diff options
Diffstat (limited to 'drivers/net/wireless/marvell/libertas/rx.c')
| -rw-r--r-- | drivers/net/wireless/marvell/libertas/rx.c | 286 |
1 files changed, 286 insertions, 0 deletions
diff --git a/drivers/net/wireless/marvell/libertas/rx.c b/drivers/net/wireless/marvell/libertas/rx.c new file mode 100644 index 000000000000..e446fed7b345 --- /dev/null +++ b/drivers/net/wireless/marvell/libertas/rx.c @@ -0,0 +1,286 @@ +/* + * This file contains the handling of RX in wlan driver. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/etherdevice.h> +#include <linux/hardirq.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/export.h> +#include <net/cfg80211.h> + +#include "defs.h" +#include "host.h" +#include "radiotap.h" +#include "decl.h" +#include "dev.h" +#include "mesh.h" + +struct eth803hdr { + u8 dest_addr[6]; + u8 src_addr[6]; + u16 h803_len; +} __packed; + +struct rfc1042hdr { + u8 llc_dsap; + u8 llc_ssap; + u8 llc_ctrl; + u8 snap_oui[3]; + u16 snap_type; +} __packed; + +struct rxpackethdr { + struct eth803hdr eth803_hdr; + struct rfc1042hdr rfc1042_hdr; +} __packed; + +struct rx80211packethdr { + struct rxpd rx_pd; + void *eth80211_hdr; +} __packed; + +static int process_rxed_802_11_packet(struct lbs_private *priv, + struct sk_buff *skb); + +/** + * lbs_process_rxed_packet - processes received packet and forwards it + * to kernel/upper layer + * + * @priv: A pointer to &struct lbs_private + * @skb: A pointer to skb which includes the received packet + * returns: 0 or -1 + */ +int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) +{ + int ret = 0; + struct net_device *dev = priv->dev; + struct rxpackethdr *p_rx_pkt; + struct rxpd *p_rx_pd; + int hdrchop; + struct ethhdr *p_ethhdr; + static const u8 rfc1042_eth_hdr[] = { + 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 + }; + + lbs_deb_enter(LBS_DEB_RX); + + BUG_ON(!skb); + + skb->ip_summed = CHECKSUM_NONE; + + if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) { + ret = process_rxed_802_11_packet(priv, skb); + goto done; + } + + p_rx_pd = (struct rxpd *) skb->data; + p_rx_pkt = (struct rxpackethdr *) ((u8 *)p_rx_pd + + le32_to_cpu(p_rx_pd->pkt_ptr)); + + dev = lbs_mesh_set_dev(priv, dev, p_rx_pd); + + lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data, + min_t(unsigned int, skb->len, 100)); + + if (skb->len < (ETH_HLEN + 8 + sizeof(struct rxpd))) { + lbs_deb_rx("rx err: frame received with bad length\n"); + dev->stats.rx_length_errors++; + ret = -EINVAL; + dev_kfree_skb(skb); + goto done; + } + + lbs_deb_rx("rx data: skb->len - pkt_ptr = %d-%zd = %zd\n", + skb->len, (size_t)le32_to_cpu(p_rx_pd->pkt_ptr), + skb->len - (size_t)le32_to_cpu(p_rx_pd->pkt_ptr)); + + lbs_deb_hex(LBS_DEB_RX, "RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr, + sizeof(p_rx_pkt->eth803_hdr.dest_addr)); + lbs_deb_hex(LBS_DEB_RX, "RX Data: Src", p_rx_pkt->eth803_hdr.src_addr, + sizeof(p_rx_pkt->eth803_hdr.src_addr)); + + if (memcmp(&p_rx_pkt->rfc1042_hdr, + rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr)) == 0) { + /* + * Replace the 803 header and rfc1042 header (llc/snap) with an + * EthernetII header, keep the src/dst and snap_type (ethertype) + * + * The firmware only passes up SNAP frames converting + * all RX Data from 802.11 to 802.2/LLC/SNAP frames. + * + * To create the Ethernet II, just move the src, dst address right + * before the snap_type. + */ + p_ethhdr = (struct ethhdr *) + ((u8 *) &p_rx_pkt->eth803_hdr + + sizeof(p_rx_pkt->eth803_hdr) + sizeof(p_rx_pkt->rfc1042_hdr) + - sizeof(p_rx_pkt->eth803_hdr.dest_addr) + - sizeof(p_rx_pkt->eth803_hdr.src_addr) + - sizeof(p_rx_pkt->rfc1042_hdr.snap_type)); + + memcpy(p_ethhdr->h_source, p_rx_pkt->eth803_hdr.src_addr, + sizeof(p_ethhdr->h_source)); + memcpy(p_ethhdr->h_dest, p_rx_pkt->eth803_hdr.dest_addr, + sizeof(p_ethhdr->h_dest)); + + /* Chop off the rxpd + the excess memory from the 802.2/llc/snap header + * that was removed + */ + hdrchop = (u8 *)p_ethhdr - (u8 *)p_rx_pd; + } else { + lbs_deb_hex(LBS_DEB_RX, "RX Data: LLC/SNAP", + (u8 *) &p_rx_pkt->rfc1042_hdr, + sizeof(p_rx_pkt->rfc1042_hdr)); + + /* Chop off the rxpd */ + hdrchop = (u8 *)&p_rx_pkt->eth803_hdr - (u8 *)p_rx_pd; + } + + /* Chop off the leading header bytes so the skb points to the start of + * either the reconstructed EthII frame or the 802.2/llc/snap frame + */ + skb_pull(skb, hdrchop); + + priv->cur_rate = lbs_fw_index_to_data_rate(p_rx_pd->rx_rate); + + lbs_deb_rx("rx data: size of actual packet %d\n", skb->len); + dev->stats.rx_bytes += skb->len; + dev->stats.rx_packets++; + + skb->protocol = eth_type_trans(skb, dev); + if (in_interrupt()) + netif_rx(skb); + else + netif_rx_ni(skb); + + ret = 0; +done: + lbs_deb_leave_args(LBS_DEB_RX, "ret %d", ret); + return ret; +} +EXPORT_SYMBOL_GPL(lbs_process_rxed_packet); + +/** + * convert_mv_rate_to_radiotap - converts Tx/Rx rates from Marvell WLAN format + * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s) + * + * @rate: Input rate + * returns: Output Rate (0 if invalid) + */ +static u8 convert_mv_rate_to_radiotap(u8 rate) +{ + switch (rate) { + case 0: /* 1 Mbps */ + return 2; + case 1: /* 2 Mbps */ + return 4; + case 2: /* 5.5 Mbps */ + return 11; + case 3: /* 11 Mbps */ + return 22; + /* case 4: reserved */ + case 5: /* 6 Mbps */ + return 12; + case 6: /* 9 Mbps */ + return 18; + case 7: /* 12 Mbps */ + return 24; + case 8: /* 18 Mbps */ + return 36; + case 9: /* 24 Mbps */ + return 48; + case 10: /* 36 Mbps */ + return 72; + case 11: /* 48 Mbps */ + return 96; + case 12: /* 54 Mbps */ + return 108; + } + pr_alert("Invalid Marvell WLAN rate %i\n", rate); + return 0; +} + +/** + * process_rxed_802_11_packet - processes a received 802.11 packet and forwards + * it to kernel/upper layer + * + * @priv: A pointer to &struct lbs_private + * @skb: A pointer to skb which includes the received packet + * returns: 0 or -1 + */ +static int process_rxed_802_11_packet(struct lbs_private *priv, + struct sk_buff *skb) +{ + int ret = 0; + struct net_device *dev = priv->dev; + struct rx80211packethdr *p_rx_pkt; + struct rxpd *prxpd; + struct rx_radiotap_hdr radiotap_hdr; + struct rx_radiotap_hdr *pradiotap_hdr; + + lbs_deb_enter(LBS_DEB_RX); + + p_rx_pkt = (struct rx80211packethdr *) skb->data; + prxpd = &p_rx_pkt->rx_pd; + + /* lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data, min(skb->len, 100)); */ + + if (skb->len < (ETH_HLEN + 8 + sizeof(struct rxpd))) { + lbs_deb_rx("rx err: frame received with bad length\n"); + dev->stats.rx_length_errors++; + ret = -EINVAL; + kfree_skb(skb); + goto done; + } + + lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n", + skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd)); + + /* create the exported radio header */ + + /* radiotap header */ + memset(&radiotap_hdr, 0, sizeof(radiotap_hdr)); + /* XXX must check radiotap_hdr.hdr.it_pad for pad */ + radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr)); + radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT); + radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate); + /* XXX must check no carryout */ + radiotap_hdr.antsignal = prxpd->snr + prxpd->nf; + + /* chop the rxpd */ + skb_pull(skb, sizeof(struct rxpd)); + + /* add space for the new radio header */ + if ((skb_headroom(skb) < sizeof(struct rx_radiotap_hdr)) && + pskb_expand_head(skb, sizeof(struct rx_radiotap_hdr), 0, GFP_ATOMIC)) { + netdev_alert(dev, "%s: couldn't pskb_expand_head\n", __func__); + ret = -ENOMEM; + kfree_skb(skb); + goto done; + } + + pradiotap_hdr = (void *)skb_push(skb, sizeof(struct rx_radiotap_hdr)); + memcpy(pradiotap_hdr, &radiotap_hdr, sizeof(struct rx_radiotap_hdr)); + + priv->cur_rate = lbs_fw_index_to_data_rate(prxpd->rx_rate); + + lbs_deb_rx("rx data: size of actual packet %d\n", skb->len); + dev->stats.rx_bytes += skb->len; + dev->stats.rx_packets++; + + skb->protocol = eth_type_trans(skb, priv->dev); + + if (in_interrupt()) + netif_rx(skb); + else + netif_rx_ni(skb); + + ret = 0; + +done: + lbs_deb_leave_args(LBS_DEB_RX, "ret %d", ret); + return ret; +} |