diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/wireless/Kconfig | 39 | ||||
| -rw-r--r-- | drivers/net/wireless/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/i82586.h | 413 | ||||
| -rw-r--r-- | drivers/net/wireless/i82593.h | 229 | ||||
| -rw-r--r-- | drivers/net/wireless/wavelan.c | 4383 | ||||
| -rw-r--r-- | drivers/net/wireless/wavelan.h | 370 | ||||
| -rw-r--r-- | drivers/net/wireless/wavelan.p.h | 696 | ||||
| -rw-r--r-- | drivers/net/wireless/wavelan_cs.c | 4635 | ||||
| -rw-r--r-- | drivers/net/wireless/wavelan_cs.h | 386 | ||||
| -rw-r--r-- | drivers/net/wireless/wavelan_cs.p.h | 766 |
10 files changed, 0 insertions, 11919 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index d50b3bee9a9b..f94188f05a02 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -25,45 +25,6 @@ menuconfig WLAN_PRE80211 This option does not affect the kernel build, it only lets you choose drivers. -config WAVELAN - tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" - depends on ISA && WLAN_PRE80211 - select WIRELESS_EXT - select WEXT_SPY - select WEXT_PRIV - ---help--- - The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is - a Radio LAN (wireless Ethernet-like Local Area Network) using the - radio frequencies 900 MHz and 2.4 GHz. - - If you want to use an ISA WaveLAN card under Linux, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Some more specific - information is contained in - <file:Documentation/networking/wavelan.txt> and in the source code - <file:drivers/net/wireless/wavelan.p.h>. - - You will also need the wireless tools package available from - <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. - Please read the man pages contained therein. - - To compile this driver as a module, choose M here: the module will be - called wavelan. - -config PCMCIA_WAVELAN - tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" - depends on PCMCIA && WLAN_PRE80211 - select WIRELESS_EXT - select WEXT_SPY - select WEXT_PRIV - help - Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA - (PC-card) wireless Ethernet networking card to your computer. This - driver is for the non-IEEE-802.11 Wavelan cards. - - To compile this driver as a module, choose M here: the module will be - called wavelan_cs. If unsure, say N. - config PCMCIA_NETWAVE tristate "Xircom Netwave AirSurfer Pcmcia wireless support" depends on PCMCIA && WLAN_PRE80211 diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index b56c70f4ca75..f4a7c8ae27ea 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -6,9 +6,7 @@ obj-$(CONFIG_IPW2100) += ipw2x00/ obj-$(CONFIG_IPW2200) += ipw2x00/ # Obsolete cards -obj-$(CONFIG_WAVELAN) += wavelan.o obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o -obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o obj-$(CONFIG_HERMES) += orinoco/ diff --git a/drivers/net/wireless/i82586.h b/drivers/net/wireless/i82586.h deleted file mode 100644 index 5f65b250646f..000000000000 --- a/drivers/net/wireless/i82586.h +++ /dev/null @@ -1,413 +0,0 @@ -/* - * Intel 82586 IEEE 802.3 Ethernet LAN Coprocessor. - * - * See: - * Intel Microcommunications 1991 - * p1-1 to p1-37 - * Intel order No. 231658 - * ISBN 1-55512-119-5 - * - * Unfortunately, the above chapter mentions neither - * the System Configuration Pointer (SCP) nor the - * Intermediate System Configuration Pointer (ISCP), - * so we probably need to look elsewhere for the - * whole story -- some recommend the "Intel LAN - * Components manual" but I have neither a copy - * nor a full reference. But "elsewhere" may be - * in the same publication... - * The description of a later device, the - * "82596CA High-Performance 32-Bit Local Area Network - * Coprocessor", (ibid. p1-38 to p1-109) does mention - * the SCP and ISCP and also has an i82586 compatibility - * mode. Even more useful is "AP-235 An 82586 Data Link - * Driver" (ibid. p1-337 to p1-417). - */ - -#define I82586_MEMZ (64 * 1024) - -#define I82586_SCP_ADDR (I82586_MEMZ - sizeof(scp_t)) - -#define ADDR_LEN 6 -#define I82586NULL 0xFFFF - -#define toff(t,p,f) (unsigned short)((void *)(&((t *)((void *)0 + (p)))->f) - (void *)0) - -/* - * System Configuration Pointer (SCP). - */ -typedef struct scp_t scp_t; -struct scp_t -{ - unsigned short scp_sysbus; /* 82586 bus width: */ -#define SCP_SY_16BBUS (0x0 << 0) /* 16 bits */ -#define SCP_SY_8BBUS (0x1 << 0) /* 8 bits. */ - unsigned short scp_junk[2]; /* Unused */ - unsigned short scp_iscpl; /* lower 16 bits of ISCP_ADDR */ - unsigned short scp_iscph; /* upper 16 bits of ISCP_ADDR */ -}; - -/* - * Intermediate System Configuration Pointer (ISCP). - */ -typedef struct iscp_t iscp_t; -struct iscp_t -{ - unsigned short iscp_busy; /* set by CPU before first CA, */ - /* cleared by 82586 after read. */ - unsigned short iscp_offset; /* offset of SCB */ - unsigned short iscp_basel; /* base of SCB */ - unsigned short iscp_baseh; /* " */ -}; - -/* - * System Control Block (SCB). - * The 82586 writes its status to scb_status and then - * raises an interrupt to alert the CPU. - * The CPU writes a command to scb_command and - * then issues a Channel Attention (CA) to alert the 82586. - */ -typedef struct scb_t scb_t; -struct scb_t -{ - unsigned short scb_status; /* Status of 82586 */ -#define SCB_ST_INT (0xF << 12) /* Some of: */ -#define SCB_ST_CX (0x1 << 15) /* Cmd completed */ -#define SCB_ST_FR (0x1 << 14) /* Frame received */ -#define SCB_ST_CNA (0x1 << 13) /* Cmd unit not active */ -#define SCB_ST_RNR (0x1 << 12) /* Rcv unit not ready */ -#define SCB_ST_JUNK0 (0x1 << 11) /* 0 */ -#define SCB_ST_CUS (0x7 << 8) /* Cmd unit status */ -#define SCB_ST_CUS_IDLE (0 << 8) /* Idle */ -#define SCB_ST_CUS_SUSP (1 << 8) /* Suspended */ -#define SCB_ST_CUS_ACTV (2 << 8) /* Active */ -#define SCB_ST_JUNK1 (0x1 << 7) /* 0 */ -#define SCB_ST_RUS (0x7 << 4) /* Rcv unit status */ -#define SCB_ST_RUS_IDLE (0 << 4) /* Idle */ -#define SCB_ST_RUS_SUSP (1 << 4) /* Suspended */ -#define SCB_ST_RUS_NRES (2 << 4) /* No resources */ -#define SCB_ST_RUS_RDY (4 << 4) /* Ready */ - unsigned short scb_command; /* Next command */ -#define SCB_CMD_ACK_CX (0x1 << 15) /* Ack cmd completion */ -#define SCB_CMD_ACK_FR (0x1 << 14) /* Ack frame received */ -#define SCB_CMD_ACK_CNA (0x1 << 13) /* Ack CU not active */ -#define SCB_CMD_ACK_RNR (0x1 << 12) /* Ack RU not ready */ -#define SCB_CMD_JUNKX (0x1 << 11) /* Unused */ -#define SCB_CMD_CUC (0x7 << 8) /* Command Unit command */ -#define SCB_CMD_CUC_NOP (0 << 8) /* Nop */ -#define SCB_CMD_CUC_GO (1 << 8) /* Start cbl_offset */ -#define SCB_CMD_CUC_RES (2 << 8) /* Resume execution */ -#define SCB_CMD_CUC_SUS (3 << 8) /* Suspend " */ -#define SCB_CMD_CUC_ABT (4 << 8) /* Abort " */ -#define SCB_CMD_RESET (0x1 << 7) /* Reset chip (hardware) */ -#define SCB_CMD_RUC (0x7 << 4) /* Receive Unit command */ -#define SCB_CMD_RUC_NOP (0 << 4) /* Nop */ -#define SCB_CMD_RUC_GO (1 << 4) /* Start rfa_offset */ -#define SCB_CMD_RUC_RES (2 << 4) /* Resume reception */ -#define SCB_CMD_RUC_SUS (3 << 4) /* Suspend " */ -#define SCB_CMD_RUC_ABT (4 << 4) /* Abort " */ - unsigned short scb_cbl_offset; /* Offset of first command unit */ - /* Action Command */ - unsigned short scb_rfa_offset; /* Offset of first Receive */ - /* Frame Descriptor in the */ - /* Receive Frame Area */ - unsigned short scb_crcerrs; /* Properly aligned frames */ - /* received with a CRC error */ - unsigned short scb_alnerrs; /* Misaligned frames received */ - /* with a CRC error */ - unsigned short scb_rscerrs; /* Frames lost due to no space */ - unsigned short scb_ovrnerrs; /* Frames lost due to slow bus */ -}; - -#define scboff(p,f) toff(scb_t, p, f) - -/* - * The eight Action Commands. - */ -typedef enum acmd_e acmd_e; -enum acmd_e -{ - acmd_nop = 0, /* Do nothing */ - acmd_ia_setup = 1, /* Load an (ethernet) address into the */ - /* 82586 */ - acmd_configure = 2, /* Update the 82586 operating parameters */ - acmd_mc_setup = 3, /* Load a list of (ethernet) multicast */ - /* addresses into the 82586 */ - acmd_transmit = 4, /* Transmit a frame */ - acmd_tdr = 5, /* Perform a Time Domain Reflectometer */ - /* test on the serial link */ - acmd_dump = 6, /* Copy 82586 registers to memory */ - acmd_diagnose = 7, /* Run an internal self test */ -}; - -/* - * Generic Action Command header. - */ -typedef struct ach_t ach_t; -struct ach_t -{ - unsigned short ac_status; /* Command status: */ -#define AC_SFLD_C (0x1 << 15) /* Command completed */ -#define AC_SFLD_B (0x1 << 14) /* Busy executing */ -#define AC_SFLD_OK (0x1 << 13) /* Completed error free */ -#define AC_SFLD_A (0x1 << 12) /* Command aborted */ -#define AC_SFLD_FAIL (0x1 << 11) /* Selftest failed */ -#define AC_SFLD_S10 (0x1 << 10) /* No carrier sense */ - /* during transmission */ -#define AC_SFLD_S9 (0x1 << 9) /* Tx unsuccessful: */ - /* (stopped) lost CTS */ -#define AC_SFLD_S8 (0x1 << 8) /* Tx unsuccessful: */ - /* (stopped) slow DMA */ -#define AC_SFLD_S7 (0x1 << 7) /* Tx deferred: */ - /* other link traffic */ -#define AC_SFLD_S6 (0x1 << 6) /* Heart Beat: collision */ - /* detect after last tx */ -#define AC_SFLD_S5 (0x1 << 5) /* Tx stopped: */ - /* excessive collisions */ -#define AC_SFLD_MAXCOL (0xF << 0) /* Collision count */ - unsigned short ac_command; /* Command specifier: */ -#define AC_CFLD_EL (0x1 << 15) /* End of command list */ -#define AC_CFLD_S (0x1 << 14) /* Suspend on completion */ -#define AC_CFLD_I (0x1 << 13) /* Interrupt on completion */ -#define AC_CFLD_CMD (0x7 << 0) /* acmd_e */ - unsigned short ac_link; /* Next Action Command */ -}; - -#define acoff(p,f) toff(ach_t, p, f) - -/* - * The Nop Action Command. - */ -typedef struct ac_nop_t ac_nop_t; -struct ac_nop_t -{ - ach_t nop_h; -}; - -/* - * The IA-Setup Action Command. - */ -typedef struct ac_ias_t ac_ias_t; -struct ac_ias_t -{ - ach_t ias_h; - unsigned char ias_addr[ADDR_LEN]; /* The (ethernet) address */ -}; - -/* - * The Configure Action Command. - */ -typedef struct ac_cfg_t ac_cfg_t; -struct ac_cfg_t -{ - ach_t cfg_h; - unsigned char cfg_byte_cnt; /* Size foll data: 4-12 */ -#define AC_CFG_BYTE_CNT(v) (((v) & 0xF) << 0) - unsigned char cfg_fifolim; /* FIFO threshold */ -#define AC_CFG_FIFOLIM(v) (((v) & 0xF) << 0) - unsigned char cfg_byte8; -#define AC_CFG_SAV_BF(v) (((v) & 0x1) << 7) /* Save rxd bad frames */ -#define AC_CFG_SRDY(v) (((v) & 0x1) << 6) /* SRDY/ARDY pin means */ - /* external sync. */ - unsigned char cfg_byte9; -#define AC_CFG_ELPBCK(v) (((v) & 0x1) << 7) /* External loopback */ -#define AC_CFG_ILPBCK(v) (((v) & 0x1) << 6) /* Internal loopback */ -#define AC_CFG_PRELEN(v) (((v) & 0x3) << 4) /* Preamble length */ -#define AC_CFG_PLEN_2 0 /* 2 bytes */ -#define AC_CFG_PLEN_4 1 /* 4 bytes */ -#define AC_CFG_PLEN_8 2 /* 8 bytes */ -#define AC_CFG_PLEN_16 3 /* 16 bytes */ -#define AC_CFG_ALOC(v) (((v) & 0x1) << 3) /* Addr/len data is */ - /* explicit in buffers */ -#define AC_CFG_ADDRLEN(v) (((v) & 0x7) << 0) /* Bytes per address */ - unsigned char cfg_byte10; -#define AC_CFG_BOFMET(v) (((v) & 0x1) << 7) /* Use alternate expo. */ - /* backoff method */ -#define AC_CFG_ACR(v) (((v) & 0x7) << 4) /* Accelerated cont. res. */ -#define AC_CFG_LINPRIO(v) (((v) & 0x7) << 0) /* Linear priority */ - unsigned char cfg_ifs; /* Interframe spacing */ - unsigned char cfg_slotl; /* Slot time (low byte) */ - unsigned char cfg_byte13; -#define AC_CFG_RETRYNUM(v) (((v) & 0xF) << 4) /* Max. collision retry */ -#define AC_CFG_SLTTMHI(v) (((v) & 0x7) << 0) /* Slot time (high bits) */ - unsigned char cfg_byte14; -#define AC_CFG_FLGPAD(v) (((v) & 0x1) << 7) /* Pad with HDLC flags */ -#define AC_CFG_BTSTF(v) (((v) & 0x1) << 6) /* Do HDLC bitstuffing */ -#define AC_CFG_CRC16(v) (((v) & 0x1) << 5) /* 16 bit CCITT CRC */ -#define AC_CFG_NCRC(v) (((v) & 0x1) << 4) /* Insert no CRC */ -#define AC_CFG_TNCRS(v) (((v) & 0x1) << 3) /* Tx even if no carrier */ -#define AC_CFG_MANCH(v) (((v) & 0x1) << 2) /* Manchester coding */ -#define AC_CFG_BCDIS(v) (((v) & 0x1) << 1) /* Disable broadcast */ -#define AC_CFG_PRM(v) (((v) & 0x1) << 0) /* Promiscuous mode */ - unsigned char cfg_byte15; -#define AC_CFG_ICDS(v) (((v) & 0x1) << 7) /* Internal collision */ - /* detect source */ -#define AC_CFG_CDTF(v) (((v) & 0x7) << 4) /* Collision detect */ - /* filter in bit times */ -#define AC_CFG_ICSS(v) (((v) & 0x1) << 3) /* Internal carrier */ - /* sense source */ -#define AC_CFG_CSTF(v) (((v) & 0x7) << 0) /* Carrier sense */ - /* filter in bit times */ - unsigned short cfg_min_frm_len; -#define AC_CFG_MNFRM(v) (((v) & 0xFF) << 0) /* Min. bytes/frame (<= 255) */ -}; - -/* - * The MC-Setup Action Command. - */ -typedef struct ac_mcs_t ac_mcs_t; -struct ac_mcs_t -{ - ach_t mcs_h; - unsigned short mcs_cnt; /* No. of bytes of MC addresses */ -#if 0 - unsigned char mcs_data[ADDR_LEN]; /* The first MC address .. */ - ... -#endif -}; - -#define I82586_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */ - -/* - * The Transmit Action Command. - */ -typedef struct ac_tx_t ac_tx_t; -struct ac_tx_t -{ - ach_t tx_h; - unsigned short tx_tbd_offset; /* Address of list of buffers. */ -#if 0 -Linux packets are passed down with the destination MAC address -and length/type field already prepended to the data, -so we do not need to insert it. Consistent with this -we must also set the AC_CFG_ALOC(..) flag during the -ac_cfg_t action command. - unsigned char tx_addr[ADDR_LEN]; /* The frame dest. address */ - unsigned short tx_length; /* The frame length */ -#endif /* 0 */ -}; - -/* - * The Time Domain Reflectometer Action Command. - */ -typedef struct ac_tdr_t ac_tdr_t; -struct ac_tdr_t -{ - ach_t tdr_h; - unsigned short tdr_result; /* Result. */ -#define AC_TDR_LNK_OK (0x1 << 15) /* No link problem */ -#define AC_TDR_XCVR_PRB (0x1 << 14) /* Txcvr cable problem */ -#define AC_TDR_ET_OPN (0x1 << 13) /* Open on the link */ -#define AC_TDR_ET_SRT (0x1 << 12) /* Short on the link */ -#define AC_TDR_TIME (0x7FF << 0) /* Distance to problem */ - /* site in transmit */ - /* clock cycles */ -}; - -/* - * The Dump Action Command. - */ -typedef struct ac_dmp_t ac_dmp_t; -struct ac_dmp_t -{ - ach_t dmp_h; - unsigned short dmp_offset; /* Result. */ -}; - -/* - * Size of the result of the dump command. - */ -#define DUMPBYTES 170 - -/* - * The Diagnose Action Command. - */ -typedef struct ac_dgn_t ac_dgn_t; -struct ac_dgn_t -{ - ach_t dgn_h; -}; - -/* - * Transmit Buffer Descriptor (TBD). - */ -typedef struct tbd_t tbd_t; -struct tbd_t -{ - unsigned short tbd_status; /* Written by the CPU */ -#define TBD_STATUS_EOF (0x1 << 15) /* This TBD is the */ - /* last for this frame */ -#define TBD_STATUS_ACNT (0x3FFF << 0) /* Actual count of data */ - /* bytes in this buffer */ - unsigned short tbd_next_bd_offset; /* Next in list */ - unsigned short tbd_bufl; /* Buffer address (low) */ - unsigned short tbd_bufh; /* " " (high) */ -}; - -/* - * Receive Buffer Descriptor (RBD). - */ -typedef struct rbd_t rbd_t; -struct rbd_t -{ - unsigned short rbd_status; /* Written by the 82586 */ -#define RBD_STATUS_EOF (0x1 << 15) /* This RBD is the */ - /* last for this frame */ -#define RBD_STATUS_F (0x1 << 14) /* ACNT field is valid */ -#define RBD_STATUS_ACNT (0x3FFF << 0) /* Actual no. of data */ - /* bytes in this buffer */ - unsigned short rbd_next_rbd_offset; /* Next rbd in list */ - unsigned short rbd_bufl; /* Data pointer (low) */ - unsigned short rbd_bufh; /* " " (high) */ - unsigned short rbd_el_size; /* EL+Data buf. size */ -#define RBD_EL (0x1 << 15) /* This BD is the */ - /* last in the list */ -#define RBD_SIZE (0x3FFF << 0) /* No. of bytes the */ - /* buffer can hold */ -}; - -#define rbdoff(p,f) toff(rbd_t, p, f) - -/* - * Frame Descriptor (FD). - */ -typedef struct fd_t fd_t; -struct fd_t -{ - unsigned short fd_status; /* Written by the 82586 */ -#define FD_STATUS_C (0x1 << 15) /* Completed storing frame */ -#define FD_STATUS_B (0x1 << 14) /* FD was consumed by RU */ -#define FD_STATUS_OK (0x1 << 13) /* Frame rxd successfully */ -#define FD_STATUS_S11 (0x1 << 11) /* CRC error */ -#define FD_STATUS_S10 (0x1 << 10) /* Alignment error */ -#define FD_STATUS_S9 (0x1 << 9) /* Ran out of resources */ -#define FD_STATUS_S8 (0x1 << 8) /* Rx DMA overrun */ -#define FD_STATUS_S7 (0x1 << 7) /* Frame too short */ -#define FD_STATUS_S6 (0x1 << 6) /* No EOF flag */ - unsigned short fd_command; /* Command */ -#define FD_COMMAND_EL (0x1 << 15) /* Last FD in list */ -#define FD_COMMAND_S (0x1 << 14) /* Suspend RU after rx */ - unsigned short fd_link_offset; /* Next FD */ - unsigned short fd_rbd_offset; /* First RBD (data) */ - /* Prepared by CPU, */ - /* updated by 82586 */ -#if 0 -I think the rest is unused since we -have set AC_CFG_ALOC(..). However, just -in case, we leave the space. -#endif /* 0 */ - unsigned char fd_dest[ADDR_LEN]; /* Destination address */ - /* Written by 82586 */ - unsigned char fd_src[ADDR_LEN]; /* Source address */ - /* Written by 82586 */ - unsigned short fd_length; /* Frame length or type */ - /* Written by 82586 */ -}; - -#define fdoff(p,f) toff(fd_t, p, f) - -/* - * This software may only be used and distributed - * according to the terms of the GNU General Public License. - * - * For more details, see wavelan.c. - */ diff --git a/drivers/net/wireless/i82593.h b/drivers/net/wireless/i82593.h deleted file mode 100644 index afac5c7a323d..000000000000 --- a/drivers/net/wireless/i82593.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Definitions for Intel 82593 CSMA/CD Core LAN Controller - * The definitions are taken from the 1992 users manual with Intel - * order number 297125-001. - * - * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp - * - * Copyright 1994, Anders Klemets <klemets@it.kth.se> - * - * HISTORY - * i82593.h,v - * Revision 1.4 2005/11/4 09:15:00 baroniunas - * Modified copyright with permission of author as follows: - * - * "If I82539.H is the only file with my copyright statement - * that is included in the Source Forge project, then you have - * my approval to change the copyright statement to be a GPL - * license, in the way you proposed on October 10." - * - * Revision 1.1 1996/07/17 15:23:12 root - * Initial revision - * - * Revision 1.3 1995/04/05 15:13:58 adj - * Initial alpha release - * - * Revision 1.2 1994/06/16 23:57:31 klemets - * Mirrored all the fields in the configuration block. - * - * Revision 1.1 1994/06/02 20:25:34 klemets - * Initial revision - * - * - */ -#ifndef _I82593_H -#define _I82593_H - -/* Intel 82593 CSMA/CD Core LAN Controller */ - -/* Port 0 Command Register definitions */ - -/* Execution operations */ -#define OP0_NOP 0 /* CHNL = 0 */ -#define OP0_SWIT_TO_PORT_1 0 /* CHNL = 1 */ -#define OP0_IA_SETUP 1 -#define OP0_CONFIGURE 2 -#define OP0_MC_SETUP 3 -#define OP0_TRANSMIT 4 -#define OP0_TDR 5 -#define OP0_DUMP 6 -#define OP0_DIAGNOSE 7 -#define OP0_TRANSMIT_NO_CRC 9 -#define OP0_RETRANSMIT 12 -#define OP0_ABORT 13 -/* Reception operations */ -#define OP0_RCV_ENABLE 8 -#define OP0_RCV_DISABLE 10 -#define OP0_STOP_RCV 11 -/* Status pointer control operations */ -#define OP0_FIX_PTR 15 /* CHNL = 1 */ -#define OP0_RLS_PTR 15 /* CHNL = 0 */ -#define OP0_RESET 14 - -#define CR0_CHNL (1 << 4) /* 0=Channel 0, 1=Channel 1 */ -#define CR0_STATUS_0 0x00 -#define CR0_STATUS_1 0x20 -#define CR0_STATUS_2 0x40 -#define CR0_STATUS_3 0x60 -#define CR0_INT_ACK (1 << 7) /* 0=No ack, 1=acknowledge */ - -/* Port 0 Status Register definitions */ - -#define SR0_NO_RESULT 0 /* dummy */ -#define SR0_EVENT_MASK 0x0f -#define SR0_IA_SETUP_DONE 1 -#define SR0_CONFIGURE_DONE 2 -#define SR0_MC_SETUP_DONE 3 -#define SR0_TRANSMIT_DONE 4 -#define SR0_TDR_DONE 5 -#define SR0_DUMP_DONE 6 -#define SR0_DIAGNOSE_PASSED 7 -#define SR0_TRANSMIT_NO_CRC_DONE 9 -#define SR0_RETRANSMIT_DONE 12 -#define SR0_EXECUTION_ABORTED 13 -#define SR0_END_OF_FRAME 8 -#define SR0_RECEPTION_ABORTED 10 -#define SR0_DIAGNOSE_FAILED 15 -#define SR0_STOP_REG_HIT 11 - -#define SR0_CHNL (1 << 4) -#define SR0_EXECUTION (1 << 5) -#define SR0_RECEPTION (1 << 6) -#define SR0_INTERRUPT (1 << 7) -#define SR0_BOTH_RX_TX (SR0_EXECUTION | SR0_RECEPTION) - -#define SR3_EXEC_STATE_MASK 0x03 -#define SR3_EXEC_IDLE 0 -#define SR3_TX_ABORT_IN_PROGRESS 1 -#define SR3_EXEC_ACTIVE 2 -#define SR3_ABORT_IN_PROGRESS 3 -#define SR3_EXEC_CHNL (1 << 2) -#define SR3_STP_ON_NO_RSRC (1 << 3) -#define SR3_RCVING_NO_RSRC (1 << 4) -#define SR3_RCV_STATE_MASK 0x60 -#define SR3_RCV_IDLE 0x00 -#define SR3_RCV_READY 0x20 -#define SR3_RCV_ACTIVE 0x40 -#define SR3_RCV_STOP_IN_PROG 0x60 -#define SR3_RCV_CHNL (1 << 7) - -/* Port 1 Command Register definitions */ - -#define OP1_NOP 0 -#define OP1_SWIT_TO_PORT_0 1 -#define OP1_INT_DISABLE 2 -#define OP1_INT_ENABLE 3 -#define OP1_SET_TS 5 -#define OP1_RST_TS 7 -#define OP1_POWER_DOWN 8 -#define OP1_RESET_RING_MNGMT 11 -#define OP1_RESET 14 -#define OP1_SEL_RST 15 - -#define CR1_STATUS_4 0x00 -#define CR1_STATUS_5 0x20 -#define CR1_STATUS_6 0x40 -#define CR1_STOP_REG_UPDATE (1 << 7) - -/* Receive frame status bits */ - -#define RX_RCLD (1 << 0) -#define RX_IA_MATCH (1 << 1) -#define RX_NO_AD_MATCH (1 << 2) -#define RX_NO_SFD (1 << 3) -#define RX_SRT_FRM (1 << 7) -#define RX_OVRRUN (1 << 8) -#define RX_ALG_ERR (1 << 10) -#define RX_CRC_ERR (1 << 11) -#define RX_LEN_ERR (1 << 12) -#define RX_RCV_OK (1 << 13) -#define RX_TYP_LEN (1 << 15) - -/* Transmit status bits */ - -#define TX_NCOL_MASK 0x0f -#define TX_FRTL (1 << 4) -#define TX_MAX_COL (1 << 5) -#define TX_HRT_BEAT (1 << 6) -#define TX_DEFER (1 << 7) -#define TX_UND_RUN (1 << 8) -#define TX_LOST_CTS (1 << 9) -#define TX_LOST_CRS (1 << 10) -#define TX_LTCOL (1 << 11) -#define TX_OK (1 << 13) -#define TX_COLL (1 << 15) - -struct i82593_conf_block { - u_char fifo_limit : 4, - forgnesi : 1, - fifo_32 : 1, - d6mod : 1, - throttle_enb : 1; - u_char throttle : 6, - cntrxint : 1, - contin : 1; - u_char addr_len : 3, - acloc : 1, - preamb_len : 2, - loopback : 2; - u_char lin_prio : 3, - tbofstop : 1, - exp_prio : 3, - bof_met : 1; - u_char : 4, - ifrm_spc : 4; - u_char : 5, - slottim_low : 3; - u_char slottim_hi : 3, - : 1, - max_retr : 4; - u_char prmisc : 1, - bc_dis : 1, - : 1, - crs_1 : 1, - nocrc_ins : 1, - crc_1632 : 1, - : 1, - crs_cdt : 1; - u_char cs_filter : 3, - crs_src : 1, - cd_filter : 3, - : 1; - u_char : 2, - min_fr_len : 6; - u_char lng_typ : 1, - lng_fld : 1, - rxcrc_xf : 1, - artx : 1, - sarec : 1, - tx_jabber : 1, /* why is this called max_len in the manual? */ - hash_1 : 1, - lbpkpol : 1; - u_char : 6, - fdx : 1, - : 1; - u_char dummy_6 : 6, /* supposed to be ones */ - mult_ia : 1, - dis_bof : 1; - u_char dummy_1 : 1, /* supposed to be one */ - tx_ifs_retrig : 2, - mc_all : 1, - rcv_mon : 2, - frag_acpt : 1, - tstrttrs : 1; - u_char fretx : 1, - runt_eop : 1, - hw_sw_pin : 1, - big_endn : 1, - syncrqs : 1, - sttlen : 1, - tx_eop : 1, - rx_eop : 1; - u_char rbuf_size : 5, - rcvstop : 1, - : 2; -}; - -#define I82593_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */ - -#endif /* _I82593_H */ diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c deleted file mode 100644 index d634b2da3b84..000000000000 --- a/drivers/net/wireless/wavelan.c +++ /dev/null @@ -1,4383 +0,0 @@ -/* - * WaveLAN ISA driver - * - * Jean II - HPLB '96 - * - * Reorganisation and extension of the driver. - * Original copyright follows (also see the end of this file). - * See wavelan.p.h for details. - * - * - * - * AT&T GIS (nee NCR) WaveLAN card: - * An Ethernet-like radio transceiver - * controlled by an Intel 82586 coprocessor. - */ - -#include "wavelan.p.h" /* Private header */ - -/************************* MISC SUBROUTINES **************************/ -/* - * Subroutines which won't fit in one of the following category - * (WaveLAN modem or i82586) - */ - -/*------------------------------------------------------------------*/ -/* - * Translate irq number to PSA irq parameter - */ -static u8 wv_irq_to_psa(int irq) -{ - if (irq < 0 || irq >= ARRAY_SIZE(irqvals)) - return 0; - - return irqvals[irq]; -} - -/*------------------------------------------------------------------*/ -/* - * Translate PSA irq parameter to irq number - */ -static int __init wv_psa_to_irq(u8 irqval) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(irqvals); i++) - if (irqvals[i] == irqval) - return i; - - return -1; -} - -/********************* HOST ADAPTER SUBROUTINES *********************/ -/* - * Useful subroutines to manage the WaveLAN ISA interface - * - * One major difference with the PCMCIA hardware (except the port mapping) - * is that we have to keep the state of the Host Control Register - * because of the interrupt enable & bus size flags. - */ - -/*------------------------------------------------------------------*/ -/* - * Read from card's Host Adaptor Status Register. - */ -static inline u16 hasr_read(unsigned long ioaddr) -{ - return (inw(HASR(ioaddr))); -} /* hasr_read */ - -/*------------------------------------------------------------------*/ -/* - * Write to card's Host Adapter Command Register. - */ -static inline void hacr_write(unsigned long ioaddr, u16 hacr) -{ - outw(hacr, HACR(ioaddr)); -} /* hacr_write */ - -/*------------------------------------------------------------------*/ -/* - * Write to card's Host Adapter Command Register. Include a delay for - * those times when it is needed. - */ -static void hacr_write_slow(unsigned long ioaddr, u16 hacr) -{ - hacr_write(ioaddr, hacr); - /* delay might only be needed sometimes */ - mdelay(1); -} /* hacr_write_slow */ - -/*------------------------------------------------------------------*/ -/* - * Set the channel attention bit. - */ -static inline void set_chan_attn(unsigned long ioaddr, u16 hacr) -{ - hacr_write(ioaddr, hacr | HACR_CA); -} /* set_chan_attn */ - -/*------------------------------------------------------------------*/ -/* - * Reset, and then set host adaptor into default mode. - */ -static inline void wv_hacr_reset(unsigned long ioaddr) -{ - hacr_write_slow(ioaddr, HACR_RESET); - hacr_write(ioaddr, HACR_DEFAULT); -} /* wv_hacr_reset */ - -/*------------------------------------------------------------------*/ -/* - * Set the I/O transfer over the ISA bus to 8-bit mode - */ -static inline void wv_16_off(unsigned long ioaddr, u16 hacr) -{ - hacr &= ~HACR_16BITS; - hacr_write(ioaddr, hacr); -} /* wv_16_off */ - -/*------------------------------------------------------------------*/ -/* - * Set the I/O transfer over the ISA bus to 8-bit mode - */ -static inline void wv_16_on(unsigned long ioaddr, u16 hacr) -{ - hacr |= HACR_16BITS; - hacr_write(ioaddr, hacr); -} /* wv_16_on */ - -/*------------------------------------------------------------------*/ -/* - * Disable interrupts on the WaveLAN hardware. - * (called by wv_82586_stop()) - */ -static inline void wv_ints_off(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - - lp->hacr &= ~HACR_INTRON; - hacr_write(ioaddr, lp->hacr); -} /* wv_ints_off */ - -/*------------------------------------------------------------------*/ -/* - * Enable interrupts on the WaveLAN hardware. - * (called by wv_hw_reset()) - */ -static inline void wv_ints_on(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - - lp->hacr |= HACR_INTRON; - hacr_write(ioaddr, lp->hacr); -} /* wv_ints_on */ - -/******************* MODEM MANAGEMENT SUBROUTINES *******************/ -/* - * Useful subroutines to manage the modem of the WaveLAN - */ - -/*------------------------------------------------------------------*/ -/* - * Read the Parameter Storage Area from the WaveLAN card's memory - */ -/* - * Read bytes from the PSA. - */ -static void psa_read(unsigned long ioaddr, u16 hacr, int o, /* offset in PSA */ - u8 * b, /* buffer to fill */ - int n) -{ /* size to read */ - wv_16_off(ioaddr, hacr); - - while (n-- > 0) { - outw(o, PIOR2(ioaddr)); - o++; - *b++ = inb(PIOP2(ioaddr)); - } - - wv_16_on(ioaddr, hacr); -} /* psa_read */ - -/*------------------------------------------------------------------*/ -/* - * Write the Parameter Storage Area to the WaveLAN card's memory. - */ -static void psa_write(unsigned long ioaddr, u16 hacr, int o, /* Offset in PSA */ - u8 * b, /* Buffer in memory */ - int n) -{ /* Length of buffer */ - int count = 0; - - wv_16_off(ioaddr, hacr); - - while (n-- > 0) { - outw(o, PIOR2(ioaddr)); - o++; - - outb(*b, PIOP2(ioaddr)); - b++; - - /* Wait for the memory to finish its write cycle */ - count = 0; - while ((count++ < 100) && - (hasr_read(ioaddr) & HASR_PSA_BUSY)) mdelay(1); - } - - wv_16_on(ioaddr, hacr); -} /* psa_write */ - -#ifdef SET_PSA_CRC -/*------------------------------------------------------------------*/ -/* - * Calculate the PSA CRC - * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code - * NOTE: By specifying a length including the CRC position the - * returned value should be zero. (i.e. a correct checksum in the PSA) - * - * The Windows drivers don't use the CRC, but the AP and the PtP tool - * depend on it. - */ -static u16 psa_crc(u8 * psa, /* The PSA */ - int size) -{ /* Number of short for CRC */ - int byte_cnt; /* Loop on the PSA */ - u16 crc_bytes = 0; /* Data in the PSA */ - int bit_cnt; /* Loop on the bits of the short */ - - for (byte_cnt = 0; byte_cnt < size; byte_cnt++) { - crc_bytes ^= psa[byte_cnt]; /* Its an xor */ - - for (bit_cnt = 1; bit_cnt < 9; bit_cnt++) { - if (crc_bytes & 0x0001) - crc_bytes = (crc_bytes >> 1) ^ 0xA001; - else - crc_bytes >>= 1; - } - } - - return crc_bytes; -} /* psa_crc */ -#endif /* SET_PSA_CRC */ - -/*------------------------------------------------------------------*/ -/* - * update the checksum field in the Wavelan's PSA - */ -static void update_psa_checksum(struct net_device * dev, unsigned long ioaddr, u16 hacr) -{ -#ifdef SET_PSA_CRC - psa_t psa; - u16 crc; - - /* read the parameter storage area */ - psa_read(ioaddr, hacr, 0, (unsigned char *) &psa, sizeof(psa)); - - /* update the checksum */ - crc = psa_crc((unsigned char *) &psa, - sizeof(psa) - sizeof(psa.psa_crc[0]) - - sizeof(psa.psa_crc[1]) - - sizeof(psa.psa_crc_status)); - - psa.psa_crc[0] = crc & 0xFF; - psa.psa_crc[1] = (crc & 0xFF00) >> 8; - - /* Write it ! */ - psa_write(ioaddr, hacr, (char *) &psa.psa_crc - (char *) &psa, - (unsigned char *) &psa.psa_crc, 2); - -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n", - dev->name, psa.psa_crc[0], psa.psa_crc[1]); - - /* Check again (luxury !) */ - crc = psa_crc((unsigned char *) &psa, - sizeof(psa) - sizeof(psa.psa_crc_status)); - - if (crc != 0) - printk(KERN_WARNING - "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", - dev->name); -#endif /* DEBUG_IOCTL_INFO */ -#endif /* SET_PSA_CRC */ -} /* update_psa_checksum */ - -/*------------------------------------------------------------------*/ -/* - * Write 1 byte to the MMC. - */ -static void mmc_out(unsigned long ioaddr, u16 o, u8 d) -{ - int count = 0; - - /* Wait for MMC to go idle */ - while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY)) - udelay(10); - - outw((u16) (((u16) d << 8) | (o << 1) | 1), MMCR(ioaddr)); -} - -/*------------------------------------------------------------------*/ -/* - * Routine to write bytes to the Modem Management Controller. - * We start at the end because it is the way it should be! - */ -static void mmc_write(unsigned long ioaddr, u8 o, u8 * b, int n) -{ - o += n; - b += n; - - while (n-- > 0) - mmc_out(ioaddr, --o, *(--b)); -} /* mmc_write */ - -/*------------------------------------------------------------------*/ -/* - * Read a byte from the MMC. - * Optimised version for 1 byte, avoid using memory. - */ -static u8 mmc_in(unsigned long ioaddr, u16 o) -{ - int count = 0; - - while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY)) - udelay(10); - outw(o << 1, MMCR(ioaddr)); - - while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY)) - udelay(10); - return (u8) (inw(MMCR(ioaddr)) >> 8); -} - -/*------------------------------------------------------------------*/ -/* - * Routine to read bytes from the Modem Management Controller. - * The implementation is complicated by a lack of address lines, - * which prevents decoding of the low-order bit. - * (code has just been moved in the above function) - * We start at the end because it is the way it should be! - */ -static inline void mmc_read(unsigned long ioaddr, u8 o, u8 * b, int n) -{ - o += n; - b += n; - - while (n-- > 0) - *(--b) = mmc_in(ioaddr, --o); -} /* mmc_read */ - -/*------------------------------------------------------------------*/ -/* - * Get the type of encryption available. - */ -static inline int mmc_encr(unsigned long ioaddr) -{ /* I/O port of the card */ - int temp; - - temp = mmc_in(ioaddr, mmroff(0, mmr_des_avail)); - if ((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES)) - return 0; - else - return temp; -} - -/*------------------------------------------------------------------*/ -/* - * Wait for the frequency EEPROM to complete a command. - * I hope this one will be optimally inlined. - */ -static inline void fee_wait(unsigned long ioaddr, /* I/O port of the card */ - int delay, /* Base delay to wait for */ - int number) -{ /* Number of time to wait */ - int count = 0; /* Wait only a limited time */ - - while ((count++ < number) && - (mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & - MMR_FEE_STATUS_BUSY)) udelay(delay); -} - -/*------------------------------------------------------------------*/ -/* - * Read bytes from the Frequency EEPROM (frequency select cards). - */ -static void fee_read(unsigned long ioaddr, /* I/O port of the card */ - u16 o, /* destination offset */ - u16 * b, /* data buffer */ - int n) -{ /* number of registers */ - b += n; /* Position at the end of the area */ - - /* Write the address */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n - 1); - - /* Loop on all buffer */ - while (n-- > 0) { - /* Write the read command */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), - MMW_FEE_CTRL_READ); - - /* Wait until EEPROM is ready (should be quick). */ - fee_wait(ioaddr, 10, 100); - - /* Read the value. */ - *--b = ((mmc_in(ioaddr, mmroff(0, mmr_fee_data_h)) << 8) | - mmc_in(ioaddr, mmroff(0, mmr_fee_data_l))); - } -} - - -/*------------------------------------------------------------------*/ -/* - * Write bytes from the Frequency EEPROM (frequency select cards). - * This is a bit complicated, because the frequency EEPROM has to - * be unprotected and the write enabled. - * Jean II - */ -static void fee_write(unsigned long ioaddr, /* I/O port of the card */ - u16 o, /* destination offset */ - u16 * b, /* data buffer */ - int n) -{ /* number of registers */ - b += n; /* Position at the end of the area. */ - -#ifdef EEPROM_IS_PROTECTED /* disabled */ -#ifdef DOESNT_SEEM_TO_WORK /* disabled */ - /* Ask to read the protected register */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD); - - fee_wait(ioaddr, 10, 100); - - /* Read the protected register. */ - printk("Protected 2: %02X-%02X\n", - mmc_in(ioaddr, mmroff(0, mmr_fee_data_h)), - mmc_in(ioaddr, mmroff(0, mmr_fee_data_l))); -#endif /* DOESNT_SEEM_TO_WORK */ - - /* Enable protected register. */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN); - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN); - - fee_wait(ioaddr, 10, 100); - - /* Unprotect area. */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n); - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE); -#ifdef DOESNT_SEEM_TO_WORK /* disabled */ - /* or use: */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR); -#endif /* DOESNT_SEEM_TO_WORK */ - - fee_wait(ioaddr, 10, 100); -#endif /* EEPROM_IS_PROTECTED */ - - /* Write enable. */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN); - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN); - - fee_wait(ioaddr, 10, 100); - - /* Write the EEPROM address. */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n - 1); - - /* Loop on all buffer */ - while (n-- > 0) { - /* Write the value. */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_data_h), (*--b) >> 8); - mmc_out(ioaddr, mmwoff(0, mmw_fee_data_l), *b & 0xFF); - - /* Write the write command. */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), - MMW_FEE_CTRL_WRITE); - - /* WaveLAN documentation says to wait at least 10 ms for EEBUSY = 0 */ - mdelay(10); - fee_wait(ioaddr, 10, 100); - } - - /* Write disable. */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS); - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS); - - fee_wait(ioaddr, 10, 100); - -#ifdef EEPROM_IS_PROTECTED /* disabled */ - /* Reprotect EEPROM. */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x00); - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE); - - fee_wait(ioaddr, 10, 100); -#endif /* EEPROM_IS_PROTECTED */ -} - -/************************ I82586 SUBROUTINES *************************/ -/* - * Useful subroutines to manage the Ethernet controller - */ - -/*------------------------------------------------------------------*/ -/* - * Read bytes from the on-board RAM. - * Why does inlining this function make it fail? - */ -static /*inline */ void obram_read(unsigned long ioaddr, - u16 o, u8 * b, int n) -{ - outw(o, PIOR1(ioaddr)); - insw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1); -} - -/*------------------------------------------------------------------*/ -/* - * Write bytes to the on-board RAM. - */ -static inline void obram_write(unsigned long ioaddr, u16 o, u8 * b, int n) -{ - outw(o, PIOR1(ioaddr)); - outsw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1); -} - -/*------------------------------------------------------------------*/ -/* - * Acknowledge the reading of the status issued by the i82586. - */ -static void wv_ack(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - u16 scb_cs; - int i; - - obram_read(ioaddr, scboff(OFFSET_SCB, scb_status), - (unsigned char *) &scb_cs, sizeof(scb_cs)); - scb_cs &= SCB_ST_INT; - - if (scb_cs == 0) - return; - - obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), - (unsigned char *) &scb_cs, sizeof(scb_cs)); - - set_chan_attn(ioaddr, lp->hacr); - - for (i = 1000; i > 0; i--) { - obram_read(ioaddr, scboff(OFFSET_SCB, scb_command), - (unsigned char *) &scb_cs, sizeof(scb_cs)); - if (scb_cs == 0) - break; - - udelay(10); - } - udelay(100); - -#ifdef DEBUG_CONFIG_ERROR - if (i <= 0) - printk(KERN_INFO - "%s: wv_ack(): board not accepting command.\n", - dev->name); -#endif -} - -/*------------------------------------------------------------------*/ -/* - * Set channel attention bit and busy wait until command has - * completed, then acknowledge completion of the command. - */ -static int wv_synchronous_cmd(struct net_device * dev, const char *str) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - u16 scb_cmd; - ach_t cb; - int i; - - scb_cmd = SCB_CMD_CUC & SCB_CMD_CUC_GO; - obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), - (unsigned char *) &scb_cmd, sizeof(scb_cmd)); - - set_chan_attn(ioaddr, lp->hacr); - - for (i = 1000; i > 0; i--) { - obram_read(ioaddr, OFFSET_CU, (unsigned char *) &cb, - sizeof(cb)); - if (cb.ac_status & AC_SFLD_C) - break; - - udelay(10); - } - udelay(100); - - if (i <= 0 || !(cb.ac_status & AC_SFLD_OK)) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_INFO "%s: %s failed; status = 0x%x\n", - dev->name, str, cb.ac_status); -#endif -#ifdef DEBUG_I82586_SHOW - wv_scb_show(ioaddr); -#endif - return -1; - } - - /* Ack the status */ - wv_ack(dev); - - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Configuration commands completion interrupt. - * Check if done, and if OK. - */ -static int -wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp) -{ - unsigned short mcs_addr; - unsigned short status; - int ret; - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: ->wv_config_complete()\n", dev->name); -#endif - - mcs_addr = lp->tx_first_in_use + sizeof(ac_tx_t) + sizeof(ac_nop_t) - + sizeof(tbd_t) + sizeof(ac_cfg_t) + sizeof(ac_ias_t); - - /* Read the status of the last command (set mc list). */ - obram_read(ioaddr, acoff(mcs_addr, ac_status), - (unsigned char *) &status, sizeof(status)); - - /* If not completed -> exit */ - if ((status & AC_SFLD_C) == 0) - ret = 0; /* Not ready to be scrapped */ - else { -#ifdef DEBUG_CONFIG_ERROR - unsigned short cfg_addr; - unsigned short ias_addr; - - /* Check mc_config command */ - if ((status & AC_SFLD_OK) != AC_SFLD_OK) - printk(KERN_INFO - "%s: wv_config_complete(): set_multicast_address failed; status = 0x%x\n", - dev->name, status); - - /* check ia-config command */ - ias_addr = mcs_addr - sizeof(ac_ias_t); - obram_read(ioaddr, acoff(ias_addr, ac_status), - (unsigned char *) &status, sizeof(status)); - if ((status & AC_SFLD_OK) != AC_SFLD_OK) - printk(KERN_INFO - "%s: wv_config_complete(): set_MAC_address failed; status = 0x%x\n", - dev->name, status); - - /* Check config command. */ - cfg_addr = ias_addr - sizeof(ac_cfg_t); - obram_read(ioaddr, acoff(cfg_addr, ac_status), - (unsigned char *) &status, sizeof(status)); - if ((status & AC_SFLD_OK) != AC_SFLD_OK) - printk(KERN_INFO - "%s: wv_config_complete(): configure failed; status = 0x%x\n", - dev->name, status); -#endif /* DEBUG_CONFIG_ERROR */ - - ret = 1; /* Ready to be scrapped */ - } - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: <-wv_config_complete() - %d\n", dev->name, - ret); -#endif - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Command completion interrupt. - * Reclaim as many freed tx buffers as we can. - * (called in wavelan_interrupt()). - * Note : the spinlock is already grabbed for us. - */ -static int wv_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp) -{ - int nreaped = 0; - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: ->wv_complete()\n", dev->name); -#endif - - /* Loop on all the transmit buffers */ - while (lp->tx_first_in_use != I82586NULL) { - unsigned short tx_status; - - /* Read the first transmit buffer */ - obram_read(ioaddr, acoff(lp->tx_first_in_use, ac_status), - (unsigned char *) &tx_status, - sizeof(tx_status)); - - /* If not completed -> exit */ - if ((tx_status & AC_SFLD_C) == 0) - break; - - /* Hack for reconfiguration */ - if (tx_status == 0xFFFF) - if (!wv_config_complete(dev, ioaddr, lp)) - break; /* Not completed */ - - /* We now remove this buffer */ - nreaped++; - --lp->tx_n_in_use; - -/* -if (lp->tx_n_in_use > 0) - printk("%c", "0123456789abcdefghijk"[lp->tx_n_in_use]); -*/ - - /* Was it the last one? */ - if (lp->tx_n_in_use <= 0) - lp->tx_first_in_use = I82586NULL; - else { - /* Next one in the chain */ - lp->tx_first_in_use += TXBLOCKZ; - if (lp->tx_first_in_use >= - OFFSET_CU + - NTXBLOCKS * TXBLOCKZ) lp->tx_first_in_use -= - NTXBLOCKS * TXBLOCKZ; - } - - /* Hack for reconfiguration */ - if (tx_status == 0xFFFF) - continue; - - /* Now, check status of the finished command */ - if (tx_status & AC_SFLD_OK) { - int ncollisions; - - dev->stats.tx_packets++; - ncollisions = tx_status & AC_SFLD_MAXCOL; - dev->stats.collisions += ncollisions; -#ifdef DEBUG_TX_INFO - if (ncollisions > 0) - printk(KERN_DEBUG - "%s: wv_complete(): tx completed after %d collisions.\n", - dev->name, ncollisions); -#endif - } else { - dev->stats.tx_errors++; - if (tx_status & AC_SFLD_S10) { - dev->stats.tx_carrier_errors++; -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG - "%s: wv_complete(): tx error: no CS.\n", - dev->name); -#endif - } - if (tx_status & AC_SFLD_S9) { - dev->stats.tx_carrier_errors++; -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG - "%s: wv_complete(): tx error: lost CTS.\n", - dev->name); -#endif - } - if (tx_status & AC_SFLD_S8) { - dev->stats.tx_fifo_errors++; -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG - "%s: wv_complete(): tx error: slow DMA.\n", - dev->name); -#endif - } - if (tx_status & AC_SFLD_S6) { - dev->stats.tx_heartbeat_errors++; -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG - "%s: wv_complete(): tx error: heart beat.\n", - dev->name); -#endif - } - if (tx_status & AC_SFLD_S5) { - dev->stats.tx_aborted_errors++; -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG - "%s: wv_complete(): tx error: too many collisions.