diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c new file mode 100644 index 000000000000..b428448f8ddf --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c @@ -0,0 +1,292 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#include <net/mac80211.h> +#include "fw-api.h" +#include "mvm.h" + +/* Maps the driver specific channel width definition to the the fw values */ +static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef) +{ + switch (chandef->width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + return PHY_VHT_CHANNEL_MODE20; + case NL80211_CHAN_WIDTH_40: + return PHY_VHT_CHANNEL_MODE40; + case NL80211_CHAN_WIDTH_80: + return PHY_VHT_CHANNEL_MODE80; + case NL80211_CHAN_WIDTH_160: + return PHY_VHT_CHANNEL_MODE160; + default: + WARN(1, "Invalid channel width=%u", chandef->width); + return PHY_VHT_CHANNEL_MODE20; + } +} + +/* + * Maps the driver specific control channel position (relative to the center + * freq) definitions to the the fw values + */ +static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef) +{ + switch (chandef->chan->center_freq - chandef->center_freq1) { + case -70: + return PHY_VHT_CTRL_POS_4_BELOW; + case -50: + return PHY_VHT_CTRL_POS_3_BELOW; + case -30: + return PHY_VHT_CTRL_POS_2_BELOW; + case -10: + return PHY_VHT_CTRL_POS_1_BELOW; + case 10: + return PHY_VHT_CTRL_POS_1_ABOVE; + case 30: + return PHY_VHT_CTRL_POS_2_ABOVE; + case 50: + return PHY_VHT_CTRL_POS_3_ABOVE; + case 70: + return PHY_VHT_CTRL_POS_4_ABOVE; + default: + WARN(1, "Invalid channel definition"); + case 0: + /* + * The FW is expected to check the control channel position only + * when in HT/VHT and the channel width is not 20MHz. Return + * this value as the default one. + */ + return PHY_VHT_CTRL_POS_1_BELOW; + } +} + +/* + * Construct the generic fields of the PHY context command + */ +static void iwl_mvm_phy_ctxt_cmd_hdr(struct iwl_mvm_phy_ctxt *ctxt, + struct iwl_phy_context_cmd *cmd, + u32 action, u32 apply_time) +{ + memset(cmd, 0, sizeof(struct iwl_phy_context_cmd)); + + cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(ctxt->id, + ctxt->color)); + cmd->action = cpu_to_le32(action); + cmd->apply_time = cpu_to_le32(apply_time); +} + +/* + * Add the phy configuration to the PHY context command + */ +static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm *mvm, + struct iwl_phy_context_cmd *cmd, + struct cfg80211_chan_def *chandef, + u8 chains_static, u8 chains_dynamic) +{ + u8 valid_rx_chains, active_cnt, idle_cnt; + + /* Set the channel info data */ + cmd->ci.band = (chandef->chan->band == IEEE80211_BAND_2GHZ ? + PHY_BAND_24 : PHY_BAND_5); + + cmd->ci.channel = chandef->chan->hw_value; + cmd->ci.width = iwl_mvm_get_channel_width(chandef); + cmd->ci.ctrl_pos = iwl_mvm_get_ctrl_pos(chandef); + + /* Set rx the chains */ + + /* TODO: + * Need to add on chain noise calibration limitations, and + * BT coex considerations. + */ + valid_rx_chains = mvm->nvm_data->valid_rx_ant; + idle_cnt = chains_static; + active_cnt = chains_dynamic; + + cmd->rxchain_info = cpu_to_le32(valid_rx_chains << + PHY_RX_CHAIN_VALID_POS); + cmd->rxchain_info |= cpu_to_le32(idle_cnt << PHY_RX_CHAIN_CNT_POS); + cmd->rxchain_info |= cpu_to_le32(active_cnt << + PHY_RX_CHAIN_MIMO_CNT_POS); + + cmd->txchain_info = cpu_to_le32(mvm->nvm_data->valid_tx_ant); +} + +/* + * Send a command to apply the current phy configuration. The command is send + * only if something in the configuration changed: in case that this is the + * first time that the phy configuration is applied or in case that the phy + * configuration changed from the previous apply. + */ +static int iwl_mvm_phy_ctxt_apply(struct iwl_mvm *mvm, + struct iwl_mvm_phy_ctxt *ctxt, + struct cfg80211_chan_def *chandef, + u8 chains_static, u8 chains_dynamic, + u32 action, u32 apply_time) +{ + struct iwl_phy_context_cmd cmd; + int ret; + + /* Set the command header fields */ + iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, action, apply_time); + + /* Set the command data */ + iwl_mvm_phy_ctxt_cmd_data(mvm, &cmd, chandef, + chains_static, chains_dynamic); + + ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC, + sizeof(struct iwl_phy_context_cmd), + &cmd); + if (ret) + IWL_ERR(mvm, "PHY ctxt cmd error. ret=%d\n", ret); + return ret; +} + + +struct phy_ctx_used_data { + unsigned long used[BITS_TO_LONGS(NUM_PHY_CTX)]; +}; + +static void iwl_mvm_phy_ctx_used_iter(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx, + void *_data) +{ + struct phy_ctx_used_data *data = _data; + struct iwl_mvm_phy_ctxt *phy_ctxt = (void *)ctx->drv_priv; + + __set_bit(phy_ctxt->id, data->used); +} + +/* + * Send a command to add a PHY context based on the current HW configuration. + */ +int iwl_mvm_phy_ctxt_add(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt, + struct cfg80211_chan_def *chandef, + u8 chains_static, u8 chains_dynamic) +{ + struct phy_ctx_used_data data = { + .used = { }, + }; + + /* + * If this is a regular PHY context (not the ROC one) + * skip the ROC PHY context's ID. + */ + if (ctxt != &mvm->phy_ctxt_roc) + __set_bit(mvm->phy_ctxt_roc.id, data.used); + + lockdep_assert_held(&mvm->mutex); + ctxt->color++; + + if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) { + ieee80211_iter_chan_contexts_atomic( + mvm->hw, iwl_mvm_phy_ctx_used_iter, &data); + + ctxt->id = find_first_zero_bit(data.used, NUM_PHY_CTX); + if (WARN_ONCE(ctxt->id == NUM_PHY_CTX, + "Failed to init PHY context - no free ID!\n")) + return -EIO; + } + + ctxt->channel = chandef->chan; + return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef, + chains_static, chains_dynamic, + FW_CTXT_ACTION_ADD, 0); +} + +/* + * Send a command to modify the PHY context based on the current HW + * configuration. Note that the function does not check that the configuration + * changed. + */ +int iwl_mvm_phy_ctxt_changed(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt, + struct cfg80211_chan_def *chandef, + u8 chains_static, u8 chains_dynamic) +{ + lockdep_assert_held(&mvm->mutex); + + ctxt->channel = chandef->chan; + return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef, + chains_static, chains_dynamic, + FW_CTXT_ACTION_MODIFY, 0); +} + +/* + * Send a command to the FW to remove the given phy context. + * Once the command is sent, regardless of success or failure, the context is + * marked as invalid + */ +void iwl_mvm_phy_ctxt_remove(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt) +{ + struct iwl_phy_context_cmd cmd; + int ret; + + lockdep_assert_held(&mvm->mutex); + + iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, FW_CTXT_ACTION_REMOVE, 0); + ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC, + sizeof(struct iwl_phy_context_cmd), + &cmd); + if (ret) + IWL_ERR(mvm, "Failed to send PHY remove: ctxt id=%d\n", + ctxt->id); +} |