */ + +/* Default noise level to report when noise measurement is not available. + * This may be because we're: + * 1) Not associated no beacon statistics being sent to driver) + * 2) Scanning (noise measurement does not apply to associated channel) + * Use default noise value of -127 ... this is below the range of measurable + * Rx dBm for all agn devices, so it can indicate "unmeasurable" to user. + * Also, -127 works better than 0 when averaging frames with/without + * noise info (e.g. averaging might be done in app); measured dBm values are + * always negative ... using a negative value as the default keeps all + * averages within an s8's (used in some apps) range of negative values. */ +#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) + +/* + * RTS threshold here is total size [2347] minus 4 FCS bytes + * Per spec: + * a value of 0 means RTS on all data/management packets + * a value > max MSDU size means no RTS + * else RTS for data/management frames where MPDU is larger + * than RTS value. + */ +#define DEFAULT_RTS_THRESHOLD 2347U +#define MIN_RTS_THRESHOLD 0U +#define MAX_RTS_THRESHOLD 2347U +#define MAX_MSDU_SIZE 2304U +#define MAX_MPDU_SIZE 2346U +#define DEFAULT_BEACON_INTERVAL 200U +#define DEFAULT_SHORT_RETRY_LIMIT 7U +#define DEFAULT_LONG_RETRY_LIMIT 4U + +#define IWL_NUM_SCAN_RATES (2) + +/* + * One for each channel, holds all channel setup data + * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant + * with one another! + */ +struct iwl_channel_info { + struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */ + struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for + * HT40 channel */ + + u8 channel; /* channel number */ + u8 flags; /* flags copied from EEPROM */ + s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ + s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */ + s8 min_power; /* always 0 */ + s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ + + u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */ + u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */ + enum ieee80211_band band; + + /* HT40 channel info */ + s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ + u8 ht40_flags; /* flags copied from EEPROM */ + u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */ +}; + +/* + * Minimum number of queues. MAX_NUM is defined in hw specific files. + * Set the minimum to accommodate + * - 4 standard TX queues + * - the command queue + * - 4 PAN TX queues + * - the PAN multicast queue, and + * - the AUX (TX during scan dwell) queue. + */ +#define IWL_MIN_NUM_QUEUES 11 + +/* + * Command queue depends on iPAN support. + */ +#define IWL_DEFAULT_CMD_QUEUE_NUM 4 +#define IWL_IPAN_CMD_QUEUE_NUM 9 + +#define IEEE80211_DATA_LEN 2304 +#define IEEE80211_4ADDR_LEN 30 +#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) +#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) + +#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 +#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 +#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 + +#define IWL_SUPPORTED_RATES_IE_LEN 8 + +#define IWL_INVALID_RATE 0xFF +#define IWL_INVALID_VALUE -1 + +union iwl_ht_rate_supp { + u16 rates; + struct { + u8 siso_rate; + u8 mimo_rate; + }; +}; + +#define CFG_HT_RX_AMPDU_FACTOR_8K (0x0) +#define CFG_HT_RX_AMPDU_FACTOR_16K (0x1) +#define CFG_HT_RX_AMPDU_FACTOR_32K (0x2) +#define CFG_HT_RX_AMPDU_FACTOR_64K (0x3) +#define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K +#define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K +#define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K + +/* + * Maximal MPDU density for TX aggregation + * 4 - 2us density + * 5 - 4us density + * 6 - 8us density + * 7 - 16us density + */ +#define CFG_HT_MPDU_DENSITY_2USEC (0x4) +#define CFG_HT_MPDU_DENSITY_4USEC (0x5) +#define