diff options
Diffstat (limited to 'drivers/net/wireless/prism54/isl_oid.h')
| -rw-r--r-- | drivers/net/wireless/prism54/isl_oid.h | 32 |
1 files changed, 15 insertions, 17 deletions
diff --git a/drivers/net/wireless/prism54/isl_oid.h b/drivers/net/wireless/prism54/isl_oid.h index 419edf7ccf1a..ab5322768a4a 100644 --- a/drivers/net/wireless/prism54/isl_oid.h +++ b/drivers/net/wireless/prism54/isl_oid.h @@ -1,6 +1,4 @@ /* - * - * * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> * Copyright (C) 2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr> @@ -23,7 +21,7 @@ #if !defined(_ISL_OID_H) #define _ISL_OID_H -/* +/* * MIB related constant and structure definitions for communicating * with the device firmware */ @@ -99,7 +97,7 @@ struct obj_attachment { char data[0]; } __attribute__((packed)); -/* +/* * in case everything's ok, the inlined function below will be * optimized away by the compiler... */ @@ -154,13 +152,13 @@ enum dot11_priv_t { /* Prism "Nitro" / Frameburst / "Packet Frame Grouping" * Value is in microseconds. Represents the # microseconds - * the firmware will take to group frames before sending out then out + * the firmware will take to group frames before sending out then out * together with a CSMA contention. Without this all frames are - * sent with a CSMA contention. - * Bibliography: + * sent with a CSMA contention. + * Bibliography: * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html */ -enum dot11_maxframeburst_t { +enum dot11_maxframeburst_t { /* Values for DOT11_OID_MAXFRAMEBURST */ DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */ DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */ @@ -176,9 +174,9 @@ enum dot11_maxframeburst_t { /* Support for 802.11 long and short frame preambles. * Long preamble uses 128-bit sync field, 8-bit CRC * Short preamble uses 56-bit sync field, 16-bit CRC - * + * * 802.11a -- not sure, both optionally ? - * 802.11b supports long and optionally short + * 802.11b supports long and optionally short * 802.11g supports both */ enum dot11_preamblesettings_t { DOT11_PREAMBLESETTING_LONG = 0, @@ -194,7 +192,7 @@ enum dot11_preamblesettings_t { * Long uses 802.11a slot timing (9 usec ?) * Short uses 802.11b slot timing (20 use ?) */ enum dot11_slotsettings_t { - DOT11_SLOTSETTINGS_LONG = 0, + DOT11_SLOTSETTINGS_LONG = 0, /* Allows *only* long 802.11b slot timing */ DOT11_SLOTSETTINGS_SHORT = 1, /* Allows *only* long 802.11a slot timing */ @@ -203,7 +201,7 @@ enum dot11_slotsettings_t { }; /* All you need to know, ERP is "Extended Rate PHY". - * An Extended Rate PHY (ERP) STA or AP shall support three different + * An Extended Rate PHY (ERP) STA or AP shall support three different * preamble and header formats: * Long preamble (refer to above) * Short preamble (refer to above) @@ -221,7 +219,7 @@ enum do11_nonerpstatus_t { /* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-* * The key here is DOT11 NON ERP NEVER protects against * NON ERP STA's. You *don't* want this unless - * you know what you are doing. It means you will only + * you know what you are doing. It means you will only * get Extended Rate capabilities */ enum dot11_nonerpprotection_t { DOT11_NONERP_NEVER = 0, @@ -229,13 +227,13 @@ enum dot11_nonerpprotection_t { DOT11_NONERP_DYNAMIC = 2 }; -/* Preset OID configuration for 802.11 modes - * Note: DOT11_OID_CW[MIN|MAX] hold the values of the +/* Preset OID configuration for 802.11 modes + * Note: DOT11_OID_CW[MIN|MAX] hold the values of the * DCS MIN|MAX backoff used */ enum dot11_profile_t { /* And set/allowed values */ /* Allowed values for DOT11_OID_PROFILES */ DOT11_PROFILE_B_ONLY = 0, - /* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps + /* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC * DOT11_OID_CWMIN: 31 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC @@ -275,7 +273,7 @@ enum oid_inl_conformance_t { OID_INL_CONFORMANCE_NONE = 0, /* Perform active scanning */ OID_INL_CONFORMANCE_STRICT = 1, /* Strictly adhere to 802.11d */ OID_INL_CONFORMANCE_FLEXIBLE = 2, /* Use passed 802.11d info to - * determine channel AND/OR just make assumption that active + * determine channel AND/OR just make assumption that active * channels are valid channels */ }; |