diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl3945-base.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl3945-base.c | 4327 |
1 files changed, 0 insertions, 4327 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c deleted file mode 100644 index 371abbf60eac..000000000000 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ /dev/null @@ -1,4327 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/pci-aspm.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/wireless.h> -#include <linux/firmware.h> -#include <linux/etherdevice.h> -#include <linux/if_arp.h> - -#include <net/ieee80211_radiotap.h> -#include <net/mac80211.h> - -#include <asm/div64.h> - -#define DRV_NAME "iwl3945" - -#include "iwl-fh.h" -#include "iwl-3945-fh.h" -#include "iwl-commands.h" -#include "iwl-sta.h" -#include "iwl-3945.h" -#include "iwl-core.h" -#include "iwl-helpers.h" -#include "iwl-dev.h" -#include "iwl-spectrum.h" -#include "iwl-legacy.h" - -/* - * module name, copyright, version, etc. - */ - -#define DRV_DESCRIPTION \ -"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux" - -#ifdef CONFIG_IWLWIFI_DEBUG -#define VD "d" -#else -#define VD -#endif - -/* - * add "s" to indicate spectrum measurement included. - * we add it here to be consistent with previous releases in which - * this was configurable. - */ -#define DRV_VERSION IWLWIFI_VERSION VD "s" -#define DRV_COPYRIGHT "Copyright(c) 2003-2010 Intel Corporation" -#define DRV_AUTHOR "<ilw@linux.intel.com>" - -MODULE_DESCRIPTION(DRV_DESCRIPTION); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); -MODULE_LICENSE("GPL"); - - /* module parameters */ -struct iwl_mod_params iwl3945_mod_params = { - .sw_crypto = 1, - .restart_fw = 1, - /* the rest are 0 by default */ -}; - -/** - * iwl3945_get_antenna_flags - Get antenna flags for RXON command - * @priv: eeprom and antenna fields are used to determine antenna flags - * - * priv->eeprom39 is used to determine if antenna AUX/MAIN are reversed - * iwl3945_mod_params.antenna specifies the antenna diversity mode: - * - * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself - * IWL_ANTENNA_MAIN - Force MAIN antenna - * IWL_ANTENNA_AUX - Force AUX antenna - */ -__le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv) -{ - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - - switch (iwl3945_mod_params.antenna) { - case IWL_ANTENNA_DIVERSITY: - return 0; - - case IWL_ANTENNA_MAIN: - if (eeprom->antenna_switch_type) - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; - - case IWL_ANTENNA_AUX: - if (eeprom->antenna_switch_type) - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; - } - - /* bad antenna selector value */ - IWL_ERR(priv, "Bad antenna selector value (0x%x)\n", - iwl3945_mod_params.antenna); - - return 0; /* "diversity" is default if error */ -} - -static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv, - struct ieee80211_key_conf *keyconf, - u8 sta_id) -{ - unsigned long flags; - __le16 key_flags = 0; - int ret; - - key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - - if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id) - key_flags |= STA_KEY_MULTICAST_MSK; - - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - keyconf->hw_key_idx = keyconf->keyidx; - key_flags &= ~STA_KEY_FLG_INVALID; - - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].keyinfo.cipher = keyconf->cipher; - priv->stations[sta_id].keyinfo.keylen = keyconf->keylen; - memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, - keyconf->keylen); - - memcpy(priv->stations[sta_id].sta.key.key, keyconf->key, - keyconf->keylen); - - if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) - == STA_KEY_FLG_NO_ENC) - priv->stations[sta_id].sta.key.key_offset = - iwl_get_free_ucode_key_index(priv); - /* else, we are overriding an existing key => no need to allocated room - * in uCode. */ - - WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, - "no space for a new key"); - - priv->stations[sta_id].sta.key.key_flags = key_flags; - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - - IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n"); - - ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); - - spin_unlock_irqrestore(&priv->sta_lock, flags); - - return ret; -} - -static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv *priv, - struct ieee80211_key_conf *keyconf, - u8 sta_id) -{ - return -EOPNOTSUPP; -} - -static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv *priv, - struct ieee80211_key_conf *keyconf, - u8 sta_id) -{ - return -EOPNOTSUPP; -} - -static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id) -{ - unsigned long flags; - struct iwl_addsta_cmd sta_cmd; - - spin_lock_irqsave(&priv->sta_lock, flags); - memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key)); - memset(&priv->stations[sta_id].sta.key, 0, - sizeof(struct iwl4965_keyinfo)); - priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC; - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd)); - spin_unlock_irqrestore(&priv->sta_lock, flags); - - IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n"); - return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); -} - -static int iwl3945_set_dynamic_key(struct iwl_priv *priv, - struct ieee80211_key_conf *keyconf, u8 sta_id) -{ - int ret = 0; - - keyconf->hw_key_idx = HW_KEY_DYNAMIC; - - switch (keyconf->cipher) { - case WLAN_CIPHER_SUITE_CCMP: - ret = iwl3945_set_ccmp_dynamic_key_info(priv, keyconf, sta_id); - break; - case WLAN_CIPHER_SUITE_TKIP: - ret = iwl3945_set_tkip_dynamic_key_info(priv, keyconf, sta_id); - break; - case WLAN_CIPHER_SUITE_WEP40: - case WLAN_CIPHER_SUITE_WEP104: - ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id); - break; - default: - IWL_ERR(priv, "Unknown alg: %s alg=%x\n", __func__, - keyconf->cipher); - ret = -EINVAL; - } - - IWL_DEBUG_WEP(priv, "Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n", - keyconf->cipher, keyconf->keylen, keyconf->keyidx, - sta_id, ret); - - return ret; -} - -static int iwl3945_remove_static_key(struct iwl_priv *priv) -{ - int ret = -EOPNOTSUPP; - - return ret; -} - -static int iwl3945_set_static_key(struct iwl_priv *priv, - struct ieee80211_key_conf *key) -{ - if (key->cipher == WLAN_CIPHER_SUITE_WEP40 || - key->cipher == WLAN_CIPHER_SUITE_WEP104) - return -EOPNOTSUPP; - - IWL_ERR(priv, "Static key invalid: cipher %x\n", key->cipher); - return -EINVAL; -} - -static void iwl3945_clear_free_frames(struct iwl_priv *priv) -{ - struct list_head *element; - - IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n", - priv->frames_count); - - while (!list_empty(&priv->free_frames)) { - element = priv->free_frames.next; - list_del(element); - kfree(list_entry(element, struct iwl3945_frame, list)); - priv->frames_count--; - } - - if (priv->frames_count) { - IWL_WARN(priv, "%d frames still in use. Did we lose one?\n", - priv->frames_count); - priv->frames_count = 0; - } -} - -static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl_priv *priv) -{ - struct iwl3945_frame *frame; - struct list_head *element; - if (list_empty(&priv->free_frames)) { - frame = kzalloc(sizeof(*frame), GFP_KERNEL); - if (!frame) { - IWL_ERR(priv, "Could not allocate frame!\n"); - return NULL; - } - - priv->frames_count++; - return frame; - } - - element = priv->free_frames.next; - list_del(element); - return list_entry(element, struct iwl3945_frame, list); -} - -static void iwl3945_free_frame(struct iwl_priv *priv, struct iwl3945_frame *frame) -{ - memset(frame, 0, sizeof(*frame)); - list_add(&frame->list, &priv->free_frames); -} - -unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - int left) -{ - - if (!iwl_is_associated(priv, IWL_RXON_CTX_BSS) || !priv->beacon_skb) - return 0; - - if (priv->beacon_skb->len > left) - return 0; - - memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len); - - return priv->beacon_skb->len; -} - -static int iwl3945_send_beacon_cmd(struct iwl_priv *priv) -{ - struct iwl3945_frame *frame; - unsigned int frame_size; - int rc; - u8 rate; - - frame = iwl3945_get_free_frame(priv); - - if (!frame) { - IWL_ERR(priv, "Could not obtain free frame buffer for beacon " - "command.\n"); - return -ENOMEM; - } - - rate = iwl_rate_get_lowest_plcp(priv, - &priv->contexts[IWL_RXON_CTX_BSS]); - - frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate); - - rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, - &frame->u.cmd[0]); - - iwl3945_free_frame(priv, frame); - - return rc; -} - -static void iwl3945_unset_hw_params(struct iwl_priv *priv) -{ - if (priv->_3945.shared_virt) - dma_free_coherent(&priv->pci_dev->dev, - sizeof(struct iwl3945_shared), - priv->_3945.shared_virt, - priv->_3945.shared_phys); -} - -static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv, - struct ieee80211_tx_info *info, - struct iwl_device_cmd *cmd, - struct sk_buff *skb_frag, - int sta_id) -{ - struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload; - struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo; - - tx_cmd->sec_ctl = 0; - - switch (keyinfo->cipher) { - case WLAN_CIPHER_SUITE_CCMP: - tx_cmd->sec_ctl = TX_CMD_SEC_CCM; - memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen); - IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n"); - break; - - case WLAN_CIPHER_SUITE_TKIP: - break; - - case WLAN_CIPHER_SUITE_WEP104: - tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; - /* fall through */ - case WLAN_CIPHER_SUITE_WEP40: - tx_cmd->sec_ctl |= TX_CMD_SEC_WEP | - (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT; - - memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen); - - IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption " - "with key %d\n", info->control.hw_key->hw_key_idx); - break; - - default: - IWL_ERR(priv, "Unknown encode cipher %x\n", keyinfo->cipher); - break; - } -} - -/* - * handle build REPLY_TX command notification. - */ -static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv, - struct iwl_device_cmd *cmd, - struct ieee80211_tx_info *info, - struct ieee80211_hdr *hdr, u8 std_id) -{ - struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload; - __le32 tx_flags = tx_cmd->tx_flags; - __le16 fc = hdr->frame_control; - - tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { - tx_flags |= TX_CMD_FLG_ACK_MSK; - if (ieee80211_is_mgmt(fc)) - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - if (ieee80211_is_probe_resp(fc) && - !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) - tx_flags |= TX_CMD_FLG_TSF_MSK; - } else { - tx_flags &= (~TX_CMD_FLG_ACK_MSK); - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - } - - tx_cmd->sta_id = std_id; - if (ieee80211_has_morefrags(fc)) - tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; - - if (ieee80211_is_data_qos(fc)) { - u8 *qc = ieee80211_get_qos_ctl(hdr); - tx_cmd->tid_tspec = qc[0] & 0xf; - tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; - } else { - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - } - - priv->cfg->ops->utils->tx_cmd_protection(priv, info, fc, &tx_flags); - - tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); - if (ieee80211_is_mgmt(fc)) { - if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) - tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); - else - tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); - } else { - tx_cmd->timeout.pm_frame_timeout = 0; - } - - tx_cmd->driver_txop = 0; - tx_cmd->tx_flags = tx_flags; - tx_cmd->next_frame_len = 0; -} - -/* - * start REPLY_TX command process - */ -static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct iwl3945_tx_cmd *tx_cmd; - struct iwl_tx_queue *txq = NULL; - struct iwl_queue *q = NULL; - struct iwl_device_cmd *out_cmd; - struct iwl_cmd_meta *out_meta; - dma_addr_t phys_addr; - dma_addr_t txcmd_phys; - int txq_id = skb_get_queue_mapping(skb); - u16 len, idx, hdr_len; - u8 id; - u8 unicast; - u8 sta_id; - u8 tid = 0; - __le16 fc; - u8 wait_write_ptr = 0; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n"); - goto drop_unlock; - } - - if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) { - IWL_ERR(priv, "ERROR: No TX rate available.\n"); - goto drop_unlock; - } - - unicast = !is_multicast_ether_addr(hdr->addr1); - id = 0; - - fc = hdr->frame_control; - -#ifdef CONFIG_IWLWIFI_DEBUG - if (ieee80211_is_auth(fc)) - IWL_DEBUG_TX(priv, "Sending AUTH frame\n"); - else if (ieee80211_is_assoc_req(fc)) - IWL_DEBUG_TX(priv, "Sending ASSOC frame\n"); - else if (ieee80211_is_reassoc_req(fc)) - IWL_DEBUG_TX(priv, "Sending REASSOC frame\n"); -#endif - - spin_unlock_irqrestore(&priv->lock, flags); - - hdr_len = ieee80211_hdrlen(fc); - - /* Find index into station table for destination station */ - sta_id = iwl_sta_id_or_broadcast( - priv, &priv->contexts[IWL_RXON_CTX_BSS], - info->control.sta); - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n", - hdr->addr1); - goto drop; - } - - IWL_DEBUG_RATE(priv, "station Id %d\n", sta_id); - - if (ieee80211_is_data_qos(fc)) { - u8 *qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; - if (unlikely(tid >= MAX_TID_COUNT)) - goto drop; - } - - /* Descriptor for chosen Tx queue */ - txq = &priv->txq[txq_id]; - q = &txq->q; - - if ((iwl_queue_space(q) < q->high_mark)) - goto drop; - - spin_lock_irqsave(&priv->lock, flags); - - idx = get_cmd_index(q, q->write_ptr, 0); - - /* Set up driver data for this TFD */ - memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info)); - txq->txb[q->write_ptr].skb = skb; - txq->txb[q->write_ptr].ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - /* Init first empty entry in queue's array of Tx/cmd buffers */ - out_cmd = txq->cmd[idx]; - out_meta = &txq->meta[idx]; - tx_cmd = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload; - memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); - memset(tx_cmd, 0, sizeof(*tx_cmd)); - - /* - * Set up the Tx-command (not MAC!) header. - * Store the chosen Tx queue and TFD index within the sequence field; - * after Tx, uCode's Tx response will return this value so driver can - * locate the frame within the tx queue and do post-tx processing. - */ - out_cmd->hdr.cmd = REPLY_TX; - out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) | - INDEX_TO_SEQ(q->write_ptr))); - - /* Copy MAC header from skb into command buffer */ - memcpy(tx_cmd->hdr, hdr, hdr_len); - - - if (info->control.hw_key) - iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id); - - /* TODO need this for burst mode later on */ - iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id); - - /* set is_hcca to 0; it probably will never be implemented */ - iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0); - - /* Total # bytes to be transmitted */ - len = (u16)skb->len; - tx_cmd->len = cpu_to_le16(len); - - iwl_dbg_log_tx_data_frame(priv, len, hdr); - iwl_update_stats(priv, true, fc, len); - tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; - tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; - - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n", - le16_to_cpu(out_cmd->hdr.sequence)); - IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); - iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, - ieee80211_hdrlen(fc)); - - /* - * Use the first empty entry in this queue's command buffer array - * to contain the Tx command and MAC header concatenated together - * (payload data will be in another buffer). - * Size of this varies, due to varying MAC header length. - * If end is not dword aligned, we'll have 2 extra bytes at the end - * of the MAC header (device reads on dword boundaries). - * We'll tell device about this padding later. - */ - len = sizeof(struct iwl3945_tx_cmd) + - sizeof(struct iwl_cmd_header) + hdr_len; - len = (len + 3) & ~3; - - /* Physical address of this Tx command's header (not MAC header!), - * within command buffer array. */ - txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr, - len, PCI_DMA_TODEVICE); - /* we do not map meta data ... so we can safely access address to - * provide to unmap command*/ - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, len); - - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, - txcmd_phys, len, 1, 0); - - - /* Set up TFD's 2nd entry to point directly to remainder of skb, - * if any (802.11 null frames have no payload). */ - len = skb->len - hdr_len; - if (len) { - phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len, - len, PCI_DMA_TODEVICE); - priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, - phys_addr, len, - 0, U32_PAD(len)); - } - - - /* Tell device the write index *just past* this latest filled TFD */ - q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); - iwl_txq_update_write_ptr(priv, txq); - spin_unlock_irqrestore(&priv->lock, flags); - - if ((iwl_queue_space(q) < q->high_mark) - && priv->mac80211_registered) { - if (wait_write_ptr) { - spin_lock_irqsave(&priv->lock, flags); - txq->need_update = 1; - iwl_txq_update_write_ptr(priv, txq); - spin_unlock_irqrestore(&priv->lock, flags); - } - - iwl_stop_queue(priv, txq); - } - - return 0; - -drop_unlock: - spin_unlock_irqrestore(&priv->lock, flags); -drop: - return -1; -} - -static int iwl3945_get_measurement(struct iwl_priv *priv, - struct ieee80211_measurement_params *params, - u8 type) -{ - struct iwl_spectrum_cmd spectrum; - struct iwl_rx_packet *pkt; - struct iwl_host_cmd cmd = { - .id = REPLY_SPECTRUM_MEASUREMENT_CMD, - .data = (void *)&spectrum, - .flags = CMD_WANT_SKB, - }; - u32 add_time = le64_to_cpu(params->start_time); - int rc; - int spectrum_resp_status; - int duration = le16_to_cpu(params->duration); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) - add_time = iwl_usecs_to_beacons(priv, - le64_to_cpu(params->start_time) - priv->_3945.last_tsf, - le16_to_cpu(ctx->timing.beacon_interval)); - - memset(&spectrum, 0, sizeof(spectrum)); - - spectrum.channel_count = cpu_to_le16(1); - spectrum.flags = - RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK; - spectrum.filter_flags = MEASUREMENT_FILTER_FLAG; - cmd.len = sizeof(spectrum); - spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len)); - - if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) - spectrum.start_time = - iwl_add_beacon_time(priv, - priv->_3945.last_beacon_time, add_time, - le16_to_cpu(ctx->timing.beacon_interval)); - else - spectrum.start_time = 0; - - spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT); - spectrum.channels[0].channel = params->channel; - spectrum.channels[0].type = type; - if (ctx->active.flags & RXON_FLG_BAND_24G_MSK) - spectrum.flags |= RXON_FLG_BAND_24G_MSK | - RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK; - - rc = iwl_send_cmd_sync(priv, &cmd); - if (rc) - return rc; - - pkt = (struct iwl_rx_packet *)cmd.reply_page; - if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { - IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n"); - rc = -EIO; - } - - spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status); - switch (spectrum_resp_status) { - case 0: /* Command will be handled */ - if (pkt->u.spectrum.id != 0xff) { - IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n", - pkt->u.spectrum.id); - priv->measurement_status &= ~MEASUREMENT_READY; - } - priv->measurement_status |= MEASUREMENT_ACTIVE; - rc = 0; - break; - - case 1: /* Command will not be handled */ - rc = -EAGAIN; - break; - } - - iwl_free_pages(priv, cmd.reply_page); - - return rc; -} - -static void iwl3945_rx_reply_alive(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_alive_resp *palive; - struct delayed_work *pwork; - - palive = &pkt->u.alive_frame; - - IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision " - "0x%01X 0x%01X\n", - palive->is_valid, palive->ver_type, - palive->ver_subtype); - - if (palive->ver_subtype == INITIALIZE_SUBTYPE) { - IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); - memcpy(&priv->card_alive_init, &pkt->u.alive_frame, - sizeof(struct iwl_alive_resp)); - pwork = &priv->init_alive_start; - } else { - IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); - memcpy(&priv->card_alive, &pkt->u.alive_frame, - sizeof(struct iwl_alive_resp)); - pwork = &priv->alive_start; - iwl3945_disable_events(priv); - } - - /* We delay the ALIVE response by 5ms to - * give the HW RF Kill time to activate... */ - if (palive->is_valid == UCODE_VALID_OK) - queue_delayed_work(priv->workqueue, pwork, - msecs_to_jiffies(5)); - else - IWL_WARN(priv, "uCode did not respond OK.\n"); -} - -static void iwl3945_rx_reply_add_sta(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); -#endif - - IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status); -} - -static void iwl3945_bg_beacon_update(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, beacon_update); - struct sk_buff *beacon; - - /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ - beacon = ieee80211_beacon_get(priv->hw, - priv->contexts[IWL_RXON_CTX_BSS].vif); - - if (!beacon) { - IWL_ERR(priv, "update beacon failed\n"); - return; - } - - mutex_lock(&priv->mutex); - /* new beacon skb is allocated every time; dispose previous.*/ - if (priv->beacon_skb) - dev_kfree_skb(priv->beacon_skb); - - priv->beacon_skb = beacon; - mutex_unlock(&priv->mutex); - - iwl3945_send_beacon_cmd(priv); -} - -static void iwl3945_rx_beacon_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status); -#ifdef CONFIG_IWLWIFI_DEBUG - u8 rate = beacon->beacon_notify_hdr.rate; - - IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d " - "tsf %d %d rate %d\n", - le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK, - beacon->beacon_notify_hdr.failure_frame, - le32_to_cpu(beacon->ibss_mgr_status), - le32_to_cpu(beacon->high_tsf), - le32_to_cpu(beacon->low_tsf), rate); -#endif - - priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); - - if ((priv->iw_mode == NL80211_IFTYPE_AP) && - (!test_bit(STATUS_EXIT_PENDING, &priv->status))) - queue_work(priv->workqueue, &priv->beacon_update); -} - -/* Handle notification from uCode that card's power state is changing - * due to software, hardware, or critical temperature RFKILL */ -static void iwl3945_rx_card_state_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); - unsigned long status = priv->status; - - IWL_WARN(priv, "Card state received: HW:%s SW:%s\n", - (flags & HW_CARD_DISABLED) ? "Kill" : "On", - (flags & SW_CARD_DISABLED) ? "Kill" : "On"); - - iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - if (flags & HW_CARD_DISABLED) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - - - iwl_scan_cancel(priv); - - if ((test_bit(STATUS_RF_KILL_HW, &status) != - test_bit(STATUS_RF_KILL_HW, &priv->status))) - wiphy_rfkill_set_hw_state(priv->hw->wiphy, - test_bit(STATUS_RF_KILL_HW, &priv->status)); - else - wake_up_interruptible(&priv->wait_command_queue); -} - -/** - * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks - * - * Setup the RX handlers for each of the reply types sent from the uCode - * to the host. - * - * This function chains into the hardware specific files for them to setup - * any hardware specific handlers as well. - */ -static void iwl3945_setup_rx_handlers(struct iwl_priv *priv) -{ - priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive; - priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta; - priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error; - priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa; - priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = - iwl_rx_spectrum_measure_notif; - priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif; - priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = - iwl_rx_pm_debug_statistics_notif; - priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif; - - /* - * The same handler is used for both the REPLY to a discrete - * statistics request from the host as well as for the periodic - * statistics notifications (after received beacons) from the uCode. - */ - priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_reply_statistics; - priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics; - - iwl_setup_rx_scan_handlers(priv); - priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif; - - /* Set up hardware specific Rx handlers */ - iwl3945_hw_rx_handler_setup(priv); -} - -/************************** RX-FUNCTIONS ****************************/ -/* - * Rx theory of operation - * - * The host allocates 32 DMA target addresses and passes the host address - * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is - * 0 to 31 - * - * Rx Queue Indexes - * The host/firmware share two index registers for managing the Rx buffers. - * - * The READ index maps to the first position that the firmware may be writing - * to -- the driver can read up to (but not including) this position and get - * good data. - * The READ index is managed by the firmware once the card is enabled. - * - * The WRITE index maps to the last position the driver has read from -- the - * position preceding WRITE is the last slot the firmware can place a packet. - * - * The queue is empty (no good data) if WRITE = READ - 1, and is full if - * WRITE = READ. - * - * During initialization, the host sets up the READ queue position to the first - * INDEX position, and WRITE to the last (READ - 1 wrapped) - * - * When the firmware places a packet in a buffer, it will advance the READ index - * and fire the RX interrupt. The driver can then query the READ index and - * process as many packets as possible, moving the WRITE index forward as it - * resets the Rx queue buffers with new memory. - * - * The management in the driver is as follows: - * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When - * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled - * to replenish the iwl->rxq->rx_free. - * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the - * iwl->rxq is replenished and the READ INDEX is updated (updating the - * 'processed' and 'read' driver indexes as well) - * + A received packet is processed and handed to the kernel network stack, - * detached from the iwl->rxq. The driver 'processed' index is updated. - * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free - * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ - * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there - * were enough free buffers and RX_STALLED is set it is cleared. - * - * - * Driver sequence: - * - * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls - * iwl3945_rx_queue_restock - * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx - * queue, updates firmware pointers, and updates - * the WRITE index. If insufficient rx_free buffers - * are available, schedules iwl3945_rx_replenish - * - * -- enable interrupts -- - * ISR - iwl3945_rx() Detach iwl_rx_mem_buffers from pool up to the - * READ INDEX, detaching the SKB from the pool. - * Moves the packet buffer from queue to rx_used. - * Calls iwl3945_rx_queue_restock to refill any empty - * slots. - * ... - * - */ - -/** - * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr - */ -static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl_priv *priv, - dma_addr_t dma_addr) -{ - return cpu_to_le32((u32)dma_addr); -} - -/** - * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool - * - * If there are slots in the RX queue that need to be restocked, - * and we have free pre-allocated buffers, fill the ranks as much - * as we can, pulling from rx_free. - * - * This moves the 'write' index forward to catch up with 'processed', and - * also updates the memory address in the firmware to reference the new - * target buffer. - */ -static void iwl3945_rx_queue_restock(struct iwl_priv *priv) -{ - struct iwl_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - unsigned long flags; - int write; - - spin_lock_irqsave(&rxq->lock, flags); - write = rxq->write & ~0x7; - while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { - /* Get next free Rx buffer, remove from free list */ - element = rxq->rx_free.