CFG_HT_MPDU_DENSITY_8USEC (0x6) +#define CFG_HT_MPDU_DENSITY_16USEC (0x7) +#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC +#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC +#define CFG_HT_MPDU_DENSITY_MIN (0x1) + +struct iwl_ht_config { + bool single_chain_sufficient; + enum ieee80211_smps_mode smps; /* current smps mode */ +}; + +/* QoS structures */ +struct iwl_qos_info { + int qos_active; + struct iwl_qosparam_cmd def_qos_parm; +}; + +/** + * enum iwl_agg_state + * + * The state machine of the BA agreement establishment / tear down. + * These states relate to a specific RA / TID. + * + * @IWL_AGG_OFF: aggregation is not used + * @IWL_AGG_STARTING: aggregation are starting (between start and oper) + * @IWL_AGG_ON: aggregation session is up + * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the + * HW queue to be empty from packets for this RA /TID. + * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the + * HW queue to be empty from packets for this RA /TID. + */ +enum iwl_agg_state { + IWL_AGG_OFF = 0, + IWL_AGG_STARTING, + IWL_AGG_ON, + IWL_EMPTYING_HW_QUEUE_ADDBA, + IWL_EMPTYING_HW_QUEUE_DELBA, +}; + +/** + * struct iwl_ht_agg - aggregation state machine + + * This structs holds the states for the BA agreement establishment and tear + * down. It also holds the state during the BA session itself. This struct is + * duplicated for each RA / TID. + + * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the + * Tx response (REPLY_TX), and the block ack notification + * (REPLY_COMPRESSED_BA). + * @state: state of the BA agreement establishment / tear down. + * @txq_id: Tx queue used by the BA session + * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or + * the first packet to be sent in legacy HW queue in Tx AGG stop flow. + * Basically when next_reclaimed reaches ssn, we can tell mac80211 that + * we are ready to finish the Tx AGG stop / start flow. + * @wait_for_ba: Expect block-ack before next Tx reply + */ +struct iwl_ht_agg { + u32 rate_n_flags; + enum iwl_agg_state state; + u16 txq_id; + u16 ssn; + bool wait_for_ba; +}; + +/** + * struct iwl_tid_data - one for each RA / TID + + * This structs holds the states for each RA / TID. + + * @seq_number: the next WiFi sequence number to use + * @next_reclaimed: the WiFi sequence number of the next packet to be acked. + * This is basically (last acked packet++). + * @agg: aggregation state machine + */ +struct iwl_tid_data { + u16 seq_number; + u16 next_reclaimed; + struct iwl_ht_agg agg; +}; + +/* + * Structure should be accessed with sta_lock held. When station addition + * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only + * the commands (iwl_addsta_cmd and iwl_link_quality_cmd) without sta_lock + * held. + */ +struct iwl_station_entry { + struct iwl_addsta_cmd sta; + u8 used, ctxid; + struct iwl_link_quality_cmd *lq; +}; + +/* + * iwl_station_priv: Driver's private station information + * + * When mac80211 creates a station it reserves some space (hw->sta_data_size) + * in the structure for use by driver. This structure is places in that + * space. + */ +struct iwl_station_priv { + struct iwl_rxon_context *ctx; + struct iwl_lq_sta lq_sta; + atomic_t pending_frames; + bool client; + bool asleep; + u8 max_agg_bufsize; + u8 sta_id; +}; + +/** + * struct iwl_vif_priv - driver's private per-interface information + * + * When mac80211 allocates a virtual interface, it can allocate + * space for us to put data into. + */ +struct iwl_vif_priv { + struct iwl_rxon_context *ctx; + u8 ibss_bssid_sta_id; +}; + +struct iwl_sensitivity_ranges { + u16 min_nrg_cck; + + u16 nrg_th_cck; + u16 nrg_th_ofdm; + + u16 auto_corr_min_ofdm; + u16 auto_corr_min_ofdm_mrc; + u16 auto_corr_min_ofdm_x1; + u16 auto_corr_min_ofdm_mrc_x1; + + u16 auto_corr_max_ofdm; + u16 auto_corr_max_ofdm_mrc; + u16 