\n", - dev->name); -#endif - } - } - -#ifdef DEBUG_TX_INFO - printk(KERN_DEBUG - "%s: wv_complete(): tx completed, tx_status 0x%04x\n", - dev->name, tx_status); -#endif - } - -#ifdef DEBUG_INTERRUPT_INFO - if (nreaped > 1) - printk(KERN_DEBUG "%s: wv_complete(): reaped %d\n", - dev->name, nreaped); -#endif - - /* - * Inform upper layers. - */ - if (lp->tx_n_in_use < NTXBLOCKS - 1) { - netif_wake_queue(dev); - } -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: <-wv_complete()\n", dev->name); -#endif - return nreaped; -} - -/*------------------------------------------------------------------*/ -/* - * Reconfigure the i82586, or at least ask for it. - * Because wv_82586_config uses a transmission buffer, we must do it - * when we are sure that there is one left, so we do it now - * or in wavelan_packet_xmit() (I can't find any better place, - * wavelan_interrupt is not an option), so you may experience - * delays sometimes. - */ -static void wv_82586_reconfig(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long flags; - - /* Arm the flag, will be cleard in wv_82586_config() */ - lp->reconfig_82586 = 1; - - /* Check if we can do it now ! */ - if((netif_running(dev)) && !(netif_queue_stopped(dev))) { - spin_lock_irqsave(&lp->spinlock, flags); - /* May fail */ - wv_82586_config(dev); - spin_unlock_irqrestore(&lp->spinlock, flags); - } - else { -#ifdef DEBUG_CONFIG_INFO - printk(KERN_DEBUG - "%s: wv_82586_reconfig(): delayed (state = %lX)\n", - dev->name, dev->state); -#endif - } -} - -/********************* DEBUG & INFO SUBROUTINES *********************/ -/* - * This routine is used in the code to show information for debugging. - * Most of the time, it dumps the contents of hardware structures. - */ - -#ifdef DEBUG_PSA_SHOW -/*------------------------------------------------------------------*/ -/* - * Print the formatted contents of the Parameter Storage Area. - */ -static void wv_psa_show(psa_t * p) -{ - printk(KERN_DEBUG "##### WaveLAN PSA contents: #####\n"); - printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n", - p->psa_io_base_addr_1, - p->psa_io_base_addr_2, - p->psa_io_base_addr_3, p->psa_io_base_addr_4); - printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n", - p->psa_rem_boot_addr_1, - p->psa_rem_boot_addr_2, p->psa_rem_boot_addr_3); - printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params); - printk("psa_int_req_no: %d\n", p->psa_int_req_no); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "psa_unused0[]: %pM\n", p->psa_unused0); -#endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "psa_univ_mac_addr[]: %pM\n", p->psa_univ_mac_addr); - printk(KERN_DEBUG "psa_local_mac_addr[]: %pM\n", p->psa_local_mac_addr); - printk(KERN_DEBUG "psa_univ_local_sel: %d, ", - p->psa_univ_local_sel); - printk("psa_comp_number: %d, ", p->psa_comp_number); - printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set); - printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ", - p->psa_feature_select); - printk("psa_subband/decay_update_prm: %d\n", p->psa_subband); - printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr); - printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay); - printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], - p->psa_nwid[1]); - printk("psa_nwid_select: %d\n", p->psa_nwid_select); - printk(KERN_DEBUG "psa_encryption_select: %d, ", - p->psa_encryption_select); - printk - ("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - p->psa_encryption_key[0], p->psa_encryption_key[1], - p->psa_encryption_key[2], p->psa_encryption_key[3], - p->psa_encryption_key[4], p->psa_encryption_key[5], - p->psa_encryption_key[6], p->psa_encryption_key[7]); - printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width); - printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ", - p->psa_call_code[0]); - printk - ("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", - p->psa_call_code[0], p->psa_call_code[1], p->psa_call_code[2], - p->psa_call_code[3], p->psa_call_code[4], p->psa_call_code[5], - p->psa_call_code[6], p->psa_call_code[7]); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n", - p->psa_reserved[0], - p->psa_reserved[1]); -#endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status); - printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]); - printk("psa_crc_status: 0x%02x\n", p->psa_crc_status); -} /* wv_psa_show */ -#endif /* DEBUG_PSA_SHOW */ - -#ifdef DEBUG_MMC_SHOW -/*------------------------------------------------------------------*/ -/* - * Print the formatted status of the Modem Management Controller. - * This function needs to be completed. - */ -static void wv_mmc_show(struct net_device * dev) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); - mmr_t m; - - /* Basic check */ - if (hasr_read(ioaddr) & HASR_NO_CLK) { - printk(KERN_WARNING - "%s: wv_mmc_show: modem not connected\n", - dev->name); - return; - } - - /* Read the mmc */ - mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1); - mmc_read(ioaddr, 0, (u8 *) & m, sizeof(m)); - mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0); - - /* Don't forget to update statistics */ - lp->wstats.discard.nwid += - (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; - - printk(KERN_DEBUG "##### WaveLAN modem status registers: #####\n"); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG - "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", - m.mmr_unused0[0], m.mmr_unused0[1], m.mmr_unused0[2], - m.mmr_unused0[3], m.mmr_unused0[4], m.mmr_unused0[5], - m.mmr_unused0[6], m.mmr_unused0[7]); -#endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n", - m.mmr_des_avail, m.mmr_des_status); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n", - m.mmr_unused1[0], - m.mmr_unused1[1], - m.mmr_unused1[2], m.mmr_unused1[3], m.mmr_unused1[4]); -#endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n", - m.mmr_dce_status, - (m. - mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? - "energy detected," : "", - (m. - mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ? - "loop test indicated," : "", - (m. - mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? - "transmitter on," : "", - (m. - mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ? - "jabber timer expired," : ""); - printk(KERN_DEBUG "Dsp ID: %02X\n", m.mmr_dsp_id); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n", - m.mmr_unused2[0], m.mmr_unused2[1]); -#endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n", - (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l, - (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l); - printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n", - m.mmr_thr_pre_set & MMR_THR_PRE_SET, - (m. - mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : - "below"); - printk(KERN_DEBUG "signal_lvl: %d [%s], ", - m.mmr_signal_lvl & MMR_SIGNAL_LVL, - (m. - mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : - "no new msg"); - printk("silence_lvl: %d [%s], ", - m.mmr_silence_lvl & MMR_SILENCE_LVL, - (m. - mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : - "no new update"); - printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL, - (m. - mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : - "Antenna 0"); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l); -#endif /* DEBUG_SHOW_UNUSED */ -} /* wv_mmc_show */ -#endif /* DEBUG_MMC_SHOW */ - -#ifdef DEBUG_I82586_SHOW -/*------------------------------------------------------------------*/ -/* - * Print the last block of the i82586 memory. - */ -static void wv_scb_show(unsigned long ioaddr) -{ - scb_t scb; - - obram_read(ioaddr, OFFSET_SCB, (unsigned char *) &scb, - sizeof(scb)); - - printk(KERN_DEBUG "##### WaveLAN system control block: #####\n"); - - printk(KERN_DEBUG "status: "); - printk("stat 0x%x[%s%s%s%s] ", - (scb. - scb_status & (SCB_ST_CX | SCB_ST_FR | SCB_ST_CNA | - SCB_ST_RNR)) >> 12, - (scb. - scb_status & SCB_ST_CX) ? "command completion interrupt," : - "", (scb.scb_status & SCB_ST_FR) ? "frame received," : "", - (scb. - scb_status & SCB_ST_CNA) ? "command unit not active," : "", - (scb. - scb_status & SCB_ST_RNR) ? "receiving unit not ready," : - ""); - printk("cus 0x%x[%s%s%s] ", (scb.scb_status & SCB_ST_CUS) >> 8, - ((scb.scb_status & SCB_ST_CUS) == - SCB_ST_CUS_IDLE) ? "idle" : "", - ((scb.scb_status & SCB_ST_CUS) == - SCB_ST_CUS_SUSP) ? "suspended" : "", - ((scb.scb_status & SCB_ST_CUS) == - SCB_ST_CUS_ACTV) ? "active" : ""); - printk("rus 0x%x[%s%s%s%s]\n", (scb.scb_status & SCB_ST_RUS) >> 4, - ((scb.scb_status & SCB_ST_RUS) == - SCB_ST_RUS_IDLE) ? "idle" : "", - ((scb.scb_status & SCB_ST_RUS) == - SCB_ST_RUS_SUSP) ? "suspended" : "", - ((scb.scb_status & SCB_ST_RUS) == - SCB_ST_RUS_NRES) ? "no resources" : "", - ((scb.scb_status & SCB_ST_RUS) == - SCB_ST_RUS_RDY) ? "ready" : ""); - - printk(KERN_DEBUG "command: "); - printk("ack 0x%x[%s%s%s%s] ", - (scb. - scb_command & (SCB_CMD_ACK_CX | SCB_CMD_ACK_FR | - SCB_CMD_ACK_CNA | SCB_CMD_ACK_RNR)) >> 12, - (scb. - scb_command & SCB_CMD_ACK_CX) ? "ack cmd completion," : "", - (scb. - scb_command & SCB_CMD_ACK_FR) ? "ack frame received," : "", - (scb. - scb_command & SCB_CMD_ACK_CNA) ? "ack CU not active," : "", - (scb. - scb_command & SCB_CMD_ACK_RNR) ? "ack RU not ready," : ""); - printk("cuc 0x%x[%s%s%s%s%s] ", - (scb.scb_command & SCB_CMD_CUC) >> 8, - ((scb.scb_command & SCB_CMD_CUC) == - SCB_CMD_CUC_NOP) ? "nop" : "", - ((scb.scb_command & SCB_CMD_CUC) == - SCB_CMD_CUC_GO) ? "start cbl_offset" : "", - ((scb.scb_command & SCB_CMD_CUC) == - SCB_CMD_CUC_RES) ? "resume execution" : "", - ((scb.scb_command & SCB_CMD_CUC) == - SCB_CMD_CUC_SUS) ? "suspend execution" : "", - ((scb.scb_command & SCB_CMD_CUC) == - SCB_CMD_CUC_ABT) ? "abort execution" : ""); - printk("ruc 0x%x[%s%s%s%s%s]\n", - (scb.scb_command & SCB_CMD_RUC) >> 4, - ((scb.scb_command & SCB_CMD_RUC) == - SCB_CMD_RUC_NOP) ? "nop" : "", - ((scb.scb_command & SCB_CMD_RUC) == - SCB_CMD_RUC_GO) ? "start rfa_offset" : "", - ((scb.scb_command & SCB_CMD_RUC) == - SCB_CMD_RUC_RES) ? "resume reception" : "", - ((scb.scb_command & SCB_CMD_RUC) == - SCB_CMD_RUC_SUS) ? "suspend reception" : "", - ((scb.scb_command & SCB_CMD_RUC) == - SCB_CMD_RUC_ABT) ? "abort reception" : ""); - - printk(KERN_DEBUG "cbl_offset 0x%x ", scb.scb_cbl_offset); - printk("rfa_offset 0x%x\n", scb.scb_rfa_offset); - - printk(KERN_DEBUG "crcerrs %d ", scb.scb_crcerrs); - printk("alnerrs %d ", scb.scb_alnerrs); - printk("rscerrs %d ", scb.scb_rscerrs); - printk("ovrnerrs %d\n", scb.scb_ovrnerrs); -} - -/*------------------------------------------------------------------*/ -/* - * Print the formatted status of the i82586's receive unit. - */ -static void wv_ru_show(struct net_device * dev) -{ - printk(KERN_DEBUG - "##### WaveLAN i82586 receiver unit status: #####\n"); - printk(KERN_DEBUG "ru:"); - /* - * Not implemented yet - */ - printk("\n"); -} /* wv_ru_show */ - -/*------------------------------------------------------------------*/ -/* - * Display info about one control block of the i82586 memory. - */ -static void wv_cu_show_one(struct net_device * dev, net_local * lp, int i, u16 p) -{ - unsigned long ioaddr; - ac_tx_t actx; - - ioaddr = dev->base_addr; - - printk("%d: 0x%x:", i, p); - - obram_read(ioaddr, p, (unsigned char *) &actx, sizeof(actx)); - printk(" status=0x%x,", actx.tx_h.ac_status); - printk(" command=0x%x,", actx.tx_h.ac_command); - - /* - { - tbd_t tbd; - - obram_read(ioaddr, actx.tx_tbd_offset, (unsigned char *)&tbd, sizeof(tbd)); - printk(" tbd_status=0x%x,", tbd.tbd_status); - } - */ - - printk("|"); -} - -/*------------------------------------------------------------------*/ -/* - * Print status of the command unit of the i82586. - */ -static void wv_cu_show(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned int i; - u16 p; - - printk(KERN_DEBUG - "##### WaveLAN i82586 command unit status: #####\n"); - - printk(KERN_DEBUG); - for (i = 0, p = lp->tx_first_in_use; i < NTXBLOCKS; i++) { - wv_cu_show_one(dev, lp, i, p); - - p += TXBLOCKZ; - if (p >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ) - p -= NTXBLOCKS * TXBLOCKZ; - } - printk("\n"); -} -#endif /* DEBUG_I82586_SHOW */ - -#ifdef DEBUG_DEVICE_SHOW -/*------------------------------------------------------------------*/ -/* - * Print the formatted status of the WaveLAN PCMCIA device driver. - */ -static void wv_dev_show(struct net_device * dev) -{ - printk(KERN_DEBUG "dev:"); - printk(" state=%lX,", dev->state); - printk(" trans_start=%ld,", dev->trans_start); - printk(" flags=0x%x,", dev->flags); - printk("\n"); -} /* wv_dev_show */ - -/*------------------------------------------------------------------*/ -/* - * Print the formatted status of the WaveLAN PCMCIA device driver's - * private information. - */ -static void wv_local_show(struct net_device * dev) -{ - net_local *lp; - - lp = netdev_priv(dev); - - printk(KERN_DEBUG "local:"); - printk(" tx_n_in_use=%d,", lp->tx_n_in_use); - printk(" hacr=0x%x,", lp->hacr); - printk(" rx_head=0x%x,", lp->rx_head); - printk(" rx_last=0x%x,", lp->rx_last); - printk(" tx_first_free=0x%x,", lp->tx_first_free); - printk(" tx_first_in_use=0x%x,", lp->tx_first_in_use); - printk("\n"); -} /* wv_local_show */ -#endif /* DEBUG_DEVICE_SHOW */ - -#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) -/*------------------------------------------------------------------*/ -/* - * Dump packet header (and content if necessary) on the screen - */ -static inline void wv_packet_info(u8 * p, /* Packet to dump */ - int length, /* Length of the packet */ - char *msg1, /* Name of the device */ - char *msg2) -{ /* Name of the function */ - int i; - int maxi; - - printk(KERN_DEBUG - "%s: %s(): dest %pM, length %d\n", - msg1, msg2, p, length); - printk(KERN_DEBUG - "%s: %s(): src %pM, type 0x%02X%02X\n", - msg1, msg2, &p[6], p[12], p[13]); - -#ifdef DEBUG_PACKET_DUMP - - printk(KERN_DEBUG "data=\""); - - if ((maxi = length) > DEBUG_PACKET_DUMP) - maxi = DEBUG_PACKET_DUMP; - for (i = 14; i < maxi; i++) - if (p[i] >= ' ' && p[i] <= '~') - printk(" %c", p[i]); - else - printk("%02X", p[i]); - if (maxi < length) - printk(".."); - printk("\"\n"); - printk(KERN_DEBUG "\n"); -#endif /* DEBUG_PACKET_DUMP */ -} -#endif /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */ - -/*------------------------------------------------------------------*/ -/* - * This is the information which is displayed by the driver at startup. - * There are lots of flags for configuring it to your liking. - */ -static void wv_init_info(struct net_device * dev) -{ - short ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); - psa_t psa; - - /* Read the parameter storage area */ - psa_read(ioaddr, lp->hacr, 0, (unsigned char *) &psa, sizeof(psa)); - -#ifdef DEBUG_PSA_SHOW - wv_psa_show(&psa); -#endif -#ifdef DEBUG_MMC_SHOW - wv_mmc_show(dev); -#endif -#ifdef DEBUG_I82586_SHOW - wv_cu_show(dev); -#endif - -#ifdef DEBUG_BASIC_SHOW - /* Now, let's go for the basic stuff. */ - printk(KERN_NOTICE "%s: WaveLAN at %#x, %pM, IRQ %d", - dev->name, ioaddr, dev->dev_addr, dev->irq); - - /* Print current network ID. */ - if (psa.psa_nwid_select) - printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], - psa.psa_nwid[1]); - else - printk(", nwid off"); - - /* If 2.00 card */ - if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & - (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { - unsigned short freq; - - /* Ask the EEPROM to read the frequency from the first area. */ - fee_read(ioaddr, 0x00, &freq, 1); - - /* Print frequency */ - printk(", 2.00, %ld", (freq >> 6) + 2400L); - - /* Hack! */ - if (freq & 0x20) - printk(".5"); - } else { - printk(", PC"); - switch (psa.psa_comp_number) { - case PSA_COMP_PC_AT_915: - case PSA_COMP_PC_AT_2400: - printk("-AT"); - break; - case PSA_COMP_PC_MC_915: - case PSA_COMP_PC_MC_2400: - printk("-MC"); - break; - case PSA_COMP_PCMCIA_915: - printk("MCIA"); - break; - default: - printk("?"); - } - printk(", "); - switch (psa.psa_subband) { - case PSA_SUBBAND_915: - printk("915"); - break; - case PSA_SUBBAND_2425: - printk("2425"); - break; - case PSA_SUBBAND_2460: - printk("2460"); - break; - case PSA_SUBBAND_2484: - printk("2484"); - break; - case PSA_SUBBAND_2430_5: - printk("2430.5"); - break; - default: - printk("?"); - } - } - - printk(" MHz\n"); -#endif /* DEBUG_BASIC_SHOW */ - -#ifdef DEBUG_VERSION_SHOW - /* Print version information */ - printk(KERN_NOTICE "%s", version); -#endif -} /* wv_init_info */ - -/********************* IOCTL, STATS & RECONFIG *********************/ -/* - * We found here routines that are called by Linux on different - * occasions after the configuration and not for transmitting data - * These may be called when the user use ifconfig, /proc/net/dev - * or wireless extensions - */ - - -/*------------------------------------------------------------------*/ -/* - * Set or clear the multicast filter for this adaptor. - * num_addrs == -1 Promiscuous mode, receive all packets - * num_addrs == 0 Normal mode, clear multicast list - * num_addrs > 0 Multicast mode, receive normal and MC packets, - * and do best-effort filtering. - */ -static void wavelan_set_multicast_list(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - -#ifdef DEBUG_IOCTL_TRACE - printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", - dev->name); -#endif - -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG - "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n", - dev->name, dev->flags, dev->mc_count); -#endif - - /* Are we asking for promiscuous mode, - * or all multicast addresses (we don't have that!) - * or too many multicast addresses for the hardware filter? */ - if ((dev->flags & IFF_PROMISC) || - (dev->flags & IFF_ALLMULTI) || - (dev->mc_count > I82586_MAX_MULTICAST_ADDRESSES)) { - /* - * Enable promiscuous mode: receive all packets. - */ - if (!lp->promiscuous) { - lp->promiscuous = 1; - lp->mc_count = 0; - - wv_82586_reconfig(dev); - } - } else - /* Are there multicast addresses to send? */ - if (dev->mc_list != (struct dev_mc_list *) NULL) { - /* - * Disable promiscuous mode, but receive all packets - * in multicast list - */ -#ifdef MULTICAST_AVOID - if (lp->promiscuous || (dev->mc_count != lp->mc_count)) -#endif - { - lp->promiscuous = 0; - lp->mc_count = dev->mc_count; - - wv_82586_reconfig(dev); - } - } else { - /* - * Switch to normal mode: disable promiscuous mode and - * clear the multicast list. - */ - if (lp->promiscuous || lp->mc_count == 0) { - lp->promiscuous = 0; - lp->mc_count = 0; - - wv_82586_reconfig(dev); - } - } -#ifdef DEBUG_IOCTL_TRACE - printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", - dev->name); -#endif -} - -/*------------------------------------------------------------------*/ -/* - * This function doesn't exist. - * (Note : it was a nice way to test the reconfigure stuff...) - */ -#ifdef SET_MAC_ADDRESS -static int wavelan_set_mac_address(struct net_device * dev, void *addr) -{ - struct sockaddr *mac = addr; - - /* Copy the address. */ - memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE); - - /* Reconfigure the beast. */ - wv_82586_reconfig(dev); - - return 0; -} -#endif /* SET_MAC_ADDRESS */ - - -/*------------------------------------------------------------------*/ -/* - * Frequency setting (for hardware capable of it) - * It's a bit complicated and you don't really want to look into it. - * (called in wavelan_ioctl) - */ -static int wv_set_frequency(unsigned long ioaddr, /* I/O port of the card */ - iw_freq * frequency) -{ - const int BAND_NUM = 10; /* Number of bands */ - long freq = 0L; /* offset to 2.4 GHz in .5 MHz */ -#ifdef DEBUG_IOCTL_INFO - int i; -#endif - - /* Setting by frequency */ - /* Theoretically, you may set any frequency between - * the two limits with a 0.5 MHz precision. In practice, - * I don't want you to have trouble with local regulations. - */ - if ((frequency->e == 1) && - (frequency->m >= (int) 2.412e8) - && (frequency->m <= (int) 2.487e8)) { - freq = ((frequency->m / 10000) - 24000L) / 5; - } - - /* Setting by channel (same as wfreqsel) */ - /* Warning: each channel is 22 MHz wide, so some of the channels - * will interfere. */ - if ((frequency->e == 0) && (frequency->m < BAND_NUM)) { - /* Get frequency offset. */ - freq = channel_bands[frequency->m] >> 1; - } - - /* Verify that the frequency is allowed. */ - if (freq != 0L) { - u16 table[10]; /* Authorized frequency table */ - - /* Read the frequency table. */ - fee_read(ioaddr, 0x71, table, 10); - -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG "Frequency table: "); - for (i = 0; i < 10; i++) { - printk(" %04X", table[i]); - } - printk("\n"); -#endif - - /* Look in the table to see whether the frequency is allowed. */ - if (!(table[9 - ((freq - 24) / 16)] & - (1 << ((freq - 24) % 16)))) return -EINVAL; /* not allowed */ - } else - return -EINVAL; - - /* if we get a usable frequency */ - if (freq != 0L) { - unsigned short area[16]; - unsigned short dac[2]; - unsigned short area_verify[16]; - unsigned short dac_verify[2]; - /* Corresponding gain (in the power adjust value table) - * See AT&T WaveLAN Data Manual, REF 407-024689/E, page 3-8 - * and WCIN062D.DOC, page 6.2.9. */ - unsigned short power_limit[] = { 40, 80, 120, 160, 0 }; - int power_band = 0; /* Selected band */ - unsigned short power_adjust; /* Correct value */ - - /* Search for the gain. */ - power_band = 0; - while ((freq > power_limit[power_band]) && - (power_limit[++power_band] != 0)); - - /* Read the first area. */ - fee_read(ioaddr, 0x00, area, 16); - - /* Read the DAC. */ - fee_read(ioaddr, 0x60, dac, 2); - - /* Read the new power adjust value. */ - fee_read(ioaddr, 0x6B - (power_band >> 1), &power_adjust, - 1); - if (power_band & 0x1) - power_adjust >>= 8; - else - power_adjust &= 0xFF; - -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG "WaveLAN EEPROM Area 1: "); - for (i = 0; i < 16; i++) { - printk(" %04X", area[i]); - } - printk("\n"); - - printk(KERN_DEBUG "WaveLAN EEPROM DAC: %04X %04X\n", - dac[0], dac[1]); -#endif - - /* Frequency offset (for info only) */ - area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F); - - /* Receiver Principle main divider coefficient */ - area[3] = (freq >> 1) + 2400L - 352L; - area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF); - - /* Transmitter Main divider coefficient */ - area[13] = (freq >> 1) + 2400L; - area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF); - - /* Other parts of the area are flags, bit streams or unused. */ - - /* Set the value in the DAC. */ - dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80); - dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF); - - /* Write the first area. */ - fee_write(ioaddr, 0x00, area, 16); - - /* Write the DAC. */ - fee_write(ioaddr, 0x60, dac, 2); - - /* We now should verify here that the writing of the EEPROM went OK. */ - - /* Reread the first area. */ - fee_read(ioaddr, 0x00, area_verify, 16); - - /* Reread the DAC. */ - fee_read(ioaddr, 0x60, dac_verify, 2); - - /* Compare. */ - if (memcmp(area, area_verify, 16 * 2) || - memcmp(dac, dac_verify, 2 * 2)) { -#ifdef DEBUG_IOCTL_ERROR - printk(KERN_INFO - "WaveLAN: wv_set_frequency: unable to write new frequency to EEPROM(?).\n"); -#endif - return -EOPNOTSUPP; - } - - /* We must download the frequency parameters to the - * synthesizers (from the EEPROM - area 1) - * Note: as the EEPROM is automatically decremented, we set the end - * if the area... */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x0F); - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), - MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD); - - /* Wait until the download is finished. */ - fee_wait(ioaddr, 100, 100); - - /* We must now download the power adjust value (gain) to - * the synthesizers (from the EEPROM - area 7 - DAC). */ - mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x61); - mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), - MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD); - - /* Wait for the download to finish. */ - fee_wait(ioaddr, 100, 100); - -#ifdef DEBUG_IOCTL_INFO - /* Verification of what we have done */ - - printk(KERN_DEBUG "WaveLAN EEPROM Area 1: "); - for (i = 0; i < 16; i++) { - printk(" %04X", area_verify[i]); - } - printk("\n"); - - printk(KERN_DEBUG "WaveLAN EEPROM DAC: %04X %04X\n", - dac_verify[0], dac_verify[1]); -#endif - - return 0; - } else - return -EINVAL; /* Bah, never get there... */ -} - -/*------------------------------------------------------------------*/ -/* - * Give the list of available frequencies. - */ -static int wv_frequency_list(unsigned long ioaddr, /* I/O port of the card */ - iw_freq * list, /* List of frequencies to fill */ - int max) -{ /* Maximum number of frequencies */ - u16 table[10]; /* Authorized frequency table */ - long freq = 0L; /* offset to 2.4 GHz in .5 MHz + 12 MHz */ - int i; /* index in the table */ - int c = 0; /* Channel number */ - - /* Read the frequency table. */ - fee_read(ioaddr, 0x71 /* frequency table */ , table, 10); - - /* Check all frequencies. */ - i = 0; - for (freq = 0; freq < 150; freq++) - /* Look in the table if the frequency is allowed */ - if (table[9 - (freq / 16)] & (1 << (freq % 16))) { - /* Compute approximate channel number */ - while ((c < ARRAY_SIZE(channel_bands)) && - (((channel_bands[c] >> 1) - 24) < freq)) - c++; - list[i].i = c; /* Set the list index */ - - /* put in the list */ - list[i].m = (((freq + 24) * 5) + 24000L) * 10000; - list[i++].e = 1; - - /* Check number. */ - if (i >= max) - return (i); - } - - return (i); -} - -#ifdef IW_WIRELESS_SPY -/*------------------------------------------------------------------*/ -/* - * Gather wireless spy statistics: for each packet, compare the source - * address with our list, and if they match, get the statistics. - * Sorry, but this function really needs the wireless extensions. - */ -static inline void wl_spy_gather(struct net_device * dev, - u8 * mac, /* MAC address */ - u8 * stats) /* Statistics to gather */ -{ - struct iw_quality wstats; - - wstats.qual = stats[2] & MMR_SGNL_QUAL; - wstats.level = stats[0] & MMR_SIGNAL_LVL; - wstats.noise = stats[1] & MMR_SILENCE_LVL; - wstats.updated = 0x7; - - /* Update spy records */ - wireless_spy_update(dev, mac, &wstats); -} -#endif /* IW_WIRELESS_SPY */ - -#ifdef HISTOGRAM -/*------------------------------------------------------------------*/ -/* - * This function calculates a histogram of the signal level. - * As the noise is quite constant, it's like doing it on the SNR. - * We have defined a set of interval (lp->his_range), and each time - * the level goes in that interval, we increment the count (lp->his_sum). - * With this histogram you may detect if one WaveLAN is really weak, - * or you may also calculate the mean and standard deviation of the level. - */ -static inline void wl_his_gather(struct net_device * dev, u8 * stats) -{ /* Statistics to gather */ - net_local *lp = netdev_priv(dev); - u8 level = stats[0] & MMR_SIGNAL_LVL; - int i; - - /* Find the correct interval. */ - i = 0; - while ((i < (lp->his_number - 1)) - && (level >= lp->his_range[i++])); - - /* Increment interval counter. */ - (lp->his_sum[i])++; -} -#endif /* HISTOGRAM */ - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get protocol name - */ -static int wavelan_get_name(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - strcpy(wrqu->name, "WaveLAN"); - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set NWID - */ -static int wavelan_set_nwid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - psa_t psa; - mm_t m; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Set NWID in WaveLAN. */ - if (!wrqu->nwid.disabled) { - /* Set NWID in psa */ - psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8; - psa.psa_nwid[1] = wrqu->nwid.value & 0xFF; - psa.psa_nwid_select = 0x01; - psa_write(ioaddr, lp->hacr, - (char *) psa.psa_nwid - (char *) &psa, - (unsigned char *) psa.psa_nwid, 3); - - /* Set NWID in mmc. */ - m.w.mmw_netw_id_l = psa.psa_nwid[1]; - m.w.mmw_netw_id_h = psa.psa_nwid[0]; - mmc_write(ioaddr, - (char *) &m.w.mmw_netw_id_l - - (char *) &m, - (unsigned char *) &m.w.mmw_netw_id_l, 2); - mmc_out(ioaddr, mmwoff(0, mmw_loopt_sel), 0x00); - } else { - /* Disable NWID in the psa. */ - psa.psa_nwid_select = 0x00; - psa_write(ioaddr, lp->hacr, - (char *) &psa.psa_nwid_select - - (char *) &psa, - (unsigned char *) &psa.psa_nwid_select, - 1); - - /* Disable NWID in the mmc (no filtering). */ - mmc_out(ioaddr, mmwoff(0, mmw_loopt_sel), - MMW_LOOPT_SEL_DIS_NWID); - } - /* update the Wavelan checksum */ - update_psa_checksum(dev, ioaddr, lp->hacr); - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get NWID - */ -static int wavelan_get_nwid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - psa_t psa; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Read the NWID. */ - psa_read(ioaddr, lp->hacr, - (char *) psa.psa_nwid - (char *) &psa, - (unsigned char *) psa.psa_nwid, 3); - wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1]; - wrqu->nwid.disabled = !(psa.psa_nwid_select); - wrqu->nwid.fixed = 1; /* Superfluous */ - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set frequency - */ -static int wavelan_set_freq(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - unsigned long flags; - int ret; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */ - if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & - (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) - ret = wv_set_frequency(ioaddr, &(wrqu->freq)); - else - ret = -EOPNOTSUPP; - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get frequency - */ -static int wavelan_get_freq(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - psa_t psa; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). - * Does it work for everybody, especially old cards? */ - if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & - (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { - unsigned short freq; - - /* Ask the EEPROM to read the frequency from the first area. */ - fee_read(ioaddr, 0x00, &freq, 1); - wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000; - wrqu->freq.e = 1; - } else { - psa_read(ioaddr, lp->hacr, - (char *) &psa.psa_subband - (char *) &psa, - (unsigned char *) &psa.psa_subband, 1); - - if (psa.psa_subband <= 4) { - wrqu->freq.m = fixed_bands[psa.psa_subband]; - wrqu->freq.e = (psa.psa_subband != 0); - } else - ret = -EOPNOTSUPP; - } - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set level threshold - */ -static int wavelan_set_sens(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - psa_t psa; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Set the level threshold. */ - /* We should complain loudly if wrqu->sens.fixed = 0, because we - * can't set auto mode... */ - psa.psa_thr_pre_set = wrqu->sens.value & 0x3F; - psa_write(ioaddr, lp->hacr, - (char *) &psa.psa_thr_pre_set - (char *) &psa, - (unsigned char *) &psa.psa_thr_pre_set, 1); - /* update the Wavelan checksum */ - update_psa_checksum(dev, ioaddr, lp->hacr); - mmc_out(ioaddr, mmwoff(0, mmw_thr_pre_set), - psa.psa_thr_pre_set); - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get level threshold - */ -static int wavelan_get_sens(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - psa_t psa; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Read the level threshold. */ - psa_read(ioaddr, lp->hacr, - (char *) &psa.psa_thr_pre_set - (char *) &psa, - (unsigned char *) &psa.psa_thr_pre_set, 1); - wrqu->sens.value = psa.psa_thr_pre_set & 0x3F; - wrqu->sens.fixed = 1; - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set encryption key - */ -static int wavelan_set_encode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - unsigned long flags; - psa_t psa; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Check if capable of encryption */ - if (!mmc_encr(ioaddr)) { - ret = -EOPNOTSUPP; - } - - /* Check the size of the key */ - if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) { - ret = -EINVAL; - } - - if(!ret) { - /* Basic checking... */ - if (wrqu->encoding.length == 8) { - /* Copy the key in the driver */ - memcpy(psa.psa_encryption_key, extra, - wrqu->encoding.length); - psa.psa_encryption_select = 1; - - psa_write(ioaddr, lp->hacr, - (char *) &psa.psa_encryption_select - - (char *) &psa, - (unsigned char *) &psa. - psa_encryption_select, 8 + 1); - - mmc_out(ioaddr, mmwoff(0, mmw_encr_enable), - MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE); - mmc_write(ioaddr, mmwoff(0, mmw_encr_key), - (unsigned char *) &psa. - psa_encryption_key, 8); - } - - /* disable encryption */ - if (wrqu->encoding.flags & IW_ENCODE_DISABLED) { - psa.psa_encryption_select = 0; - psa_write(ioaddr, lp->hacr, - (char *) &psa.psa_encryption_select - - (char *) &psa, - (unsigned char *) &psa. - psa_encryption_select, 1); - - mmc_out(ioaddr, mmwoff(0, mmw_encr_enable), 0); - } - /* update the Wavelan checksum */ - update_psa_checksum(dev, ioaddr, lp->hacr); - } - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get encryption key - */ -static int wavelan_get_encode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - psa_t psa; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Check if encryption is available */ - if (!mmc_encr(ioaddr)) { - ret = -EOPNOTSUPP; - } else { - /* Read the encryption key */ - psa_read(ioaddr, lp->hacr, - (char *) &psa.psa_encryption_select - - (char *) &psa, - (unsigned char *) &psa. - psa_encryption_select, 1 + 8); - - /* encryption is enabled ? */ - if (psa.psa_encryption_select) - wrqu->encoding.flags = IW_ENCODE_ENABLED; - else - wrqu->encoding.flags = IW_ENCODE_DISABLED; - wrqu->encoding.flags |= mmc_encr(ioaddr); - - /* Copy the key to the user buffer */ - wrqu->encoding.length = 8; - memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length); - } - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get range info - */ -static int wavelan_get_range(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - struct iw_range *range = (struct iw_range *) extra; - unsigned long flags; - int ret = 0; - - /* Set the length (very important for backward compatibility) */ - wrqu->data.length = sizeof(struct iw_range); - - /* Set all the info we don't care or don't know about to zero */ - memset(range, 0, sizeof(struct iw_range)); - - /* Set the Wireless Extension versions */ - range->we_version_compiled = WIRELESS_EXT; - range->we_version_source = 9; - - /* Set information in the range struct. */ - range->throughput = 1.6 * 1000 * 1000; /* don't argue on this ! */ - range->min_nwid = 0x0000; - range->max_nwid = 0xFFFF; - - range->sensitivity = 0x3F; - range->max_qual.qual = MMR_SGNL_QUAL; - range->max_qual.level = MMR_SIGNAL_LVL; - range->max_qual.noise = MMR_SILENCE_LVL; - range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */ - /* Need to get better values for those two */ - range->avg_qual.level = 30; - range->avg_qual.noise = 8; - - range->num_bitrates = 1; - range->bitrate[0] = 2000000; /* 2 Mb/s */ - - /* Event capability (kernel + driver) */ - range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) | - IW_EVENT_CAPA_MASK(0x8B04)); - range->event_capa[1] = IW_EVENT_CAPA_K_1; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */ - if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & - (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { - range->num_channels = 10; - range->num_frequency = wv_frequency_list(ioaddr, range->freq, - IW_MAX_FREQUENCIES); - } else - range->num_channels = range->num_frequency = 0; - - /* Encryption supported ? */ - if (mmc_encr(ioaddr)) { - range->encoding_size[0] = 8; /* DES = 64 bits key */ - range->num_encoding_sizes = 1; - range->max_encoding_tokens = 1; /* Only one key possible */ - } else { - range->num_encoding_sizes = 0; - range->max_encoding_tokens = 0; - } - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Private Handler : set quality threshold - */ -static int wavelan_set_qthr(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - psa_t psa; - unsigned long flags; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - psa.psa_quality_thr = *(extra) & 0x0F; - psa_write(ioaddr, lp->hacr, - (char *) &psa.psa_quality_thr - (char *) &psa, - (unsigned char *) &psa.psa_quality_thr, 1); - /* update the Wavelan checksum */ - update_psa_checksum(dev, ioaddr, lp->hacr); - mmc_out(ioaddr, mmwoff(0, mmw_quality_thr), - psa.psa_quality_thr); - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Private Handler : get quality threshold - */ -static int wavelan_get_qthr(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); /* lp is not unused */ - psa_t psa; - unsigned long flags; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - psa_read(ioaddr, lp->hacr, - (char *) &psa.psa_quality_thr - (char *) &psa, - (unsigned char *) &psa.psa_quality_thr, 1); - *(extra) = psa.psa_quality_thr & 0x0F; - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return 0; -} - -#ifdef HISTOGRAM -/*------------------------------------------------------------------*/ -/* - * Wireless Private Handler : set histogram - */ -static int wavelan_set_histo(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); /* lp is not unused */ - - /* Check the number of intervals. */ - if (wrqu->data.length > 16) { - return(-E2BIG); - } - - /* Disable histo while we copy the addresses. - * As we don't disable interrupts, we need to do this */ - lp->his_number = 0; - - /* Are there ranges to copy? */ - if (wrqu->data.length > 0) { - /* Copy interval ranges to the driver */ - memcpy(lp->his_range, extra, wrqu->data.length); - - { - int i; - printk(KERN_DEBUG "Histo :"); - for(i = 0; i < wrqu->data.length; i++) - printk(" %d", lp->his_range[i]); - printk("\n"); - } - - /* Reset result structure. */ - memset(lp->his_sum, 0x00, sizeof(long) * 16); - } - - /* Now we can set the number of ranges */ - lp->his_number = wrqu->data.length; - - return(0); -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Private Handler : get histogram - */ -static int wavelan_get_histo(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); /* lp is not unused */ - - /* Set the number of intervals. */ - wrqu->data.length = lp->his_number; - - /* Give back the distribution statistics */ - if(lp->his_number > 0) - memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number); - - return(0); -} -#endif /* HISTOGRAM */ - -/*------------------------------------------------------------------*/ -/* - * Structures to export the Wireless Handlers - */ - -static const iw_handler wavelan_handler[] = -{ - NULL, /* SIOCSIWNAME */ - wavelan_get_name, /* SIOCGIWNAME */ - wavelan_set_nwid, /* SIOCSIWNWID */ - wavelan_get_nwid, /* SIOCGIWNWID */ - wavelan_set_freq, /* SIOCSIWFREQ */ - wavelan_get_freq, /* SIOCGIWFREQ */ - NULL, /* SIOCSIWMODE */ - NULL, /* SIOCGIWMODE */ - wavelan_set_sens, /* SIOCSIWSENS */ - wavelan_get_sens, /* SIOCGIWSENS */ - NULL, /* SIOCSIWRANGE */ - wavelan_get_range, /* SIOCGIWRANGE */ - NULL, /* SIOCSIWPRIV */ - NULL, /* SIOCGIWPRIV */ - NULL, /* SIOCSIWSTATS */ - NULL, /* SIOCGIWSTATS */ - iw_handler_set_spy, /* SIOCSIWSPY */ - iw_handler_get_spy, /* SIOCGIWSPY */ - iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ - iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ - NULL, /* SIOCSIWAP */ - NULL, /* SIOCGIWAP */ - NULL, /* -- hole -- */ - NULL, /* SIOCGIWAPLIST */ - NULL, /* -- hole -- */ - NULL, /* -- hole -- */ - NULL, /* SIOCSIWESSID */ - NULL, /* SIOCGIWESSID */ - NULL, /* SIOCSIWNICKN */ - NULL, /* SIOCGIWNICKN */ - NULL, /* -- hole -- */ - NULL, /* -- hole -- */ - NULL, /* SIOCSIWRATE */ - NULL, /* SIOCGIWRATE */ - NULL, /* SIOCSIWRTS */ - NULL, /* SIOCGIWRTS */ - NULL, /* SIOCSIWFRAG */ - NULL, /* SIOCGIWFRAG */ - NULL, /* SIOCSIWTXPOW */ - NULL, /* SIOCGIWTXPOW */ - NULL, /* SIOCSIWRETRY */ - NULL, /* SIOCGIWRETRY */ - /* Bummer ! Why those are only at the end ??? */ - wavelan_set_encode, /* SIOCSIWENCODE */ - wavelan_get_encode, /* SIOCGIWENCODE */ -}; - -static const iw_handler wavelan_private_handler[] = -{ - wavelan_set_qthr, /* SIOCIWFIRSTPRIV */ - wavelan_get_qthr, /* SIOCIWFIRSTPRIV + 1 */ -#ifdef HISTOGRAM - wavelan_set_histo, /* SIOCIWFIRSTPRIV + 2 */ - wavelan_get_histo, /* SIOCIWFIRSTPRIV + 3 */ -#endif /* HISTOGRAM */ -}; - -static const struct iw_priv_args wavelan_private_args[] = { -/*{ cmd, set_args, get_args, name } */ - { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" }, - { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" }, - { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16, 0, "sethisto" }, - { SIOCGIPHISTO, 0, IW_PRIV_TYPE_INT | 16, "gethisto" }, -}; - -static const struct iw_handler_def wavelan_handler_def = -{ - .num_standard = ARRAY_SIZE(wavelan_handler), - .num_private = ARRAY_SIZE(wavelan_private_handler), - .num_private_args = ARRAY_SIZE(wavelan_private_args), - .standard = wavelan_handler, - .private = wavelan_private_handler, - .private_args = wavelan_private_args, - .get_wireless_stats = wavelan_get_wireless_stats, -}; - -/*------------------------------------------------------------------*/ -/* - * Get wireless statistics. - * Called by /proc/net/wireless - */ -static iw_stats *wavelan_get_wireless_stats(struct net_device * dev) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); - mmr_t m; - iw_stats *wstats; - unsigned long flags; - -#ifdef DEBUG_IOCTL_TRACE - printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", - dev->name); -#endif - - /* Check */ - if (lp == (net_local *) NULL) - return (iw_stats *) NULL; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - wstats = &lp->wstats; - - /* Get data from the mmc. */ - mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1); - - mmc_read(ioaddr, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1); - mmc_read(ioaddr, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, - 2); - mmc_read(ioaddr, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, - 4); - - mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0); - - /* Copy data to wireless stuff. */ - wstats->status = m.mmr_dce_status & MMR_DCE_STATUS; - wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL; - wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL; - wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL; - wstats->qual.updated = (((m. mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) - | ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) - | ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5)); - wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; - wstats->discard.code = 0L; - wstats->discard.misc = 0L; - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - -#ifdef DEBUG_IOCTL_TRACE - printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", - dev->name); -#endif - return &lp->wstats; -} - -/************************* PACKET RECEPTION *************************/ -/* - * This part deals with receiving the packets. - * The interrupt handler gets an interrupt when a packet has been - * successfully received and calls this part. - */ - -/*------------------------------------------------------------------*/ -/* - * This routine does the actual copying of data (including the Ethernet - * header structure) from the WaveLAN card to an sk_buff chain that - * will be passed up to the network interface layer. NOTE: we - * currently don't handle trailer protocols (neither does the rest of - * the network interface), so if that is needed, it will (at least in - * part) be added here. The contents of the receive ring buffer are - * copied to a message chain that is then passed to the kernel. - * - * Note: if any errors occur, the packet is "dropped on the floor". - * (called by wv_packet_rcv()) - */ -static void -wv_packet_read(struct net_device * dev, u16 buf_off, int sksize) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - struct sk_buff *skb; - -#ifdef DEBUG_RX_TRACE - printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n", - dev->name, buf_off, sksize); -#endif - - /* Allocate buffer for the data */ - if ((skb = dev_alloc_skb(sksize)) == (struct sk_buff *) NULL) { -#ifdef DEBUG_RX_ERROR - printk(KERN_INFO - "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC).\n", - dev->name, sksize); -#endif - dev->stats.rx_dropped++; - return; - } - - /* Copy the packet to the buffer. */ - obram_read(ioaddr, buf_off, skb_put(skb, sksize), sksize); - skb->protocol = eth_type_trans(skb, dev); - -#ifdef DEBUG_RX_INFO - wv_packet_info(skb_mac_header(skb), sksize, dev->name, - "wv_packet_read"); -#endif /* DEBUG_RX_INFO */ - - /* Statistics-gathering and associated stuff. - * It seem a bit messy with all the define, but it's really - * simple... */ - if ( -#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */ - (lp->spy_data.spy_number > 0) || -#endif /* IW_WIRELESS_SPY */ -#ifdef HISTOGRAM - (lp->his_number > 0) || -#endif /* HISTOGRAM */ - 0) { - u8 stats[3]; /* signal level, noise level, signal quality */ - - /* Read signal level, silence level and signal quality bytes */ - /* Note: in the PCMCIA hardware, these are part of the frame. - * It seems that for the ISA hardware, it's nowhere to be - * found in the frame, so I'm obliged to do this (it has a - * side effect on /proc/net/wireless). - * Any ideas? - */ - mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1); - mmc_read(ioaddr, mmroff(0, mmr_signal_lvl), stats, 3); - mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0); - -#ifdef DEBUG_RX_INFO - printk(KERN_DEBUG - "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n", - dev->name, stats[0] & 0x3F, stats[1] & 0x3F, - stats[2] & 0x0F); -#endif - - /* Spying stuff */ -#ifdef IW_WIRELESS_SPY - wl_spy_gather(dev, skb_mac_header(skb) + WAVELAN_ADDR_SIZE, - stats); -#endif /* IW_WIRELESS_SPY */ -#ifdef HISTOGRAM - wl_his_gather(dev, stats); -#endif /* HISTOGRAM */ - } - - /* - * Hand the packet to the network module. - */ - netif_rx(skb); - - /* Keep statistics up to date */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += sksize; - -#ifdef DEBUG_RX_TRACE - printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name); -#endif -} - -/*------------------------------------------------------------------*/ -/* - * Transfer as many packets as we can - * from the device RAM. - * (called in wavelan_interrupt()). - * Note : the spinlock is already grabbed for us. - */ -static void wv_receive(struct net_device * dev) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); - fd_t fd; - rbd_t rbd; - int nreaped = 0; - -#ifdef DEBUG_RX_TRACE - printk(KERN_DEBUG "%s: ->wv_receive()\n", dev->name); -#endif - - /* Loop on each received packet. */ - for (;;) { - obram_read(ioaddr, lp->rx_head, (unsigned char *) &fd, - sizeof(fd)); - - /* Note about the status : - * It start up to be 0 (the value we set). Then, when the RU - * grab the buffer to prepare for reception, it sets the - * FD_STATUS_B flag. When the RU has finished receiving the - * frame, it clears FD_STATUS_B, set FD_STATUS_C to indicate - * completion and set the other flags to indicate the eventual - * errors. FD_STATUS_OK indicates that the reception was OK. - */ - - /* If the current frame is not complete, we have reached the end. */ - if ((fd.fd_status & FD_STATUS_C) != FD_STATUS_C) - break; /* This is how we exit the loop. */ - - nreaped++; - - /* Check whether frame was correctly received. */ - if ((fd.fd_status & FD_STATUS_OK) == FD_STATUS_OK) { - /* Does the frame contain a pointer to the data? Let's check. */ - if (fd.fd_rbd_offset != I82586NULL) { - /* Read the receive buffer descriptor */ - obram_read(ioaddr, fd.fd_rbd_offset, - (unsigned char *) &rbd, - sizeof(rbd)); - -#ifdef DEBUG_RX_ERROR - if ((rbd.rbd_status & RBD_STATUS_EOF) != - RBD_STATUS_EOF) printk(KERN_INFO - "%s: wv_receive(): missing EOF flag.\n", - dev->name); - - if ((rbd.rbd_status & RBD_STATUS_F) != - RBD_STATUS_F) printk(KERN_INFO - "%s: wv_receive(): missing F flag.\n", - dev->name); -#endif /* DEBUG_RX_ERROR */ - - /* Read the packet and transmit to Linux */ - wv_packet_read(dev, rbd.rbd_bufl, - rbd. - rbd_status & - RBD_STATUS_ACNT); - } -#ifdef DEBUG_RX_ERROR - else /* if frame has no data */ - printk(KERN_INFO - "%s: wv_receive(): frame has no data.\n", - dev->name); -#endif - } else { /* If reception was no successful */ - - dev->stats.rx_errors++; - -#ifdef DEBUG_RX_INFO - printk(KERN_DEBUG - "%s: wv_receive(): frame not received successfully (%X).\n", - dev->name, fd.fd_status); -#endif - -#ifdef DEBUG_RX_ERROR - if ((fd.fd_status & FD_STATUS_S6) != 0) - printk(KERN_INFO - "%s: wv_receive(): no EOF flag.\n", - dev->name); -#endif - - if ((fd.fd_status & FD_STATUS_S7) != 0) { - dev->stats.rx_length_errors++; -#ifdef DEBUG_RX_FAIL - printk(KERN_DEBUG - "%s: wv_receive(): frame too short.\n", - dev->name); -#endif - } - - if ((fd.fd_status & FD_STATUS_S8) != 0) { - dev->stats.rx_over_errors++; -#ifdef DEBUG_RX_FAIL - printk(KERN_DEBUG - "%s: wv_receive(): rx DMA overrun.\n", - dev->name); -#endif - } - - if ((fd.fd_status & FD_STATUS_S9) != 0) { - dev->stats.rx_fifo_errors++; -#ifdef DEBUG_RX_FAIL - printk(KERN_DEBUG - "%s: wv_receive(): ran out of resources.\n", - dev->name); -#endif - } - - if ((fd.fd_status & FD_STATUS_S10) != 0) { - dev->stats.rx_frame_errors++; -#ifdef DEBUG_RX_FAIL - printk(KERN_DEBUG - "%s: wv_receive(): alignment error.\n", - dev->name); -#endif - } - - if ((fd.fd_status & FD_STATUS_S11) != 0) { - dev->stats.rx_crc_errors++; -#ifdef DEBUG_RX_FAIL - printk(KERN_DEBUG - "%s: wv_receive(): CRC error.\n", - dev->name); -#endif - } - } - - fd.fd_status = 0; - obram_write(ioaddr, fdoff(lp->rx_head, fd_status), - (unsigned char *) &fd.fd_status, - sizeof(fd.fd_status)); - - fd.fd_command = FD_COMMAND_EL; - obram_write(ioaddr, fdoff(lp->rx_head, fd_command), - (unsigned char *) &fd.fd_command, - sizeof(fd.fd_command)); - - fd.fd_command = 0; - obram_write(ioaddr, fdoff(lp->rx_last, fd_command), - (unsigned char *) &fd.fd_command, - sizeof(fd.fd_command)); - - lp->rx_last = lp->rx_head; - lp->rx_head = fd.fd_link_offset; - } /* for(;;) -> loop on all frames */ - -#ifdef DEBUG_RX_INFO - if (nreaped > 1) - printk(KERN_DEBUG "%s: wv_receive(): reaped %d\n", - dev->name, nreaped); -#endif -#ifdef DEBUG_RX_TRACE - printk(KERN_DEBUG "%s: <-wv_receive()\n", dev->name); -#endif -} - -/*********************** PACKET TRANSMISSION ***********************/ -/* - * This part deals with sending packets through the WaveLAN. - * - */ - -/*------------------------------------------------------------------*/ -/* - * This routine fills in the appropriate registers and memory - * locations on the WaveLAN card and starts the card off on - * the transmit. - * - * The principle: - * Each block contains a transmit command, a NOP command, - * a transmit block descriptor and a buffer. - * The CU read the transmit block which point to the tbd, - * read the tbd and the content of the buffer. - * When it has finish with it, it goes to the next command - * which in our case is the NOP. The NOP points on itself, - * so the CU stop here. - * When we add the next block, we modify the previous nop - * to make it point on the new tx command. - * Simple, isn't it ? - * - * (called in wavelan_packet_xmit()) - */ -static int wv_packet_write(struct net_device * dev, void *buf, short length) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - unsigned short txblock; - unsigned short txpred; - unsigned short tx_addr; - unsigned short nop_addr; - unsigned short tbd_addr; - unsigned short buf_addr; - ac_tx_t tx; - ac_nop_t nop; - tbd_t tbd; - int clen = length; - unsigned long flags; - -#ifdef DEBUG_TX_TRACE - printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, - length); -#endif - - spin_lock_irqsave(&lp->spinlock, flags); - - /* Check nothing bad has happened */ - if (lp->tx_n_in_use == (NTXBLOCKS - 1)) { -#ifdef DEBUG_TX_ERROR - printk(KERN_INFO "%s: wv_packet_write(): Tx queue full.\n", - dev->name); -#endif - spin_unlock_irqrestore(&lp->spinlock, flags); - return 1; - } - - /* Calculate addresses of next block and previous block. */ - txblock = lp->tx_first_free; - txpred = txblock - TXBLOCKZ; - if (txpred < OFFSET_CU) - txpred += NTXBLOCKS * TXBLOCKZ; - lp->tx_first_free += TXBLOCKZ; - if (lp->tx_first_free >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ) - lp->tx_first_free -= NTXBLOCKS * TXBLOCKZ; - - lp->tx_n_in_use++; - - /* Calculate addresses of the different parts of the block. */ - tx_addr = txblock; - nop_addr = tx_addr + sizeof(tx); - tbd_addr = nop_addr + sizeof(nop); - buf_addr = tbd_addr + sizeof(tbd); - - /* - * Transmit command - */ - tx.tx_h.ac_status = 0; - obram_write(ioaddr, toff(ac_tx_t, tx_addr, tx_h.ac_status), - (unsigned char *) &tx.tx_h.ac_status, - sizeof(tx.tx_h.ac_status)); - - /* - * NOP command - */ - nop.nop_h.ac_status = 0; - obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status), - (unsigned char *) &nop.nop_h.ac_status, - sizeof(nop.nop_h.ac_status)); - nop.nop_h.ac_link = nop_addr; - obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link), - (unsigned char *) &nop.nop_h.ac_link, - sizeof(nop.nop_h.ac_link)); - - /* - * Transmit buffer descriptor - */ - tbd.tbd_status = TBD_STATUS_EOF | (TBD_STATUS_ACNT & clen); - tbd.tbd_next_bd_offset = I82586NULL; - tbd.tbd_bufl = buf_addr; - tbd.tbd_bufh = 0; - obram_write(ioaddr, tbd_addr, (unsigned char *) &tbd, sizeof(tbd)); - - /* - * Data - */ - obram_write(ioaddr, buf_addr, buf, length); - - /* - * Overwrite the predecessor NOP link - * so that it points to this txblock. - */ - nop_addr = txpred + sizeof(tx); - nop.nop_h.ac_status = 0; - obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status), - (unsigned char *) &nop.nop_h.ac_status, - sizeof(nop.nop_h.ac_status)); - nop.nop_h.ac_link = txblock; - obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link), - (unsigned char *) &nop.nop_h.ac_link, - sizeof(nop.nop_h.ac_link)); - - /* Make sure the watchdog will keep quiet for a while */ - dev->trans_start = jiffies; - - /* Keep stats up to date. */ - dev->stats.tx_bytes += length; - - if (lp->tx_first_in_use == I82586NULL) - lp->tx_first_in_use = txblock; - - if (lp->tx_n_in_use < NTXBLOCKS - 1) - netif_wake_queue(dev); - - spin_unlock_irqrestore(&lp->spinlock, flags); - -#ifdef DEBUG_TX_INFO - wv_packet_info((u8 *) buf, length, dev->name, - "wv_packet_write"); -#endif /* DEBUG_TX_INFO */ - -#ifdef DEBUG_TX_TRACE - printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name); -#endif - - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * This routine is called when we want to send a packet (NET3 callback) - * In this routine, we check if the harware is ready to accept - * the packet. We also prevent reentrance. Then we call the function - * to send the packet. - */ -static netdev_tx_t wavelan_packet_xmit(struct sk_buff *skb, - struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long flags; - char data[ETH_ZLEN]; - -#ifdef DEBUG_TX_TRACE - printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name, - (unsigned) skb); -#endif - - /* - * Block a timer-based transmit from overlapping. - * In other words, prevent reentering this routine. - */ - netif_stop_queue(dev); - - /* If somebody has asked to reconfigure the controller, - * we can do it now. - */ - if (lp->reconfig_82586) { - spin_lock_irqsave(&lp->spinlock, flags); - wv_82586_config(dev); - spin_unlock_irqrestore(&lp->spinlock, flags); - /* Check that we can continue */ - if (lp->tx_n_in_use == (NTXBLOCKS - 1)) - return NETDEV_TX_BUSY; - } - - /* Do we need some padding? */ - /* Note : on wireless the propagation time is in the order of 1us, - * and we don't have the Ethernet specific requirement of beeing - * able to detect collisions, therefore in theory we don't really - * need to pad. Jean II */ - if (skb->len < ETH_ZLEN) { - memset(data, 0, ETH_ZLEN); - skb_copy_from_linear_data(skb, data, skb->len); - /* Write packet on the card */ - if(wv_packet_write(dev, data, ETH_ZLEN)) - return NETDEV_TX_BUSY; /* We failed */ - } - else if(wv_packet_write(dev, skb->data, skb->len)) - return NETDEV_TX_BUSY; /* We failed */ - - - dev_kfree_skb(skb); - -#ifdef DEBUG_TX_TRACE - printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name); -#endif - return NETDEV_TX_OK; -} - -/*********************** HARDWARE CONFIGURATION ***********************/ -/* - * This part does the real job of starting and configuring the hardware. - */ - -/*--------------------------------------------------------------------*/ -/* - * Routine to initialize the Modem Management Controller. - * (called by wv_hw_reset()) - */ -static int wv_mmc_init(struct net_device * dev) -{ - unsigned long ioaddr = dev->base_addr; - net_local *lp = netdev_priv(dev); - psa_t psa; - mmw_t m; - int configured; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name); -#endif - - /* Read the parameter storage area. */ - psa_read(ioaddr, lp->hacr, 0, (unsigned char *) &psa, sizeof(psa)); - -#ifdef USE_PSA_CONFIG - configured = psa.psa_conf_status & 1; -#else - configured = 0; -#endif - - /* Is the PSA is not configured */ - if (!configured) { - /* User will be able to configure NWID later (with iwconfig). */ - psa.psa_nwid[0] = 0; - psa.psa_nwid[1] = 0; - - /* no NWID checking since NWID is not set */ - psa.psa_nwid_select = 0; - - /* Disable encryption */ - psa.psa_encryption_select = 0; - - /* Set to standard values: - * 0x04 for AT, - * 0x01 for MCA, - * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document) - */ - if (psa.psa_comp_number & 1) - psa.psa_thr_pre_set = 0x01; - else - psa.psa_thr_pre_set = 0x04; - psa.psa_quality_thr = 0x03; - - /* It is configured */ - psa.psa_conf_status |= 1; - -#ifdef USE_PSA_CONFIG - /* Write the psa. */ - psa_write(ioaddr, lp->hacr, - (char *) psa.psa_nwid - (char *) &psa, - (unsigned char *) psa.psa_nwid, 4); - psa_write(ioaddr, lp->hacr, - (char *) &psa.psa_thr_pre_set - (char *) &psa, - (unsigned char *) &psa.psa_thr_pre_set, 1); - psa_write(ioaddr, lp->hacr, - (char *) &psa.psa_quality_thr - (char *) &psa, - (unsigned char *) &psa.psa_quality_thr, 1); - psa_write(ioaddr, lp->hacr, - (char *) &psa.psa_conf_status - (char *) &psa, - (unsigned char *) &psa.psa_conf_status, 1); - /* update the Wavelan checksum */ - update_psa_checksum(dev, ioaddr, lp->hacr); -#endif - } - - /* Zero the mmc structure. */ - memset(&m, 0x00, sizeof(m)); - - /* Copy PSA info to the mmc. */ - m.mmw_netw_id_l = psa.psa_nwid[1]; - m.mmw_netw_id_h = psa.psa_nwid[0]; - - if (psa.psa_nwid_select & 1) - m.mmw_loopt_sel = 0x00; - else - m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID; - - memcpy(&m.mmw_encr_key, &psa.psa_encryption_key, - sizeof(m.mmw_encr_key)); - - if (psa.psa_encryption_select) - m.mmw_encr_enable = - MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE; - else - m.mmw_encr_enable = 0; - - m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F; - m.mmw_quality_thr = psa.psa_quality_thr & 0x0F; - - /* - * Set default modem control parameters. - * See NCR document 407-0024326 Rev. A. - */ - m.mmw_jabber_enable = 0x01; - m.mmw_freeze = 0; - m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN; - m.mmw_ifs = 0x20; - m.mmw_mod_delay = 0x04; - m.mmw_jam_time = 0x38; - - m.mmw_des_io_invert = 0; - m.mmw_decay_prm = 0; - m.mmw_decay_updat_prm = 0; - - /* Write all info to MMC. */ - mmc_write(ioaddr, 0, (u8 *) & m, sizeof(m)); - - /* The following code starts the modem of the 2.00 frequency - * selectable cards at power on. It's not strictly needed for the - * following boots. - * The original patch was by Joe Finney for the PCMCIA driver, but - * I've cleaned it up a bit and added documentation. - * Thanks to Loeke Brederveld from Lucent for the info. - */ - - /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable) - * Does it work for everybody, especially old cards? */ - /* Note: WFREQSEL verifies that it is able to read a sensible - * frequency from EEPROM (address 0x00) and that MMR_FEE_STATUS_ID - * is 0xA (Xilinx version) or 0xB (Ariadne version). - * My test is more crude but does work. */ - if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & - (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { - /* We must download the frequency parameters to the - * synthesizers (from the EEPROM - area 1) - * Note: as the EEPROM is automatically decremented, we set the end - * if the area... */ - m.mmw_fee_addr = 0x0F; - m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD; - mmc_write(ioaddr, (char *) &m.mmw_fee_ctrl - (char *) &m, - (unsigned char *) &m.mmw_fee_ctrl, 2); - - /* Wait until the download is finished. */ - fee_wait(ioaddr, 100, 100); - -#ifdef DEBUG_CONFIG_INFO - /* The frequency was in the last word downloaded. */ - mmc_read(ioaddr, (char *) &m.mmw_fee_data_l - (char *) &m, - (unsigned char *) &m.mmw_fee_data_l, 2); - - /* Print some info for the user. */ - printk(KERN_DEBUG - "%s: WaveLAN 2.00 recognised (frequency select). Current frequency = %ld\n", - dev->name, - ((m. - mmw_fee_data_h << 4) | (m.mmw_fee_data_l >> 4)) * - 5 / 2 + 24000L); -#endif - - /* We must now download the power adjust value (gain) to - * the synthesizers (from the EEPROM - area 7 - DAC). */ - m.mmw_fee_addr = 0x61; - m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD; - mmc_write(ioaddr, (char *) &m.mmw_fee_ctrl - (char *) &m, - (unsigned char *) &m.mmw_fee_ctrl, 2); - - /* Wait until the download is finished. */ - } - /* if 2.00 card */ -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name); -#endif - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Construct the fd and rbd structures. - * Start the receive unit. - * (called by wv_hw_reset()) - */ -static int wv_ru_start(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - u16 scb_cs; - fd_t fd; - rbd_t rbd; - u16 rx; - u16 rx_next; - int i; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name); -#endif - - obram_read(ioaddr, scboff(OFFSET_SCB, scb_status), - (unsigned char *) &scb_cs, sizeof(scb_cs)); - if ((scb_cs & SCB_ST_RUS) == SCB_ST_RUS_RDY) - return 0; - - lp->rx_head = OFFSET_RU; - - for (i = 0, rx = lp->rx_head; i < NRXBLOCKS; i++, rx = rx_next) { - rx_next = - (i == NRXBLOCKS - 1) ? lp->rx_head : rx + RXBLOCKZ; - - fd.fd_status = 0; - fd.fd_command = (i == NRXBLOCKS - 1) ? FD_COMMAND_EL : 0; - fd.fd_link_offset = rx_next; - fd.fd_rbd_offset = rx + sizeof(fd); - obram_write(ioaddr, rx, (unsigned char *) &fd, sizeof(fd)); - - rbd.rbd_status = 0; - rbd.rbd_next_rbd_offset = I82586NULL; - rbd.rbd_bufl = rx + sizeof(fd) + sizeof(rbd); - rbd.rbd_bufh = 0; - rbd.rbd_el_size = RBD_EL | (RBD_SIZE & MAXDATAZ); - obram_write(ioaddr, rx + sizeof(fd), - (unsigned char *) &rbd, sizeof(rbd)); - - lp->rx_last = rx; - } - - obram_write(ioaddr, scboff(OFFSET_SCB, scb_rfa_offset), - (unsigned char *) &lp->rx_head, sizeof(lp->rx_head)); - - scb_cs = SCB_CMD_RUC_GO; - obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), - (unsigned char *) &scb_cs, sizeof(scb_cs)); - - set_chan_attn(ioaddr, lp->hacr); - - for (i = 1000; i > 0; i--) { - obram_read(ioaddr, scboff(OFFSET_SCB, scb_command), - (unsigned char *) &scb_cs, sizeof(scb_cs)); - if (scb_cs == 0) - break; - - udelay(10); - } - - if (i <= 0) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_INFO - "%s: wavelan_ru_start(): board not accepting command.\n", - dev->name); -#endif - return -1; - } -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name); -#endif - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Initialise the transmit blocks. - * Start the command unit executing the NOP - * self-loop of the first transmit block. - * - * Here we create the list of send buffers used to transmit packets - * between the PC and the command unit. For each buffer, we create a - * buffer descriptor (pointing on the buffer), a transmit command - * (pointing to the buffer descriptor) and a NOP command. - * The transmit command is linked to the NOP, and the NOP to itself. - * When we will have finished executing the transmit command, we will - * then loop on the NOP. By releasing the NOP link to a new command, - * we may send another buffer. - * - * (called by wv_hw_reset()) - */ -static int wv_cu_start(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - int i; - u16 txblock; - u16 first_nop; - u16 scb_cs; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_cu_start()\n", dev->name); -#endif - - lp->tx_first_free = OFFSET_CU; - lp->tx_first_in_use = I82586NULL; - - for (i = 0, txblock = OFFSET_CU; - i < NTXBLOCKS; i++, txblock += TXBLOCKZ) { - ac_tx_t tx; - ac_nop_t nop; - tbd_t tbd; - unsigned short tx_addr; - unsigned short nop_addr; - unsigned short tbd_addr; - unsigned short buf_addr; - - tx_addr = txblock; - nop_addr = tx_addr + sizeof(tx); - tbd_addr = nop_addr + sizeof(nop); - buf_addr = tbd_addr + sizeof(tbd); - - tx.tx_h.ac_status = 0; - tx.tx_h.ac_command = acmd_transmit | AC_CFLD_I; - tx.tx_h.ac_link = nop_addr; - tx.tx_tbd_offset = tbd_addr; - obram_write(ioaddr, tx_addr, (unsigned char *) &tx, - sizeof(tx)); - - nop.nop_h.ac_status = 0; - nop.nop_h.ac_command = acmd_nop; - nop.nop_h.ac_link = nop_addr; - obram_write(ioaddr, nop_addr, (unsigned char *) &nop, - sizeof(nop)); - - tbd.tbd_status = TBD_STATUS_EOF; - tbd.tbd_next_bd_offset = I82586NULL; - tbd.tbd_bufl = buf_addr; - tbd.tbd_bufh = 0; - obram_write(ioaddr, tbd_addr, (unsigned char *) &tbd, - sizeof(tbd)); - } - - first_nop = - OFFSET_CU + (NTXBLOCKS - 1) * TXBLOCKZ + sizeof(ac_tx_t); - obram_write(ioaddr, scboff(OFFSET_SCB, scb_cbl_offset), - (unsigned char *) &first_nop, sizeof(first_nop)); - - scb_cs = SCB_CMD_CUC_GO; - obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), - (unsigned char *) &scb_cs, sizeof(scb_cs)); - - set_chan_attn(ioaddr, lp->hacr); - - for (i = 1000; i > 0; i--) { - obram_read(ioaddr, scboff(OFFSET_SCB, scb_command), - (unsigned char *) &scb_cs, sizeof(scb_cs)); - if (scb_cs == 0) - break; - - udelay(10); - } - - if (i <= 0) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_INFO - "%s: wavelan_cu_start(): board not accepting command.\n", - dev->name); -#endif - return -1; - } - - lp->tx_n_in_use = 0; - netif_start_queue(dev); -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_cu_start()\n", dev->name); -#endif - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * This routine does a standard configuration of the WaveLAN - * controller (i82586). - * - * It initialises the scp, iscp and scb structure - * The first two are just pointers to the next. - * The last one is used for basic configuration and for basic - * communication (interrupt status). - * - * (called by wv_hw_reset()) - */ -static int wv_82586_start(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - scp_t scp; /* system configuration pointer */ - iscp_t iscp; /* intermediate scp */ - scb_t scb; /* system control block */ - ach_t cb; /* Action command header */ - u8 zeroes[512]; - int i; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_82586_start()\n", dev->name); -#endif - - /* - * Clear the onboard RAM. - */ - memset(&zeroes[0], 0x00, sizeof(zeroes)); - for (i = 0; i < I82586_MEMZ; i += sizeof(zeroes)) - obram_write(ioaddr, i, &zeroes[0], sizeof(zeroes)); - - /* - * Construct the command unit structures: - * scp, iscp, scb, cb. - */ - memset(&scp, 0x00, sizeof(scp)); - scp.scp_sysbus = SCP_SY_16BBUS; - scp.scp_iscpl = OFFSET_ISCP; - obram_write(ioaddr, OFFSET_SCP, (unsigned char *) &scp, - sizeof(scp)); - - memset(&iscp, 0x00, sizeof(iscp)); - iscp.iscp_busy = 1; - iscp.iscp_offset = OFFSET_SCB; - obram_write(ioaddr, OFFSET_ISCP, (unsigned char *) &iscp, - sizeof(iscp)); - - /* Our first command is to reset the i82586. */ - memset(&scb, 0x00, sizeof(scb)); - scb.scb_command = SCB_CMD_RESET; - scb.scb_cbl_offset = OFFSET_CU; - scb.scb_rfa_offset = OFFSET_RU; - obram_write(ioaddr, OFFSET_SCB, (unsigned char *) &scb, - sizeof(scb)); - - set_chan_attn(ioaddr, lp->hacr); - - /* Wait for command to finish. */ - for (i = 1000; i > 0; i--) { - obram_read(ioaddr, OFFSET_ISCP, (unsigned char *) &iscp, - sizeof(iscp)); - - if (iscp.iscp_busy == (unsigned short) 0) - break; - - udelay(10); - } - - if (i <= 0) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_INFO - "%s: wv_82586_start(): iscp_busy timeout.\n", - dev->name); -#endif - return -1; - } - - /* Check command completion. */ - for (i = 15; i > 0; i--) { - obram_read(ioaddr, OFFSET_SCB, (unsigned char *) &scb, - sizeof(scb)); - - if (scb.scb_status == (SCB_ST_CX | SCB_ST_CNA)) - break; - - udelay(10); - } - - if (i <= 0) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_INFO - "%s: wv_82586_start(): status: expected 0x%02x, got 0x%02x.\n", - dev->name, SCB_ST_CX | SCB_ST_CNA, scb.scb_status); -#endif - return -1; - } - - wv_ack(dev); - - /* Set the action command header. */ - memset(&cb, 0x00, sizeof(cb)); - cb.ac_command = AC_CFLD_EL | (AC_CFLD_CMD & acmd_diagnose); - cb.ac_link = OFFSET_CU; - obram_write(ioaddr, OFFSET_CU, (unsigned char *) &cb, sizeof(cb)); - - if (wv_synchronous_cmd(dev, "diag()") == -1) - return -1; - - obram_read(ioaddr, OFFSET_CU, (unsigned char *) &cb, sizeof(cb)); - if (cb.ac_status & AC_SFLD_FAIL) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_INFO - "%s: wv_82586_start(): i82586 Self Test failed.\n", - dev->name); -#endif - return -1; - } -#ifdef DEBUG_I82586_SHOW - wv_scb_show(ioaddr); -#endif - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_82586_start()\n", dev->name); -#endif - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * This routine does a standard configuration of the WaveLAN - * controller (i82586). - * - * This routine is a violent hack. We use the first free transmit block - * to make our configuration. In the buffer area, we create the three - * configuration commands (linked). We make the previous NOP point to - * the beginning of the buffer instead of the tx command. After, we go - * as usual to the NOP command. - * Note that only the last command (mc_set) will generate an interrupt. - * - * (called by wv_hw_reset(), wv_82586_reconfig(), wavelan_packet_xmit()) - */ -static void wv_82586_config(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - unsigned short txblock; - unsigned short txpred; - unsigned short tx_addr; - unsigned short nop_addr; - unsigned short tbd_addr; - unsigned short cfg_addr; - unsigned short ias_addr; - unsigned short mcs_addr; - ac_tx_t tx; - ac_nop_t nop; - ac_cfg_t cfg; /* Configure action */ - ac_ias_t ias; /* IA-setup action */ - ac_mcs_t mcs; /* Multicast setup */ - struct dev_mc_list *dmi; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_82586_config()\n", dev->name); -#endif - - /* Check nothing bad has happened */ - if (lp->tx_n_in_use == (NTXBLOCKS - 1)) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_INFO "%s: wv_82586_config(): Tx queue full.\n", - dev->name); -#endif - return; - } - - /* Calculate addresses of next block and previous block. */ - txblock = lp->tx_first_free; - txpred = txblock - TXBLOCKZ; - if (txpred < OFFSET_CU) - txpred += NTXBLOCKS * TXBLOCKZ; - lp->tx_first_free += TXBLOCKZ; - if (lp->tx_first_free >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ) - lp->tx_first_free -= NTXBLOCKS * TXBLOCKZ; - - lp->tx_n_in_use++; - - /* Calculate addresses of the different parts of the block. */ - tx_addr = txblock; - nop_addr = tx_addr + sizeof(tx); - tbd_addr = nop_addr + sizeof(nop); - cfg_addr = tbd_addr + sizeof(tbd_t); /* beginning of the buffer */ - ias_addr = cfg_addr + sizeof(cfg); - mcs_addr = ias_addr + sizeof(ias); - - /* - * Transmit command - */ - tx.tx_h.ac_status = 0xFFFF; /* Fake completion value */ - obram_write(ioaddr, toff(ac_tx_t, tx_addr, tx_h.ac_status), - (unsigned char *) &tx.tx_h.ac_status, - sizeof(tx.tx_h.ac_status)); - - /* - * NOP command - */ - nop.nop_h.ac_status = 0; - obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status), - (unsigned char *) &nop.nop_h.ac_status, - sizeof(nop.nop_h.ac_status)); - nop.nop_h.ac_link = nop_addr; - obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link), - (unsigned char *) &nop.nop_h.ac_link, - sizeof(nop.nop_h.ac_link)); - - /* Create a configure action. */ - memset(&cfg, 0x00, sizeof(cfg)); - - /* - * For Linux we invert AC_CFG_ALOC() so as to conform - * to the way that net packets reach us from above. - * (See also ac_tx_t.) - * - * Updated from Wavelan Manual WCIN085B - */ - cfg.cfg_byte_cnt = - AC_CFG_BYTE_CNT(sizeof(ac_cfg_t) - sizeof(ach_t)); - cfg.cfg_fifolim = AC_CFG_FIFOLIM(4); - cfg.cfg_byte8 = AC_CFG_SAV_BF(1) | AC_CFG_SRDY(0); - cfg.cfg_byte9 = AC_CFG_ELPBCK(0) | - AC_CFG_ILPBCK(0) | - AC_CFG_PRELEN(AC_CFG_PLEN_2) | - AC_CFG_ALOC(1) | AC_CFG_ADDRLEN(WAVELAN_ADDR_SIZE); - cfg.cfg_byte10 = AC_CFG_BOFMET(1) | - AC_CFG_ACR(6) | AC_CFG_LINPRIO(0); - cfg.cfg_ifs = 0x20; - cfg.cfg_slotl = 0x0C; - cfg.cfg_byte13 = AC_CFG_RETRYNUM(15) | AC_CFG_SLTTMHI(0); - cfg.cfg_byte14 = AC_CFG_FLGPAD(0) | - AC_CFG_BTSTF(0) | - AC_CFG_CRC16(0) | - AC_CFG_NCRC(0) | - AC_CFG_TNCRS(1) | - AC_CFG_MANCH(0) | - AC_CFG_BCDIS(0) | AC_CFG_PRM(lp->promiscuous); - cfg.cfg_byte15 = AC_CFG_ICDS(0) | - AC_CFG_CDTF(0) | AC_CFG_ICSS(0) | AC_CFG_CSTF(0); -/* - cfg.cfg_min_frm_len = AC_CFG_MNFRM(64); -*/ - cfg.cfg_min_frm_len = AC_CFG_MNFRM(8); - - cfg.cfg_h.ac_command = (AC_CFLD_CMD & acmd_configure); - cfg.cfg_h.ac_link = ias_addr; - obram_write(ioaddr, cfg_addr, (unsigned char *) &cfg, sizeof(cfg)); - - /* Set up the MAC address */ - memset(&ias, 0x00, sizeof(ias)); - ias.ias_h.ac_command = (AC_CFLD_CMD & acmd_ia_setup); - ias.ias_h.ac_link = mcs_addr; - memcpy(&ias.ias_addr[0], (unsigned char *) &dev->dev_addr[0], - sizeof(ias.ias_addr)); - obram_write(ioaddr, ias_addr, (unsigned char *) &ias, sizeof(ias)); - - /* Initialize adapter's Ethernet multicast addresses */ - memset(&mcs, 0x00, sizeof(mcs)); - mcs.mcs_h.ac_command = AC_CFLD_I | (AC_CFLD_CMD & acmd_mc_setup); - mcs.mcs_h.ac_link = nop_addr; - mcs.mcs_cnt = WAVELAN_ADDR_SIZE * lp->mc_count; - obram_write(ioaddr, mcs_addr, (unsigned char *) &mcs, sizeof(mcs)); - - /* Any address to set? */ - if (lp->mc_count) { - for (dmi = dev->mc_list; dmi; dmi = dmi->next) - outsw(PIOP1(ioaddr), (u16 *) dmi->dmi_addr, - WAVELAN_ADDR_SIZE >> 1); - -#ifdef DEBUG_CONFIG_INFO - printk(KERN_DEBUG - "%s: wv_82586_config(): set %d multicast addresses:\n", - dev->name, lp->mc_count); - for (dmi = dev->mc_list; dmi; dmi = dmi->next) - printk(KERN_DEBUG " %pM\n", dmi->dmi_addr); -#endif - } - - /* - * Overwrite the predecessor NOP link - * so that it points to the configure action. - */ - nop_addr = txpred + sizeof(tx); - nop.nop_h.ac_status = 0; - obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status), - (unsigned char *) &nop.nop_h.ac_status, - sizeof(nop.nop_h.ac_status)); - nop.nop_h.ac_link = cfg_addr; - obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link), - (unsigned char *) &nop.nop_h.ac_link, - sizeof(nop.nop_h.ac_link)); - - /* Job done, clear the flag */ - lp->reconfig_82586 = 0; - - if (lp->tx_first_in_use == I82586NULL) - lp->tx_first_in_use = txblock; - - if (lp->tx_n_in_use == (NTXBLOCKS - 1)) - netif_stop_queue(dev); - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_82586_config()\n", dev->name); -#endif -} - -/*------------------------------------------------------------------*/ -/* - * This routine, called by wavelan_close(), gracefully stops the - * WaveLAN controller (i82586). - * (called by wavelan_close()) - */ -static void wv_82586_stop(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - u16 scb_cmd; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_82586_stop()\n", dev->name); -#endif - - /* Suspend both command unit and receive unit. */ - scb_cmd = - (SCB_CMD_CUC & SCB_CMD_CUC_SUS) | (SCB_CMD_RUC & - SCB_CMD_RUC_SUS); - obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), - (unsigned char *) &scb_cmd, sizeof(scb_cmd)); - set_chan_attn(ioaddr, lp->hacr); - - /* No more interrupts */ - wv_ints_off(dev); - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_82586_stop()\n", dev->name); -#endif -} - -/*------------------------------------------------------------------*/ -/* - * Totally reset the WaveLAN and restart it. - * Performs the following actions: - * 1. A power reset (reset DMA) - * 2. Initialize the radio modem (using wv_mmc_init) - * 3. Reset & Configure LAN controller (using wv_82586_start) - * 4. Start the LAN controller's command unit - * 5. Start the LAN controller's receive unit - * (called by wavelan_interrupt(), wavelan_watchdog() & wavelan_open()) - */ -static int wv_hw_reset(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_hw_reset(dev=0x%x)\n", dev->name, - (unsigned int) dev); -#endif - - /* Increase the number of resets done. */ - lp->nresets++; - - wv_hacr_reset(ioaddr); - lp->hacr = HACR_DEFAULT; - - if ((wv_mmc_init(dev) < 0) || (wv_82586_start(dev) < 0)) - return -1; - - /* Enable the card to send interrupts. */ - wv_ints_on(dev); - - /* Start card functions */ - if (wv_cu_start(dev) < 0) - return -1; - - /* Setup the controller and parameters */ - wv_82586_config(dev); - - /* Finish configuration with the receive unit */ - if (wv_ru_start(dev) < 0) - return -1; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name); -#endif - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Check if there is a WaveLAN at the specific base address. - * As a side effect, this reads the MAC address. - * (called in wavelan_probe() and init_module()) - */ -static int wv_check_ioaddr(unsigned long ioaddr, u8 * mac) -{ - int i; /* Loop counter */ - - /* Check if the base address if available. */ - if (!request_region(ioaddr, sizeof(ha_t), "wavelan probe")) - return -EBUSY; /* ioaddr already used */ - - /* Reset host interface */ - wv_hacr_reset(ioaddr); - - /* Read the MAC address from the parameter storage area. */ - psa_read(ioaddr, HACR_DEFAULT, psaoff(0, psa_univ_mac_addr), - mac, 6); - - release_region(ioaddr, sizeof(ha_t)); - - /* - * Check the first three octets of the address for the manufacturer's code. - * Note: if this can't find your WaveLAN card, you've got a - * non-NCR/AT&T/Lucent ISA card. See wavelan.p.h for detail on - * how to configure your card. - */ - for (i = 0; i < ARRAY_SIZE(MAC_ADDRESSES); i++) - if ((mac[0] == MAC_ADDRESSES[i][0]) && - (mac[1] == MAC_ADDRESSES[i][1]) && - (mac[2] == MAC_ADDRESSES[i][2])) - return 0; - -#ifdef DEBUG_CONFIG_INFO - printk(KERN_WARNING - "WaveLAN (0x%3X): your MAC address might be %02X:%02X:%02X.\n", - ioaddr, mac[0], mac[1], mac[2]); -#endif - return -ENODEV; -} - -/************************ INTERRUPT HANDLING ************************/ - -/* - * This function is the interrupt handler for the WaveLAN card. This - * routine will be called whenever: - */ -static irqreturn_t wavelan_interrupt(int irq, void *dev_id) -{ - struct net_device *dev; - unsigned long ioaddr; - net_local *lp; - u16 hasr; - u16 status; - u16 ack_cmd; - - dev = dev_id; - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name); -#endif - - lp = netdev_priv(dev); - ioaddr = dev->base_addr; - -#ifdef DEBUG_INTERRUPT_INFO - /* Check state of our spinlock */ - if(spin_is_locked(&lp->spinlock)) - printk(KERN_DEBUG - "%s: wavelan_interrupt(): spinlock is already locked !!!\n", - dev->name); -#endif - - /* Prevent reentrancy. We need to do that because we may have - * multiple interrupt handler running concurrently. - * It is safe because interrupts are disabled before acquiring - * the spinlock. */ - spin_lock(&lp->spinlock); - - /* We always had spurious interrupts at startup, but lately I - * saw them comming *between* the request_irq() and the - * spin_lock_irqsave() in wavelan_open(), so the spinlock - * protection is no enough. - * So, we also check lp->hacr that will tell us is we enabled - * irqs or not (see wv_ints_on()). - * We can't use netif_running(dev) because we depend on the - * proper processing of the irq generated during the config. */ - - /* Which interrupt it is ? */ - hasr = hasr_read(ioaddr); - -#ifdef DEBUG_INTERRUPT_INFO - printk(KERN_INFO - "%s: wavelan_interrupt(): hasr 0x%04x; hacr 0x%04x.\n", - dev->name, hasr, lp->hacr); -#endif - - /* Check modem interrupt */ - if ((hasr & HASR_MMC_INTR) && (lp->hacr & HACR_MMC_INT_ENABLE)) { - u8 dce_status; - - /* - * Interrupt from the modem management controller. - * This will clear it -- ignored for now. - */ - mmc_read(ioaddr, mmroff(0, mmr_dce_status), &dce_status, - sizeof(dce_status)); - -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO - "%s: wavelan_interrupt(): unexpected mmc interrupt: status 0x%04x.\n", - dev->name, dce_status); -#endif - } - - /* Check if not controller interrupt */ - if (((hasr & HASR_82586_INTR) == 0) || - ((lp->hacr & HACR_82586_INT_ENABLE) == 0)) { -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO - "%s: wavelan_interrupt(): interrupt not coming from i82586 - hasr 0x%04x.\n", - dev->name, hasr); -#endif - spin_unlock (&lp->spinlock); - return IRQ_NONE; - } - - /* Read interrupt data. */ - obram_read(ioaddr, scboff(OFFSET_SCB, scb_status), - (unsigned char *) &status, sizeof(status)); - - /* - * Acknowledge the interrupt(s). - */ - ack_cmd = status & SCB_ST_INT; - obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), - (unsigned char *) &ack_cmd, sizeof(ack_cmd)); - set_chan_attn(ioaddr, lp->hacr); - -#ifdef DEBUG_INTERRUPT_INFO - printk(KERN_DEBUG "%s: wavelan_interrupt(): status 0x%04x.\n", - dev->name, status); -#endif - - /* Command completed. */ - if ((status & SCB_ST_CX) == SCB_ST_CX) { -#ifdef DEBUG_INTERRUPT_INFO - printk(KERN_DEBUG - "%s: wavelan_interrupt(): command completed.\n", - dev->name); -#endif - wv_complete(dev, ioaddr, lp); - } - - /* Frame received. */ - if ((status & SCB_ST_FR) == SCB_ST_FR) { -#ifdef DEBUG_INTERRUPT_INFO - printk(KERN_DEBUG - "%s: wavelan_interrupt(): received packet.\n", - dev->name); -#endif - wv_receive(dev); - } - - /* Check the state of the command unit. */ - if (((status & SCB_ST_CNA) == SCB_ST_CNA) || - (((status & SCB_ST_CUS) != SCB_ST_CUS_ACTV) && - (netif_running(dev)))) { -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO - "%s: wavelan_interrupt(): CU inactive -- restarting\n", - dev->name); -#endif - wv_hw_reset(dev); - } - - /* Check the state of the command unit. */ - if (((status & SCB_ST_RNR) == SCB_ST_RNR) || - (((status & SCB_ST_RUS) != SCB_ST_RUS_RDY) && - (netif_running(dev)))) { -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO - "%s: wavelan_interrupt(): RU not ready -- restarting\n", - dev->name); -#endif - wv_hw_reset(dev); - } - - /* Release spinlock */ - spin_unlock (&lp->spinlock); - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name); -#endif - return IRQ_HANDLED; -} - -/*------------------------------------------------------------------*/ -/* - * Watchdog: when we start a transmission, a timer is set for us in the - * kernel. If the transmission completes, this timer is disabled. If - * the timer expires, we are called and we try to unlock the hardware. - */ -static void wavelan_watchdog(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - unsigned long flags; - unsigned int nreaped; - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name); -#endif - -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n", - dev->name); -#endif - - /* Check that we came here for something */ - if (lp->tx_n_in_use <= 0) { - return; - } - - spin_lock_irqsave(&lp->spinlock, flags); - - /* Try to see if some buffers are not free (in case we missed - * an interrupt */ - nreaped = wv_complete(dev, ioaddr, lp); - -#ifdef DEBUG_INTERRUPT_INFO - printk(KERN_DEBUG - "%s: wavelan_watchdog(): %d reaped, %d remain.\n", - dev->name, nreaped, lp->tx_n_in_use); -#endif - -#ifdef DEBUG_PSA_SHOW - { - psa_t psa; - psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); - wv_psa_show(&psa); - } -#endif -#ifdef DEBUG_MMC_SHOW - wv_mmc_show(dev); -#endif -#ifdef DEBUG_I82586_SHOW - wv_cu_show(dev); -#endif - - /* If no buffer has been freed */ - if (nreaped == 0) { -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO - "%s: wavelan_watchdog(): cleanup failed, trying reset\n", - dev->name); -#endif - wv_hw_reset(dev); - } - - /* At this point, we should have some free Tx buffer ;-) */ - if (lp->tx_n_in_use < NTXBLOCKS - 1) - netif_wake_queue(dev); - - spin_unlock_irqrestore(&lp->spinlock, flags); - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name); -#endif -} - -/********************* CONFIGURATION CALLBACKS *********************/ -/* - * Here are the functions called by the Linux networking code (NET3) - * for initialization, configuration and deinstallations of the - * WaveLAN ISA hardware. - */ - -/*------------------------------------------------------------------*/ -/* - * Configure and start up the WaveLAN PCMCIA adaptor. - * Called by NET3 when it "opens" the device. - */ -static int wavelan_open(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long flags; - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name, - (unsigned int) dev); -#endif - - /* Check irq */ - if (dev->irq == 0) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_WARNING "%s: wavelan_open(): no IRQ\n", - dev->name); -#endif - return -ENXIO; - } - - if (request_irq(dev->irq, &wavelan_interrupt, 0, "WaveLAN", dev) != 0) - { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_WARNING "%s: wavelan_open(): invalid IRQ\n", - dev->name); -#endif - return -EAGAIN; - } - - spin_lock_irqsave(&lp->spinlock, flags); - - if (wv_hw_reset(dev) != -1) { - netif_start_queue(dev); - } else { - free_irq(dev->irq, dev); -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_INFO - "%s: wavelan_open(): impossible to start the card\n", - dev->name); -#endif - spin_unlock_irqrestore(&lp->spinlock, flags); - return -EAGAIN; - } - spin_unlock_irqrestore(&lp->spinlock, flags); - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name); -#endif - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Shut down the WaveLAN ISA card. - * Called by NET3 when it "closes" the device. - */ -static int wavelan_close(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - unsigned long flags; - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name, - (unsigned int) dev); -#endif - - netif_stop_queue(dev); - - /* - * Flush the Tx and disable Rx. - */ - spin_lock_irqsave(&lp->spinlock, flags); - wv_82586_stop(dev); - spin_unlock_irqrestore(&lp->spinlock, flags); - - free_irq(dev->irq, dev); - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name); -#endif - return 0; -} - -static const struct net_device_ops wavelan_netdev_ops = { - .ndo_open = wavelan_open, - .ndo_stop = wavelan_close, - .ndo_start_xmit = wavelan_packet_xmit, - .ndo_set_multicast_list = wavelan_set_multicast_list, - .ndo_tx_timeout = wavelan_watchdog, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, -#ifdef SET_MAC_ADDRESS - .ndo_set_mac_address = wavelan_set_mac_address -#else - .ndo_set_mac_address = eth_mac_addr, -#endif -}; - - -/*------------------------------------------------------------------*/ -/* - * Probe an I/O address, and if the WaveLAN is there configure the - * device structure - * (called by wavelan_probe() and via init_module()). - */ -static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr) -{ - u8 irq_mask; - int irq; - net_local *lp; - mac_addr mac; - int err; - - if (!request_region(ioaddr, sizeof(ha_t), "wavelan")) - return -EADDRINUSE; - - err = wv_check_ioaddr(ioaddr, mac); - if (err) - goto out; - - memcpy(dev->dev_addr, mac, 6); - - dev->base_addr = ioaddr; - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: ->wavelan_config(dev=0x%x, ioaddr=0x%lx)\n", - dev->name, (unsigned int) dev, ioaddr); -#endif - - /* Check IRQ argument on command line. */ - if (dev->irq != 0) { - irq_mask = wv_irq_to_psa(dev->irq); - - if (irq_mask == 0) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_WARNING - "%s: wavelan_config(): invalid IRQ %d ignored.\n", - dev->name, dev->irq); -#endif - dev->irq = 0; - } else { -#ifdef DEBUG_CONFIG_INFO - printk(KERN_DEBUG - "%s: wavelan_config(): changing IRQ to %d\n", - dev->name, dev->irq); -#endif - psa_write(ioaddr, HACR_DEFAULT, - psaoff(0, psa_int_req_no), &irq_mask, 1); - /* update the Wavelan checksum */ - update_psa_checksum(dev, ioaddr, HACR_DEFAULT); - wv_hacr_reset(ioaddr); - } - } - - psa_read(ioaddr, HACR_DEFAULT, psaoff(0, psa_int_req_no), - &irq_mask, 1); - if ((irq = wv_psa_to_irq(irq_mask)) == -1) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_INFO - "%s: wavelan_config(): could not wavelan_map_irq(%d).