diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/boot.c')
-rw-r--r-- | drivers/net/wireless/wl12xx/boot.c | 605 |
1 files changed, 605 insertions, 0 deletions
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c new file mode 100644 index 000000000000..4df04f84d7f1 --- /dev/null +++ b/drivers/net/wireless/wl12xx/boot.c @@ -0,0 +1,605 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2010 Nokia Corporation + * + * Contact: Luciano Coelho <luciano.coelho@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/slab.h> + +#include "acx.h" +#include "reg.h" +#include "boot.h" +#include "io.h" +#include "event.h" + +static struct wl1271_partition_set part_table[PART_TABLE_LEN] = { + [PART_DOWN] = { + .mem = { + .start = 0x00000000, + .size = 0x000177c0 + }, + .reg = { + .start = REGISTERS_BASE, + .size = 0x00008800 + }, + .mem2 = { + .start = 0x00000000, + .size = 0x00000000 + }, + .mem3 = { + .start = 0x00000000, + .size = 0x00000000 + }, + }, + + [PART_WORK] = { + .mem = { + .start = 0x00040000, + .size = 0x00014fc0 + }, + .reg = { + .start = REGISTERS_BASE, + .size = 0x0000a000 + }, + .mem2 = { + .start = 0x003004f8, + .size = 0x00000004 + }, + .mem3 = { + .start = 0x00040404, + .size = 0x00000000 + }, + }, + + [PART_DRPW] = { + .mem = { + .start = 0x00040000, + .size = 0x00014fc0 + }, + .reg = { + .start = DRPW_BASE, + .size = 0x00006000 + }, + .mem2 = { + .start = 0x00000000, + .size = 0x00000000 + }, + .mem3 = { + .start = 0x00000000, + .size = 0x00000000 + } + } +}; + +static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag) +{ + u32 cpu_ctrl; + + /* 10.5.0 run the firmware (I) */ + cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL); + + /* 10.5.1 run the firmware (II) */ + cpu_ctrl |= flag; + wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl); +} + +static void wl1271_boot_fw_version(struct wl1271 *wl) +{ + struct wl1271_static_data static_data; + + wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data), + false); + + strncpy(wl->chip.fw_ver, static_data.fw_version, + sizeof(wl->chip.fw_ver)); + + /* make sure the string is NULL-terminated */ + wl->chip.fw_ver[sizeof(wl->chip.fw_ver) - 1] = '\0'; +} + +static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, + size_t fw_data_len, u32 dest) +{ + struct wl1271_partition_set partition; + int addr, chunk_num, partition_limit; + u8 *p, *chunk; + + /* whal_FwCtrl_LoadFwImageSm() */ + + wl1271_debug(DEBUG_BOOT, "starting firmware upload"); + + wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d", + fw_data_len, CHUNK_SIZE); + + if ((fw_data_len % 4) != 0) { + wl1271_error("firmware length not multiple of four"); + return -EIO; + } + + chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL); + if (!chunk) { + wl1271_error("allocation for firmware upload chunk failed"); + return -ENOMEM; + } + + memcpy(&partition, &part_table[PART_DOWN], sizeof(partition)); + partition.mem.start = dest; + wl1271_set_partition(wl, &partition); + + /* 10.1 set partition limit and chunk num */ + chunk_num = 0; + partition_limit = part_table[PART_DOWN].mem.size; + + while (chunk_num < fw_data_len / CHUNK_SIZE) { + /* 10.2 update partition, if needed */ + addr = dest + (chunk_num + 2) * CHUNK_SIZE; + if (addr > partition_limit) { + addr = dest + chunk_num * CHUNK_SIZE; + partition_limit = chunk_num * CHUNK_SIZE + + part_table[PART_DOWN].mem.size; + partition.mem.start = addr; + wl1271_set_partition(wl, &partition); + } + + /* 10.3 upload the chunk */ + addr = dest + chunk_num * CHUNK_SIZE; + p = buf + chunk_num * CHUNK_SIZE; + memcpy(chunk, p, CHUNK_SIZE); + wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x", + p, addr); + wl1271_write(wl, addr, chunk, CHUNK_SIZE, false); + + chunk_num++; + } + + /* 