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->page_dma); - rxq->queue[rxq->write] = rxb; - rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; - rxq->free_count--; - } - spin_unlock_irqrestore(&rxq->lock, flags); - /* If the pre-allocated buffer pool is dropping low, schedule to - * refill it */ - if (rxq->free_count <= RX_LOW_WATERMARK) - queue_work(priv->workqueue, &priv->rx_replenish); - - - /* If we've added more space for the firmware to place data, tell it. - * Increment device's write pointer in multiples of 8. */ - if ((rxq->write_actual != (rxq->write & ~0x7)) - || (abs(rxq->write - rxq->read) > 7)) { - spin_lock_irqsave(&rxq->lock, flags); - rxq->need_update = 1; - spin_unlock_irqrestore(&rxq->lock, flags); - iwl_rx_queue_update_write_ptr(priv, rxq); - } -} - -/** - * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free - * - * When moving to rx_free an SKB is allocated for the slot. - * - * Also restock the Rx queue via iwl3945_rx_queue_restock. - * This is called as a scheduled work item (except for during initialization) - */ -static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority) -{ - struct iwl_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - struct page *page; - unsigned long flags; - gfp_t gfp_mask = priority; - - while (1) { - spin_lock_irqsave(&rxq->lock, flags); - - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - return; - } - spin_unlock_irqrestore(&rxq->lock, flags); - - if (rxq->free_count > RX_LOW_WATERMARK) - gfp_mask |= __GFP_NOWARN; - - if (priv->hw_params.rx_page_order > 0) - gfp_mask |= __GFP_COMP; - - /* Alloc a new receive buffer */ - page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order); - if (!page) { - if (net_ratelimit()) - IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n"); - if ((rxq->free_count <= RX_LOW_WATERMARK) && - net_ratelimit()) - IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n", - priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", - rxq->free_count); - /* We don't reschedule replenish work here -- we will - * call the restock method and if it still needs - * more buffers it will schedule replenish */ - break; - } - - spin_lock_irqsave(&rxq->lock, flags); - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - __free_pages(page, priv->hw_params.rx_page_order); - return; - } - element = rxq->rx_used.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - spin_unlock_irqrestore(&rxq->lock, flags); - - rxb->page = page; - /* Get physical address of RB/SKB */ - rxb->page_dma = pci_map_page(priv->pci_dev, page, 0, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - - spin_lock_irqsave(&rxq->lock, flags); - - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - priv->alloc_rxb_page++; - - spin_unlock_irqrestore(&rxq->lock, flags); - } -} - -void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - unsigned long flags; - int i; - spin_lock_irqsave(&rxq->lock, flags); - INIT_LIST_HEAD(&rxq->rx_free); - INIT_LIST_HEAD(&rxq->rx_used); - /* Fill the rx_used queue with _all_ of the Rx buffers */ - for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { - /* In the reset function, these buffers may have been allocated - * to an SKB, so we need to unmap and free potential storage */ - if (rxq->pool[i].page != NULL) { - pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __iwl_free_pages(priv, rxq->pool[i].page); - rxq->pool[i].page = NULL; - } - list_add_tail(&rxq->pool[i].list, &rxq->rx_used); - } - - /* Set us so that we have processed and used all buffers, but have - * not restocked the Rx queue with fresh buffers */ - rxq->read = rxq->write = 0; - rxq->write_actual = 0; - rxq->free_count = 0; - spin_unlock_irqrestore(&rxq->lock, flags); -} - -void iwl3945_rx_replenish(void *data) -{ - struct iwl_priv *priv = data; - unsigned long flags; - - iwl3945_rx_allocate(priv, GFP_KERNEL); - - spin_lock_irqsave(&priv->lock, flags); - iwl3945_rx_queue_restock(priv); - spin_unlock_irqrestore(&priv->lock, flags); -} - -static void iwl3945_rx_replenish_now(struct iwl_priv *priv) -{ - iwl3945_rx_allocate(priv, GFP_ATOMIC); - - iwl3945_rx_queue_restock(priv); -} - - -/* Assumes that the skb field of the buffers in 'pool' is kept accurate. - * If an SKB has been detached, the POOL needs to have its SKB set to NULL - * This free routine walks the list of POOL entries and if SKB is set to - * non NULL it is unmapped and freed - */ -static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - int i; - for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { - if (rxq->pool[i].page != NULL) { - pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __iwl_free_pages(priv, rxq->pool[i].page); - rxq->pool[i].page = NULL; - } - } - - dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, - rxq->bd_dma); - dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status), - rxq->rb_stts, rxq->rb_stts_dma); - rxq->bd = NULL; - rxq->rb_stts = NULL; -} - - -/* Convert linear signal-to-noise ratio into dB */ -static u8 ratio2dB[100] = { -/* 0 1 2 3 4 5 6 7 8 9 */ - 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */ - 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */ - 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */ - 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */ - 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */ - 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */ - 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */ - 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */ - 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */ - 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */ -}; - -/* Calculates a relative dB value from a ratio of linear - * (i.e. not dB) signal levels. - * Conversion assumes that levels are voltages (20*log), not powers (10*log). */ -int iwl3945_calc_db_from_ratio(int sig_ratio) -{ - /* 1000:1 or higher just report as 60 dB */ - if (sig_ratio >= 1000) - return 60; - - /* 100:1 or higher, divide by 10 and use table, - * add 20 dB to make up for divide by 10 */ - if (sig_ratio >= 100) - return 20 + (int)ratio2dB[sig_ratio/10]; - - /* We shouldn't see this */ - if (sig_ratio < 1) - return 0; - - /* Use table for ratios 1:1 - 99:1 */ - return (int)ratio2dB[sig_ratio]; -} - -/** - * iwl3945_rx_handle - Main entry function for receiving responses from uCode - * - * Uses the priv->rx_handlers callback function array to invoke - * the appropriate handlers, including command responses, - * frame-received notifications, and other notifications. - */ -static void iwl3945_rx_handle(struct iwl_priv *priv) -{ - struct iwl_rx_mem_buffer *rxb; - struct iwl_rx_packet *pkt; - struct iwl_rx_queue *rxq = &priv->rxq; - u32 r, i; - int reclaim; - unsigned long flags; - u8 fill_rx = 0; - u32 count = 8; - int total_empty = 0; - - /* uCode's read index (stored in shared DRAM) indicates the last Rx - * buffer that the driver may process (last buffer filled by ucode). */ - r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; - i = rxq->read; - - /* calculate total frames need to be restock after handling RX */ - total_empty = r - rxq->write_actual; - if (total_empty < 0) - total_empty += RX_QUEUE_SIZE; - - if (total_empty > (RX_QUEUE_SIZE / 2)) - fill_rx = 1; - /* Rx interrupt, but nothing sent from uCode */ - if (i == r) - IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i); - - while (i != r) { - int len; - - rxb = rxq->queue[i]; - - /* If an RXB doesn't have a Rx queue slot associated with it, - * then a bug has been introduced in the queue refilling - * routines -- catch it here */ - BUG_ON(rxb == NULL); - - rxq->queue[i] = NULL; - - pci_unmap_page(priv->pci_dev, rxb->page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - pkt = rxb_addr(rxb); - - len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - len += sizeof(u32); /* account for status word */ - trace_iwlwifi_dev_rx(priv, pkt, len); - - /* Reclaim a command buffer only if this packet is a response - * to a (driver-originated) command. - * If the packet (e.g. Rx frame) originated from uCode, - * there is no command buffer to reclaim. - * Ucode should set SEQ_RX_FRAME bit if ucode-originated, - * but apparently a few don't get set; catch them here. */ - reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && - (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && - (pkt->hdr.cmd != REPLY_TX); - - /* Based on type of command response or notification, - * handle those that need handling via function in - * rx_handlers table. See iwl3945_setup_rx_handlers() */ - if (priv->rx_handlers[pkt->hdr.cmd]) { - IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i, - get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); - priv->isr_stats.rx_handlers[pkt->hdr.cmd]++; - priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); - } else { - /* No handling needed */ - IWL_DEBUG_RX(priv, - "r %d i %d No handler needed for %s, 0x%02x\n", - r, i, get_cmd_string(pkt->hdr.cmd), - pkt->hdr.cmd); - } - - /* - * XXX: After here, we should always check rxb->page - * against NULL before touching it or its virtual - * memory (pkt). Because some rx_handler might have - * already taken or freed the pages. - */ - - if (reclaim) { - /* Invoke any callbacks, transfer the buffer to caller, - * and fire off the (possibly) blocking iwl_send_cmd() - * as we reclaim the driver command queue */ - if (rxb->page) - iwl_tx_cmd_complete(priv, rxb); - else - IWL_WARN(priv, "Claim null rxb?\n"); - } - - /* Reuse the page if possible. For notification packets and - * SKBs that fail to Rx correctly, add them back into the - * rx_free list for reuse later. */ - spin_lock_irqsave(&rxq->lock, flags); - if (rxb->page != NULL) { - rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page, - 0, PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - } else - list_add_tail(&rxb->list, &rxq->rx_used); - - spin_unlock_irqrestore(&rxq->lock, flags); - - i = (i + 1) & RX_QUEUE_MASK; - /* If there are a lot of unused frames, - * restock the Rx queue so ucode won't assert. */ - if (fill_rx) { - count++; - if (count >= 8) { - rxq->read = i; - iwl3945_rx_replenish_now(priv); - count = 0; - } - } - } - - /* Backtrack one entry */ - rxq->read = i; - if (fill_rx) - iwl3945_rx_replenish_now(priv); - else - iwl3945_rx_queue_restock(priv); -} - -/* call this function to flush any scheduled tasklet */ -static inline void iwl_synchronize_irq(struct iwl_priv *priv) -{ - /* wait to make sure we flush pending tasklet*/ - synchronize_irq(priv->pci_dev->irq); - tasklet_kill(&priv->irq_tasklet); -} - -static const char *desc_lookup(int i) -{ - switch (i) { - case 1: - return "FAIL"; - case 2: - return "BAD_PARAM"; - case 3: - return "BAD_CHECKSUM"; - case 4: - return "NMI_INTERRUPT"; - case 5: - return "SYSASSERT"; - case 6: - return "FATAL_ERROR"; - } - - return "UNKNOWN"; -} - -#define ERROR_START_OFFSET (1 * sizeof(u32)) -#define ERROR_ELEM_SIZE (7 * sizeof(u32)) - -void iwl3945_dump_nic_error_log(struct iwl_priv *priv) -{ - u32 i; - u32 desc, time, count, base, data1; - u32 blink1, blink2, ilink1, ilink2; - - base = le32_to_cpu(priv->card_alive.error_event_table_ptr); - - if (!iwl3945_hw_valid_rtc_data_addr(base)) { - IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base); - return; - } - - - count = iwl_read_targ_mem(priv, base); - - if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { - IWL_ERR(priv, "Start IWL Error Log Dump:\n"); - IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", - priv->status, count); - } - - IWL_ERR(priv, "Desc Time asrtPC blink2 " - "ilink1 nmiPC Line\n"); - for (i = ERROR_START_OFFSET; - i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET; - i += ERROR_ELEM_SIZE) { - desc = iwl_read_targ_mem(priv, base + i); - time = - iwl_read_targ_mem(priv, base + i + 1 * sizeof(u32)); - blink1 = - iwl_read_targ_mem(priv, base + i + 2 * sizeof(u32)); - blink2 = - iwl_read_targ_mem(priv, base + i + 3 * sizeof(u32)); - ilink1 = - iwl_read_targ_mem(priv, base + i + 4 * sizeof(u32)); - ilink2 = - iwl_read_targ_mem(priv, base + i + 5 * sizeof(u32)); - data1 = - iwl_read_targ_mem(priv, base + i + 6 * sizeof(u32)); - - IWL_ERR(priv, - "%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n", - desc_lookup(desc), desc, time, blink1, blink2, - ilink1, ilink2, data1); - trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, 0, - 0, blink1, blink2, ilink1, ilink2); - } -} - -#define EVENT_START_OFFSET (6 * sizeof(u32)) - -/** - * iwl3945_print_event_log - Dump error event log to syslog - * - */ -static int iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx, - u32 num_events, u32 mode, - int pos, char **buf, size_t bufsz) -{ - u32 i; - u32 base; /* SRAM byte address of event log header */ - u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - unsigned long reg_flags; - - if (num_events == 0) - return pos; - - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - - if (mode == 0) - event_size = 2 * sizeof(u32); - else - event_size = 3 * sizeof(u32); - - ptr = base + EVENT_START_OFFSET + (start_idx * event_size); - - /* Make sure device is powered up for SRAM reads */ - spin_lock_irqsave(&priv->reg_lock, reg_flags); - iwl_grab_nic_access(priv); - - /* Set starting address; reads will auto-increment */ - _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr); - rmb(); - - /* "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. */ - for (i = 0; i < num_events; i++) { - ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (mode == 0) { - /* data, ev */ - if (bufsz) { - pos += scnprintf(*buf + pos, bufsz - pos, - "0x%08x:%04u\n", - time, ev); - } else { - IWL_ERR(priv, "0x%08x\t%04u\n", time, ev); - trace_iwlwifi_dev_ucode_event(priv, 0, - time, ev); - } - } else { - data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (bufsz) { - pos += scnprintf(*buf + pos, bufsz - pos, - "%010u:0x%08x:%04u\n", - time, data, ev); - } else { - IWL_ERR(priv, "%010u\t0x%08x\t%04u\n", - time, data, ev); - trace_iwlwifi_dev_ucode_event(priv, time, - data, ev); - } - } - } - - /* Allow device to power down */ - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->reg_lock, reg_flags); - return pos; -} - -/** - * iwl3945_print_last_event_logs - Dump the newest # of event log to syslog - */ -static int iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity, - u32 num_wraps, u32 next_entry, - u32 size, u32 mode, - int pos, char **buf, size_t bufsz) -{ - /* - * display the newest DEFAULT_LOG_ENTRIES entries - * i.e the entries just before the next ont that uCode would fill. - */ - if (num_wraps) { - if (next_entry < size) { - pos = iwl3945_print_event_log(priv, - capacity - (size - next_entry), - size - next_entry, mode, - pos, buf, bufsz); - pos = iwl3945_print_event_log(priv, 0, - next_entry, mode, - pos, buf, bufsz); - } else - pos = iwl3945_print_event_log(priv, next_entry - size, - size, mode, - pos, buf, bufsz); - } else { - if (next_entry < size) - pos = iwl3945_print_event_log(priv, 0, - next_entry, mode, - pos, buf, bufsz); - else - pos = iwl3945_print_event_log(priv, next_entry - size, - size, mode, - pos, buf, bufsz); - } - return pos; -} - -#define DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES (20) - -int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log, - char **buf, bool display) -{ - u32 base; /* SRAM byte address of event log header */ - u32 capacity; /* event log capacity in # entries */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - u32 size; /* # entries that we'll print */ - int pos = 0; - size_t bufsz = 0; - - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - if (!iwl3945_hw_valid_rtc_data_addr(base)) { - IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base); - return -EINVAL; - } - - /* event log header */ - capacity = iwl_read_targ_mem(priv, base); - mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); - num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); - next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); - - if (capacity > priv->cfg->base_params->max_event_log_size) { - IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n", - capacity, priv->cfg->base_params->max_event_log_size); - capacity = priv->cfg->base_params->max_event_log_size; - } - - if (next_entry > priv->cfg->base_params->max_event_log_size) { - IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n", - next_entry, priv->cfg->base_params->max_event_log_size); - next_entry = priv->cfg->base_params->max_event_log_size; - } - - size = num_wraps ? capacity : next_entry; - - /* bail out if nothing in log */ - if (size == 0) { - IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n"); - return pos; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) - size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES) - ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size; -#else - size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES) - ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size; -#endif - - IWL_ERR(priv, "Start IWL Event Log Dump: display last %d count\n", - size); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (display) { - if (full_log) - bufsz = capacity * 48; - else - bufsz = size * 48; - *buf = kmalloc(bufsz, GFP_KERNEL); - if (!