\n", - dev->name, irq_mask); -#endif - err = -EAGAIN; - goto out; - } - - dev->irq = irq; - - dev->mem_start = 0x0000; - dev->mem_end = 0x0000; - dev->if_port = 0; - - /* Initialize device structures */ - memset(netdev_priv(dev), 0, sizeof(net_local)); - lp = netdev_priv(dev); - - /* Back link to the device structure. */ - lp->dev = dev; - /* Add the device at the beginning of the linked list. */ - lp->next = wavelan_list; - wavelan_list = lp; - - lp->hacr = HACR_DEFAULT; - - /* Multicast stuff */ - lp->promiscuous = 0; - lp->mc_count = 0; - - /* Init spinlock */ - spin_lock_init(&lp->spinlock); - - dev->netdev_ops = &wavelan_netdev_ops; - dev->watchdog_timeo = WATCHDOG_JIFFIES; - dev->wireless_handlers = &wavelan_handler_def; - lp->wireless_data.spy_data = &lp->spy_data; - dev->wireless_data = &lp->wireless_data; - - dev->mtu = WAVELAN_MTU; - - /* Display nice information. */ - wv_init_info(dev); - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: <-wavelan_config()\n", dev->name); -#endif - return 0; -out: - release_region(ioaddr, sizeof(ha_t)); - return err; -} - -/*------------------------------------------------------------------*/ -/* - * Check for a network adaptor of this type. Return '0' iff one - * exists. There seem to be different interpretations of - * the initial value of dev->base_addr. - * We follow the example in drivers/net/ne.c. - * (called in "Space.c") - */ -struct net_device * __init wavelan_probe(int unit) -{ - struct net_device *dev; - short base_addr; - int def_irq; - int i; - int r = 0; - - /* compile-time check the sizes of structures */ - BUILD_BUG_ON(sizeof(psa_t) != PSA_SIZE); - BUILD_BUG_ON(sizeof(mmw_t) != MMW_SIZE); - BUILD_BUG_ON(sizeof(mmr_t) != MMR_SIZE); - BUILD_BUG_ON(sizeof(ha_t) != HA_SIZE); - - dev = alloc_etherdev(sizeof(net_local)); - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - base_addr = dev->base_addr; - def_irq = dev->irq; - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG - "%s: ->wavelan_probe(dev=%p (base_addr=0x%x))\n", - dev->name, dev, (unsigned int) dev->base_addr); -#endif - - /* Don't probe at all. */ - if (base_addr < 0) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_WARNING - "%s: wavelan_probe(): invalid base address\n", - dev->name); -#endif - r = -ENXIO; - } else if (base_addr > 0x100) { /* Check a single specified location. */ - r = wavelan_config(dev, base_addr); -#ifdef DEBUG_CONFIG_INFO - if (r != 0) - printk(KERN_DEBUG - "%s: wavelan_probe(): no device at specified base address (0x%X) or address already in use\n", - dev->name, base_addr); -#endif - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: <-wavelan_probe()\n", dev->name); -#endif - } else { /* Scan all possible addresses of the WaveLAN hardware. */ - for (i = 0; i < ARRAY_SIZE(iobase); i++) { - dev->irq = def_irq; - if (wavelan_config(dev, iobase[i]) == 0) { -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG - "%s: <-wavelan_probe()\n", - dev->name); -#endif - break; - } - } - if (i == ARRAY_SIZE(iobase)) - r = -ENODEV; - } - if (r) - goto out; - r = register_netdev(dev); - if (r) - goto out1; - return dev; -out1: - release_region(dev->base_addr, sizeof(ha_t)); - wavelan_list = wavelan_list->next; -out: - free_netdev(dev); - return ERR_PTR(r); -} - -/****************************** MODULE ******************************/ -/* - * Module entry point: insertion and removal - */ - -#ifdef MODULE -/*------------------------------------------------------------------*/ -/* - * Insertion of the module - * I'm now quite proud of the multi-device support. - */ -int __init init_module(void) -{ - int ret = -EIO; /* Return error if no cards found */ - int i; - -#ifdef DEBUG_MODULE_TRACE - printk(KERN_DEBUG "-> init_module()\n"); -#endif - - /* If probing is asked */ - if (io[0] == 0) { -#ifdef DEBUG_CONFIG_ERROR - printk(KERN_WARNING - "WaveLAN init_module(): doing device probing (bad !)\n"); - printk(KERN_WARNING - "Specify base addresses while loading module to correct the problem\n"); -#endif - - /* Copy the basic set of address to be probed. */ - for (i = 0; i < ARRAY_SIZE(iobase); i++) - io[i] = iobase[i]; - } - - - /* Loop on all possible base addresses. */ - for (i = 0; i < ARRAY_SIZE(io) && io[i] != 0; i++) { - struct net_device *dev = alloc_etherdev(sizeof(net_local)); - if (!dev) - break; - if (name[i]) - strcpy(dev->name, name[i]); /* Copy name */ - dev->base_addr = io[i]; - dev->irq = irq[i]; - - /* Check if there is something at this base address. */ - if (wavelan_config(dev, io[i]) == 0) { - if (register_netdev(dev) != 0) { - release_region(dev->base_addr, sizeof(ha_t)); - wavelan_list = wavelan_list->next; - } else { - ret = 0; - continue; - } - } - free_netdev(dev); - } - -#ifdef DEBUG_CONFIG_ERROR - if (!wavelan_list) - printk(KERN_WARNING - "WaveLAN init_module(): no device found\n"); -#endif - -#ifdef DEBUG_MODULE_TRACE - printk(KERN_DEBUG "<- init_module()\n"); -#endif - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Removal of the module - */ -void cleanup_module(void) -{ -#ifdef DEBUG_MODULE_TRACE - printk(KERN_DEBUG "-> cleanup_module()\n"); -#endif - - /* Loop on all devices and release them. */ - while (wavelan_list) { - struct net_device *dev = wavelan_list->dev; - -#ifdef DEBUG_CONFIG_INFO - printk(KERN_DEBUG - "%s: cleanup_module(): removing device at 0x%x\n", - dev->name, (unsigned int) dev); -#endif - unregister_netdev(dev); - - release_region(dev->base_addr, sizeof(ha_t)); - wavelan_list = wavelan_list->next; - - free_netdev(dev); - } - -#ifdef DEBUG_MODULE_TRACE - printk(KERN_DEBUG "<- cleanup_module()\n"); -#endif -} -#endif /* MODULE */ -MODULE_LICENSE("GPL"); - -/* - * This software may only be used and distributed - * according to the terms of the GNU General Public License. - * - * This software was developed as a component of the - * Linux operating system. - * It is based on other device drivers and information - * either written or supplied by: - * Ajay Bakre (bakre@paul.rutgers.edu), - * Donald Becker (becker@scyld.com), - * Loeke Brederveld (Loeke.Brederveld@Utrecht.NCR.com), - * Anders Klemets (klemets@it.kth.se), - * Vladimir V. Kolpakov (w@stier.koenig.ru), - * Marc Meertens (Marc.Meertens@Utrecht.NCR.com), - * Pauline Middelink (middelin@polyware.iaf.nl), - * Robert Morris (rtm@das.harvard.edu), - * Jean Tourrilhes (jt@hplb.hpl.hp.com), - * Girish Welling (welling@paul.rutgers.edu), - * - * Thanks go also to: - * James Ashton (jaa101@syseng.anu.edu.au), - * Alan Cox (alan@lxorguk.ukuu.org.uk), - * Allan Creighton (allanc@cs.usyd.edu.au), - * Matthew Geier (matthew@cs.usyd.edu.au), - * Remo di Giovanni (remo@cs.usyd.edu.au), - * Eckhard Grah (grah@wrcs1.urz.uni-wuppertal.de), - * Vipul Gupta (vgupta@cs.binghamton.edu), - * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM), - * Tim Nicholson (tim@cs.usyd.edu.au), - * Ian Parkin (ian@cs.usyd.edu.au), - * John Rosenberg (johnr@cs.usyd.edu.au), - * George Rossi (george@phm.gov.au), - * Arthur Scott (arthur@cs.usyd.edu.au), - * Peter Storey, - * for their assistance and advice. - * - * Please send bug reports, updates, comments to: - * - * Bruce Janson Email: bruce@cs.usyd.edu.au - * Basser Department of Computer Science Phone: +61-2-9351-3423 - * University of Sydney, N.S.W., 2006, AUSTRALIA Fax: +61-2-9351-3838 - */ diff --git a/drivers/net/wireless/wavelan.h b/drivers/net/wireless/wavelan.h deleted file mode 100644 index 9ab360558ffd..000000000000 --- a/drivers/net/wireless/wavelan.h +++ /dev/null @@ -1,370 +0,0 @@ -/* - * WaveLAN ISA driver - * - * Jean II - HPLB '96 - * - * Reorganisation and extension of the driver. - * Original copyright follows. See wavelan.p.h for details. - * - * This file contains the declarations for the WaveLAN hardware. Note that - * the WaveLAN ISA includes a i82586 controller (see definitions in - * file i82586.h). - * - * The main difference between the ISA hardware and the PCMCIA one is - * the Ethernet controller (i82586 instead of i82593). - * The i82586 allows multiple transmit buffers. The PSA needs to be accessed - * through the host interface. - */ - -#ifndef _WAVELAN_H -#define _WAVELAN_H - -/************************** MAGIC NUMBERS ***************************/ - -/* Detection of the WaveLAN card is done by reading the MAC - * address from the card and checking it. If you have a non-AT&T - * product (OEM, like DEC RoamAbout, Digital Ocean, or Epson), - * you might need to modify this part to accommodate your hardware. - */ -static const char MAC_ADDRESSES[][3] = -{ - { 0x08, 0x00, 0x0E }, /* AT&T WaveLAN (standard) & DEC RoamAbout */ - { 0x08, 0x00, 0x6A }, /* AT&T WaveLAN (alternate) */ - { 0x00, 0x00, 0xE1 }, /* Hitachi Wavelan */ - { 0x00, 0x60, 0x1D } /* Lucent Wavelan (another one) */ - /* Add your card here and send me the patch! */ -}; - -#define WAVELAN_ADDR_SIZE 6 /* Size of a MAC address */ - -#define WAVELAN_MTU 1500 /* Maximum size of WaveLAN packet */ - -#define MAXDATAZ (WAVELAN_ADDR_SIZE + WAVELAN_ADDR_SIZE + 2 + WAVELAN_MTU) - -/* - * Constants used to convert channels to frequencies - */ - -/* Frequency available in the 2.0 modem, in units of 250 kHz - * (as read in the offset register of the dac area). - * Used to map channel numbers used by `wfreqsel' to frequencies - */ -static const short channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8, - 0xD0, 0xF0, 0xF8, 0x150 }; - -/* Frequencies of the 1.0 modem (fixed frequencies). - * Use to map the PSA `subband' to a frequency - * Note : all frequencies apart from the first one need to be multiplied by 10 - */ -static const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 }; - - - -/*************************** PC INTERFACE ****************************/ - -/* - * Host Adaptor structure. - * (base is board port address). - */ -typedef union hacs_u hacs_u; -union hacs_u -{ - unsigned short hu_command; /* Command register */ -#define HACR_RESET 0x0001 /* Reset board */ -#define HACR_CA 0x0002 /* Set Channel Attention for 82586 */ -#define HACR_16BITS 0x0004 /* 16-bit operation (0 => 8bits) */ -#define HACR_OUT0 0x0008 /* General purpose output pin 0 */ - /* not used - must be 1 */ -#define HACR_OUT1 0x0010 /* General purpose output pin 1 */ - /* not used - must be 1 */ -#define HACR_82586_INT_ENABLE 0x0020 /* Enable 82586 interrupts */ -#define HACR_MMC_INT_ENABLE 0x0040 /* Enable MMC interrupts */ -#define HACR_INTR_CLR_ENABLE 0x0080 /* Enable interrupt status read/clear */ - unsigned short hu_status; /* Status Register */ -#define HASR_82586_INTR 0x0001 /* Interrupt request from 82586 */ -#define HASR_MMC_INTR 0x0002 /* Interrupt request from MMC */ -#define HASR_MMC_BUSY 0x0004 /* MMC busy indication */ -#define HASR_PSA_BUSY 0x0008 /* LAN parameter storage area busy */ -} __attribute__ ((packed)); - -typedef struct ha_t ha_t; -struct ha_t -{ - hacs_u ha_cs; /* Command and status registers */ -#define ha_command ha_cs.hu_command -#define ha_status ha_cs.hu_status - unsigned short ha_mmcr; /* Modem Management Ctrl Register */ - unsigned short ha_pior0; /* Program I/O Address Register Port 0 */ - unsigned short ha_piop0; /* Program I/O Port 0 */ - unsigned short ha_pior1; /* Program I/O Address Register Port 1 */ - unsigned short ha_piop1; /* Program I/O Port 1 */ - unsigned short ha_pior2; /* Program I/O Address Register Port 2 */ - unsigned short ha_piop2; /* Program I/O Port 2 */ -}; - -#define HA_SIZE 16 - -#define hoff(p,f) (unsigned short)((void *)(&((ha_t *)((void *)0 + (p)))->f) - (void *)0) -#define HACR(p) hoff(p, ha_command) -#define HASR(p) hoff(p, ha_status) -#define MMCR(p) hoff(p, ha_mmcr) -#define PIOR0(p) hoff(p, ha_pior0) -#define PIOP0(p) hoff(p, ha_piop0) -#define PIOR1(p) hoff(p, ha_pior1) -#define PIOP1(p) hoff(p, ha_piop1) -#define PIOR2(p) hoff(p, ha_pior2) -#define PIOP2(p) hoff(p, ha_piop2) - -/* - * Program I/O Mode Register values. - */ -#define STATIC_PIO 0 /* Mode 1: static mode */ - /* RAM access ??? */ -#define AUTOINCR_PIO 1 /* Mode 2: auto increment mode */ - /* RAM access ??? */ -#define AUTODECR_PIO 2 /* Mode 3: auto decrement mode */ - /* RAM access ??? */ -#define PARAM_ACCESS_PIO 3 /* Mode 4: LAN parameter access mode */ - /* Parameter access. */ -#define PIO_MASK 3 /* register mask */ -#define PIOM(cmd,piono) ((u_short)cmd << 10 << (piono * 2)) - -#define HACR_DEFAULT (HACR_OUT0 | HACR_OUT1 | HACR_16BITS | PIOM(STATIC_PIO, 0) | PIOM(AUTOINCR_PIO, 1) | PIOM(PARAM_ACCESS_PIO, 2)) -#define HACR_INTRON (HACR_82586_INT_ENABLE | HACR_MMC_INT_ENABLE | HACR_INTR_CLR_ENABLE) - -/************************** MEMORY LAYOUT **************************/ - -/* - * Onboard 64 k RAM layout. - * (Offsets from 0x0000.) - */ -#define OFFSET_RU 0x0000 /* 75% memory */ -#define OFFSET_CU 0xC000 /* 25% memory */ -#define OFFSET_SCB (OFFSET_ISCP - sizeof(scb_t)) -#define OFFSET_ISCP (OFFSET_SCP - sizeof(iscp_t)) -#define OFFSET_SCP I82586_SCP_ADDR - -#define RXBLOCKZ (sizeof(fd_t) + sizeof(rbd_t) + MAXDATAZ) -#define TXBLOCKZ (sizeof(ac_tx_t) + sizeof(ac_nop_t) + sizeof(tbd_t) + MAXDATAZ) - -#define NRXBLOCKS ((OFFSET_CU - OFFSET_RU) / RXBLOCKZ) -#define NTXBLOCKS ((OFFSET_SCB - OFFSET_CU) / TXBLOCKZ) - -/********************** PARAMETER STORAGE AREA **********************/ - -/* - * Parameter Storage Area (PSA). - */ -typedef struct psa_t psa_t; -struct psa_t -{ - unsigned char psa_io_base_addr_1; /* [0x00] Base address 1 ??? */ - unsigned char psa_io_base_addr_2; /* [0x01] Base address 2 */ - unsigned char psa_io_base_addr_3; /* [0x02] Base address 3 */ - unsigned char psa_io_base_addr_4; /* [0x03] Base address 4 */ - unsigned char psa_rem_boot_addr_1; /* [0x04] Remote Boot Address 1 */ - unsigned char psa_rem_boot_addr_2; /* [0x05] Remote Boot Address 2 */ - unsigned char psa_rem_boot_addr_3; /* [0x06] Remote Boot Address 3 */ - unsigned char psa_holi_params; /* [0x07] HOst Lan Interface (HOLI) Parameters */ - unsigned char psa_int_req_no; /* [0x08] Interrupt Request Line */ - unsigned char psa_unused0[7]; /* [0x09-0x0F] unused */ - - unsigned char psa_univ_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x10-0x15] Universal (factory) MAC Address */ - unsigned char psa_local_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x16-1B] Local MAC Address */ - unsigned char psa_univ_local_sel; /* [0x1C] Universal Local Selection */ -#define PSA_UNIVERSAL 0 /* Universal (factory) */ -#define PSA_LOCAL 1 /* Local */ - unsigned char psa_comp_number; /* [0x1D] Compatibility Number: */ -#define PSA_COMP_PC_AT_915 0 /* PC-AT 915 MHz */ -#define PSA_COMP_PC_MC_915 1 /* PC-MC 915 MHz */ -#define PSA_COMP_PC_AT_2400 2 /* PC-AT 2.4 GHz */ -#define PSA_COMP_PC_MC_2400 3 /* PC-MC 2.4 GHz */ -#define PSA_COMP_PCMCIA_915 4 /* PCMCIA 915 MHz or 2.0 */ - unsigned char psa_thr_pre_set; /* [0x1E] Modem Threshold Preset */ - unsigned char psa_feature_select; /* [0x1F] Call code required (1=on) */ -#define PSA_FEATURE_CALL_CODE 0x01 /* Call code required (Japan) */ - unsigned char psa_subband; /* [0x20] Subband */ -#define PSA_SUBBAND_915 0 /* 915 MHz or 2.0 */ -#define PSA_SUBBAND_2425 1 /* 2425 MHz */ -#define PSA_SUBBAND_2460 2 /* 2460 MHz */ -#define PSA_SUBBAND_2484 3 /* 2484 MHz */ -#define PSA_SUBBAND_2430_5 4 /* 2430.5 MHz */ - unsigned char psa_quality_thr; /* [0x21] Modem Quality Threshold */ - unsigned char psa_mod_delay; /* [0x22] Modem Delay (?) (reserved) */ - unsigned char psa_nwid[2]; /* [0x23-0x24] Network ID */ - unsigned char psa_nwid_select; /* [0x25] Network ID Select On/Off */ - unsigned char psa_encryption_select; /* [0x26] Encryption On/Off */ - unsigned char psa_encryption_key[8]; /* [0x27-0x2E] Encryption Key */ - unsigned char psa_databus_width; /* [0x2F] AT bus width select 8/16 */ - unsigned char psa_call_code[8]; /* [0x30-0x37] (Japan) Call Code */ - unsigned char psa_nwid_prefix[2]; /* [0x38-0x39] Roaming domain */ - unsigned char psa_reserved[2]; /* [0x3A-0x3B] Reserved - fixed 00 */ - unsigned char psa_conf_status; /* [0x3C] Conf Status, bit 0=1:config*/ - unsigned char psa_crc[2]; /* [0x3D] CRC-16 over PSA */ - unsigned char psa_crc_status; /* [0x3F] CRC Valid Flag */ -}; - -#define PSA_SIZE 64 - -/* Calculate offset of a field in the above structure. - * Warning: only even addresses are used. */ -#define psaoff(p,f) ((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL)) - -/******************** MODEM MANAGEMENT INTERFACE ********************/ - -/* - * Modem Management Controller (MMC) write structure. - */ -typedef struct mmw_t mmw_t; -struct mmw_t -{ - unsigned char mmw_encr_key[8]; /* encryption key */ - unsigned char mmw_encr_enable; /* Enable or disable encryption. */ -#define MMW_ENCR_ENABLE_MODE 0x02 /* mode of security option */ -#define MMW_ENCR_ENABLE_EN 0x01 /* Enable security option. */ - unsigned char mmw_unused0[1]; /* unused */ - unsigned char mmw_des_io_invert; /* encryption option */ -#define MMW_DES_IO_INVERT_RES 0x0F /* reserved */ -#define MMW_DES_IO_INVERT_CTRL 0xF0 /* control (?) (set to 0) */ - unsigned char mmw_unused1[5]; /* unused */ - unsigned char mmw_loopt_sel; /* looptest selection */ -#define MMW_LOOPT_SEL_DIS_NWID 0x40 /* Disable NWID filtering. */ -#define MMW_LOOPT_SEL_INT 0x20 /* Activate Attention Request. */ -#define MMW_LOOPT_SEL_LS 0x10 /* looptest, no collision avoidance */ -#define MMW_LOOPT_SEL_LT3A 0x08 /* looptest 3a */ -#define MMW_LOOPT_SEL_LT3B 0x04 /* looptest 3b */ -#define MMW_LOOPT_SEL_LT3C 0x02 /* looptest 3c */ -#define MMW_LOOPT_SEL_LT3D 0x01 /* looptest 3d */ - unsigned char mmw_jabber_enable; /* jabber timer enable */ - /* Abort transmissions > 200 ms */ - unsigned char mmw_freeze; /* freeze or unfreeze signal level */ - /* 0 : signal level & qual updated for every new message, 1 : frozen */ - unsigned char mmw_anten_sel; /* antenna selection */ -#define MMW_ANTEN_SEL_SEL 0x01 /* direct antenna selection */ -#define MMW_ANTEN_SEL_ALG_EN 0x02 /* antenna selection algo. enable */ - unsigned char mmw_ifs; /* inter frame spacing */ - /* min time between transmission in bit periods (.5 us) - bit 0 ignored */ - unsigned char mmw_mod_delay; /* modem delay (synchro) */ - unsigned char mmw_jam_time; /* jamming time (after collision) */ - unsigned char mmw_unused2[1]; /* unused */ - unsigned char mmw_thr_pre_set; /* level threshold preset */ - /* Discard all packet with signal < this value (4) */ - unsigned char mmw_decay_prm; /* decay parameters */ - unsigned char mmw_decay_updat_prm; /* decay update parameters */ - unsigned char mmw_quality_thr; /* quality (z-quotient) threshold */ - /* Discard all packet with quality < this value (3) */ - unsigned char mmw_netw_id_l; /* NWID low order byte */ - unsigned char mmw_netw_id_h; /* NWID high order byte */ - /* Network ID or Domain : create virtual net on the air */ - - /* 2.0 Hardware extension - frequency selection support */ - unsigned char mmw_mode_select; /* for analog tests (set to 0) */ - unsigned char mmw_unused3[1]; /* unused */ - unsigned char mmw_fee_ctrl; /* frequency EEPROM control */ -#define MMW_FEE_CTRL_PRE 0x10 /* Enable protected instructions. */ -#define MMW_FEE_CTRL_DWLD 0x08 /* Download EEPROM to mmc. */ -#define MMW_FEE_CTRL_CMD 0x07 /* EEPROM commands: */ -#define MMW_FEE_CTRL_READ 0x06 /* Read */ -#define MMW_FEE_CTRL_WREN 0x04 /* Write enable */ -#define MMW_FEE_CTRL_WRITE 0x05 /* Write data to address. */ -#define MMW_FEE_CTRL_WRALL 0x04 /* Write data to all addresses. */ -#define MMW_FEE_CTRL_WDS 0x04 /* Write disable */ -#define MMW_FEE_CTRL_PRREAD 0x16 /* Read addr from protect register */ -#define MMW_FEE_CTRL_PREN 0x14 /* Protect register enable */ -#define MMW_FEE_CTRL_PRCLEAR 0x17 /* Unprotect all registers. */ -#define MMW_FEE_CTRL_PRWRITE 0x15 /* Write address in protect register */ -#define MMW_FEE_CTRL_PRDS 0x14 /* Protect register disable */ - /* Never issue the PRDS command: it's irreversible! */ - - unsigned char mmw_fee_addr; /* EEPROM address */ -#define MMW_FEE_ADDR_CHANNEL 0xF0 /* Select the channel. */ -#define MMW_FEE_ADDR_OFFSET 0x0F /* Offset in channel data */ -#define MMW_FEE_ADDR_EN 0xC0 /* FEE_CTRL enable operations */ -#define MMW_FEE_ADDR_DS 0x00 /* FEE_CTRL disable operations */ -#define MMW_FEE_ADDR_ALL 0x40 /* FEE_CTRL all operations */ -#define MMW_FEE_ADDR_CLEAR 0xFF /* FEE_CTRL clear operations */ - - unsigned char mmw_fee_data_l; /* Write data to EEPROM. */ - unsigned char mmw_fee_data_h; /* high octet */ - unsigned char mmw_ext_ant; /* Setting for external antenna */ -#define MMW_EXT_ANT_EXTANT 0x01 /* Select external antenna */ -#define MMW_EXT_ANT_POL 0x02 /* Polarity of the antenna */ -#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */ -#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */ -#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */ -} __attribute__ ((packed)); - -#define MMW_SIZE 37 - -#define mmwoff(p,f) (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0) - -/* - * Modem Management Controller (MMC) read structure. - */ -typedef struct mmr_t mmr_t; -struct mmr_t -{ - unsigned char mmr_unused0[8]; /* unused */ - unsigned char mmr_des_status; /* encryption status */ - unsigned char mmr_des_avail; /* encryption available (0x55 read) */ -#define MMR_DES_AVAIL_DES 0x55 /* DES available */ -#define MMR_DES_AVAIL_AES 0x33 /* AES (AT&T) available */ - unsigned char mmr_des_io_invert; /* des I/O invert register */ - unsigned char mmr_unused1[5]; /* unused */ - unsigned char mmr_dce_status; /* DCE status */ -#define MMR_DCE_STATUS_RX_BUSY 0x01 /* receiver busy */ -#define MMR_DCE_STATUS_LOOPT_IND 0x02 /* loop test indicated */ -#define MMR_DCE_STATUS_TX_BUSY 0x04 /* transmitter on */ -#define MMR_DCE_STATUS_JBR_EXPIRED 0x08 /* jabber timer expired */ -#define MMR_DCE_STATUS 0x0F /* mask to get the bits */ - unsigned char mmr_dsp_id; /* DSP ID (AA = Daedalus rev A) */ - unsigned char mmr_unused2[2]; /* unused */ - unsigned char mmr_correct_nwid_l; /* # of correct NWIDs rxd (low) */ - unsigned char mmr_correct_nwid_h; /* # of correct NWIDs rxd (high) */ - /* Warning: read high-order octet first! */ - unsigned char mmr_wrong_nwid_l; /* # of wrong NWIDs rxd (low) */ - unsigned char mmr_wrong_nwid_h; /* # of wrong NWIDs rxd (high) */ - unsigned char mmr_thr_pre_set; /* level threshold preset */ -#define MMR_THR_PRE_SET 0x3F /* level threshold preset */ -#define MMR_THR_PRE_SET_CUR 0x80 /* Current signal above it */ - unsigned char mmr_signal_lvl; /* signal level */ -#define MMR_SIGNAL_LVL 0x3F /* signal level */ -#define MMR_SIGNAL_LVL_VALID 0x80 /* Updated since last read */ - unsigned char mmr_silence_lvl; /* silence level (noise) */ -#define MMR_SILENCE_LVL 0x3F /* silence level */ -#define MMR_SILENCE_LVL_VALID 0x80 /* Updated since last read */ - unsigned char mmr_sgnl_qual; /* signal quality */ -#define MMR_SGNL_QUAL 0x0F /* signal quality */ -#define MMR_SGNL_QUAL_ANT 0x80 /* current antenna used */ - unsigned char mmr_netw_id_l; /* NWID low order byte (?) */ - unsigned char mmr_unused3[3]; /* unused */ - - /* 2.0 Hardware extension - frequency selection support */ - unsigned char mmr_fee_status; /* Status of frequency EEPROM */ -#define MMR_FEE_STATUS_ID 0xF0 /* Modem revision ID */ -#define MMR_FEE_STATUS_DWLD 0x08 /* Download in progress */ -#define MMR_FEE_STATUS_BUSY 0x04 /* EEPROM busy */ - unsigned char mmr_unused4[1]; /* unused */ - unsigned char mmr_fee_data_l; /* Read data from EEPROM (low) */ - unsigned char mmr_fee_data_h; /* Read data from EEPROM (high) */ -} __attribute__ ((packed)); - -#define MMR_SIZE 36 - -#define mmroff(p,f) (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0) - -/* Make the two above structures one */ -typedef union mm_t -{ - struct mmw_t w; /* Write to the mmc */ - struct mmr_t r; /* Read from the mmc */ -} mm_t; - -#endif /* _WAVELAN_H */ - -/* - * This software may only be used and distributed - * according to the terms of the GNU General Public License. - * - * For more details, see wavelan.c. - */ diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h deleted file mode 100644 index dbe8de6e5f52..000000000000 --- a/drivers/net/wireless/wavelan.p.h +++ /dev/null @@ -1,696 +0,0 @@ -/* - * WaveLAN ISA driver - * - * Jean II - HPLB '96 - * - * Reorganisation and extension of the driver. - * - * This file contains all definitions and declarations necessary for the - * WaveLAN ISA driver. This file is a private header, so it should - * be included only in wavelan.c! - */ - -#ifndef WAVELAN_P_H -#define WAVELAN_P_H - -/************************** DOCUMENTATION ***************************/ -/* - * This driver provides a Linux interface to the WaveLAN ISA hardware. - * The WaveLAN is a product of Lucent (http://www.wavelan.com/). - * This division was formerly part of NCR and then AT&T. - * WaveLANs are also distributed by DEC (RoamAbout DS) and Digital Ocean. - * - * To learn how to use this driver, read the NET3 HOWTO. - * If you want to exploit the many other functionalities, read the comments - * in the code. - * - * This driver is the result of the effort of many people (see below). - */ - -/* ------------------------ SPECIFIC NOTES ------------------------ */ -/* - * Web page - * -------- - * I try to maintain a web page with the Wireless LAN Howto at : - * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html - * - * SMP - * --- - * We now are SMP compliant (I eventually fixed the remaining bugs). - * The driver has been tested on a dual P6-150 and survived my usual - * set of torture tests. - * Anyway, I spent enough time chasing interrupt re-entrancy during - * errors or reconfigure, and I designed the locked/unlocked sections - * of the driver with great care, and with the recent addition of - * the spinlock (thanks to the new API), we should be quite close to - * the truth. - * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast), - * but better safe than sorry (especially at 2 Mb/s ;-). - * - * I have also looked into disabling only our interrupt on the card - * (via HACR) instead of all interrupts in the processor (via cli), - * so that other driver are not impacted, and it look like it's - * possible, but it's very tricky to do right (full of races). As - * the gain would be mostly for SMP systems, it can wait... - * - * Debugging and options - * --------------------- - * You will find below a set of '#define" allowing a very fine control - * on the driver behaviour and the debug messages printed. - * The main options are : - * o SET_PSA_CRC, to have your card correctly recognised by - * an access point and the Point-to-Point diagnostic tool. - * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom) - * (otherwise we always start afresh with some defaults) - * - * wavelan.o is too darned big - * --------------------------- - * That's true! There is a very simple way to reduce the driver - * object by 33%! Comment out the following line: - * #include <linux/wireless.h> - * Other compile options can also reduce the size of it... - * - * MAC address and hardware detection: - * ----------------------------------- - * The detection code for the WaveLAN checks that the first three - * octets of the MAC address fit the company code. This type of - * detection works well for AT&T cards (because the AT&T code is - * hardcoded in wavelan.h), but of course will fail for other - * manufacturers. - * - * If you are sure that your card is derived from the WaveLAN, - * here is the way to configure it: - * 1) Get your MAC address - * a) With your card utilities (wfreqsel, instconf, etc.) - * b) With the driver: - * o compile the kernel with DEBUG_CONFIG_INFO enabled - * o Boot and look the card messages - * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h) - * 3) Compile and verify - * 4) Send me the MAC code. I will include it in the next version. - * - */ - -/* --------------------- WIRELESS EXTENSIONS --------------------- */ -/* - * This driver is the first to support "wireless extensions". - * This set of extensions provides a standard way to control the wireless - * characteristics of the hardware. Applications such as mobile IP may - * take advantage of it. - * - * It might be a good idea as well to fetch the wireless tools to - * configure the device and play a bit. - */ - -/* ---------------------------- FILES ---------------------------- */ -/* - * wavelan.c: actual code for the driver: C functions - * - * wavelan.p.h: private header: local types and variables for driver - * - * wavelan.h: description of the hardware interface and structs - * - * i82586.h: description of the Ethernet controller - */ - -/* --------------------------- HISTORY --------------------------- */ -/* - * This is based on information in the drivers' headers. It may not be - * accurate, and I guarantee only my best effort. - * - * The history of the WaveLAN drivers is as complicated as the history of - * the WaveLAN itself (NCR -> AT&T -> Lucent). - * - * It all started with Anders Klemets <klemets@paul.rutgers.edu> - * writing a WaveLAN ISA driver for the Mach microkernel. Girish - * Welling <welling@paul.rutgers.edu> had also worked on it. - * Keith Moore modified this for the PCMCIA hardware. - * - * Robert Morris <rtm@das.harvard.edu> ported these two drivers to BSDI - * and added specific PCMCIA support (there is currently no equivalent - * of the PCMCIA package under BSD). - * - * Jim Binkley <jrb@cs.pdx.edu> ported both BSDI drivers to FreeBSD. - * - * Bruce Janson <bruce@cs.usyd.edu.au> ported the BSDI ISA driver to Linux. - * - * Anthony D. Joseph <adj@lcs.mit.edu> started to modify Bruce's driver - * (with help of the BSDI PCMCIA driver) for PCMCIA. - * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished this work. - * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start - * 2.00 cards correctly (2.4 GHz with frequency selection). - * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his - * PCMCIA package (and bug corrections). - * - * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some - * patches to the PCMCIA driver. Later, I added code in the ISA driver - * for Wireless Extensions and full support of frequency selection - * cards. Then, I did the same to the PCMCIA driver, and did some - * reorganisation. Finally, I came back to the ISA driver to - * upgrade it at the same level as the PCMCIA one and reorganise - * the code. - * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me - * much needed information on the WaveLAN hardware. - */ - -/* The original copyrights and literature mention others' names and - * credits. I don't know what their part in this development was. - */ - -/* By the way, for the copyright and legal stuff: - * almost everybody wrote code under the GNU or BSD license (or similar), - * and want their original copyright to remain somewhere in the - * code (for myself, I go with the GPL). - * Nobody wants to take responsibility for anything, except the fame. - */ - -/* --------------------------- CREDITS --------------------------- */ -/* - * This software was developed as a component of the - * Linux operating system. - * It is based on other device drivers and information - * either written or supplied by: - * Ajay Bakre <bakre@paul.rutgers.edu>, - * Donald Becker <becker@cesdis.gsfc.nasa.gov>, - * Loeke Brederveld <Loeke.Brederveld@Utrecht.NCR.com>, - * Brent Elphick <belphick@uwaterloo.ca>, - * Anders Klemets <klemets@it.kth.se>, - * Vladimir V. Kolpakov <w@stier.koenig.ru>, - * Marc Meertens <Marc.Meertens@Utrecht.NCR.com>, - * Pauline Middelink <middelin@polyware.iaf.nl>, - * Robert Morris <rtm@das.harvard.edu>, - * Jean Tourrilhes <jt@hpl.hp.com>, - * Girish Welling <welling@paul.rutgers.edu>, - * Clark Woodworth <clark@hiway1.exit109.com> - * Yongguang Zhang <ygz@isl.hrl.hac.com> - * - * Thanks go also to: - * James Ashton <jaa101@syseng.anu.edu.au>, - * Alan Cox <alan@lxorguk.ukuu.org.uk>, - * Allan Creighton <allanc@cs.usyd.edu.au>, - * Matthew Geier <matthew@cs.usyd.edu.au>, - * Remo di Giovanni <remo@cs.usyd.edu.au>, - * Eckhard Grah <grah@wrcs1.urz.uni-wuppertal.de>, - * Vipul Gupta <vgupta@cs.binghamton.edu>, - * Mark Hagan <mhagan@wtcpost.daytonoh.NCR.COM>, - * Tim Nicholson <tim@cs.usyd.edu.au>, - * Ian Parkin <ian@cs.usyd.edu.au>, - * John Rosenberg <johnr@cs.usyd.edu.au>, - * George Rossi <george@phm.gov.au>, - * Arthur Scott <arthur@cs.usyd.edu.au>, - * Stanislav Sinyagin <stas@isf.ru> - * and Peter Storey for their assistance and advice. - * - * Additional Credits: - * - * My development has been done initially under Debian 1.1 (Linux 2.0.x) - * and now under Debian 2.2, initially with an HP Vectra XP/60, and now - * an HP Vectra XP/90. - * - */ - -/* ------------------------- IMPROVEMENTS ------------------------- */ -/* - * I proudly present: - * - * Changes made in first pre-release: - * ---------------------------------- - * - reorganisation of the code, function name change - * - creation of private header (wavelan.p.h) - * - reorganised debug messages - * - more comments, history, etc. - * - mmc_init: configure the PSA if not done - * - mmc_init: correct default value of level threshold for PCMCIA - * - mmc_init: 2.00 detection better code for 2.00 initialization - * - better info at startup - * - IRQ setting (note: this setting is permanent) - * - watchdog: change strategy (and solve module removal problems) - * - add wireless extensions (ioctl and get_wireless_stats) - * get/set nwid/frequency on fly, info for /proc/net/wireless - * - more wireless extensions: SETSPY and GETSPY - * - make wireless extensions optional - * - private ioctl to set/get quality and level threshold, histogram - * - remove /proc/net/wavelan - * - suppress useless stuff from lp (net_local) - * - kernel 2.1 support (copy_to/from_user instead of memcpy_to/fromfs) - * - add message level (debug stuff in /var/adm/debug and errors not - * displayed at console and still in /var/adm/messages) - * - multi device support - * - start fixing the probe (init code) - * - more inlines - * - man page - * - many other minor details and cleanups - * - * Changes made in second pre-release: - * ----------------------------------- - * - clean up init code (probe and module init) - * - better multiple device support (module) - * - name assignment (module) - * - * Changes made in third pre-release: - * ---------------------------------- - * - be more conservative on timers - * - preliminary support for multicast (I still lack some details) - * - * Changes made in fourth pre-release: - * ----------------------------------- - * - multicast (revisited and finished) - * - avoid reset in set_multicast_list (a really big hack) - * if somebody could apply this code for other i82586 based drivers - * - share onboard memory 75% RU and 25% CU (instead of 50/50) - * - * Changes made for release in 2.1.15: - * ----------------------------------- - * - change the detection code for multi manufacturer code support - * - * Changes made for release in 2.1.17: - * ----------------------------------- - * - update to wireless extensions changes - * - silly bug in card initial configuration (psa_conf_status) - * - * Changes made for release in 2.1.27 & 2.0.30: - * -------------------------------------------- - * - small bug in debug code (probably not the last one...) - * - remove extern keyword for wavelan_probe() - * - level threshold is now a standard wireless extension (version 4 !) - * - modules parameters types (new module interface) - * - * Changes made for release in 2.1.36: - * ----------------------------------- - * - byte count stats (courtesy of David Hinds) - * - remove dev_tint stuff (courtesy of David Hinds) - * - encryption setting from Brent Elphick (thanks a lot!) - * - 'ioaddr' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin) - * - * Other changes (not by me) : - * ------------------------- - * - Spelling and gramar "rectification". - * - * Changes made for release in 2.0.37 & 2.2.2 : - * ------------------------------------------ - * - Correct status in /proc/net/wireless - * - Set PSA CRC to make PtP diagnostic tool happy (Bob Gray) - * - Module init code don't fail if we found at least one card in - * the address list (Karlis Peisenieks) - * - Missing parenthesis (Christopher Peterson) - * - Correct i82586 configuration parameters - * - Encryption initialisation bug (Robert McCormack) - * - New mac addresses detected in the probe - * - Increase watchdog for busy environments - * - * Changes made for release in 2.0.38 & 2.2.7 : - * ------------------------------------------ - * - Correct the reception logic to better report errors and avoid - * sending bogus packet up the stack - * - Delay RU config to avoid corrupting first received packet - * - Change config completion code (to actually check something) - * - Avoid reading out of bound in skbuf to transmit - * - Rectify a lot of (useless) debugging code - * - Change the way to `#ifdef SET_PSA_CRC' - * - * Changes made for release in 2.2.11 & 2.3.13 : - * ------------------------------------------- - * - Change e-mail and web page addresses - * - Watchdog timer is now correctly expressed in HZ, not in jiffies - * - Add channel number to the list of frequencies in range - * - Add the (short) list of bit-rates in range - * - Developp a new sensitivity... (sens.value & sens.fixed) - * - * Changes made for release in 2.2.14 & 2.3.23 : - * ------------------------------------------- - * - Fix check for root permission (break instead of exit) - * - New nwid & encoding setting (Wireless Extension 9) - * - * Changes made for release in 2.3.49 : - * ---------------------------------- - * - Indentation reformating (Alan) - * - Update to new network API (softnet - 2.3.43) : - * o replace dev->tbusy (Alan) - * o replace dev->tstart (Alan) - * o remove dev->interrupt (Alan) - * o add SMP locking via spinlock in splxx (me) - * o add spinlock in interrupt handler (me) - * o use kernel watchdog instead of ours (me) - * o increase watchdog timeout (kernel is more sensitive) (me) - * o verify that all the changes make sense and work (me) - * - Fixup a potential gotcha when reconfiguring and thighten a bit - * the interactions with Tx queue. - * - * Changes made for release in 2.4.0 : - * --------------------------------- - * - Fix spinlock stupid bugs that I left in. The driver is now SMP - * compliant and doesn't lockup at startup. - * - * Changes made for release in 2.5.2 : - * --------------------------------- - * - Use new driver API for Wireless Extensions : - * o got rid of wavelan_ioctl() - * o use a bunch of iw_handler instead - * - * Changes made for release in 2.5.35 : - * ---------------------------------- - * - Set dev->trans_start to avoid filling the logs - * - Handle better spurious/bogus interrupt - * - Avoid deadlocks in mmc_out()/mmc_in() - * - * Wishes & dreams: - * ---------------- - * - roaming (see Pcmcia driver) - */ - -/***************************** INCLUDES *****************************/ - -#include <linux/module.h> - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/stat.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/bitops.