diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8192cu/hw.c')
| -rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 34 |
1 files changed, 26 insertions, 8 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c index 270cbffcac70..873363acbacf 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c @@ -36,8 +36,11 @@ #include "reg.h" #include "def.h" #include "phy.h" +#include "../rtl8192c/phy_common.h" #include "mac.h" #include "dm.h" +#include "../rtl8192c/dm_common.h" +#include "../rtl8192c/fw_common.h" #include "hw.h" #include "../rtl8192ce/hw.h" #include "trx.h" @@ -180,7 +183,7 @@ static void _rtl92cu_read_txpower_info_from_hwpg(struct ieee80211_hw *hw, eprom_chnl_txpwr_ht40_2sdf[rf_path][i]); for (rf_path = 0; rf_path < 2; rf_path++) { for (i = 0; i < 14; i++) { - index = _rtl92c_get_chnl_group((u8) i); + index = rtl92c_get_chnl_group((u8)i); rtlefuse->txpwrlevel_cck[rf_path][i] = rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][index]; rtlefuse->txpwrlevel_ht40_1s[rf_path][i] = @@ -222,7 +225,7 @@ static void _rtl92cu_read_txpower_info_from_hwpg(struct ieee80211_hw *hw, } for (rf_path = 0; rf_path < 2; rf_path++) { for (i = 0; i < 14; i++) { - index = _rtl92c_get_chnl_group((u8) i); + index = rtl92c_get_chnl_group((u8)i); if (rf_path == RF90_PATH_A) { rtlefuse->pwrgroup_ht20[rf_path][i] = (rtlefuse->eeprom_pwrlimit_ht20[index] @@ -249,7 +252,7 @@ static void _rtl92cu_read_txpower_info_from_hwpg(struct ieee80211_hw *hw, } } for (i = 0; i < 14; i++) { - index = _rtl92c_get_chnl_group((u8) i); + index = rtl92c_get_chnl_group((u8)i); if (!autoload_fail) tempval = hwinfo[EEPROM_TXPOWERHT20DIFF + index]; else @@ -261,7 +264,7 @@ static void _rtl92cu_read_txpower_info_from_hwpg(struct ieee80211_hw *hw, rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] |= 0xF0; if (rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] & BIT(3)) rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] |= 0xF0; - index = _rtl92c_get_chnl_group((u8) i); + index = rtl92c_get_chnl_group((u8)i); if (!autoload_fail) tempval = hwinfo[EEPROM_TXPOWER_OFDMDIFF + index]; else @@ -1169,13 +1172,13 @@ n. LEDCFG 0x4C[15:0] = 0x8080 /* 1. Disable GPIO[7:0] */ rtl_write_word(rtlpriv, REG_GPIO_PIN_CTRL+2, 0x0000); value32 = rtl_read_dword(rtlpriv, REG_GPIO_PIN_CTRL) & 0xFFFF00FF; - value8 = (u8) (value32&0x000000FF); + value8 = (u8)(value32&0x000000FF); value32 |= ((value8<<8) | 0x00FF0000); rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, value32); /* 2. Disable GPIO[10:8] */ rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG+3, 0x00); value16 = rtl_read_word(rtlpriv, REG_GPIO_MUXCFG+2) & 0xFF0F; - value8 = (u8) (value16&0x000F); + value8 = (u8)(value16&0x000F); value16 |= ((value8<<4) | 0x0780); rtl_write_word(rtlpriv, REG_GPIO_PIN_CTRL+2, value16); /* 3. Disable LED0 & 1 */ @@ -1245,7 +1248,7 @@ static void _rtl92cu_set_bcn_ctrl_reg(struct ieee80211_hw *hw, rtlusb->reg_bcn_ctrl_val |= set_bits; rtlusb->reg_bcn_ctrl_val &= ~clear_bits; - rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlusb->reg_bcn_ctrl_val); + rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8)rtlusb->reg_bcn_ctrl_val); } static void _rtl92cu_stop_tx_beacon(struct ieee80211_hw *hw) @@ -1589,6 +1592,20 @@ void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) } } +bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + /* Currently nothing happens here. + * Traffic stops after some seconds in WPA2 802.11n mode. + * Maybe because rtl8192cu chip should be set from here? + * If I understand correctly, the realtek vendor driver sends some urbs + * if its "here". + * + * This is maybe necessary: + * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb); + */ + return true; +} + void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) { struct rtl_priv *rtlpriv = rtl_priv(hw); @@ -1936,7 +1953,8 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) recover = true; rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp_reg422 & (~BIT(6))); - rtl92c_set_fw_rsvdpagepkt(hw, 0); + rtl92c_set_fw_rsvdpagepkt(hw, + &usb_cmd_send_packet); _rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0); _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4)); if (recover) |