*buf) - return -ENOMEM; - } - if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) { - /* if uCode has wrapped back to top of log, - * start at the oldest entry, - * i.e the next one that uCode would fill. - */ - if (num_wraps) - pos = iwl3945_print_event_log(priv, next_entry, - capacity - next_entry, mode, - pos, buf, bufsz); - - /* (then/else) start at top of log */ - pos = iwl3945_print_event_log(priv, 0, next_entry, mode, - pos, buf, bufsz); - } else - pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps, - next_entry, size, mode, - pos, buf, bufsz); -#else - pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps, - next_entry, size, mode, - pos, buf, bufsz); -#endif - return pos; -} - -static void iwl3945_irq_tasklet(struct iwl_priv *priv) -{ - u32 inta, handled = 0; - u32 inta_fh; - unsigned long flags; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_mask; -#endif - - spin_lock_irqsave(&priv->lock, flags); - - /* Ack/clear/reset pending uCode interrupts. - * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, - * and will clear only when CSR_FH_INT_STATUS gets cleared. */ - inta = iwl_read32(priv, CSR_INT); - iwl_write32(priv, CSR_INT, inta); - - /* Ack/clear/reset pending flow-handler (DMA) interrupts. - * Any new interrupts that happen after this, either while we're - * in this tasklet, or later, will show up in next ISR/tasklet. */ - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & IWL_DL_ISR) { - /* just for debug */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); - IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", - inta, inta_mask, inta_fh); - } -#endif - - spin_unlock_irqrestore(&priv->lock, flags); - - /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not - * atomic, make sure that inta covers all the interrupts that - * we've discovered, even if FH interrupt came in just after - * reading CSR_INT. */ - if (inta_fh & CSR39_FH_INT_RX_MASK) - inta |= CSR_INT_BIT_FH_RX; - if (inta_fh & CSR39_FH_INT_TX_MASK) - inta |= CSR_INT_BIT_FH_TX; - - /* Now service all interrupt bits discovered above. */ - if (inta & CSR_INT_BIT_HW_ERR) { - IWL_ERR(priv, "Hardware error detected. Restarting.\n"); - - /* Tell the device to stop sending interrupts */ - iwl_disable_interrupts(priv); - - priv->isr_stats.hw++; - iwl_irq_handle_error(priv); - - handled |= CSR_INT_BIT_HW_ERR; - - return; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { - /* NIC fires this, but we don't use it, redundant with WAKEUP */ - if (inta & CSR_INT_BIT_SCD) { - IWL_DEBUG_ISR(priv, "Scheduler finished to transmit " - "the frame/frames.\n"); - priv->isr_stats.sch++; - } - - /* Alive notification via Rx interrupt will do the real work */ - if (inta & CSR_INT_BIT_ALIVE) { - IWL_DEBUG_ISR(priv, "Alive interrupt\n"); - priv->isr_stats.alive++; - } - } -#endif - /* Safely ignore these bits for debug checks below */ - inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); - - /* Error detected by uCode */ - if (inta & CSR_INT_BIT_SW_ERR) { - IWL_ERR(priv, "Microcode SW error detected. " - "Restarting 0x%X.\n", inta); - priv->isr_stats.sw++; - iwl_irq_handle_error(priv); - handled |= CSR_INT_BIT_SW_ERR; - } - - /* uCode wakes up after power-down sleep */ - if (inta & CSR_INT_BIT_WAKEUP) { - IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); - iwl_rx_queue_update_write_ptr(priv, &priv->rxq); - iwl_txq_update_write_ptr(priv, &priv->txq[0]); - iwl_txq_update_write_ptr(priv, &priv->txq[1]); - iwl_txq_update_write_ptr(priv, &priv->txq[2]); - iwl_txq_update_write_ptr(priv, &priv->txq[3]); - iwl_txq_update_write_ptr(priv, &priv->txq[4]); - iwl_txq_update_write_ptr(priv, &priv->txq[5]); - - priv->isr_stats.wakeup++; - handled |= CSR_INT_BIT_WAKEUP; - } - - /* All uCode command responses, including Tx command responses, - * Rx "responses" (frame-received notification), and other - * notifications from uCode come through here*/ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { - iwl3945_rx_handle(priv); - priv->isr_stats.rx++; - handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); - } - - if (inta & CSR_INT_BIT_FH_TX) { - IWL_DEBUG_ISR(priv, "Tx interrupt\n"); - priv->isr_stats.tx++; - - iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6)); - iwl_write_direct32(priv, FH39_TCSR_CREDIT - (FH39_SRVC_CHNL), 0x0); - handled |= CSR_INT_BIT_FH_TX; - } - - if (inta & ~handled) { - IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled); - priv->isr_stats.unhandled++; - } - - if (inta & ~priv->inta_mask) { - IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n", - inta & ~priv->inta_mask); - IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh); - } - - /* Re-enable all interrupts */ - /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl_enable_interrupts(priv); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { - inta = iwl_read32(priv, CSR_INT); - inta_mask = iwl_read32(priv, CSR_INT_MASK); - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " - "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); - } -#endif -} - -static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum ieee80211_band band, - struct iwl3945_scan_channel *scan_ch) -{ - const struct ieee80211_supported_band *sband; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added = 0; - u8 channel = 0; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) { - IWL_ERR(priv, "invalid band\n"); - return added; - } - - active_dwell = iwl_get_active_dwell_time(priv, band, 0); - passive_dwell = iwl_get_passive_dwell_time(priv, band, vif); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - - channel = iwl_get_single_channel_number(priv, band); - - if (channel) { - scan_ch->channel = channel; - scan_ch->type = 0; /* passive */ - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - /* Set txpower levels to defaults */ - scan_ch->tpc.dsp_atten = 110; - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); - added++; - } else - IWL_ERR(priv, "no valid channel found\n"); - return added; -} - -static int iwl3945_get_channels_for_scan(struct iwl_priv *priv, - enum ieee80211_band band, - u8 is_active, u8 n_probes, - struct iwl3945_scan_channel *scan_ch, - struct ieee80211_vif *vif) -{ - struct ieee80211_channel *chan; - const struct ieee80211_supported_band *sband; - const struct iwl_channel_info *ch_info; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added, i; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) - return 0; - - active_dwell = iwl_get_active_dwell_time(priv, band, n_probes); - passive_dwell = iwl_get_passive_dwell_time(priv, band, vif); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) { - chan = priv->scan_request->channels[i]; - - if (chan->band != band) - continue; - - scan_ch->channel = chan->hw_value; - - ch_info = iwl_get_channel_info(priv, band, scan_ch->channel); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n", - scan_ch->channel); - continue; - } - - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - /* If passive , set up for auto-switch - * and use long active_dwell time. - */ - if (!is_active || is_channel_passive(ch_info) || - (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) { - scan_ch->type = 0; /* passive */ - if (IWL_UCODE_API(priv->ucode_ver) == 1) - scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1); - } else { - scan_ch->type = 1; /* active */ - } - - /* Set direct probe bits. These may be used both for active - * scan channels (probes gets sent right away), - * or for passive channels (probes get se sent only after - * hearing clear Rx packet).*/ - if (IWL_UCODE_API(priv->ucode_ver) >= 2) { - if (n_probes) - scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes); - } else { - /* uCode v1 does not allow setting direct probe bits on - * passive channel. */ - if ((scan_ch->type & 1) && n_probes) - scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes); - } - - /* Set txpower levels to defaults */ - scan_ch->tpc.dsp_atten = 110; - /* scan_pwr_info->tpc.dsp_atten; */ - - /*scan_pwr_info->tpc.tx_gain; */ - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; - else { - scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - } - - IWL_DEBUG_SCAN(priv, "Scanning %d [%s %d]\n", - scan_ch->channel, - (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE", - (scan_ch->type & 1) ? - active_dwell : passive_dwell); - - scan_ch++; - added++; - } - - IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added); - return added; -} - -static void iwl3945_init_hw_rates(struct iwl_priv *priv, - struct ieee80211_rate *rates) -{ - int i; - - for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { - rates[i].bitrate = iwl3945_rates[i].ieee * 5; - rates[i].hw_value = i; /* Rate scaling will work on indexes */ - rates[i].hw_value_short = i; - rates[i].flags = 0; - if ((i > IWL39_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) { - /* - * If CCK != 1M then set short preamble rate flag. - */ - rates[i].flags |= (iwl3945_rates[i].plcp == 10) ? - 0 : IEEE80211_RATE_SHORT_PREAMBLE; - } - } -} - -/****************************************************************************** - * - * uCode download functions - * - ******************************************************************************/ - -static void iwl3945_dealloc_ucode_pci(struct iwl_priv *priv) -{ - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot); -} - -/** - * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host, - * looking at all data. - */ -static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 len) -{ - u32 val; - u32 save_len = len; - int rc = 0; - u32 errcnt; - - IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len); - - iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, - IWL39_RTC_INST_LOWER_BOUND); - - errcnt = 0; - for (; len > 0; len -= sizeof(u32), image++) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { - IWL_ERR(priv, "uCode INST section is invalid at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - save_len - len, val, le32_to_cpu(*image)); - rc = -EIO; - errcnt++; - if (errcnt >= 20) - break; - } - } - - - if (!errcnt) - IWL_DEBUG_INFO(priv, - "ucode image in INSTRUCTION memory is good\n"); - - return rc; -} - - -/** - * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host, - * using sample data 100 bytes apart. If these sample points are good, - * it's a pretty good bet that everything between them is good, too. - */ -static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) -{ - u32 val; - int rc = 0; - u32 errcnt = 0; - u32 i; - - IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len); - - for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, - i + IWL39_RTC_INST_LOWER_BOUND); - val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { -#if 0 /* Enable this if you want to see details */ - IWL_ERR(priv, "uCode INST section is invalid at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - i, val, *image); -#endif - rc = -EIO; - errcnt++; - if (errcnt >= 3) - break; - } - } - - return rc; -} - - -/** - * iwl3945_verify_ucode - determine which instruction image is in SRAM, - * and verify its contents - */ -static int iwl3945_verify_ucode(struct iwl_priv *priv) -{ - __le32 *image; - u32 len; - int rc = 0; - - /* Try bootstrap */ - image = (__le32 *)priv->ucode_boot.v_addr; - len = priv->ucode_boot.len; - rc = iwl3945_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n"); - return 0; - } - - /* Try initialize */ - image = (__le32 *)priv->ucode_init.v_addr; - len = priv->ucode_init.len; - rc = iwl3945_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n"); - return 0; - } - - /* Try runtime/protocol */ - image = (__le32 *)priv->ucode_code.v_addr; - len = priv->ucode_code.len; - rc = iwl3945_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n"); - return 0; - } - - IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); - - /* Since nothing seems to match, show first several data entries in - * instruction SRAM, so maybe visual inspection will give a clue. - * Selection of bootstrap image (vs. other images) is arbitrary. */ - image = (__le32 *)priv->ucode_boot.v_addr; - len = priv->ucode_boot.len; - rc = iwl3945_verify_inst_full(priv, image, len); - - return rc; -} - -static void iwl3945_nic_start(struct iwl_priv *priv) -{ - /* Remove all resets to allow NIC to operate */ - iwl_write32(priv, CSR_RESET, 0); -} - -#define IWL3945_UCODE_GET(item) \ -static u32 iwl3945_ucode_get_##item(const struct iwl_ucode_header *ucode)\ -{ \ - return le32_to_cpu(ucode->u.v1.item); \ -} - -static u32 iwl3945_ucode_get_header_size(u32 api_ver) -{ - return 24; -} - -static u8 *iwl3945_ucode_get_data(const struct iwl_ucode_header *ucode) -{ - return (u8 *) ucode->u.v1.data; -} - -IWL3945_UCODE_GET(inst_size); -IWL3945_UCODE_GET(data_size); -IWL3945_UCODE_GET(init_size); -IWL3945_UCODE_GET(init_data_size); -IWL3945_UCODE_GET(boot_size); - -/** - * iwl3945_read_ucode - Read uCode images from disk file. - * - * Copy into buffers for card to fetch via bus-mastering - */ -static int iwl3945_read_ucode(struct iwl_priv *priv) -{ - const struct iwl_ucode_header *ucode; - int ret = -EINVAL, index; - const struct firmware *ucode_raw; - /* firmware file name contains uCode/driver compatibility version */ - const char *name_pre = priv->cfg->fw_name_pre; - const unsigned int api_max = priv->cfg->ucode_api_max; - const unsigned int api_min = priv->cfg->ucode_api_min; - char buf[25]; - u8 *src; - size_t len; - u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size; - - /* Ask kernel firmware_class module to get the boot firmware off disk. - * request_firmware() is synchronous, file is in memory on return. */ - for (index = api_max; index >= api_min; index--) { - sprintf(buf, "%s%u%s", name_pre, index, ".ucode"); - ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev); - if (ret < 0) { - IWL_ERR(priv, "%s firmware file req failed: %d\n", - buf, ret); - if (ret == -ENOENT) - continue; - else - goto error; - } else { - if (index < api_max) - IWL_ERR(priv, "Loaded firmware %s, " - "which is deprecated. " - " Please use API v%u instead.