auto_corr_max_ofdm_x1; + u16 auto_corr_max_ofdm_mrc_x1; + + u16 auto_corr_max_cck; + u16 auto_corr_max_cck_mrc; + u16 auto_corr_min_cck; + u16 auto_corr_min_cck_mrc; + + u16 barker_corr_th_min; + u16 barker_corr_th_min_mrc; + u16 nrg_th_cca; +}; + + +#define KELVIN_TO_CELSIUS(x) ((x)-273) +#define CELSIUS_TO_KELVIN(x) ((x)+273) + + +/****************************************************************************** + * + * Functions implemented in core module which are forward declared here + * for use by iwl-[4-5].c + * + * NOTE: The implementation of these functions are not hardware specific + * which is why they are in the core module files. + * + * Naming convention -- + * iwl_ <-- Is part of iwlwifi + * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) + * + ****************************************************************************/ +extern void iwl_update_chain_flags(struct iwl_priv *priv); +extern const u8 iwl_bcast_addr[ETH_ALEN]; + +#define IWL_OPERATION_MODE_AUTO 0 +#define IWL_OPERATION_MODE_HT_ONLY 1 +#define IWL_OPERATION_MODE_MIXED 2 +#define IWL_OPERATION_MODE_20MHZ 3 + +#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000 + +/* Sensitivity and chain noise calibration */ +#define INITIALIZATION_VALUE 0xFFFF +#define IWL_CAL_NUM_BEACONS 16 +#define MAXIMUM_ALLOWED_PATHLOSS 15 + +#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3 + +#define MAX_FA_OFDM 50 +#define MIN_FA_OFDM 5 +#define MAX_FA_CCK 50 +#define MIN_FA_CCK 5 + +#define AUTO_CORR_STEP_OFDM 1 + +#define AUTO_CORR_STEP_CCK 3 +#define AUTO_CORR_MAX_TH_CCK 160 + +#define NRG_DIFF 2 +#define NRG_STEP_CCK 2 +#define NRG_MARGIN 8 +#define MAX_NUMBER_CCK_NO_FA 100 + +#define AUTO_CORR_CCK_MIN_VAL_DEF (125) + +#define CHAIN_A 0 +#define CHAIN_B 1 +#define CHAIN_C 2 +#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4 +#define ALL_BAND_FILTER 0xFF00 +#define IN_BAND_FILTER 0xFF +#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF + +#define NRG_NUM_PREV_STAT_L 20 +#define NUM_RX_CHAINS 3 + +enum iwlagn_false_alarm_state { + IWL_FA_TOO_MANY = 0, + IWL_FA_TOO_FEW = 1, + IWL_FA_GOOD_RANGE = 2, +}; + +enum iwlagn_chain_noise_state { + IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ + IWL_CHAIN_NOISE_ACCUMULATE, + IWL_CHAIN_NOISE_CALIBRATED, + IWL_CHAIN_NOISE_DONE, +}; + +/* Sensitivity calib data */ +struct iwl_sensitivity_data { + u32 auto_corr_ofdm; + u32 auto_corr_ofdm_mrc; + u32 auto_corr_ofdm_x1; + u32 auto_corr_ofdm_mrc_x1; + u32 auto_corr_cck; + u32 auto_corr_cck_mrc; + + u32 last_bad_plcp_cnt_ofdm; + u32 last_fa_cnt_ofdm; + u32 last_bad_plcp_cnt_cck; + u32 last_fa_cnt_cck; + + u32 nrg_curr_state; + u32 nrg_prev_state; + u32 nrg_value[10]; + u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L]; + u32 nrg_silence_ref; + u32 nrg_energy_idx; + u32 nrg_silence_idx; + u32 nrg_th_cck; + s32 nrg_auto_corr_silence_diff; + u32 num_in_cck_no_fa; + u32 nrg_th_ofdm; + + u16 barker_corr_th_min; + u16 barker_corr_th_min_mrc; + u16 nrg_th_cca; +}; + +/* Chain noise (differential Rx gain) calib data */ +struct iwl_chain_noise_data { + u32 active_chains; + u32 chain_noise_a; + u32 chain_noise_b; + u32 chain_noise_c; + u32 chain_signal_a; + u32 chain_signal_b; + u32 chain_signal_c; + u16 beacon_count; + u8 disconn_array[NUM_RX_CHAINS]; + u8 delta_gain_code[NUM_RX_CHAINS]; + u8 radio_write; + u8 state; +}; + +enum { + MEASUREMENT_READY = (1 << 0), + MEASUREMENT_ACTIVE = (1 << 1), +}; + +enum iwl_nvm_type { + NVM_DEVICE_TYPE_EEPROM = 0, + NVM_DEVICE_TYPE_OTP, +}; + +/* + * Two types of OTP memory access modes + * IWL_OTP_ACCESS_ABSOLUTE - absolute address mode, + * based on physical memory addressing + * IWL_OTP_ACCESS_RELATIVE - relative address mode, + * based on logical memory addressing + */ +enum iwl_access_mode { + IWL_OTP_ACCESS_ABSOLUTE, + IWL_OTP_ACCESS_RELATIVE, +}; + +/* reply_tx_statistics (for _agn devices) */ +struct reply_tx_error_statistics { + u32 pp_delay; + u32 pp_few_bytes; + u32 pp_bt_prio; + u32 pp_quiet_period; + u32 pp_calc_ttak; + u32 int_crossed_retry; + u32 short_limit; + u32 long_limit; + u32 fifo_underrun; + u32 drain_flow; + u32 rfkill_flush; + u32 life_expire; + u32 dest_ps; + u32 host_abort; + u32 bt_retry; + u32 sta_invalid; + u32 frag_drop; + u32 tid_disable; + u32 fifo_flush; + u32 insuff_cf_poll; + u32 fail_hw_drop; + u32 sta_color_mismatch; + u32 unknown; +}; + +/* reply_agg_tx_statistics (for _agn devices) */ +struct reply_agg_tx_error_statistics { + u32 underrun; + u32 bt_prio; + u32 few_bytes; + u32 abort; + u32 last_sent_ttl; + u32 last_sent_try; + u32 last_sent_bt_kill; + u32 scd_query; + u32 bad_crc32; + u32 response; + u32 dump_tx; + u32 delay_tx; + u32 unknown; +}; + +/* + * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds + * to perform continuous uCode event logging operation if enabled + */ +#define UCODE_TRACE_PERIOD (10) + +/* + * iwl_event_log: current uCode event log position + * + * @ucode_trace: enable/disable ucode continuous trace timer + * @num_wraps: how many times the event buffer wraps + * @next_entry: the entry just before the next one that uCode would fill + * @non_wraps_count: counter for no wrap detected when dump ucode events + * @wraps_once_count: counter for wrap once detected when dump ucode events + * @wraps_more_count: counter for wrap more than once detected + * when dump ucode events + */ +struct iwl_event_log { + bool ucode_trace; + u32 num_wraps; + u32 next_entry; + int non_wraps_count; + int wraps_once_count; + int wraps_more_count; +}; + +#define IWL_DELAY_NEXT_FORCE_RF_RESET (HZ*3) + +/* BT Antenna Coupling Threshold (dB) */ +#define IWL_BT_ANTENNA_COUPLING_THRESHOLD (35) + +/* Firmware reload counter and Timestamp */ +#define IWL_MIN_RELOAD_DURATION 1000 /* 1000 ms */ +#define IWL_MAX_CONTINUE_RELOAD_CNT 4 + + +struct iwl_rf_reset { + int reset_request_count; + int reset_success_count; + int reset_reject_count; + unsigned long last_reset_jiffies; +}; + +enum iwl_rxon_context_id { + IWL_RXON_CTX_BSS, + IWL_RXON_CTX_PAN, + + NUM_IWL_RXON_CTX +}; + +/* extend beacon time format bit shifting */ +/* + * for _agn devices + * bits 31:22 - extended + * bits 21:0 - interval + */ +#define IWLAGN_EXT_BEACON_TIME_POS 22 + +struct iwl_rxon_context { + struct ieee80211_vif *vif; + + u8 mcast_queue; + u8 ac_to_queue[IEEE80211_NUM_ACS]; + u8 ac_to_fifo[IEEE80211_NUM_ACS]; + + /* + * We could use the vif to indicate active, but we + * also need it to be active during disabling when + * we already removed the vif for type setting. + */ + bool always_active, is_active; + + bool ht_need_multiple_chains; + + enum iwl_rxon_context_id ctxid; + + u32 interface_modes, exclusive_interface_modes; + u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype; + + /* + * We declare this const so it can only be + * changed via explicit cast within the + * routines that actually update the physical + * hardware. + */ + const struct iwl_rxon_cmd active; + struct iwl_rxon_cmd staging; + + struct iwl_rxon_time_cmd timing; + + struct iwl_qos_info qos_data; + + u8 bcast_sta_id, ap_sta_id; + + u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd; + u8 qos_cmd; + u8 wep_key_cmd; + + struct iwl_wep_key wep_keys[WEP_KEYS_MAX]; + u8 key_mapping_keys; + + __le32 station_flags; + + int beacon_int; + + struct { + bool non_gf_sta_present; + u8 protection; + bool enabled, is_40mhz; + u8 extension_chan_offset; + } ht; +}; + +enum iwl_scan_type { + IWL_SCAN_NORMAL, + IWL_SCAN_RADIO_RESET, + IWL_SCAN_ROC, +}; + +/** + * struct iwl_hw_params + * + * Holds the module parameters + * + * @tx_chains_num: Number of TX chains + * @rx_chains_num: Number of RX chains + * @valid_tx_ant: usable antennas for TX + * @valid_rx_ant: usable antennas for RX + * @ht40_channel: is 40MHz width possible: BIT(IEEE80211_BAND_XXX) + * @sku: sku read from EEPROM + * @ct_kill_threshold: temperature threshold - in hw dependent unit + * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit + * relevant for 1000, 6000 and up + * @struct iwl_sensitivity_ranges: range of sensitivity values + * @use_rts_for_aggregation: use rts/cts protection for HT traffic + */ +struct iwl_hw_params { + u8 tx_chains_num; + u8 rx_chains_num; + u8 valid_tx_ant; + u8 valid_rx_ant; + u8 ht40_channel; + bool use_rts_for_aggregation; + u16 sku; + u32 ct_kill_threshold; + u32 ct_kill_exit_threshold; + + const struct iwl_sensitivity_ranges *sens; +}; + +struct iwl_lib_ops { + /* set hw dependent parameters */ + void (*set_hw_params)(struct iwl_priv *priv); + int (*set_channel_switch)(struct iwl_priv *priv, + struct ieee80211_channel_switch *ch_switch); + /* device specific configuration */ + void (*nic_config)(struct iwl_priv *priv); + + /* eeprom operations (as defined in eeprom.h) */ + struct iwl_eeprom_ops eeprom_ops; + + /* temperature */ + void (*temperature)(struct iwl_priv *priv); +}; + +#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE +struct iwl_testmode_trace { + u32 buff_size; + u32 total_size; + u32 num_chunks; + u8 *cpu_addr; + u8 *trace_addr; + dma_addr_t dma_addr; + bool trace_enabled; +}; +struct iwl_testmode_mem { + u32 buff_size; + u32 num_chunks; + u8 *buff_addr; + bool read_in_progress; +}; +#endif + +struct iwl_wipan_noa_data { + struct rcu_head rcu_head; + u32 length; + u8 data[]; +}; + +/* Calibration disabling bit mask */ +enum { + IWL_CALIB_ENABLE_ALL = 0, + + IWL_SENSITIVITY_CALIB_DISABLED = BIT(0), + IWL_CHAIN_NOISE_CALIB_DISABLED = BIT(1), + IWL_TX_POWER_CALIB_DISABLED = BIT(2), + + IWL_CALIB_DISABLE_ALL = 0xFFFFFFFF, +}; + +#define IWL_OP_MODE_GET_DVM(_iwl_op_mode) \ + ((struct iwl_priv *) ((_iwl_op_mode)->op_mode_specific)) + +#define IWL_MAC80211_GET_DVM(_hw) \ + ((struct iwl_priv *) ((struct iwl_op_mode *) \ + (_hw)->priv)->op_mode_specific) + +struct iwl_priv { + + struct iwl_trans *trans; + struct device *dev; /* for debug prints only */ + const struct iwl_cfg *cfg; + const struct iwl_fw *fw; + const struct iwl_lib_ops *lib; + unsigned long status; + + spinlock_t sta_lock; + struct mutex mutex; + + unsigned long transport_queue_stop; + bool passive_no_rx; +#define IWL_INVALID_MAC80211_QUEUE 0xff + u8 queue_to_mac80211[IWL_MAX_HW_QUEUES]; + atomic_t queue_stop_count[IWL_MAX_HW_QUEUES]; + + unsigned long agg_q_alloc[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)]; + + /* ieee device used by generic ieee processing code */ + struct ieee80211_hw *hw; + struct ieee80211_channel *ieee_channels; + struct ieee80211_rate *ieee_rates; + + struct list_head calib_results; + + struct workqueue_struct *workqueue; + + struct iwl_hw_params hw_params; + + enum ieee80211_band band; + u8 valid_contexts; + + void (*pre_rx_handler)(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb); + int (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv, + struct iwl_rx_cmd_buffer *rxb, + struct iwl_device_cmd *cmd); + + struct iwl_notif_wait_data notif_wait; + + struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; + + /* spectrum measurement report caching */ + struct iwl_spectrum_notification measure_report; + u8 measurement_status; + +#define IWL_OWNERSHIP_DRIVER 0 +#define IWL_OWNERSHIP_TM 1 + u8 ucode_owner; + + /* ucode beacon time */ + u32 ucode_beacon_time; + int missed_beacon_threshold; + + /* track IBSS manager (last beacon) status */ + u32 ibss_manager; + + /* jiffies when last recovery from statistics was performed */ + unsigned long rx_statistics_jiffies; + + /*counters */ + u32 rx_handlers_stats[REPLY_MAX]; + + /* rf reset */ + struct iwl_rf_reset rf_reset; + + /* firmware reload counter and