diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-3945-hw.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-3945-hw.h | 294 |
1 files changed, 294 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h new file mode 100644 index 000000000000..65b5834da28c --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h @@ -0,0 +1,294 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +/* + * Please use this file (iwl-3945-hw.h) only for hardware-related definitions. + * Please use iwl-commands.h for uCode API definitions. + * Please use iwl-3945.h for driver implementation definitions. + */ + +#ifndef __iwl_3945_hw__ +#define __iwl_3945_hw__ + +#include "iwl-eeprom.h" + +/* RSSI to dBm */ +#define IWL39_RSSI_OFFSET 95 + +#define IWL_DEFAULT_TX_POWER 0x0F + +/* + * EEPROM related constants, enums, and structures. + */ +#define EEPROM_SKU_CAP_OP_MODE_MRC (1 << 7) + +/* + * Mapping of a Tx power level, at factory calibration temperature, + * to a radio/DSP gain table index. + * One for each of 5 "sample" power levels in each band. + * v_det is measured at the factory, using the 3945's built-in power amplifier + * (PA) output voltage detector. This same detector is used during Tx of + * long packets in normal operation to provide feedback as to proper output + * level. + * Data copied from EEPROM. + * DO NOT ALTER THIS STRUCTURE!!! + */ +struct iwl3945_eeprom_txpower_sample { + u8 gain_index; /* index into power (gain) setup table ... */ + s8 power; /* ... for this pwr level for this chnl group */ + u16 v_det; /* PA output voltage */ +} __packed; + +/* + * Mappings of Tx power levels -> nominal radio/DSP gain table indexes. + * One for each channel group (a.k.a. "band") (1 for BG, 4 for A). + * Tx power setup code interpolates between the 5 "sample" power levels + * to determine the nominal setup for a requested power level. + * Data copied from EEPROM. + * DO NOT ALTER THIS STRUCTURE!!! + */ +struct iwl3945_eeprom_txpower_group { + struct iwl3945_eeprom_txpower_sample samples[5]; /* 5 power levels */ + s32 a, b, c, d, e; /* coefficients for voltage->power + * formula (signed) */ + s32 Fa, Fb, Fc, Fd, Fe; /* these modify coeffs based on + * frequency (signed) */ + s8 saturation_power; /* highest power possible by h/w in this + * band */ + u8 group_channel; /* "representative" channel # in this band */ + s16 temperature; /* h/w temperature at factory calib this band + * (signed) */ +} __packed; + +/* + * Temperature-based Tx-power compensation data, not band-specific. + * These coefficients are use to modify a/b/c/d/e coeffs based on + * difference between current temperature and factory calib temperature. + * Data copied from EEPROM. + */ +struct iwl3945_eeprom_temperature_corr { + u32 Ta; + u32 Tb; + u32 Tc; + u32 Td; + u32 Te; +} __packed; + +/* + * EEPROM map + */ +struct iwl3945_eeprom { + u8 reserved0[16]; + u16 device_id; /* abs.ofs: 16 */ + u8 reserved1[2]; + u16 pmc; /* abs.ofs: 20 */ + u8 reserved2[20]; + u8 mac_address[6]; /* abs.ofs: 42 */ + u8 reserved3[58]; + u16 board_revision; /* abs.ofs: 106 */ + u8 reserved4[11]; + u8 board_pba_number[9]; /* abs.ofs: 119 */ + u8 reserved5[8]; + u16 version; /* abs.ofs: 136 */ + u8 sku_cap; /* abs.ofs: 138 */ + u8 leds_mode; /* abs.ofs: 139 */ + u16 oem_mode; + u16 wowlan_mode; /* abs.ofs: 142 */ + u16 leds_time_interval; /* abs.ofs: 144 */ + u8 leds_off_time; /* abs.ofs: 146 */ + u8 leds_on_time; /* abs.ofs: 147 */ + u8 almgor_m_version; /* abs.ofs: 148 */ + u8 antenna_switch_type; /* abs.ofs: 149 */ + u8 reserved6[42]; + u8 sku_id[4]; /* abs.ofs: 192 */ + +/* + * Per-channel regulatory data. + * + * Each channel that *might* be supported by 3945 or 4965 has a fixed location + * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory + * txpower (MSB). + * + * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz) + * channels (only for 4965, not supported by 3945) appear later in the EEPROM. + * + * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 + */ + u16 band_1_count; /* abs.ofs: 196 */ + struct iwl_eeprom_channel band_1_channels[14]; /* abs.ofs: 198 */ + +/* + * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196, + * 5.0 GHz channels 7, 8, 11, 12, 16 + * (4915-5080MHz) (none of these is ever supported) + */ + u16 band_2_count; /* abs.ofs: 226 */ + struct iwl_eeprom_channel band_2_channels[13]; /* abs.ofs: 228 */ + +/* + * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 + * (5170-5320MHz) + */ + u16 band_3_count; /* abs.ofs: 254 */ + struct iwl_eeprom_channel band_3_channels[12]; /* abs.ofs: 256 */ + +/* + * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 + * (5500-5700MHz) + */ + u16 band_4_count; /* abs.ofs: 280 */ + struct iwl_eeprom_channel band_4_channels[11]; /* abs.ofs: 282 */ + +/* + * 5.7 GHz channels 145, 149, 153, 157, 161, 165 + * (5725-5825MHz) + */ + u16 band_5_count; /* abs.ofs: 304 */ + struct iwl_eeprom_channel band_5_channels[6]; /* abs.ofs: 306 */ + + u8 reserved9[194]; + +/* + * 3945 Txpower calibration data. + */ +#define IWL_NUM_TX_CALIB_GROUPS 5 + struct iwl3945_eeprom_txpower_group groups[IWL_NUM_TX_CALIB_GROUPS]; +/* abs.ofs: 512 */ + struct iwl3945_eeprom_temperature_corr corrections; /* abs.ofs: 832 */ + u8 reserved16[172]; /* fill out to full 1024 byte block */ +} __packed; + +#define IWL3945_EEPROM_IMG_SIZE 1024 + +/* End of EEPROM */ + +#define PCI_CFG_REV_ID_BIT_BASIC_SKU (0x40) /* bit 6 */ +#define PCI_CFG_REV_ID_BIT_RTP (0x80) /* bit 7 */ + +/* 4 DATA + 1 CMD. There are 2 HCCA queues that are not used. */ +#define IWL39_NUM_QUEUES 5 +#define IWL39_CMD_QUEUE_NUM 4 + +#define IWL_DEFAULT_TX_RETRY 15 + +/*********************************************/ + +#define RFD_SIZE 4 +#define NUM_TFD_CHUNKS 4 + +#define RX_QUEUE_SIZE 256 +#define RX_QUEUE_MASK 255 +#define RX_QUEUE_SIZE_LOG 8 + +#define U32_PAD(n) ((4-(n))&0x3) + +#define TFD_CTL_COUNT_SET(n) (n << 24) +#define TFD_CTL_COUNT_GET(ctl) ((ctl >> 24) & 7) +#define TFD_CTL_PAD_SET(n) (n << 28) +#define TFD_CTL_PAD_GET(ctl) (ctl >> 28) + +/* Sizes and addresses for instruction and data memory (SRAM) in + * 3945's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */ +#define IWL39_RTC_INST_LOWER_BOUND (0x000000) +#define IWL39_RTC_INST_UPPER_BOUND (0x014000) + +#define IWL39_RTC_DATA_LOWER_BOUND (0x800000) +#define IWL39_RTC_DATA_UPPER_BOUND (0x808000) + +#define IWL39_RTC_INST_SIZE (IWL39_RTC_INST_UPPER_BOUND - \ + IWL39_RTC_INST_LOWER_BOUND) +#define IWL39_RTC_DATA_SIZE (IWL39_RTC_DATA_UPPER_BOUND - \ + IWL39_RTC_DATA_LOWER_BOUND) + +#define IWL39_MAX_INST_SIZE IWL39_RTC_INST_SIZE +#define IWL39_MAX_DATA_SIZE IWL39_RTC_DATA_SIZE + +/* Size of uCode instruction memory in bootstrap state machine */ +#define IWL39_MAX_BSM_SIZE IWL39_RTC_INST_SIZE + +static inline int iwl3945_hw_valid_rtc_data_addr(u32 addr) +{ + return (addr >= IWL39_RTC_DATA_LOWER_BOUND) && + (addr < IWL39_RTC_DATA_UPPER_BOUND); +} + +/* Base physical address of iwl3945_shared is provided to FH_TSSR_CBB_BASE + * and &iwl3945_shared.rx_read_ptr[0] is provided to FH_RCSR_RPTR_ADDR(0) */ +struct iwl3945_shared { + __le32 tx_base_ptr[8]; +} __packed; + +static inline u8 iwl3945_hw_get_rate(__le16 rate_n_flags) +{ + return le16_to_cpu(rate_n_flags) & 0xFF; +} + +static inline u16 iwl3945_hw_get_rate_n_flags(__le16 rate_n_flags) +{ + return le16_to_cpu(rate_n_flags); +} + +static inline __le16 iwl3945_hw_set_rate_n_flags(u8 rate, u16 flags) +{ + return cpu_to_le16((u16)rate|flags); +} +#endif |