\n", - buf, api_max); - IWL_DEBUG_INFO(priv, "Got firmware '%s' file " - "(%zd bytes) from disk\n", - buf, ucode_raw->size); - break; - } - } - - if (ret < 0) - goto error; - - /* Make sure that we got at least our header! */ - if (ucode_raw->size < iwl3945_ucode_get_header_size(1)) { - IWL_ERR(priv, "File size way too small!\n"); - ret = -EINVAL; - goto err_release; - } - - /* Data from ucode file: header followed by uCode images */ - ucode = (struct iwl_ucode_header *)ucode_raw->data; - - priv->ucode_ver = le32_to_cpu(ucode->ver); - api_ver = IWL_UCODE_API(priv->ucode_ver); - inst_size = iwl3945_ucode_get_inst_size(ucode); - data_size = iwl3945_ucode_get_data_size(ucode); - init_size = iwl3945_ucode_get_init_size(ucode); - init_data_size = iwl3945_ucode_get_init_data_size(ucode); - boot_size = iwl3945_ucode_get_boot_size(ucode); - src = iwl3945_ucode_get_data(ucode); - - /* api_ver should match the api version forming part of the - * firmware filename ... but we don't check for that and only rely - * on the API version read from firmware header from here on forward */ - - if (api_ver < api_min || api_ver > api_max) { - IWL_ERR(priv, "Driver unable to support your firmware API. " - "Driver supports v%u, firmware is v%u.\n", - api_max, api_ver); - priv->ucode_ver = 0; - ret = -EINVAL; - goto err_release; - } - if (api_ver != api_max) - IWL_ERR(priv, "Firmware has old API version. Expected %u, " - "got %u. New firmware can be obtained " - "from http://www.intellinuxwireless.org.\n", - api_max, api_ver); - - IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n", - IWL_UCODE_MAJOR(priv->ucode_ver), - IWL_UCODE_MINOR(priv->ucode_ver), - IWL_UCODE_API(priv->ucode_ver), - IWL_UCODE_SERIAL(priv->ucode_ver)); - - snprintf(priv->hw->wiphy->fw_version, - sizeof(priv->hw->wiphy->fw_version), - "%u.%u.%u.%u", - IWL_UCODE_MAJOR(priv->ucode_ver), - IWL_UCODE_MINOR(priv->ucode_ver), - IWL_UCODE_API(priv->ucode_ver), - IWL_UCODE_SERIAL(priv->ucode_ver)); - - IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n", - priv->ucode_ver); - IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n", - inst_size); - IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n", - data_size); - IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n", - init_size); - IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n", - init_data_size); - IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n", - boot_size); - - - /* Verify size of file vs. image size info in file's header */ - if (ucode_raw->size != iwl3945_ucode_get_header_size(api_ver) + - inst_size + data_size + init_size + - init_data_size + boot_size) { - - IWL_DEBUG_INFO(priv, - "uCode file size %zd does not match expected size\n", - ucode_raw->size); - ret = -EINVAL; - goto err_release; - } - - /* Verify that uCode images will fit in card's SRAM */ - if (inst_size > IWL39_MAX_INST_SIZE) { - IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n", - inst_size); - ret = -EINVAL; - goto err_release; - } - - if (data_size > IWL39_MAX_DATA_SIZE) { - IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n", - data_size); - ret = -EINVAL; - goto err_release; - } - if (init_size > IWL39_MAX_INST_SIZE) { - IWL_DEBUG_INFO(priv, - "uCode init instr len %d too large to fit in\n", - init_size); - ret = -EINVAL; - goto err_release; - } - if (init_data_size > IWL39_MAX_DATA_SIZE) { - IWL_DEBUG_INFO(priv, - "uCode init data len %d too large to fit in\n", - init_data_size); - ret = -EINVAL; - goto err_release; - } - if (boot_size > IWL39_MAX_BSM_SIZE) { - IWL_DEBUG_INFO(priv, - "uCode boot instr len %d too large to fit in\n", - boot_size); - ret = -EINVAL; - goto err_release; - } - - /* Allocate ucode buffers for card's bus-master loading ... */ - - /* Runtime instructions and 2 copies of data: - * 1) unmodified from disk - * 2) backup cache for save/restore during power-downs */ - priv->ucode_code.len = inst_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code); - - priv->ucode_data.len = data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data); - - priv->ucode_data_backup.len = data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); - - if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || - !priv->ucode_data_backup.v_addr) - goto err_pci_alloc; - - /* Initialization instructions and data */ - if (init_size && init_data_size) { - priv->ucode_init.len = init_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init); - - priv->ucode_init_data.len = init_data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data); - - if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr) - goto err_pci_alloc; - } - - /* Bootstrap (instructions only, no data) */ - if (boot_size) { - priv->ucode_boot.len = boot_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot); - - if (!priv->ucode_boot.v_addr) - goto err_pci_alloc; - } - - /* Copy images into buffers for card's bus-master reads ... */ - - /* Runtime instructions (first block of data in file) */ - len = inst_size; - IWL_DEBUG_INFO(priv, - "Copying (but not loading) uCode instr len %zd\n", len); - memcpy(priv->ucode_code.v_addr, src, len); - src += len; - - IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", - priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); - - /* Runtime data (2nd block) - * NOTE: Copy into backup buffer will be done in iwl3945_up() */ - len = data_size; - IWL_DEBUG_INFO(priv, - "Copying (but not loading) uCode data len %zd\n", len); - memcpy(priv->ucode_data.v_addr, src, len); - memcpy(priv->ucode_data_backup.v_addr, src, len); - src += len; - - /* Initialization instructions (3rd block) */ - if (init_size) { - len = init_size; - IWL_DEBUG_INFO(priv, - "Copying (but not loading) init instr len %zd\n", len); - memcpy(priv->ucode_init.v_addr, src, len); - src += len; - } - - /* Initialization data (4th block) */ - if (init_data_size) { - len = init_data_size; - IWL_DEBUG_INFO(priv, - "Copying (but not loading) init data len %zd\n", len); - memcpy(priv->ucode_init_data.v_addr, src, len); - src += len; - } - - /* Bootstrap instructions (5th block) */ - len = boot_size; - IWL_DEBUG_INFO(priv, - "Copying (but not loading) boot instr len %zd\n", len); - memcpy(priv->ucode_boot.v_addr, src, len); - - /* We have our copies now, allow OS release its copies */ - release_firmware(ucode_raw); - return 0; - - err_pci_alloc: - IWL_ERR(priv, "failed to allocate pci memory\n"); - ret = -ENOMEM; - iwl3945_dealloc_ucode_pci(priv); - - err_release: - release_firmware(ucode_raw); - - error: - return ret; -} - - -/** - * iwl3945_set_ucode_ptrs - Set uCode address location - * - * Tell initialization uCode where to find runtime uCode. - * - * BSM registers initially contain pointers to initialization uCode. - * We need to replace them to load runtime uCode inst and data, - * and to save runtime data when powering down. - */ -static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv) -{ - dma_addr_t pinst; - dma_addr_t pdata; - - /* bits 31:0 for 3945 */ - pinst = priv->ucode_code.p_addr; - pdata = priv->ucode_data_backup.p_addr; - - /* Tell bootstrap uCode where to find image to load */ - iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); - iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); - iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, - priv->ucode_data.len); - - /* Inst byte count must be last to set up, bit 31 signals uCode - * that all new ptr/size info is in place */ - iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, - priv->ucode_code.len | BSM_DRAM_INST_LOAD); - - IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n"); - - return 0; -} - -/** - * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received - * - * Called after REPLY_ALIVE notification received from "initialize" uCode. - * - * Tell "initialize" uCode to go ahead and load the runtime uCode. - */ -static void iwl3945_init_alive_start(struct iwl_priv *priv) -{ - /* Check alive response for "valid" sign from uCode */ - if (priv->card_alive_init.is_valid != UCODE_VALID_OK) { - /* We had an error bringing up the hardware, so take it - * all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n"); - goto restart; - } - - /* Bootstrap uCode has loaded initialize uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "initialize" alive if code weren't properly loaded. */ - if (iwl3945_verify_ucode(priv)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n"); - goto restart; - } - - /* Send pointers to protocol/runtime uCode image ... init code will - * load and launch runtime uCode, which will send us another "Alive" - * notification. */ - IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); - if (iwl3945_set_ucode_ptrs(priv)) { - /* Runtime instruction load won't happen; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n"); - goto restart; - } - return; - - restart: - queue_work(priv->workqueue, &priv->restart); -} - -/** - * iwl3945_alive_start - called after REPLY_ALIVE notification received - * from protocol/runtime uCode (initialization uCode's - * Alive gets handled by iwl3945_init_alive_start()). - */ -static void iwl3945_alive_start(struct iwl_priv *priv) -{ - int thermal_spin = 0; - u32 rfkill; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); - - if (priv->card_alive.is_valid != UCODE_VALID_OK) { - /* We had an error bringing up the hardware, so take it - * all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Alive failed.\n"); - goto restart; - } - - /* Initialize uCode has loaded Runtime uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "runtime" alive if code weren't properly loaded. */ - if (iwl3945_verify_ucode(priv)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n"); - goto restart; - } - - rfkill = iwl_read_prph(priv, APMG_RFKILL_REG); - IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill); - - if (rfkill & 0x1) { - clear_bit(STATUS_RF_KILL_HW, &priv->status); - /* if RFKILL is not on, then wait for thermal - * sensor in adapter to kick in */ - while (iwl3945_hw_get_temperature(priv) == 0) { - thermal_spin++; - udelay(10); - } - - if (thermal_spin) - IWL_DEBUG_INFO(priv, "Thermal calibration took %dus\n", - thermal_spin * 10); - } else - set_bit(STATUS_RF_KILL_HW, &priv->status); - - /* After the ALIVE response, we can send commands to 3945 uCode */ - set_bit(STATUS_ALIVE, &priv->status); - - /* Enable watchdog to monitor the driver tx queues */ - iwl_setup_watchdog(priv); - - if (iwl_is_rfkill(priv)) - return; - - ieee80211_wake_queues(priv->hw); - - priv->active_rate = IWL_RATES_MASK; - - iwl_power_update_mode(priv, true); - - if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) { - struct iwl3945_rxon_cmd *active_rxon = - (struct iwl3945_rxon_cmd *)(&ctx->active); - - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - } else { - /* Initialize our rx_config data */ - iwl_connection_init_rx_config(priv, ctx); - } - - /* Configure Bluetooth device coexistence support */ - priv->cfg->ops->hcmd->send_bt_config(priv); - - /* Configure the adapter for unassociated operation */ - iwl3945_commit_rxon(priv, ctx); - - iwl3945_reg_txpower_periodic(priv); - - iwl_leds_init(priv); - - IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); - set_bit(STATUS_READY, &priv->status); - wake_up_interruptible(&priv->wait_command_queue); - - return; - - restart: - queue_work(priv->workqueue, &priv->restart); -} - -static void iwl3945_cancel_deferred_work(struct iwl_priv *priv); - -static void __iwl3945_down(struct iwl_priv *priv) -{ - unsigned long flags; - int exit_pending; - - IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); - - iwl_scan_cancel_timeout(priv, 200); - - exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status); - - /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set - * to prevent rearm timer */ - del_timer_sync(&priv->watchdog); - - /* Station information will now be cleared in device */ - iwl_clear_ucode_stations(priv, NULL); - iwl_dealloc_bcast_stations(priv); - iwl_clear_driver_stations(priv); - - /* Unblock any waiting calls */ - wake_up_interruptible_all(&priv->wait_command_queue); - - /* Wipe out the EXIT_PENDING status bit if we are not actually - * exiting the module */ - if (!exit_pending) - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - /* stop and reset the on-board processor */ - iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - /* tell the device to stop sending interrupts */ - spin_lock_irqsave(&priv->lock, flags); - iwl_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - iwl_synchronize_irq(priv); - - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - /* If we have not previously called iwl3945_init() then - * clear all bits but the RF Kill bits and return */ - if (!iwl_is_init(priv)) { - priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_EXIT_PENDING, &priv->status) << - STATUS_EXIT_PENDING; - goto