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/uaccess.h> -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/slab.h> -#include <linux/timer.h> -#include <linux/init.h> - -#include <linux/wireless.h> /* Wireless extensions */ -#include <net/iw_handler.h> /* Wireless handlers */ - -/* WaveLAN declarations */ -#include "i82586.h" -#include "wavelan.h" - -/************************** DRIVER OPTIONS **************************/ -/* - * `#define' or `#undef' the following constant to change the behaviour - * of the driver... - */ -#undef SET_PSA_CRC /* Calculate and set the CRC on PSA (slower) */ -#define USE_PSA_CONFIG /* Use info from the PSA. */ -#undef EEPROM_IS_PROTECTED /* doesn't seem to be necessary */ -#define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical). */ -#undef SET_MAC_ADDRESS /* Experimental */ - -/* Warning: this stuff will slow down the driver. */ -#define WIRELESS_SPY /* Enable spying addresses. */ -#undef HISTOGRAM /* Enable histogram of signal level. */ - -/****************************** DEBUG ******************************/ - -#undef DEBUG_MODULE_TRACE /* module insertion/removal */ -#undef DEBUG_CALLBACK_TRACE /* calls made by Linux */ -#undef DEBUG_INTERRUPT_TRACE /* calls to handler */ -#undef DEBUG_INTERRUPT_INFO /* type of interrupt and so on */ -#define DEBUG_INTERRUPT_ERROR /* problems */ -#undef DEBUG_CONFIG_TRACE /* Trace the config functions. */ -#undef DEBUG_CONFIG_INFO /* what's going on */ -#define DEBUG_CONFIG_ERROR /* errors on configuration */ -#undef DEBUG_TX_TRACE /* transmission calls */ -#undef DEBUG_TX_INFO /* header of the transmitted packet */ -#undef DEBUG_TX_FAIL /* Normal failure conditions */ -#define DEBUG_TX_ERROR /* Unexpected conditions */ -#undef DEBUG_RX_TRACE /* transmission calls */ -#undef DEBUG_RX_INFO /* header of the received packet */ -#undef DEBUG_RX_FAIL /* Normal failure conditions */ -#define DEBUG_RX_ERROR /* Unexpected conditions */ - -#undef DEBUG_PACKET_DUMP /* Dump packet on the screen if defined to 32. */ -#undef DEBUG_IOCTL_TRACE /* misc. call by Linux */ -#undef DEBUG_IOCTL_INFO /* various debugging info */ -#define DEBUG_IOCTL_ERROR /* what's going wrong */ -#define DEBUG_BASIC_SHOW /* Show basic startup info. */ -#undef DEBUG_VERSION_SHOW /* Print version info. */ -#undef DEBUG_PSA_SHOW /* Dump PSA to screen. */ -#undef DEBUG_MMC_SHOW /* Dump mmc to screen. */ -#undef DEBUG_SHOW_UNUSED /* Show unused fields too. */ -#undef DEBUG_I82586_SHOW /* Show i82586 status. */ -#undef DEBUG_DEVICE_SHOW /* Show device parameters. */ - -/************************ CONSTANTS & MACROS ************************/ - -#ifdef DEBUG_VERSION_SHOW -static const char *version = "wavelan.c : v24 (SMP + wireless extensions) 11/12/01\n"; -#endif - -/* Watchdog temporisation */ -#define WATCHDOG_JIFFIES (512*HZ/100) - -/* ------------------------ PRIVATE IOCTL ------------------------ */ - -#define SIOCSIPQTHR SIOCIWFIRSTPRIV /* Set quality threshold */ -#define SIOCGIPQTHR SIOCIWFIRSTPRIV + 1 /* Get quality threshold */ - -#define SIOCSIPHISTO SIOCIWFIRSTPRIV + 2 /* Set histogram ranges */ -#define SIOCGIPHISTO SIOCIWFIRSTPRIV + 3 /* Get histogram values */ - -/****************************** TYPES ******************************/ - -/* Shortcuts */ -typedef struct iw_statistics iw_stats; -typedef struct iw_quality iw_qual; -typedef struct iw_freq iw_freq;typedef struct net_local net_local; -typedef struct timer_list timer_list; - -/* Basic types */ -typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */ - -/* - * Static specific data for the interface. - * - * For each network interface, Linux keeps data in two structures: "device" - * keeps the generic data (same format for everybody) and "net_local" keeps - * additional specific data. - */ -struct net_local -{ - net_local * next; /* linked list of the devices */ - struct net_device * dev; /* reverse link */ - spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ - int nresets; /* number of hardware resets */ - u_char reconfig_82586; /* We need to reconfigure the controller. */ - u_char promiscuous; /* promiscuous mode */ - int mc_count; /* number of multicast addresses */ - u_short hacr; /* current host interface state */ - - int tx_n_in_use; - u_short rx_head; - u_short rx_last; - u_short tx_first_free; - u_short tx_first_in_use; - - iw_stats wstats; /* Wireless-specific statistics */ - - struct iw_spy_data spy_data; - struct iw_public_data wireless_data; - -#ifdef HISTOGRAM - int his_number; /* number of intervals */ - u_char his_range[16]; /* boundaries of interval ]n-1; n] */ - u_long his_sum[16]; /* sum in interval */ -#endif /* HISTOGRAM */ -}; - -/**************************** PROTOTYPES ****************************/ - -/* ----------------------- MISC. SUBROUTINES ------------------------ */ -static u_char - wv_irq_to_psa(int); -static int - wv_psa_to_irq(u_char); -/* ------------------- HOST ADAPTER SUBROUTINES ------------------- */ -static inline u_short /* data */ - hasr_read(u_long); /* Read the host interface: base address */ -static inline void - hacr_write(u_long, /* Write to host interface: base address */ - u_short), /* data */ - hacr_write_slow(u_long, - u_short), - set_chan_attn(u_long, /* ioaddr */ - u_short), /* hacr */ - wv_hacr_reset(u_long), /* ioaddr */ - wv_16_off(u_long, /* ioaddr */ - u_short), /* hacr */ - wv_16_on(u_long, /* ioaddr */ - u_short), /* hacr */ - wv_ints_off(struct net_device *), - wv_ints_on(struct net_device *); -/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */ -static void - psa_read(u_long, /* Read the Parameter Storage Area. */ - u_short, /* hacr */ - int, /* offset in PSA */ - u_char *, /* buffer to fill */ - int), /* size to read */ - psa_write(u_long, /* Write to the PSA. */ - u_short, /* hacr */ - int, /* offset in PSA */ - u_char *, /* buffer in memory */ - int); /* length of buffer */ -static inline void - mmc_out(u_long, /* Write 1 byte to the Modem Manag Control. */ - u_short, - u_char), - mmc_write(u_long, /* Write n bytes to the MMC. */ - u_char, - u_char *, - int); -static inline u_char /* Read 1 byte from the MMC. */ - mmc_in(u_long, - u_short); -static inline void - mmc_read(u_long, /* Read n bytes from the MMC. */ - u_char, - u_char *, - int), - fee_wait(u_long, /* Wait for frequency EEPROM: base address */ - int, /* base delay to wait for */ - int); /* time to wait */ -static void - fee_read(u_long, /* Read the frequency EEPROM: base address */ - u_short, /* destination offset */ - u_short *, /* data buffer */ - int); /* number of registers */ -/* ---------------------- I82586 SUBROUTINES ----------------------- */ -static /*inline*/ void - obram_read(u_long, /* ioaddr */ - u_short, /* o */ - u_char *, /* b */ - int); /* n */ -static inline void - obram_write(u_long, /* ioaddr */ - u_short, /* o */ - u_char *, /* b */ - int); /* n */ -static void - wv_ack(struct net_device *); -static inline int - wv_synchronous_cmd(struct net_device *, - const char *), - wv_config_complete(struct net_device *, - u_long, - net_local *); -static int - wv_complete(struct net_device *, - u_long, - net_local *); -static inline void - wv_82586_reconfig(struct net_device *); -/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */ -#ifdef DEBUG_I82586_SHOW -static void - wv_scb_show(unsigned short); -#endif -static inline void - wv_init_info(struct net_device *); /* display startup info */ -/* ------------------- IOCTL, STATS & RECONFIG ------------------- */ -static iw_stats * - wavelan_get_wireless_stats(struct net_device *); -static void - wavelan_set_multicast_list(struct net_device *); -/* ----------------------- PACKET RECEPTION ----------------------- */ -static inline void - wv_packet_read(struct net_device *, /* Read a packet from a frame. */ - u_short, - int), - wv_receive(struct net_device *); /* Read all packets waiting. */ -/* --------------------- PACKET TRANSMISSION --------------------- */ -static inline int - wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer. */ - void *, - short); -static netdev_tx_t - wavelan_packet_xmit(struct sk_buff *, /* Send a packet. */ - struct net_device *); -/* -------------------- HARDWARE CONFIGURATION -------------------- */ -static inline int - wv_mmc_init(struct net_device *), /* Initialize the modem. */ - wv_ru_start(struct net_device *), /* Start the i82586 receiver unit. */ - wv_cu_start(struct net_device *), /* Start the i82586 command unit. */ - wv_82586_start(struct net_device *); /* Start the i82586. */ -static void - wv_82586_config(struct net_device *); /* Configure the i82586. */ -static inline void - wv_82586_stop(struct net_device *); -static int - wv_hw_reset(struct net_device *), /* Reset the WaveLAN hardware. */ - wv_check_ioaddr(u_long, /* ioaddr */ - u_char *); /* mac address (read) */ -/* ---------------------- INTERRUPT HANDLING ---------------------- */ -static irqreturn_t - wavelan_interrupt(int, /* interrupt handler */ - void *); -static void - wavelan_watchdog(struct net_device *); /* transmission watchdog */ -/* ------------------- CONFIGURATION CALLBACKS ------------------- */ -static int - wavelan_open(struct net_device *), /* Open the device. */ - wavelan_close(struct net_device *), /* Close the device. */ - wavelan_config(struct net_device *, unsigned short);/* Configure one device. */ -extern struct net_device *wavelan_probe(int unit); /* See Space.c. */ - -/**************************** VARIABLES ****************************/ - -/* - * This is the root of the linked list of WaveLAN drivers - * It is use to verify that we don't reuse the same base address - * for two different drivers and to clean up when removing the module. - */ -static net_local * wavelan_list = (net_local *) NULL; - -/* - * This table is used to translate the PSA value to IRQ number - * and vice versa. - */ -static u_char irqvals[] = -{ - 0, 0, 0, 0x01, - 0x02, 0x04, 0, 0x08, - 0, 0, 0x10, 0x20, - 0x40, 0, 0, 0x80, -}; - -/* - * Table of the available I/O addresses (base addresses) for WaveLAN - */ -static unsigned short iobase[] = -{ -#if 0 - /* Leave out 0x3C0 for now -- seems to clash with some video - * controllers. - * Leave out the others too -- we will always use 0x390 and leave - * 0x300 for the Ethernet device. - * Jean II: 0x3E0 is fine as well. - */ - 0x300, 0x390, 0x3E0, 0x3C0 -#endif /* 0 */ - 0x390, 0x3E0 -}; - -#ifdef MODULE -/* Parameters set by insmod */ -static int io[4]; -static int irq[4]; -static char *name[4]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(name, charp, NULL, 0); - -MODULE_PARM_DESC(io, "WaveLAN I/O base address(es),required"); -MODULE_PARM_DESC(irq, "WaveLAN IRQ number(s)"); -MODULE_PARM_DESC(name, "WaveLAN interface neme(s)"); -#endif /* MODULE */ - -#endif /* WAVELAN_P_H */ diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c deleted file mode 100644 index 431a20ec6db6..000000000000 --- a/drivers/net/wireless/wavelan_cs.c +++ /dev/null @@ -1,4635 +0,0 @@ -/* - * Wavelan Pcmcia driver - * - * Jean II - HPLB '96 - * - * Reorganisation and extension of the driver. - * Original copyright follow. See wavelan_cs.p.h for details. - * - * This code is derived from Anthony D. Joseph's code and all the changes here - * are also under the original copyright below. - * - * This code supports version 2.00 of WaveLAN/PCMCIA cards (2.4GHz), and - * can work on Linux 2.0.36 with support of David Hinds' PCMCIA Card Services - * - * Joe Finney (joe@comp.lancs.ac.uk) at Lancaster University in UK added - * critical code in the routine to initialize the Modem Management Controller. - * - * Thanks to Alan Cox and Bruce Janson for their advice. - * - * -- Yunzhou Li (scip4166@nus.sg) - * -#ifdef WAVELAN_ROAMING - * Roaming support added 07/22/98 by Justin Seger (jseger@media.mit.edu) - * based on patch by Joe Finney from Lancaster University. -#endif - * - * Lucent (formerly AT&T GIS, formerly NCR) WaveLAN PCMCIA card: An - * Ethernet-like radio transceiver controlled by an Intel 82593 coprocessor. - * - * A non-shared memory PCMCIA ethernet driver for linux - * - * ISA version modified to support PCMCIA by Anthony Joseph (adj@lcs.mit.edu) - * - * - * Joseph O'Sullivan & John Langford (josullvn@cs.cmu.edu & jcl@cs.cmu.edu) - * - * Apr 2 '98 made changes to bring the i82593 control/int handling in line - * with offical specs... - * - **************************************************************************** - * Copyright 1995 - * Anthony D. Joseph - * Massachusetts Institute of Technology - * - * Permission to use, copy, modify, and distribute this program - * for any purpose and without fee is hereby granted, provided - * that this copyright and permission notice appear on all copies - * and supporting documentation, the name of M.I.T. not be used - * in advertising or publicity pertaining to distribution of the - * program without specific prior permission, and notice be given - * in supporting documentation that copying and distribution is - * by permission of M.I.T. M.I.T. makes no representations about - * the suitability of this software for any purpose. It is pro- - * vided "as is" without express or implied warranty. - **************************************************************************** - * - */ - -/* Do *NOT* add other headers here, you are guaranteed to be wrong - Jean II */ -#include "wavelan_cs.p.h" /* Private header */ - -#ifdef WAVELAN_ROAMING -static void wl_cell_expiry(unsigned long data); -static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp); -static void wv_nwid_filter(unsigned char mode, net_local *lp); -#endif /* WAVELAN_ROAMING */ - -/************************* MISC SUBROUTINES **************************/ -/* - * Subroutines which won't fit in one of the following category - * (wavelan modem or i82593) - */ - -/******************* MODEM MANAGEMENT SUBROUTINES *******************/ -/* - * Useful subroutines to manage the modem of the wavelan - */ - -/*------------------------------------------------------------------*/ -/* - * Read from card's Host Adaptor Status Register. - */ -static inline u_char -hasr_read(u_long base) -{ - return(inb(HASR(base))); -} /* hasr_read */ - -/*------------------------------------------------------------------*/ -/* - * Write to card's Host Adapter Command Register. - */ -static inline void -hacr_write(u_long base, - u_char hacr) -{ - outb(hacr, HACR(base)); -} /* hacr_write */ - -/*------------------------------------------------------------------*/ -/* - * Write to card's Host Adapter Command Register. Include a delay for - * those times when it is needed. - */ -static void -hacr_write_slow(u_long base, - u_char hacr) -{ - hacr_write(base, hacr); - /* delay might only be needed sometimes */ - mdelay(1); -} /* hacr_write_slow */ - -/*------------------------------------------------------------------*/ -/* - * Read the Parameter Storage Area from the WaveLAN card's memory - */ -static void -psa_read(struct net_device * dev, - int o, /* offset in PSA */ - u_char * b, /* buffer to fill */ - int n) /* size to read */ -{ - net_local *lp = netdev_priv(dev); - u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1); - - while(n-- > 0) - { - *b++ = readb(ptr); - /* Due to a lack of address decode pins, the WaveLAN PCMCIA card - * only supports reading even memory addresses. That means the - * increment here MUST be two. - * Because of that, we can't use memcpy_fromio()... - */ - ptr += 2; - } -} /* psa_read */ - -/*------------------------------------------------------------------*/ -/* - * Write the Parameter Storage Area to the WaveLAN card's memory - */ -static void -psa_write(struct net_device * dev, - int o, /* Offset in psa */ - u_char * b, /* Buffer in memory */ - int n) /* Length of buffer */ -{ - net_local *lp = netdev_priv(dev); - u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1); - int count = 0; - unsigned int base = dev->base_addr; - /* As there seem to have no flag PSA_BUSY as in the ISA model, we are - * oblige to verify this address to know when the PSA is ready... */ - volatile u_char __iomem *verify = lp->mem + PSA_ADDR + - (psaoff(0, psa_comp_number) << 1); - - /* Authorize writing to PSA */ - hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN); - - while(n-- > 0) - { - /* write to PSA */ - writeb(*b++, ptr); - ptr += 2; - - /* I don't have the spec, so I don't know what the correct - * sequence to write is. This hack seem to work for me... */ - count = 0; - while((readb(verify) != PSA_COMP_PCMCIA_915) && (count++ < 100)) - mdelay(1); - } - - /* Put the host interface back in standard state */ - hacr_write(base, HACR_DEFAULT); -} /* psa_write */ - -#ifdef SET_PSA_CRC -/*------------------------------------------------------------------*/ -/* - * Calculate the PSA CRC - * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code - * NOTE: By specifying a length including the CRC position the - * returned value should be zero. (i.e. a correct checksum in the PSA) - * - * The Windows drivers don't use the CRC, but the AP and the PtP tool - * depend on it. - */ -static u_short -psa_crc(unsigned char * psa, /* The PSA */ - int size) /* Number of short for CRC */ -{ - int byte_cnt; /* Loop on the PSA */ - u_short crc_bytes = 0; /* Data in the PSA */ - int bit_cnt; /* Loop on the bits of the short */ - - for(byte_cnt = 0; byte_cnt < size; byte_cnt++ ) - { - crc_bytes ^= psa[byte_cnt]; /* Its an xor */ - - for(bit_cnt = 1; bit_cnt < 9; bit_cnt++ ) - { - if(crc_bytes & 0x0001) - crc_bytes = (crc_bytes >> 1) ^ 0xA001; - else - crc_bytes >>= 1 ; - } - } - - return crc_bytes; -} /* psa_crc */ -#endif /* SET_PSA_CRC */ - -/*------------------------------------------------------------------*/ -/* - * update the checksum field in the Wavelan's PSA - */ -static void -update_psa_checksum(struct net_device * dev) -{ -#ifdef SET_PSA_CRC - psa_t psa; - u_short crc; - - /* read the parameter storage area */ - psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); - - /* update the checksum */ - crc = psa_crc((unsigned char *) &psa, - sizeof(psa) - sizeof(psa.psa_crc[0]) - sizeof(psa.psa_crc[1]) - - sizeof(psa.psa_crc_status)); - - psa.psa_crc[0] = crc & 0xFF; - psa.psa_crc[1] = (crc & 0xFF00) >> 8; - - /* Write it ! */ - psa_write(dev, (char *)&psa.psa_crc - (char *)&psa, - (unsigned char *)&psa.psa_crc, 2); - -#ifdef DEBUG_IOCTL_INFO - printk (KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n", - dev->name, psa.psa_crc[0], psa.psa_crc[1]); - - /* Check again (luxury !) */ - crc = psa_crc((unsigned char *) &psa, - sizeof(psa) - sizeof(psa.psa_crc_status)); - - if(crc != 0) - printk(KERN_WARNING "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", dev->name); -#endif /* DEBUG_IOCTL_INFO */ -#endif /* SET_PSA_CRC */ -} /* update_psa_checksum */ - -/*------------------------------------------------------------------*/ -/* - * Write 1 byte to the MMC. - */ -static void -mmc_out(u_long base, - u_short o, - u_char d) -{ - int count = 0; - - /* Wait for MMC to go idle */ - while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY)) - udelay(10); - - outb((u_char)((o << 1) | MMR_MMI_WR), MMR(base)); - outb(d, MMD(base)); -} - -/*------------------------------------------------------------------*/ -/* - * Routine to write bytes to the Modem Management Controller. - * We start by the end because it is the way it should be ! - */ -static void -mmc_write(u_long base, - u_char o, - u_char * b, - int n) -{ - o += n; - b += n; - - while(n-- > 0 ) - mmc_out(base, --o, *(--b)); -} /* mmc_write */ - -/*------------------------------------------------------------------*/ -/* - * Read 1 byte from the MMC. - * Optimised version for 1 byte, avoid using memory... - */ -static u_char -mmc_in(u_long base, - u_short o) -{ - int count = 0; - - while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY)) - udelay(10); - outb(o << 1, MMR(base)); /* Set the read address */ - - outb(0, MMD(base)); /* Required dummy write */ - - while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY)) - udelay(10); - return (u_char) (inb(MMD(base))); /* Now do the actual read */ -} - -/*------------------------------------------------------------------*/ -/* - * Routine to read bytes from the Modem Management Controller. - * The implementation is complicated by a lack of address lines, - * which prevents decoding of the low-order bit. - * (code has just been moved in the above function) - * We start by the end because it is the way it should be ! - */ -static void -mmc_read(u_long base, - u_char o, - u_char * b, - int n) -{ - o += n; - b += n; - - while(n-- > 0) - *(--b) = mmc_in(base, --o); -} /* mmc_read */ - -/*------------------------------------------------------------------*/ -/* - * Get the type of encryption available... - */ -static inline int -mmc_encr(u_long base) /* i/o port of the card */ -{ - int temp; - - temp = mmc_in(base, mmroff(0, mmr_des_avail)); - if((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES)) - return 0; - else - return temp; -} - -/*------------------------------------------------------------------*/ -/* - * Wait for the frequency EEprom to complete a command... - */ -static void -fee_wait(u_long base, /* i/o port of the card */ - int delay, /* Base delay to wait for */ - int number) /* Number of time to wait */ -{ - int count = 0; /* Wait only a limited time */ - - while((count++ < number) && - (mmc_in(base, mmroff(0, mmr_fee_status)) & MMR_FEE_STATUS_BUSY)) - udelay(delay); -} - -/*------------------------------------------------------------------*/ -/* - * Read bytes from the Frequency EEprom (frequency select cards). - */ -static void -fee_read(u_long base, /* i/o port of the card */ - u_short o, /* destination offset */ - u_short * b, /* data buffer */ - int n) /* number of registers */ -{ - b += n; /* Position at the end of the area */ - - /* Write the address */ - mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1); - - /* Loop on all buffer */ - while(n-- > 0) - { - /* Write the read command */ - mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_READ); - - /* Wait until EEprom is ready (should be quick !) */ - fee_wait(base, 10, 100); - - /* Read the value */ - *--b = ((mmc_in(base, mmroff(0, mmr_fee_data_h)) << 8) | - mmc_in(base, mmroff(0, mmr_fee_data_l))); - } -} - - -/*------------------------------------------------------------------*/ -/* - * Write bytes from the Frequency EEprom (frequency select cards). - * This is a bit complicated, because the frequency eeprom has to - * be unprotected and the write enabled. - * Jean II - */ -static void -fee_write(u_long base, /* i/o port of the card */ - u_short o, /* destination offset */ - u_short * b, /* data buffer */ - int n) /* number of registers */ -{ - b += n; /* Position at the end of the area */ - -#ifdef EEPROM_IS_PROTECTED /* disabled */ -#ifdef DOESNT_SEEM_TO_WORK /* disabled */ - /* Ask to read the protected register */ - mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD); - - fee_wait(base, 10, 100); - - /* Read the protected register */ - printk("Protected 2 : %02X-%02X\n", - mmc_in(base, mmroff(0, mmr_fee_data_h)), - mmc_in(base, mmroff(0, mmr_fee_data_l))); -#endif /* DOESNT_SEEM_TO_WORK */ - - /* Enable protected register */ - mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN); - mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN); - - fee_wait(base, 10, 100); - - /* Unprotect area */ - mmc_out(base, mmwoff(0, mmw_fee_addr), o + n); - mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE); -#ifdef DOESNT_SEEM_TO_WORK /* disabled */ - /* Or use : */ - mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR); -#endif /* DOESNT_SEEM_TO_WORK */ - - fee_wait(base, 10, 100); -#endif /* EEPROM_IS_PROTECTED */ - - /* Write enable */ - mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN); - mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN); - - fee_wait(base, 10, 100); - - /* Write the EEprom address */ - mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1); - - /* Loop on all buffer */ - while(n-- > 0) - { - /* Write the value */ - mmc_out(base, mmwoff(0, mmw_fee_data_h), (*--b) >> 8); - mmc_out(base, mmwoff(0, mmw_fee_data_l), *b & 0xFF); - - /* Write the write command */ - mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WRITE); - - /* Wavelan doc says : wait at least 10 ms for EEBUSY = 0 */ - mdelay(10); - fee_wait(base, 10, 100); - } - - /* Write disable */ - mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS); - mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS); - - fee_wait(base, 10, 100); - -#ifdef EEPROM_IS_PROTECTED /* disabled */ - /* Reprotect EEprom */ - mmc_out(base, mmwoff(0, mmw_fee_addr), 0x00); - mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE); - - fee_wait(base, 10, 100); -#endif /* EEPROM_IS_PROTECTED */ -} - -/******************* WaveLAN Roaming routines... ********************/ - -#ifdef WAVELAN_ROAMING /* Conditional compile, see wavelan_cs.h */ - -static unsigned char WAVELAN_BEACON_ADDRESS[] = {0x09,0x00,0x0e,0x20,0x03,0x00}; - -static void wv_roam_init(struct net_device *dev) -{ - net_local *lp= netdev_priv(dev); - - /* Do not remove this unless you have a good reason */ - printk(KERN_NOTICE "%s: Warning, you have enabled roaming on" - " device %s !\n", dev->name, dev->name); - printk(KERN_NOTICE "Roaming is currently an experimental unsupported feature" - " of the Wavelan driver.\n"); - printk(KERN_NOTICE "It may work, but may also make the driver behave in" - " erratic ways or crash.\n"); - - lp->wavepoint_table.head=NULL; /* Initialise WavePoint table */ - lp->wavepoint_table.num_wavepoints=0; - lp->wavepoint_table.locked=0; - lp->curr_point=NULL; /* No default WavePoint */ - lp->cell_search=0; - - lp->cell_timer.data=(long)lp; /* Start cell expiry timer */ - lp->cell_timer.function=wl_cell_expiry; - lp->cell_timer.expires=jiffies+CELL_TIMEOUT; - add_timer(&lp->cell_timer); - - wv_nwid_filter(NWID_PROMISC,lp) ; /* Enter NWID promiscuous mode */ - /* to build up a good WavePoint */ - /* table... */ - printk(KERN_DEBUG "WaveLAN: Roaming enabled on device %s\n",dev->name); -} - -static void wv_roam_cleanup(struct net_device *dev) -{ - wavepoint_history *ptr,*old_ptr; - net_local *lp= netdev_priv(dev); - - printk(KERN_DEBUG "WaveLAN: Roaming Disabled on device %s\n",dev->name); - - /* Fixme : maybe we should check that the timer exist before deleting it */ - del_timer(&lp->cell_timer); /* Remove cell expiry timer */ - ptr=lp->wavepoint_table.head; /* Clear device's WavePoint table */ - while(ptr!=NULL) - { - old_ptr=ptr; - ptr=ptr->next; - wl_del_wavepoint(old_ptr,lp); - } -} - -/* Enable/Disable NWID promiscuous mode on a given device */ -static void wv_nwid_filter(unsigned char mode, net_local *lp) -{ - mm_t m; - unsigned long flags; - -#ifdef WAVELAN_ROAMING_DEBUG - printk(KERN_DEBUG "WaveLAN: NWID promisc %s, device %s\n",(mode==NWID_PROMISC) ? "on" : "off", lp->dev->name); -#endif - - /* Disable interrupts & save flags */ - spin_lock_irqsave(&lp->spinlock, flags); - - m.w.mmw_loopt_sel = (mode==NWID_PROMISC) ? MMW_LOOPT_SEL_DIS_NWID : 0x00; - mmc_write(lp->dev->base_addr, (char *)&m.w.mmw_loopt_sel - (char *)&m, (unsigned char *)&m.w.mmw_loopt_sel, 1); - - if(mode==NWID_PROMISC) - lp->cell_search=1; - else - lp->cell_search=0; - - /* ReEnable interrupts & restore flags */ - spin_unlock_irqrestore(&lp->spinlock, flags); -} - -/* Find a record in the WavePoint table matching a given NWID */ -static wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp) -{ - wavepoint_history *ptr=lp->wavepoint_table.head; - - while(ptr!=NULL){ - if(ptr->nwid==nwid) - return ptr; - ptr=ptr->next; - } - return NULL; -} - -/* Create a new wavepoint table entry */ -static wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp) -{ - wavepoint_history *new_wavepoint; - -#ifdef WAVELAN_ROAMING_DEBUG - printk(KERN_DEBUG "WaveLAN: New Wavepoint, NWID:%.4X\n",nwid); -#endif - - if(lp->wavepoint_table.num_wavepoints==MAX_WAVEPOINTS) - return NULL; - - new_wavepoint = kmalloc(sizeof(wavepoint_history),GFP_ATOMIC); - if(new_wavepoint==NULL) - return NULL; - - new_wavepoint->nwid=nwid; /* New WavePoints NWID */ - new_wavepoint->average_fast=0; /* Running Averages..*/ - new_wavepoint->average_slow=0; - new_wavepoint->qualptr=0; /* Start of ringbuffer */ - new_wavepoint->last_seq=seq-1; /* Last sequence no.seen */ - memset(new_wavepoint->sigqual,0,WAVEPOINT_HISTORY);/* Empty ringbuffer */ - - new_wavepoint->next=lp->wavepoint_table.head;/* Add to wavepoint table */ - new_wavepoint->prev=NULL; - - if(lp->wavepoint_table.head!=NULL) - lp->wavepoint_table.head->prev=new_wavepoint; - - lp->wavepoint_table.head=new_wavepoint; - - lp->wavepoint_table.num_wavepoints++; /* no. of visible wavepoints */ - - return new_wavepoint; -} - -/* Remove a wavepoint entry from WavePoint table */ -static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp) -{ - if(wavepoint==NULL) - return; - - if(lp->curr_point==wavepoint) - lp->curr_point=NULL; - - if(wavepoint->prev!=NULL) - wavepoint->prev->next=wavepoint->next; - - if(wavepoint->next!=NULL) - wavepoint->next->prev=wavepoint->prev; - - if(lp->wavepoint_table.head==wavepoint) - lp->wavepoint_table.head=wavepoint->next; - - lp->wavepoint_table.num_wavepoints--; - kfree(wavepoint); -} - -/* Timer callback function - checks WavePoint table for stale entries */ -static void wl_cell_expiry(unsigned long data) -{ - net_local *lp=(net_local *)data; - wavepoint_history *wavepoint=lp->wavepoint_table.head,*old_point; - -#if WAVELAN_ROAMING_DEBUG > 1 - printk(KERN_DEBUG "WaveLAN: Wavepoint timeout, dev %s\n",lp->dev->name); -#endif - - if(lp->wavepoint_table.locked) - { -#if WAVELAN_ROAMING_DEBUG > 1 - printk(KERN_DEBUG "WaveLAN: Wavepoint table locked...\n"); -#endif - - lp->cell_timer.expires=jiffies+1; /* If table in use, come back later */ - add_timer(&lp->cell_timer); - return; - } - - while(wavepoint!=NULL) - { - if(time_after(jiffies, wavepoint->last_seen + CELL_TIMEOUT)) - { -#ifdef WAVELAN_ROAMING_DEBUG - printk(KERN_DEBUG "WaveLAN: Bye bye %.4X\n",wavepoint->nwid); -#endif - - old_point=wavepoint; - wavepoint=wavepoint->next; - wl_del_wavepoint(old_point,lp); - } - else - wavepoint=wavepoint->next; - } - lp->cell_timer.expires=jiffies+CELL_TIMEOUT; - add_timer(&lp->cell_timer); -} - -/* Update SNR history of a wavepoint */ -static void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq) -{ - int i=0,num_missed=0,ptr=0; - int average_fast=0,average_slow=0; - - num_missed=(seq-wavepoint->last_seq)%WAVEPOINT_HISTORY;/* Have we missed - any beacons? */ - if(num_missed) - for(i=0;i<num_missed;i++) - { - wavepoint->sigqual[wavepoint->qualptr++]=0; /* If so, enter them as 0's */ - wavepoint->qualptr %=WAVEPOINT_HISTORY; /* in the ringbuffer. */ - } - wavepoint->last_seen=jiffies; /* Add beacon to history */ - wavepoint->last_seq=seq; - wavepoint->sigqual[wavepoint->qualptr++]=sigqual; - wavepoint->qualptr %=WAVEPOINT_HISTORY; - ptr=(wavepoint->qualptr-WAVEPOINT_FAST_HISTORY+WAVEPOINT_HISTORY)%WAVEPOINT_HISTORY; - - for(i=0;i<WAVEPOINT_FAST_HISTORY;i++) /* Update running averages */ - { - average_fast+=wavepoint->sigqual[ptr++]; - ptr %=WAVEPOINT_HISTORY; - } - - average_slow=average_fast; - for(i=WAVEPOINT_FAST_HISTORY;i<WAVEPOINT_HISTORY;i++) - { - average_slow+=wavepoint->sigqual[ptr++]; - ptr %=WAVEPOINT_HISTORY; - } - - wavepoint->average_fast=average_fast/WAVEPOINT_FAST_HISTORY; - wavepoint->average_slow=average_slow/WAVEPOINT_HISTORY; -} - -/* Perform a handover to a new WavePoint */ -static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp) -{ - unsigned int base = lp->dev->base_addr; - mm_t m; - unsigned long flags; - - if(wavepoint==lp->curr_point) /* Sanity check... */ - { - wv_nwid_filter(!NWID_PROMISC,lp); - return; - } - -#ifdef WAVELAN_ROAMING_DEBUG - printk(KERN_DEBUG "WaveLAN: Doing handover to %.4X, dev %s\n",wavepoint->nwid,lp->dev->name); -#endif - - /* Disable interrupts & save flags */ - spin_lock_irqsave(&lp->spinlock, flags); - - m.w.mmw_netw_id_l = wavepoint->nwid & 0xFF; - m.w.mmw_netw_id_h = (wavepoint->nwid & 0xFF00) >> 8; - - mmc_write(base, (char *)&m.w.mmw_netw_id_l - (char *)&m, (unsigned char *)&m.w.mmw_netw_id_l, 2); - - /* ReEnable interrupts & restore flags */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - wv_nwid_filter(!NWID_PROMISC,lp); - lp->curr_point=wavepoint; -} - -/* Called when a WavePoint beacon is received */ -static void wl_roam_gather(struct net_device * dev, - u_char * hdr, /* Beacon header */ - u_char * stats) /* SNR, Signal quality - of packet */ -{ - wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */ - unsigned short nwid=ntohs(beacon->nwid); - unsigned short sigqual=stats[2] & MMR_SGNL_QUAL; /* SNR of beacon */ - wavepoint_history *wavepoint=NULL; /* WavePoint table entry */ - net_local *lp = netdev_priv(dev); /* Device info */ - -#ifdef I_NEED_THIS_FEATURE - /* Some people don't need this, some other may need it */ - nwid=nwid^ntohs(beacon->domain_id); -#endif - -#if WAVELAN_ROAMING_DEBUG > 1 - printk(KERN_DEBUG "WaveLAN: beacon, dev %s:\n",dev->name); - printk(KERN_DEBUG "Domain: %.4X NWID: %.4X SigQual=%d\n",ntohs(beacon->domain_id),nwid,sigqual); -#endif - - lp->wavepoint_table.locked=1; /* <Mutex> */ - - wavepoint=wl_roam_check(nwid,lp); /* Find WavePoint table entry */ - if(wavepoint==NULL) /* If no entry, Create a new one... */ - { - wavepoint=wl_new_wavepoint(nwid,beacon->seq,lp); - if(wavepoint==NULL) - goto out; - } - if(lp->curr_point==NULL) /* If this is the only WavePoint, */ - wv_roam_handover(wavepoint, lp); /* Jump on it! */ - - wl_update_history(wavepoint, sigqual, beacon->seq); /* Update SNR history - stats. */ - - if(lp->curr_point->average_slow < SEARCH_THRESH_LOW) /* If our current */ - if(!lp->cell_search) /* WavePoint is getting faint, */ - wv_nwid_filter(NWID_PROMISC,lp); /* start looking for a new one */ - - if(wavepoint->average_slow > - lp->curr_point->average_slow + WAVELAN_ROAMING_DELTA) - wv_roam_handover(wavepoint, lp); /* Handover to a better WavePoint */ - - if(lp->curr_point->average_slow > SEARCH_THRESH_HIGH) /* If our SNR is */ - if(lp->cell_search) /* getting better, drop out of cell search mode */ - wv_nwid_filter(!NWID_PROMISC,lp); - -out: - lp->wavepoint_table.locked=0; /* </MUTEX> :-) */ -} - -/* Test this MAC frame a WavePoint beacon */ -static inline int WAVELAN_BEACON(unsigned char *data) -{ - wavepoint_beacon *beacon= (wavepoint_beacon *)data; - static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00}; - - if(memcmp(beacon,&beacon_template,9)==0) - return 1; - else - return 0; -} -#endif /* WAVELAN_ROAMING */ - -/************************ I82593 SUBROUTINES *************************/ -/* - * Useful subroutines to manage the Ethernet controller - */ - -/*------------------------------------------------------------------*/ -/* - * Routine to synchronously send a command to the i82593 chip. - * Should be called with interrupts disabled. - * (called by wv_packet_write(), wv_ru_stop(), wv_ru_start(), - * wv_82593_config() & wv_diag()) - */ -static int -wv_82593_cmd(struct net_device * dev, - char * str, - int cmd, - int result) -{ - unsigned int base = dev->base_addr; - int status; - int wait_completed; - long spin; - - /* Spin until the chip finishes executing its current command (if any) */ - spin = 1000; - do - { - /* Time calibration of the loop */ - udelay(10); - - /* Read the interrupt register */ - outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); - status = inb(LCSR(base)); - } - while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0)); - - /* If the interrupt hasn't been posted */ - if (spin < 0) { -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO "wv_82593_cmd: %s timeout (previous command), status 0x%02x\n", - str, status); -#endif - return(FALSE); - } - - /* Issue the command to the controller */ - outb(cmd, LCCR(base)); - - /* If we don't have to check the result of the command - * Note : this mean that the irq handler will deal with that */ - if(result == SR0_NO_RESULT) - return(TRUE); - - /* We are waiting for command completion */ - wait_completed = TRUE; - - /* Busy wait while the LAN controller executes the command. */ - spin = 1000; - do - { - /* Time calibration of the loop */ - udelay(10); - - /* Read the interrupt register */ - outb(CR0_STATUS_0 | OP0_NOP, LCCR(base)); - status = inb(LCSR(base)); - - /* Check if there was an interrupt posted */ - if((status & SR0_INTERRUPT)) - { - /* Acknowledge the interrupt */ - outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); - - /* Check if interrupt is a command completion */ - if(((status & SR0_BOTH_RX_TX) != SR0_BOTH_RX_TX) && - ((status & SR0_BOTH_RX_TX) != 0x0) && - !(status & SR0_RECEPTION)) - { - /* Signal command completion */ - wait_completed = FALSE; - } - else - { - /* Note : Rx interrupts will be handled later, because we can - * handle multiple Rx packets at once */ -#ifdef DEBUG_INTERRUPT_INFO - printk(KERN_INFO "wv_82593_cmd: not our interrupt\n"); -#endif - } - } - } - while(wait_completed && (spin-- > 0)); - - /* If the interrupt hasn't be posted */ - if(wait_completed) - { -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO "wv_82593_cmd: %s timeout, status 0x%02x\n", - str, status); -#endif - return(FALSE); - } - - /* Check the return code returned by the card (see above) against - * the expected return code provided by the caller */ - if((status & SR0_EVENT_MASK) != result) - { -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO "wv_82593_cmd: %s failed, status = 0x%x\n", - str, status); -#endif - return(FALSE); - } - - return(TRUE); -} /* wv_82593_cmd */ - -/*------------------------------------------------------------------*/ -/* - * This routine does a 593 op-code number 7, and obtains the diagnose - * status for the WaveLAN. - */ -static inline int -wv_diag(struct net_device * dev) -{ - return(wv_82593_cmd(dev, "wv_diag(): diagnose", - OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED)); -} /* wv_diag */ - -/*------------------------------------------------------------------*/ -/* - * Routine to read len bytes from the i82593's ring buffer, starting at - * chip address addr. The results read from the chip are stored in buf. - * The return value is the address to use for next the call. - */ -static int -read_ringbuf(struct net_device * dev, - int addr, - char * buf, - int len) -{ - unsigned int base = dev->base_addr; - int ring_ptr = addr; - int chunk_len; - char * buf_ptr = buf; - - /* Get all the buffer */ - while(len > 0) - { - /* Position the Program I/O Register at the ring buffer pointer */ - outb(ring_ptr & 0xff, PIORL(base)); - outb(((ring_ptr >> 8) & PIORH_MASK), PIORH(base)); - - /* First, determine how much we can read without wrapping around the - ring buffer */ - if((addr + len) < (RX_BASE + RX_SIZE)) - chunk_len = len; - else - chunk_len = RX_BASE + RX_SIZE - addr; - insb(PIOP(base), buf_ptr, chunk_len); - buf_ptr += chunk_len; - len -= chunk_len; - ring_ptr = (ring_ptr - RX_BASE + chunk_len) % RX_SIZE + RX_BASE; - } - return(ring_ptr); -} /* read_ringbuf */ - -/*------------------------------------------------------------------*/ -/* - * Reconfigure the i82593, or at least ask for it... - * Because wv_82593_config use the transmission buffer, we must do it - * when we are sure that there is no transmission, so we do it now - * or in wavelan_packet_xmit() (I can't find any better place, - * wavelan_interrupt is not an option...), so you may experience - * some delay sometime... - */ -static void -wv_82593_reconfig(struct net_device * dev) -{ - net_local * lp = netdev_priv(dev); - struct pcmcia_device * link = lp->link; - unsigned long flags; - - /* Arm the flag, will be cleard in wv_82593_config() */ - lp->reconfig_82593 = TRUE; - - /* Check if we can do it now ! */ - if((link->open) && (netif_running(dev)) && !(netif_queue_stopped(dev))) - { - spin_lock_irqsave(&lp->spinlock, flags); /* Disable interrupts */ - wv_82593_config(dev); - spin_unlock_irqrestore(&lp->spinlock, flags); /* Re-enable interrupts */ - } - else - { -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG - "%s: wv_82593_reconfig(): delayed (state = %lX, link = %d)\n", - dev->name, dev->state, link->open); -#endif - } -} - -/********************* DEBUG & INFO SUBROUTINES *********************/ -/* - * This routines are used in the code to show debug informations. - * Most of the time, it dump the content of hardware structures... - */ - -#ifdef DEBUG_PSA_SHOW -/*------------------------------------------------------------------*/ -/* - * Print the formatted contents of the Parameter Storage Area. - */ -static void -wv_psa_show(psa_t * p) -{ - printk(KERN_DEBUG "##### wavelan psa contents: #####\n"); - printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n", - p->psa_io_base_addr_1, - p->psa_io_base_addr_2, - p->psa_io_base_addr_3, - p->psa_io_base_addr_4); - printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n", - p->psa_rem_boot_addr_1, - p->psa_rem_boot_addr_2, - p->psa_rem_boot_addr_3); - printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params); - printk("psa_int_req_no: %d\n", p->psa_int_req_no); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "psa_unused0[]: %pM\n", p->psa_unused0); -#endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "psa_univ_mac_addr[]: %pM\n", p->psa_univ_mac_addr); - printk(KERN_DEBUG "psa_local_mac_addr[]: %pM\n", p->psa_local_mac_addr); - printk(KERN_DEBUG "psa_univ_local_sel: %d, ", p->psa_univ_local_sel); - printk("psa_comp_number: %d, ", p->psa_comp_number); - printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set); - printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ", - p->psa_feature_select); - printk("psa_subband/decay_update_prm: %d\n", p->psa_subband); - printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr); - printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay); - printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], p->psa_nwid[1]); - printk("psa_nwid_select: %d\n", p->psa_nwid_select); - printk(KERN_DEBUG "psa_encryption_select: %d, ", p->psa_encryption_select); - printk("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - p->psa_encryption_key[0], - p->psa_encryption_key[1], - p->psa_encryption_key[2], - p->psa_encryption_key[3], - p->psa_encryption_key[4], - p->psa_encryption_key[5], - p->psa_encryption_key[6], - p->psa_encryption_key[7]); - printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width); - printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ", - p->psa_call_code[0]); - printk("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", - p->psa_call_code[0], - p->psa_call_code[1], - p->psa_call_code[2], - p->psa_call_code[3], - p->psa_call_code[4], - p->psa_call_code[5], - p->psa_call_code[6], - p->psa_call_code[7]); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n", - p->psa_reserved[0], - p->psa_reserved[1]); -#endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status); - printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]); - printk("psa_crc_status: 0x%02x\n", p->psa_crc_status); -} /* wv_psa_show */ -#endif /* DEBUG_PSA_SHOW */ - -#ifdef DEBUG_MMC_SHOW -/*------------------------------------------------------------------*/ -/* - * Print the formatted status of the Modem Management Controller. - * This function need to be completed... - */ -static void -wv_mmc_show(struct net_device * dev) -{ - unsigned int base = dev->base_addr; - net_local * lp = netdev_priv(dev); - mmr_t m; - - /* Basic check */ - if(hasr_read(base) & HASR_NO_CLK) - { - printk(KERN_WARNING "%s: wv_mmc_show: modem not connected\n", - dev->name); - return; - } - - spin_lock_irqsave(&lp->spinlock, flags); - - /* Read the mmc */ - mmc_out(base, mmwoff(0, mmw_freeze), 1); - mmc_read(base, 0, (u_char *)&m, sizeof(m)); - mmc_out(base, mmwoff(0, mmw_freeze), 0); - - /* Don't forget to update statistics */ - lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; - - spin_unlock_irqrestore(&lp->spinlock, flags); - - printk(KERN_DEBUG "##### wavelan modem status registers: #####\n"); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", - m.mmr_unused0[0], - m.mmr_unused0[1], - m.mmr_unused0[2], - m.mmr_unused0[3], - m.mmr_unused0[4], - m.mmr_unused0[5], - m.mmr_unused0[6], - m.mmr_unused0[7]); -#endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n", - m.mmr_des_avail, m.mmr_des_status); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n", - m.mmr_unused1[0], - m.mmr_unused1[1], - m.mmr_unused1[2], - m.mmr_unused1[3], - m.mmr_unused1[4]); -#endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n", - m.mmr_dce_status, - (m.mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? "energy detected,":"", - (m.mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ? - "loop test indicated," : "", - (m.mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? "transmitter on," : "", - (m.mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ? - "jabber timer expired," : ""); - printk(KERN_DEBUG "Dsp ID: %02X\n", - m.mmr_dsp_id); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n", - m.mmr_unused2[0], - m.mmr_unused2[1]); -#endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n", - (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l, - (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l); - printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n", - m.mmr_thr_pre_set & MMR_THR_PRE_SET, - (m.mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : "below"); - printk(KERN_DEBUG "signal_lvl: %d [%s], ", - m.mmr_signal_lvl & MMR_SIGNAL_LVL, - (m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : "no new msg"); - printk("silence_lvl: %d [%s], ", m.mmr_silence_lvl & MMR_SILENCE_LVL, - (m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : "no new update"); - printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL, - (m.mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : "Antenna 0"); -#ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l); -#endif /* DEBUG_SHOW_UNUSED */ -} /* wv_mmc_show */ -#endif /* DEBUG_MMC_SHOW */ - -#ifdef DEBUG_I82593_SHOW -/*------------------------------------------------------------------*/ -/* - * Print the formatted status of the i82593's receive unit. - */ -static void -wv_ru_show(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - - printk(KERN_DEBUG "##### wavelan i82593 receiver status: #####\n"); - printk(KERN_DEBUG "ru: rfp %d stop %d", lp->rfp, lp->stop); - /* - * Not implemented yet... - */ - printk("\n"); -} /* wv_ru_show */ -#endif /* DEBUG_I82593_SHOW */ - -#ifdef DEBUG_DEVICE_SHOW -/*------------------------------------------------------------------*/ -/* - * Print the formatted status of the WaveLAN PCMCIA device driver. - */ -static void -wv_dev_show(struct net_device * dev) -{ - printk(KERN_DEBUG "dev:"); - printk(" state=%lX,", dev->state); - printk(" trans_start=%ld,", dev->trans_start); - printk(" flags=0x%x,", dev->flags); - printk("\n"); -} /* wv_dev_show */ - -/*------------------------------------------------------------------*/ -/* - * Print the formatted status of the WaveLAN PCMCIA device driver's - * private information. - */ -static void -wv_local_show(struct net_device * dev) -{ - net_local *lp = netdev_priv(dev); - - printk(KERN_DEBUG "local:"); - /* - * Not implemented yet... - */ - printk("\n"); -} /* wv_local_show */ -#endif /* DEBUG_DEVICE_SHOW */ - -#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) -/*------------------------------------------------------------------*/ -/* - * Dump packet header (and content if necessary) on the screen - */ -static void -wv_packet_info(u_char * p, /* Packet to dump */ - int length, /* Length of the packet */ - char * msg1, /* Name of the device */ - char * msg2) /* Name of the function */ -{ - int i; - int maxi; - - printk(KERN_DEBUG "%s: %s(): dest %pM, length %d\n", - msg1, msg2, p, length); - printk(KERN_DEBUG "%s: %s(): src %pM, type 0x%02X%02X\n", - msg1, msg2, &p[6], p[12], p[13]); - -#ifdef DEBUG_PACKET_DUMP - - printk(KERN_DEBUG "data=\""); - - if((maxi = length) > DEBUG_PACKET_DUMP) - maxi = DEBUG_PACKET_DUMP; - for(i = 14; i < maxi; i++) - if(p[i] >= ' ' && p[i] <= '~') - printk(" %c", p[i]); - else - printk("%02X", p[i]); - if(maxi < length) - printk(".."); - printk("\"\n"); - printk(KERN_DEBUG "\n"); -#endif /* DEBUG_PACKET_DUMP */ -} -#endif /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */ - -/*------------------------------------------------------------------*/ -/* - * This is the information which is displayed by the driver at startup - * There is a lot of flag to configure it at your will... - */ -static void -wv_init_info(struct net_device * dev) -{ - unsigned int base = dev->base_addr; - psa_t psa; - - /* Read the parameter storage area */ - psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); - -#ifdef DEBUG_PSA_SHOW - wv_psa_show(&psa); -#endif -#ifdef DEBUG_MMC_SHOW - wv_mmc_show(dev); -#endif -#ifdef DEBUG_I82593_SHOW - wv_ru_show(dev); -#endif - -#ifdef DEBUG_BASIC_SHOW - /* Now, let's go for the basic stuff */ - printk(KERN_NOTICE "%s: WaveLAN: port %#x, irq %d, hw_addr %pM", - dev->name, base, dev->irq, dev->dev_addr); - - /* Print current network id */ - if(psa.psa_nwid_select) - printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], psa.psa_nwid[1]); - else - printk(", nwid off"); - - /* If 2.00 card */ - if(!