10.4 upload the last chunk */ + addr = dest + chunk_num * CHUNK_SIZE; + p = buf + chunk_num * CHUNK_SIZE; + memcpy(chunk, p, fw_data_len % CHUNK_SIZE); + wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x", + fw_data_len % CHUNK_SIZE, p, addr); + wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false); + + kfree(chunk); + return 0; +} + +static int wl1271_boot_upload_firmware(struct wl1271 *wl) +{ + u32 chunks, addr, len; + int ret = 0; + u8 *fw; + + fw = wl->fw; + chunks = be32_to_cpup((__be32 *) fw); + fw += sizeof(u32); + + wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks); + + while (chunks--) { + addr = be32_to_cpup((__be32 *) fw); + fw += sizeof(u32); + len = be32_to_cpup((__be32 *) fw); + fw += sizeof(u32); + + if (len > 300000) { + wl1271_info("firmware chunk too long: %u", len); + return -EINVAL; + } + wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u", + chunks, addr, len); + ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr); + if (ret != 0) + break; + fw += len; + } + + return ret; +} + +static int wl1271_boot_upload_nvs(struct wl1271 *wl) +{ + size_t nvs_len, burst_len; + int i; + u32 dest_addr, val; + u8 *nvs_ptr, *nvs_aligned; + + if (wl->nvs == NULL) + return -ENODEV; + + /* + * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz band + * configurations) can be removed when those NVS files stop floating + * around. + */ + if (wl->nvs_len == sizeof(struct wl1271_nvs_file) || + wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) { + if (wl->nvs->general_params.dual_mode_select) + wl->enable_11a = true; + } + + if (wl->nvs_len != sizeof(struct wl1271_nvs_file) && + (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE || + wl->enable_11a)) { + wl1271_error("nvs size is not as expected: %zu != %zu", + wl->nvs_len, sizeof(struct wl1271_nvs_file)); + kfree(wl->nvs); + wl->nvs = NULL; + wl->nvs_len = 0; + return -EILSEQ; + } + + /* only the first part of the NVS needs to be uploaded */ + nvs_len = sizeof(wl->nvs->nvs); + nvs_ptr = (u8 *)wl->nvs->nvs; + + /* update current MAC address to NVS */ + nvs_ptr[11] = wl->mac_addr[0]; + nvs_ptr[10] = wl->mac_addr[1]; + nvs_ptr[6] = wl->mac_addr[2]; + nvs_ptr[5] = wl->mac_addr[3]; + nvs_ptr[4] = wl->mac_addr[4]; + nvs_ptr[3] = wl->mac_addr[5]; + + /* + * Layout before the actual NVS tables: + * 1 byte : burst length. + * 2 bytes: destination address. + * n bytes: data to burst copy. + * + * This is ended by a 0 length, then the NVS tables. + */ + + /* FIXME: Do we need to check here whether the LSB is 1? */ + while (nvs_ptr[0]) { + burst_len = nvs_ptr[0]; + dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8)); + + /* + * Due to our new wl1271_translate_reg_addr function, + * we need to add the REGISTER_BASE to the destination + */ + dest_addr += REGISTERS_BASE; + + /* We move our pointer to the data */ + nvs_ptr += 3; + + for (i = 0; i < burst_len; i++) { + val = (nvs_ptr[0] | (nvs_ptr[1] << 8) + | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); + + wl1271_debug(DEBUG_BOOT, + "nvs burst write 0x%x: 0x%x", + dest_addr, val); + wl1271_write32(wl, dest_addr, val); + + nvs_ptr += 4; + dest_addr += 4; + } + } + + /* + * We've reached the first zero length, the first NVS table + * is located at an aligned offset which is at least 7 bytes further. + */ + nvs_ptr = (u8 *)wl->nvs->nvs + + ALIGN(nvs_ptr - (u8 *)wl->nvs->nvs + 7, 4); + nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs; + + /* Now we must set the partition correctly */ + wl1271_set_partition(wl, &part_table[PART_WORK]); + + /* Copy the NVS tables to a new block to ensure alignment */ + nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL); + if (!nvs_aligned) + return -ENOMEM; + + /* And finally we upload the NVS tables */ + wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false); + + kfree(nvs_aligned); + return 0; +} + +static void wl1271_boot_enable_interrupts(struct wl1271 *wl) +{ + wl1271_enable_interrupts(wl); + wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, + WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK)); + wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL); +} + +static int wl1271_boot_soft_reset(struct wl1271 *wl) +{ + unsigned long timeout; + u32 boot_data; + + /* perform soft reset */ + wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT); + + /* SOFT_RESET is self clearing */ + timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME); + while (1) { + boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET); + wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data); + if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0) + break; + + if (time_after(jiffies, timeout)) { + /* 1.2 check pWhalBus->uSelfClearTime if the + * timeout was reached */ + wl1271_error("soft reset timeout"); + return -1; + } + + udelay(SOFT_RESET_STALL_TIME); + } + + /* disable Rx/Tx */ + wl1271_write32(wl, ENABLE, 0x0); + + /* disable auto calibration on start*/ + wl1271_write32(wl, SPARE_A2, 0xffff); + + return 0; +} + +static int wl1271_boot_run_firmware(struct wl1271 *wl) +{ + int loop, ret; + u32 chip_id, intr; + + wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT); + + chip_id = wl1271_read32(wl, CHIP_ID_B); + + wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id); + + if (chip_id != wl->chip.id) { + wl1271_error("chip id doesn't match after firmware boot"); + return -EIO; + } + + /* wait for init to complete */ + loop = 0; + while (loop++ < INIT_LOOP) { + udelay(INIT_LOOP_DELAY); + intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + + if (intr == 0xffffffff) { + wl1271_error("error reading hardware complete " + "init indication"); + return -EIO; + } + /* check that ACX_INTR_INIT_COMPLETE is enabled */ + else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) { + wl1271_write32(wl, ACX_REG_INTERRUPT_ACK, + WL1271_ACX_INTR_INIT_COMPLETE); + break; + } + } + + if (loop > INIT_LOOP) { + wl1271_error("timeout waiting for the hardware to " + "complete initialization"); + return -EIO; + } + + /* get hardware config command mail box */ + wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR); + + /* get hardware config event mail box */ + wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR); + + /* set the working partition to its "running" mode offset */ + wl1271_set_partition(wl, &part_table[PART_WORK]); + + wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x", + wl->cmd_box_addr, wl->event_box_addr); + + wl1271_boot_fw_version(wl); + + /* + * in case of full asynchronous mode the firmware event must be + * ready to receive event from the command mailbox + */ + + /* unmask required mbox events */ + wl->event_mask = BSS_LOSE_EVENT_ID | + SCAN_COMPLETE_EVENT_ID | + PS_REPORT_EVENT_ID | + JOIN_EVENT_COMPLETE_ID | + DISCONNECT_EVENT_COMPLETE_ID | + RSSI_SNR_TRIGGER_0_EVENT_ID | + PSPOLL_DELIVERY_FAILURE_EVENT_ID | + SOFT_GEMINI_SENSE_EVENT_ID; + + ret = wl1271_event_unmask(wl); + if (ret < 0) { + wl1271_error("EVENT mask setting failed"); + return ret; + } + + wl1271_event_mbox_config(wl); + + /* firmware startup completed */ + return 0; +} + +static int wl1271_boot_write_irq_polarity(struct wl1271 *wl) +{ + u32 polarity; + + polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY); + + /* We use HIGH polarity, so unset the LOW bit */ + polarity &= ~POLARITY_LOW; + wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity); + + return 