exit; - } - - /* ...otherwise clear out all the status bits but the RF Kill - * bit and continue taking the NIC down. */ - priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_FW_ERROR, &priv->status) << - STATUS_FW_ERROR | - test_bit(STATUS_EXIT_PENDING, &priv->status) << - STATUS_EXIT_PENDING; - - iwl3945_hw_txq_ctx_stop(priv); - iwl3945_hw_rxq_stop(priv); - - /* Power-down device's busmaster DMA clocks */ - iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); - udelay(5); - - /* Stop the device, and put it in low power state */ - iwl_apm_stop(priv); - - exit: - memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp)); - - if (priv->beacon_skb) - dev_kfree_skb(priv->beacon_skb); - priv->beacon_skb = NULL; - - /* clear out any free frames */ - iwl3945_clear_free_frames(priv); -} - -static void iwl3945_down(struct iwl_priv *priv) -{ - mutex_lock(&priv->mutex); - __iwl3945_down(priv); - mutex_unlock(&priv->mutex); - - iwl3945_cancel_deferred_work(priv); -} - -#define MAX_HW_RESTARTS 5 - -static int iwl3945_alloc_bcast_station(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - unsigned long flags; - u8 sta_id; - - spin_lock_irqsave(&priv->sta_lock, flags); - sta_id = iwl_prep_station(priv, ctx, iwl_bcast_addr, false, NULL); - if (sta_id == IWL_INVALID_STATION) { - IWL_ERR(priv, "Unable to prepare broadcast station\n"); - spin_unlock_irqrestore(&priv->sta_lock, flags); - - return -EINVAL; - } - - priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE; - priv->stations[sta_id].used |= IWL_STA_BCAST; - spin_unlock_irqrestore(&priv->sta_lock, flags); - - return 0; -} - -static int __iwl3945_up(struct iwl_priv *priv) -{ - int rc, i; - - rc = iwl3945_alloc_bcast_station(priv); - if (rc) - return rc; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); - return -EIO; - } - - if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { - IWL_ERR(priv, "ucode not available for device bring up\n"); - return -EIO; - } - - /* If platform's RF_KILL switch is NOT set to KILL */ - if (iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(STATUS_RF_KILL_HW, &priv->status); - else { - set_bit(STATUS_RF_KILL_HW, &priv->status); - IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n"); - return -ENODEV; - } - - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - - rc = iwl3945_hw_nic_init(priv); - if (rc) { - IWL_ERR(priv, "Unable to int nic\n"); - return rc; - } - - /* make sure rfkill handshake bits are cleared */ - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - /* clear (again), then enable host interrupts */ - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - iwl_enable_interrupts(priv); - - /* really make sure rfkill handshake bits are cleared */ - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* Copy original ucode data image from disk into backup cache. - * This will be used to initialize the on-board processor's - * data SRAM for a clean start when the runtime program first loads. */ - memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, - priv->ucode_data.len); - - /* We return success when we resume from suspend and rf_kill is on. */ - if (test_bit(STATUS_RF_KILL_HW, &priv->status)) - return 0; - - for (i = 0; i < MAX_HW_RESTARTS; i++) { - - /* load bootstrap state machine, - * load bootstrap program into processor's memory, - * prepare to load the "initialize" uCode */ - rc = priv->cfg->ops->lib->load_ucode(priv); - - if (rc) { - IWL_ERR(priv, - "Unable to set up bootstrap uCode: %d\n", rc); - continue; - } - - /* start card; "initialize" will load runtime ucode */ - iwl3945_nic_start(priv); - - IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n"); - - return 0; - } - - set_bit(STATUS_EXIT_PENDING, &priv->status); - __iwl3945_down(priv); - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - /* tried to restart and config the device for as long as our - * patience could withstand */ - IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i); - return -EIO; -} - - -/***************************************************************************** - * - * Workqueue callbacks - * - *****************************************************************************/ - -static void iwl3945_bg_init_alive_start(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, init_alive_start.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl3945_init_alive_start(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl3945_bg_alive_start(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, alive_start.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl3945_alive_start(priv); - mutex_unlock(&priv->mutex); -} - -/* - * 3945 cannot interrupt driver when hardware rf kill switch toggles; - * driver must poll CSR_GP_CNTRL_REG register for change. This register - * *is* readable even when device has been SW_RESET into low power mode - * (e.g. during RF KILL). - */ -static void iwl3945_rfkill_poll(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, _3945.rfkill_poll.work); - bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &priv->status); - bool new_rfkill = !(iwl_read32(priv, CSR_GP_CNTRL) - & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); - - if (new_rfkill != old_rfkill) { - if (new_rfkill) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - - wiphy_rfkill_set_hw_state(priv->hw->wiphy, new_rfkill); - - IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n", - new_rfkill ? "disable radio" : "enable radio"); - } - - /* Keep this running, even if radio now enabled. This will be - * cancelled in mac_start() if system decides to start again */ - queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll, - round_jiffies_relative(2 * HZ)); - -} - -int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) -{ - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_CMD, - .len = sizeof(struct iwl3945_scan_cmd), - .flags = CMD_SIZE_HUGE, - }; - struct iwl3945_scan_cmd *scan; - u8 n_probes = 0; - enum ieee80211_band band; - bool is_active = false; - int ret; - - lockdep_assert_held(&priv->mutex); - - if (!priv->scan_cmd) { - priv->scan_cmd = kmalloc(sizeof(struct iwl3945_scan_cmd) + - IWL_MAX_SCAN_SIZE, GFP_KERNEL); - if (!priv->scan_cmd) { - IWL_DEBUG_SCAN(priv, "Fail to allocate scan memory\n"); - return -ENOMEM; - } - } - scan = priv->scan_cmd; - memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE); - - scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; - scan->quiet_time = IWL_ACTIVE_QUIET_TIME; - - if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) { - u16 interval = 0; - u32 extra; - u32 suspend_time = 100; - u32 scan_suspend_time = 100; - unsigned long flags; - - IWL_DEBUG_INFO(priv, "Scanning while associated...\n"); - - spin_lock_irqsave(&priv->lock, flags); - if (priv->is_internal_short_scan) - interval = 0; - else - interval = vif->bss_conf.beacon_int; - spin_unlock_irqrestore(&priv->lock, flags); - - scan->suspend_time = 0; - scan->max_out_time = cpu_to_le32(200 * 1024); - if (!interval) - interval = suspend_time; - /* - * suspend time format: - * 0-19: beacon interval in usec (time before exec.) - * 20-23: 0 - * 24-31: number of beacons (suspend between channels) - */ - - extra = (suspend_time / interval) << 24; - scan_suspend_time = 0xFF0FFFFF & - (extra | ((suspend_time % interval) * 1024)); - - scan->suspend_time = cpu_to_le32(scan_suspend_time); - IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n", - scan_suspend_time, interval); - } - - if (priv->is_internal_short_scan) { - IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n"); - } else if (priv->scan_request->n_ssids) { - int i, p = 0; - IWL_DEBUG_SCAN(priv, "Kicking off active scan\n"); - for (i = 0; i < priv->scan_request->n_ssids; i++) { - /* always does wildcard anyway */ - if (!priv->scan_request->ssids[i].ssid_len) - continue; - scan->direct_scan[p].id = WLAN_EID_SSID; - scan->direct_scan[p].len = - priv->scan_request->ssids[i].ssid_len; - memcpy(scan->direct_scan[p].ssid, - priv->scan_request->ssids[i].ssid, - priv->scan_request->ssids[i].ssid_len); - n_probes++; - p++; - } - is_active = true; - } else - IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n"); - - /* We don't build a direct scan probe request; the uCode will do - * that based on the direct_mask added to each channel entry */ - scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; - scan->tx_cmd.sta_id = priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id; - scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - /* flags + rate selection */ - - switch (priv->scan_band) { - case IEEE80211_BAND_2GHZ: - scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; - scan->tx_cmd.rate = IWL_RATE_1M_PLCP; - band = IEEE80211_BAND_2GHZ; - break; - case IEEE80211_BAND_5GHZ: - scan->tx_cmd.rate = IWL_RATE_6M_PLCP; - band = IEEE80211_BAND_5GHZ; - break; - default: - IWL_WARN(priv, "Invalid scan band\n"); - return -EIO; - } - - /* - * If active scaning is requested but a certain channel - * is marked passive, we can do active scanning if we - * detect transmissions. - */ - scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : - IWL_GOOD_CRC_TH_DISABLED; - - if (!priv->is_internal_short_scan) { - scan->tx_cmd.len = cpu_to_le16( - iwl_fill_probe_req(priv, - (struct ieee80211_mgmt *)scan->data, - vif->addr, - priv->scan_request->ie, - priv->scan_request->ie_len, - IWL_MAX_SCAN_SIZE - sizeof(*scan))); - } else { - /* use bcast addr, will not be transmitted but must be valid */ - scan->tx_cmd.len = cpu_to_le16( - iwl_fill_probe_req(priv, - (struct ieee80211_mgmt *)scan->data, - iwl_bcast_addr, NULL, 0, - IWL_MAX_SCAN_SIZE - sizeof(*scan))); - } - /* select Rx antennas */ - scan->flags |= iwl3945_get_antenna_flags(priv); - - if (priv->is_internal_short_scan) { - scan->channel_count = - iwl3945_get_single_channel_for_scan(priv, vif, band, - (void *)&scan->data[le16_to_cpu( - scan->tx_cmd.len)]); - } else { - scan->channel_count = - iwl3945_get_channels_for_scan(priv, band, is_active, n_probes, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif); - } - - if (scan->channel_count == 0) { - IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); - return -EIO; - } - - cmd.len += le16_to_cpu(scan->tx_cmd.len) + - scan->channel_count * sizeof(struct iwl3945_scan_channel); - cmd.data = scan; - scan->len = cpu_to_le16(cmd.len); - - set_bit(STATUS_SCAN_HW, &priv->status); - ret = iwl_send_cmd_sync(priv, &cmd); - if (ret) - clear_bit(STATUS_SCAN_HW, &priv->status); - return ret; -} - -void iwl3945_post_scan(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - /* - * Since setting the RXON may have been deferred while - * performing the scan, fire one off if needed - */ - if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) - iwl3945_commit_rxon(priv, ctx); -} - -static void iwl3945_bg_restart(struct work_struct *data) -{ - struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) { - struct iwl_rxon_context *ctx; - mutex_lock(&priv->mutex); - for_each_context(priv, ctx) - ctx->vif = NULL; - priv->is_open = 0; - mutex_unlock(&priv->mutex); - iwl3945_down(priv); - ieee80211_restart_hw(priv->hw); - } else { - iwl3945_down(priv); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - __iwl3945_up(priv); - mutex_unlock(&priv->mutex); - } -} - -static void iwl3945_bg_rx_replenish(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, rx_replenish); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl3945_rx_replenish(priv); - mutex_unlock(&priv->mutex); -} - -void iwl3945_post_associate(struct iwl_priv *priv) -{ - int rc = 0; - struct ieee80211_conf *conf = NULL; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - if (!ctx->vif || !priv->is_open) - return; - - if (ctx->vif->type == NL80211_IFTYPE_AP) { - IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__); - return; - } - - IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n", - ctx->vif->bss_conf.aid, ctx->active.bssid_addr); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - iwl_scan_cancel_timeout(priv, 200); - - conf = ieee80211_get_hw_conf(priv->hw); - - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl3945_commit_rxon(priv, ctx); - - rc = iwl_send_rxon_timing(priv, ctx); - if (rc) - IWL_WARN(priv, "REPLY_RXON_TIMING failed - " - "Attempting to continue.\n"); - - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - - ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid); - - IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n", - ctx->vif->bss_conf.aid, ctx->vif->bss_conf.beacon_int); - - if (ctx->vif->bss_conf.use_short_preamble) - ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; - else - ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { - if (ctx->vif->bss_conf.use_short_slot) - ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; - else - ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - } - - iwl3945_commit_rxon(priv, ctx); - - switch (ctx->vif->type) { - case NL80211_IFTYPE_STATION: - iwl3945_rate_scale_init(priv->hw, IWL_AP_ID); - break; - case NL80211_IFTYPE_ADHOC: - iwl3945_send_beacon_cmd(priv); - break; - default: - IWL_ERR(priv, "%s Should not be called in %d mode\n", - __func__, ctx->vif->type); - break; - } -} - -/***************************************************************************** - * - * mac80211 entry point functions - * - *****************************************************************************/ - -#define UCODE_READY_TIMEOUT (2 * HZ) - -static int iwl3945_mac_start(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - int ret; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - /* we should be verifying the device is ready to be opened */ - mutex_lock(&priv->mutex); - - /* fetch ucode file from disk, alloc and copy to bus-master buffers ... - * ucode filename and max sizes are card-specific. */ - - if (!priv->ucode_code.len) { - ret = iwl3945_read_ucode(priv); - if (ret) { - IWL_ERR(priv, "Could not read microcode: %d\n", ret); - mutex_unlock(&priv->mutex); - goto out_release_irq; - } - } - - ret = __iwl3945_up(priv); - - mutex_unlock(&priv->mutex); - - if (ret) - goto out_release_irq; - - IWL_DEBUG_INFO(priv, "Start UP work.\n"); - - /* Wait for START_ALIVE from ucode. Otherwise callbacks from - * mac80211 will not be run successfully. */ - ret = wait_event_interruptible_timeout(priv->wait_command_queue, - test_bit(STATUS_READY, &priv->status), - UCODE_READY_TIMEOUT); - if (!ret) { - if (!test_bit(STATUS_READY, &priv->status)) { - IWL_ERR(priv, - "Wait for START_ALIVE timeout after %dms.