(mmc_in(base, mmroff(0, mmr_fee_status)) & - (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) - { - unsigned short freq; - - /* Ask the EEprom to read the frequency from the first area */ - fee_read(base, 0x00 /* 1st area - frequency... */, - &freq, 1); - - /* Print frequency */ - printk(", 2.00, %ld", (freq >> 6) + 2400L); - - /* Hack !!! */ - if(freq & 0x20) - printk(".5"); - } - else - { - printk(", PCMCIA, "); - switch (psa.psa_subband) - { - case PSA_SUBBAND_915: - printk("915"); - break; - case PSA_SUBBAND_2425: - printk("2425"); - break; - case PSA_SUBBAND_2460: - printk("2460"); - break; - case PSA_SUBBAND_2484: - printk("2484"); - break; - case PSA_SUBBAND_2430_5: - printk("2430.5"); - break; - default: - printk("unknown"); - } - } - - printk(" MHz\n"); -#endif /* DEBUG_BASIC_SHOW */ - -#ifdef DEBUG_VERSION_SHOW - /* Print version information */ - printk(KERN_NOTICE "%s", version); -#endif -} /* wv_init_info */ - -/********************* IOCTL, STATS & RECONFIG *********************/ -/* - * We found here routines that are called by Linux on differents - * occasions after the configuration and not for transmitting data - * These may be called when the user use ifconfig, /proc/net/dev - * or wireless extensions - */ - - -/*------------------------------------------------------------------*/ -/* - * Set or clear the multicast filter for this adaptor. - * num_addrs == -1 Promiscuous mode, receive all packets - * num_addrs == 0 Normal mode, clear multicast list - * num_addrs > 0 Multicast mode, receive normal and MC packets, - * and do best-effort filtering. - */ - -static void -wavelan_set_multicast_list(struct net_device * dev) -{ - net_local * lp = netdev_priv(dev); - -#ifdef DEBUG_IOCTL_TRACE - printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", dev->name); -#endif - -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n", - dev->name, dev->flags, dev->mc_count); -#endif - - if(dev->flags & IFF_PROMISC) - { - /* - * Enable promiscuous mode: receive all packets. - */ - if(!lp->promiscuous) - { - lp->promiscuous = 1; - lp->allmulticast = 0; - lp->mc_count = 0; - - wv_82593_reconfig(dev); - } - } - else - /* If all multicast addresses - * or too much multicast addresses for the hardware filter */ - if((dev->flags & IFF_ALLMULTI) || - (dev->mc_count > I82593_MAX_MULTICAST_ADDRESSES)) - { - /* - * Disable promiscuous mode, but active the all multicast mode - */ - if(!lp->allmulticast) - { - lp->promiscuous = 0; - lp->allmulticast = 1; - lp->mc_count = 0; - - wv_82593_reconfig(dev); - } - } - else - /* If there is some multicast addresses to send */ - if(dev->mc_list != (struct dev_mc_list *) NULL) - { - /* - * Disable promiscuous mode, but receive all packets - * in multicast list - */ -#ifdef MULTICAST_AVOID - if(lp->promiscuous || lp->allmulticast || - (dev->mc_count != lp->mc_count)) -#endif - { - lp->promiscuous = 0; - lp->allmulticast = 0; - lp->mc_count = dev->mc_count; - - wv_82593_reconfig(dev); - } - } - else - { - /* - * Switch to normal mode: disable promiscuous mode and - * clear the multicast list. - */ - if(lp->promiscuous || lp->mc_count == 0) - { - lp->promiscuous = 0; - lp->allmulticast = 0; - lp->mc_count = 0; - - wv_82593_reconfig(dev); - } - } -#ifdef DEBUG_IOCTL_TRACE - printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", dev->name); -#endif -} - -/*------------------------------------------------------------------*/ -/* - * This function doesn't exist... - * (Note : it was a nice way to test the reconfigure stuff...) - */ -#ifdef SET_MAC_ADDRESS -static int -wavelan_set_mac_address(struct net_device * dev, - void * addr) -{ - struct sockaddr * mac = addr; - - /* Copy the address */ - memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE); - - /* Reconfig the beast */ - wv_82593_reconfig(dev); - - return 0; -} -#endif /* SET_MAC_ADDRESS */ - - -/*------------------------------------------------------------------*/ -/* - * Frequency setting (for hardware able of it) - * It's a bit complicated and you don't really want to look into it... - */ -static int -wv_set_frequency(u_long base, /* i/o port of the card */ - iw_freq * frequency) -{ - const int BAND_NUM = 10; /* Number of bands */ - long freq = 0L; /* offset to 2.4 GHz in .5 MHz */ -#ifdef DEBUG_IOCTL_INFO - int i; -#endif - - /* Setting by frequency */ - /* Theoritically, you may set any frequency between - * the two limits with a 0.5 MHz precision. In practice, - * I don't want you to have trouble with local - * regulations... */ - if((frequency->e == 1) && - (frequency->m >= (int) 2.412e8) && (frequency->m <= (int) 2.487e8)) - { - freq = ((frequency->m / 10000) - 24000L) / 5; - } - - /* Setting by channel (same as wfreqsel) */ - /* Warning : each channel is 22MHz wide, so some of the channels - * will interfere... */ - if((frequency->e == 0) && - (frequency->m >= 0) && (frequency->m < BAND_NUM)) - { - /* Get frequency offset. */ - freq = channel_bands[frequency->m] >> 1; - } - - /* Verify if the frequency is allowed */ - if(freq != 0L) - { - u_short table[10]; /* Authorized frequency table */ - - /* Read the frequency table */ - fee_read(base, 0x71 /* frequency table */, - table, 10); - -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG "Frequency table :"); - for(i = 0; i < 10; i++) - { - printk(" %04X", - table[i]); - } - printk("\n"); -#endif - - /* Look in the table if the frequency is allowed */ - if(!(table[9 - ((freq - 24) / 16)] & - (1 << ((freq - 24) % 16)))) - return -EINVAL; /* not allowed */ - } - else - return -EINVAL; - - /* If we get a usable frequency */ - if(freq != 0L) - { - unsigned short area[16]; - unsigned short dac[2]; - unsigned short area_verify[16]; - unsigned short dac_verify[2]; - /* Corresponding gain (in the power adjust value table) - * see AT&T Wavelan Data Manual, REF 407-024689/E, page 3-8 - * & WCIN062D.DOC, page 6.2.9 */ - unsigned short power_limit[] = { 40, 80, 120, 160, 0 }; - int power_band = 0; /* Selected band */ - unsigned short power_adjust; /* Correct value */ - - /* Search for the gain */ - power_band = 0; - while((freq > power_limit[power_band]) && - (power_limit[++power_band] != 0)) - ; - - /* Read the first area */ - fee_read(base, 0x00, - area, 16); - - /* Read the DAC */ - fee_read(base, 0x60, - dac, 2); - - /* Read the new power adjust value */ - fee_read(base, 0x6B - (power_band >> 1), - &power_adjust, 1); - if(power_band & 0x1) - power_adjust >>= 8; - else - power_adjust &= 0xFF; - -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG "Wavelan EEprom Area 1 :"); - for(i = 0; i < 16; i++) - { - printk(" %04X", - area[i]); - } - printk("\n"); - - printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n", - dac[0], dac[1]); -#endif - - /* Frequency offset (for info only...) */ - area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F); - - /* Receiver Principle main divider coefficient */ - area[3] = (freq >> 1) + 2400L - 352L; - area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF); - - /* Transmitter Main divider coefficient */ - area[13] = (freq >> 1) + 2400L; - area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF); - - /* Others part of the area are flags, bit streams or unused... */ - - /* Set the value in the DAC */ - dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80); - dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF); - - /* Write the first area */ - fee_write(base, 0x00, - area, 16); - - /* Write the DAC */ - fee_write(base, 0x60, - dac, 2); - - /* We now should verify here that the EEprom writing was ok */ - - /* ReRead the first area */ - fee_read(base, 0x00, - area_verify, 16); - - /* ReRead the DAC */ - fee_read(base, 0x60, - dac_verify, 2); - - /* Compare */ - if(memcmp(area, area_verify, 16 * 2) || - memcmp(dac, dac_verify, 2 * 2)) - { -#ifdef DEBUG_IOCTL_ERROR - printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (?)\n"); -#endif - return -EOPNOTSUPP; - } - - /* We must download the frequency parameters to the - * synthetisers (from the EEprom - area 1) - * Note : as the EEprom is auto decremented, we set the end - * if the area... */ - mmc_out(base, mmwoff(0, mmw_fee_addr), 0x0F); - mmc_out(base, mmwoff(0, mmw_fee_ctrl), - MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD); - - /* Wait until the download is finished */ - fee_wait(base, 100, 100); - - /* We must now download the power adjust value (gain) to - * the synthetisers (from the EEprom - area 7 - DAC) */ - mmc_out(base, mmwoff(0, mmw_fee_addr), 0x61); - mmc_out(base, mmwoff(0, mmw_fee_ctrl), - MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD); - - /* Wait until the download is finished */ - fee_wait(base, 100, 100); - -#ifdef DEBUG_IOCTL_INFO - /* Verification of what we have done... */ - - printk(KERN_DEBUG "Wavelan EEprom Area 1 :"); - for(i = 0; i < 16; i++) - { - printk(" %04X", - area_verify[i]); - } - printk("\n"); - - printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n", - dac_verify[0], dac_verify[1]); -#endif - - return 0; - } - else - return -EINVAL; /* Bah, never get there... */ -} - -/*------------------------------------------------------------------*/ -/* - * Give the list of available frequencies - */ -static int -wv_frequency_list(u_long base, /* i/o port of the card */ - iw_freq * list, /* List of frequency to fill */ - int max) /* Maximum number of frequencies */ -{ - u_short table[10]; /* Authorized frequency table */ - long freq = 0L; /* offset to 2.4 GHz in .5 MHz + 12 MHz */ - int i; /* index in the table */ - const int BAND_NUM = 10; /* Number of bands */ - int c = 0; /* Channel number */ - - /* Read the frequency table */ - fee_read(base, 0x71 /* frequency table */, - table, 10); - - /* Look all frequencies */ - i = 0; - for(freq = 0; freq < 150; freq++) - /* Look in the table if the frequency is allowed */ - if(table[9 - (freq / 16)] & (1 << (freq % 16))) - { - /* Compute approximate channel number */ - while((((channel_bands[c] >> 1) - 24) < freq) && - (c < BAND_NUM)) - c++; - list[i].i = c; /* Set the list index */ - - /* put in the list */ - list[i].m = (((freq + 24) * 5) + 24000L) * 10000; - list[i++].e = 1; - - /* Check number */ - if(i >= max) - return(i); - } - - return(i); -} - -#ifdef IW_WIRELESS_SPY -/*------------------------------------------------------------------*/ -/* - * Gather wireless spy statistics : for each packet, compare the source - * address with out list, and if match, get the stats... - * Sorry, but this function really need wireless extensions... - */ -static inline void -wl_spy_gather(struct net_device * dev, - u_char * mac, /* MAC address */ - u_char * stats) /* Statistics to gather */ -{ - struct iw_quality wstats; - - wstats.qual = stats[2] & MMR_SGNL_QUAL; - wstats.level = stats[0] & MMR_SIGNAL_LVL; - wstats.noise = stats[1] & MMR_SILENCE_LVL; - wstats.updated = 0x7; - - /* Update spy records */ - wireless_spy_update(dev, mac, &wstats); -} -#endif /* IW_WIRELESS_SPY */ - -#ifdef HISTOGRAM -/*------------------------------------------------------------------*/ -/* - * This function calculate an histogram on the signal level. - * As the noise is quite constant, it's like doing it on the SNR. - * We have defined a set of interval (lp->his_range), and each time - * the level goes in that interval, we increment the count (lp->his_sum). - * With this histogram you may detect if one wavelan is really weak, - * or you may also calculate the mean and standard deviation of the level... - */ -static inline void -wl_his_gather(struct net_device * dev, - u_char * stats) /* Statistics to gather */ -{ - net_local * lp = netdev_priv(dev); - u_char level = stats[0] & MMR_SIGNAL_LVL; - int i; - - /* Find the correct interval */ - i = 0; - while((i < (lp->his_number - 1)) && (level >= lp->his_range[i++])) - ; - - /* Increment interval counter */ - (lp->his_sum[i])++; -} -#endif /* HISTOGRAM */ - -static void wl_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - strncpy(info->driver, "wavelan_cs", sizeof(info->driver)-1); -} - -static const struct ethtool_ops ops = { - .get_drvinfo = wl_get_drvinfo -}; - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get protocol name - */ -static int wavelan_get_name(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - strcpy(wrqu->name, "WaveLAN"); - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set NWID - */ -static int wavelan_set_nwid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned int base = dev->base_addr; - net_local *lp = netdev_priv(dev); - psa_t psa; - mm_t m; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Set NWID in WaveLAN. */ - if (!wrqu->nwid.disabled) { - /* Set NWID in psa */ - psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8; - psa.psa_nwid[1] = wrqu->nwid.value & 0xFF; - psa.psa_nwid_select = 0x01; - psa_write(dev, - (char *) psa.psa_nwid - (char *) &psa, - (unsigned char *) psa.psa_nwid, 3); - - /* Set NWID in mmc. */ - m.w.mmw_netw_id_l = psa.psa_nwid[1]; - m.w.mmw_netw_id_h = psa.psa_nwid[0]; - mmc_write(base, - (char *) &m.w.mmw_netw_id_l - - (char *) &m, - (unsigned char *) &m.w.mmw_netw_id_l, 2); - mmc_out(base, mmwoff(0, mmw_loopt_sel), 0x00); - } else { - /* Disable NWID in the psa. */ - psa.psa_nwid_select = 0x00; - psa_write(dev, - (char *) &psa.psa_nwid_select - - (char *) &psa, - (unsigned char *) &psa.psa_nwid_select, - 1); - - /* Disable NWID in the mmc (no filtering). */ - mmc_out(base, mmwoff(0, mmw_loopt_sel), - MMW_LOOPT_SEL_DIS_NWID); - } - /* update the Wavelan checksum */ - update_psa_checksum(dev); - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get NWID - */ -static int wavelan_get_nwid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); - psa_t psa; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Read the NWID. */ - psa_read(dev, - (char *) psa.psa_nwid - (char *) &psa, - (unsigned char *) psa.psa_nwid, 3); - wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1]; - wrqu->nwid.disabled = !(psa.psa_nwid_select); - wrqu->nwid.fixed = 1; /* Superfluous */ - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set frequency - */ -static int wavelan_set_freq(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned int base = dev->base_addr; - net_local *lp = netdev_priv(dev); - unsigned long flags; - int ret; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */ - if (!(mmc_in(base, mmroff(0, mmr_fee_status)) & - (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) - ret = wv_set_frequency(base, &(wrqu->freq)); - else - ret = -EOPNOTSUPP; - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get frequency - */ -static int wavelan_get_freq(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned int base = dev->base_addr; - net_local *lp = netdev_priv(dev); - psa_t psa; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). - * Does it work for everybody, especially old cards? */ - if (!(mmc_in(base, mmroff(0, mmr_fee_status)) & - (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { - unsigned short freq; - - /* Ask the EEPROM to read the frequency from the first area. */ - fee_read(base, 0x00, &freq, 1); - wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000; - wrqu->freq.e = 1; - } else { - psa_read(dev, - (char *) &psa.psa_subband - (char *) &psa, - (unsigned char *) &psa.psa_subband, 1); - - if (psa.psa_subband <= 4) { - wrqu->freq.m = fixed_bands[psa.psa_subband]; - wrqu->freq.e = (psa.psa_subband != 0); - } else - ret = -EOPNOTSUPP; - } - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set level threshold - */ -static int wavelan_set_sens(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned int base = dev->base_addr; - net_local *lp = netdev_priv(dev); - psa_t psa; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Set the level threshold. */ - /* We should complain loudly if wrqu->sens.fixed = 0, because we - * can't set auto mode... */ - psa.psa_thr_pre_set = wrqu->sens.value & 0x3F; - psa_write(dev, - (char *) &psa.psa_thr_pre_set - (char *) &psa, - (unsigned char *) &psa.psa_thr_pre_set, 1); - /* update the Wavelan checksum */ - update_psa_checksum(dev); - mmc_out(base, mmwoff(0, mmw_thr_pre_set), - psa.psa_thr_pre_set); - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get level threshold - */ -static int wavelan_get_sens(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); - psa_t psa; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Read the level threshold. */ - psa_read(dev, - (char *) &psa.psa_thr_pre_set - (char *) &psa, - (unsigned char *) &psa.psa_thr_pre_set, 1); - wrqu->sens.value = psa.psa_thr_pre_set & 0x3F; - wrqu->sens.fixed = 1; - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set encryption key - */ -static int wavelan_set_encode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned int base = dev->base_addr; - net_local *lp = netdev_priv(dev); - unsigned long flags; - psa_t psa; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Check if capable of encryption */ - if (!mmc_encr(base)) { - ret = -EOPNOTSUPP; - } - - /* Check the size of the key */ - if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) { - ret = -EINVAL; - } - - if(!ret) { - /* Basic checking... */ - if (wrqu->encoding.length == 8) { - /* Copy the key in the driver */ - memcpy(psa.psa_encryption_key, extra, - wrqu->encoding.length); - psa.psa_encryption_select = 1; - - psa_write(dev, - (char *) &psa.psa_encryption_select - - (char *) &psa, - (unsigned char *) &psa. - psa_encryption_select, 8 + 1); - - mmc_out(base, mmwoff(0, mmw_encr_enable), - MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE); - mmc_write(base, mmwoff(0, mmw_encr_key), - (unsigned char *) &psa. - psa_encryption_key, 8); - } - - /* disable encryption */ - if (wrqu->encoding.flags & IW_ENCODE_DISABLED) { - psa.psa_encryption_select = 0; - psa_write(dev, - (char *) &psa.psa_encryption_select - - (char *) &psa, - (unsigned char *) &psa. - psa_encryption_select, 1); - - mmc_out(base, mmwoff(0, mmw_encr_enable), 0); - } - /* update the Wavelan checksum */ - update_psa_checksum(dev); - } - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get encryption key - */ -static int wavelan_get_encode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned int base = dev->base_addr; - net_local *lp = netdev_priv(dev); - psa_t psa; - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Check if encryption is available */ - if (!mmc_encr(base)) { - ret = -EOPNOTSUPP; - } else { - /* Read the encryption key */ - psa_read(dev, - (char *) &psa.psa_encryption_select - - (char *) &psa, - (unsigned char *) &psa. - psa_encryption_select, 1 + 8); - - /* encryption is enabled ? */ - if (psa.psa_encryption_select) - wrqu->encoding.flags = IW_ENCODE_ENABLED; - else - wrqu->encoding.flags = IW_ENCODE_DISABLED; - wrqu->encoding.flags |= mmc_encr(base); - - /* Copy the key to the user buffer */ - wrqu->encoding.length = 8; - memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length); - } - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -#ifdef WAVELAN_ROAMING_EXT -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set ESSID (domain) - */ -static int wavelan_set_essid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Check if disable */ - if(wrqu->data.flags == 0) - lp->filter_domains = 0; - else { - char essid[IW_ESSID_MAX_SIZE + 1]; - char * endp; - - /* Terminate the string */ - memcpy(essid, extra, wrqu->data.length); - essid[IW_ESSID_MAX_SIZE] = '\0'; - -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG "SetEssid : ``%s''\n", essid); -#endif /* DEBUG_IOCTL_INFO */ - - /* Convert to a number (note : Wavelan specific) */ - lp->domain_id = simple_strtoul(essid, &endp, 16); - /* Has it worked ? */ - if(endp > essid) - lp->filter_domains = 1; - else { - lp->filter_domains = 0; - ret = -EINVAL; - } - } - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get ESSID (domain) - */ -static int wavelan_get_essid(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); - - /* Is the domain ID active ? */ - wrqu->data.flags = lp->filter_domains; - - /* Copy Domain ID into a string (Wavelan specific) */ - /* Sound crazy, be we can't have a snprintf in the kernel !!! */ - sprintf(extra, "%lX", lp->domain_id); - extra[IW_ESSID_MAX_SIZE] = '\0'; - - /* Set the length */ - wrqu->data.length = strlen(extra); - - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set AP address - */ -static int wavelan_set_wap(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG "Set AP to : %pM\n", wrqu->ap_addr.sa_data); -#endif /* DEBUG_IOCTL_INFO */ - - return -EOPNOTSUPP; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get AP address - */ -static int wavelan_get_wap(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - /* Should get the real McCoy instead of own Ethernet address */ - memcpy(wrqu->ap_addr.sa_data, dev->dev_addr, WAVELAN_ADDR_SIZE); - wrqu->ap_addr.sa_family = ARPHRD_ETHER; - - return -EOPNOTSUPP; -} -#endif /* WAVELAN_ROAMING_EXT */ - -#ifdef WAVELAN_ROAMING -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : set mode - */ -static int wavelan_set_mode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); - unsigned long flags; - int ret = 0; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Check mode */ - switch(wrqu->mode) { - case IW_MODE_ADHOC: - if(do_roaming) { - wv_roam_cleanup(dev); - do_roaming = 0; - } - break; - case IW_MODE_INFRA: - if(!do_roaming) { - wv_roam_init(dev); - do_roaming = 1; - } - break; - default: - ret = -EINVAL; - } - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get mode - */ -static int wavelan_get_mode(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - if(do_roaming) - wrqu->mode = IW_MODE_INFRA; - else - wrqu->mode = IW_MODE_ADHOC; - - return 0; -} -#endif /* WAVELAN_ROAMING */ - -/*------------------------------------------------------------------*/ -/* - * Wireless Handler : get range info - */ -static int wavelan_get_range(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned int base = dev->base_addr; - net_local *lp = netdev_priv(dev); - struct iw_range *range = (struct iw_range *) extra; - unsigned long flags; - int ret = 0; - - /* Set the length (very important for backward compatibility) */ - wrqu->data.length = sizeof(struct iw_range); - - /* Set all the info we don't care or don't know about to zero */ - memset(range, 0, sizeof(struct iw_range)); - - /* Set the Wireless Extension versions */ - range->we_version_compiled = WIRELESS_EXT; - range->we_version_source = 9; - - /* Set information in the range struct. */ - range->throughput = 1.4 * 1000 * 1000; /* don't argue on this ! */ - range->min_nwid = 0x0000; - range->max_nwid = 0xFFFF; - - range->sensitivity = 0x3F; - range->max_qual.qual = MMR_SGNL_QUAL; - range->max_qual.level = MMR_SIGNAL_LVL; - range->max_qual.noise = MMR_SILENCE_LVL; - range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */ - /* Need to get better values for those two */ - range->avg_qual.level = 30; - range->avg_qual.noise = 8; - - range->num_bitrates = 1; - range->bitrate[0] = 2000000; /* 2 Mb/s */ - - /* Event capability (kernel + driver) */ - range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) | - IW_EVENT_CAPA_MASK(0x8B04) | - IW_EVENT_CAPA_MASK(0x8B06)); - range->event_capa[1] = IW_EVENT_CAPA_K_1; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */ - if (!(mmc_in(base, mmroff(0, mmr_fee_status)) & - (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { - range->num_channels = 10; - range->num_frequency = wv_frequency_list(base, range->freq, - IW_MAX_FREQUENCIES); - } else - range->num_channels = range->num_frequency = 0; - - /* Encryption supported ? */ - if (mmc_encr(base)) { - range->encoding_size[0] = 8; /* DES = 64 bits key */ - range->num_encoding_sizes = 1; - range->max_encoding_tokens = 1; /* Only one key possible */ - } else { - range->num_encoding_sizes = 0; - range->max_encoding_tokens = 0; - } - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return ret; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Private Handler : set quality threshold - */ -static int wavelan_set_qthr(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - unsigned int base = dev->base_addr; - net_local *lp = netdev_priv(dev); - psa_t psa; - unsigned long flags; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - psa.psa_quality_thr = *(extra) & 0x0F; - psa_write(dev, - (char *) &psa.psa_quality_thr - (char *) &psa, - (unsigned char *) &psa.psa_quality_thr, 1); - /* update the Wavelan checksum */ - update_psa_checksum(dev); - mmc_out(base, mmwoff(0, mmw_quality_thr), - psa.psa_quality_thr); - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Private Handler : get quality threshold - */ -static int wavelan_get_qthr(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); - psa_t psa; - unsigned long flags; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - psa_read(dev, - (char *) &psa.psa_quality_thr - (char *) &psa, - (unsigned char *) &psa.psa_quality_thr, 1); - *(extra) = psa.psa_quality_thr & 0x0F; - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return 0; -} - -#ifdef WAVELAN_ROAMING -/*------------------------------------------------------------------*/ -/* - * Wireless Private Handler : set roaming - */ -static int wavelan_set_roam(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); - unsigned long flags; - - /* Disable interrupts and save flags. */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Note : should check if user == root */ - if(do_roaming && (*extra)==0) - wv_roam_cleanup(dev); - else if(do_roaming==0 && (*extra)!=0) - wv_roam_init(dev); - - do_roaming = (*extra); - - /* Enable interrupts and restore flags. */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Private Handler : get quality threshold - */ -static int wavelan_get_roam(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - *(extra) = do_roaming; - - return 0; -} -#endif /* WAVELAN_ROAMING */ - -#ifdef HISTOGRAM -/*------------------------------------------------------------------*/ -/* - * Wireless Private Handler : set histogram - */ -static int wavelan_set_histo(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); - - /* Check the number of intervals. */ - if (wrqu->data.length > 16) { - return(-E2BIG); - } - - /* Disable histo while we copy the addresses. - * As we don't disable interrupts, we need to do this */ - lp->his_number = 0; - - /* Are there ranges to copy? */ - if (wrqu->data.length > 0) { - /* Copy interval ranges to the driver */ - memcpy(lp->his_range, extra, wrqu->data.length); - - { - int i; - printk(KERN_DEBUG "Histo :"); - for(i = 0; i < wrqu->data.length; i++) - printk(" %d", lp->his_range[i]); - printk("\n"); - } - - /* Reset result structure. */ - memset(lp->his_sum, 0x00, sizeof(long) * 16); - } - - /* Now we can set the number of ranges */ - lp->his_number = wrqu->data.length; - - return(0); -} - -/*------------------------------------------------------------------*/ -/* - * Wireless Private Handler : get histogram - */ -static int wavelan_get_histo(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - net_local *lp = netdev_priv(dev); - - /* Set the number of intervals. */ - wrqu->data.length = lp->his_number; - - /* Give back the distribution statistics */ - if(lp->his_number > 0) - memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number); - - return(0); -} -#endif /* HISTOGRAM */ - -/*------------------------------------------------------------------*/ -/* - * Structures to export the Wireless Handlers - */ - -static const struct iw_priv_args wavelan_private_args[] = { -/*{ cmd, set_args, get_args, name } */ - { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" }, - { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" }, - { SIOCSIPROAM, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setroam" }, - { SIOCGIPROAM, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getroam" }, - { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16, 0, "sethisto" }, - { SIOCGIPHISTO, 0, IW_PRIV_TYPE_INT | 16, "gethisto" }, -}; - -static const iw_handler wavelan_handler[] = -{ - NULL, /* SIOCSIWNAME */ - wavelan_get_name, /* SIOCGIWNAME */ - wavelan_set_nwid, /* SIOCSIWNWID */ - wavelan_get_nwid, /* SIOCGIWNWID */ - wavelan_set_freq, /* SIOCSIWFREQ */ - wavelan_get_freq, /* SIOCGIWFREQ */ -#ifdef WAVELAN_ROAMING - wavelan_set_mode, /* SIOCSIWMODE */ - wavelan_get_mode, /* SIOCGIWMODE */ -#else /* WAVELAN_ROAMING */ - NULL, /* SIOCSIWMODE */ - NULL, /* SIOCGIWMODE */ -#endif /* WAVELAN_ROAMING */ - wavelan_set_sens, /* SIOCSIWSENS */ - wavelan_get_sens, /* SIOCGIWSENS */ - NULL, /* SIOCSIWRANGE */ - wavelan_get_range, /* SIOCGIWRANGE */ - NULL, /* SIOCSIWPRIV */ - NULL, /* SIOCGIWPRIV */ - NULL, /* SIOCSIWSTATS */ - NULL, /* SIOCGIWSTATS */ - iw_handler_set_spy, /* SIOCSIWSPY */ - iw_handler_get_spy, /* SIOCGIWSPY */ - iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ - iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ -#ifdef WAVELAN_ROAMING_EXT - wavelan_set_wap, /* SIOCSIWAP */ - wavelan_get_wap, /* SIOCGIWAP */ - NULL, /* -- hole -- */ - NULL, /* SIOCGIWAPLIST */ - NULL, /* -- hole -- */ - NULL, /* -- hole -- */ - wavelan_set_essid, /* SIOCSIWESSID */ - wavelan_get_essid, /* SIOCGIWESSID */ -#else /* WAVELAN_ROAMING_EXT */ - NULL, /* SIOCSIWAP */ - NULL, /* SIOCGIWAP */ - NULL, /* -- hole -- */ - NULL, /* SIOCGIWAPLIST */ - NULL, /* -- hole -- */ - NULL, /* -- hole -- */ - NULL, /* SIOCSIWESSID */ - NULL, /* SIOCGIWESSID */ -#endif /* WAVELAN_ROAMING_EXT */ - NULL, /* SIOCSIWNICKN */ - NULL, /* SIOCGIWNICKN */ - NULL, /* -- hole -- */ - NULL, /* -- hole -- */ - NULL, /* SIOCSIWRATE */ - NULL, /* SIOCGIWRATE */ - NULL, /* SIOCSIWRTS */ - NULL, /* SIOCGIWRTS */ - NULL, /* SIOCSIWFRAG */ - NULL, /* SIOCGIWFRAG */ - NULL, /* SIOCSIWTXPOW */ - NULL, /* SIOCGIWTXPOW */ - NULL, /* SIOCSIWRETRY */ - NULL, /* SIOCGIWRETRY */ - wavelan_set_encode, /* SIOCSIWENCODE */ - wavelan_get_encode, /* SIOCGIWENCODE */ -}; - -static const iw_handler wavelan_private_handler[] = -{ - wavelan_set_qthr, /* SIOCIWFIRSTPRIV */ - wavelan_get_qthr, /* SIOCIWFIRSTPRIV + 1 */ -#ifdef WAVELAN_ROAMING - wavelan_set_roam, /* SIOCIWFIRSTPRIV + 2 */ - wavelan_get_roam, /* SIOCIWFIRSTPRIV + 3 */ -#else /* WAVELAN_ROAMING */ - NULL, /* SIOCIWFIRSTPRIV + 2 */ - NULL, /* SIOCIWFIRSTPRIV + 3 */ -#endif /* WAVELAN_ROAMING */ -#ifdef HISTOGRAM - wavelan_set_histo, /* SIOCIWFIRSTPRIV + 4 */ - wavelan_get_histo, /* SIOCIWFIRSTPRIV + 5 */ -#endif /* HISTOGRAM */ -}; - -static const struct iw_handler_def wavelan_handler_def = -{ - .num_standard = ARRAY_SIZE(wavelan_handler), - .num_private = ARRAY_SIZE(wavelan_private_handler), - .num_private_args = ARRAY_SIZE(wavelan_private_args), - .standard = wavelan_handler, - .private = wavelan_private_handler, - .private_args = wavelan_private_args, - .get_wireless_stats = wavelan_get_wireless_stats, -}; - -/*------------------------------------------------------------------*/ -/* - * Get wireless statistics - * Called by /proc/net/wireless... - */ -static iw_stats * -wavelan_get_wireless_stats(struct net_device * dev) -{ - unsigned int base = dev->base_addr; - net_local * lp = netdev_priv(dev); - mmr_t m; - iw_stats * wstats; - unsigned long flags; - -#ifdef DEBUG_IOCTL_TRACE - printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", dev->name); -#endif - - /* Disable interrupts & save flags */ - spin_lock_irqsave(&lp->spinlock, flags); - - wstats = &lp->wstats; - - /* Get data from the mmc */ - mmc_out(base, mmwoff(0, mmw_freeze), 1); - - mmc_read(base, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1); - mmc_read(base, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, 2); - mmc_read(base, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, 4); - - mmc_out(base, mmwoff(0, mmw_freeze), 0); - - /* Copy data to wireless stuff */ - wstats->status = m.mmr_dce_status & MMR_DCE_STATUS; - wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL; - wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL; - wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL; - wstats->qual.updated = (((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) | - ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) | - ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5)); - wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; - wstats->discard.code = 0L; - wstats->discard.misc = 0L; - - /* ReEnable interrupts & restore flags */ - spin_unlock_irqrestore(&lp->spinlock, flags); - -#ifdef DEBUG_IOCTL_TRACE - printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", dev->name); -#endif - return &lp->wstats; -} - -/************************* PACKET RECEPTION *************************/ -/* - * This part deal with receiving the packets. - * The interrupt handler get an interrupt when a packet has been - * successfully received and called this part... - */ - -/*------------------------------------------------------------------*/ -/* - * Calculate the starting address of the frame pointed to by the receive - * frame pointer and verify that the frame seem correct - * (called by wv_packet_rcv()) - */ -static int -wv_start_of_frame(struct net_device * dev, - int rfp, /* end of frame */ - int wrap) /* start of buffer */ -{ - unsigned int base = dev->base_addr; - int rp; - int len; - - rp = (rfp - 5 + RX_SIZE) % RX_SIZE; - outb(rp & 0xff, PIORL(base)); - outb(((rp >> 8) & PIORH_MASK), PIORH(base)); - len = inb(PIOP(base)); - len |= inb(PIOP(base)) << 8; - - /* Sanity checks on size */ - /* Frame too big */ - if(len > MAXDATAZ + 100) - { -#ifdef DEBUG_RX_ERROR - printk(KERN_INFO "%s: wv_start_of_frame: Received frame too large, rfp %d len 0x%x\n", - dev->name, rfp, len); -#endif - return(-1); - } - - /* Frame too short */ - if(len < 7) - { -#ifdef DEBUG_RX_ERROR - printk(KERN_INFO "%s: wv_start_of_frame: Received null frame, rfp %d len 0x%x\n", - dev->name, rfp, len); -#endif - return(-1); - } - - /* Wrap around buffer */ - if(len > ((wrap - (rfp - len) + RX_SIZE) % RX_SIZE)) /* magic formula ! */ - { -#ifdef DEBUG_RX_ERROR - printk(KERN_INFO "%s: wv_start_of_frame: wrap around buffer, wrap %d rfp %d len 0x%x\n", - dev->name, wrap, rfp, len); -#endif - return(-1); - } - - return((rp - len + RX_SIZE) % RX_SIZE); -} /* wv_start_of_frame */ - -/*------------------------------------------------------------------*/ -/* - * This routine does the actual copy of data (including the ethernet - * header structure) from the WaveLAN card to an sk_buff chain that - * will be passed up to the network interface layer. NOTE: We - * currently don't handle trailer protocols (neither does the rest of - * the network interface), so if that is needed, it will (at least in - * part) be added here. The contents of the receive ring buffer are - * copied to a message chain that is then passed to the kernel. - * - * Note: if any errors occur, the packet is "dropped on the floor" - * (called by wv_packet_rcv()) - */ -static void -wv_packet_read(struct net_device * dev, - int fd_p, - int sksize) -{ - net_local * lp = netdev_priv(dev); - struct sk_buff * skb; - -#ifdef DEBUG_RX_TRACE - printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n", - dev->name, fd_p, sksize); -#endif - - /* Allocate some buffer for the new packet */ - if((skb = dev_alloc_skb(sksize+2)) == (struct sk_buff *) NULL) - { -#ifdef DEBUG_RX_ERROR - printk(KERN_INFO "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC)\n", - dev->name, sksize); -#endif - dev->stats.rx_dropped++; - /* - * Not only do we want to return here, but we also need to drop the - * packet on the floor to clear the interrupt. - */ - return; - } - - skb_reserve(skb, 2); - fd_p = read_ringbuf(dev, fd_p, (char *) skb_put(skb, sksize), sksize); - skb->protocol = eth_type_trans(skb, dev); - -#ifdef DEBUG_RX_INFO - wv_packet_info(skb_mac_header(skb), sksize, dev->name, "wv_packet_read"); -#endif /* DEBUG_RX_INFO */ - - /* Statistics gathering & stuff associated. - * It seem a bit messy with all the define, but it's really simple... */ - if( -#ifdef IW_WIRELESS_SPY - (lp->spy_data.spy_number > 0) || -#endif /* IW_WIRELESS_SPY */ -#ifdef HISTOGRAM - (lp->his_number > 0) || -#endif /* HISTOGRAM */ -#ifdef WAVELAN_ROAMING - (do_roaming) || -#endif /* WAVELAN_ROAMING */ - 0) - { - u_char stats[3]; /* Signal level, Noise level, Signal quality */ - - /* read signal level, silence level and signal quality bytes */ - fd_p = read_ringbuf(dev, (fd_p + 4) % RX_SIZE + RX_BASE, - stats, 3); -#ifdef DEBUG_RX_INFO - printk(KERN_DEBUG "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n", - dev->name, stats[0] & 0x3F, stats[1] & 0x3F, stats[2] & 0x0F); -#endif - -#ifdef WAVELAN_ROAMING - if(do_roaming) - if(WAVELAN_BEACON(skb->data)) - wl_roam_gather(dev, skb->data, stats); -#endif /* WAVELAN_ROAMING */ - -#ifdef WIRELESS_SPY - wl_spy_gather(dev, skb_mac_header(skb) + WAVELAN_ADDR_SIZE, stats); -#endif /* WIRELESS_SPY */ -#ifdef HISTOGRAM - wl_his_gather(dev, stats); -#endif /* HISTOGRAM */ - } - - /* - * Hand the packet to the Network Module - */ - netif_rx(skb); - - /* Keep stats up to date */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += sksize; - -#ifdef DEBUG_RX_TRACE - printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name); -#endif - return; -} - -/*------------------------------------------------------------------*/ -/* - * This routine is called by the interrupt handler to initiate a - * packet transfer from the card to the network interface layer above - * this driver. This routine checks if a buffer has been successfully - * received by the WaveLAN card. If so, the routine wv_packet_read is - * called to do the actual transfer of the card's data including the - * ethernet header into a packet consisting of an sk_buff chain. - * (called by wavelan_interrupt()) - * Note : the spinlock is already grabbed for us and irq are disabled. - */ -static void -wv_packet_rcv(struct net_device * dev) -{ - unsigned int base = dev->base_addr; - net_local * lp = netdev_priv(dev); - int newrfp; - int rp; - int len; - int f_start; - int status; - int i593_rfp; - int stat_ptr; - u_char c[4]; - -#ifdef DEBUG_RX_TRACE - printk(KERN_DEBUG "%s: ->wv_packet_rcv()\n", dev->name); -#endif - - /* Get the new receive frame pointer from the i82593 chip */ - outb(CR0_STATUS_2 | OP0_NOP, LCCR(base)); - i593_rfp = inb(LCSR(base)); - i593_rfp |= inb(LCSR(base)) << 8; - i593_rfp %= RX_SIZE; - - /* Get the new receive frame pointer from the WaveLAN card. - * It is 3 bytes more than the increment of the i82593 receive - * frame pointer, for each packet. This is because it includes the - * 3 roaming bytes added by the mmc. - */ - newrfp = inb(RPLL(base)); - newrfp |= inb(RPLH(base)) << 8; - newrfp %= RX_SIZE; - -#ifdef DEBUG_RX_INFO - printk(KERN_DEBUG "%s: wv_packet_rcv(): i593_rfp %d stop %d newrfp %d lp->rfp %d\n", - dev->name, i593_rfp, lp->stop, newrfp, lp->rfp); -#endif - -#ifdef DEBUG_RX_ERROR - /* If no new frame pointer... */ - if(lp->overrunning || newrfp == lp->rfp) - printk(KERN_INFO "%s: wv_packet_rcv(): no new frame: i593_rfp %d stop %d newrfp %d lp->rfp %d\n", - dev->name, i593_rfp, lp->stop, newrfp, lp->rfp); -#endif - - /* Read all frames (packets) received */ - while(newrfp != lp->rfp) - { - /* A frame is composed of the packet, followed by a status word, - * the length of the frame (word) and the mmc info (SNR & qual). - * It's because the length is at the end that we can only scan - * frames backward. */ - - /* Find the first frame by skipping backwards over the frames */ - rp = newrfp; /* End of last frame */ - while(((f_start = wv_start_of_frame(dev, rp, newrfp)) != lp->rfp) && - (f_start != -1)) - rp = f_start; - - /* If we had a problem */ - if(f_start == -1) - { -#ifdef DEBUG_RX_ERROR - printk(KERN_INFO "wavelan_cs: cannot find start of frame "); - printk(" i593_rfp %d stop %d newrfp %d lp->rfp %d\n", - i593_rfp, lp->stop, newrfp, lp->rfp); -#endif - lp->rfp = rp; /* Get to the last usable frame */ - continue; - } - - /* f_start point to the beggining of the first frame received - * and rp to the beggining of the next one */ - - /* Read status & length of the frame */ - stat_ptr = (rp - 7 + RX_SIZE) % RX_SIZE; - stat_ptr = read_ringbuf(dev, stat_ptr, c, 4); - status = c[0] | (c[1] << 8); - len = c[2] | (c[3] << 8); - - /* Check status */ - if((status & RX_RCV_OK) != RX_RCV_OK) - { - dev->stats.rx_errors++; - if(status & RX_NO_SFD) - dev->stats.rx_frame_errors++; - if(status & RX_CRC_ERR) - dev->stats.rx_crc_errors++; - if(status & RX_OVRRUN) - dev->stats.rx_over_errors++; - -#ifdef DEBUG_RX_FAIL - printk(KERN_DEBUG "%s: wv_packet_rcv(): packet not received ok, status = 0x%x\n", - dev->name, status); -#endif - } - else - /* Read the packet and transmit to Linux */ - wv_packet_read(dev, f_start, len - 2); - - /* One frame has been processed, skip it */ - lp->rfp = rp; - } - - /* - * Update the frame stop register, but set it to less than - * the full 8K to allow space for 3 bytes of signal strength - * per packet. - */ - lp->stop = (i593_rfp + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE; - outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base)); - outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base)); - outb(OP1_SWIT_TO_PORT_0, LCCR(base)); - -#ifdef DEBUG_RX_TRACE - printk(KERN_DEBUG "%s: <-wv_packet_rcv()\n", dev->name); -#endif -} - -/*********************** PACKET TRANSMISSION ***********************/ -/* - * This part deal with sending packet through the wavelan - * We copy the packet to the send buffer and then issue the send - * command to the i82593. The result of this operation will be - * checked in wavelan_interrupt() - */ - -/*------------------------------------------------------------------*/ -/* - * This routine fills in the appropriate registers and memory - * locations on the WaveLAN card and starts the card off on - * the transmit. - * (called in wavelan_packet_xmit()) - */ -static void -wv_packet_write(struct net_device * dev, - void * buf, - short length) -{ - net_local * lp = netdev_priv(dev); - unsigned int base = dev->base_addr; - unsigned long flags; - int clen = length; - register u_short xmtdata_base = TX_BASE; - -#ifdef DEBUG_TX_TRACE - printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, length); -#endif - - spin_lock_irqsave(&lp->spinlock, flags); - - /* Write the length of data buffer followed by the buffer */ - outb(xmtdata_base & 0xff, PIORL(base)); - outb(((xmtdata_base >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); - outb(clen & 0xff, PIOP(base)); /* lsb */ - outb(clen >> 8, PIOP(base)); /* msb */ - - /* Send the data */ - outsb(PIOP(base), buf, clen); - - /* Indicate end of transmit chain */ - outb(OP0_NOP, PIOP(base)); - /* josullvn@cs.cmu.edu: need to send a second NOP for alignment... */ - outb(OP0_NOP, PIOP(base)); - - /* Reset the transmit DMA pointer */ - hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); - hacr_write(base, HACR_DEFAULT); - /* Send the transmit command */ - wv_82593_cmd(dev, "wv_packet_write(): transmit", - OP0_TRANSMIT, SR0_NO_RESULT); - - /* Make sure the watchdog will keep quiet for a while */ - dev->trans_start = jiffies; - - /* Keep stats up to date */ - dev->stats.tx_bytes += length; - - spin_unlock_irqrestore(&lp->spinlock, flags); - -#ifdef DEBUG_TX_INFO - wv_packet_info((u_char *) buf, length, dev->name, "wv_packet_write"); -#endif /* DEBUG_TX_INFO */ - -#ifdef DEBUG_TX_TRACE - printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name); -#endif -} - -/*------------------------------------------------------------------*/ -/* - * This routine is called when we want to send a packet (NET3 callback) - * In this routine, we check if the harware is ready to accept - * the packet. We also prevent reentrance. Then, we call the function - * to send the packet... - */ -static netdev_tx_t -wavelan_packet_xmit(struct sk_buff * skb, - struct net_device * dev) -{ - net_local * lp = netdev_priv(dev); - unsigned long flags; - -#ifdef DEBUG_TX_TRACE - printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name, - (unsigned) skb); -#endif - - /* - * Block a timer-based transmit from overlapping a previous transmit. - * In other words, prevent reentering this routine. - */ - netif_stop_queue(dev); - - /* If somebody has asked to reconfigure the controller, - * we can do it now */ - if(lp->reconfig_82593) - { - spin_lock_irqsave(&lp->spinlock, flags); /* Disable interrupts */ - wv_82593_config(dev); - spin_unlock_irqrestore(&lp->spinlock, flags); /* Re-enable interrupts */ - /* Note : the configure procedure was totally synchronous, - * so the Tx buffer is now free */ - } - - /* Check if we need some padding */ - /* Note : on wireless the propagation time is in the order of 1us, - * and we don't have the Ethernet specific requirement of beeing - * able to detect collisions, therefore in theory we don't really - * need to pad. Jean II */ - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - - wv_packet_write(dev, skb->data, skb->len); - - dev_kfree_skb(skb); - -#ifdef DEBUG_TX_TRACE - printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name); -#endif - return NETDEV_TX_OK; -} - -/********************** HARDWARE CONFIGURATION **********************/ -/* - * This part do the real job of starting and configuring the hardware. - */ - -/*------------------------------------------------------------------*/ -/* - * Routine to initialize the Modem Management Controller. - * (called by wv_hw_config()) - */ -static int -wv_mmc_init(struct net_device * dev) -{ - unsigned int base = dev->base_addr; - psa_t psa; - mmw_t m; - int configured; - int i; /* Loop counter */ - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name); -#endif - - /* Read the parameter storage area */ - psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); - - /* - * Check the first three octets of the MAC addr for the manufacturer's code. - * Note: If you get the error message below, you've got a - * non-NCR/AT&T/Lucent PCMCIA cards, see wavelan_cs.h for detail on - * how to configure your card... - */ - for (i = 0; i < ARRAY_SIZE(MAC_ADDRESSES); i++) - if ((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) && - (psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) && - (psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2])) - break; - - /* If we have not found it... */ - if (i == ARRAY_SIZE(MAC_ADDRESSES)) - { -#ifdef DEBUG_CONFIG_ERRORS - printk(KERN_WARNING "%s: wv_mmc_init(): Invalid MAC address: %02X:%02X:%02X:...