0; +} + +static void wl1271_boot_hw_version(struct wl1271 *wl) +{ + u32 fuse; + + fuse = wl1271_top_reg_read(wl, REG_FUSE_DATA_2_1); + fuse = (fuse & PG_VER_MASK) >> PG_VER_OFFSET; + + wl->hw_pg_ver = (s8)fuse; +} + +/* uploads NVS and firmware */ +int wl1271_load_firmware(struct wl1271 *wl) +{ + int ret = 0; + u32 tmp, clk, pause; + + wl1271_boot_hw_version(wl); + + if (wl->ref_clock == 0 || wl->ref_clock == 2 || wl->ref_clock == 4) + /* ref clk: 19.2/38.4/38.4-XTAL */ + clk = 0x3; + else if (wl->ref_clock == 1 || wl->ref_clock == 3) + /* ref clk: 26/52 */ + clk = 0x5; + else + return -EINVAL; + + if (wl->ref_clock != 0) { + u16 val; + /* Set clock type (open drain) */ + val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE); + val &= FREF_CLK_TYPE_BITS; + wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val); + + /* Set clock pull mode (no pull) */ + val = wl1271_top_reg_read(wl, OCP_REG_CLK_PULL); + val |= NO_PULL; + wl1271_top_reg_write(wl, OCP_REG_CLK_PULL, val); + } else { + u16 val; + /* Set clock polarity */ + val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY); + val &= FREF_CLK_POLARITY_BITS; + val |= CLK_REQ_OUTN_SEL; + wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val); + } + + wl1271_write32(wl, PLL_PARAMETERS, clk); + + pause = wl1271_read32(wl, PLL_PARAMETERS); + + wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause); + + pause &= ~(WU_COUNTER_PAUSE_VAL); + pause |= WU_COUNTER_PAUSE_VAL; + wl1271_write32(wl, WU_COUNTER_PAUSE, pause); + + /* Continue the ELP wake up sequence */ + wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); + udelay(500); + + wl1271_set_partition(wl, &part_table[PART_DRPW]); + + /* Read-modify-write DRPW_SCRATCH_START register (see next state) + to be used by DRPw FW. The RTRIM value will be added by the FW + before taking DRPw out of reset */ + + wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START); + clk = wl1271_read32(wl, DRPW_SCRATCH_START); + + wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk); + + clk |= (wl->ref_clock << 1) << 4; + wl1271_write32(wl, DRPW_SCRATCH_START, clk); + + wl1271_set_partition(wl, &part_table[PART_WORK]); + + /* Disable interrupts */ + wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); + + ret = wl1271_boot_soft_reset(wl); + if (ret < 0) + goto out; + + /* 2. start processing NVS file */ + ret = wl1271_boot_upload_nvs(wl); + if (ret < 0) + goto out; + + /* write firmware's last address (ie. it's length) to + * ACX_EEPROMLESS_IND_REG */ + wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG"); + + wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG); + + tmp = wl1271_read32(wl, CHIP_ID_B); + + wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); + + /* 6. read the EEPROM parameters */ + tmp = wl1271_read32(wl, SCR_PAD2); + + ret = wl1271_boot_write_irq_polarity(wl); + if (ret < 0) + goto out; + + wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, + WL1271_ACX_ALL_EVENTS_VECTOR); + + /* WL1271: The reference driver skips steps 7 to 10 (jumps directly + * to upload_fw) */ + + ret = wl1271_boot_upload_firmware(wl); + if (ret < 0) + goto out; + +out: + return ret; +} +EXPORT_SYMBOL_GPL(wl1271_load_firmware); + +int wl1271_boot(struct wl1271 *wl) +{ + int ret; + + /* upload NVS and firmware */ + ret = wl1271_load_firmware(wl); + if (ret) + return ret; + + /* 10.5 start firmware */ + ret = wl1271_boot_run_firmware(wl); + if (ret < 0) + goto out; + + /* Enable firmware interrupts now */ + wl1271_boot_enable_interrupts(wl); + + /* set the wl1271 default filters */ + wl->rx_config = WL1271_DEFAULT_RX_CONFIG; + wl->rx_filter = WL1271_DEFAULT_RX_FILTER; + + wl1271_event_mbox_config(wl); + +out: + return ret; +} |