\n", - jiffies_to_msecs(UCODE_READY_TIMEOUT)); - ret = -ETIMEDOUT; - goto out_release_irq; - } - } - - /* ucode is running and will send rfkill notifications, - * no need to poll the killswitch state anymore */ - cancel_delayed_work(&priv->_3945.rfkill_poll); - - iwl_led_start(priv); - - priv->is_open = 1; - IWL_DEBUG_MAC80211(priv, "leave\n"); - return 0; - -out_release_irq: - priv->is_open = 0; - IWL_DEBUG_MAC80211(priv, "leave - failed\n"); - return ret; -} - -static void iwl3945_mac_stop(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (!priv->is_open) { - IWL_DEBUG_MAC80211(priv, "leave - skip\n"); - return; - } - - priv->is_open = 0; - - iwl3945_down(priv); - - flush_workqueue(priv->workqueue); - - /* start polling the killswitch state again */ - queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll, - round_jiffies_relative(2 * HZ)); - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, - ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - - if (iwl3945_tx_skb(priv, skb)) - dev_kfree_skb_any(skb); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - return NETDEV_TX_OK; -} - -void iwl3945_config_ap(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct ieee80211_vif *vif = ctx->vif; - int rc = 0; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* The following should be done only at AP bring up */ - if (!(iwl_is_associated(priv, IWL_RXON_CTX_BSS))) { - - /* RXON - unassoc (to set timing command) */ - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl3945_commit_rxon(priv, ctx); - - /* RXON Timing */ - rc = iwl_send_rxon_timing(priv, ctx); - if (rc) - IWL_WARN(priv, "REPLY_RXON_TIMING failed - " - "Attempting to continue.\n"); - - ctx->staging.assoc_id = 0; - - if (vif->bss_conf.use_short_preamble) - ctx->staging.flags |= - RXON_FLG_SHORT_PREAMBLE_MSK; - else - ctx->staging.flags &= - ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { - if (vif->bss_conf.use_short_slot) - ctx->staging.flags |= - RXON_FLG_SHORT_SLOT_MSK; - else - ctx->staging.flags &= - ~RXON_FLG_SHORT_SLOT_MSK; - } - /* restore RXON assoc */ - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - iwl3945_commit_rxon(priv, ctx); - } - iwl3945_send_beacon_cmd(priv); - - /* FIXME - we need to add code here to detect a totally new - * configuration, reset the AP, unassoc, rxon timing, assoc, - * clear sta table, add BCAST sta... */ -} - -static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct ieee80211_key_conf *key) -{ - struct iwl_priv *priv = hw->priv; - int ret = 0; - u8 sta_id = IWL_INVALID_STATION; - u8 static_key; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (iwl3945_mod_params.sw_crypto) { - IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n"); - return -EOPNOTSUPP; - } - - static_key = !iwl_is_associated(priv, IWL_RXON_CTX_BSS); - - if (!static_key) { - sta_id = iwl_sta_id_or_broadcast( - priv, &priv->contexts[IWL_RXON_CTX_BSS], sta); - if (sta_id == IWL_INVALID_STATION) - return -EINVAL; - } - - mutex_lock(&priv->mutex); - iwl_scan_cancel_timeout(priv, 100); - - switch (cmd) { - case SET_KEY: - if (static_key) - ret = iwl3945_set_static_key(priv, key); - else - ret = iwl3945_set_dynamic_key(priv, key, sta_id); - IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n"); - break; - case DISABLE_KEY: - if (static_key) - ret = iwl3945_remove_static_key(priv); - else - ret = iwl3945_clear_sta_key_info(priv, sta_id); - IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n"); - break; - default: - ret = -EINVAL; - } - - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -static int iwl3945_mac_sta_add(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - struct iwl_priv *priv = hw->priv; - struct iwl3945_sta_priv *sta_priv = (void *)sta->drv_priv; - int ret; - bool is_ap = vif->type == NL80211_IFTYPE_STATION; - u8 sta_id; - - IWL_DEBUG_INFO(priv, "received request to add station %pM\n", - sta->addr); - mutex_lock(&priv->mutex); - IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", - sta->addr); - sta_priv->common.sta_id = IWL_INVALID_STATION; - - - ret = iwl_add_station_common(priv, &priv->contexts[IWL_RXON_CTX_BSS], - sta->addr, is_ap, sta, &sta_id); - if (ret) { - IWL_ERR(priv, "Unable to add station %pM (%d)\n", - sta->addr, ret); - /* Should we return success if return code is EEXIST ? */ - mutex_unlock(&priv->mutex); - return ret; - } - - sta_priv->common.sta_id = sta_id; - - /* Initialize rate scaling */ - IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n", - sta->addr); - iwl3945_rs_rate_init(priv, sta, sta_id); - mutex_unlock(&priv->mutex); - - return 0; -} - -static void iwl3945_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - struct iwl_priv *priv = hw->priv; - __le32 filter_or = 0, filter_nand = 0; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - -#define CHK(test, flag) do { \ - if (*total_flags & (test)) \ - filter_or |= (flag); \ - else \ - filter_nand |= (flag); \ - } while (0) - - IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", - changed_flags, *total_flags); - - CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); - CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK); - CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); - -#undef CHK - - mutex_lock(&priv->mutex); - - ctx->staging.filter_flags &= ~filter_nand; - ctx->staging.filter_flags |= filter_or; - - /* - * Not committing directly because hardware can perform a scan, - * but even if hw is ready, committing here breaks for some reason, - * we'll eventually commit the filter flags change anyway. - */ - - mutex_unlock(&priv->mutex); - - /* - * Receiving all multicast frames is always enabled by the - * default flags setup in iwl_connection_init_rx_config() - * since we currently do not support programming multicast - * filters into the device. - */ - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | - FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; -} - - -/***************************************************************************** - * - * sysfs attributes - * - *****************************************************************************/ - -#ifdef CONFIG_IWLWIFI_DEBUG - -/* - * The following adds a new attribute to the sysfs representation - * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/) - * used for controlling the debug level. - * - * See the level definitions in iwl for details. - * - * The debug_level being managed using sysfs below is a per device debug - * level that is used instead of the global debug level if it (the per - * device debug level) is set. - */ -static ssize_t show_debug_level(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv)); -} -static ssize_t store_debug_level(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - unsigned long val; - int ret; - - ret = strict_strtoul(buf, 0, &val); - if (ret) - IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf); - else { - priv->debug_level = val; - if (iwl_alloc_traffic_mem(priv)) - IWL_ERR(priv, - "Not enough memory to generate traffic log\n"); - } - return strnlen(buf, count); -} - -static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, - show_debug_level, store_debug_level); - -#endif /* CONFIG_IWLWIFI_DEBUG */ - -static ssize_t show_temperature(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv)); -} - -static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); - -static ssize_t show_tx_power(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "%d\n", priv->tx_power_user_lmt); -} - -static ssize_t store_tx_power(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - char *p = (char *)buf; - u32 val; - - val = simple_strtoul(p, &p, 10); - if (p == buf) - IWL_INFO(priv, ": %s is not in decimal form.\n", buf); - else - iwl3945_hw_reg_set_txpower(priv, val); - - return count; -} - -static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); - -static ssize_t show_flags(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - return sprintf(buf, "0x%04X\n", ctx->active.flags); -} - -static ssize_t store_flags(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - u32 flags = simple_strtoul(buf, NULL, 0); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - mutex_lock(&priv->mutex); - if (le32_to_cpu(ctx->staging.flags) != flags) { - /* Cancel any currently running scans... */ - if (iwl_scan_cancel_timeout(priv, 100)) - IWL_WARN(priv, "Could not cancel scan.\n"); - else { - IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n", - flags); - ctx->staging.flags = cpu_to_le32(flags); - iwl3945_commit_rxon(priv, ctx); - } - } - mutex_unlock(&priv->mutex); - - return count; -} - -static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags); - -static ssize_t show_filter_flags(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - return sprintf(buf, "0x%04X\n", - le32_to_cpu(ctx->active.filter_flags)); -} - -static ssize_t store_filter_flags(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - u32 filter_flags = simple_strtoul(buf, NULL, 0); - - mutex_lock(&priv->mutex); - if (le32_to_cpu(ctx->staging.filter_flags) != filter_flags) { - /* Cancel any currently running scans... */ - if (iwl_scan_cancel_timeout(priv, 100)) - IWL_WARN(priv, "Could not cancel scan.\n"); - else { - IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = " - "0x%04X\n", filter_flags); - ctx->staging.filter_flags = - cpu_to_le32(filter_flags); - iwl3945_commit_rxon(priv, ctx); - } - } - mutex_unlock(&priv->mutex); - - return count; -} - -static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, - store_filter_flags); - -static ssize_t show_measurement(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl_spectrum_notification measure_report; - u32 size = sizeof(measure_report), len = 0, ofs = 0; - u8 *data = (u8 *)&measure_report; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (!(priv->measurement_status & MEASUREMENT_READY)) { - spin_unlock_irqrestore(&priv->lock, flags); - return 0; - } - memcpy(&measure_report, &priv->measure_report, size); - priv->measurement_status = 0; - spin_unlock_irqrestore(&priv->lock, flags); - - while (size && (PAGE_SIZE - len)) { - hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, - PAGE_SIZE - len, 1); - len = strlen(buf); - if (PAGE_SIZE - len) - buf[len++] = '\n'; - - ofs += 16; - size -= min(size, 16U); - } - - return len; -} - -static ssize_t store_measurement(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct ieee80211_measurement_params params = { - .channel = le16_to_cpu(ctx->active.channel), - .start_time = cpu_to_le64(priv->_3945.last_tsf), - .duration = cpu_to_le16(1), - }; - u8 type = IWL_MEASURE_BASIC; - u8 buffer[32]; - u8 channel; - - if (count) { - char *p = buffer; - strncpy(buffer, buf, min(sizeof(buffer), count)); - channel = simple_strtoul(p, NULL, 0); - if (channel) - params.channel = channel; - - p = buffer; - while (*p && *p != ' ') - p++; - if (*p) - type = simple_strtoul(p + 1, NULL, 0); - } - - IWL_DEBUG_INFO(priv, "Invoking measurement of type %d on " - "channel %d (for '%s')\n", type, params.channel, buf); - iwl3945_get_measurement(priv, ¶ms, type); - - return count; -} - -static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, - show_measurement, store_measurement); - -static ssize_t store_retry_rate(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - priv->retry_rate = simple_strtoul(buf, NULL, 0); - if (priv->retry_rate <= 0) - priv->retry_rate = 1; - - return count; -} - -static ssize_t show_retry_rate(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "%d", priv->retry_rate); -} - -static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate, - store_retry_rate); - - -static ssize_t show_channels(struct device *d, - struct device_attribute *attr, char *buf) -{ - /* all this shit doesn't belong into sysfs anyway */ - return 0; -} - -static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL); - -static ssize_t show_antenna(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - return sprintf(buf, "%d\n", iwl3945_mod_params.antenna); -} - -static ssize_t store_antenna(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv __maybe_unused = dev_get_drvdata(d); - int ant; - - if (count == 0) - return 0; - - if (sscanf(buf, "%1i", &ant) != 1) { - IWL_DEBUG_INFO(priv, "not in hex or decimal form.\n"); - return count; - } - - if ((ant >= 0) && (ant <= 2)) { - IWL_DEBUG_INFO(priv, "Setting antenna select to %d.\n", ant); - iwl3945_mod_params.antenna = (enum iwl3945_antenna)ant; - } else - IWL_DEBUG_INFO(priv, "Bad antenna select value %d.