\n", - dev->name, psa.psa_univ_mac_addr[0], - psa.psa_univ_mac_addr[1], psa.psa_univ_mac_addr[2]); -#endif - return FALSE; - } - - /* Get the MAC address */ - memcpy(&dev->dev_addr[0], &psa.psa_univ_mac_addr[0], WAVELAN_ADDR_SIZE); - -#ifdef USE_PSA_CONFIG - configured = psa.psa_conf_status & 1; -#else - configured = 0; -#endif - - /* Is the PSA is not configured */ - if(!configured) - { - /* User will be able to configure NWID after (with iwconfig) */ - psa.psa_nwid[0] = 0; - psa.psa_nwid[1] = 0; - - /* As NWID is not set : no NWID checking */ - psa.psa_nwid_select = 0; - - /* Disable encryption */ - psa.psa_encryption_select = 0; - - /* Set to standard values - * 0x04 for AT, - * 0x01 for MCA, - * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document) - */ - if (psa.psa_comp_number & 1) - psa.psa_thr_pre_set = 0x01; - else - psa.psa_thr_pre_set = 0x04; - psa.psa_quality_thr = 0x03; - - /* It is configured */ - psa.psa_conf_status |= 1; - -#ifdef USE_PSA_CONFIG - /* Write the psa */ - psa_write(dev, (char *)psa.psa_nwid - (char *)&psa, - (unsigned char *)psa.psa_nwid, 4); - psa_write(dev, (char *)&psa.psa_thr_pre_set - (char *)&psa, - (unsigned char *)&psa.psa_thr_pre_set, 1); - psa_write(dev, (char *)&psa.psa_quality_thr - (char *)&psa, - (unsigned char *)&psa.psa_quality_thr, 1); - psa_write(dev, (char *)&psa.psa_conf_status - (char *)&psa, - (unsigned char *)&psa.psa_conf_status, 1); - /* update the Wavelan checksum */ - update_psa_checksum(dev); -#endif /* USE_PSA_CONFIG */ - } - - /* Zero the mmc structure */ - memset(&m, 0x00, sizeof(m)); - - /* Copy PSA info to the mmc */ - m.mmw_netw_id_l = psa.psa_nwid[1]; - m.mmw_netw_id_h = psa.psa_nwid[0]; - - if(psa.psa_nwid_select & 1) - m.mmw_loopt_sel = 0x00; - else - m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID; - - memcpy(&m.mmw_encr_key, &psa.psa_encryption_key, - sizeof(m.mmw_encr_key)); - - if(psa.psa_encryption_select) - m.mmw_encr_enable = MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE; - else - m.mmw_encr_enable = 0; - - m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F; - m.mmw_quality_thr = psa.psa_quality_thr & 0x0F; - - /* - * Set default modem control parameters. - * See NCR document 407-0024326 Rev. A. - */ - m.mmw_jabber_enable = 0x01; - m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN; - m.mmw_ifs = 0x20; - m.mmw_mod_delay = 0x04; - m.mmw_jam_time = 0x38; - - m.mmw_des_io_invert = 0; - m.mmw_freeze = 0; - m.mmw_decay_prm = 0; - m.mmw_decay_updat_prm = 0; - - /* Write all info to mmc */ - mmc_write(base, 0, (u_char *)&m, sizeof(m)); - - /* The following code start the modem of the 2.00 frequency - * selectable cards at power on. It's not strictly needed for the - * following boots... - * The original patch was by Joe Finney for the PCMCIA driver, but - * I've cleaned it a bit and add documentation. - * Thanks to Loeke Brederveld from Lucent for the info. - */ - - /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable) - * (does it work for everybody ? - especially old cards...) */ - /* Note : WFREQSEL verify that it is able to read from EEprom - * a sensible frequency (address 0x00) + that MMR_FEE_STATUS_ID - * is 0xA (Xilinx version) or 0xB (Ariadne version). - * My test is more crude but do work... */ - if(!(mmc_in(base, mmroff(0, mmr_fee_status)) & - (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) - { - /* We must download the frequency parameters to the - * synthetisers (from the EEprom - area 1) - * Note : as the EEprom is auto decremented, we set the end - * if the area... */ - m.mmw_fee_addr = 0x0F; - m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD; - mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m, - (unsigned char *)&m.mmw_fee_ctrl, 2); - - /* Wait until the download is finished */ - fee_wait(base, 100, 100); - -#ifdef DEBUG_CONFIG_INFO - /* The frequency was in the last word downloaded... */ - mmc_read(base, (char *)&m.mmw_fee_data_l - (char *)&m, - (unsigned char *)&m.mmw_fee_data_l, 2); - - /* Print some info for the user */ - printk(KERN_DEBUG "%s: Wavelan 2.00 recognised (frequency select) : Current frequency = %ld\n", - dev->name, - ((m.mmw_fee_data_h << 4) | - (m.mmw_fee_data_l >> 4)) * 5 / 2 + 24000L); -#endif - - /* We must now download the power adjust value (gain) to - * the synthetisers (from the EEprom - area 7 - DAC) */ - m.mmw_fee_addr = 0x61; - m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD; - mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m, - (unsigned char *)&m.mmw_fee_ctrl, 2); - - /* Wait until the download is finished */ - } /* if 2.00 card */ - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name); -#endif - return TRUE; -} - -/*------------------------------------------------------------------*/ -/* - * Routine to gracefully turn off reception, and wait for any commands - * to complete. - * (called in wv_ru_start() and wavelan_close() and wavelan_event()) - */ -static int -wv_ru_stop(struct net_device * dev) -{ - unsigned int base = dev->base_addr; - net_local * lp = netdev_priv(dev); - unsigned long flags; - int status; - int spin; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_ru_stop()\n", dev->name); -#endif - - spin_lock_irqsave(&lp->spinlock, flags); - - /* First, send the LAN controller a stop receive command */ - wv_82593_cmd(dev, "wv_graceful_shutdown(): stop-rcv", - OP0_STOP_RCV, SR0_NO_RESULT); - - /* Then, spin until the receive unit goes idle */ - spin = 300; - do - { - udelay(10); - outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); - status = inb(LCSR(base)); - } - while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin-- > 0)); - - /* Now, spin until the chip finishes executing its current command */ - do - { - udelay(10); - outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); - status = inb(LCSR(base)); - } - while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0)); - - spin_unlock_irqrestore(&lp->spinlock, flags); - - /* If there was a problem */ - if(spin <= 0) - { -#ifdef DEBUG_CONFIG_ERRORS - printk(KERN_INFO "%s: wv_ru_stop(): The chip doesn't want to stop...\n", - dev->name); -#endif - return FALSE; - } - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_ru_stop()\n", dev->name); -#endif - return TRUE; -} /* wv_ru_stop */ - -/*------------------------------------------------------------------*/ -/* - * This routine starts the receive unit running. First, it checks if - * the card is actually ready. Then the card is instructed to receive - * packets again. - * (called in wv_hw_reset() & wavelan_open()) - */ -static int -wv_ru_start(struct net_device * dev) -{ - unsigned int base = dev->base_addr; - net_local * lp = netdev_priv(dev); - unsigned long flags; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name); -#endif - - /* - * We need to start from a quiescent state. To do so, we could check - * if the card is already running, but instead we just try to shut - * it down. First, we disable reception (in case it was already enabled). - */ - if(!wv_ru_stop(dev)) - return FALSE; - - spin_lock_irqsave(&lp->spinlock, flags); - - /* Now we know that no command is being executed. */ - - /* Set the receive frame pointer and stop pointer */ - lp->rfp = 0; - outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base)); - - /* Reset ring management. This sets the receive frame pointer to 1 */ - outb(OP1_RESET_RING_MNGMT, LCCR(base)); - -#if 0 - /* XXX the i82593 manual page 6-4 seems to indicate that the stop register - should be set as below */ - /* outb(CR1_STOP_REG_UPDATE|((RX_SIZE - 0x40)>> RX_SIZE_SHIFT),LCCR(base));*/ -#elif 0 - /* but I set it 0 instead */ - lp->stop = 0; -#else - /* but I set it to 3 bytes per packet less than 8K */ - lp->stop = (0 + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE; -#endif - outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base)); - outb(OP1_INT_ENABLE, LCCR(base)); - outb(OP1_SWIT_TO_PORT_0, LCCR(base)); - - /* Reset receive DMA pointer */ - hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); - hacr_write_slow(base, HACR_DEFAULT); - - /* Receive DMA on channel 1 */ - wv_82593_cmd(dev, "wv_ru_start(): rcv-enable", - CR0_CHNL | OP0_RCV_ENABLE, SR0_NO_RESULT); - -#ifdef DEBUG_I82593_SHOW - { - int status; - int opri; - int spin = 10000; - - /* spin until the chip starts receiving */ - do - { - outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); - status = inb(LCSR(base)); - if(spin-- <= 0) - break; - } - while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_ACTIVE) && - ((status & SR3_RCV_STATE_MASK) != SR3_RCV_READY)); - printk(KERN_DEBUG "rcv status is 0x%x [i:%d]\n", - (status & SR3_RCV_STATE_MASK), i); - } -#endif - - spin_unlock_irqrestore(&lp->spinlock, flags); - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name); -#endif - return TRUE; -} - -/*------------------------------------------------------------------*/ -/* - * This routine does a standard config of the WaveLAN controller (i82593). - * In the ISA driver, this is integrated in wavelan_hardware_reset() - * (called by wv_hw_config(), wv_82593_reconfig() & wavelan_packet_xmit()) - */ -static int -wv_82593_config(struct net_device * dev) -{ - unsigned int base = dev->base_addr; - net_local * lp = netdev_priv(dev); - struct i82593_conf_block cfblk; - int ret = TRUE; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_82593_config()\n", dev->name); -#endif - - /* Create & fill i82593 config block - * - * Now conform to Wavelan document WCIN085B - */ - memset(&cfblk, 0x00, sizeof(struct i82593_conf_block)); - cfblk.d6mod = FALSE; /* Run in i82593 advanced mode */ - cfblk.fifo_limit = 5; /* = 56 B rx and 40 B tx fifo thresholds */ - cfblk.forgnesi = FALSE; /* 0=82C501, 1=AMD7992B compatibility */ - cfblk.fifo_32 = 1; - cfblk.throttle_enb = FALSE; - cfblk.contin = TRUE; /* enable continuous mode */ - cfblk.cntrxint = FALSE; /* enable continuous mode receive interrupts */ - cfblk.addr_len = WAVELAN_ADDR_SIZE; - cfblk.acloc = TRUE; /* Disable source addr insertion by i82593 */ - cfblk.preamb_len = 0; /* 2 bytes preamble (SFD) */ - cfblk.loopback = FALSE; - cfblk.lin_prio = 0; /* conform to 802.3 backoff algorithm */ - cfblk.exp_prio = 5; /* conform to 802.3 backoff algorithm */ - cfblk.bof_met = 1; /* conform to 802.3 backoff algorithm */ - cfblk.ifrm_spc = 0x20 >> 4; /* 32 bit times interframe spacing */ - cfblk.slottim_low = 0x20 >> 5; /* 32 bit times slot time */ - cfblk.slottim_hi = 0x0; - cfblk.max_retr = 15; - cfblk.prmisc = ((lp->promiscuous) ? TRUE: FALSE); /* Promiscuous mode */ - cfblk.bc_dis = FALSE; /* Enable broadcast reception */ - cfblk.crs_1 = TRUE; /* Transmit without carrier sense */ - cfblk.nocrc_ins = FALSE; /* i82593 generates CRC */ - cfblk.crc_1632 = FALSE; /* 32-bit Autodin-II CRC */ - cfblk.crs_cdt = FALSE; /* CD not to be interpreted as CS */ - cfblk.cs_filter = 0; /* CS is recognized immediately */ - cfblk.crs_src = FALSE; /* External carrier sense */ - cfblk.cd_filter = 0; /* CD is recognized immediately */ - cfblk.min_fr_len = ETH_ZLEN >> 2; /* Minimum frame length 64 bytes */ - cfblk.lng_typ = FALSE; /* Length field > 1500 = type field */ - cfblk.lng_fld = TRUE; /* Disable 802.3 length field check */ - cfblk.rxcrc_xf = TRUE; /* Don't transfer CRC to memory */ - cfblk.artx = TRUE; /* Disable automatic retransmission */ - cfblk.sarec = TRUE; /* Disable source addr trig of CD */ - cfblk.tx_jabber = TRUE; /* Disable jabber jam sequence */ - cfblk.hash_1 = FALSE; /* Use bits 0-5 in mc address hash */ - cfblk.lbpkpol = TRUE; /* Loopback pin active high */ - cfblk.fdx = FALSE; /* Disable full duplex operation */ - cfblk.dummy_6 = 0x3f; /* all ones */ - cfblk.mult_ia = FALSE; /* No multiple individual addresses */ - cfblk.dis_bof = FALSE; /* Disable the backoff algorithm ?! */ - cfblk.dummy_1 = TRUE; /* set to 1 */ - cfblk.tx_ifs_retrig = 3; /* Hmm... Disabled */ -#ifdef MULTICAST_ALL - cfblk.mc_all = (lp->allmulticast ? TRUE: FALSE); /* Allow all multicasts */ -#else - cfblk.mc_all = FALSE; /* No multicast all mode */ -#endif - cfblk.rcv_mon = 0; /* Monitor mode disabled */ - cfblk.frag_acpt = TRUE; /* Do not accept fragments */ - cfblk.tstrttrs = FALSE; /* No start transmission threshold */ - cfblk.fretx = TRUE; /* FIFO automatic retransmission */ - cfblk.syncrqs = FALSE; /* Synchronous DRQ deassertion... */ - cfblk.sttlen = TRUE; /* 6 byte status registers */ - cfblk.rx_eop = TRUE; /* Signal EOP on packet reception */ - cfblk.tx_eop = TRUE; /* Signal EOP on packet transmission */ - cfblk.rbuf_size = RX_SIZE>>11; /* Set receive buffer size */ - cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */ - -#ifdef DEBUG_I82593_SHOW - print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE, - 16, 1, &cfblk, sizeof(struct i82593_conf_block), false); -#endif - - /* Copy the config block to the i82593 */ - outb(TX_BASE & 0xff, PIORL(base)); - outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); - outb(sizeof(struct i82593_conf_block) & 0xff, PIOP(base)); /* lsb */ - outb(sizeof(struct i82593_conf_block) >> 8, PIOP(base)); /* msb */ - outsb(PIOP(base), (char *) &cfblk, sizeof(struct i82593_conf_block)); - - /* reset transmit DMA pointer */ - hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); - hacr_write(base, HACR_DEFAULT); - if(!wv_82593_cmd(dev, "wv_82593_config(): configure", - OP0_CONFIGURE, SR0_CONFIGURE_DONE)) - ret = FALSE; - - /* Initialize adapter's ethernet MAC address */ - outb(TX_BASE & 0xff, PIORL(base)); - outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); - outb(WAVELAN_ADDR_SIZE, PIOP(base)); /* byte count lsb */ - outb(0, PIOP(base)); /* byte count msb */ - outsb(PIOP(base), &dev->dev_addr[0], WAVELAN_ADDR_SIZE); - - /* reset transmit DMA pointer */ - hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); - hacr_write(base, HACR_DEFAULT); - if(!wv_82593_cmd(dev, "wv_82593_config(): ia-setup", - OP0_IA_SETUP, SR0_IA_SETUP_DONE)) - ret = FALSE; - -#ifdef WAVELAN_ROAMING - /* If roaming is enabled, join the "Beacon Request" multicast group... */ - /* But only if it's not in there already! */ - if(do_roaming) - dev_mc_add(dev,WAVELAN_BEACON_ADDRESS, WAVELAN_ADDR_SIZE, 1); -#endif /* WAVELAN_ROAMING */ - - /* If any multicast address to set */ - if(lp->mc_count) - { - struct dev_mc_list * dmi; - int addrs_len = WAVELAN_ADDR_SIZE * lp->mc_count; - -#ifdef DEBUG_CONFIG_INFO - printk(KERN_DEBUG "%s: wv_hw_config(): set %d multicast addresses:\n", - dev->name, lp->mc_count); - for(dmi=dev->mc_list; dmi; dmi=dmi->next) - printk(KERN_DEBUG " %pM\n", dmi->dmi_addr); -#endif - - /* Initialize adapter's ethernet multicast addresses */ - outb(TX_BASE & 0xff, PIORL(base)); - outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); - outb(addrs_len & 0xff, PIOP(base)); /* byte count lsb */ - outb((addrs_len >> 8), PIOP(base)); /* byte count msb */ - for(dmi=dev->mc_list; dmi; dmi=dmi->next) - outsb(PIOP(base), dmi->dmi_addr, dmi->dmi_addrlen); - - /* reset transmit DMA pointer */ - hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); - hacr_write(base, HACR_DEFAULT); - if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup", - OP0_MC_SETUP, SR0_MC_SETUP_DONE)) - ret = FALSE; - lp->mc_count = dev->mc_count; /* remember to avoid repeated reset */ - } - - /* Job done, clear the flag */ - lp->reconfig_82593 = FALSE; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_82593_config()\n", dev->name); -#endif - return(ret); -} - -/*------------------------------------------------------------------*/ -/* - * Read the Access Configuration Register, perform a software reset, - * and then re-enable the card's software. - * - * If I understand correctly : reset the pcmcia interface of the - * wavelan. - * (called by wv_config()) - */ -static int -wv_pcmcia_reset(struct net_device * dev) -{ - int i; - conf_reg_t reg = { 0, CS_READ, CISREG_COR, 0 }; - struct pcmcia_device * link = ((net_local *)netdev_priv(dev))->link; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_pcmcia_reset()\n", dev->name); -#endif - - i = pcmcia_access_configuration_register(link, ®); - if (i != 0) - { - cs_error(link, AccessConfigurationRegister, i); - return FALSE; - } - -#ifdef DEBUG_CONFIG_INFO - printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n", - dev->name, (u_int) reg.Value); -#endif - - reg.Action = CS_WRITE; - reg.Value = reg.Value | COR_SW_RESET; - i = pcmcia_access_configuration_register(link, ®); - if (i != 0) - { - cs_error(link, AccessConfigurationRegister, i); - return FALSE; - } - - reg.Action = CS_WRITE; - reg.Value = COR_LEVEL_IRQ | COR_CONFIG; - i = pcmcia_access_configuration_register(link, ®); - if (i != 0) - { - cs_error(link, AccessConfigurationRegister, i); - return FALSE; - } - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name); -#endif - return TRUE; -} - -/*------------------------------------------------------------------*/ -/* - * wavelan_hw_config() is called after a CARD_INSERTION event is - * received, to configure the wavelan hardware. - * Note that the reception will be enabled in wavelan->open(), so the - * device is configured but idle... - * Performs the following actions: - * 1. A pcmcia software reset (using wv_pcmcia_reset()) - * 2. A power reset (reset DMA) - * 3. Reset the LAN controller - * 4. Initialize the radio modem (using wv_mmc_init) - * 5. Configure LAN controller (using wv_82593_config) - * 6. Perform a diagnostic on the LAN controller - * (called by wavelan_event() & wv_hw_reset()) - */ -static int -wv_hw_config(struct net_device * dev) -{ - net_local * lp = netdev_priv(dev); - unsigned int base = dev->base_addr; - unsigned long flags; - int ret = FALSE; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name); -#endif - - /* compile-time check the sizes of structures */ - BUILD_BUG_ON(sizeof(psa_t) != PSA_SIZE); - BUILD_BUG_ON(sizeof(mmw_t) != MMW_SIZE); - BUILD_BUG_ON(sizeof(mmr_t) != MMR_SIZE); - - /* Reset the pcmcia interface */ - if(wv_pcmcia_reset(dev) == FALSE) - return FALSE; - - /* Disable interrupts */ - spin_lock_irqsave(&lp->spinlock, flags); - - /* Disguised goto ;-) */ - do - { - /* Power UP the module + reset the modem + reset host adapter - * (in fact, reset DMA channels) */ - hacr_write_slow(base, HACR_RESET); - hacr_write(base, HACR_DEFAULT); - - /* Check if the module has been powered up... */ - if(hasr_read(base) & HASR_NO_CLK) - { -#ifdef DEBUG_CONFIG_ERRORS - printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n", - dev->name); -#endif - break; - } - - /* initialize the modem */ - if(wv_mmc_init(dev) == FALSE) - { -#ifdef DEBUG_CONFIG_ERRORS - printk(KERN_WARNING "%s: wv_hw_config(): Can't configure the modem\n", - dev->name); -#endif - break; - } - - /* reset the LAN controller (i82593) */ - outb(OP0_RESET, LCCR(base)); - mdelay(1); /* A bit crude ! */ - - /* Initialize the LAN controller */ - if(wv_82593_config(dev) == FALSE) - { -#ifdef DEBUG_CONFIG_ERRORS - printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n", - dev->name); -#endif - break; - } - - /* Diagnostic */ - if(wv_diag(dev) == FALSE) - { -#ifdef DEBUG_CONFIG_ERRORS - printk(KERN_INFO "%s: wv_hw_config(): i82593 diagnostic failed\n", - dev->name); -#endif - break; - } - - /* - * insert code for loopback test here - */ - - /* The device is now configured */ - lp->configured = 1; - ret = TRUE; - } - while(0); - - /* Re-enable interrupts */ - spin_unlock_irqrestore(&lp->spinlock, flags); - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_hw_config()\n", dev->name); -#endif - return(ret); -} - -/*------------------------------------------------------------------*/ -/* - * Totally reset the wavelan and restart it. - * Performs the following actions: - * 1. Call wv_hw_config() - * 2. Start the LAN controller's receive unit - * (called by wavelan_event(), wavelan_watchdog() and wavelan_open()) - */ -static void -wv_hw_reset(struct net_device * dev) -{ - net_local * lp = netdev_priv(dev); - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: ->wv_hw_reset()\n", dev->name); -#endif - - lp->nresets++; - lp->configured = 0; - - /* Call wv_hw_config() for most of the reset & init stuff */ - if(wv_hw_config(dev) == FALSE) - return; - - /* start receive unit */ - wv_ru_start(dev); - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name); -#endif -} - -/*------------------------------------------------------------------*/ -/* - * wv_pcmcia_config() is called after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet - * device available to the system. - * (called by wavelan_event()) - */ -static int -wv_pcmcia_config(struct pcmcia_device * link) -{ - struct net_device * dev = (struct net_device *) link->priv; - int i; - win_req_t req; - memreq_t mem; - net_local * lp = netdev_priv(dev); - - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "->wv_pcmcia_config(0x%p)\n", link); -#endif - - do - { - i = pcmcia_request_io(link, &link->io); - if (i != 0) - { - cs_error(link, RequestIO, i); - break; - } - - /* - * Now allocate an interrupt line. Note that this does not - * actually assign a handler to the interrupt. - */ - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) - { - cs_error(link, RequestIRQ, i); - break; - } - - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping. - */ - link->conf.ConfigIndex = 1; - i = pcmcia_request_configuration(link, &link->conf); - if (i != 0) - { - cs_error(link, RequestConfiguration, i); - break; - } - - /* - * Allocate a small memory window. Note that the struct pcmcia_device - * structure provides space for one window handle -- if your - * device needs several windows, you'll need to keep track of - * the handles in your private data structure, link->priv. - */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = mem_speed; - i = pcmcia_request_window(&link, &req, &link->win); - if (i != 0) - { - cs_error(link, RequestWindow, i); - break; - } - - lp->mem = ioremap(req.Base, req.Size); - dev->mem_start = (u_long)lp->mem; - dev->mem_end = dev->mem_start + req.Size; - - mem.CardOffset = 0; mem.Page = 0; - i = pcmcia_map_mem_page(link->win, &mem); - if (i != 0) - { - cs_error(link, MapMemPage, i); - break; - } - - /* Feed device with this info... */ - dev->irq = link->irq.AssignedIRQ; - dev->base_addr = link->io.BasePort1; - netif_start_queue(dev); - -#ifdef DEBUG_CONFIG_INFO - printk(KERN_DEBUG "wv_pcmcia_config: MEMSTART %p IRQ %d IOPORT 0x%x\n", - lp->mem, dev->irq, (u_int) dev->base_addr); -#endif - - SET_NETDEV_DEV(dev, &handle_to_dev(link)); - i = register_netdev(dev); - if(i != 0) - { -#ifdef DEBUG_CONFIG_ERRORS - printk(KERN_INFO "wv_pcmcia_config(): register_netdev() failed\n"); -#endif - break; - } - } - while(0); /* Humm... Disguised goto !!! */ - - /* If any step failed, release any partially configured state */ - if(i != 0) - { - wv_pcmcia_release(link); - return FALSE; - } - - strcpy(((net_local *) netdev_priv(dev))->node.dev_name, dev->name); - link->dev_node = &((net_local *) netdev_priv(dev))->node; - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "<-wv_pcmcia_config()\n"); -#endif - return TRUE; -} - -/*------------------------------------------------------------------*/ -/* - * After a card is removed, wv_pcmcia_release() will unregister the net - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ -static void -wv_pcmcia_release(struct pcmcia_device *link) -{ - struct net_device * dev = (struct net_device *) link->priv; - net_local * lp = netdev_priv(dev); - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: -> wv_pcmcia_release(0x%p)\n", dev->name, link); -#endif - - iounmap(lp->mem); - pcmcia_disable_device(link); - -#ifdef DEBUG_CONFIG_TRACE - printk(KERN_DEBUG "%s: <- wv_pcmcia_release()\n", dev->name); -#endif -} - -/************************ INTERRUPT HANDLING ************************/ - -/* - * This function is the interrupt handler for the WaveLAN card. This - * routine will be called whenever: - * 1. A packet is received. - * 2. A packet has successfully been transferred and the unit is - * ready to transmit another packet. - * 3. A command has completed execution. - */ -static irqreturn_t -wavelan_interrupt(int irq, - void * dev_id) -{ - struct net_device * dev = dev_id; - net_local * lp; - unsigned int base; - int status0; - u_int tx_status; - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name); -#endif - - lp = netdev_priv(dev); - base = dev->base_addr; - -#ifdef DEBUG_INTERRUPT_INFO - /* Check state of our spinlock (it should be cleared) */ - if(spin_is_locked(&lp->spinlock)) - printk(KERN_DEBUG - "%s: wavelan_interrupt(): spinlock is already locked !!!\n", - dev->name); -#endif - - /* Prevent reentrancy. We need to do that because we may have - * multiple interrupt handler running concurently. - * It is safe because interrupts are disabled before aquiring - * the spinlock. */ - spin_lock(&lp->spinlock); - - /* Treat all pending interrupts */ - while(1) - { - /* ---------------- INTERRUPT CHECKING ---------------- */ - /* - * Look for the interrupt and verify the validity - */ - outb(CR0_STATUS_0 | OP0_NOP, LCCR(base)); - status0 = inb(LCSR(base)); - -#ifdef DEBUG_INTERRUPT_INFO - printk(KERN_DEBUG "status0 0x%x [%s => 0x%x]", status0, - (status0&SR0_INTERRUPT)?"int":"no int",status0&~SR0_INTERRUPT); - if(status0&SR0_INTERRUPT) - { - printk(" [%s => %d]\n", (status0 & SR0_CHNL) ? "chnl" : - ((status0 & SR0_EXECUTION) ? "cmd" : - ((status0 & SR0_RECEPTION) ? "recv" : "unknown")), - (status0 & SR0_EVENT_MASK)); - } - else - printk("\n"); -#endif - - /* Return if no actual interrupt from i82593 (normal exit) */ - if(!(status0 & SR0_INTERRUPT)) - break; - - /* If interrupt is both Rx and Tx or none... - * This code in fact is there to catch the spurious interrupt - * when you remove the wavelan pcmcia card from the socket */ - if(((status0 & SR0_BOTH_RX_TX) == SR0_BOTH_RX_TX) || - ((status0 & SR0_BOTH_RX_TX) == 0x0)) - { -#ifdef DEBUG_INTERRUPT_INFO - printk(KERN_INFO "%s: wv_interrupt(): bogus interrupt (or from dead card) : %X\n", - dev->name, status0); -#endif - /* Acknowledge the interrupt */ - outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); - break; - } - - /* ----------------- RECEIVING PACKET ----------------- */ - /* - * When the wavelan signal the reception of a new packet, - * we call wv_packet_rcv() to copy if from the buffer and - * send it to NET3 - */ - if(status0 & SR0_RECEPTION) - { -#ifdef DEBUG_INTERRUPT_INFO - printk(KERN_DEBUG "%s: wv_interrupt(): receive\n", dev->name); -#endif - - if((status0 & SR0_EVENT_MASK) == SR0_STOP_REG_HIT) - { -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO "%s: wv_interrupt(): receive buffer overflow\n", - dev->name); -#endif - dev->stats.rx_over_errors++; - lp->overrunning = 1; - } - - /* Get the packet */ - wv_packet_rcv(dev); - lp->overrunning = 0; - - /* Acknowledge the interrupt */ - outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); - continue; - } - - /* ---------------- COMMAND COMPLETION ---------------- */ - /* - * Interrupts issued when the i82593 has completed a command. - * Most likely : transmission done - */ - - /* If a transmission has been done */ - if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE || - (status0 & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE || - (status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE) - { -#ifdef DEBUG_TX_ERROR - if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE) - printk(KERN_INFO "%s: wv_interrupt(): packet transmitted without CRC.\n", - dev->name); -#endif - - /* Get transmission status */ - tx_status = inb(LCSR(base)); - tx_status |= (inb(LCSR(base)) << 8); -#ifdef DEBUG_INTERRUPT_INFO - printk(KERN_DEBUG "%s: wv_interrupt(): transmission done\n", - dev->name); - { - u_int rcv_bytes; - u_char status3; - rcv_bytes = inb(LCSR(base)); - rcv_bytes |= (inb(LCSR(base)) << 8); - status3 = inb(LCSR(base)); - printk(KERN_DEBUG "tx_status 0x%02x rcv_bytes 0x%02x status3 0x%x\n", - tx_status, rcv_bytes, (u_int) status3); - } -#endif - /* Check for possible errors */ - if((tx_status & TX_OK) != TX_OK) - { - dev->stats.tx_errors++; - - if(tx_status & TX_FRTL) - { -#ifdef DEBUG_TX_ERROR - printk(KERN_INFO "%s: wv_interrupt(): frame too long\n", - dev->name); -#endif - } - if(tx_status & TX_UND_RUN) - { -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG "%s: wv_interrupt(): DMA underrun\n", - dev->name); -#endif - dev->stats.tx_aborted_errors++; - } - if(tx_status & TX_LOST_CTS) - { -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG "%s: wv_interrupt(): no CTS\n", dev->name); -#endif - dev->stats.tx_carrier_errors++; - } - if(tx_status & TX_LOST_CRS) - { -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG "%s: wv_interrupt(): no carrier\n", - dev->name); -#endif - dev->stats.tx_carrier_errors++; - } - if(tx_status & TX_HRT_BEAT) - { -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG "%s: wv_interrupt(): heart beat\n", dev->name); -#endif - dev->stats.tx_heartbeat_errors++; - } - if(tx_status & TX_DEFER) - { -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG "%s: wv_interrupt(): channel jammed\n", - dev->name); -#endif - } - /* Ignore late collisions since they're more likely to happen - * here (the WaveLAN design prevents the LAN controller from - * receiving while it is transmitting). We take action only when - * the maximum retransmit attempts is exceeded. - */ - if(tx_status & TX_COLL) - { - if(tx_status & TX_MAX_COL) - { -#ifdef DEBUG_TX_FAIL - printk(KERN_DEBUG "%s: wv_interrupt(): channel congestion\n", - dev->name); -#endif - if(!(tx_status & TX_NCOL_MASK)) - { - dev->stats.collisions += 0x10; - } - } - } - } /* if(!(tx_status & TX_OK)) */ - - dev->stats.collisions += (tx_status & TX_NCOL_MASK); - dev->stats.tx_packets++; - - netif_wake_queue(dev); - outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */ - } - else /* if interrupt = transmit done or retransmit done */ - { -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO "wavelan_cs: unknown interrupt, status0 = %02x\n", - status0); -#endif - outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */ - } - } /* while(1) */ - - spin_unlock(&lp->spinlock); - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name); -#endif - - /* We always return IRQ_HANDLED, because we will receive empty - * interrupts under normal operations. Anyway, it doesn't matter - * as we are dealing with an ISA interrupt that can't be shared. - * - * Explanation : under heavy receive, the following happens : - * ->wavelan_interrupt() - * (status0 & SR0_INTERRUPT) != 0 - * ->wv_packet_rcv() - * (status0 & SR0_INTERRUPT) != 0 - * ->wv_packet_rcv() - * (status0 & SR0_INTERRUPT) == 0 // i.e. no more event - * <-wavelan_interrupt() - * ->wavelan_interrupt() - * (status0 & SR0_INTERRUPT) == 0 // i.e. empty interrupt - * <-wavelan_interrupt() - * Jean II */ - return IRQ_HANDLED; -} /* wv_interrupt */ - -/*------------------------------------------------------------------*/ -/* - * Watchdog: when we start a transmission, a timer is set for us in the - * kernel. If the transmission completes, this timer is disabled. If - * the timer expires, we are called and we try to unlock the hardware. - * - * Note : This watchdog is move clever than the one in the ISA driver, - * because it try to abort the current command before reseting - * everything... - * On the other hand, it's a bit simpler, because we don't have to - * deal with the multiple Tx buffers... - */ -static void -wavelan_watchdog(struct net_device * dev) -{ - net_local * lp = netdev_priv(dev); - unsigned int base = dev->base_addr; - unsigned long flags; - int aborted = FALSE; - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name); -#endif - -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n", - dev->name); -#endif - - spin_lock_irqsave(&lp->spinlock, flags); - - /* Ask to abort the current command */ - outb(OP0_ABORT, LCCR(base)); - - /* Wait for the end of the command (a bit hackish) */ - if(wv_82593_cmd(dev, "wavelan_watchdog(): abort", - OP0_NOP | CR0_STATUS_3, SR0_EXECUTION_ABORTED)) - aborted = TRUE; - - /* Release spinlock here so that wv_hw_reset() can grab it */ - spin_unlock_irqrestore(&lp->spinlock, flags); - - /* Check if we were successful in aborting it */ - if(!aborted) - { - /* It seem that it wasn't enough */ -#ifdef DEBUG_INTERRUPT_ERROR - printk(KERN_INFO "%s: wavelan_watchdog: abort failed, trying reset\n", - dev->name); -#endif - wv_hw_reset(dev); - } - -#ifdef DEBUG_PSA_SHOW - { - psa_t psa; - psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); - wv_psa_show(&psa); - } -#endif -#ifdef DEBUG_MMC_SHOW - wv_mmc_show(dev); -#endif -#ifdef DEBUG_I82593_SHOW - wv_ru_show(dev); -#endif - - /* We are no more waiting for something... */ - netif_wake_queue(dev); - -#ifdef DEBUG_INTERRUPT_TRACE - printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name); -#endif -} - -/********************* CONFIGURATION CALLBACKS *********************/ -/* - * Here are the functions called by the pcmcia package (cardmgr) and - * linux networking (NET3) for initialization, configuration and - * deinstallations of the Wavelan Pcmcia Hardware. - */ - -/*------------------------------------------------------------------*/ -/* - * Configure and start up the WaveLAN PCMCIA adaptor. - * Called by NET3 when it "open" the device. - */ -static int -wavelan_open(struct net_device * dev) -{ - net_local * lp = netdev_priv(dev); - struct pcmcia_device * link = lp->link; - unsigned int base = dev->base_addr; - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name, - (unsigned int) dev); -#endif - - /* Check if the modem is powered up (wavelan_close() power it down */ - if(hasr_read(base) & HASR_NO_CLK) - { - /* Power up (power up time is 250us) */ - hacr_write(base, HACR_DEFAULT); - - /* Check if the module has been powered up... */ - if(hasr_read(base) & HASR_NO_CLK) - { -#ifdef DEBUG_CONFIG_ERRORS - printk(KERN_WARNING "%s: wavelan_open(): modem not connected\n", - dev->name); -#endif - return FALSE; - } - } - - /* Start reception and declare the driver ready */ - if(!lp->configured) - return FALSE; - if(!wv_ru_start(dev)) - wv_hw_reset(dev); /* If problem : reset */ - netif_start_queue(dev); - - /* Mark the device as used */ - link->open++; - -#ifdef WAVELAN_ROAMING - if(do_roaming) - wv_roam_init(dev); -#endif /* WAVELAN_ROAMING */ - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name); -#endif - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Shutdown the WaveLAN PCMCIA adaptor. - * Called by NET3 when it "close" the device. - */ -static int -wavelan_close(struct net_device * dev) -{ - struct pcmcia_device * link = ((net_local *)netdev_priv(dev))->link; - unsigned int base = dev->base_addr; - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name, - (unsigned int) dev); -#endif - - /* If the device isn't open, then nothing to do */ - if(!link->open) - { -#ifdef DEBUG_CONFIG_INFO - printk(KERN_DEBUG "%s: wavelan_close(): device not open\n", dev->name); -#endif - return 0; - } - -#ifdef WAVELAN_ROAMING - /* Cleanup of roaming stuff... */ - if(do_roaming) - wv_roam_cleanup(dev); -#endif /* WAVELAN_ROAMING */ - - link->open--; - - /* If the card is still present */ - if(netif_running(dev)) - { - netif_stop_queue(dev); - - /* Stop receiving new messages and wait end of transmission */ - wv_ru_stop(dev); - - /* Power down the module */ - hacr_write(base, HACR_DEFAULT & (~HACR_PWR_STAT)); - } - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name); -#endif - return 0; -} - -static const struct net_device_ops wavelan_netdev_ops = { - .ndo_open = wavelan_open, - .ndo_stop = wavelan_close, - .ndo_start_xmit = wavelan_packet_xmit, - .ndo_set_multicast_list = wavelan_set_multicast_list, -#ifdef SET_MAC_ADDRESS - .ndo_set_mac_address = wavelan_set_mac_address, -#endif - .ndo_tx_timeout = wavelan_watchdog, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, -}; - -/*------------------------------------------------------------------*/ -/* - * wavelan_attach() creates an "instance" of the driver, allocating - * local data structures for one device (one interface). The device - * is registered with Card Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a - * card insertion event. - */ -static int -wavelan_probe(struct pcmcia_device *p_dev) -{ - struct net_device * dev; /* Interface generic data */ - net_local * lp; /* Interface specific data */ - int ret; - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "-> wavelan_attach()\n"); -#endif - - /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 8; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 3; - - /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; - p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; - p_dev->irq.Handler = wavelan_interrupt; - - /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - - /* Allocate the generic data structure */ - dev = alloc_etherdev(sizeof(net_local)); - if (!dev) - return -ENOMEM; - - p_dev->priv = p_dev->irq.Instance = dev; - - lp = netdev_priv(dev); - - /* Init specific data */ - lp->configured = 0; - lp->reconfig_82593 = FALSE; - lp->nresets = 0; - /* Multicast stuff */ - lp->promiscuous = 0; - lp->allmulticast = 0; - lp->mc_count = 0; - - /* Init spinlock */ - spin_lock_init(&lp->spinlock); - - /* back links */ - lp->dev = dev; - - /* wavelan NET3 callbacks */ - dev->netdev_ops = &wavelan_netdev_ops; - dev->watchdog_timeo = WATCHDOG_JIFFIES; - SET_ETHTOOL_OPS(dev, &ops); - - dev->wireless_handlers = &wavelan_handler_def; - lp->wireless_data.spy_data = &lp->spy_data; - dev->wireless_data = &lp->wireless_data; - - /* Other specific data */ - dev->mtu = WAVELAN_MTU; - - ret = wv_pcmcia_config(p_dev); - if (ret) - return ret; - - ret = wv_hw_config(dev); - if (ret) { - dev->irq = 0; - pcmcia_disable_device(p_dev); - return ret; - } - - wv_init_info(dev); - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "<- wavelan_attach()\n"); -#endif - - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ -static void -wavelan_detach(struct pcmcia_device *link) -{ -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "-> wavelan_detach(0x%p)\n", link); -#endif - - /* Some others haven't done their job : give them another chance */ - wv_pcmcia_release(link); - - /* Free pieces */ - if(link->priv) - { - struct net_device * dev = (struct net_device *) link->priv; - - /* Remove ourselves from the kernel list of ethernet devices */ - /* Warning : can't be called from interrupt, timer or wavelan_close() */ - if (link->dev_node) - unregister_netdev(dev); - link->dev_node = NULL; - ((net_local *)netdev_priv(dev))->link = NULL; - ((net_local *)netdev_priv(dev))->dev = NULL; - free_netdev(dev); - } - -#ifdef DEBUG_CALLBACK_TRACE - printk(KERN_DEBUG "<- wavelan_detach()\n"); -#endif -} - -static int wavelan_suspend(struct pcmcia_device *link) -{ - struct net_device * dev = (struct net_device *) link->priv; - - /* NB: wavelan_close will be called, but too late, so we are - * obliged to close nicely the wavelan here. David, could you - * close the device before suspending them ? And, by the way, - * could you, on resume, add a "route add -net ..." after the - * ifconfig up ? Thanks... */ - - /* Stop receiving new messages and wait end of transmission */ - wv_ru_stop(dev); - - if (link->open) - netif_device_detach(dev); - - /* Power down the module */ - hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT)); - - return 0; -} - -static int wavelan_resume(struct pcmcia_device *link) -{ - struct net_device * dev = (struct net_device *) link->priv; - - if (link->open) { - wv_hw_reset(dev); - netif_device_attach(dev); - } - - return 0; -} - - -static struct pcmcia_device_id wavelan_ids[] = { - PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975), - PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06), - PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/PCMCIA", 0x23eb9949, 0x1bc50975), - PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/PCMCIA", 0x24358cd4, 0x1bc50975), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, wavelan_ids); - -static struct pcmcia_driver wavelan_driver = { - .owner = THIS_MODULE, - .drv = { - .name = "wavelan_cs", - }, - .probe = wavelan_probe, - .remove = wavelan_detach, - .id_table = wavelan_ids, - .suspend = wavelan_suspend, - .resume = wavelan_resume, -}; - -static int __init -init_wavelan_cs(void) -{ - return pcmcia_register_driver(&wavelan_driver); -} - -static void __exit -exit_wavelan_cs(void) -{ - pcmcia_unregister_driver(&wavelan_driver); -} - -module_init(init_wavelan_cs); -module_exit(exit_wavelan_cs); diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/net/wireless/wavelan_cs.h deleted file mode 100644 index 2e4bfe4147c6..000000000000 --- a/drivers/net/wireless/wavelan_cs.h +++ /dev/null @@ -1,386 +0,0 @@ -/* - * Wavelan Pcmcia driver - * - * Jean II - HPLB '96 - * - * Reorganization and extension of the driver. - * Original copyright follow. See wavelan_cs.h for details. - * - * This file contain the declarations of the Wavelan hardware. Note that - * the Pcmcia Wavelan include a i82593 controller (see definitions in - * file i82593.h). - * - * The main difference between the pcmcia hardware and the ISA one is - * the Ethernet Controller (i82593 instead of i82586). The i82593 allow - * only one send buffer. The PSA (Parameter Storage Area : EEprom for - * permanent storage of various info) is memory mapped, but not the - * MMI (Modem Management Interface). - */ - -/* - * Definitions for the AT&T GIS (formerly NCR) WaveLAN PCMCIA card: - * An Ethernet-like radio transceiver controlled by an Intel 82593 - * coprocessor. - * - * - **************************************************************************** - * Copyright 1995 - * Anthony D. Joseph - * Massachusetts Institute of Technology - * - * Permission to use, copy, modify, and distribute this program - * for any purpose and without fee is hereby granted, provided - * that this copyright and permission notice appear on all copies - * and supporting documentation, the name of M.I.T. not be used - * in advertising or publicity pertaining to distribution of the - * program without specific prior permission, and notice be given - * in supporting documentation that copying and distribution is - * by permission of M.I.T. M.I.T. makes no representations about - * the suitability of this software for any purpose. It is pro- - * vided "as is" without express or implied warranty. - **************************************************************************** - * - * - * Credits: - * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht for - * providing extremely useful information about WaveLAN PCMCIA hardware - * - * This driver is based upon several other drivers, in particular: - * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter - * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter - * Anders Klemets' PCMCIA WaveLAN adapter driver - * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter - */ - -#ifndef _WAVELAN_CS_H -#define _WAVELAN_CS_H - -/************************** MAGIC NUMBERS ***************************/ - -/* The detection of the wavelan card is made by reading the MAC address - * from the card and checking it. If you have a non AT&T product (OEM, - * like DEC RoamAbout, or Digital Ocean, Epson, ...), you must modify this - * part to accommodate your hardware... - */ -static const unsigned char MAC_ADDRESSES[][3] = -{ - { 0x08, 0x00, 0x0E }, /* AT&T Wavelan (standard) & DEC RoamAbout */ - { 0x08, 0x00, 0x6A }, /* AT&T Wavelan (alternate) */ - { 0x00, 0x00, 0xE1 }, /* Hitachi Wavelan */ - { 0x00, 0x60, 0x1D } /* Lucent Wavelan (another one) */ - /* Add your card here and send me the patch ! */ -}; - -/* - * Constants used to convert channels to frequencies - */ - -/* Frequency available in the 2.0 modem, in units of 250 kHz - * (as read in the offset register of the dac area). - * Used to map channel numbers used by `wfreqsel' to frequencies - */ -static const short channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8, - 0xD0, 0xF0, 0xF8, 0x150 }; - -/* Frequencies of the 1.0 modem (fixed frequencies). - * Use to map the PSA `subband' to a frequency - * Note : all frequencies apart from the first one need to be multiplied by 10 - */ -static const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 }; - - -/*************************** PC INTERFACE ****************************/ - -/* WaveLAN host interface definitions */ - -#define LCCR(base) (base) /* LAN Controller Command Register */ -#define LCSR(base) (base) /* LAN Controller Status Register */ -#define HACR(base) (base+0x1) /* Host Adapter Command Register */ -#define HASR(base) (base+0x1) /* Host Adapter Status Register */ -#define PIORL(base) (base+0x2) /* Program I/O Register Low */ -#define RPLL(base) (base+0x2) /* Receive Pointer Latched Low */ -#define PIORH(base) (base+0x3) /* Program I/O Register High */ -#define RPLH(base) (base+0x3) /* Receive Pointer Latched High */ -#define PIOP(base) (base+0x4) /* Program I/O Port */ -#define MMR(base) (base+0x6) /* MMI Address Register */ -#define MMD(base) (base+0x7) /* MMI Data Register */ - -/* Host Adaptor Command Register bit definitions */ - -#define HACR_LOF (1 << 3) /* Lock Out Flag, toggle every 250ms */ -#define HACR_PWR_STAT (1 << 4) /* Power State, 1=active, 0=sleep */ -#define HACR_TX_DMA_RESET (1 << 5) /* Reset transmit DMA ptr on high */ -#define HACR_RX_DMA_RESET (1 << 6) /* Reset receive DMA ptr on high */ -#define HACR_ROM_WEN (1 << 7) /* EEPROM write enabled when true */ - -#define HACR_RESET (HACR_TX_DMA_RESET | HACR_RX_DMA_RESET) -#define HACR_DEFAULT (HACR_PWR_STAT) - -/* Host Adapter Status Register bit definitions */ - -#define HASR_MMI_BUSY (1 << 2) /* MMI is busy when true */ -#define HASR_LOF (1 << 3) /* Lock out flag status */ -#define HASR_NO_CLK (1 << 4) /* active when modem not connected */ - -/* Miscellaneous bit definitions */ - -#define PIORH_SEL_TX (1 << 5) /* PIOR points to 0=rx/1=tx buffer */ -#define MMR_MMI_WR (1 << 0) /* Next MMI cycle is 0=read, 1=write */ -#define PIORH_MASK 0x1f /* only low 5 bits are significant */ -#define RPLH_MASK 0x1f /* only low 5 bits are significant */ -#define MMI_ADDR_MASK 0x7e /* Bits 1-6 of MMR are significant */ - -/* Attribute Memory map */ - -#define CIS_ADDR 0x0000 /* Card Information Status Register */ -#define PSA_ADDR 0x0e00 /* Parameter Storage Area address */ -#define EEPROM_ADDR 0x1000 /* EEPROM address (unused ?) */ -#define COR_ADDR 0x4000 /* Configuration Option Register */ - -/* Configuration Option Register bit definitions */ - -#define COR_CONFIG (1 << 0) /* Config Index, 0 when unconfigured */ -#define COR_SW_RESET (1 << 7) /* Software Reset on true */ -#define COR_LEVEL_IRQ (1 << 6) /* Level IRQ */ - -/* Local Memory map */ - -#define RX_BASE 0x0000 /* Receive memory, 8 kB */ -#define TX_BASE 0x2000 /* Transmit memory, 2 kB */ -#define UNUSED_BASE 0x2800 /* Unused, 22 kB */ -#define RX_SIZE (TX_BASE-RX_BASE) /* Size of receive area */ -#define RX_SIZE_SHIFT 6 /* Bits to shift in stop register */ - -#define TRUE 1 -#define FALSE 0 - -#define MOD_ENAL 1 -#define MOD_PROM 2 - -/* Size of a MAC address */ -#define WAVELAN_ADDR_SIZE 6 - -/* Maximum size of Wavelan packet */ -#define WAVELAN_MTU 1500 - -#define MAXDATAZ (6 + 6 + 2 + WAVELAN_MTU) - -/********************** PARAMETER STORAGE AREA **********************/ - -/* - * Parameter Storage Area (PSA). - */ -typedef struct psa_t psa_t; -struct psa_t -{ - /* For the PCMCIA Adapter, locations 0x00-0x0F are unused and fixed at 00 */ - unsigned char psa_io_base_addr_1; /* [0x00] Base address 1 ??? */ - unsigned char psa_io_base_addr_2; /* [0x01] Base address 2 */ - unsigned char psa_io_base_addr_3; /* [0x02] Base address 3 */ - unsigned char psa_io_base_addr_4; /* [0x03] Base address 4 */ - unsigned char psa_rem_boot_addr_1; /* [0x04] Remote Boot Address 1 */ - unsigned char psa_rem_boot_addr_2; /* [0x05] Remote Boot Address 2 */ - unsigned char psa_rem_boot_addr_3; /* [0x06] Remote Boot Address 3 */ - unsigned char psa_holi_params; /* [0x07] HOst Lan Interface (HOLI) Parameters */ - unsigned char psa_int_req_no; /* [0x08] Interrupt Request Line */ - unsigned char psa_unused0[7]; /* [0x09-0x0F] unused */ - - unsigned char psa_univ_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x10-0x15] Universal (factory) MAC Address */ - unsigned char psa_local_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x16-1B] Local MAC Address */ - unsigned char psa_univ_local_sel; /* [0x1C] Universal Local Selection */ -#define PSA_UNIVERSAL 0 /* Universal (factory) */ -#define PSA_LOCAL 1 /* Local */ - unsigned char psa_comp_number; /* [0x1D] Compatability Number: */ -#define PSA_COMP_PC_AT_915 0 /* PC-AT 915 MHz */ -#define PSA_COMP_PC_MC_915 1 /* PC-MC 915 MHz */ -#define PSA_COMP_PC_AT_2400 2 /* PC-AT 2.4 GHz */ -#define PSA_COMP_PC_MC_2400 3 /* PC-MC 2.4 GHz */ -#define PSA_COMP_PCMCIA_915 4 /* PCMCIA 915 MHz or 2.0 */ - unsigned char psa_thr_pre_set; /* [0x1E] Modem Threshold Preset */ - unsigned char psa_feature_select; /* [0x1F] Call code required (1=on) */ -#define PSA_FEATURE_CALL_CODE 0x01 /* Call code required (Japan) */ - unsigned char psa_subband; /* [0x20] Subband */ -#define PSA_SUBBAND_915 0 /* 915 MHz or 2.0 */ -#define PSA_SUBBAND_2425 1 /* 2425 MHz */ -#define PSA_SUBBAND_2460 2 /* 2460 MHz */ -#define PSA_SUBBAND_2484 3 /* 2484 MHz */ -#define PSA_SUBBAND_2430_5 4 /* 2430.5 MHz */ - unsigned char psa_quality_thr; /* [0x21] Modem Quality Threshold */ - unsigned char psa_mod_delay; /* [0x22] Modem Delay ??? (reserved) */ - unsigned char psa_nwid[2]; /* [0x23-0x24] Network ID */ - unsigned char psa_nwid_select; /* [0x25] Network ID Select On Off */ - unsigned char psa_encryption_select; /* [0x26] Encryption On Off */ - unsigned char psa_encryption_key[8]; /* [0x27-0x2E] Encryption Key */ - unsigned char psa_databus_width; /* [0x2F] AT bus width select 8/16 */ - unsigned char psa_call_code[8]; /* [0x30-0x37] (Japan) Call Code */ - unsigned char psa_nwid_prefix[2]; /* [0x38-0x39] Roaming domain */ - unsigned char psa_reserved[2]; /* [0x3A-0x3B] Reserved - fixed 00 */ - unsigned char psa_conf_status; /* [0x3C] Conf Status, bit 0=1:config*/ - unsigned char psa_crc[2]; /* [0x3D] CRC-16 over PSA */ - unsigned char psa_crc_status; /* [0x3F] CRC Valid Flag */ -}; - -/* Size for structure checking (if padding is correct) */ -#define PSA_SIZE 64 - -/* Calculate offset of a field in the above structure - * Warning : only even addresses are used */ -#define psaoff(p,f) ((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL)) - -/******************** MODEM MANAGEMENT INTERFACE ********************/ - -/* - * Modem Management Controller (MMC) write structure. - */ -typedef struct mmw_t mmw_t; -struct mmw_t -{ - unsigned char mmw_encr_key[8]; /* encryption key */ - unsigned char mmw_encr_enable; /* enable/disable encryption */ -#define MMW_ENCR_ENABLE_MODE 0x02 /* Mode of security option */ -#define MMW_ENCR_ENABLE_EN 0x01 /* Enable security option */ - unsigned char mmw_unused0[1]; /* unused */ - unsigned char mmw_des_io_invert; /* Encryption option */ -#define MMW_DES_IO_INVERT_RES 0x0F /* Reserved */ -#define MMW_DES_IO_INVERT_CTRL 0xF0 /* Control ??? (set to 0) */ - unsigned char mmw_unused1[5]; /* unused */ - unsigned char mmw_loopt_sel; /* looptest selection */ -#define MMW_LOOPT_SEL_DIS_NWID 0x40 /* disable NWID filtering */ -#define MMW_LOOPT_SEL_INT 0x20 /* activate Attention Request */ -#define MMW_LOOPT_SEL_LS 0x10 /* looptest w/o collision avoidance */ -#define MMW_LOOPT_SEL_LT3A 0x08 /* looptest 3a */ -#define MMW_LOOPT_SEL_LT3B 0x04 /* looptest 3b */ -#define MMW_LOOPT_SEL_LT3C 0x02 /* looptest 3c */ -#define MMW_LOOPT_SEL_LT3D 0x01 /* looptest 3d */ - unsigned char mmw_jabber_enable; /* jabber timer enable */ - /* Abort transmissions > 200 ms */ - unsigned char mmw_freeze; /* freeze / unfreeeze signal level */ - /* 0 : signal level & qual updated for every new message, 1 : frozen */ - unsigned char mmw_anten_sel; /* antenna selection */ -#define MMW_ANTEN_SEL_SEL 0x01 /* direct antenna selection */ -#define MMW_ANTEN_SEL_ALG_EN 0x02 /* antenna selection algo. enable */ - unsigned char mmw_ifs; /* inter frame spacing */ - /* min time between transmission in bit periods (.5 us) - bit 0 ignored */ - unsigned char mmw_mod_delay; /* modem delay (synchro) */ - unsigned char mmw_jam_time; /* jamming time (after collision) */ - unsigned char mmw_unused2[1]; /* unused */ - unsigned char mmw_thr_pre_set; /* level threshold preset */ - /* Discard all packet with signal < this value (4) */ - unsigned char mmw_decay_prm; /* decay parameters */ - unsigned char mmw_decay_updat_prm; /* decay update parameterz */ - unsigned char mmw_quality_thr; /* quality (z-quotient) threshold */ - /* Discard all packet with quality < this value (3) */ - unsigned char mmw_netw_id_l; /* NWID low order byte */ - unsigned char mmw_netw_id_h; /* NWID high order byte */ - /* Network ID or Domain : create virtual net on the air */ - - /* 2.0 Hardware extension - frequency selection support */ - unsigned char mmw_mode_select; /* for analog tests (set to 0) */ - unsigned char mmw_unused3[1]; /* unused */ - unsigned char mmw_fee_ctrl; /* frequency eeprom control */ -#define MMW_FEE_CTRL_PRE 0x10 /* Enable protected instructions */ -#define MMW_FEE_CTRL_DWLD 0x08 /* Download eeprom to mmc */ -#define MMW_FEE_CTRL_CMD 0x07 /* EEprom commands : */ -#define MMW_FEE_CTRL_READ 0x06 /* Read */ -#define MMW_FEE_CTRL_WREN 0x04 /* Write enable */ -#define MMW_FEE_CTRL_WRITE 0x05 /* Write data to address */ -#define MMW_FEE_CTRL_WRALL 0x04 /* Write data to all addresses */ -#define MMW_FEE_CTRL_WDS 0x04 /* Write disable */ -#define MMW_FEE_CTRL_PRREAD 0x16 /* Read addr from protect register */ -#define MMW_FEE_CTRL_PREN 0x14 /* Protect register enable */ -#define MMW_FEE_CTRL_PRCLEAR 0x17 /* Unprotect all registers */ -#define MMW_FEE_CTRL_PRWRITE 0x15 /* Write addr in protect register */ -#define MMW_FEE_CTRL_PRDS 0x14 /* Protect register disable */ - /* Never issue this command (PRDS) : it's irreversible !!! */ - - unsigned char mmw_fee_addr; /* EEprom address */ -#define MMW_FEE_ADDR_CHANNEL 0xF0 /* Select the channel */ -#define MMW_FEE_ADDR_OFFSET 0x0F /* Offset in channel data */ -#define MMW_FEE_ADDR_EN 0xC0 /* FEE_CTRL enable operations */ -#define MMW_FEE_ADDR_DS 0x00 /* FEE_CTRL disable operations */ -#define MMW_FEE_ADDR_ALL 0x40 /* FEE_CTRL all operations */ -#define MMW_FEE_ADDR_CLEAR 0xFF /* FEE_CTRL clear operations */ - - unsigned char mmw_fee_data_l; /* Write data to EEprom */ - unsigned char mmw_fee_data_h; /* high octet */ - unsigned char mmw_ext_ant; /* Setting for external antenna */ -#define MMW_EXT_ANT_EXTANT 0x01 /* Select external antenna */ -#define MMW_EXT_ANT_POL 0x02 /* Polarity of the antenna */ -#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */ -#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */ -#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */ -} __attribute__((packed)); - -/* Size for structure checking (if padding is correct) */ -#define MMW_SIZE 37 - -/* Calculate offset of a field in the above structure */ -#define mmwoff(p,f) (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0) - - -/* - * Modem Management Controller (MMC) read structure. - */ -typedef struct mmr_t mmr_t; -struct mmr_t -{ - unsigned char mmr_unused0[8]; /* unused */ - unsigned char mmr_des_status; /* encryption status */ - unsigned char mmr_des_avail; /* encryption available (0x55 read) */ -#define MMR_DES_AVAIL_DES 0x55 /* DES available */ -#define MMR_DES_AVAIL_AES 0x33 /* AES (AT&T) available */ - unsigned char mmr_des_io_invert; /* des I/O invert register */ - unsigned char mmr_unused1[5]; /* unused */ - unsigned char mmr_dce_status; /* DCE status */ -#define MMR_DCE_STATUS_RX_BUSY 0x01 /* receiver busy */ -#define MMR_DCE_STATUS_LOOPT_IND 0x02 /* loop test indicated */ -#define MMR_DCE_STATUS_TX_BUSY 0x04 /* transmitter on */ -#define MMR_DCE_STATUS_JBR_EXPIRED 0x08 /* jabber timer expired */ -#define MMR_DCE_STATUS 0x0F /* mask to get the bits */ - unsigned char mmr_dsp_id; /* DSP id (AA = Daedalus rev A) */ - unsigned char mmr_unused2[2]; /* unused */ - unsigned char mmr_correct_nwid_l; /* # of correct NWID's rxd (low) */ - unsigned char mmr_correct_nwid_h; /* # of correct NWID's rxd (high) */ - /* Warning : Read high order octet first !!! */ - unsigned char mmr_wrong_nwid_l; /* # of wrong NWID's rxd (low) */ - unsigned char mmr_wrong_nwid_h; /* # of wrong NWID's rxd (high) */ - unsigned char mmr_thr_pre_set; /* level threshold preset */ -#define MMR_THR_PRE_SET 0x3F /* level threshold preset */ -#define MMR_THR_PRE_SET_CUR 0x80 /* Current signal above it */ - unsigned char mmr_signal_lvl; /* signal level */ -#define MMR_SIGNAL_LVL 0x3F /* signal level */ -#define MMR_SIGNAL_LVL_VALID 0x80 /* Updated since last read */ - unsigned char mmr_silence_lvl; /* silence level (noise) */ -#define MMR_SILENCE_LVL 0x3F /* silence level */ -#define MMR_SILENCE_LVL_VALID 0x80 /* Updated since last read */ - unsigned char mmr_sgnl_qual; /* signal quality */ -#define MMR_SGNL_QUAL 0x0F /* signal quality */ -#define MMR_SGNL_QUAL_ANT 0x80 /* current antenna used */ - unsigned char mmr_netw_id_l; /* NWID low order byte ??? */ - unsigned char mmr_unused3[3]; /* unused */ - - /* 2.0 Hardware extension - frequency selection support */ - unsigned char mmr_fee_status; /* Status of frequency eeprom */ -#define MMR_FEE_STATUS_ID 0xF0 /* Modem revision id */ -#define MMR_FEE_STATUS_DWLD 0x08 /* Download in progress */ -#define MMR_FEE_STATUS_BUSY 0x04 /* EEprom busy */ - unsigned char mmr_unused4[1]; /* unused */ - unsigned char mmr_fee_data_l; /* Read data from eeprom (low) */ - unsigned char mmr_fee_data_h; /* Read data from eeprom (high) */ -}; - -/* Size for structure checking (if padding is correct) */ -#define MMR_SIZE 36 - -/* Calculate offset of a field in the above structure */ -#define mmroff(p,f) (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0) - - -/* Make the two above structures one */ -typedef union mm_t -{ - struct mmw_t w; /* Write to the mmc */ - struct mmr_t r; /* Read from the mmc */ -} mm_t; - -#endif /* _WAVELAN_CS_H */ diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h deleted file mode 100644 index 81d91531c4f9..000000000000 --- a/drivers/net/wireless/wavelan_cs.p.h +++ /dev/null @@ -1,766 +0,0 @@ -/* - * Wavelan Pcmcia driver - * - * Jean II - HPLB '96 - * - * Reorganisation and extension of the driver. - * - * This file contain all definition and declarations necessary for the - * wavelan pcmcia driver. This file is a private header, so it should - * be included only on wavelan_cs.c !!! - */ - -#ifndef WAVELAN_CS_P_H -#define WAVELAN_CS_P_H - -/************************** DOCUMENTATION **************************/ -/* - * This driver provide a Linux interface to the Wavelan Pcmcia hardware - * The Wavelan is a product of Lucent (http://www.wavelan.com/). - * This division was formerly part of NCR and then AT&T. - * Wavelan are also distributed by DEC (RoamAbout DS)... - * - * To know how to use this driver, read the PCMCIA HOWTO. - * If you want to exploit the many other fonctionalities, look comments - * in the code... - * - * This driver is the result of the effort of many peoples (see below). - */ - -/* ------------------------ SPECIFIC NOTES ------------------------ */ -/* - * Web page - * -------- - * I try to maintain a web page with the Wireless LAN Howto at : - * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html - * - * SMP - * --- - * We now are SMP compliant (I eventually fixed the remaining bugs). - * The driver has been tested on a dual P6-150 and survived my usual - * set of torture tests. - * Anyway, I spent enough time chasing interrupt re-entrancy during - * errors or reconfigure, and I designed the locked/unlocked sections - * of the driver with great care, and with the recent addition of - * the spinlock (thanks to the new API), we should be quite close to - * the truth. - * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast), - * but better safe than sorry (especially at 2 Mb/s ;-). - * - * I have also looked into disabling only our interrupt on the card - * (via HACR) instead of all interrupts in the processor (via cli), - * so that other driver are not impacted, and it look like it's - * possible, but it's very tricky to do right (full of races). As - * the gain would be mostly for SMP systems, it can wait... - * - * Debugging and options - * --------------------- - * You will find below a set of '#define" allowing a very fine control - * on the driver behaviour and the debug messages printed. - * The main options are : - * o WAVELAN_ROAMING, for the experimental roaming support. - * o SET_PSA_CRC, to have your card correctly recognised by - * an access point and the Point-to-Point diagnostic tool. - * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom) - * (otherwise we always start afresh with some defaults) - * - * wavelan_cs.o is darn too big - * ------------------------- - * That's true ! There is a very simple way to reduce the driver - * object by 33% (yes !). Comment out the following line : - * #include <linux/wireless.h> - * Other compile options can also reduce the size of it... - * - * MAC address and hardware detection : - * ---------------------------------- - * The detection code of the wavelan chech that the first 3 - * octets of the MAC address fit the company code. This type of - * detection work well for AT&T cards (because the AT&T code is - * hardcoded in wavelan_cs.h), but of course will fail for other - * manufacturer. - * - * If you are sure that your card is derived from the wavelan, - * here is the way to configure it : - * 1) Get your MAC address - * a) With your card utilities (wfreqsel, instconf, ...) - * b) With the driver : - * o compile the kernel with DEBUG_CONFIG_INFO enabled - * o Boot and look the card messages - * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan_cs.h) - * 3) Compile & verify - * 4) Send me the MAC code - I will include it in the next version... - * - */ - -/* --------------------- WIRELESS EXTENSIONS --------------------- */ -/* - * This driver is the first one to support "wireless extensions". - * This set of extensions provide you some way to control the wireless - * caracteristics of the hardware in a standard way and support for - * applications for taking advantage of it (like Mobile IP). - * - * It might be a good idea as well to fetch the wireless tools to - * configure the device and play a bit. - */ - -/* ---------------------------- FILES ---------------------------- */ -/* - * wavelan_cs.c : The actual code for the driver - C functions - * - * wavelan_cs.p.h : Private header : local types / vars for the driver - * - * wavelan_cs.h : Description of the hardware interface & structs - * - * i82593.h : Description if the Ethernet controller - */ - -/* --------------------------- HISTORY --------------------------- */ -/* - * The history of the Wavelan drivers is as complicated as history of - * the Wavelan itself (NCR -> AT&T -> Lucent). - * - * All started with Anders Klemets <klemets@paul.rutgers.edu>, - * writing a Wavelan ISA driver for the MACH microkernel. Girish - * Welling <welling@paul.rutgers.edu> had also worked on it. - * Keith Moore modify this for the Pcmcia hardware. - * - * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI - * and add specific Pcmcia support (there is currently no equivalent - * of the PCMCIA package under BSD...). - * - * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to FreeBSD. - * - * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux. - * - * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver - * (with help of the BSDI PCMCIA driver) for PCMCIA. - * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work. - * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start - * correctly 2.00 cards (2.4 GHz with frequency selection). - * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his - * Pcmcia package (+ bug corrections). - * - * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some - * patchs to the Pcmcia driver. After, I added code in the ISA driver - * for Wireless Extensions and full support of frequency selection - * cards. Now, I'm doing the same to the Pcmcia driver + some - * reorganisation. - * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me - * much needed informations on the Wavelan hardware. - */ - -/* By the way : for the copyright & legal stuff : - * Almost everybody wrote code under GNU or BSD license (or alike), - * and want that their original copyright remain somewhere in the - * code (for myself, I go with the GPL). - * Nobody want to take responsibility for anything, except the fame... - */ - -/* --------------------------- CREDITS --------------------------- */ -/* - * Credits: - * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and - * Loeke Brederveld of Lucent for providing extremely useful - * information about WaveLAN PCMCIA hardware - * - * This driver is based upon several other drivers, in particular: - * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter - * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter - * Anders Klemets' PCMCIA WaveLAN adapter driver - * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter - * - * Additional Credits: - * - * This software was originally developed under Linux 1.2.3 - * (Slackware 2.0 distribution). - * And then under Linux 2.0.x (Debian 1.1 -> 2.2 - pcmcia 2.8.18+) - * with an HP OmniBook 4000 and then a 5500. - * - * It is based on other device drivers and information either written - * or supplied by: - * James Ashton (jaa101@syseng.anu.edu.au), - * Ajay Bakre (bakre@paul.rutgers.edu), - * Donald Becker (becker@super.org), - * Jim Binkley <jrb@cs.pdx.edu>, - * Loeke Brederveld <lbrederv@wavelan.com>, - * Allan Creighton (allanc@cs.su.oz.au), - * Brent Elphick <belphick@uwaterloo.ca>, - * Joe Finney <joe@comp.lancs.ac.uk>, - * Matthew Geier (matthew@cs.su.oz.au), - * Remo di Giovanni (remo@cs.su.oz.au), - * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM), - * David Hinds <dahinds@users.sourceforge.net>, - * Jan Hoogendoorn (c/o marteijn@lucent.com), - * Bruce Janson <bruce@cs.usyd.edu.au>, - * Anthony D. Joseph <adj@lcs.mit.edu>, - * Anders Klemets (klemets@paul.rutgers.edu), - * Yunzhou Li <yunzhou@strat.iol.unh.edu>, - * Marc Meertens (mmeertens@lucent.com), - * Keith Moore, - * Robert Morris (rtm@das.harvard.edu), - * Ian Parkin (ian@cs.su.oz.au), - * John Rosenberg (johnr@cs.su.oz.au), - * George Rossi (george@phm.gov.au), - * Arthur Scott (arthur@cs.su.oz.au), - * Stanislav Sinyagin <stas@isf.ru> - * Peter Storey, - * Jean Tourrilhes <jt@hpl.hp.com>, - * Girish Welling (welling@paul.rutgers.edu) - * Clark Woodworth <clark@hiway1.exit109.com> - * Yongguang Zhang <ygz@isl.hrl.hac.com>... - */ - -/* ------------------------- IMPROVEMENTS ------------------------- */ -/* - * I proudly present : - * - * Changes made in 2.8.22 : - * ---------------------- - * - improved wv_set_multicast_list - * - catch spurious interrupt - * - correct release of the device - * - * Changes mades in release : - * ------------------------ - * - Reorganisation of the code, function name change - * - Creation of private header (wavelan_cs.h) - * - Reorganised debug messages - * - More comments, history, ... - * - Configure earlier (in "insert" instead of "open") - * and do things only once - * - mmc_init : configure the PSA if not done - * - mmc_init : 2.00 detection better code for 2.00 init - * - better info at startup - * - Correct a HUGE bug (volatile & uncalibrated busy loop) - * in wv_82593_cmd => config speedup - * - Stop receiving & power down on close (and power up on open) - * use "ifconfig down" & "ifconfig up ; route add -net ..." - * - Send packets : add watchdog instead of pooling - * - Receive : check frame wrap around & try to recover some frames - * - wavelan_set_multicast_list : avoid reset - * - add wireless extensions (ioctl & get_wireless_stats) - * get/set nwid/frequency on fly, info for /proc/net/wireless - * - Suppress useless stuff from lp (net_local), but add link - * - More inlines - * - Lot of others minor details & cleanups - * - * Changes made in second release : - * ------------------------------ - * - Optimise wv_85893_reconfig stuff, fix potential problems - * - Change error values for ioctl - * - Non blocking wv_ru_stop() + call wv_reset() in case of problems - * - Remove development printk from wavelan_watchdog() - * - Remove of the watchdog to wavelan_close instead of wavelan_release - * fix potential problems... - * - Start debugging suspend stuff (but it's still a bit weird) - * - Debug & optimize dump header/packet in Rx & Tx (debug) - * - Use "readb" and "writeb" to be kernel 2.1 compliant - * - Better handling of bogus interrupts - * - Wireless extension : SETSPY and GETSPY - * - Remove old stuff (stats - for those needing it, just ask me...) - * - Make wireless extensions optional - * - * Changes made in third release : - * ----------------------------- - * - cleanups & typos - * - modif wireless ext (spy -> only one pointer) - * - new private ioctl to set/get quality & level threshold - * - Init : correct default value of level threshold for pcmcia - * - kill watchdog in hw_reset - * - more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs) - * - Add message level (debug stuff in /var/adm/debug & errors not - * displayed at console and still in /var/adm/messages) - * - * Changes made in fourth release : - * ------------------------------ - * - multicast support (yes !) thanks to Yongguang Zhang. - * - * Changes made in fifth release (2.9.0) : - * ------------------------------------- - * - Revisited multicast code (it was mostly wrong). - * - protect code in wv_82593_reconfig with dev->tbusy (oups !) - * - * Changes made in sixth release (2.9.1a) : - * -------------------------------------- - * - Change the detection code for multi manufacturer code support - * - Correct bug (hang kernel) in init when we were "rejecting" a card - * - * Changes made in seventh release (2.9.1b) : - * ---------------------------------------- - * - Update to wireless extensions changes - * - Silly bug in card initial configuration (psa_conf_status) - * - * Changes made in eigth release : - * ----------------------------- - * - Small bug in debug code (probably not the last one...) - * - 1.2.13 support (thanks to Clark Woodworth) - * - * Changes made for release in 2.9.2b : - * ---------------------------------- - * - Level threshold is now a standard wireless extension (version 4 !) - * - modules parameters types for kernel > 2.1.17 - * - updated man page - * - Others cleanup from David Hinds - * - * Changes made for release in 2.9.5 : - * --------------------------------- - * - byte count stats (courtesy of David Hinds) - * - Remove dev_tint stuff (courtesy of David Hinds) - * - Others cleanup from David Hinds - * - Encryption setting from Brent Elphick (thanks a lot !) - * - 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin) - * - * Changes made for release in 2.9.6 : - * --------------------------------- - * - fix bug : no longuer disable watchdog in case of bogus interrupt - * - increase timeout in config code for picky hardware - * - mask unused bits in status (Wireless Extensions) - * - * Changes integrated by Justin Seger <jseger@MIT.EDU> & David Hinds : - * ----------------------------------------------------------------- - * - Roaming "hack" from Joe Finney <joe@comp.lancs.ac.uk> - * - PSA CRC code from Bob Gray <rgray@bald.cs.dartmouth.edu> - * - Better initialisation of the i82593 controller - * from Joseph K. O'Sullivan <josullvn+@cs.cmu.edu> - * - * Changes made for release in 3.0.10 : - * ---------------------------------- - * - Fix eject "hang" of the driver under 2.2.X : - * o create wv_flush_stale_links() - * o Rename wavelan_release to wv_pcmcia_release & move up - * o move unregister_netdev to wavelan_detach() - * o wavelan_release() no longer call wavelan_detach() - * o Suppress "release" timer - * o Other cleanups & fixes - * - New MAC address in the probe - * - Reorg PSA_CRC code (endian neutral & cleaner) - * - Correct initialisation of the i82593 from Lucent manual - * - Put back the watchdog, with larger timeout - * - TRANSMIT_NO_CRC is a "normal" error, so recover from it - * from Derrick J Brashear <shadow@dementia.org> - * - Better handling of TX and RX normal failure conditions - * - #ifdef out all the roaming code - * - Add ESSID & "AP current address" ioctl stubs - * - General cleanup of the code - * - * Changes made for release in 3.0.13 : - * ---------------------------------- - * - Re-enable compilation of roaming code by default, but with - * do_roaming = 0 - * - Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather - * at the demand of John Carol Langford <jcl@gs176.sp.cs.cmu.edu> - * - Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff. - * - * Changes made for release in 3.0.15 : - * ---------------------------------- - * - Change e-mail and web page addresses - * - Watchdog timer is now correctly expressed in HZ, not in jiffies - * - Add channel number to the list of frequencies in range - * - Add the (short) list of bit-rates in range - * - Developp a new sensitivity... (sens.value & sens.fixed) - * - * Changes made for release in 3.1.2 : - * --------------------------------- - * - Fix check for root permission (break instead of exit) - * - New nwid & encoding setting (Wireless Extension 9) - * - * Changes made for release in 3.1.12 : - * ---------------------------------- - * - reworked wv_82593_cmd to avoid using the IRQ handler and doing - * ugly things with interrupts. - * - Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog - * - Update to new network API (softnet - 2.3.43) : - * o replace dev->tbusy (David + me) - * o replace dev->tstart (David + me) - * o remove dev->interrupt (David) - * o add SMP locking via spinlock in splxx (me) - * o add spinlock in interrupt handler (me) - * o use kernel watchdog instead of ours (me) - * o verify that all the changes make sense and work (me) - * - Re-sync kernel/pcmcia versions (not much actually) - * - A few other cleanups (David & me)... - * - * Changes made for release in 3.1.22 : - * ---------------------------------- - * - Check that SMP works, remove annoying log message - * - * Changes made for release in 3.1.24 : - * ---------------------------------- - * - Fix unfrequent card lockup when watchdog was reseting the hardware : - * o control first busy loop in wv_82593_cmd() - * o Extend spinlock protection in wv_hw_config() - * - * Changes made for release in 3.1.33 : - * ---------------------------------- - * - Optional use new driver API for Wireless Extensions : - * o got rid of wavelan_ioctl() - * o use a bunch of iw_handler instead - * - * Changes made for release in 3.2.1 : - * --------------------------------- - * - Set dev->trans_start to avoid filling the logs - * (and generating useless abort commands) - * - Avoid deadlocks in mmc_out()/mmc_in() - * - * Wishes & dreams: - * ---------------- - * - Cleanup and integrate the roaming code - * (std debug, set DomainID, decay avg and co...) - */ - -/***************************** INCLUDES *****************************/ - -/* Linux headers that we need */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/in.h> -#include <linux/delay.h> -#include <linux/bitops.h> -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/system.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/ioport.h> -#include <linux/fcntl.h> -#include <linux/ethtool.h> -#include <linux/wireless.h> /* Wireless extensions */ -#include <net/iw_handler.h> /* New driver API */ - -/* Pcmcia headers that we need */ -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> -#include <pcmcia/cistpl.h> -#include <pcmcia/cisreg.h> -#include <pcmcia/ds.h> - -/* Wavelan declarations */ -#include "i82593.h" /* Definitions for the Intel chip */ - -#include "wavelan_cs.h" /* Others bits of the hardware */ - -/************************** DRIVER OPTIONS **************************/ -/* - * `#define' or `#undef' the following constant to change the behaviour - * of the driver... - */ -#define WAVELAN_ROAMING /* Include experimental roaming code */ -#undef WAVELAN_ROAMING_EXT /* Enable roaming wireless extensions */ -#undef SET_PSA_CRC /* Set the CRC in PSA (slower) */ -#define USE_PSA_CONFIG /* Use info from the PSA */ -#undef EEPROM_IS_PROTECTED /* Doesn't seem to be necessary */ -#define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical) */ -#undef SET_MAC_ADDRESS /* Experimental */ - -/* Warning : these stuff will slow down the driver... */ -#define WIRELESS_SPY /* Enable spying addresses */ -#undef HISTOGRAM /* Enable histogram of sig level... */ - -/****************************** DEBUG ******************************/ - -#undef DEBUG_MODULE_TRACE /* Module insertion/removal */ -#undef DEBUG_CALLBACK_TRACE /* Calls made by Linux */ -#undef DEBUG_INTERRUPT_TRACE /* Calls to handler */ -#undef DEBUG_INTERRUPT_INFO /* type of interrupt & so on */ -#define DEBUG_INTERRUPT_ERROR /* problems */ -#undef DEBUG_CONFIG_TRACE /* Trace the config functions */ -#undef DEBUG_CONFIG_INFO /* What's going on... */ -#define DEBUG_CONFIG_ERRORS /* Errors on configuration */ -#undef DEBUG_TX_TRACE /* Transmission calls */ -#undef DEBUG_TX_INFO /* Header of the transmitted packet */ -#undef DEBUG_TX_FAIL /* Normal failure conditions */ -#define DEBUG_TX_ERROR /* Unexpected conditions */ -#undef DEBUG_RX_TRACE /* Transmission calls */ -#undef DEBUG_RX_INFO /* Header of the transmitted packet */ -#undef DEBUG_RX_FAIL /* Normal failure conditions */ -#define DEBUG_RX_ERROR /* Unexpected conditions */ -#undef DEBUG_PACKET_DUMP /* Dump packet on the screen */ -#undef DEBUG_IOCTL_TRACE /* Misc call by Linux */ -#undef DEBUG_IOCTL_INFO /* Various debug info */ -#define DEBUG_IOCTL_ERROR /* What's going wrong */ -#define DEBUG_BASIC_SHOW /* Show basic startup info */ -#undef DEBUG_VERSION_SHOW /* Print version info */ -#undef DEBUG_PSA_SHOW /* Dump psa to screen */ -#undef DEBUG_MMC_SHOW /* Dump mmc to screen */ -#undef DEBUG_SHOW_UNUSED /* Show also unused fields */ -#undef DEBUG_I82593_SHOW /* Show i82593 status */ -#undef DEBUG_DEVICE_SHOW /* Show device parameters */ - -/************************ CONSTANTS & MACROS ************************/ - -#ifdef DEBUG_VERSION_SHOW -static const char *version = "wavelan_cs.c : v24 (SMP + wireless extensions) 11/1/02\n"; -#endif - -/* Watchdog temporisation */ -#define WATCHDOG_JIFFIES (256*HZ/100) - -/* Fix a bug in some old wireless extension definitions */ -#ifndef IW_ESSID_MAX_SIZE -#define IW_ESSID_MAX_SIZE 32 -#endif - -/* ------------------------ PRIVATE IOCTL ------------------------ */ - -#define SIOCSIPQTHR SIOCIWFIRSTPRIV /* Set quality threshold */ -#define SIOCGIPQTHR SIOCIWFIRSTPRIV + 1 /* Get quality threshold */ -#define SIOCSIPROAM SIOCIWFIRSTPRIV + 2 /* Set roaming state */ -#define SIOCGIPROAM SIOCIWFIRSTPRIV + 3 /* Get roaming state */ - -#define SIOCSIPHISTO SIOCIWFIRSTPRIV + 4 /* Set histogram ranges */ -#define SIOCGIPHISTO SIOCIWFIRSTPRIV + 5 /* Get histogram values */ - -/*************************** WaveLAN Roaming **************************/ -#ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */ - -#define WAVELAN_ROAMING_DEBUG 0 /* 1 = Trace of handover decisions */ - /* 2 = Info on each beacon rcvd... */ -#define MAX_WAVEPOINTS 7 /* Max visible at one time */ -#define WAVEPOINT_HISTORY 5 /* SNR sample history slow search */ -#define WAVEPOINT_FAST_HISTORY 2 /* SNR sample history fast search */ -#define SEARCH_THRESH_LOW 10 /* SNR to enter cell search */ -#define SEARCH_THRESH_HIGH 13 /* SNR to leave cell search */ -#define WAVELAN_ROAMING_DELTA 1 /* Hysteresis value (+/- SNR) */ -#define CELL_TIMEOUT 2*HZ /* in jiffies */ - -#define FAST_CELL_SEARCH 1 /* Boolean values... */ -#define NWID_PROMISC 1 /* for code clarity. */ - -typedef struct wavepoint_beacon -{ - unsigned char dsap, /* Unused */ - ssap, /* Unused */ - ctrl, /* Unused */ - O,U,I, /* Unused */ - spec_id1, /* Unused */ - spec_id2, /* Unused */ - pdu_type, /* Unused */ - seq; /* WavePoint beacon sequence number */ - __be16 domain_id, /* WavePoint Domain ID */ - nwid; /* WavePoint NWID */ -} wavepoint_beacon; - -typedef struct wavepoint_history -{ - unsigned short nwid; /* WavePoint's NWID */ - int average_slow; /* SNR running average */ - int average_fast; /* SNR running average */ - unsigned char sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */ - unsigned char qualptr; /* Index into ringbuffer */ - unsigned char last_seq; /* Last seq. no seen for WavePoint */ - struct wavepoint_history *next; /* Next WavePoint in table */ - struct wavepoint_history *prev; /* Previous WavePoint in table */ - unsigned long last_seen; /* Time of last beacon recvd, jiffies */ -} wavepoint_history; - -struct wavepoint_table -{ - wavepoint_history *head; /* Start of ringbuffer */ - int num_wavepoints; /* No. of WavePoints visible */ - unsigned char locked; /* Table lock */ -}; - -#endif /* WAVELAN_ROAMING */ - -/****************************** TYPES ******************************/ - -/* Shortcuts */ -typedef struct iw_statistics iw_stats; -typedef struct iw_quality iw_qual; -typedef struct iw_freq iw_freq; -typedef struct net_local net_local; -typedef struct timer_list timer_list; - -/* Basic types */ -typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */ - -/* - * Static specific data for the interface. - * - * For each network interface, Linux keep data in two structure. "device" - * keep the generic data (same format for everybody) and "net_local" keep - * the additional specific data. - */ -struct net_local -{ - dev_node_t node; /* ???? What is this stuff ???? */ - struct net_device * dev; /* Reverse link... */ - spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ - struct pcmcia_device * link; /* pcmcia structure */ - int nresets; /* Number of hw resets */ - u_char configured; /* If it is configured */ - u_char reconfig_82593; /* Need to reconfigure the controller */ - u_char promiscuous; /* Promiscuous mode */ - u_char allmulticast; /* All Multicast mode */ - int mc_count; /* Number of multicast addresses */ - - int stop; /* Current i82593 Stop Hit Register */ - int rfp; /* Last DMA machine receive pointer */ - int overrunning; /* Receiver overrun flag */ - - iw_stats wstats; /* Wireless specific stats */ - - struct iw_spy_data spy_data; - struct iw_public_data wireless_data; - -#ifdef HISTOGRAM - int his_number; /* Number of intervals */ - u_char his_range[16]; /* Boundaries of interval ]n-1; n] */ - u_long his_sum[16]; /* Sum in interval */ -#endif /* HISTOGRAM */ -#ifdef WAVELAN_ROAMING - u_long domain_id; /* Domain ID we lock on for roaming */ - int filter_domains; /* Check Domain ID of beacon found */ - struct wavepoint_table wavepoint_table; /* Table of visible WavePoints*/ - wavepoint_history * curr_point; /* Current wavepoint */ - int cell_search; /* Searching for new cell? */ - struct timer_list cell_timer; /* Garbage collection */ -#endif /* WAVELAN_ROAMING */ - void __iomem *mem; -}; - -/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */ -static inline u_char /* data */ - hasr_read(u_long); /* Read the host interface : base address */ -static void - hacr_write(u_long, /* Write to host interface : base address */ - u_char), /* data */ - hacr_write_slow(u_long, - u_char); -static void - psa_read(struct net_device *, /* Read the Parameter Storage Area */ - int, /* offset in PSA */ - u_char *, /* buffer to fill */ - int), /* size to read */ - psa_write(struct net_device *, /* Write to the PSA */ - int, /* Offset in psa */ - u_char *, /* Buffer in memory */ - int); /* Length of buffer */ -static void - mmc_out(u_long, /* Write 1 byte to the Modem Manag Control */ - u_short, - u_char), - mmc_write(u_long, /* Write n bytes to the MMC */ - u_char, - u_char *, - int); -static u_char /* Read 1 byte from the MMC */ - mmc_in(u_long, - u_short); -static void - mmc_read(u_long, /* Read n bytes from the MMC */ - u_char, - u_char *, - int), - fee_wait(u_long, /* Wait for frequency EEprom : base address */ - int, /* Base delay to wait for */ - int); /* Number of time to wait */ -static void - fee_read(u_long, /* Read the frequency EEprom : base address */ - u_short, /* destination offset */ - u_short *, /* data buffer */ - int); /* number of registers */ -/* ---------------------- I82593 SUBROUTINES ----------------------- */ -static int - wv_82593_cmd(struct net_device *, /* synchronously send a command to i82593 */ - char *, - int, - int); -static inline int - wv_diag(struct net_device *); /* Diagnostique the i82593 */ -static int - read_ringbuf(struct net_device *, /* Read a receive buffer */ - int, - char *, - int); -static void - wv_82593_reconfig(struct net_device *); /* Reconfigure the controller */ -/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */ -static void - wv_init_info(struct net_device *); /* display startup info */ -/* ------------------- IOCTL, STATS & RECONFIG ------------------- */ -static iw_stats * - wavelan_get_wireless_stats(struct net_device *); -/* ----------------------- PACKET RECEPTION ----------------------- */ -static int - wv_start_of_frame(struct net_device *, /* Seek beggining of current frame */ - int, /* end of frame */ - int); /* start of buffer */ -static void - wv_packet_read(struct net_device *, /* Read a packet from a frame */ - int, - int), - wv_packet_rcv(struct net_device *); /* Read all packets waiting */ -/* --------------------- PACKET TRANSMISSION --------------------- */ -static void - wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer */ - void *, - short); -static netdev_tx_t - wavelan_packet_xmit(struct sk_buff *, /* Send a packet */ - struct net_device *); -/* -------------------- HARDWARE CONFIGURATION -------------------- */ -static int - wv_mmc_init(struct net_device *); /* Initialize the modem */ -static int - wv_ru_stop(struct net_device *), /* Stop the i82593 receiver unit */ - wv_ru_start(struct net_device *); /* Start the i82593 receiver unit */ -static int - wv_82593_config(struct net_device *); /* Configure the i82593 */ -static int - wv_pcmcia_reset(struct net_device *); /* Reset the pcmcia interface */ -static int - wv_hw_config(struct net_device *); /* Reset & configure the whole hardware */ -static void - wv_hw_reset(struct net_device *); /* Same, + start receiver unit */ -static int - wv_pcmcia_config(struct pcmcia_device *); /* Configure the pcmcia interface */ -static void - wv_pcmcia_release(struct pcmcia_device *);/* Remove a device */ -/* ---------------------- INTERRUPT HANDLING ---------------------- */ -static irqreturn_t - wavelan_interrupt(int, /* Interrupt handler */ - void *); -static void - wavelan_watchdog(struct net_device *); /* Transmission watchdog */ -/* ------------------- CONFIGURATION CALLBACKS ------------------- */ -static int - wavelan_open(struct net_device *), /* Open the device */ - wavelan_close(struct net_device *); /* Close the device */ -static void - wavelan_detach(struct pcmcia_device *p_dev); /* Destroy a removed device */ - -/**************************** VARIABLES ****************************/ - -/* - * Parameters that can be set with 'insmod' - * The exact syntax is 'insmod wavelan_cs.o <var>=<value>' - */ - -/* Shared memory speed, in ns */ -static int mem_speed = 0; - -/* New module interface */ -module_param(mem_speed, int, 0); - -#ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */ -/* Enable roaming mode ? No ! Please keep this to 0 */ -static int do_roaming = 0; -module_param(do_roaming, bool, 0); -#endif /* WAVELAN_ROAMING */ - -MODULE_LICENSE("GPL"); - -#endif /* WAVELAN_CS_P_H */ - |