timestamp */ + unsigned long reload_jiffies; + int reload_count; + bool ucode_loaded; + bool init_ucode_run; /* Don't run init uCode again */ + + /* we allocate array of iwl_channel_info for NIC's valid channels. + * Access via channel # using indirect index array */ + struct iwl_channel_info *channel_info; /* channel info array */ + u8 channel_count; /* # of channels */ + + u8 plcp_delta_threshold; + + /* thermal calibration */ + s32 temperature; /* Celsius */ + s32 last_temperature; + + struct iwl_wipan_noa_data __rcu *noa_data; + + /* Scan related variables */ + unsigned long scan_start; + unsigned long scan_start_tsf; + void *scan_cmd; + enum ieee80211_band scan_band; + struct cfg80211_scan_request *scan_request; + struct ieee80211_vif *scan_vif; + enum iwl_scan_type scan_type; + u8 scan_tx_ant[IEEE80211_NUM_BANDS]; + u8 mgmt_tx_ant; + + /* max number of station keys */ + u8 sta_key_max_num; + + bool new_scan_threshold_behaviour; + + bool wowlan; + + /* EEPROM MAC addresses */ + struct mac_address addresses[2]; + + struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX]; + + __le16 switch_channel; + + u8 start_calib; + struct iwl_sensitivity_data sensitivity_data; + struct iwl_chain_noise_data chain_noise_data; + __le16 sensitivity_tbl[HD_TABLE_SIZE]; + __le16 enhance_sensitivity_tbl[ENHANCE_HD_TABLE_ENTRIES]; + + struct iwl_ht_config current_ht_config; + + /* Rate scaling data */ + u8 retry_rate; + + int activity_timer_active; + + struct iwl_power_mgr power_data; + struct iwl_tt_mgmt thermal_throttle; + + /* station table variables */ + int num_stations; + struct iwl_station_entry stations[IWLAGN_STATION_COUNT]; + unsigned long ucode_key_table; + struct iwl_tid_data tid_data[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT]; + atomic_t num_aux_in_flight; + + u8 mac80211_registered; + + /* Indication if ieee80211_ops->open has been called */ + u8 is_open; + + enum nl80211_iftype iw_mode; + + /* Last Rx'd beacon timestamp */ + u64 timestamp; + + struct { + __le32 flag; + struct statistics_general_common common; + struct statistics_rx_non_phy rx_non_phy; + struct statistics_rx_phy rx_ofdm; + struct statistics_rx_ht_phy rx_ofdm_ht; + struct statistics_rx_phy rx_cck; + struct statistics_tx tx; +#ifdef CONFIG_IWLWIFI_DEBUGFS + struct statistics_bt_activity bt_activity; + __le32 num_bt_kills, accum_num_bt_kills; +#endif + spinlock_t lock; + } statistics; +#ifdef CONFIG_IWLWIFI_DEBUGFS + struct { + struct statistics_general_common common; + struct statistics_rx_non_phy rx_non_phy; + struct statistics_rx_phy rx_ofdm; + struct statistics_rx_ht_phy rx_ofdm_ht; + struct statistics_rx_phy rx_cck; + struct statistics_tx tx; + struct statistics_bt_activity bt_activity; + } accum_stats, delta_stats, max_delta_stats; +#endif + + /* + * reporting the number of tids has AGG on. 0 means + * no AGGREGATION + */ + u8 agg_tids_count; + + struct iwl_rx_phy_res last_phy_res; + bool last_phy_res_valid; + + /* + * chain noise reset and gain commands are the + * two extra calibration commands follows the standard + * phy calibration commands + */ + u8 phy_calib_chain_noise_reset_cmd; + u8 phy_calib_chain_noise_gain_cmd; + + /* counts reply_tx error */ + struct reply_tx_error_statistics reply_tx_stats; + struct reply_agg_tx_error_statistics reply_agg_tx_stats; + + /* remain-on-channel offload support */ + struct ieee80211_channel *hw_roc_channel; + struct delayed_work hw_roc_disable_work; + enum nl80211_channel_type hw_roc_chantype; + int hw_roc_duration; + bool hw_roc_setup, hw_roc_start_notified; + + /* bt coex */ + u8 bt_enable_flag; + u8 bt_status; + u8 bt_traffic_load, last_bt_traffic_load; + bool bt_ch_announce; + bool bt_full_concurrent; + bool bt_ant_couple_ok; + __le32 kill_ack_mask; + __le32 kill_cts_mask; + __le16 bt_valid; + bool reduced_txpower; + u16 bt_on_thresh; + u16 