\n", ant); - - - return count; -} - -static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna); - -static ssize_t show_status(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - if (!iwl_is_alive(priv)) - return -EAGAIN; - return sprintf(buf, "0x%08x\n", (int)priv->status); -} - -static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); - -static ssize_t dump_error_log(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - char *p = (char *)buf; - - if (p[0] == '1') - iwl3945_dump_nic_error_log(priv); - - return strnlen(buf, count); -} - -static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log); - -/***************************************************************************** - * - * driver setup and tear down - * - *****************************************************************************/ - -static void iwl3945_setup_deferred_work(struct iwl_priv *priv) -{ - priv->workqueue = create_singlethread_workqueue(DRV_NAME); - - init_waitqueue_head(&priv->wait_command_queue); - - INIT_WORK(&priv->restart, iwl3945_bg_restart); - INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish); - INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update); - INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start); - INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start); - INIT_DELAYED_WORK(&priv->_3945.rfkill_poll, iwl3945_rfkill_poll); - - iwl_setup_scan_deferred_work(priv); - - iwl3945_hw_setup_deferred_work(priv); - - init_timer(&priv->watchdog); - priv->watchdog.data = (unsigned long)priv; - priv->watchdog.function = iwl_bg_watchdog; - - tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) - iwl3945_irq_tasklet, (unsigned long)priv); -} - -static void iwl3945_cancel_deferred_work(struct iwl_priv *priv) -{ - iwl3945_hw_cancel_deferred_work(priv); - - cancel_delayed_work_sync(&priv->init_alive_start); - cancel_delayed_work(&priv->alive_start); - cancel_work_sync(&priv->beacon_update); - - iwl_cancel_scan_deferred_work(priv); -} - -static struct attribute *iwl3945_sysfs_entries[] = { - &dev_attr_antenna.attr, - &dev_attr_channels.attr, - &dev_attr_dump_errors.attr, - &dev_attr_flags.attr, - &dev_attr_filter_flags.attr, - &dev_attr_measurement.attr, - &dev_attr_retry_rate.attr, - &dev_attr_status.attr, - &dev_attr_temperature.attr, - &dev_attr_tx_power.attr, -#ifdef CONFIG_IWLWIFI_DEBUG - &dev_attr_debug_level.attr, -#endif - NULL -}; - -static struct attribute_group iwl3945_attribute_group = { - .name = NULL, /* put in device directory */ - .attrs = iwl3945_sysfs_entries, -}; - -struct ieee80211_ops iwl3945_hw_ops = { - .tx = iwl3945_mac_tx, - .start = iwl3945_mac_start, - .stop = iwl3945_mac_stop, - .add_interface = iwl_mac_add_interface, - .remove_interface = iwl_mac_remove_interface, - .change_interface = iwl_mac_change_interface, - .config = iwl_legacy_mac_config, - .configure_filter = iwl3945_configure_filter, - .set_key = iwl3945_mac_set_key, - .conf_tx = iwl_mac_conf_tx, - .reset_tsf = iwl_legacy_mac_reset_tsf, - .bss_info_changed = iwl_legacy_mac_bss_info_changed, - .hw_scan = iwl_mac_hw_scan, - .sta_add = iwl3945_mac_sta_add, - .sta_remove = iwl_mac_sta_remove, - .tx_last_beacon = iwl_mac_tx_last_beacon, -}; - -static int iwl3945_init_drv(struct iwl_priv *priv) -{ - int ret; - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - - priv->retry_rate = 1; - priv->beacon_skb = NULL; - - spin_lock_init(&priv->sta_lock); - spin_lock_init(&priv->hcmd_lock); - - INIT_LIST_HEAD(&priv->free_frames); - - mutex_init(&priv->mutex); - mutex_init(&priv->sync_cmd_mutex); - - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - - priv->iw_mode = NL80211_IFTYPE_STATION; - priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; - - /* initialize force reset */ - priv->force_reset[IWL_RF_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_RF_RESET; - priv->force_reset[IWL_FW_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_FW_RELOAD; - - - priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER; - priv->tx_power_next = IWL_DEFAULT_TX_POWER; - - if (eeprom->version < EEPROM_3945_EEPROM_VERSION) { - IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n", - eeprom->version); - ret = -EINVAL; - goto err; - } - ret = iwl_init_channel_map(priv); - if (ret) { - IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); - goto err; - } - - /* Set up txpower settings in driver for all channels */ - if (iwl3945_txpower_set_from_eeprom(priv)) { - ret = -EIO; - goto err_free_channel_map; - } - - ret = iwlcore_init_geos(priv); - if (ret) { - IWL_ERR(priv, "initializing geos failed: %d\n", ret); - goto err_free_channel_map; - } - iwl3945_init_hw_rates(priv, priv->ieee_rates); - - return 0; - -err_free_channel_map: - iwl_free_channel_map(priv); -err: - return ret; -} - -#define IWL3945_MAX_PROBE_REQUEST 200 - -static int iwl3945_setup_mac(struct iwl_priv *priv) -{ - int ret; - struct ieee80211_hw *hw = priv->hw; - - hw->rate_control_algorithm = "iwl-3945-rs"; - hw->sta_data_size = sizeof(struct iwl3945_sta_priv); - hw->vif_data_size = sizeof(struct iwl_vif_priv); - - /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SPECTRUM_MGMT; - - if (!priv->cfg->base_params->broken_powersave) - hw->flags |= IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_DYNAMIC_PS; - - hw->wiphy->interface_modes = - priv->contexts[IWL_RXON_CTX_BSS].interface_modes; - - hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | - WIPHY_FLAG_DISABLE_BEACON_HINTS; - - hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945; - /* we create the 802.11 header and a zero-length SSID element */ - hw->wiphy->max_scan_ie_len = IWL3945_MAX_PROBE_REQUEST - 24 - 2; - - /* Default value; 4 EDCA QOS priorities */ - hw->queues = 4; - - if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &priv->bands[IEEE80211_BAND_2GHZ]; - - if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &priv->bands[IEEE80211_BAND_5GHZ]; - - ret = ieee80211_register_hw(priv->hw); - if (ret) { - IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); - return ret; - } - priv->mac80211_registered = 1; - - return 0; -} - -static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int err = 0, i; - struct iwl_priv *priv; - struct ieee80211_hw *hw; - struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); - struct iwl3945_eeprom *eeprom; - unsigned long flags; - - /*********************** - * 1. Allocating HW data - * ********************/ - - /* mac80211 allocates memory for this device instance, including - * space for this driver's private structure */ - hw = iwl_alloc_all(cfg); - if (hw == NULL) { - pr_err("Can not allocate network device\n"); - err = -ENOMEM; - goto out; - } - priv = hw->priv; - SET_IEEE80211_DEV(hw, &pdev->dev); - - priv->cmd_queue = IWL39_CMD_QUEUE_NUM; - - /* 3945 has only one valid context */ - priv->valid_contexts = BIT(IWL_RXON_CTX_BSS); - - for (i = 0; i < NUM_IWL_RXON_CTX; i++) - priv->contexts[i].ctxid = i; - - priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; - priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; - priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; - priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; - priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; - priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; - priv->contexts[IWL_RXON_CTX_BSS].interface_modes = - BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC); - priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; - priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; - priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; - - /* - * Disabling hardware scan means that mac80211 will perform scans - * "the hard way", rather than using device's scan. - */ - if (iwl3945_mod_params.disable_hw_scan) { - dev_printk(KERN_DEBUG, &(pdev->dev), - "sw scan support is deprecated\n"); - iwl3945_hw_ops.hw_scan = NULL; - } - - - IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); - priv->cfg = cfg; - priv->pci_dev = pdev; - priv->inta_mask = CSR_INI_SET_MASK; - - if (iwl_alloc_traffic_mem(priv)) - IWL_ERR(priv, "Not enough memory to generate traffic log\n"); - - /*************************** - * 2. Initializing PCI bus - * *************************/ - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | - PCIE_LINK_STATE_CLKPM); - - if (pci_enable_device(pdev)) { - err = -ENODEV; - goto out_ieee80211_free_hw; - } - - pci_set_master(pdev); - - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); - if (err) { - IWL_WARN(priv, "No suitable DMA available.\n"); - goto out_pci_disable_device; - } - - pci_set_drvdata(pdev, priv); - err = pci_request_regions(pdev, DRV_NAME); - if (err) - goto out_pci_disable_device; - - /*********************** - * 3. Read REV Register - * ********************/ - priv->hw_base = pci_iomap(pdev, 0, 0); - if (!priv->hw_base) { - err = -ENODEV; - goto out_pci_release_regions; - } - - IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n", - (unsigned long long) pci_resource_len(pdev, 0)); - IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base); - - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, 0x41, 0x00); - - /* these spin locks will be used in apm_ops.init and EEPROM access - * we should init now - */ - spin_lock_init(&priv->reg_lock); - spin_lock_init(&priv->lock); - - /* - * stop and reset the on-board processor just in case it is in a - * strange state ... like being left stranded by a primary kernel - * and this is now the kdump kernel trying to start up - */ - iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - /*********************** - * 4. Read EEPROM - * ********************/ - - /* Read the EEPROM */ - err = iwl_eeprom_init(priv); - if (err) { - IWL_ERR(priv, "Unable to init EEPROM\n"); - goto out_iounmap; - } - /* MAC Address location in EEPROM same for 3945/4965 */ - eeprom = (struct iwl3945_eeprom *)priv->eeprom; - IWL_DEBUG_INFO(priv, "MAC address: %pM\n", eeprom->mac_address); - SET_IEEE80211_PERM_ADDR(priv->hw, eeprom->mac_address); - - /*********************** - * 5. Setup HW Constants - * ********************/ - /* Device-specific setup */ - if (iwl3945_hw_set_hw_params(priv)) { - IWL_ERR(priv, "failed to set hw settings\n"); - goto out_eeprom_free; - } - - /*********************** - * 6. Setup priv - * ********************/ - - err = iwl3945_init_drv(priv); - if (err) { - IWL_ERR(priv, "initializing driver failed\n"); - goto out_unset_hw_params; - } - - IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n", - priv->cfg->name); - - /*********************** - * 7. Setup Services - * ********************/ - - spin_lock_irqsave(&priv->lock, flags); - iwl_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - pci_enable_msi(priv->pci_dev); - - err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr, - IRQF_SHARED, DRV_NAME, priv); - if (err) { - IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq); - goto out_disable_msi; - } - - err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group); - if (err) { - IWL_ERR(priv, "failed to create sysfs device attributes\n"); - goto out_release_irq; - } - - iwl_set_rxon_channel(priv, - &priv->bands[IEEE80211_BAND_2GHZ].channels[5], - &priv->contexts[IWL_RXON_CTX_BSS]); - iwl3945_setup_deferred_work(priv); - iwl3945_setup_rx_handlers(priv); - iwl_power_initialize(priv); - - /********************************* - * 8. Setup and Register mac80211 - * *******************************/ - - iwl_enable_interrupts(priv); - - err = iwl3945_setup_mac(priv); - if (err) - goto out_remove_sysfs; - - err = iwl_dbgfs_register(priv, DRV_NAME); - if (err) - IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err); - - /* Start monitoring the killswitch */ - queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll, - 2 * HZ); - - return 0; - - out_remove_sysfs: - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); - out_release_irq: - free_irq(priv->pci_dev->irq, priv); - out_disable_msi: - pci_disable_msi(priv->pci_dev); - iwlcore_free_geos(priv); - iwl_free_channel_map(priv); - out_unset_hw_params: - iwl3945_unset_hw_params(priv); - out_eeprom_free: - iwl_eeprom_free(priv); - out_iounmap: - pci_iounmap(pdev, priv->hw_base); - out_pci_release_regions: - pci_release_regions(pdev); - out_pci_disable_device: - pci_set_drvdata(pdev, NULL); - pci_disable_device(pdev); - out_ieee80211_free_hw: - iwl_free_traffic_mem(priv); - ieee80211_free_hw(priv->hw); - out: - return err; -} - -static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - unsigned long flags; - - if (!priv) - return; - - IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); - - iwl_dbgfs_unregister(priv); - - set_bit(STATUS_EXIT_PENDING, &priv->status); - - if (priv->mac80211_registered) { - ieee80211_unregister_hw(priv->hw); - priv->mac80211_registered = 0; - } else { - iwl3945_down(priv); - } - - /* - * Make sure device is reset to low power before unloading driver. - * This may be redundant with iwl_down(), but there are paths to - * run iwl_down() without calling apm_ops.stop(), and there are - * paths to avoid running iwl_down() at all before leaving driver. - * This (inexpensive) call *makes sure* device is reset. - */ - iwl_apm_stop(priv); - - /* make sure we flush any pending irq or - * tasklet for the driver - */ - spin_lock_irqsave(&priv->lock, flags); - iwl_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_synchronize_irq(priv); - - sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); - - cancel_delayed_work_sync(&priv->_3945.rfkill_poll); - - iwl3945_dealloc_ucode_pci(priv); - - if (priv->rxq.bd) - iwl3945_rx_queue_free(priv, &priv->rxq); - iwl3945_hw_txq_ctx_free(priv); - - iwl3945_unset_hw_params(priv); - - /*netif_stop_queue(dev); */ - flush_workqueue(priv->workqueue); - - /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes - * priv->workqueue... so we can't take down the workqueue - * until now... */ - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - iwl_free_traffic_mem(priv); - - free_irq(pdev->irq, priv); - pci_disable_msi(pdev); - - pci_iounmap(pdev, priv->hw_base); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - - iwl_free_channel_map(priv); - iwlcore_free_geos(priv); - kfree(priv->scan_cmd); - if (priv->beacon_skb) - dev_kfree_skb(priv->beacon_skb); - - ieee80211_free_hw(priv->hw); -} - - -/***************************************************************************** - * - * driver and module entry point - * - *****************************************************************************/ - -static struct pci_driver iwl3945_driver = { - .name = DRV_NAME, - .id_table = iwl3945_hw_card_ids, - .probe = iwl3945_pci_probe, - .remove = __devexit_p(iwl3945_pci_remove), - .driver.pm = IWL_PM_OPS, -}; - -static int __init iwl3945_init(void) -{ - - int ret; - pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); - pr_info(DRV_COPYRIGHT "\n"); - - ret = iwl3945_rate_control_register(); - if (ret) { - pr_err("Unable to register rate control algorithm: %d\n", ret); - return ret; - } - - ret = pci_register_driver(&iwl3945_driver); - if (ret) { - pr_err("Unable to initialize PCI module\n"); - goto error_register; - } - - return ret; - -error_register: - iwl3945_rate_control_unregister(); - return ret; -} - -static void __exit iwl3945_exit(void) -{ - pci_unregister_driver(&iwl3945_driver); - iwl3945_rate_control_unregister(); -} - -MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX)); - -module_param_named(antenna, iwl3945_mod_params.antenna, int, S_IRUGO); -MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); -module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, S_IRUGO); -MODULE_PARM_DESC(swcrypto, - "using software crypto (default 1 [software])\n"); -#ifdef CONFIG_IWLWIFI_DEBUG -module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "debug output mask"); -#endif -module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, - int, S_IRUGO); -MODULE_PARM_DESC(disable_hw_scan, - "disable hardware scanning (default 0) (deprecated)"); -module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, S_IRUGO); -MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error"); - -module_exit(iwl3945_exit); -module_init(iwl3945_init); |