bt_duration; + u16 dynamic_frag_thresh; + u8 bt_ci_compliance; + struct work_struct bt_traffic_change_work; + bool bt_enable_pspoll; + struct iwl_rxon_context *cur_rssi_ctx; + bool bt_is_sco; + + struct work_struct restart; + struct work_struct scan_completed; + struct work_struct abort_scan; + + struct work_struct beacon_update; + struct iwl_rxon_context *beacon_ctx; + struct sk_buff *beacon_skb; + void *beacon_cmd; + + struct work_struct tt_work; + struct work_struct ct_enter; + struct work_struct ct_exit; + struct work_struct start_internal_scan; + struct work_struct tx_flush; + struct work_struct bt_full_concurrency; + struct work_struct bt_runtime_config; + + struct delayed_work scan_check; + + /* TX Power */ + s8 tx_power_user_lmt; + s8 tx_power_device_lmt; + s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */ + s8 tx_power_next; + +#ifdef CONFIG_IWLWIFI_DEBUGFS + /* debugfs */ + struct dentry *debugfs_dir; + u32 dbgfs_sram_offset, dbgfs_sram_len; + bool disable_ht40; + void *wowlan_sram; +#endif /* CONFIG_IWLWIFI_DEBUGFS */ + + /* eeprom -- this is in the card's little endian byte order */ + u8 *eeprom; + enum iwl_nvm_type nvm_device_type; + + struct work_struct txpower_work; + u32 calib_disabled; + struct work_struct run_time_calib_work; + struct timer_list statistics_periodic; + struct timer_list ucode_trace; + + struct iwl_event_log event_log; + + struct led_classdev led; + unsigned long blink_on, blink_off; + bool led_registered; +#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE + struct iwl_testmode_trace testmode_trace; + struct iwl_testmode_mem testmode_mem; + u32 tm_fixed_rate; +#endif + + /* WoWLAN GTK rekey data */ + u8 kck[NL80211_KCK_LEN], kek[NL80211_KEK_LEN]; + __le64 replay_ctr; + __le16 last_seq_ctl; + bool have_rekey_data; + + /* device_pointers: pointers to ucode event tables */ + struct { + u32 error_event_table; + u32 log_event_table; + } device_pointers; + + /* indicator of loaded ucode image */ + enum iwl_ucode_type cur_ucode; +}; /*iwl_priv */ + +extern struct kmem_cache *iwl_tx_cmd_pool; + +static inline struct iwl_rxon_context * +iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif) +{ + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + + return vif_priv->ctx; +} + +#define for_each_context(priv, ctx) \ + for (ctx = &priv->contexts[IWL_RXON_CTX_BSS]; \ + ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++) \ + if (priv->valid_contexts & BIT(ctx->ctxid)) + +static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx) +{ + return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; +} + +static inline int iwl_is_associated(struct iwl_priv *priv, + enum iwl_rxon_context_id ctxid) +{ + return iwl_is_associated_ctx(&priv->contexts[ctxid]); +} + +static inline int iwl_is_any_associated(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx; + for_each_context(priv, ctx) + if (iwl_is_associated_ctx(ctx)) + return true; + return false; +} + +static inline int is_channel_valid(const struct iwl_channel_info *ch_info) +{ + if (ch_info == NULL) + return 0; + return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; +} + +static inline int is_channel_radar(const struct iwl_channel_info *ch_info) +{ + return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; +} + +static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info) +{ + return ch_info->band == IEEE80211_BAND_5GHZ; +} + +static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info) +{ + return ch_info->band == IEEE80211_BAND_2GHZ; +} + +static inline int is_channel_passive(const struct iwl_channel_info *ch) +{ + return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0; +} + +static inline int is_channel_ibss(const struct iwl_channel_info *ch) +{ + return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0; +} + +#endif /* __iwl_dev_h__ */ |